| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* Aquantia Corp. Aquantia AQtion USB to 5GbE Controller |
| * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com> |
| * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net> |
| * Copyright (C) 2002-2003 TiVo Inc. |
| * Copyright (C) 2017-2018 ASIX |
| * Copyright (C) 2018 Aquantia Corp. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/netdevice.h> |
| #include <linux/ethtool.h> |
| #include <linux/mii.h> |
| #include <linux/usb.h> |
| #include <linux/crc32.h> |
| #include <linux/if_vlan.h> |
| #include <linux/usb/cdc.h> |
| #include <linux/usb/usbnet.h> |
| #include <linux/linkmode.h> |
| |
| #include "aqc111.h" |
| |
| #define DRIVER_NAME "aqc111" |
| |
| static int aqc111_read_cmd_nopm(struct usbnet *dev, u8 cmd, u16 value, |
| u16 index, u16 size, void *data) |
| { |
| int ret; |
| |
| ret = usbnet_read_cmd_nopm(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | |
| USB_RECIP_DEVICE, value, index, data, size); |
| |
| if (unlikely(ret < 0)) |
| netdev_warn(dev->net, |
| "Failed to read(0x%x) reg index 0x%04x: %d\n", |
| cmd, index, ret); |
| |
| return ret; |
| } |
| |
| static int aqc111_read_cmd(struct usbnet *dev, u8 cmd, u16 value, |
| u16 index, u16 size, void *data) |
| { |
| int ret; |
| |
| ret = usbnet_read_cmd(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | |
| USB_RECIP_DEVICE, value, index, data, size); |
| |
| if (unlikely(ret < 0)) |
| netdev_warn(dev->net, |
| "Failed to read(0x%x) reg index 0x%04x: %d\n", |
| cmd, index, ret); |
| |
| return ret; |
| } |
| |
| static int aqc111_read16_cmd_nopm(struct usbnet *dev, u8 cmd, u16 value, |
| u16 index, u16 *data) |
| { |
| int ret = 0; |
| |
| ret = aqc111_read_cmd_nopm(dev, cmd, value, index, sizeof(*data), data); |
| le16_to_cpus(data); |
| |
| return ret; |
| } |
| |
| static int aqc111_read16_cmd(struct usbnet *dev, u8 cmd, u16 value, |
| u16 index, u16 *data) |
| { |
| int ret = 0; |
| |
| ret = aqc111_read_cmd(dev, cmd, value, index, sizeof(*data), data); |
| le16_to_cpus(data); |
| |
| return ret; |
| } |
| |
| static int __aqc111_write_cmd(struct usbnet *dev, u8 cmd, u8 reqtype, |
| u16 value, u16 index, u16 size, const void *data) |
| { |
| int err = -ENOMEM; |
| void *buf = NULL; |
| |
| netdev_dbg(dev->net, |
| "%s cmd=%#x reqtype=%#x value=%#x index=%#x size=%d\n", |
| __func__, cmd, reqtype, value, index, size); |
| |
| if (data) { |
| buf = kmemdup(data, size, GFP_KERNEL); |
| if (!buf) |
| goto out; |
| } |
| |
| err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), |
| cmd, reqtype, value, index, buf, size, |
| (cmd == AQ_PHY_POWER) ? AQ_USB_PHY_SET_TIMEOUT : |
| AQ_USB_SET_TIMEOUT); |
| |
| if (unlikely(err < 0)) |
| netdev_warn(dev->net, |
| "Failed to write(0x%x) reg index 0x%04x: %d\n", |
| cmd, index, err); |
| kfree(buf); |
| |
| out: |
| return err; |
| } |
| |
| static int aqc111_write_cmd_nopm(struct usbnet *dev, u8 cmd, u16 value, |
| u16 index, u16 size, void *data) |
| { |
| int ret; |
| |
| ret = __aqc111_write_cmd(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | |
| USB_RECIP_DEVICE, value, index, size, data); |
| |
| return ret; |
| } |
| |
| static int aqc111_write_cmd(struct usbnet *dev, u8 cmd, u16 value, |
| u16 index, u16 size, void *data) |
| { |
| int ret; |
| |
| if (usb_autopm_get_interface(dev->intf) < 0) |
| return -ENODEV; |
| |
| ret = __aqc111_write_cmd(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | |
| USB_RECIP_DEVICE, value, index, size, data); |
| |
| usb_autopm_put_interface(dev->intf); |
| |
| return ret; |
| } |
| |
| static int aqc111_write16_cmd_nopm(struct usbnet *dev, u8 cmd, u16 value, |
| u16 index, u16 *data) |
| { |
| u16 tmp = *data; |
| |
| cpu_to_le16s(&tmp); |
| |
| return aqc111_write_cmd_nopm(dev, cmd, value, index, sizeof(tmp), &tmp); |
| } |
| |
| static int aqc111_write16_cmd(struct usbnet *dev, u8 cmd, u16 value, |
| u16 index, u16 *data) |
| { |
| u16 tmp = *data; |
| |
| cpu_to_le16s(&tmp); |
| |
| return aqc111_write_cmd(dev, cmd, value, index, sizeof(tmp), &tmp); |
| } |
| |
| static int aqc111_write32_cmd_nopm(struct usbnet *dev, u8 cmd, u16 value, |
| u16 index, u32 *data) |
| { |
| u32 tmp = *data; |
| |
| cpu_to_le32s(&tmp); |
| |
| return aqc111_write_cmd_nopm(dev, cmd, value, index, sizeof(tmp), &tmp); |
| } |
| |
| static int aqc111_write32_cmd(struct usbnet *dev, u8 cmd, u16 value, |
| u16 index, u32 *data) |
| { |
| u32 tmp = *data; |
| |
| cpu_to_le32s(&tmp); |
| |
| return aqc111_write_cmd(dev, cmd, value, index, sizeof(tmp), &tmp); |
| } |
| |
| static int aqc111_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, |
| u16 index, u16 size, void *data) |
| { |
| return usbnet_write_cmd_async(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | |
| USB_RECIP_DEVICE, value, index, data, |
| size); |
| } |
| |
| static int aqc111_write16_cmd_async(struct usbnet *dev, u8 cmd, u16 value, |
| u16 index, u16 *data) |
| { |
| u16 tmp = *data; |
| |
| cpu_to_le16s(&tmp); |
| |
| return aqc111_write_cmd_async(dev, cmd, value, index, |
| sizeof(tmp), &tmp); |
| } |
| |
| static void aqc111_get_drvinfo(struct net_device *net, |
| struct ethtool_drvinfo *info) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| struct aqc111_data *aqc111_data = dev->driver_priv; |
| |
| /* Inherit standard device info */ |
| usbnet_get_drvinfo(net, info); |
