| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Driver for the Intel P-Unit Mailbox IPC mechanism |
| * |
| * (C) Copyright 2015 Intel Corporation |
| * |
| * The heart of the P-Unit is the Foxton microcontroller and its firmware, |
| * which provide mailbox interface for power management usage. |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| |
| #include <asm/intel_punit_ipc.h> |
| |
| /* IPC Mailbox registers */ |
| #define OFFSET_DATA_LOW 0x0 |
| #define OFFSET_DATA_HIGH 0x4 |
| /* bit field of interface register */ |
| #define CMD_RUN BIT(31) |
| #define CMD_ERRCODE_MASK GENMASK(7, 0) |
| #define CMD_PARA1_SHIFT 8 |
| #define CMD_PARA2_SHIFT 16 |
| |
| #define CMD_TIMEOUT_SECONDS 1 |
| |
| enum { |
| BASE_DATA = 0, |
| BASE_IFACE, |
| BASE_MAX, |
| }; |
| |
| typedef struct { |
| struct device *dev; |
| struct mutex lock; |
| int irq; |
| struct completion cmd_complete; |
| /* base of interface and data registers */ |
| void __iomem *base[RESERVED_IPC][BASE_MAX]; |
| IPC_TYPE type; |
| } IPC_DEV; |
| |
| static IPC_DEV *punit_ipcdev; |
| |
| static inline u32 ipc_read_status(IPC_DEV *ipcdev, IPC_TYPE type) |
| { |
| return readl(ipcdev->base[type][BASE_IFACE]); |
| } |
| |
| static inline void ipc_write_cmd(IPC_DEV *ipcdev, IPC_TYPE type, u32 cmd) |
| { |
| writel(cmd, ipcdev->base[type][BASE_IFACE]); |
| } |
| |
| static inline u32 ipc_read_data_low(IPC_DEV *ipcdev, IPC_TYPE type) |
| { |
| return readl(ipcdev->base[type][BASE_DATA] + OFFSET_DATA_LOW); |
| } |
| |
| static inline u32 ipc_read_data_high(IPC_DEV *ipcdev, IPC_TYPE type) |
| { |
| return readl(ipcdev->base[type][BASE_DATA] + OFFSET_DATA_HIGH); |
| } |
| |
| static inline void ipc_write_data_low(IPC_DEV *ipcdev, IPC_TYPE type, u32 data) |
| { |
| writel(data, ipcdev->base[type][BASE_DATA] + OFFSET_DATA_LOW); |
| } |
| |
| static inline void ipc_write_data_high(IPC_DEV *ipcdev, IPC_TYPE type, u32 data) |
| { |
| writel(data, ipcdev->base[type][BASE_DATA] + OFFSET_DATA_HIGH); |
| } |
| |
| static const char *ipc_err_string(int error) |
| { |
| if (error == IPC_PUNIT_ERR_SUCCESS) |
| return "no error"; |
| else if (error == IPC_PUNIT_ERR_INVALID_CMD) |
| return "invalid command"; |
| else if (error == IPC_PUNIT_ERR_INVALID_PARAMETER) |
| return "invalid parameter"; |
| else if (error == IPC_PUNIT_ERR_CMD_TIMEOUT) |
| return "command timeout"; |
| else if (error == IPC_PUNIT_ERR_CMD_LOCKED) |
| return "command locked"; |
| else if (error == IPC_PUNIT_ERR_INVALID_VR_ID) |
| return "invalid vr id"; |
| else if (error == IPC_PUNIT_ERR_VR_ERR) |
| return "vr error"; |
| else |
| return "unknown error"; |
| } |
| |
| static int intel_punit_ipc_check_status(IPC_DEV *ipcdev, IPC_TYPE type) |
| { |
| int loops = CMD_TIMEOUT_SECONDS * USEC_PER_SEC; |
| int errcode; |
| int status; |
| |
| if (ipcdev->irq) { |
| if (!wait_for_completion_timeout(&ipcdev->cmd_complete, |
| CMD_TIMEOUT_SECONDS * HZ)) { |
| dev_err(ipcdev->dev, "IPC timed out\n"); |
| return -ETIMEDOUT; |
| } |
| } else { |
| while ((ipc_read_status(ipcdev, type) & CMD_RUN) && --loops) |
