| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * xhci-plat.c - xHCI host controller driver platform Bus Glue. |
| * |
| * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com |
| * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de> |
| * |
| * A lot of code borrowed from the Linux xHCI driver. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/usb/phy.h> |
| #include <linux/slab.h> |
| #include <linux/acpi.h> |
| #include <linux/usb/of.h> |
| |
| #include "xhci.h" |
| #include "xhci-plat.h" |
| #include "xhci-mvebu.h" |
| #include "xhci-rcar.h" |
| |
| static struct hc_driver __read_mostly xhci_plat_hc_driver; |
| |
| static int xhci_plat_setup(struct usb_hcd *hcd); |
| static int xhci_plat_start(struct usb_hcd *hcd); |
| |
| static const struct xhci_driver_overrides xhci_plat_overrides __initconst = { |
| .extra_priv_size = sizeof(struct xhci_plat_priv), |
| .reset = xhci_plat_setup, |
| .start = xhci_plat_start, |
| }; |
| |
| static void xhci_priv_plat_start(struct usb_hcd *hcd) |
| { |
| struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); |
| |
| if (priv->plat_start) |
| priv->plat_start(hcd); |
| } |
| |
| static int xhci_priv_init_quirk(struct usb_hcd *hcd) |
| { |
| struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); |
| |
| if (!priv->init_quirk) |
| return 0; |
| |
| return priv->init_quirk(hcd); |
| } |
| |
| static int xhci_priv_suspend_quirk(struct usb_hcd *hcd) |
| { |
| struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); |
| |
| if (!priv->suspend_quirk) |
| return 0; |
| |
| return priv->suspend_quirk(hcd); |
| } |
| |
| static int xhci_priv_resume_quirk(struct usb_hcd *hcd) |
| { |
| struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); |
| |
| if (!priv->resume_quirk) |
| return 0; |
| |
| return priv->resume_quirk(hcd); |
| } |
| |
| static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci) |
| { |
| struct xhci_plat_priv *priv = xhci_to_priv(xhci); |
| |
| /* |
| * As of now platform drivers don't provide MSI support so we ensure |
| * here that the generic code does not try to make a pci_dev from our |
| * dev struct in order to setup MSI |
| */ |
| xhci->quirks |= XHCI_PLAT | priv->quirks; |
| } |
| |
| /* called during probe() after chip reset completes */ |
| static int xhci_plat_setup(struct usb_hcd *hcd) |
| { |
| int ret; |
| |
| |
| ret = xhci_priv_init_quirk(hcd); |
| if (ret) |
| return ret; |
| |
| return xhci_gen_setup(hcd, xhci_plat_quirks); |
| } |
| |
| static int xhci_plat_start(struct usb_hcd *hcd) |
| { |
| xhci_priv_plat_start(hcd); |
| return xhci_run(hcd); |
| } |
| |
| #ifdef CONFIG_OF |
| static const struct xhci_plat_priv xhci_plat_marvell_armada = { |
| .init_quirk = xhci_mvebu_mbus_init_quirk, |
| }; |
| |
| static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = { |
| .init_quirk = xhci_mvebu_a3700_init_quirk, |
| }; |
| |
| static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = { |
| SET_XHCI_PLAT_PRIV_FOR_RCAR(XHCI_RCAR_FIRMWARE_NAME_V1) |
| }; |
| |
| static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = { |
| SET_XHCI_PLAT_PRIV_FOR_RCAR(XHCI_RCAR_FIRMWARE_NAME_V3) |
| }; |
| |
| static const struct xhci_plat_priv xhci_plat_brcm = { |
| .quirks = XHCI_RESET_ON_RESUME, |
| }; |
| |
| static const struct of_device_id usb_xhci_of_match[] = { |
| { |
| .compatible = "generic-xhci", |
| }, { |