| strlcpy(info->driver, DRIVER_NAME, sizeof(info->driver)); |
| snprintf(info->fw_version, sizeof(info->fw_version), "%u.%u.%u", |
| aqc111_data->fw_ver.major, |
| aqc111_data->fw_ver.minor, |
| aqc111_data->fw_ver.rev); |
| info->eedump_len = 0x00; |
| info->regdump_len = 0x00; |
| } |
| |
| static void aqc111_get_wol(struct net_device *net, |
| struct ethtool_wolinfo *wolinfo) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| struct aqc111_data *aqc111_data = dev->driver_priv; |
| |
| wolinfo->supported = WAKE_MAGIC; |
| wolinfo->wolopts = 0; |
| |
| if (aqc111_data->wol_flags & AQ_WOL_FLAG_MP) |
| wolinfo->wolopts |= WAKE_MAGIC; |
| } |
| |
| static int aqc111_set_wol(struct net_device *net, |
| struct ethtool_wolinfo *wolinfo) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| struct aqc111_data *aqc111_data = dev->driver_priv; |
| |
| if (wolinfo->wolopts & ~WAKE_MAGIC) |
| return -EINVAL; |
| |
| aqc111_data->wol_flags = 0; |
| if (wolinfo->wolopts & WAKE_MAGIC) |
| aqc111_data->wol_flags |= AQ_WOL_FLAG_MP; |
| |
| return 0; |
| } |
| |
| static void aqc111_speed_to_link_mode(u32 speed, |
| struct ethtool_link_ksettings *elk) |
| { |
| switch (speed) { |
| case SPEED_5000: |
| ethtool_link_ksettings_add_link_mode(elk, advertising, |
| 5000baseT_Full); |
| break; |
| case SPEED_2500: |
| ethtool_link_ksettings_add_link_mode(elk, advertising, |
| 2500baseT_Full); |
| break; |
| case SPEED_1000: |
| ethtool_link_ksettings_add_link_mode(elk, advertising, |
| 1000baseT_Full); |
| break; |
| case SPEED_100: |
| ethtool_link_ksettings_add_link_mode(elk, advertising, |
| 100baseT_Full); |
| break; |
| } |
| } |
| |
| static int aqc111_get_link_ksettings(struct net_device *net, |
| struct ethtool_link_ksettings *elk) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| struct aqc111_data *aqc111_data = dev->driver_priv; |
| enum usb_device_speed usb_speed = dev->udev->speed; |
| u32 speed = SPEED_UNKNOWN; |
| |
| ethtool_link_ksettings_zero_link_mode(elk, supported); |
| ethtool_link_ksettings_add_link_mode(elk, supported, |
| 100baseT_Full); |
| ethtool_link_ksettings_add_link_mode(elk, supported, |
| 1000baseT_Full); |
| if (usb_speed == USB_SPEED_SUPER) { |
| ethtool_link_ksettings_add_link_mode(elk, supported, |
| 2500baseT_Full); |
| ethtool_link_ksettings_add_link_mode(elk, supported, |
| 5000baseT_Full); |
| } |
| ethtool_link_ksettings_add_link_mode(elk, supported, TP); |
| ethtool_link_ksettings_add_link_mode(elk, supported, Autoneg); |
| |
| elk->base.port = PORT_TP; |
| elk->base.transceiver = XCVR_INTERNAL; |
| |
| elk->base.mdio_support = 0x00; /*Not supported*/ |
| |
| if (aqc111_data->autoneg) |
| linkmode_copy(elk->link_modes.advertising, |
| elk->link_modes.supported); |
| else |
| aqc111_speed_to_link_mode(aqc111_data->advertised_speed, elk); |
| |
| elk->base.autoneg = aqc111_data->autoneg; |
| |
| switch (aqc111_data->link_speed) { |
| case AQ_INT_SPEED_5G: |
| speed = SPEED_5000; |
| break; |
| case AQ_INT_SPEED_2_5G: |
| speed = SPEED_2500; |
| break; |
| case AQ_INT_SPEED_1G: |
| speed = SPEED_1000; |
| break; |
| case AQ_INT_SPEED_100M: |
| speed = SPEED_100; |
| break; |
| } |
| elk->base.duplex = DUPLEX_FULL; |
| elk->base.speed = speed; |
| |
| return 0; |
| } |
| |
| static void aqc111_set_phy_speed(struct usbnet *dev, u8 autoneg, u16 speed) |
| { |
| struct aqc111_data *aqc111_data = dev->driver_priv; |
| |
| aqc111_data->phy_cfg &= ~AQ_ADV_MASK; |
| aqc111_data->phy_cfg |= AQ_PAUSE; |
| aqc111_data->phy_cfg |= AQ_ASYM_PAUSE; |
| aqc111_data->phy_cfg |= AQ_DOWNSHIFT; |
| aqc111_data->phy_cfg &= ~AQ_DSH_RETRIES_MASK; |
| aqc111_data->phy_cfg |= (3 << AQ_DSH_RETRIES_SHIFT) & |
| AQ_DSH_RETRIES_MASK; |
| |
| if (autoneg == AUTONEG_ENABLE) { |
| switch (speed) { |
| case SPEED_5000: |
| aqc111_data->phy_cfg |= AQ_ADV_5G; |
| fallthrough; |
| case SPEED_2500: |
| aqc111_data->phy_cfg |= AQ_ADV_2G5; |
| fallthrough; |
| case SPEED_1000: |
| aqc111_data->phy_cfg |= AQ_ADV_1G; |
| fallthrough; |
| case SPEED_100: |
| aqc111_data->phy_cfg |= AQ_ADV_100M; |
| /* fall-through */ |
| } |
| } else { |
| switch (speed) { |
| case SPEED_5000: |
| aqc111_data->phy_cfg |= AQ_ADV_5G; |
| break; |
| case SPEED_2500: |
| aqc111_data->phy_cfg |= AQ_ADV_2G5; |
| break; |
| case SPEED_1000: |
| aqc111_data->phy_cfg |= AQ_ADV_1G; |
| break; |
| case SPEED_100: |
| aqc111_data->phy_cfg |= AQ_ADV_100M; |
| break; |
| } |
| } |
| |
| aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0, &aqc111_data->phy_cfg); |
| } |
| |
| static int aqc111_set_link_ksettings(struct net_device *net, |
| const struct ethtool_link_ksettings *elk) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| struct aqc111_data *aqc111_data = dev->driver_priv; |
| enum usb_device_speed usb_speed = dev->udev->speed; |
| u8 autoneg = elk->base.autoneg; |
| u32 speed = elk->base.speed; |
| |
| if (autoneg == AUTONEG_ENABLE) { |
| if (aqc111_data->autoneg != AUTONEG_ENABLE) { |
| aqc111_data->autoneg = AUTONEG_ENABLE; |
| aqc111_data->advertised_speed = |
| (usb_speed == USB_SPEED_SUPER) ? |
| SPEED_5000 : SPEED_1000; |
| aqc111_set_phy_speed(dev, aqc111_data->autoneg, |
| aqc111_data->advertised_speed); |
| } |
| } else { |
| if (speed != SPEED_100 && |
| speed != SPEED_1000 && |
| speed != SPEED_2500 && |
| speed != SPEED_5000 && |
| speed != SPEED_UNKNOWN) |
| return -EINVAL; |
| |
| if (elk->base.duplex != DUPLEX_FULL) |
| return -EINVAL; |