| udelay(1); |
| if (!loops) { |
| dev_err(ipcdev->dev, "IPC timed out\n"); |
| return -ETIMEDOUT; |
| } |
| } |
| |
| status = ipc_read_status(ipcdev, type); |
| errcode = status & CMD_ERRCODE_MASK; |
| if (errcode) { |
| dev_err(ipcdev->dev, "IPC failed: %s, IPC_STS=0x%x\n", |
| ipc_err_string(errcode), status); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * intel_punit_ipc_simple_command() - Simple IPC command |
| * @cmd: IPC command code. |
| * @para1: First 8bit parameter, set 0 if not used. |
| * @para2: Second 8bit parameter, set 0 if not used. |
| * |
| * Send a IPC command to P-Unit when there is no data transaction |
| * |
| * Return: IPC error code or 0 on success. |
| */ |
| int intel_punit_ipc_simple_command(int cmd, int para1, int para2) |
| { |
| IPC_DEV *ipcdev = punit_ipcdev; |
| IPC_TYPE type; |
| u32 val; |
| int ret; |
| |
| mutex_lock(&ipcdev->lock); |
| |
| reinit_completion(&ipcdev->cmd_complete); |
| type = (cmd & IPC_PUNIT_CMD_TYPE_MASK) >> IPC_TYPE_OFFSET; |
| |
| val = cmd & ~IPC_PUNIT_CMD_TYPE_MASK; |
| val |= CMD_RUN | para2 << CMD_PARA2_SHIFT | para1 << CMD_PARA1_SHIFT; |
| ipc_write_cmd(ipcdev, type, val); |
| ret = intel_punit_ipc_check_status(ipcdev, type); |
| |
| mutex_unlock(&ipcdev->lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(intel_punit_ipc_simple_command); |
| |
| /** |
| * intel_punit_ipc_command() - IPC command with data and pointers |
| * @cmd: IPC command code. |
| * @para1: First 8bit parameter, set 0 if not used. |
| * @para2: Second 8bit parameter, set 0 if not used. |
| * @in: Input data, 32bit for BIOS cmd, two 32bit for GTD and ISPD. |
| * @out: Output data. |
| * |
| * Send a IPC command to P-Unit with data transaction |
| * |
| * Return: IPC error code or 0 on success. |
| */ |
| int intel_punit_ipc_command(u32 cmd, u32 para1, u32 para2, u32 *in, u32 *out) |
| { |
| IPC_DEV *ipcdev = punit_ipcdev; |
| IPC_TYPE type; |
| u32 val; |
| int ret; |
| |
| mutex_lock(&ipcdev->lock); |
| |
| reinit_completion(&ipcdev->cmd_complete); |
| type = (cmd & IPC_PUNIT_CMD_TYPE_MASK) >> IPC_TYPE_OFFSET; |
| |
| if (in) { |
| ipc_write_data_low(ipcdev, type, *in); |
| if (type == GTDRIVER_IPC || type == ISPDRIVER_IPC) |
| ipc_write_data_high(ipcdev, type, *++in); |
| } |
| |
| val = cmd & ~IPC_PUNIT_CMD_TYPE_MASK; |
| val |= CMD_RUN | para2 << CMD_PARA2_SHIFT | para1 << CMD_PARA1_SHIFT; |
| ipc_write_cmd(ipcdev, type, val); |
| |
| ret = intel_punit_ipc_check_status(ipcdev, type); |
| if (ret) |
| goto out; |
| |
| if (out) { |
| *out = ipc_read_data_low(ipcdev, type); |
| if (type == GTDRIVER_IPC || type == ISPDRIVER_IPC) |
| *++out = ipc_read_data_high(ipcdev, type); |
| } |
| |
| out: |
| mutex_unlock(&ipcdev->lock); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(intel_punit_ipc_command); |
| |
| static irqreturn_t intel_punit_ioc(int irq, void *dev_id) |
| { |
| IPC_DEV *ipcdev = dev_id; |
| |
| complete(&ipcdev->cmd_complete); |
| return IRQ_HANDLED; |
| } |
| |
| static int intel_punit_get_bars(struct platform_device *pdev) |
| { |
| void __iomem *addr; |
