| /* |
| * Copyright 2016 Advanced Micro Devices, Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * Authors: AMD |
| * |
| */ |
| |
| #include "dm_services.h" |
| #include "core_types.h" |
| #include "resource.h" |
| #include "custom_float.h" |
| #include "dcn10_hw_sequencer.h" |
| #include "dce110/dce110_hw_sequencer.h" |
| #include "dce/dce_hwseq.h" |
| #include "abm.h" |
| #include "dmcu.h" |
| #include "dcn10_optc.h" |
| #include "dcn10/dcn10_dpp.h" |
| #include "dcn10/dcn10_mpc.h" |
| #include "timing_generator.h" |
| #include "opp.h" |
| #include "ipp.h" |
| #include "mpc.h" |
| #include "reg_helper.h" |
| #include "custom_float.h" |
| #include "dcn10_hubp.h" |
| #include "dcn10_hubbub.h" |
| #include "dcn10_cm_common.h" |
| |
| #define CTX \ |
| hws->ctx |
| #define REG(reg)\ |
| hws->regs->reg |
| |
| #undef FN |
| #define FN(reg_name, field_name) \ |
| hws->shifts->field_name, hws->masks->field_name |
| |
| #define DTN_INFO_MICRO_SEC(ref_cycle) \ |
| print_microsec(dc_ctx, ref_cycle) |
| |
| void print_microsec(struct dc_context *dc_ctx, uint32_t ref_cycle) |
| { |
| static const uint32_t ref_clk_mhz = 48; |
| static const unsigned int frac = 10; |
| uint32_t us_x10 = (ref_cycle * frac) / ref_clk_mhz; |
| |
| DTN_INFO("%d.%d \t ", |
| us_x10 / frac, |
| us_x10 % frac); |
| } |
| |
| |
| static void log_mpc_crc(struct dc *dc) |
| { |
| struct dc_context *dc_ctx = dc->ctx; |
| struct dce_hwseq *hws = dc->hwseq; |
| |
| if (REG(MPC_CRC_RESULT_GB)) |
| DTN_INFO("MPC_CRC_RESULT_GB:%d MPC_CRC_RESULT_C:%d MPC_CRC_RESULT_AR:%d\n", |
| REG_READ(MPC_CRC_RESULT_GB), REG_READ(MPC_CRC_RESULT_C), REG_READ(MPC_CRC_RESULT_AR)); |
| if (REG(DPP_TOP0_DPP_CRC_VAL_B_A)) |
| DTN_INFO("DPP_TOP0_DPP_CRC_VAL_B_A:%d DPP_TOP0_DPP_CRC_VAL_R_G:%d\n", |
| REG_READ(DPP_TOP0_DPP_CRC_VAL_B_A), REG_READ(DPP_TOP0_DPP_CRC_VAL_R_G)); |
| } |
| |
| void dcn10_log_hubbub_state(struct dc *dc) |
| { |
| struct dc_context *dc_ctx = dc->ctx; |
| struct dcn_hubbub_wm wm; |
| int i; |
| |
| hubbub1_wm_read_state(dc->res_pool->hubbub, &wm); |
| |
| DTN_INFO("HUBBUB WM: \t data_urgent \t pte_meta_urgent \t " |
| "sr_enter \t sr_exit \t dram_clk_change \n"); |
| |
| for (i = 0; i < 4; i++) { |
| struct dcn_hubbub_wm_set *s; |
| |
| s = &wm.sets[i]; |
| DTN_INFO("WM_Set[%d]:\t ", s->wm_set); |
| DTN_INFO_MICRO_SEC(s->data_urgent); |
| DTN_INFO_MICRO_SEC(s->pte_meta_urgent); |
| DTN_INFO_MICRO_SEC(s->sr_enter); |
| DTN_INFO_MICRO_SEC(s->sr_exit); |
| DTN_INFO_MICRO_SEC(s->dram_clk_chanage); |
| DTN_INFO("\n"); |
| } |
| |
| DTN_INFO("\n"); |
| } |
| |
| void dcn10_log_hw_state(struct dc *dc) |
| { |
| struct dc_context *dc_ctx = dc->ctx; |
| struct resource_pool *pool = dc->res_pool; |
| int i; |
| |
| DTN_INFO_BEGIN(); |
| |
| dcn10_log_hubbub_state(dc); |
| |
| DTN_INFO("HUBP:\t format \t addr_hi \t width \t height \t " |
| "rotation \t mirror \t sw_mode \t " |
| "dcc_en \t blank_en \t ttu_dis \t underflow \t " |
| "min_ttu_vblank \t qos_low_wm \t qos_high_wm \n"); |
| |
| for (i = 0; i < pool->pipe_count; i++) { |
| struct hubp *hubp = pool->hubps[i]; |
| struct dcn_hubp_state s; |
| |
| hubp1_read_state(TO_DCN10_HUBP(hubp), &s); |
| |
| DTN_INFO("[%d]:\t %xh \t %xh \t %d \t %d \t " |
| "%xh \t %xh \t %xh \t " |
| "%d \t %d \t %d \t %xh \t", |
| i, |
| s.pixel_format, |
| s.inuse_addr_hi, |
| s.viewport_width, |
| s.viewport_height, |
| s.rotation_angle, |
| s.h_mirror_en, |
| s.sw_mode, |
| s.dcc_en, |
| s.blank_en, |
| s.ttu_disable, |
| s.underflow_status); |
| DTN_INFO_MICRO_SEC(s.min_ttu_vblank); |
| DTN_INFO_MICRO_SEC(s.qos_level_low_wm); |
| DTN_INFO_MICRO_SEC(s.qos_level_high_wm); |
| DTN_INFO("\n"); |
| } |
| DTN_INFO("\n"); |
| |
| DTN_INFO("OTG:\t v_bs \t v_be \t v_ss \t v_se \t vpol \t vmax \t vmin \t " |
| "h_bs \t h_be \t h_ss \t h_se \t hpol \t htot \t vtot \t underflow\n"); |
| |
| for (i = 0; i < pool->res_cap->num_timing_generator; i++) { |
| struct timing_generator *tg = pool->timing_generators[i]; |
| struct dcn_otg_state s = {0}; |
| |
| optc1_read_otg_state(DCN10TG_FROM_TG(tg), &s); |
| |
| //only print if OTG master is enabled |
| if ((s.otg_enabled & 1) == 0) |
| continue; |
| |
| DTN_INFO("[%d]:\t %d \t %d \t %d \t %d \t " |
| "%d \t %d \t %d \t %d \t %d \t %d \t " |
| "%d \t %d \t %d \t %d \t %d \t ", |
| i, |
| s.v_blank_start, |
| s.v_blank_end, |
| s.v_sync_a_start, |
| s.v_sync_a_end, |
| s.v_sync_a_pol, |
| s.v_total_max, |
| s.v_total_min, |
| s.h_blank_start, |
| s.h_blank_end, |
| s.h_sync_a_start, |
| s.h_sync_a_end, |
| s.h_sync_a_pol, |
| s.h_total, |
| s.v_total, |
| s.underflow_occurred_status); |
| DTN_INFO("\n"); |
| } |
| DTN_INFO("\n"); |
| |
| log_mpc_crc(dc); |
| |
| DTN_INFO_END(); |
| } |
| |
| static void enable_dppclk( |
| struct dce_hwseq *hws, |
| uint8_t plane_id, |
| uint32_t requested_pix_clk, |
| bool dppclk_div) |
| { |
| dm_logger_write(hws->ctx->logger, LOG_SURFACE, |
| "dppclk_rate_control for pipe %d programed to %d\n", |
| plane_id, |
| dppclk_div); |
| |
| if (hws->shifts->DPPCLK_RATE_CONTROL) |
| REG_UPDATE_2(DPP_CONTROL[plane_id], |
| DPPCLK_RATE_CONTROL, dppclk_div, |
| DPP_CLOCK_ENABLE, 1); |
| else |
| REG_UPDATE(DPP_CONTROL[plane_id], |
| DPP_CLOCK_ENABLE, 1); |
| } |
| |
| static void enable_power_gating_plane( |
| struct dce_hwseq *hws, |
| bool enable) |
| { |
| bool force_on = 1; /* disable power gating */ |
| |
| if (enable) |
| force_on = 0; |
| |
| /* DCHUBP0/1/2/3 */ |
| REG_UPDATE(DOMAIN0_PG_CONFIG, DOMAIN0_POWER_FORCEON, force_on); |
| REG_UPDATE(DOMAIN2_PG_CONFIG, DOMAIN2_POWER_FORCEON, force_on); |
| REG_UPDATE(DOMAIN4_PG_CONFIG, DOMAIN4_POWER_FORCEON, force_on); |
| REG_UPDATE(DOMAIN6_PG_CONFIG, DOMAIN6_POWER_FORCEON, force_on); |
| |
| /* DPP0/1/2/3 */ |
| REG_UPDATE(DOMAIN1_PG_CONFIG, DOMAIN1_POWER_FORCEON, force_on); |
| REG_UPDATE(DOMAIN3_PG_CONFIG, DOMAIN3_POWER_FORCEON, force_on); |
| REG_UPDATE(DOMAIN5_PG_CONFIG, DOMAIN5_POWER_FORCEON, force_on); |
| REG_UPDATE(DOMAIN7_PG_CONFIG, DOMAIN7_POWER_FORCEON, force_on); |
| } |
| |
| static void disable_vga( |
| struct dce_hwseq *hws) |
| { |
| unsigned int in_vga1_mode = 0; |
| unsigned int in_vga2_mode = 0; |
| unsigned int in_vga3_mode = 0; |
| unsigned int in_vga4_mode = 0; |
| |
| REG_GET(D1VGA_CONTROL, D1VGA_MODE_ENABLE, &in_vga1_mode); |
| REG_GET(D2VGA_CONTROL, D2VGA_MODE_ENABLE, &in_vga2_mode); |
| REG_GET(D3VGA_CONTROL, D3VGA_MODE_ENABLE, &in_vga3_mode); |
| REG_GET(D4VGA_CONTROL, D4VGA_MODE_ENABLE, &in_vga4_mode); |
| |
| if (in_vga1_mode == 0 && in_vga2_mode == 0 && |
| in_vga3_mode == 0 && in_vga4_mode == 0) |
| return; |
| |
| REG_WRITE(D1VGA_CONTROL, 0); |
| REG_WRITE(D2VGA_CONTROL, 0); |
| REG_WRITE(D3VGA_CONTROL, 0); |
| REG_WRITE(D4VGA_CONTROL, 0); |
| |
| /* HW Engineer's Notes: |
| * During switch from vga->extended, if we set the VGA_TEST_ENABLE and |
| * then hit the VGA_TEST_RENDER_START, then the DCHUBP timing gets updated correctly. |
| * |
| * Then vBIOS will have it poll for the VGA_TEST_RENDER_DONE and unset |