| |
| if (usb_speed != USB_SPEED_SUPER && speed > SPEED_1000) |
| return -EINVAL; |
| |
| aqc111_data->autoneg = AUTONEG_DISABLE; |
| if (speed != SPEED_UNKNOWN) |
| aqc111_data->advertised_speed = speed; |
| |
| aqc111_set_phy_speed(dev, aqc111_data->autoneg, |
| aqc111_data->advertised_speed); |
| } |
| |
| return 0; |
| } |
| |
| static const struct ethtool_ops aqc111_ethtool_ops = { |
| .get_drvinfo = aqc111_get_drvinfo, |
| .get_wol = aqc111_get_wol, |
| .set_wol = aqc111_set_wol, |
| .get_msglevel = usbnet_get_msglevel, |
| .set_msglevel = usbnet_set_msglevel, |
| .get_link = ethtool_op_get_link, |
| .get_link_ksettings = aqc111_get_link_ksettings, |
| .set_link_ksettings = aqc111_set_link_ksettings |
| }; |
| |
| static int aqc111_change_mtu(struct net_device *net, int new_mtu) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| u16 reg16 = 0; |
| u8 buf[5]; |
| |
| net->mtu = new_mtu; |
| dev->hard_mtu = net->mtu + net->hard_header_len; |
| |
| aqc111_read16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE, |
| 2, ®16); |
| if (net->mtu > 1500) |
| reg16 |= SFR_MEDIUM_JUMBO_EN; |
| else |
| reg16 &= ~SFR_MEDIUM_JUMBO_EN; |
| |
| aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE, |
| 2, ®16); |
| |
| if (dev->net->mtu > 12500) { |
| memcpy(buf, &AQC111_BULKIN_SIZE[2], 5); |
| /* RX bulk configuration */ |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_RX_BULKIN_QCTRL, |
| 5, 5, buf); |
| } |
| |
| /* Set high low water level */ |
| if (dev->net->mtu <= 4500) |
| reg16 = 0x0810; |
| else if (dev->net->mtu <= 9500) |
| reg16 = 0x1020; |
| else if (dev->net->mtu <= 12500) |
| reg16 = 0x1420; |
| else |
| reg16 = 0x1A20; |
| |
| aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_PAUSE_WATERLVL_LOW, |
| 2, ®16); |
| |
| return 0; |
| } |
| |
| static int aqc111_set_mac_addr(struct net_device *net, void *p) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| int ret = 0; |
| |
| ret = eth_mac_addr(net, p); |
| if (ret < 0) |
| return ret; |
| |
| /* Set the MAC address */ |
| return aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_NODE_ID, ETH_ALEN, |
| ETH_ALEN, net->dev_addr); |
| } |
| |
| static int aqc111_vlan_rx_kill_vid(struct net_device *net, |
| __be16 proto, u16 vid) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| u8 vlan_ctrl = 0; |
| u16 reg16 = 0; |
| u8 reg8 = 0; |
| |
| aqc111_read_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_CONTROL, 1, 1, ®8); |
| vlan_ctrl = reg8; |
| |
| /* Address */ |
| reg8 = (vid / 16); |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_ADDRESS, 1, 1, ®8); |
| /* Data */ |
| reg8 = vlan_ctrl | SFR_VLAN_CONTROL_RD; |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_CONTROL, 1, 1, ®8); |
| aqc111_read16_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_DATA0, 2, ®16); |
| reg16 &= ~(1 << (vid % 16)); |
| aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_DATA0, 2, ®16); |
| reg8 = vlan_ctrl | SFR_VLAN_CONTROL_WE; |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_CONTROL, 1, 1, ®8); |
| |
| return 0; |
| } |
| |
| static int aqc111_vlan_rx_add_vid(struct net_device *net, __be16 proto, u16 vid) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| u8 vlan_ctrl = 0; |
| u16 reg16 = 0; |
| u8 reg8 = 0; |
| |
| aqc111_read_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_CONTROL, 1, 1, ®8); |
| vlan_ctrl = reg8; |
| |
| /* Address */ |
| reg8 = (vid / 16); |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_ADDRESS, 1, 1, ®8); |
| /* Data */ |
| reg8 = vlan_ctrl | SFR_VLAN_CONTROL_RD; |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_CONTROL, 1, 1, ®8); |
| aqc111_read16_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_DATA0, 2, ®16); |
| reg16 |= (1 << (vid % 16)); |
| aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_DATA0, 2, ®16); |
| reg8 = vlan_ctrl | SFR_VLAN_CONTROL_WE; |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_CONTROL, 1, 1, ®8); |
| |
| return 0; |
| } |
| |
| static void aqc111_set_rx_mode(struct net_device *net) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| struct aqc111_data *aqc111_data = dev->driver_priv; |
| int mc_count = 0; |
| |
| mc_count = netdev_mc_count(net); |
| |
| aqc111_data->rxctl &= ~(SFR_RX_CTL_PRO | SFR_RX_CTL_AMALL | |
| SFR_RX_CTL_AM); |
| |
| if (net->flags & IFF_PROMISC) { |
| aqc111_data->rxctl |= SFR_RX_CTL_PRO; |
| } else if ((net->flags & IFF_ALLMULTI) || mc_count > AQ_MAX_MCAST) { |
| aqc111_data->rxctl |= SFR_RX_CTL_AMALL; |
| } else if (!netdev_mc_empty(net)) { |
| u8 m_filter[AQ_MCAST_FILTER_SIZE] = { 0 }; |
| struct netdev_hw_addr *ha = NULL; |
| u32 crc_bits = 0; |
| |
| netdev_for_each_mc_addr(ha, net) { |
| crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26; |
| m_filter[crc_bits >> 3] |= BIT(crc_bits & 7); |
| } |
| |
| aqc111_write_cmd_async(dev, AQ_ACCESS_MAC, |
| SFR_MULTI_FILTER_ARRY, |
| AQ_MCAST_FILTER_SIZE, |
| AQ_MCAST_FILTER_SIZE, m_filter); |
| |
| aqc111_data->rxctl |= SFR_RX_CTL_AM; |
| } |
| |
| aqc111_write16_cmd_async(dev, AQ_ACCESS_MAC, SFR_RX_CTL, |
| 2, &aqc111_data->rxctl); |
| } |
| |
| static int aqc111_set_features(struct net_device *net, |
| netdev_features_t features) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| struct aqc111_data *aqc111_data = dev->driver_priv; |
| netdev_features_t changed = net->features ^ features; |
| u16 reg16 = 0; |
| u8 reg8 = 0; |
| |
