| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * SGI Volume Button interface driver |
| * |
| * Copyright (C) 2008 Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
| */ |
| #include <linux/input.h> |
| #include <linux/ioport.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| |
| #ifdef CONFIG_SGI_IP22 |
| #include <asm/sgi/ioc.h> |
| |
| static inline u8 button_status(void) |
| { |
| u8 status; |
| |
| status = readb(&sgioc->panel) ^ 0xa0; |
| return ((status & 0x80) >> 6) | ((status & 0x20) >> 5); |
| } |
| #endif |
| |
| #ifdef CONFIG_SGI_IP32 |
| #include <asm/ip32/mace.h> |
| |
| static inline u8 button_status(void) |
| { |
| u64 status; |
| |
| status = readq(&mace->perif.audio.control); |
| writeq(status & ~(3U << 23), &mace->perif.audio.control); |
| |
| return (status >> 23) & 3; |
| } |
| #endif |
| |
| #define BUTTONS_POLL_INTERVAL 30 /* msec */ |
| #define BUTTONS_COUNT_THRESHOLD 3 |
| |
| static const unsigned short sgi_map[] = { |
| KEY_VOLUMEDOWN, |
| KEY_VOLUMEUP |
| }; |
| |
| struct buttons_dev { |
| unsigned short keymap[ARRAY_SIZE(sgi_map)]; |
| int count[ARRAY_SIZE(sgi_map)]; |
| }; |
| |
| static void handle_buttons(struct input_dev *input) |
| { |
| struct buttons_dev *bdev = input_get_drvdata(input); |
| u8 status; |
| int i; |
| |
| status = button_status(); |
| |
| for (i = 0; i < ARRAY_SIZE(bdev->keymap); i++) { |
| if (status & (1U << i)) { |
| if (++bdev->count[i] == BUTTONS_COUNT_THRESHOLD) { |
| input_event(input, EV_MSC, MSC_SCAN, i); |
| input_report_key(input, bdev->keymap[i], 1); |
| input_sync(input); |
| } |
| } else { |
| if (bdev->count[i] >= BUTTONS_COUNT_THRESHOLD) { |
| input_event(input, EV_MSC, MSC_SCAN, i); |
| input_report_key(input, bdev->keymap[i], 0); |
| input_sync(input); |
| } |
| bdev->count[i] = 0; |
| } |
| } |
| } |
| |
| static int sgi_buttons_probe(struct platform_device *pdev) |
| { |
| struct buttons_dev *bdev; |
| struct input_dev *input; |
| int error, i; |
| |
| bdev = devm_kzalloc(&pdev->dev, sizeof(*bdev), GFP_KERNEL); |
| if (!bdev) |
| return -ENOMEM; |
| |
| input = devm_input_allocate_device(&pdev->dev); |
| if (!input) |
| return -ENOMEM; |
| |
| memcpy(bdev->keymap, sgi_map, sizeof(bdev->keymap)); |
| |
| input_set_drvdata(input, bdev); |
| |
| input->name = "SGI buttons"; |
| input->phys = "sgi/input0"; |
| input->id.bustype = BUS_HOST; |
| |
| input->keycode = bdev->keymap; |
| input->keycodemax = ARRAY_SIZE(bdev->keymap); |
| input->keycodesize = sizeof(unsigned short); |
| |
| input_set_capability(input, EV_MSC, MSC_SCAN); |
| __set_bit(EV_KEY, input->evbit); |
| for (i = 0; i < ARRAY_SIZE(sgi_map); i++) |
| __set_bit(bdev->keymap[i], input->keybit); |
| __clear_bit(KEY_RESERVED, input->keybit); |
| |
| error = input_setup_polling(input, handle_buttons); |
| if (error) |
| return error; |
| |
| input_set_poll_interval(input, BUTTONS_POLL_INTERVAL); |
| |
| error = input_register_device(input); |
| if (error) |
| return error; |
| |
| return 0; |
| } |
| |
| static struct platform_driver sgi_buttons_driver = { |
| .probe = sgi_buttons_probe, |
| .driver = { |
| .name = "sgibtns", |
| }, |
| }; |
| module_platform_driver(sgi_buttons_driver); |
| |
| MODULE_LICENSE("GPL"); |