| * VGA_TEST_ENABLE, to leave it in the same state as before. |
| */ |
| REG_UPDATE(VGA_TEST_CONTROL, VGA_TEST_ENABLE, 1); |
| REG_UPDATE(VGA_TEST_CONTROL, VGA_TEST_RENDER_START, 1); |
| } |
| |
| static void dpp_pg_control( |
| struct dce_hwseq *hws, |
| unsigned int dpp_inst, |
| bool power_on) |
| { |
| uint32_t power_gate = power_on ? 0 : 1; |
| uint32_t pwr_status = power_on ? 0 : 2; |
| |
| if (hws->ctx->dc->debug.disable_dpp_power_gate) |
| return; |
| |
| switch (dpp_inst) { |
| case 0: /* DPP0 */ |
| REG_UPDATE(DOMAIN1_PG_CONFIG, |
| DOMAIN1_POWER_GATE, power_gate); |
| |
| REG_WAIT(DOMAIN1_PG_STATUS, |
| DOMAIN1_PGFSM_PWR_STATUS, pwr_status, |
| 1, 1000); |
| break; |
| case 1: /* DPP1 */ |
| REG_UPDATE(DOMAIN3_PG_CONFIG, |
| DOMAIN3_POWER_GATE, power_gate); |
| |
| REG_WAIT(DOMAIN3_PG_STATUS, |
| DOMAIN3_PGFSM_PWR_STATUS, pwr_status, |
| 1, 1000); |
| break; |
| case 2: /* DPP2 */ |
| REG_UPDATE(DOMAIN5_PG_CONFIG, |
| DOMAIN5_POWER_GATE, power_gate); |
| |
| REG_WAIT(DOMAIN5_PG_STATUS, |
| DOMAIN5_PGFSM_PWR_STATUS, pwr_status, |
| 1, 1000); |
| break; |
| case 3: /* DPP3 */ |
| REG_UPDATE(DOMAIN7_PG_CONFIG, |
| DOMAIN7_POWER_GATE, power_gate); |
| |
| REG_WAIT(DOMAIN7_PG_STATUS, |
| DOMAIN7_PGFSM_PWR_STATUS, pwr_status, |
| 1, 1000); |
| break; |
| default: |
| BREAK_TO_DEBUGGER(); |
| break; |
| } |
| } |
| |
| static void hubp_pg_control( |
| struct dce_hwseq *hws, |
| unsigned int hubp_inst, |
| bool power_on) |
| { |
| uint32_t power_gate = power_on ? 0 : 1; |
| uint32_t pwr_status = power_on ? 0 : 2; |
| |
| if (hws->ctx->dc->debug.disable_hubp_power_gate) |
| return; |
| |
| switch (hubp_inst) { |
| case 0: /* DCHUBP0 */ |
| REG_UPDATE(DOMAIN0_PG_CONFIG, |
| DOMAIN0_POWER_GATE, power_gate); |
| |
| REG_WAIT(DOMAIN0_PG_STATUS, |
| DOMAIN0_PGFSM_PWR_STATUS, pwr_status, |
| 1, 1000); |
| break; |
| case 1: /* DCHUBP1 */ |
| REG_UPDATE(DOMAIN2_PG_CONFIG, |
| DOMAIN2_POWER_GATE, power_gate); |
| |
| REG_WAIT(DOMAIN2_PG_STATUS, |
| DOMAIN2_PGFSM_PWR_STATUS, pwr_status, |
| 1, 1000); |
| break; |
| case 2: /* DCHUBP2 */ |
| REG_UPDATE(DOMAIN4_PG_CONFIG, |
| DOMAIN4_POWER_GATE, power_gate); |
| |
| REG_WAIT(DOMAIN4_PG_STATUS, |
| DOMAIN4_PGFSM_PWR_STATUS, pwr_status, |
| 1, 1000); |
| break; |
| case 3: /* DCHUBP3 */ |
| REG_UPDATE(DOMAIN6_PG_CONFIG, |
| DOMAIN6_POWER_GATE, power_gate); |
| |
| REG_WAIT(DOMAIN6_PG_STATUS, |
| DOMAIN6_PGFSM_PWR_STATUS, pwr_status, |
| 1, 1000); |
| break; |
| default: |
| BREAK_TO_DEBUGGER(); |
| break; |
| } |
| } |
| |
| static void power_on_plane( |
| struct dce_hwseq *hws, |
| int plane_id) |
| { |
| if (REG(DC_IP_REQUEST_CNTL)) { |
| REG_SET(DC_IP_REQUEST_CNTL, 0, |
| IP_REQUEST_EN, 1); |
| dpp_pg_control(hws, plane_id, true); |
| hubp_pg_control(hws, plane_id, true); |
| REG_SET(DC_IP_REQUEST_CNTL, 0, |
| IP_REQUEST_EN, 0); |
| dm_logger_write(hws->ctx->logger, LOG_DEBUG, |
| "Un-gated front end for pipe %d\n", plane_id); |
| } |
| } |
| |
| static void undo_DEGVIDCN10_253_wa(struct dc *dc) |
| { |
| struct dce_hwseq *hws = dc->hwseq; |
| struct hubp *hubp = dc->res_pool->hubps[0]; |
| |
| if (!hws->wa_state.DEGVIDCN10_253_applied) |
| return; |
| |
| hubp->funcs->set_blank(hubp, true); |
| |
| REG_SET(DC_IP_REQUEST_CNTL, 0, |
| IP_REQUEST_EN, 1); |
| |
| hubp_pg_control(hws, 0, false); |
| REG_SET(DC_IP_REQUEST_CNTL, 0, |
| IP_REQUEST_EN, 0); |
| |
| hws->wa_state.DEGVIDCN10_253_applied = false; |
| } |
| |
| static void apply_DEGVIDCN10_253_wa(struct dc *dc) |
| { |
| struct dce_hwseq *hws = dc->hwseq; |
| struct hubp *hubp = dc->res_pool->hubps[0]; |
| int i; |
| |
| if (dc->debug.disable_stutter) |
| return; |
| |
| if (!hws->wa.DEGVIDCN10_253) |
| return; |
| |
| for (i = 0; i < dc->res_pool->pipe_count; i++) { |
| if (!dc->res_pool->hubps[i]->power_gated) |
| return; |
| } |
| |
| /* all pipe power gated, apply work around to enable stutter. */ |
| |
| REG_SET(DC_IP_REQUEST_CNTL, 0, |
| IP_REQUEST_EN, 1); |
| |
| hubp_pg_control(hws, 0, true); |
| REG_SET(DC_IP_REQUEST_CNTL, 0, |
| IP_REQUEST_EN, 0); |
| |
| hubp->funcs->set_hubp_blank_en(hubp, false); |
| hws->wa_state.DEGVIDCN10_253_applied = true; |
| } |
| |
| static void bios_golden_init(struct dc *dc) |
| { |
| struct dc_bios *bp = dc->ctx->dc_bios; |
| int i; |
| |
| /* initialize dcn global */ |
| bp->funcs->enable_disp_power_gating(bp, |
| CONTROLLER_ID_D0, ASIC_PIPE_INIT); |
| |
| for (i = 0; i < dc->res_pool->pipe_count; i++) { |
| /* initialize dcn per pipe */ |
| bp->funcs->enable_disp_power_gating(bp, |
| CONTROLLER_ID_D0 + i, ASIC_PIPE_DISABLE); |
| } |
| } |
| |
| static void false_optc_underflow_wa( |
| struct dc *dc, |
| const struct dc_stream_state *stream, |
| struct timing_generator *tg) |
| { |
| int i; |
| bool underflow; |
| |
| if (!dc->hwseq->wa.false_optc_underflow) |
| return; |
| |
| underflow = tg->funcs->is_optc_underflow_occurred(tg); |
| |
| for (i = 0; i < dc->res_pool->pipe_count; i++) { |
| struct pipe_ctx *old_pipe_ctx = &dc->current_state->res_ctx.pipe_ctx[i]; |
| |
| if (old_pipe_ctx->stream != stream) |
| continue; |
| |
| dc->hwss.wait_for_mpcc_disconnect(dc, dc->res_pool, old_pipe_ctx); |
| } |
| |
| tg->funcs->set_blank_data_double_buffer(tg, true); |
| |
| if (tg->funcs->is_optc_underflow_occurred(tg) && !underflow) |
| tg->funcs->clear_optc_underflow(tg); |
| } |
| |
| static enum dc_status dcn10_prog_pixclk_crtc_otg( |
| struct pipe_ctx *pipe_ctx, |
| struct dc_state *context, |
| struct dc *dc) |
| { |
| struct dc_stream_state *stream = pipe_ctx->stream; |
| enum dc_color_space color_space; |
| struct tg_color black_color = {0}; |
| |
| /* by upper caller loop, pipe0 is parent pipe and be called first. |
| * back end is set up by for pipe0. Other children pipe share back end |
| * with pipe 0. No program is needed. |
| */ |
| if (pipe_ctx->top_pipe != NULL) |
| return DC_OK; |
| |
| /* TODO check if timing_changed, disable stream if timing changed */ |
| |
| /* HW program guide assume display already disable |
| * by unplug sequence. OTG assume stop. |
| */ |
| pipe_ctx->stream_res.tg->funcs->enable_optc_clock(pipe_ctx->stream_res.tg, true); |
| |
| if (false == pipe_ctx->clock_source->funcs->program_pix_clk( |
| pipe_ctx->clock_source, |
| &pipe_ctx->stream_res.pix_clk_params, |
| &pipe_ctx->pll_settings)) { |
| BREAK_TO_DEBUGGER(); |
| return DC_ERROR_UNEXPECTED; |
| } |
| pipe_ctx->stream_res.tg->dlg_otg_param.vready_offset = pipe_ctx->pipe_dlg_param.vready_offset; |
| pipe_ctx->stream_res.tg->dlg_otg_param.vstartup_start = pipe_ctx->pipe_dlg_param.vstartup_start; |
| pipe_ctx->stream_res.tg->dlg_otg_param.vupdate_offset = pipe_ctx->pipe_dlg_param.vupdate_offset; |
| pipe_ctx->stream_res.tg->dlg_otg_param.vupdate_width = pipe_ctx->pipe_dlg_param.vupdate_width; |
| |
| pipe_ctx->stream_res.tg->dlg_otg_param.signal = pipe_ctx->stream->signal; |
| |
| pipe_ctx->stream_res.tg->funcs->program_timing( |
| pipe_ctx->stream_res.tg, |
| &stream->timing, |
| true); |
| |
| #if 0 /* move to after enable_crtc */ |
| /* TODO: OPP FMT, ABM. etc. should be done here. */ |