| if (changed & NETIF_F_IP_CSUM) { |
| aqc111_read_cmd(dev, AQ_ACCESS_MAC, SFR_TXCOE_CTL, 1, 1, ®8); |
| reg8 ^= SFR_TXCOE_TCP | SFR_TXCOE_UDP; |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_TXCOE_CTL, |
| 1, 1, ®8); |
| } |
| |
| if (changed & NETIF_F_IPV6_CSUM) { |
| aqc111_read_cmd(dev, AQ_ACCESS_MAC, SFR_TXCOE_CTL, 1, 1, ®8); |
| reg8 ^= SFR_TXCOE_TCPV6 | SFR_TXCOE_UDPV6; |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_TXCOE_CTL, |
| 1, 1, ®8); |
| } |
| |
| if (changed & NETIF_F_RXCSUM) { |
| aqc111_read_cmd(dev, AQ_ACCESS_MAC, SFR_RXCOE_CTL, 1, 1, ®8); |
| if (features & NETIF_F_RXCSUM) { |
| aqc111_data->rx_checksum = 1; |
| reg8 &= ~(SFR_RXCOE_IP | SFR_RXCOE_TCP | SFR_RXCOE_UDP | |
| SFR_RXCOE_TCPV6 | SFR_RXCOE_UDPV6); |
| } else { |
| aqc111_data->rx_checksum = 0; |
| reg8 |= SFR_RXCOE_IP | SFR_RXCOE_TCP | SFR_RXCOE_UDP | |
| SFR_RXCOE_TCPV6 | SFR_RXCOE_UDPV6; |
| } |
| |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_RXCOE_CTL, |
| 1, 1, ®8); |
| } |
| if (changed & NETIF_F_HW_VLAN_CTAG_FILTER) { |
| if (features & NETIF_F_HW_VLAN_CTAG_FILTER) { |
| u16 i = 0; |
| |
| for (i = 0; i < 256; i++) { |
| /* Address */ |
| reg8 = i; |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, |
| SFR_VLAN_ID_ADDRESS, |
| 1, 1, ®8); |
| /* Data */ |
| aqc111_write16_cmd(dev, AQ_ACCESS_MAC, |
| SFR_VLAN_ID_DATA0, |
| 2, ®16); |
| reg8 = SFR_VLAN_CONTROL_WE; |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, |
| SFR_VLAN_ID_CONTROL, |
| 1, 1, ®8); |
| } |
| aqc111_read_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_CONTROL, |
| 1, 1, ®8); |
| reg8 |= SFR_VLAN_CONTROL_VFE; |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, |
| SFR_VLAN_ID_CONTROL, 1, 1, ®8); |
| } else { |
| aqc111_read_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_CONTROL, |
| 1, 1, ®8); |
| reg8 &= ~SFR_VLAN_CONTROL_VFE; |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, |
| SFR_VLAN_ID_CONTROL, 1, 1, ®8); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static const struct net_device_ops aqc111_netdev_ops = { |
| .ndo_open = usbnet_open, |
| .ndo_stop = usbnet_stop, |
| .ndo_start_xmit = usbnet_start_xmit, |
| .ndo_tx_timeout = usbnet_tx_timeout, |
| .ndo_get_stats64 = usbnet_get_stats64, |
| .ndo_change_mtu = aqc111_change_mtu, |
| .ndo_set_mac_address = aqc111_set_mac_addr, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_vlan_rx_add_vid = aqc111_vlan_rx_add_vid, |
| .ndo_vlan_rx_kill_vid = aqc111_vlan_rx_kill_vid, |
| .ndo_set_rx_mode = aqc111_set_rx_mode, |
| .ndo_set_features = aqc111_set_features, |
| }; |
| |
| static int aqc111_read_perm_mac(struct usbnet *dev) |
| { |
| u8 buf[ETH_ALEN]; |
| int ret; |
| |
| ret = aqc111_read_cmd(dev, AQ_FLASH_PARAMETERS, 0, 0, ETH_ALEN, buf); |
| if (ret < 0) |
| goto out; |
| |
| ether_addr_copy(dev->net->perm_addr, buf); |
| |
| return 0; |
| out: |
| return ret; |
| } |
| |
| static void aqc111_read_fw_version(struct usbnet *dev, |
| struct aqc111_data *aqc111_data) |
| { |
| aqc111_read_cmd(dev, AQ_ACCESS_MAC, AQ_FW_VER_MAJOR, |
| 1, 1, &aqc111_data->fw_ver.major); |
| aqc111_read_cmd(dev, AQ_ACCESS_MAC, AQ_FW_VER_MINOR, |
| 1, 1, &aqc111_data->fw_ver.minor); |
| aqc111_read_cmd(dev, AQ_ACCESS_MAC, AQ_FW_VER_REV, |
| 1, 1, &aqc111_data->fw_ver.rev); |
| |
| if (aqc111_data->fw_ver.major & 0x80) |
| aqc111_data->fw_ver.major &= ~0x80; |
| } |
| |
| static int aqc111_bind(struct usbnet *dev, struct usb_interface *intf) |
| { |
| struct usb_device *udev = interface_to_usbdev(intf); |
| enum usb_device_speed usb_speed = udev->speed; |
| struct aqc111_data *aqc111_data; |
| int ret; |
| |
| /* Check if vendor configuration */ |
| if (udev->actconfig->desc.bConfigurationValue != 1) { |
| usb_driver_set_configuration(udev, 1); |
| return -ENODEV; |
| } |
| |
| usb_reset_configuration(dev->udev); |
| |
| ret = usbnet_get_endpoints(dev, intf); |
| if (ret < 0) { |
| netdev_dbg(dev->net, "usbnet_get_endpoints failed"); |
| return ret; |
| } |
| |
| aqc111_data = kzalloc(sizeof(*aqc111_data), GFP_KERNEL); |
| if (!aqc111_data) |
| return -ENOMEM; |
| |
| /* store aqc111_data pointer in device data field */ |
| dev->driver_priv = aqc111_data; |
| |
| /* Init the MAC address */ |
| ret = aqc111_read_perm_mac(dev); |
| if (ret) |
| goto out; |
| |
| ether_addr_copy(dev->net->dev_addr, dev->net->perm_addr); |
| |
| /* Set Rx urb size */ |
| dev->rx_urb_size = URB_SIZE; |
| |
| /* Set TX needed headroom & tailroom */ |
| dev->net->needed_headroom += sizeof(u64); |
| dev->net->needed_tailroom += sizeof(u64); |
| |
| dev->net->max_mtu = 16334; |
| |
| dev->net->netdev_ops = &aqc111_netdev_ops; |
| dev->net->ethtool_ops = &aqc111_ethtool_ops; |
| |
| if (usb_device_no_sg_constraint(dev->udev)) |
| dev->can_dma_sg = 1; |
| |
| dev->net->hw_features |= AQ_SUPPORT_HW_FEATURE; |
| dev->net->features |= AQ_SUPPORT_FEATURE; |
| dev->net->vlan_features |= AQ_SUPPORT_VLAN_FEATURE; |
| |
| netif_set_gso_max_size(dev->net, 65535); |
| |
| aqc111_read_fw_version(dev, aqc111_data); |
| aqc111_data->autoneg = AUTONEG_ENABLE; |
| aqc111_data->advertised_speed = (usb_speed == USB_SPEED_SUPER) ? |
| SPEED_5000 : SPEED_1000; |
| |
| return 0; |
| |
| out: |
| kfree(aqc111_data); |
| return ret; |
| } |
| |
| static void aqc111_unbind(struct usbnet *dev, struct usb_interface *intf) |
| { |
| struct aqc111_data *aqc111_data = dev->driver_priv; |
| u16 reg16; |
| |
