| // SPDX-License-Identifier: GPL-2.0-only |
| /* linux/drivers/mtd/maps/scx200_docflash.c |
| |
| Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com> |
| |
| National Semiconductor SCx200 flash mapped with DOCCS |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <asm/io.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/map.h> |
| #include <linux/mtd/partitions.h> |
| |
| #include <linux/pci.h> |
| #include <linux/scx200.h> |
| |
| #define NAME "scx200_docflash" |
| |
| MODULE_AUTHOR("Christer Weinigel <wingel@hack.org>"); |
| MODULE_DESCRIPTION("NatSemi SCx200 DOCCS Flash Driver"); |
| MODULE_LICENSE("GPL"); |
| |
| static int probe = 0; /* Don't autoprobe */ |
| static unsigned size = 0x1000000; /* 16 MiB the whole ISA address space */ |
| static unsigned width = 8; /* Default to 8 bits wide */ |
| static char *flashtype = "cfi_probe"; |
| |
| module_param(probe, int, 0); |
| MODULE_PARM_DESC(probe, "Probe for a BIOS mapping"); |
| module_param(size, int, 0); |
| MODULE_PARM_DESC(size, "Size of the flash mapping"); |
| module_param(width, int, 0); |
| MODULE_PARM_DESC(width, "Data width of the flash mapping (8/16)"); |
| module_param(flashtype, charp, 0); |
| MODULE_PARM_DESC(flashtype, "Type of MTD probe to do"); |
| |
| static struct resource docmem = { |
| .flags = IORESOURCE_MEM, |
| .name = "NatSemi SCx200 DOCCS Flash", |
| }; |
| |
| static struct mtd_info *mymtd; |
| |
| static struct mtd_partition partition_info[] = { |
| { |
| .name = "DOCCS Boot kernel", |
| .offset = 0, |
| .size = 0xc0000 |
| }, |
| { |
| .name = "DOCCS Low BIOS", |
| .offset = 0xc0000, |
| .size = 0x40000 |
| }, |
| { |
| .name = "DOCCS File system", |
| .offset = 0x100000, |
| .size = ~0 /* calculate from flash size */ |
| }, |
| { |
| .name = "DOCCS High BIOS", |
| .offset = ~0, /* calculate from flash size */ |
| .size = 0x80000 |
| }, |
| }; |
| #define NUM_PARTITIONS ARRAY_SIZE(partition_info) |
| |
| static struct map_info scx200_docflash_map = { |
| .name = "NatSemi SCx200 DOCCS Flash", |
| }; |
| |
| static int __init init_scx200_docflash(void) |
| { |
| unsigned u; |
| unsigned base; |
| unsigned ctrl; |
| unsigned pmr; |
| struct pci_dev *bridge; |
| |
| printk(KERN_DEBUG NAME ": NatSemi SCx200 DOCCS Flash Driver\n"); |
| |
| if ((bridge = pci_get_device(PCI_VENDOR_ID_NS, |
| PCI_DEVICE_ID_NS_SCx200_BRIDGE, |
| NULL)) == NULL) |
| return -ENODEV; |
| |
| /* check that we have found the configuration block */ |
| if (!scx200_cb_present()) { |
| pci_dev_put(bridge); |
| return -ENODEV; |
| } |
| |
| if (probe) { |
| /* Try to use the present flash mapping if any */ |
| pci_read_config_dword(bridge, SCx200_DOCCS_BASE, &base); |
| pci_read_config_dword(bridge, SCx200_DOCCS_CTRL, &ctrl); |
| pci_dev_put(bridge); |
| |
| pmr = inl(scx200_cb_base + SCx200_PMR); |
| |
| if (base == 0 |
| || (ctrl & 0x07000000) != 0x07000000 |
| || (ctrl & 0x0007ffff) == 0) |
| return -ENODEV; |
| |