| /* or FPGA now. instance 0 only. TODO: move to opp.c */ |
| |
| inst_offset = reg_offsets[pipe_ctx->stream_res.tg->inst].fmt; |
| |
| pipe_ctx->stream_res.opp->funcs->opp_program_fmt( |
| pipe_ctx->stream_res.opp, |
| &stream->bit_depth_params, |
| &stream->clamping); |
| #endif |
| /* program otg blank color */ |
| color_space = stream->output_color_space; |
| color_space_to_black_color(dc, color_space, &black_color); |
| |
| if (pipe_ctx->stream_res.tg->funcs->set_blank_color) |
| pipe_ctx->stream_res.tg->funcs->set_blank_color( |
| pipe_ctx->stream_res.tg, |
| &black_color); |
| |
| if (pipe_ctx->stream_res.tg->funcs->is_blanked && |
| !pipe_ctx->stream_res.tg->funcs->is_blanked(pipe_ctx->stream_res.tg)) { |
| pipe_ctx->stream_res.tg->funcs->set_blank(pipe_ctx->stream_res.tg, true); |
| hwss_wait_for_blank_complete(pipe_ctx->stream_res.tg); |
| false_optc_underflow_wa(dc, pipe_ctx->stream, pipe_ctx->stream_res.tg); |
| } |
| |
| /* VTG is within DCHUB command block. DCFCLK is always on */ |
| if (false == pipe_ctx->stream_res.tg->funcs->enable_crtc(pipe_ctx->stream_res.tg)) { |
| BREAK_TO_DEBUGGER(); |
| return DC_ERROR_UNEXPECTED; |
| } |
| |
| /* TODO program crtc source select for non-virtual signal*/ |
| /* TODO program FMT */ |
| /* TODO setup link_enc */ |
| /* TODO set stream attributes */ |
| /* TODO program audio */ |
| /* TODO enable stream if timing changed */ |
| /* TODO unblank stream if DP */ |
| |
| return DC_OK; |
| } |
| |
| static void reset_back_end_for_pipe( |
| struct dc *dc, |
| struct pipe_ctx *pipe_ctx, |
| struct dc_state *context) |
| { |
| int i; |
| |
| if (pipe_ctx->stream_res.stream_enc == NULL) { |
| pipe_ctx->stream = NULL; |
| return; |
| } |
| |
| if (!IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment)) { |
| /* DPMS may already disable */ |
| if (!pipe_ctx->stream->dpms_off) |
| core_link_disable_stream(pipe_ctx, FREE_ACQUIRED_RESOURCE); |
| } |
| |
| /* by upper caller loop, parent pipe: pipe0, will be reset last. |
| * back end share by all pipes and will be disable only when disable |
| * parent pipe. |
| */ |
| if (pipe_ctx->top_pipe == NULL) { |
| pipe_ctx->stream_res.tg->funcs->disable_crtc(pipe_ctx->stream_res.tg); |
| |
| pipe_ctx->stream_res.tg->funcs->enable_optc_clock(pipe_ctx->stream_res.tg, false); |
| } |
| |
| for (i = 0; i < dc->res_pool->pipe_count; i++) |
| if (&dc->current_state->res_ctx.pipe_ctx[i] == pipe_ctx) |
| break; |
| |
| if (i == dc->res_pool->pipe_count) |
| return; |
| |
| pipe_ctx->stream = NULL; |
| dm_logger_write(dc->ctx->logger, LOG_DEBUG, |
| "Reset back end for pipe %d, tg:%d\n", |
| pipe_ctx->pipe_idx, pipe_ctx->stream_res.tg->inst); |
| } |
| |
| static void dcn10_verify_allow_pstate_change_high(struct dc *dc) |
| { |
| static bool should_log_hw_state; /* prevent hw state log by default */ |
| |
| if (!hubbub1_verify_allow_pstate_change_high(dc->res_pool->hubbub)) { |
| if (should_log_hw_state) { |
| dcn10_log_hw_state(dc); |
| } |
| |
| BREAK_TO_DEBUGGER(); |
| } |
| } |
| |
| /* trigger HW to start disconnect plane from stream on the next vsync */ |
| static void plane_atomic_disconnect(struct dc *dc, struct pipe_ctx *pipe_ctx) |
| { |
| int fe_idx = pipe_ctx->pipe_idx; |
| struct hubp *hubp = dc->res_pool->hubps[fe_idx]; |
| struct mpc *mpc = dc->res_pool->mpc; |
| int opp_id; |
| struct mpc_tree *mpc_tree_params; |
| struct mpcc *mpcc_to_remove = NULL; |
| |
| /* look at tree rather than mi here to know if we already reset */ |
| for (opp_id = 0; opp_id < dc->res_pool->pipe_count; opp_id++) { |
| struct output_pixel_processor *opp = dc->res_pool->opps[opp_id]; |
| |
| mpc_tree_params = &(opp->mpc_tree_params); |
| mpcc_to_remove = mpc->funcs->get_mpcc_for_dpp(mpc_tree_params, fe_idx); |
| if (mpcc_to_remove != NULL) |
| break; |
| } |
| |
| /*Already reset*/ |
| if (opp_id == dc->res_pool->pipe_count) |
| return; |
| |
| mpc->funcs->remove_mpcc(mpc, mpc_tree_params, mpcc_to_remove); |
| dc->res_pool->opps[opp_id]->mpcc_disconnect_pending[fe_idx] = true; |
| |
| dc->optimized_required = true; |
| |
| if (hubp->funcs->hubp_disconnect) |
| hubp->funcs->hubp_disconnect(hubp); |
| |
| if (dc->debug.sanity_checks) |
| dcn10_verify_allow_pstate_change_high(dc); |
| } |
| |
| static void plane_atomic_power_down(struct dc *dc, int fe_idx) |
| { |
| struct dce_hwseq *hws = dc->hwseq; |
| struct dpp *dpp = dc->res_pool->dpps[fe_idx]; |
| |
| if (REG(DC_IP_REQUEST_CNTL)) { |
| REG_SET(DC_IP_REQUEST_CNTL, 0, |
| IP_REQUEST_EN, 1); |
| dpp_pg_control(hws, fe_idx, false); |
| hubp_pg_control(hws, fe_idx, false); |
| dpp->funcs->dpp_reset(dpp); |
| REG_SET(DC_IP_REQUEST_CNTL, 0, |
| IP_REQUEST_EN, 0); |
| dm_logger_write(dc->ctx->logger, LOG_DEBUG, |
| "Power gated front end %d\n", fe_idx); |
| } |
| } |
| |
| /* disable HW used by plane. |
| * note: cannot disable until disconnect is complete |
| */ |
| static void plane_atomic_disable(struct dc *dc, struct pipe_ctx *pipe_ctx) |
| { |
| int fe_idx = pipe_ctx->pipe_idx; |
| struct dce_hwseq *hws = dc->hwseq; |
| struct hubp *hubp = dc->res_pool->hubps[fe_idx]; |
| int opp_id = hubp->opp_id; |
| |
| dc->hwss.wait_for_mpcc_disconnect(dc, dc->res_pool, pipe_ctx); |
| |
| REG_UPDATE(HUBP_CLK_CNTL[fe_idx], |
| HUBP_CLOCK_ENABLE, 0); |
| REG_UPDATE(DPP_CONTROL[fe_idx], |
| DPP_CLOCK_ENABLE, 0); |
| |
| if (opp_id != 0xf && dc->res_pool->opps[opp_id]->mpc_tree_params.opp_list == NULL) |
| REG_UPDATE(OPP_PIPE_CONTROL[opp_id], |
| OPP_PIPE_CLOCK_EN, 0); |
| |
| hubp->power_gated = true; |
| dc->optimized_required = false; /* We're powering off, no need to optimize */ |
| |
| plane_atomic_power_down(dc, fe_idx); |
| |
| pipe_ctx->stream = NULL; |
| memset(&pipe_ctx->stream_res, 0, sizeof(pipe_ctx->stream_res)); |
| memset(&pipe_ctx->plane_res, 0, sizeof(pipe_ctx->plane_res)); |
| pipe_ctx->top_pipe = NULL; |
| pipe_ctx->bottom_pipe = NULL; |
| pipe_ctx->plane_state = NULL; |
| } |
| |
| static void dcn10_disable_plane(struct dc *dc, struct pipe_ctx *pipe_ctx) |
| { |
| if (dc->res_pool->hubps[pipe_ctx->pipe_idx]->power_gated) |
| return; |
| |
| plane_atomic_disable(dc, pipe_ctx); |
| |
| apply_DEGVIDCN10_253_wa(dc); |
| |
| dm_logger_write(dc->ctx->logger, LOG_DC, |
| "Power down front end %d\n", |
| pipe_ctx->pipe_idx); |
| } |
| |
| static void dcn10_init_hw(struct dc *dc) |
| { |
| int i; |
| struct abm *abm = dc->res_pool->abm; |
| struct dmcu *dmcu = dc->res_pool->dmcu; |
| struct dce_hwseq *hws = dc->hwseq; |
| struct dc_bios *dcb = dc->ctx->dc_bios; |
| struct dc_state *context = dc->current_state; |
| |
| if (IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment)) { |
| REG_WRITE(REFCLK_CNTL, 0); |
| REG_UPDATE(DCHUBBUB_GLOBAL_TIMER_CNTL, DCHUBBUB_GLOBAL_TIMER_ENABLE, 1); |
| REG_WRITE(DIO_MEM_PWR_CTRL, 0); |
| |
| if (!dc->debug.disable_clock_gate) { |
| /* enable all DCN clock gating */ |
| REG_WRITE(DCCG_GATE_DISABLE_CNTL, 0); |
| |
| REG_WRITE(DCCG_GATE_DISABLE_CNTL2, 0); |
| |