| /* Force bz */ |
| reg16 = SFR_PHYPWR_RSTCTL_BZ; |
| aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_PHYPWR_RSTCTL, |
| 2, ®16); |
| reg16 = 0; |
| aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_PHYPWR_RSTCTL, |
| 2, ®16); |
| |
| /* Power down ethernet PHY */ |
| aqc111_data->phy_cfg &= ~AQ_ADV_MASK; |
| aqc111_data->phy_cfg |= AQ_LOW_POWER; |
| aqc111_data->phy_cfg &= ~AQ_PHY_POWER_EN; |
| aqc111_write32_cmd_nopm(dev, AQ_PHY_OPS, 0, 0, |
| &aqc111_data->phy_cfg); |
| |
| kfree(aqc111_data); |
| } |
| |
| static void aqc111_status(struct usbnet *dev, struct urb *urb) |
| { |
| struct aqc111_data *aqc111_data = dev->driver_priv; |
| u64 *event_data = NULL; |
| int link = 0; |
| |
| if (urb->actual_length < sizeof(*event_data)) |
| return; |
| |
| event_data = urb->transfer_buffer; |
| le64_to_cpus(event_data); |
| |
| if (*event_data & AQ_LS_MASK) |
| link = 1; |
| else |
| link = 0; |
| |
| aqc111_data->link_speed = (*event_data & AQ_SPEED_MASK) >> |
| AQ_SPEED_SHIFT; |
| aqc111_data->link = link; |
| |
| if (netif_carrier_ok(dev->net) != link) |
| usbnet_defer_kevent(dev, EVENT_LINK_RESET); |
| } |
| |
| static void aqc111_configure_rx(struct usbnet *dev, |
| struct aqc111_data *aqc111_data) |
| { |
| enum usb_device_speed usb_speed = dev->udev->speed; |
| u16 link_speed = 0, usb_host = 0; |
| u8 buf[5] = { 0 }; |
| u8 queue_num = 0; |
| u16 reg16 = 0; |
| u8 reg8 = 0; |
| |
| buf[0] = 0x00; |
| buf[1] = 0xF8; |
| buf[2] = 0x07; |
| switch (aqc111_data->link_speed) { |
| case AQ_INT_SPEED_5G: |
| link_speed = 5000; |
| reg8 = 0x05; |
| reg16 = 0x001F; |
| break; |
| case AQ_INT_SPEED_2_5G: |
| link_speed = 2500; |
| reg16 = 0x003F; |
| break; |
| case AQ_INT_SPEED_1G: |
| link_speed = 1000; |
| reg16 = 0x009F; |
| break; |
| case AQ_INT_SPEED_100M: |
| link_speed = 100; |
| queue_num = 1; |
| reg16 = 0x063F; |
| buf[1] = 0xFB; |
| buf[2] = 0x4; |
| break; |
| } |
| |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_INTER_PACKET_GAP_0, |
| 1, 1, ®8); |
| |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_TX_PAUSE_RESEND_T, 3, 3, buf); |
| |
| switch (usb_speed) { |
| case USB_SPEED_SUPER: |
| usb_host = 3; |
| break; |
| case USB_SPEED_HIGH: |
| usb_host = 2; |
| break; |
| case USB_SPEED_FULL: |
| case USB_SPEED_LOW: |
| usb_host = 1; |
| queue_num = 0; |
| break; |
| default: |
| usb_host = 0; |
| break; |
| } |
| |
| if (dev->net->mtu > 12500 && dev->net->mtu <= 16334) |
| queue_num = 2; /* For Jumbo packet 16KB */ |
| |
| memcpy(buf, &AQC111_BULKIN_SIZE[queue_num], 5); |
| /* RX bulk configuration */ |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_RX_BULKIN_QCTRL, 5, 5, buf); |
| |
| /* Set high low water level */ |
| if (dev->net->mtu <= 4500) |
| reg16 = 0x0810; |
| else if (dev->net->mtu <= 9500) |
| reg16 = 0x1020; |
| else if (dev->net->mtu <= 12500) |
| reg16 = 0x1420; |
| else if (dev->net->mtu <= 16334) |
| reg16 = 0x1A20; |
| |
| aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_PAUSE_WATERLVL_LOW, |
| 2, ®16); |
| netdev_info(dev->net, "Link Speed %d, USB %d", link_speed, usb_host); |
| } |
| |
| static void aqc111_configure_csum_offload(struct usbnet *dev) |
| { |
| u8 reg8 = 0; |
| |
| if (dev->net->features & NETIF_F_RXCSUM) { |
| reg8 |= SFR_RXCOE_IP | SFR_RXCOE_TCP | SFR_RXCOE_UDP | |
| SFR_RXCOE_TCPV6 | SFR_RXCOE_UDPV6; |
| } |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_RXCOE_CTL, 1, 1, ®8); |
| |
| reg8 = 0; |
| if (dev->net->features & NETIF_F_IP_CSUM) |
| reg8 |= SFR_TXCOE_IP | SFR_TXCOE_TCP | SFR_TXCOE_UDP; |
| |
| if (dev->net->features & NETIF_F_IPV6_CSUM) |
| reg8 |= SFR_TXCOE_TCPV6 | SFR_TXCOE_UDPV6; |
| |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_TXCOE_CTL, 1, 1, ®8); |
| } |
| |
| static int aqc111_link_reset(struct usbnet *dev) |
| { |
| struct aqc111_data *aqc111_data = dev->driver_priv; |
| u16 reg16 = 0; |
| u8 reg8 = 0; |
| |
| if (aqc111_data->link == 1) { /* Link up */ |
| aqc111_configure_rx(dev, aqc111_data); |
| |
| /* Vlan Tag Filter */ |
| reg8 = SFR_VLAN_CONTROL_VSO; |
| if (dev->net->features & NETIF_F_HW_VLAN_CTAG_FILTER) |
| reg8 |= SFR_VLAN_CONTROL_VFE; |
| |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_CONTROL, |
| 1, 1, ®8); |
| |
| reg8 = 0x0; |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_BMRX_DMA_CONTROL, |
| 1, 1, ®8); |
| |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_BMTX_DMA_CONTROL, |
| 1, 1, ®8); |
| |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_ARC_CTRL, 1, 1, ®8); |
| |
| reg16 = SFR_RX_CTL_IPE | SFR_RX_CTL_AB; |
| aqc111_data->rxctl = reg16; |
| aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_RX_CTL, 2, ®16); |
| |
| reg8 = SFR_RX_PATH_READY; |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_ETH_MAC_PATH, |
| 1, 1, ®8); |
| |
| reg8 = SFR_BULK_OUT_EFF_EN; |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_BULK_OUT_CTRL, |
| 1, 1, ®8); |
| |
| reg16 = 0; |
| aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE, |
| 2, ®16); |
| |
| reg16 = SFR_MEDIUM_XGMIIMODE | SFR_MEDIUM_FULL_DUPLEX; |
| aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE, |
| 2, ®16); |
| |
| aqc111_configure_csum_offload(dev); |
| |
| aqc111_set_rx_mode(dev->net); |
| |
| aqc111_read16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE, |
| 2, ®16); |
| |
| if (dev->net->mtu > 1500) |
| reg16 |= SFR_MEDIUM_JUMBO_EN; |
| |