| .compatible = "xhci-platform", |
| }, { |
| .compatible = "marvell,armada-375-xhci", |
| .data = &xhci_plat_marvell_armada, |
| }, { |
| .compatible = "marvell,armada-380-xhci", |
| .data = &xhci_plat_marvell_armada, |
| }, { |
| .compatible = "marvell,armada3700-xhci", |
| .data = &xhci_plat_marvell_armada3700, |
| }, { |
| .compatible = "renesas,xhci-r8a7790", |
| .data = &xhci_plat_renesas_rcar_gen2, |
| }, { |
| .compatible = "renesas,xhci-r8a7791", |
| .data = &xhci_plat_renesas_rcar_gen2, |
| }, { |
| .compatible = "renesas,xhci-r8a7793", |
| .data = &xhci_plat_renesas_rcar_gen2, |
| }, { |
| .compatible = "renesas,xhci-r8a7795", |
| .data = &xhci_plat_renesas_rcar_gen3, |
| }, { |
| .compatible = "renesas,xhci-r8a7796", |
| .data = &xhci_plat_renesas_rcar_gen3, |
| }, { |
| .compatible = "renesas,rcar-gen2-xhci", |
| .data = &xhci_plat_renesas_rcar_gen2, |
| }, { |
| .compatible = "renesas,rcar-gen3-xhci", |
| .data = &xhci_plat_renesas_rcar_gen3, |
| }, { |
| .compatible = "brcm,xhci-brcm-v2", |
| .data = &xhci_plat_brcm, |
| }, { |
| .compatible = "brcm,bcm7445-xhci", |
| .data = &xhci_plat_brcm, |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, usb_xhci_of_match); |
| #endif |
| |
| static int xhci_plat_probe(struct platform_device *pdev) |
| { |
| const struct xhci_plat_priv *priv_match; |
| const struct hc_driver *driver; |
| struct device *sysdev, *tmpdev; |
| struct xhci_hcd *xhci; |
| struct resource *res; |
| struct usb_hcd *hcd; |
| int ret; |
| int irq; |
| struct xhci_plat_priv *priv = NULL; |
| |
| |
| if (usb_disabled()) |
| return -ENODEV; |
| |
| driver = &xhci_plat_hc_driver; |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| return irq; |
| |
| /* |
| * sysdev must point to a device that is known to the system firmware |
| * or PCI hardware. We handle these three cases here: |
| * 1. xhci_plat comes from firmware |
| * 2. xhci_plat is child of a device from firmware (dwc3-plat) |
| * 3. xhci_plat is grandchild of a pci device (dwc3-pci) |
| */ |
| for (sysdev = &pdev->dev; sysdev; sysdev = sysdev->parent) { |
| if (is_of_node(sysdev->fwnode) || |
| is_acpi_device_node(sysdev->fwnode)) |
| break; |
| #ifdef CONFIG_PCI |
| else if (sysdev->bus == &pci_bus_type) |
| break; |
| #endif |
| } |
| |
| if (!sysdev) |
| sysdev = &pdev->dev; |
| |
| /* Try to set 64-bit DMA first */ |
| if (WARN_ON(!sysdev->dma_mask)) |
| /* Platform did not initialize dma_mask */ |
| ret = dma_coerce_mask_and_coherent(sysdev, |
| DMA_BIT_MASK(64)); |
| else |
| ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(64)); |
| |
| /* If seting 64-bit DMA mask fails, fall back to 32-bit DMA mask */ |
| if (ret) { |
| ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(32)); |
| if (ret) |
| return ret; |
| } |
| |
| pm_runtime_set_active(&pdev->dev); |
| pm_runtime_enable(&pdev->dev); |
| pm_runtime_get_noresume(&pdev->dev); |
| |
| hcd = __usb_create_hcd(driver, sysdev, &pdev->dev, |
| dev_name(&pdev->dev), NULL); |
| if (!hcd) { |
| ret = -ENOMEM; |
| goto disable_runtime; |
| } |
| |
| hcd->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res); |
| if (IS_ERR(hcd->regs)) { |
| ret = PTR_ERR(hcd->regs); |
| goto put_hcd; |
| } |
| |
| hcd->rsrc_start = res->start; |
| hcd->rsrc_len = resource_size(res); |
| |
| xhci = hcd_to_xhci(hcd); |
| |
| /* |
| * Not all platforms have clks so it is not an error if the |