| REG_UPDATE(DCFCLK_CNTL, DCFCLK_GATE_DIS, 0); |
| } |
| |
| enable_power_gating_plane(dc->hwseq, true); |
| return; |
| } |
| /* end of FPGA. Below if real ASIC */ |
| |
| if (!dcb->funcs->is_accelerated_mode(dcb)) { |
| bios_golden_init(dc); |
| disable_vga(dc->hwseq); |
| } |
| |
| for (i = 0; i < dc->link_count; i++) { |
| /* Power up AND update implementation according to the |
| * required signal (which may be different from the |
| * default signal on connector). |
| */ |
| struct dc_link *link = dc->links[i]; |
| |
| if (link->link_enc->connector.id == CONNECTOR_ID_EDP) |
| dc->hwss.edp_power_control(link, true); |
| |
| link->link_enc->funcs->hw_init(link->link_enc); |
| } |
| |
| for (i = 0; i < dc->res_pool->pipe_count; i++) { |
| struct timing_generator *tg = dc->res_pool->timing_generators[i]; |
| |
| if (tg->funcs->is_tg_enabled(tg)) |
| tg->funcs->lock(tg); |
| } |
| |
| /* Blank controller using driver code instead of |
| * command table. |
| */ |
| for (i = 0; i < dc->res_pool->pipe_count; i++) { |
| struct timing_generator *tg = dc->res_pool->timing_generators[i]; |
| |
| if (tg->funcs->is_tg_enabled(tg)) { |
| tg->funcs->set_blank(tg, true); |
| hwss_wait_for_blank_complete(tg); |
| } |
| } |
| |
| /* Reset all MPCC muxes */ |
| dc->res_pool->mpc->funcs->mpc_init(dc->res_pool->mpc); |
| |
| for (i = 0; i < dc->res_pool->pipe_count; i++) { |
| struct timing_generator *tg = dc->res_pool->timing_generators[i]; |
| struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i]; |
| struct hubp *hubp = dc->res_pool->hubps[i]; |
| |
| pipe_ctx->stream_res.tg = tg; |
| pipe_ctx->pipe_idx = i; |
| |
| pipe_ctx->plane_res.hubp = hubp; |
| hubp->mpcc_id = i; |
| hubp->opp_id = 0xf; |
| hubp->power_gated = false; |
| |
| dc->res_pool->opps[i]->mpc_tree_params.opp_id = dc->res_pool->opps[i]->inst; |
| dc->res_pool->opps[i]->mpc_tree_params.opp_list = NULL; |
| dc->res_pool->opps[i]->mpcc_disconnect_pending[i] = true; |
| pipe_ctx->stream_res.opp = dc->res_pool->opps[i]; |
| |
| plane_atomic_disconnect(dc, pipe_ctx); |
| } |
| |
| for (i = 0; i < dc->res_pool->pipe_count; i++) { |
| struct timing_generator *tg = dc->res_pool->timing_generators[i]; |
| |
| if (tg->funcs->is_tg_enabled(tg)) |
| tg->funcs->unlock(tg); |
| } |
| |
| for (i = 0; i < dc->res_pool->pipe_count; i++) { |
| struct timing_generator *tg = dc->res_pool->timing_generators[i]; |
| struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i]; |
| |
| dcn10_disable_plane(dc, pipe_ctx); |
| |
| pipe_ctx->stream_res.tg = NULL; |
| pipe_ctx->plane_res.hubp = NULL; |
| |
| tg->funcs->tg_init(tg); |
| } |
| |
| for (i = 0; i < dc->res_pool->audio_count; i++) { |
| struct audio *audio = dc->res_pool->audios[i]; |
| |
| audio->funcs->hw_init(audio); |
| } |
| |
| if (abm != NULL) { |
| abm->funcs->init_backlight(abm); |
| abm->funcs->abm_init(abm); |
| } |
| |
| if (dmcu != NULL) |
| dmcu->funcs->dmcu_init(dmcu); |
| |
| /* power AFMT HDMI memory TODO: may move to dis/en output save power*/ |
| REG_WRITE(DIO_MEM_PWR_CTRL, 0); |
| |
| if (!dc->debug.disable_clock_gate) { |
| /* enable all DCN clock gating */ |
| REG_WRITE(DCCG_GATE_DISABLE_CNTL, 0); |
| |
| REG_WRITE(DCCG_GATE_DISABLE_CNTL2, 0); |
| |
| REG_UPDATE(DCFCLK_CNTL, DCFCLK_GATE_DIS, 0); |
| } |
| |
| enable_power_gating_plane(dc->hwseq, true); |
| } |
| |
| static void reset_hw_ctx_wrap( |
| struct dc *dc, |
| struct dc_state *context) |
| { |
| int i; |
| |
| /* Reset Back End*/ |
| for (i = dc->res_pool->pipe_count - 1; i >= 0 ; i--) { |
| struct pipe_ctx *pipe_ctx_old = |
| &dc->current_state->res_ctx.pipe_ctx[i]; |
| struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i]; |
| |
| if (!pipe_ctx_old->stream) |
| continue; |
| |
| if (pipe_ctx_old->top_pipe) |
| continue; |
| |
| if (!pipe_ctx->stream || |
| pipe_need_reprogram(pipe_ctx_old, pipe_ctx)) { |
| struct clock_source *old_clk = pipe_ctx_old->clock_source; |
| |
| reset_back_end_for_pipe(dc, pipe_ctx_old, dc->current_state); |
| if (old_clk) |
| old_clk->funcs->cs_power_down(old_clk); |
| } |
| } |
| |
| } |
| |
| static bool patch_address_for_sbs_tb_stereo( |
| struct pipe_ctx *pipe_ctx, PHYSICAL_ADDRESS_LOC *addr) |
| { |
| struct dc_plane_state *plane_state = pipe_ctx->plane_state; |
| bool sec_split = pipe_ctx->top_pipe && |
| pipe_ctx->top_pipe->plane_state == pipe_ctx->plane_state; |
| if (sec_split && plane_state->address.type == PLN_ADDR_TYPE_GRPH_STEREO && |
| (pipe_ctx->stream->timing.timing_3d_format == |
| TIMING_3D_FORMAT_SIDE_BY_SIDE || |
| pipe_ctx->stream->timing.timing_3d_format == |
| TIMING_3D_FORMAT_TOP_AND_BOTTOM)) { |
| *addr = plane_state->address.grph_stereo.left_addr; |
| plane_state->address.grph_stereo.left_addr = |
| plane_state->address.grph_stereo.right_addr; |
| return true; |
| } else { |
| if (pipe_ctx->stream->view_format != VIEW_3D_FORMAT_NONE && |
| plane_state->address.type != PLN_ADDR_TYPE_GRPH_STEREO) { |
| plane_state->address.type = PLN_ADDR_TYPE_GRPH_STEREO; |
| plane_state->address.grph_stereo.right_addr = |
| plane_state->address.grph_stereo.left_addr; |
| } |
| } |
| return false; |
| } |
| |
| |
| |
| static void dcn10_update_plane_addr(const struct dc *dc, struct pipe_ctx *pipe_ctx) |
| { |
| bool addr_patched = false; |
| PHYSICAL_ADDRESS_LOC addr; |
| struct dc_plane_state *plane_state = pipe_ctx->plane_state; |
| |
| if (plane_state == NULL) |
| return; |
| addr_patched = patch_address_for_sbs_tb_stereo(pipe_ctx, &addr); |
| pipe_ctx->plane_res.hubp->funcs->hubp_program_surface_flip_and_addr( |
| pipe_ctx->plane_res.hubp, |
| &plane_state->address, |
| plane_state->flip_immediate); |
| plane_state->status.requested_address = plane_state->address; |
| if (addr_patched) |
| pipe_ctx->plane_state->address.grph_stereo.left_addr = addr; |
| } |
| |
| static bool dcn10_set_input_transfer_func(struct pipe_ctx *pipe_ctx, |
| const struct dc_plane_state *plane_state) |
| { |
| struct dpp *dpp_base = pipe_ctx->plane_res.dpp; |
| const struct dc_transfer_func *tf = NULL; |
| bool result = true; |
| |
| if (dpp_base == NULL) |
| return false; |
| |
| if (plane_state->in_transfer_func) |
| tf = plane_state->in_transfer_func; |
| |
| if (plane_state->gamma_correction && dce_use_lut(plane_state)) |
| dpp_base->funcs->dpp_program_input_lut(dpp_base, plane_state->gamma_correction); |
| |
| if (tf == NULL) |
| dpp_base->funcs->dpp_set_degamma(dpp_base, IPP_DEGAMMA_MODE_BYPASS); |
| else if (tf->type == TF_TYPE_PREDEFINED) { |
| switch (tf->tf) { |
| case TRANSFER_FUNCTION_SRGB: |
| dpp_base->funcs->dpp_set_degamma(dpp_base, IPP_DEGAMMA_MODE_HW_sRGB); |
| break; |
| case TRANSFER_FUNCTION_BT709: |
| dpp_base->funcs->dpp_set_degamma(dpp_base, IPP_DEGAMMA_MODE_HW_xvYCC); |
| break; |
| case TRANSFER_FUNCTION_LINEAR: |
| dpp_base->funcs->dpp_set_degamma(dpp_base, IPP_DEGAMMA_MODE_BYPASS); |
| break; |
| case TRANSFER_FUNCTION_PQ: |
| default: |
| result = false; |
| break; |
| } |
| } else if (tf->type == TF_TYPE_BYPASS) { |
| dpp_base->funcs->dpp_set_degamma(dpp_base, IPP_DEGAMMA_MODE_BYPASS); |