| reg16 |= SFR_MEDIUM_RECEIVE_EN | SFR_MEDIUM_RXFLOW_CTRLEN | |
| SFR_MEDIUM_TXFLOW_CTRLEN; |
| aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE, |
| 2, ®16); |
| |
| aqc111_data->rxctl |= SFR_RX_CTL_START; |
| aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_RX_CTL, |
| 2, &aqc111_data->rxctl); |
| |
| netif_carrier_on(dev->net); |
| } else { |
| aqc111_read16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE, |
| 2, ®16); |
| reg16 &= ~SFR_MEDIUM_RECEIVE_EN; |
| aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE, |
| 2, ®16); |
| |
| aqc111_data->rxctl &= ~SFR_RX_CTL_START; |
| aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_RX_CTL, |
| 2, &aqc111_data->rxctl); |
| |
| reg8 = SFR_BULK_OUT_FLUSH_EN | SFR_BULK_OUT_EFF_EN; |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_BULK_OUT_CTRL, |
| 1, 1, ®8); |
| reg8 = SFR_BULK_OUT_EFF_EN; |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_BULK_OUT_CTRL, |
| 1, 1, ®8); |
| |
| netif_carrier_off(dev->net); |
| } |
| return 0; |
| } |
| |
| static int aqc111_reset(struct usbnet *dev) |
| { |
| struct aqc111_data *aqc111_data = dev->driver_priv; |
| u8 reg8 = 0; |
| |
| dev->rx_urb_size = URB_SIZE; |
| |
| if (usb_device_no_sg_constraint(dev->udev)) |
| dev->can_dma_sg = 1; |
| |
| dev->net->hw_features |= AQ_SUPPORT_HW_FEATURE; |
| dev->net->features |= AQ_SUPPORT_FEATURE; |
| dev->net->vlan_features |= AQ_SUPPORT_VLAN_FEATURE; |
| |
| /* Power up ethernet PHY */ |
| aqc111_data->phy_cfg = AQ_PHY_POWER_EN; |
| aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0, |
| &aqc111_data->phy_cfg); |
| |
| /* Set the MAC address */ |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_NODE_ID, ETH_ALEN, |
| ETH_ALEN, dev->net->dev_addr); |
| |
| reg8 = 0xFF; |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_BM_INT_MASK, 1, 1, ®8); |
| |
| reg8 = 0x0; |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_SWP_CTRL, 1, 1, ®8); |
| |
| aqc111_read_cmd(dev, AQ_ACCESS_MAC, SFR_MONITOR_MODE, 1, 1, ®8); |
| reg8 &= ~(SFR_MONITOR_MODE_EPHYRW | SFR_MONITOR_MODE_RWLC | |
| SFR_MONITOR_MODE_RWMP | SFR_MONITOR_MODE_RWWF | |
| SFR_MONITOR_MODE_RW_FLAG); |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_MONITOR_MODE, 1, 1, ®8); |
| |
| netif_carrier_off(dev->net); |
| |
| /* Phy advertise */ |
| aqc111_set_phy_speed(dev, aqc111_data->autoneg, |
| aqc111_data->advertised_speed); |
| |
| return 0; |
| } |
| |
| static int aqc111_stop(struct usbnet *dev) |
| { |
| struct aqc111_data *aqc111_data = dev->driver_priv; |
| u16 reg16 = 0; |
| |
| aqc111_read16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE, |
| 2, ®16); |
| reg16 &= ~SFR_MEDIUM_RECEIVE_EN; |
| aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE, |
| 2, ®16); |
| reg16 = 0; |
| aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_RX_CTL, 2, ®16); |
| |
| /* Put PHY to low power*/ |
| aqc111_data->phy_cfg |= AQ_LOW_POWER; |
| aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0, |
| &aqc111_data->phy_cfg); |
| |
| netif_carrier_off(dev->net); |
| |
| return 0; |
| } |
| |
| static void aqc111_rx_checksum(struct sk_buff *skb, u64 pkt_desc) |
| { |
| u32 pkt_type = 0; |
| |
| skb->ip_summed = CHECKSUM_NONE; |
| /* checksum error bit is set */ |
| if (pkt_desc & AQ_RX_PD_L4_ERR || pkt_desc & AQ_RX_PD_L3_ERR) |
| return; |
| |
| pkt_type = pkt_desc & AQ_RX_PD_L4_TYPE_MASK; |
| /* It must be a TCP or UDP packet with a valid checksum */ |
| if (pkt_type == AQ_RX_PD_L4_TCP || pkt_type == AQ_RX_PD_L4_UDP) |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| } |
| |
| static int aqc111_rx_fixup(struct usbnet *dev, struct sk_buff *skb) |
| { |
| struct aqc111_data *aqc111_data = dev->driver_priv; |
| struct sk_buff *new_skb = NULL; |
| u32 pkt_total_offset = 0; |
| u64 *pkt_desc_ptr = NULL; |
| u32 start_of_descs = 0; |
| u32 desc_offset = 0; /*RX Header Offset*/ |
| u16 pkt_count = 0; |
| u64 desc_hdr = 0; |
| u16 vlan_tag = 0; |
| u32 skb_len = 0; |
| |
| if (!skb) |
| goto err; |
| |
| if (skb->len == 0) |
| goto err; |
| |
| skb_len = skb->len; |
| /* RX Descriptor Header */ |
| skb_trim(skb, skb->len - sizeof(desc_hdr)); |
| desc_hdr = le64_to_cpup((u64 *)skb_tail_pointer(skb)); |
| |
| /* Check these packets */ |
| desc_offset = (desc_hdr & AQ_RX_DH_DESC_OFFSET_MASK) >> |
| AQ_RX_DH_DESC_OFFSET_SHIFT; |
| pkt_count = desc_hdr & AQ_RX_DH_PKT_CNT_MASK; |
| start_of_descs = skb_len - ((pkt_count + 1) * sizeof(desc_hdr)); |
| |
| /* self check descs position */ |
| if (start_of_descs != desc_offset) |
| goto err; |
| |
| /* self check desc_offset from header*/ |
| if (desc_offset >= skb_len) |
| goto err; |
| |
| if (pkt_count == 0) |
| goto err; |
| |
| /* Get the first RX packet descriptor */ |
| pkt_desc_ptr = (u64 *)(skb->data + desc_offset); |
| |
| while (pkt_count--) { |
| u64 pkt_desc = le64_to_cpup(pkt_desc_ptr); |
| u32 pkt_len_with_padd = 0; |
| u32 pkt_len = 0; |
| |
| pkt_len = (u32)((pkt_desc & AQ_RX_PD_LEN_MASK) >> |
| AQ_RX_PD_LEN_SHIFT); |
| pkt_len_with_padd = ((pkt_len + 7) & 0x7FFF8); |
| |
| pkt_total_offset += pkt_len_with_padd; |
| if (pkt_total_offset > desc_offset || |
| (pkt_count == 0 && pkt_total_offset != desc_offset)) { |
| goto err; |
| } |
| |
| if (pkt_desc & AQ_RX_PD_DROP || |
| !(pkt_desc & AQ_RX_PD_RX_OK) || |
| pkt_len > (dev->hard_mtu + AQ_RX_HW_PAD)) { |
| skb_pull(skb, pkt_len_with_padd); |
| /* Next RX Packet Descriptor */ |
| pkt_desc_ptr++; |