| |
| /* |
| * The following resources are required |
| * - BIOS_IPC BASE_DATA |
| * - BIOS_IPC BASE_IFACE |
| */ |
| addr = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(addr)) |
| return PTR_ERR(addr); |
| punit_ipcdev->base[BIOS_IPC][BASE_DATA] = addr; |
| |
| addr = devm_platform_ioremap_resource(pdev, 1); |
| if (IS_ERR(addr)) |
| return PTR_ERR(addr); |
| punit_ipcdev->base[BIOS_IPC][BASE_IFACE] = addr; |
| |
| /* |
| * The following resources are optional |
| * - ISPDRIVER_IPC BASE_DATA |
| * - ISPDRIVER_IPC BASE_IFACE |
| * - GTDRIVER_IPC BASE_DATA |
| * - GTDRIVER_IPC BASE_IFACE |
| */ |
| addr = devm_platform_ioremap_resource(pdev, 2); |
| if (!IS_ERR(addr)) |
| punit_ipcdev->base[ISPDRIVER_IPC][BASE_DATA] = addr; |
| |
| addr = devm_platform_ioremap_resource(pdev, 3); |
| if (!IS_ERR(addr)) |
| punit_ipcdev->base[ISPDRIVER_IPC][BASE_IFACE] = addr; |
| |
| addr = devm_platform_ioremap_resource(pdev, 4); |
| if (!IS_ERR(addr)) |
| punit_ipcdev->base[GTDRIVER_IPC][BASE_DATA] = addr; |
| |
| addr = devm_platform_ioremap_resource(pdev, 5); |
| if (!IS_ERR(addr)) |
| punit_ipcdev->base[GTDRIVER_IPC][BASE_IFACE] = addr; |
| |
| return 0; |
| } |
| |
| static int intel_punit_ipc_probe(struct platform_device *pdev) |
| { |
| int irq, ret; |
| |
| punit_ipcdev = devm_kzalloc(&pdev->dev, |
| sizeof(*punit_ipcdev), GFP_KERNEL); |
| if (!punit_ipcdev) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, punit_ipcdev); |
| |
| irq = platform_get_irq_optional(pdev, 0); |
| if (irq < 0) { |
| dev_warn(&pdev->dev, "Invalid IRQ, using polling mode\n"); |
| } else { |
| ret = devm_request_irq(&pdev->dev, irq, intel_punit_ioc, |
| IRQF_NO_SUSPEND, "intel_punit_ipc", |
| &punit_ipcdev); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to request irq: %d\n", irq); |
| return ret; |
| } |
| punit_ipcdev->irq = irq; |
| } |
| |
| ret = intel_punit_get_bars(pdev); |
| if (ret) |
| return ret; |
| |
| punit_ipcdev->dev = &pdev->dev; |
| mutex_init(&punit_ipcdev->lock); |
| init_completion(&punit_ipcdev->cmd_complete); |
| |
| return 0; |
| } |
| |
| static int intel_punit_ipc_remove(struct platform_device *pdev) |
| { |
| return 0; |
| } |
| |
| static const struct acpi_device_id punit_ipc_acpi_ids[] = { |
| { "INT34D4", 0 }, |
| { } |
| }; |
| |
| static struct platform_driver intel_punit_ipc_driver = { |
| .probe = intel_punit_ipc_probe, |
| .remove = intel_punit_ipc_remove, |
| .driver = { |
| .name = "intel_punit_ipc", |
| .acpi_match_table = ACPI_PTR(punit_ipc_acpi_ids), |
| }, |
| }; |
| |
| static int __init intel_punit_ipc_init(void) |
| { |
| return platform_driver_register(&intel_punit_ipc_driver); |
| } |
| |
| static void __exit intel_punit_ipc_exit(void) |
| { |
| platform_driver_unregister(&intel_punit_ipc_driver); |
| } |
| |
| MODULE_AUTHOR("Zha Qipeng <qipeng.zha@intel.com>"); |
| MODULE_DESCRIPTION("Intel P-Unit IPC driver"); |
| MODULE_LICENSE("GPL v2"); |
| |
| /* Some modules are dependent on this, so init earlier */ |
| fs_initcall(intel_punit_ipc_init); |
| module_exit(intel_punit_ipc_exit); |