| } else { |
| /*TF_TYPE_DISTRIBUTED_POINTS*/ |
| result = false; |
| } |
| |
| return result; |
| } |
| |
| |
| |
| |
| |
| static bool |
| dcn10_set_output_transfer_func(struct pipe_ctx *pipe_ctx, |
| const struct dc_stream_state *stream) |
| { |
| struct dpp *dpp = pipe_ctx->plane_res.dpp; |
| |
| if (dpp == NULL) |
| return false; |
| |
| dpp->regamma_params.hw_points_num = GAMMA_HW_POINTS_NUM; |
| |
| if (stream->out_transfer_func && |
| stream->out_transfer_func->type == TF_TYPE_PREDEFINED && |
| stream->out_transfer_func->tf == TRANSFER_FUNCTION_SRGB) |
| dpp->funcs->dpp_program_regamma_pwl(dpp, NULL, OPP_REGAMMA_SRGB); |
| |
| /* dcn10_translate_regamma_to_hw_format takes 750us, only do it when full |
| * update. |
| */ |
| else if (cm_helper_translate_curve_to_hw_format( |
| stream->out_transfer_func, |
| &dpp->regamma_params, false)) { |
| dpp->funcs->dpp_program_regamma_pwl( |
| dpp, |
| &dpp->regamma_params, OPP_REGAMMA_USER); |
| } else |
| dpp->funcs->dpp_program_regamma_pwl(dpp, NULL, OPP_REGAMMA_BYPASS); |
| |
| return true; |
| } |
| |
| static void dcn10_pipe_control_lock( |
| struct dc *dc, |
| struct pipe_ctx *pipe, |
| bool lock) |
| { |
| struct hubp *hubp = NULL; |
| hubp = dc->res_pool->hubps[pipe->pipe_idx]; |
| /* use TG master update lock to lock everything on the TG |
| * therefore only top pipe need to lock |
| */ |
| if (pipe->top_pipe) |
| return; |
| |
| if (dc->debug.sanity_checks) |
| dcn10_verify_allow_pstate_change_high(dc); |
| |
| if (lock) |
| pipe->stream_res.tg->funcs->lock(pipe->stream_res.tg); |
| else |
| pipe->stream_res.tg->funcs->unlock(pipe->stream_res.tg); |
| |
| if (dc->debug.sanity_checks) |
| dcn10_verify_allow_pstate_change_high(dc); |
| } |
| |
| static bool wait_for_reset_trigger_to_occur( |
| struct dc_context *dc_ctx, |
| struct timing_generator *tg) |
| { |
| bool rc = false; |
| |
| /* To avoid endless loop we wait at most |
| * frames_to_wait_on_triggered_reset frames for the reset to occur. */ |
| const uint32_t frames_to_wait_on_triggered_reset = 10; |
| int i; |
| |
| for (i = 0; i < frames_to_wait_on_triggered_reset; i++) { |
| |
| if (!tg->funcs->is_counter_moving(tg)) { |
| DC_ERROR("TG counter is not moving!\n"); |
| break; |
| } |
| |
| if (tg->funcs->did_triggered_reset_occur(tg)) { |
| rc = true; |
| /* usually occurs at i=1 */ |
| DC_SYNC_INFO("GSL: reset occurred at wait count: %d\n", |
| i); |
| break; |
| } |
| |
| /* Wait for one frame. */ |
| tg->funcs->wait_for_state(tg, CRTC_STATE_VACTIVE); |
| tg->funcs->wait_for_state(tg, CRTC_STATE_VBLANK); |
| } |
| |
| if (false == rc) |
| DC_ERROR("GSL: Timeout on reset trigger!\n"); |
| |
| return rc; |
| } |
| |
| static void dcn10_enable_timing_synchronization( |
| struct dc *dc, |
| int group_index, |
| int group_size, |
| struct pipe_ctx *grouped_pipes[]) |
| { |
| struct dc_context *dc_ctx = dc->ctx; |
| int i; |
| |
| DC_SYNC_INFO("Setting up OTG reset trigger\n"); |
| |
| for (i = 1; i < group_size; i++) |
| grouped_pipes[i]->stream_res.tg->funcs->enable_reset_trigger( |
| grouped_pipes[i]->stream_res.tg, |
| grouped_pipes[0]->stream_res.tg->inst); |
| |
| DC_SYNC_INFO("Waiting for trigger\n"); |
| |
| /* Need to get only check 1 pipe for having reset as all the others are |
| * synchronized. Look at last pipe programmed to reset. |
| */ |
| |
| wait_for_reset_trigger_to_occur(dc_ctx, grouped_pipes[1]->stream_res.tg); |
| for (i = 1; i < group_size; i++) |
| grouped_pipes[i]->stream_res.tg->funcs->disable_reset_trigger( |
| grouped_pipes[i]->stream_res.tg); |
| |
| DC_SYNC_INFO("Sync complete\n"); |
| } |
| |
| static void dcn10_enable_per_frame_crtc_position_reset( |
| struct dc *dc, |
| int group_size, |
| struct pipe_ctx *grouped_pipes[]) |
| { |
| struct dc_context *dc_ctx = dc->ctx; |
| int i; |
| |
| DC_SYNC_INFO("Setting up\n"); |
| for (i = 0; i < group_size; i++) |
| grouped_pipes[i]->stream_res.tg->funcs->enable_crtc_reset( |
| grouped_pipes[i]->stream_res.tg, |
| grouped_pipes[i]->stream->triggered_crtc_reset.event_source->status.primary_otg_inst, |
| &grouped_pipes[i]->stream->triggered_crtc_reset); |
| |
| DC_SYNC_INFO("Waiting for trigger\n"); |
| |
| for (i = 1; i < group_size; i++) |
| wait_for_reset_trigger_to_occur(dc_ctx, grouped_pipes[i]->stream_res.tg); |
| |
| DC_SYNC_INFO("Multi-display sync is complete\n"); |
| } |
| |
| /*static void print_rq_dlg_ttu( |
| struct dc *core_dc, |
| struct pipe_ctx *pipe_ctx) |
| { |
| dm_logger_write(core_dc->ctx->logger, LOG_BANDWIDTH_CALCS, |
| "\n============== DML TTU Output parameters [%d] ==============\n" |
| "qos_level_low_wm: %d, \n" |
| "qos_level_high_wm: %d, \n" |
| "min_ttu_vblank: %d, \n" |
| "qos_level_flip: %d, \n" |
| "refcyc_per_req_delivery_l: %d, \n" |
| "qos_level_fixed_l: %d, \n" |
| "qos_ramp_disable_l: %d, \n" |
| "refcyc_per_req_delivery_pre_l: %d, \n" |
| "refcyc_per_req_delivery_c: %d, \n" |
| "qos_level_fixed_c: %d, \n" |
| "qos_ramp_disable_c: %d, \n" |
| "refcyc_per_req_delivery_pre_c: %d\n" |
| "=============================================================\n", |
| pipe_ctx->pipe_idx, |
| pipe_ctx->ttu_regs.qos_level_low_wm, |
| pipe_ctx->ttu_regs.qos_level_high_wm, |
| pipe_ctx->ttu_regs.min_ttu_vblank, |
| pipe_ctx->ttu_regs.qos_level_flip, |
| pipe_ctx->ttu_regs.refcyc_per_req_delivery_l, |
| pipe_ctx->ttu_regs.qos_level_fixed_l, |
| pipe_ctx->ttu_regs.qos_ramp_disable_l, |
| pipe_ctx->ttu_regs.refcyc_per_req_delivery_pre_l, |
| pipe_ctx->ttu_regs.refcyc_per_req_delivery_c, |
| pipe_ctx->ttu_regs.qos_level_fixed_c, |
| pipe_ctx->ttu_regs.qos_ramp_disable_c, |
| pipe_ctx->ttu_regs.refcyc_per_req_delivery_pre_c |
| ); |
| |
| dm_logger_write(core_dc->ctx->logger, LOG_BANDWIDTH_CALCS, |
| "\n============== DML DLG Output parameters [%d] ==============\n" |
| "refcyc_h_blank_end: %d, \n" |
| "dlg_vblank_end: %d, \n" |
| "min_dst_y_next_start: %d, \n" |
| "refcyc_per_htotal: %d, \n" |
| "refcyc_x_after_scaler: %d, \n" |
| "dst_y_after_scaler: %d, \n" |
| "dst_y_prefetch: %d, \n" |
| "dst_y_per_vm_vblank: %d, \n" |
| "dst_y_per_row_vblank: %d, \n" |
| "ref_freq_to_pix_freq: %d, \n" |
| "vratio_prefetch: %d, \n" |
| "refcyc_per_pte_group_vblank_l: %d, \n" |
| "refcyc_per_meta_chunk_vblank_l: %d, \n" |
| "dst_y_per_pte_row_nom_l: %d, \n" |
| "refcyc_per_pte_group_nom_l: %d, \n", |
| pipe_ctx->pipe_idx, |
| pipe_ctx->dlg_regs.refcyc_h_blank_end, |
| pipe_ctx->dlg_regs.dlg_vblank_end, |
| pipe_ctx->dlg_regs.min_dst_y_next_start, |
| pipe_ctx->dlg_regs.refcyc_per_htotal, |
| pipe_ctx->dlg_regs.refcyc_x_after_scaler, |
| pipe_ctx->dlg_regs.dst_y_after_scaler, |
| pipe_ctx->dlg_regs.dst_y_prefetch, |
| pipe_ctx->dlg_regs.dst_y_per_vm_vblank, |
| pipe_ctx->dlg_regs.dst_y_per_row_vblank, |
| pipe_ctx->dlg_regs.ref_freq_to_pix_freq, |
| pipe_ctx->dlg_regs.vratio_prefetch, |
| pipe_ctx->dlg_regs.refcyc_per_pte_group_vblank_l, |
| pipe_ctx->dlg_regs.refcyc_per_meta_chunk_vblank_l, |
| pipe_ctx->dlg_regs.dst_y_per_pte_row_nom_l, |