| continue; |
| } |
| |
| /* Clone SKB */ |
| new_skb = skb_clone(skb, GFP_ATOMIC); |
| |
| if (!new_skb) |
| goto err; |
| |
| new_skb->len = pkt_len; |
| skb_pull(new_skb, AQ_RX_HW_PAD); |
| skb_set_tail_pointer(new_skb, new_skb->len); |
| |
| new_skb->truesize = SKB_TRUESIZE(new_skb->len); |
| if (aqc111_data->rx_checksum) |
| aqc111_rx_checksum(new_skb, pkt_desc); |
| |
| if (pkt_desc & AQ_RX_PD_VLAN) { |
| vlan_tag = pkt_desc >> AQ_RX_PD_VLAN_SHIFT; |
| __vlan_hwaccel_put_tag(new_skb, htons(ETH_P_8021Q), |
| vlan_tag & VLAN_VID_MASK); |
| } |
| |
| usbnet_skb_return(dev, new_skb); |
| if (pkt_count == 0) |
| break; |
| |
| skb_pull(skb, pkt_len_with_padd); |
| |
| /* Next RX Packet Header */ |
| pkt_desc_ptr++; |
| |
| new_skb = NULL; |
| } |
| |
| return 1; |
| |
| err: |
| return 0; |
| } |
| |
| static struct sk_buff *aqc111_tx_fixup(struct usbnet *dev, struct sk_buff *skb, |
| gfp_t flags) |
| { |
| int frame_size = dev->maxpacket; |
| struct sk_buff *new_skb = NULL; |
| u64 *tx_desc_ptr = NULL; |
| int padding_size = 0; |
| int headroom = 0; |
| int tailroom = 0; |
| u64 tx_desc = 0; |
| u16 tci = 0; |
| |
| /*Length of actual data*/ |
| tx_desc |= skb->len & AQ_TX_DESC_LEN_MASK; |
| |
| /* TSO MSS */ |
| tx_desc |= ((u64)(skb_shinfo(skb)->gso_size & AQ_TX_DESC_MSS_MASK)) << |
| AQ_TX_DESC_MSS_SHIFT; |
| |
| headroom = (skb->len + sizeof(tx_desc)) % 8; |
| if (headroom != 0) |
| padding_size = 8 - headroom; |
| |
| if (((skb->len + sizeof(tx_desc) + padding_size) % frame_size) == 0) { |
| padding_size += 8; |
| tx_desc |= AQ_TX_DESC_DROP_PADD; |
| } |
| |
| /* Vlan Tag */ |
| if (vlan_get_tag(skb, &tci) >= 0) { |
| tx_desc |= AQ_TX_DESC_VLAN; |
| tx_desc |= ((u64)tci & AQ_TX_DESC_VLAN_MASK) << |
| AQ_TX_DESC_VLAN_SHIFT; |
| } |
| |
| if (!dev->can_dma_sg && (dev->net->features & NETIF_F_SG) && |
| skb_linearize(skb)) |
| return NULL; |
| |
| headroom = skb_headroom(skb); |
| tailroom = skb_tailroom(skb); |
| |
| if (!(headroom >= sizeof(tx_desc) && tailroom >= padding_size)) { |
| new_skb = skb_copy_expand(skb, sizeof(tx_desc), |
| padding_size, flags); |
| dev_kfree_skb_any(skb); |
| skb = new_skb; |
| if (!skb) |
| return NULL; |
| } |
| if (padding_size != 0) |
| skb_put_zero(skb, padding_size); |
| /* Copy TX header */ |
| tx_desc_ptr = skb_push(skb, sizeof(tx_desc)); |
| *tx_desc_ptr = cpu_to_le64(tx_desc); |
| |
| usbnet_set_skb_tx_stats(skb, 1, 0); |
| |
| return skb; |
| } |
| |
| static const struct driver_info aqc111_info = { |
| .description = "Aquantia AQtion USB to 5GbE Controller", |
| .bind = aqc111_bind, |
| .unbind = aqc111_unbind, |
| .status = aqc111_status, |
| .link_reset = aqc111_link_reset, |
| .reset = aqc111_reset, |
| .stop = aqc111_stop, |
| .flags = FLAG_ETHER | FLAG_FRAMING_AX | |
| FLAG_AVOID_UNLINK_URBS | FLAG_MULTI_PACKET, |
| .rx_fixup = aqc111_rx_fixup, |
| .tx_fixup = aqc111_tx_fixup, |
| }; |
| |
| #define ASIX111_DESC \ |
| "ASIX USB 3.1 Gen1 to 5G Multi-Gigabit Ethernet Adapter" |
| |
| static const struct driver_info asix111_info = { |
| .description = ASIX111_DESC, |
| .bind = aqc111_bind, |
| .unbind = aqc111_unbind, |
| .status = aqc111_status, |
| .link_reset = aqc111_link_reset, |
| .reset = aqc111_reset, |
| .stop = aqc111_stop, |
| .flags = FLAG_ETHER | FLAG_FRAMING_AX | |
| FLAG_AVOID_UNLINK_URBS | FLAG_MULTI_PACKET, |
| .rx_fixup = aqc111_rx_fixup, |
| .tx_fixup = aqc111_tx_fixup, |
| }; |
| |
| #undef ASIX111_DESC |
| |
| #define ASIX112_DESC \ |
| "ASIX USB 3.1 Gen1 to 2.5G Multi-Gigabit Ethernet Adapter" |
| |
| static const struct driver_info asix112_info = { |
| .description = ASIX112_DESC, |
| .bind = aqc111_bind, |
| .unbind = aqc111_unbind, |
| .status = aqc111_status, |
| .link_reset = aqc111_link_reset, |
| .reset = aqc111_reset, |
| .stop = aqc111_stop, |
| .flags = FLAG_ETHER | FLAG_FRAMING_AX | |
| FLAG_AVOID_UNLINK_URBS | FLAG_MULTI_PACKET, |
| .rx_fixup = aqc111_rx_fixup, |
| .tx_fixup = aqc111_tx_fixup, |
| }; |
| |
| #undef ASIX112_DESC |
| |
| static const struct driver_info trendnet_info = { |
| .description = "USB-C 3.1 to 5GBASE-T Ethernet Adapter", |
| .bind = aqc111_bind, |
| .unbind = aqc111_unbind, |
| .status = aqc111_status, |
| .link_reset = aqc111_link_reset, |
| .reset = aqc111_reset, |
| .stop = aqc111_stop, |
| .flags = FLAG_ETHER | FLAG_FRAMING_AX | |
| FLAG_AVOID_UNLINK_URBS | FLAG_MULTI_PACKET, |
| .rx_fixup = aqc111_rx_fixup, |
| .tx_fixup = aqc111_tx_fixup, |
| }; |
| |
| static const struct driver_info qnap_info = { |
| .description = "QNAP QNA-UC5G1T USB to 5GbE Adapter", |
| .bind = aqc111_bind, |
| .unbind = aqc111_unbind, |
| .status = aqc111_status, |
| .link_reset = aqc111_link_reset, |
| .reset = aqc111_reset, |
| .stop = aqc111_stop, |
| .flags = FLAG_ETHER | FLAG_FRAMING_AX | |
| FLAG_AVOID_UNLINK_URBS | FLAG_MULTI_PACKET, |
| .rx_fixup = aqc111_rx_fixup, |
| .tx_fixup = aqc111_tx_fixup, |
| }; |
| |
| static int aqc111_suspend(struct usb_interface *intf, pm_message_t message) |
| { |
| struct usbnet *dev = usb_get_intfdata(intf); |
| struct aqc111_data *aqc111_data = dev->driver_priv; |
| u16 temp_rx_ctrl = 0x00; |
| u16 reg16; |
| u8 reg8; |
| |
| usbnet_suspend(intf, message); |
| |
| aqc111_read16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_RX_CTL, 2, ®16); |
| temp_rx_ctrl = reg16; |
| /* Stop RX operations*/ |
| reg16 &= ~SFR_RX_CTL_START; |
| aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_RX_CTL, 2, ®16); |
| /* Force bz */ |
| aqc111_read16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_PHYPWR_RSTCTL, |
| 2, ®16); |
| reg16 |= SFR_PHYPWR_RSTCTL_BZ; |
| aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_PHYPWR_RSTCTL, |
| 2, ®16); |
| |
| reg8 = SFR_BULK_OUT_EFF_EN; |
| aqc111_write_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_BULK_OUT_CTRL, |
| 1, 1, ®8); |
| |
| temp_rx_ctrl &= ~(SFR_RX_CTL_START | SFR_RX_CTL_RF_WAK | |
| SFR_RX_CTL_AP | SFR_RX_CTL_AM); |
| aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_RX_CTL, |
| 2, &temp_rx_ctrl); |
| |
| reg8 = 0x00; |
| aqc111_write_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_ETH_MAC_PATH, |
| 1, 1, ®8); |
| |
| if (aqc111_data->wol_flags) { |
| struct aqc111_wol_cfg wol_cfg; |
| |
| memset(&wol_cfg, 0, sizeof(struct aqc111_wol_cfg)); |
| |
| aqc111_data->phy_cfg |= AQ_WOL; |
| ether_addr_copy(wol_cfg.hw_addr, dev->net->dev_addr); |
| wol_cfg.flags = aqc111_data->wol_flags; |
| |
| temp_rx_ctrl |= (SFR_RX_CTL_AB | SFR_RX_CTL_START); |
| aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_RX_CTL, |
| 2, &temp_rx_ctrl); |
| reg8 = 0x00; |
| aqc111_write_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_BM_INT_MASK, |
| 1, 1, ®8); |
| reg8 = SFR_BMRX_DMA_EN; |
| aqc111_write_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_BMRX_DMA_CONTROL, |
| 1, 1, ®8); |
| reg8 = SFR_RX_PATH_READY; |
| aqc111_write_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_ETH_MAC_PATH, |
| 1, 1, ®8); |
| reg8 = 0x07; |
| aqc111_write_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_RX_BULKIN_QCTRL, |
| 1, 1, ®8); |
| reg8 = 0x00; |
| aqc111_write_cmd_nopm(dev, AQ_ACCESS_MAC, |
| SFR_RX_BULKIN_QTIMR_LOW, 1, 1, ®8); |
| aqc111_write_cmd_nopm(dev, AQ_ACCESS_MAC, |
| SFR_RX_BULKIN_QTIMR_HIGH, 1, 1, ®8); |
| reg8 = 0xFF; |
| aqc111_write_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_RX_BULKIN_QSIZE, |
| 1, 1, ®8); |
| aqc111_write_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_RX_BULKIN_QIFG, |
| 1, 1, ®8); |
| |
| aqc111_read16_cmd_nopm(dev, AQ_ACCESS_MAC, |
| SFR_MEDIUM_STATUS_MODE, 2, ®16); |
| reg16 |= SFR_MEDIUM_RECEIVE_EN; |
| aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC, |
| SFR_MEDIUM_STATUS_MODE, 2, ®16); |
| |
| aqc111_write_cmd(dev, AQ_WOL_CFG, 0, 0, |
| WOL_CFG_SIZE, &wol_cfg); |
| aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0, |
| &aqc111_data->phy_cfg); |
| } else { |
| aqc111_data->phy_cfg |= AQ_LOW_POWER; |
| aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0, |
| &aqc111_data->phy_cfg); |
| |
| /* Disable RX path */ |
| aqc111_read16_cmd_nopm(dev, AQ_ACCESS_MAC, |
| SFR_MEDIUM_STATUS_MODE, 2, ®16); |
| reg16 &= ~SFR_MEDIUM_RECEIVE_EN; |
| aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC, |
| SFR_MEDIUM_STATUS_MODE, 2, ®16); |
| } |
| |
| return 0; |
| } |
| |
| static int aqc111_resume(struct usb_interface *intf) |
| { |
| struct usbnet *dev = usb_get_intfdata(intf); |
| struct aqc111_data *aqc111_data = dev->driver_priv; |
| u16 reg16; |
| u8 reg8; |
| |
| netif_carrier_off(dev->net); |
| |
| /* Power up ethernet PHY */ |
| aqc111_data->phy_cfg |= AQ_PHY_POWER_EN; |
| aqc111_data->phy_cfg &= ~AQ_LOW_POWER; |
| aqc111_data->phy_cfg &= ~AQ_WOL; |
| |
| reg8 = 0xFF; |
| aqc111_write_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_BM_INT_MASK, |
| 1, 1, ®8); |
| /* Configure RX control register => start operation */ |
| reg16 = aqc111_data->rxctl; |
| reg16 &= ~SFR_RX_CTL_START; |
| aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_RX_CTL, 2, ®16); |
| |
| reg16 |= SFR_RX_CTL_START; |
| aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_RX_CTL, 2, ®16); |
| |
| aqc111_set_phy_speed(dev, aqc111_data->autoneg, |
| aqc111_data->advertised_speed); |
| |
| aqc111_read16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE, |
| 2, ®16); |
| reg16 |= SFR_MEDIUM_RECEIVE_EN; |
| aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE, |
| 2, ®16); |
| reg8 = SFR_RX_PATH_READY; |
| aqc111_write_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_ETH_MAC_PATH, |
| 1, 1, ®8); |
| reg8 = 0x0; |
| aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_BMRX_DMA_CONTROL, 1, 1, ®8); |
| |
| return usbnet_resume(intf); |
| } |
| |
| #define AQC111_USB_ETH_DEV(vid, pid, table) \ |
| USB_DEVICE_INTERFACE_CLASS((vid), (pid), USB_CLASS_VENDOR_SPEC), \ |
| .driver_info = (unsigned long)&(table) \ |
| }, \ |
| { \ |
| USB_DEVICE_AND_INTERFACE_INFO((vid), (pid), \ |
| USB_CLASS_COMM, \ |
| USB_CDC_SUBCLASS_ETHERNET, \ |
| USB_CDC_PROTO_NONE), \ |
| .driver_info = (unsigned long)&(table), |
| |
| static const struct usb_device_id products[] = { |
| {AQC111_USB_ETH_DEV(0x2eca, 0xc101, aqc111_info)}, |
| {AQC111_USB_ETH_DEV(0x0b95, 0x2790, asix111_info)}, |
| {AQC111_USB_ETH_DEV(0x0b95, 0x2791, asix112_info)}, |
| {AQC111_USB_ETH_DEV(0x20f4, 0xe05a, trendnet_info)}, |
| {AQC111_USB_ETH_DEV(0x1c04, 0x0015, qnap_info)}, |
| { },/* END */ |
| }; |
| MODULE_DEVICE_TABLE(usb, products); |
| |
| static struct usb_driver aq_driver = { |
| .name = "aqc111", |
| .id_table = products, |
| .probe = usbnet_probe, |
| .suspend = aqc111_suspend, |
| .resume = aqc111_resume, |
| .disconnect = usbnet_disconnect, |
| }; |
| |
| module_usb_driver(aq_driver); |
| |
| MODULE_DESCRIPTION("Aquantia AQtion USB to 5/2.5GbE Controllers"); |
| MODULE_LICENSE("GPL"); |