| * clock do not exist. |
| */ |
| xhci->reg_clk = devm_clk_get_optional(&pdev->dev, "reg"); |
| if (IS_ERR(xhci->reg_clk)) { |
| ret = PTR_ERR(xhci->reg_clk); |
| goto put_hcd; |
| } |
| |
| ret = clk_prepare_enable(xhci->reg_clk); |
| if (ret) |
| goto put_hcd; |
| |
| xhci->clk = devm_clk_get_optional(&pdev->dev, NULL); |
| if (IS_ERR(xhci->clk)) { |
| ret = PTR_ERR(xhci->clk); |
| goto disable_reg_clk; |
| } |
| |
| ret = clk_prepare_enable(xhci->clk); |
| if (ret) |
| goto disable_reg_clk; |
| |
| if (pdev->dev.of_node) |
| priv_match = of_device_get_match_data(&pdev->dev); |
| else |
| priv_match = dev_get_platdata(&pdev->dev); |
| |
| if (priv_match) { |
| priv = hcd_to_xhci_priv(hcd); |
| /* Just copy data for now */ |
| *priv = *priv_match; |
| } |
| |
| device_set_wakeup_capable(&pdev->dev, true); |
| |
| xhci->main_hcd = hcd; |
| xhci->shared_hcd = __usb_create_hcd(driver, sysdev, &pdev->dev, |
| dev_name(&pdev->dev), hcd); |
| if (!xhci->shared_hcd) { |
| ret = -ENOMEM; |
| goto disable_clk; |
| } |
| |
| /* imod_interval is the interrupt moderation value in nanoseconds. */ |
| xhci->imod_interval = 40000; |
| |
| /* Iterate over all parent nodes for finding quirks */ |
| for (tmpdev = &pdev->dev; tmpdev; tmpdev = tmpdev->parent) { |
| |
| if (device_property_read_bool(tmpdev, "usb2-lpm-disable")) |
| xhci->quirks |= XHCI_HW_LPM_DISABLE; |
| |
| if (device_property_read_bool(tmpdev, "usb3-lpm-capable")) |
| xhci->quirks |= XHCI_LPM_SUPPORT; |
| |
| if (device_property_read_bool(tmpdev, "quirk-broken-port-ped")) |
| xhci->quirks |= XHCI_BROKEN_PORT_PED; |
| |
| device_property_read_u32(tmpdev, "imod-interval-ns", |
| &xhci->imod_interval); |
| } |
| |
| hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0); |
| if (IS_ERR(hcd->usb_phy)) { |
| ret = PTR_ERR(hcd->usb_phy); |
| if (ret == -EPROBE_DEFER) |
| goto put_usb3_hcd; |
| hcd->usb_phy = NULL; |
| } else { |
| ret = usb_phy_init(hcd->usb_phy); |
| if (ret) |
| goto put_usb3_hcd; |
| } |
| |
| hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node); |
| xhci->shared_hcd->tpl_support = hcd->tpl_support; |
| if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT)) |
| hcd->skip_phy_initialization = 1; |
| |
| ret = usb_add_hcd(hcd, irq, IRQF_SHARED); |
| if (ret) |
| goto disable_usb_phy; |
| |
| if (HCC_MAX_PSA(xhci->hcc_params) >= 4) |
| xhci->shared_hcd->can_do_streams = 1; |
| |
| ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); |
| if (ret) |
| goto dealloc_usb2_hcd; |
| |
| device_enable_async_suspend(&pdev->dev); |
| pm_runtime_put_noidle(&pdev->dev); |
| |
| /* |
| * Prevent runtime pm from being on as default, users should enable |
| * runtime pm using power/control in sysfs. |
| */ |
| pm_runtime_forbid(&pdev->dev); |
| |
| return 0; |
| |
| |
| dealloc_usb2_hcd: |
| usb_remove_hcd(hcd); |
| |
| disable_usb_phy: |
| usb_phy_shutdown(hcd->usb_phy); |
| |
| put_usb3_hcd: |
| usb_put_hcd(xhci->shared_hcd); |
| |
| disable_clk: |
| clk_disable_unprepare(xhci->clk); |
| |
| disable_reg_clk: |
| clk_disable_unprepare(xhci->reg_clk); |
| |
| put_hcd: |
| usb_put_hcd(hcd); |
| |
| disable_runtime: |
| pm_runtime_put_noidle(&pdev->dev); |
| pm_runtime_disable(&pdev->dev); |
| |
| return ret; |
| } |
| |
| static int xhci_plat_remove(struct platform_device *dev) |
| { |
| struct usb_hcd *hcd = platform_get_drvdata(dev); |
| struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| struct clk *clk = xhci->clk; |
| struct clk *reg_clk = xhci->reg_clk; |
| struct usb_hcd *shared_hcd = xhci->shared_hcd; |
| |
| pm_runtime_get_sync(&dev->dev); |
| xhci->xhc_state |= XHCI_STATE_REMOVING; |
| |
| usb_remove_hcd(shared_hcd); |
| xhci->shared_hcd = NULL; |
| usb_phy_shutdown(hcd->usb_phy); |
| |
| usb_remove_hcd(hcd); |
| usb_put_hcd(shared_hcd); |
| |
| clk_disable_unprepare(clk); |
| clk_disable_unprepare(reg_clk); |
| usb_put_hcd(hcd); |
| |
| pm_runtime_disable(&dev->dev); |
| pm_runtime_put_noidle(&dev->dev); |
| pm_runtime_set_suspended(&dev->dev); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused xhci_plat_suspend(struct device *dev) |
| { |
| struct usb_hcd *hcd = dev_get_drvdata(dev); |
| struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| int ret; |
| |
| ret = xhci_priv_suspend_quirk(hcd); |
| if (ret) |
| return ret; |
| /* |
| * xhci_suspend() needs `do_wakeup` to know whether host is allowed |
| * to do wakeup during suspend. |
| */ |
| return xhci_suspend(xhci, device_may_wakeup(dev)); |
| } |
| |
| static int __maybe_unused xhci_plat_resume(struct device *dev) |
| { |
| struct usb_hcd *hcd = dev_get_drvdata(dev); |
| struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| int ret; |
| |
| ret = xhci_priv_resume_quirk(hcd); |
| if (ret) |
| return ret; |
| |
| ret = xhci_resume(xhci, 0); |
| if (ret) |
| return ret; |
| |
| pm_runtime_disable(dev); |
| pm_runtime_set_active(dev); |
| pm_runtime_enable(dev); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev) |
| { |
| struct usb_hcd *hcd = dev_get_drvdata(dev); |
| struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| int ret; |
| |
| ret = xhci_priv_suspend_quirk(hcd); |
| if (ret) |
| return ret; |
| |
| return xhci_suspend(xhci, true); |
| } |
| |
| static int __maybe_unused xhci_plat_runtime_resume(struct device *dev) |
| { |
| struct usb_hcd *hcd = dev_get_drvdata(dev); |
| struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| |
| return xhci_resume(xhci, 0); |
| } |
| |
| static const struct dev_pm_ops xhci_plat_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume) |
| |
| SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend, |
| xhci_plat_runtime_resume, |
| NULL) |
| }; |
| |
| #ifdef CONFIG_ACPI |
| static const struct acpi_device_id usb_xhci_acpi_match[] = { |
| /* XHCI-compliant USB Controller */ |
| { "PNP0D10", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match); |
| #endif |
| |
| static struct platform_driver usb_xhci_driver = { |
| .probe = xhci_plat_probe, |
| .remove = xhci_plat_remove, |
| .shutdown = usb_hcd_platform_shutdown, |
| .driver = { |
| .name = "xhci-hcd", |
| .pm = &xhci_plat_pm_ops, |
| .of_match_table = of_match_ptr(usb_xhci_of_match), |
| .acpi_match_table = ACPI_PTR(usb_xhci_acpi_match), |
| }, |
| }; |
| MODULE_ALIAS("platform:xhci-hcd"); |
| |
| static int __init xhci_plat_init(void) |
| { |
| xhci_init_driver(&xhci_plat_hc_driver, &xhci_plat_overrides); |
| return platform_driver_register(&usb_xhci_driver); |
| } |
| module_init(xhci_plat_init); |
| |
| static void __exit xhci_plat_exit(void) |
| { |
| platform_driver_unregister(&usb_xhci_driver); |
| } |
| module_exit(xhci_plat_exit); |
| |
| MODULE_DESCRIPTION("xHCI Platform Host Controller Driver"); |
| MODULE_LICENSE("GPL"); |