| pipe_ctx->dlg_regs.refcyc_per_pte_group_nom_l |
| ); |
| |
| dm_logger_write(core_dc->ctx->logger, LOG_BANDWIDTH_CALCS, |
| "\ndst_y_per_meta_row_nom_l: %d, \n" |
| "refcyc_per_meta_chunk_nom_l: %d, \n" |
| "refcyc_per_line_delivery_pre_l: %d, \n" |
| "refcyc_per_line_delivery_l: %d, \n" |
| "vratio_prefetch_c: %d, \n" |
| "refcyc_per_pte_group_vblank_c: %d, \n" |
| "refcyc_per_meta_chunk_vblank_c: %d, \n" |
| "dst_y_per_pte_row_nom_c: %d, \n" |
| "refcyc_per_pte_group_nom_c: %d, \n" |
| "dst_y_per_meta_row_nom_c: %d, \n" |
| "refcyc_per_meta_chunk_nom_c: %d, \n" |
| "refcyc_per_line_delivery_pre_c: %d, \n" |
| "refcyc_per_line_delivery_c: %d \n" |
| "========================================================\n", |
| pipe_ctx->dlg_regs.dst_y_per_meta_row_nom_l, |
| pipe_ctx->dlg_regs.refcyc_per_meta_chunk_nom_l, |
| pipe_ctx->dlg_regs.refcyc_per_line_delivery_pre_l, |
| pipe_ctx->dlg_regs.refcyc_per_line_delivery_l, |
| pipe_ctx->dlg_regs.vratio_prefetch_c, |
| pipe_ctx->dlg_regs.refcyc_per_pte_group_vblank_c, |
| pipe_ctx->dlg_regs.refcyc_per_meta_chunk_vblank_c, |
| pipe_ctx->dlg_regs.dst_y_per_pte_row_nom_c, |
| pipe_ctx->dlg_regs.refcyc_per_pte_group_nom_c, |
| pipe_ctx->dlg_regs.dst_y_per_meta_row_nom_c, |
| pipe_ctx->dlg_regs.refcyc_per_meta_chunk_nom_c, |
| pipe_ctx->dlg_regs.refcyc_per_line_delivery_pre_c, |
| pipe_ctx->dlg_regs.refcyc_per_line_delivery_c |
| ); |
| |
| dm_logger_write(core_dc->ctx->logger, LOG_BANDWIDTH_CALCS, |
| "\n============== DML RQ Output parameters [%d] ==============\n" |
| "chunk_size: %d \n" |
| "min_chunk_size: %d \n" |
| "meta_chunk_size: %d \n" |
| "min_meta_chunk_size: %d \n" |
| "dpte_group_size: %d \n" |
| "mpte_group_size: %d \n" |
| "swath_height: %d \n" |
| "pte_row_height_linear: %d \n" |
| "========================================================\n", |
| pipe_ctx->pipe_idx, |
| pipe_ctx->rq_regs.rq_regs_l.chunk_size, |
| pipe_ctx->rq_regs.rq_regs_l.min_chunk_size, |
| pipe_ctx->rq_regs.rq_regs_l.meta_chunk_size, |
| pipe_ctx->rq_regs.rq_regs_l.min_meta_chunk_size, |
| pipe_ctx->rq_regs.rq_regs_l.dpte_group_size, |
| pipe_ctx->rq_regs.rq_regs_l.mpte_group_size, |
| pipe_ctx->rq_regs.rq_regs_l.swath_height, |
| pipe_ctx->rq_regs.rq_regs_l.pte_row_height_linear |
| ); |
| } |
| */ |
| |
| static void mmhub_read_vm_system_aperture_settings(struct dcn10_hubp *hubp1, |
| struct vm_system_aperture_param *apt, |
| struct dce_hwseq *hws) |
| { |
| PHYSICAL_ADDRESS_LOC physical_page_number; |
| uint32_t logical_addr_low; |
| uint32_t logical_addr_high; |
| |
| REG_GET(MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR_MSB, |
| PHYSICAL_PAGE_NUMBER_MSB, &physical_page_number.high_part); |
| REG_GET(MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR_LSB, |
| PHYSICAL_PAGE_NUMBER_LSB, &physical_page_number.low_part); |
| |
| REG_GET(MC_VM_SYSTEM_APERTURE_LOW_ADDR, |
| LOGICAL_ADDR, &logical_addr_low); |
| |
| REG_GET(MC_VM_SYSTEM_APERTURE_HIGH_ADDR, |
| LOGICAL_ADDR, &logical_addr_high); |
| |
| apt->sys_default.quad_part = physical_page_number.quad_part << 12; |
| apt->sys_low.quad_part = (int64_t)logical_addr_low << 18; |
| apt->sys_high.quad_part = (int64_t)logical_addr_high << 18; |
| } |
| |
| /* Temporary read settings, future will get values from kmd directly */ |
| static void mmhub_read_vm_context0_settings(struct dcn10_hubp *hubp1, |
| struct vm_context0_param *vm0, |
| struct dce_hwseq *hws) |
| { |
| PHYSICAL_ADDRESS_LOC fb_base; |
| PHYSICAL_ADDRESS_LOC fb_offset; |
| uint32_t fb_base_value; |
| uint32_t fb_offset_value; |
| |
| REG_GET(DCHUBBUB_SDPIF_FB_BASE, SDPIF_FB_BASE, &fb_base_value); |
| REG_GET(DCHUBBUB_SDPIF_FB_OFFSET, SDPIF_FB_OFFSET, &fb_offset_value); |
| |
| REG_GET(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR_HI32, |
| PAGE_DIRECTORY_ENTRY_HI32, &vm0->pte_base.high_part); |
| REG_GET(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR_LO32, |
| PAGE_DIRECTORY_ENTRY_LO32, &vm0->pte_base.low_part); |
| |
| REG_GET(VM_CONTEXT0_PAGE_TABLE_START_ADDR_HI32, |
| LOGICAL_PAGE_NUMBER_HI4, &vm0->pte_start.high_part); |
| REG_GET(VM_CONTEXT0_PAGE_TABLE_START_ADDR_LO32, |
| LOGICAL_PAGE_NUMBER_LO32, &vm0->pte_start.low_part); |
| |
| REG_GET(VM_CONTEXT0_PAGE_TABLE_END_ADDR_HI32, |
| LOGICAL_PAGE_NUMBER_HI4, &vm0->pte_end.high_part); |
| REG_GET(VM_CONTEXT0_PAGE_TABLE_END_ADDR_LO32, |
| LOGICAL_PAGE_NUMBER_LO32, &vm0->pte_end.low_part); |
| |
| REG_GET(VM_L2_PROTECTION_FAULT_DEFAULT_ADDR_HI32, |
| PHYSICAL_PAGE_ADDR_HI4, &vm0->fault_default.high_part); |
| REG_GET(VM_L2_PROTECTION_FAULT_DEFAULT_ADDR_LO32, |
| PHYSICAL_PAGE_ADDR_LO32, &vm0->fault_default.low_part); |
| |
| /* |
| * The values in VM_CONTEXT0_PAGE_TABLE_BASE_ADDR is in UMA space. |
| * Therefore we need to do |
| * DCN_VM_CONTEXT0_PAGE_TABLE_BASE_ADDR = VM_CONTEXT0_PAGE_TABLE_BASE_ADDR |
| * - DCHUBBUB_SDPIF_FB_OFFSET + DCHUBBUB_SDPIF_FB_BASE |
| */ |
| fb_base.quad_part = (uint64_t)fb_base_value << 24; |
| fb_offset.quad_part = (uint64_t)fb_offset_value << 24; |
| vm0->pte_base.quad_part += fb_base.quad_part; |
| vm0->pte_base.quad_part -= fb_offset.quad_part; |
| } |
| |
| |
| static void dcn10_program_pte_vm(struct dce_hwseq *hws, struct hubp *hubp) |
| { |
| struct dcn10_hubp *hubp1 = TO_DCN10_HUBP(hubp); |
| struct vm_system_aperture_param apt = { {{ 0 } } }; |
| struct vm_context0_param vm0 = { { { 0 } } }; |
| |
| mmhub_read_vm_system_aperture_settings(hubp1, &apt, hws); |
| mmhub_read_vm_context0_settings(hubp1, &vm0, hws); |
| |
| hubp->funcs->hubp_set_vm_system_aperture_settings(hubp, &apt); |
| hubp->funcs->hubp_set_vm_context0_settings(hubp, &vm0); |
| } |
| |
| static void dcn10_enable_plane( |
| struct dc *dc, |
| struct pipe_ctx *pipe_ctx, |
| struct dc_state *context) |
| { |
| struct dce_hwseq *hws = dc->hwseq; |
| |
| if (dc->debug.sanity_checks) { |
| dcn10_verify_allow_pstate_change_high(dc); |
| } |
| |
| undo_DEGVIDCN10_253_wa(dc); |
| |
| power_on_plane(dc->hwseq, |
| pipe_ctx->pipe_idx); |
| |
| /* enable DCFCLK current DCHUB */ |
| REG_UPDATE(HUBP_CLK_CNTL[pipe_ctx->pipe_idx], |
| HUBP_CLOCK_ENABLE, 1); |
| |
| /* make sure OPP_PIPE_CLOCK_EN = 1 */ |
| REG_UPDATE(OPP_PIPE_CONTROL[pipe_ctx->stream_res.tg->inst], |
| OPP_PIPE_CLOCK_EN, 1); |
| |
| /* TODO: enable/disable in dm as per update type. |
| if (plane_state) { |
| dm_logger_write(dc->ctx->logger, LOG_DC, |
| "Pipe:%d 0x%x: addr hi:0x%x, " |
| "addr low:0x%x, " |
| "src: %d, %d, %d," |
| " %d; dst: %d, %d, %d, %d;\n", |
| pipe_ctx->pipe_idx, |
| plane_state, |
| plane_state->address.grph.addr.high_part, |
| plane_state->address.grph.addr.low_part, |
| plane_state->src_rect.x, |
| plane_state->src_rect.y, |
| plane_state->src_rect.width, |
| plane_state->src_rect.height, |
| plane_state->dst_rect.x, |
| plane_state->dst_rect.y, |
| plane_state->dst_rect.width, |
| plane_state->dst_rect.height); |
| |
| dm_logger_write(dc->ctx->logger, LOG_DC, |
| "Pipe %d: width, height, x, y format:%d\n" |
| "viewport:%d, %d, %d, %d\n" |
| "recout: %d, %d, %d, %d\n", |