| size = ((ctrl&0x1fff)<<13) + (1<<13); |
| |
| for (u = size; u > 1; u >>= 1) |
| ; |
| if (u != 1) |
| return -ENODEV; |
| |
| if (pmr & (1<<6)) |
| width = 16; |
| else |
| width = 8; |
| |
| docmem.start = base; |
| docmem.end = base + size; |
| |
| if (request_resource(&iomem_resource, &docmem)) { |
| printk(KERN_ERR NAME ": unable to allocate memory for flash mapping\n"); |
| return -ENOMEM; |
| } |
| } else { |
| pci_dev_put(bridge); |
| for (u = size; u > 1; u >>= 1) |
| ; |
| if (u != 1) { |
| printk(KERN_ERR NAME ": invalid size for flash mapping\n"); |
| return -EINVAL; |
| } |
| |
| if (width != 8 && width != 16) { |
| printk(KERN_ERR NAME ": invalid bus width for flash mapping\n"); |
| return -EINVAL; |
| } |
| |
| if (allocate_resource(&iomem_resource, &docmem, |
| size, |
| 0xc0000000, 0xffffffff, |
| size, NULL, NULL)) { |
| printk(KERN_ERR NAME ": unable to allocate memory for flash mapping\n"); |
| return -ENOMEM; |
| } |
| |
| ctrl = 0x07000000 | ((size-1) >> 13); |
| |
| printk(KERN_INFO "DOCCS BASE=0x%08lx, CTRL=0x%08lx\n", (long)docmem.start, (long)ctrl); |
| |
| pci_write_config_dword(bridge, SCx200_DOCCS_BASE, docmem.start); |
| pci_write_config_dword(bridge, SCx200_DOCCS_CTRL, ctrl); |
| pmr = inl(scx200_cb_base + SCx200_PMR); |
| |
| if (width == 8) { |
| pmr &= ~(1<<6); |
| } else { |
| pmr |= (1<<6); |
| } |
| outl(pmr, scx200_cb_base + SCx200_PMR); |
| } |
| |
| printk(KERN_INFO NAME ": DOCCS mapped at %pR, width %d\n", |
| &docmem, width); |
| |
| scx200_docflash_map.size = size; |
| if (width == 8) |
| scx200_docflash_map.bankwidth = 1; |
| else |
| scx200_docflash_map.bankwidth = 2; |
| |
| simple_map_init(&scx200_docflash_map); |
| |
| scx200_docflash_map.phys = docmem.start; |
| scx200_docflash_map.virt = ioremap(docmem.start, scx200_docflash_map.size); |
| if (!scx200_docflash_map.virt) { |
| printk(KERN_ERR NAME ": failed to ioremap the flash\n"); |
| release_resource(&docmem); |
| return -EIO; |
| } |
| |
| mymtd = do_map_probe(flashtype, &scx200_docflash_map); |
| if (!mymtd) { |
| printk(KERN_ERR NAME ": unable to detect flash\n"); |
| iounmap(scx200_docflash_map.virt); |
| release_resource(&docmem); |
| return -ENXIO; |
| } |
| |
| if (size < mymtd->size) |
| printk(KERN_WARNING NAME ": warning, flash mapping is smaller than flash size\n"); |
| |
| mymtd->owner = THIS_MODULE; |
| |
| partition_info[3].offset = mymtd->size-partition_info[3].size; |
| partition_info[2].size = partition_info[3].offset-partition_info[2].offset; |
| mtd_device_register(mymtd, partition_info, NUM_PARTITIONS); |
| |
| return 0; |
| } |
| |
| static void __exit cleanup_scx200_docflash(void) |
| { |
| if (mymtd) { |
| mtd_device_unregister(mymtd); |
| map_destroy(mymtd); |
| } |
| if (scx200_docflash_map.virt) { |
| iounmap(scx200_docflash_map.virt); |
| release_resource(&docmem); |
| } |
| } |
| |
| module_init(init_scx200_docflash); |
| module_exit(cleanup_scx200_docflash); |