| pipe_ctx->pipe_idx, |
| plane_state->format, |
| pipe_ctx->plane_res.scl_data.viewport.width, |
| pipe_ctx->plane_res.scl_data.viewport.height, |
| pipe_ctx->plane_res.scl_data.viewport.x, |
| pipe_ctx->plane_res.scl_data.viewport.y, |
| pipe_ctx->plane_res.scl_data.recout.width, |
| pipe_ctx->plane_res.scl_data.recout.height, |
| pipe_ctx->plane_res.scl_data.recout.x, |
| pipe_ctx->plane_res.scl_data.recout.y); |
| print_rq_dlg_ttu(dc, pipe_ctx); |
| } |
| */ |
| if (dc->config.gpu_vm_support) |
| dcn10_program_pte_vm(hws, pipe_ctx->plane_res.hubp); |
| |
| if (dc->debug.sanity_checks) { |
| dcn10_verify_allow_pstate_change_high(dc); |
| } |
| } |
| |
| static void program_gamut_remap(struct pipe_ctx *pipe_ctx) |
| { |
| struct dpp_grph_csc_adjustment adjust; |
| memset(&adjust, 0, sizeof(adjust)); |
| adjust.gamut_adjust_type = GRAPHICS_GAMUT_ADJUST_TYPE_BYPASS; |
| |
| |
| if (pipe_ctx->stream->gamut_remap_matrix.enable_remap == true) { |
| adjust.gamut_adjust_type = GRAPHICS_GAMUT_ADJUST_TYPE_SW; |
| adjust.temperature_matrix[0] = |
| pipe_ctx->stream-> |
| gamut_remap_matrix.matrix[0]; |
| adjust.temperature_matrix[1] = |
| pipe_ctx->stream-> |
| gamut_remap_matrix.matrix[1]; |
| adjust.temperature_matrix[2] = |
| pipe_ctx->stream-> |
| gamut_remap_matrix.matrix[2]; |
| adjust.temperature_matrix[3] = |
| pipe_ctx->stream-> |
| gamut_remap_matrix.matrix[4]; |
| adjust.temperature_matrix[4] = |
| pipe_ctx->stream-> |
| gamut_remap_matrix.matrix[5]; |
| adjust.temperature_matrix[5] = |
| pipe_ctx->stream-> |
| gamut_remap_matrix.matrix[6]; |
| adjust.temperature_matrix[6] = |
| pipe_ctx->stream-> |
| gamut_remap_matrix.matrix[8]; |
| adjust.temperature_matrix[7] = |
| pipe_ctx->stream-> |
| gamut_remap_matrix.matrix[9]; |
| adjust.temperature_matrix[8] = |
| pipe_ctx->stream-> |
| gamut_remap_matrix.matrix[10]; |
| } |
| |
| pipe_ctx->plane_res.dpp->funcs->dpp_set_gamut_remap(pipe_ctx->plane_res.dpp, &adjust); |
| } |
| |
| |
| static void program_csc_matrix(struct pipe_ctx *pipe_ctx, |
| enum dc_color_space colorspace, |
| uint16_t *matrix) |
| { |
| if (pipe_ctx->stream->csc_color_matrix.enable_adjustment == true) { |
| if (pipe_ctx->plane_res.dpp->funcs->dpp_set_csc_adjustment != NULL) |
| pipe_ctx->plane_res.dpp->funcs->dpp_set_csc_adjustment(pipe_ctx->plane_res.dpp, matrix); |
| } else { |
| if (pipe_ctx->plane_res.dpp->funcs->dpp_set_csc_default != NULL) |
| pipe_ctx->plane_res.dpp->funcs->dpp_set_csc_default(pipe_ctx->plane_res.dpp, colorspace); |
| } |
| } |
| |
| static void program_output_csc(struct dc *dc, |
| struct pipe_ctx *pipe_ctx, |
| enum dc_color_space colorspace, |
| uint16_t *matrix, |
| int opp_id) |
| { |
| if (pipe_ctx->plane_res.dpp->funcs->dpp_set_csc_adjustment != NULL) |
| program_csc_matrix(pipe_ctx, |
| colorspace, |
| matrix); |
| } |
| |
| static bool is_lower_pipe_tree_visible(struct pipe_ctx *pipe_ctx) |
| { |
| if (pipe_ctx->plane_state->visible) |
| return true; |
| if (pipe_ctx->bottom_pipe && is_lower_pipe_tree_visible(pipe_ctx->bottom_pipe)) |
| return true; |
| return false; |
| } |
| |
| static bool is_upper_pipe_tree_visible(struct pipe_ctx *pipe_ctx) |
| { |
| if (pipe_ctx->plane_state->visible) |
| return true; |
| if (pipe_ctx->top_pipe && is_upper_pipe_tree_visible(pipe_ctx->top_pipe)) |
| return true; |
| return false; |
| } |
| |
| static bool is_pipe_tree_visible(struct pipe_ctx *pipe_ctx) |
| { |
| if (pipe_ctx->plane_state->visible) |
| return true; |
| if (pipe_ctx->top_pipe && is_upper_pipe_tree_visible(pipe_ctx->top_pipe)) |
| return true; |
| if (pipe_ctx->bottom_pipe && is_lower_pipe_tree_visible(pipe_ctx->bottom_pipe)) |
| return true; |
| return false; |
| } |
| |
| static bool is_rgb_cspace(enum dc_color_space output_color_space) |
| { |
| switch (output_color_space) { |
| case COLOR_SPACE_SRGB: |
| case COLOR_SPACE_SRGB_LIMITED: |
| case COLOR_SPACE_2020_RGB_FULLRANGE: |
| case COLOR_SPACE_2020_RGB_LIMITEDRANGE: |
| case COLOR_SPACE_ADOBERGB: |
| return true; |
| case COLOR_SPACE_YCBCR601: |
| case COLOR_SPACE_YCBCR709: |
| case COLOR_SPACE_YCBCR601_LIMITED: |
| case COLOR_SPACE_YCBCR709_LIMITED: |
| case COLOR_SPACE_2020_YCBCR: |
| return false; |
| default: |
| /* Add a case to switch */ |
| BREAK_TO_DEBUGGER(); |
| return false; |
| } |
| } |
| |
| static void dcn10_get_surface_visual_confirm_color( |
| const struct pipe_ctx *pipe_ctx, |
| struct tg_color *color) |
| { |
| uint32_t color_value = MAX_TG_COLOR_VALUE; |
| |
| switch (pipe_ctx->plane_res.scl_data.format) { |
| case PIXEL_FORMAT_ARGB8888: |
| /* set boarder color to red */ |
| color->color_r_cr = color_value; |
| break; |
| |
| case PIXEL_FORMAT_ARGB2101010: |
| /* set boarder color to blue */ |
| color->color_b_cb = color_value; |
| break; |
| case PIXEL_FORMAT_420BPP8: |
| /* set boarder color to green */ |
| color->color_g_y = color_value; |
| break; |
| case PIXEL_FORMAT_420BPP10: |
| /* set boarder color to yellow */ |
| color->color_g_y = color_value; |
| color->color_r_cr = color_value; |
| break; |
| case PIXEL_FORMAT_FP16: |
| /* set boarder color to white */ |
| color->color_r_cr = color_value; |
| color->color_b_cb = color_value; |
| color->color_g_y = color_value; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static uint16_t fixed_point_to_int_frac( |
| struct fixed31_32 arg, |
| uint8_t integer_bits, |
| uint8_t fractional_bits) |
| { |
| int32_t numerator; |
| int32_t divisor = 1 << fractional_bits; |
| |
| uint16_t result; |
| |
| uint16_t d = (uint16_t)dal_fixed31_32_floor( |
| dal_fixed31_32_abs( |
| arg)); |
| |
| if (d <= (uint16_t)(1 << integer_bits) - (1 / (uint16_t)divisor)) |
| numerator = (uint16_t)dal_fixed31_32_floor( |
| dal_fixed31_32_mul_int( |
| arg, |
| divisor)); |
| else { |
| numerator = dal_fixed31_32_floor( |
| dal_fixed31_32_sub( |
| dal_fixed31_32_from_int( |
| 1LL << integer_bits), |
| dal_fixed31_32_recip( |
| dal_fixed31_32_from_int( |
| divisor)))); |
| } |
| |
| if (numerator >= 0) |
| result = (uint16_t)numerator; |
| else |
| result = (uint16_t)( |
| (1 << (integer_bits + fractional_bits + 1)) + numerator); |
| |
| if ((result != 0) && dal_fixed31_32_lt( |
| arg, dal_fixed31_32_zero)) |
| result |= 1 << (integer_bits + fractional_bits); |
| |
| return result; |
| } |
| |
| void build_prescale_params(struct dc_bias_and_scale *bias_and_scale, |
| const struct dc_plane_state *plane_state) |
| { |
| if (plane_state->format >= SURFACE_PIXEL_FORMAT_VIDEO_BEGIN |
| && plane_state->format != SURFACE_PIXEL_FORMAT_INVALID |
| && plane_state->input_csc_color_matrix.enable_adjustment |
| && plane_state->coeff_reduction_factor.value != 0) { |
| bias_and_scale->scale_blue = fixed_point_to_int_frac( |
| dal_fixed31_32_mul(plane_state->coeff_reduction_factor, |
| dal_fixed31_32_from_fraction(256, 255)), |
| 2, |
| 13); |
| bias_and_scale->scale_red = bias_and_scale->scale_blue; |
| bias_and_scale->scale_green = bias_and_scale->scale_blue; |
| } else { |
| bias_and_scale->scale_blue = 0x2000; |
| bias_and_scale->scale_red = 0x2000; |
| bias_and_scale->scale_green = 0x2000; |
| } |
| } |
| |
| static void update_dpp(struct dpp *dpp, struct dc_plane_state *plane_state) |
| { |
| struct dc_bias_and_scale bns_params = {0}; |
| |
| // program the input csc |
| dpp->funcs->dpp_setup(dpp, |
| plane_state->format, |
| EXPANSION_MODE_ZERO, |
| plane_state->input_csc_color_matrix, |
| COLOR_SPACE_YCBCR601_LIMITED); |
| |
| //set scale and bias registers |
| build_prescale_params(&bns_params, plane_state); |
| if (dpp->funcs->dpp_program_bias_and_scale) |
| dpp->funcs->dpp_program_bias_and_scale(dpp, &bns_params); |
| } |
| |
| static void update_mpcc(struct dc *dc, struct pipe_ctx *pipe_ctx) |
| { |
| struct hubp *hubp = pipe_ctx->plane_res.hubp; |
| struct mpcc_blnd_cfg blnd_cfg; |
| bool per_pixel_alpha = pipe_ctx->plane_state->per_pixel_alpha && pipe_ctx->bottom_pipe; |
| int mpcc_id; |
| struct mpcc *new_mpcc; |
| struct mpc *mpc = dc->res_pool->mpc; |
| struct mpc_tree *mpc_tree_params = &(pipe_ctx->stream_res.opp->mpc_tree_params); |
| |
| /* TODO: proper fix once fpga works */ |
| |
| if (dc->debug.surface_visual_confirm) |
| dcn10_get_surface_visual_confirm_color( |
| pipe_ctx, &blnd_cfg.black_color); |
| else |
| color_space_to_black_color( |
| dc, pipe_ctx->stream->output_color_space, |
| &blnd_cfg.black_color); |
| |
| if (per_pixel_alpha) |
| blnd_cfg.alpha_mode = MPCC_ALPHA_BLEND_MODE_PER_PIXEL_ALPHA; |
| else |
| blnd_cfg.alpha_mode = MPCC_ALPHA_BLEND_MODE_GLOBAL_ALPHA; |
| |
| blnd_cfg.overlap_only = false; |
| blnd_cfg.global_alpha = 0xff; |
| blnd_cfg.global_gain = 0xff; |
| |
| /* DCN1.0 has output CM before MPC which seems to screw with |
| * pre-multiplied alpha. |
| */ |
| blnd_cfg.pre_multiplied_alpha = is_rgb_cspace( |
| pipe_ctx->stream->output_color_space) |
| && per_pixel_alpha; |
| |
| /* |
| * TODO: remove hack |
| * Note: currently there is a bug in init_hw such that |
| * on resume from hibernate, BIOS sets up MPCC0, and |
| * we do mpcc_remove but the mpcc cannot go to idle |
| * after remove. This cause us to pick mpcc1 here, |
| * which causes a pstate hang for yet unknown reason. |
| */ |
| mpcc_id = hubp->inst; |
| |
| /* check if this MPCC is already being used */ |
| new_mpcc = mpc->funcs->get_mpcc_for_dpp(mpc_tree_params, mpcc_id); |
| /* remove MPCC if being used */ |
| if (new_mpcc != NULL) |
| mpc->funcs->remove_mpcc(mpc, mpc_tree_params, new_mpcc); |
| else |
| if (dc->debug.sanity_checks) |
| mpc->funcs->assert_mpcc_idle_before_connect( |
| dc->res_pool->mpc, mpcc_id); |
| |
| /* Call MPC to insert new plane */ |
| new_mpcc = mpc->funcs->insert_plane(dc->res_pool->mpc, |
| mpc_tree_params, |
| &blnd_cfg, |
| NULL, |
| NULL, |
| hubp->inst, |
| mpcc_id); |
| |
| ASSERT(new_mpcc != NULL); |
| |
| hubp->opp_id = pipe_ctx->stream_res.opp->inst; |
| hubp->mpcc_id = mpcc_id; |
| } |
| |
| static void update_scaler(struct pipe_ctx *pipe_ctx) |
| { |
| bool per_pixel_alpha = |
| pipe_ctx->plane_state->per_pixel_alpha && pipe_ctx->bottom_pipe; |
| |
| /* TODO: proper fix once fpga works */ |
| |
| pipe_ctx->plane_res.scl_data.lb_params.alpha_en = per_pixel_alpha; |
| pipe_ctx->plane_res.scl_data.lb_params.depth = LB_PIXEL_DEPTH_30BPP; |
| /* scaler configuration */ |
| pipe_ctx->plane_res.dpp->funcs->dpp_set_scaler( |
| pipe_ctx->plane_res.dpp, &pipe_ctx->plane_res.scl_data); |
| } |
| |
| static void update_dchubp_dpp( |
| struct dc *dc, |
| struct pipe_ctx *pipe_ctx, |
| struct dc_state *context) |
| { |
| struct dce_hwseq *hws = dc->hwseq; |
| struct hubp *hubp = pipe_ctx->plane_res.hubp; |
| struct dpp *dpp = pipe_ctx->plane_res.dpp; |
| struct dc_plane_state *plane_state = pipe_ctx->plane_state; |
| union plane_size size = plane_state->plane_size; |
| |
| /* depends on DML calculation, DPP clock value may change dynamically */ |
| if (plane_state->update_flags.bits.full_update) { |
| enable_dppclk( |
| dc->hwseq, |
| pipe_ctx->pipe_idx, |
| pipe_ctx->stream_res.pix_clk_params.requested_pix_clk, |
| context->bw.dcn.calc_clk.dppclk_div); |
| dc->current_state->bw.dcn.cur_clk.dppclk_div = |
| context->bw.dcn.calc_clk.dppclk_div; |
| context->bw.dcn.cur_clk.dppclk_div = context->bw.dcn.calc_clk.dppclk_div; |
| } |
| |
| /* TODO: Need input parameter to tell current DCHUB pipe tie to which OTG |
| * VTG is within DCHUBBUB which is commond block share by each pipe HUBP. |
| * VTG is 1:1 mapping with OTG. Each pipe HUBP will select which VTG |
| */ |
| if (plane_state->update_flags.bits.full_update) { |
| REG_UPDATE(DCHUBP_CNTL[pipe_ctx->pipe_idx], HUBP_VTG_SEL, pipe_ctx->stream_res.tg->inst); |
| |
| hubp->funcs->hubp_setup( |
| hubp, |
| &pipe_ctx->dlg_regs, |
| &pipe_ctx->ttu_regs, |
| &pipe_ctx->rq_regs, |
| &pipe_ctx->pipe_dlg_param); |
| } |
| |
| size.grph.surface_size = pipe_ctx->plane_res.scl_data.viewport; |
| |
| if (plane_state->update_flags.bits.full_update || |
| plane_state->update_flags.bits.bpp_change) |
| update_dpp(dpp, plane_state); |
| |
| if (plane_state->update_flags.bits.full_update || |
| plane_state->update_flags.bits.per_pixel_alpha_change) |
| update_mpcc(dc, pipe_ctx); |
| |
| if (plane_state->update_flags.bits.full_update || |
| plane_state->update_flags.bits.per_pixel_alpha_change || |
| plane_state->update_flags.bits.scaling_change || |
| plane_state->update_flags.bits.position_change) { |
| update_scaler(pipe_ctx); |
| } |
| |
| if (plane_state->update_flags.bits.full_update || |
| plane_state->update_flags.bits.scaling_change || |
| plane_state->update_flags.bits.position_change) { |
| hubp->funcs->mem_program_viewport( |
| hubp, |
| &pipe_ctx->plane_res.scl_data.viewport, |
| &pipe_ctx->plane_res.scl_data.viewport_c); |
| } |
| |
| if (pipe_ctx->stream->cursor_attributes.address.quad_part != 0) { |
| dc->hwss.set_cursor_position(pipe_ctx); |
| dc->hwss.set_cursor_attribute(pipe_ctx); |
| } |
| |
| if (plane_state->update_flags.bits.full_update) { |
| /*gamut remap*/ |
| program_gamut_remap(pipe_ctx); |
| |
| program_output_csc(dc, |
| pipe_ctx, |
| pipe_ctx->stream->output_color_space, |
| pipe_ctx->stream->csc_color_matrix.matrix, |
| hubp->opp_id); |
| } |
| |
| if (plane_state->update_flags.bits.full_update || |
| plane_state->update_flags.bits.horizontal_mirror_change || |
| plane_state->update_flags.bits.rotation_change || |
| plane_state->update_flags.bits.swizzle_change || |
| plane_state->update_flags.bits.dcc_change || |
| plane_state->update_flags.bits.bpp_change || |
| plane_state->update_flags.bits.scaling_change) { |
| hubp->funcs->hubp_program_surface_config( |
| hubp, |
| plane_state->format, |
| &plane_state->tiling_info, |
| &size, |
| plane_state->rotation, |
| &plane_state->dcc, |
| plane_state->horizontal_mirror); |
| } |
| |
| hubp->power_gated = false; |
| |
| dc->hwss.update_plane_addr(dc, pipe_ctx); |
| |
| if (is_pipe_tree_visible(pipe_ctx)) |
| hubp->funcs->set_blank(hubp, false); |
| } |
| |
| |
| static void program_all_pipe_in_tree( |
| struct dc *dc, |
| struct pipe_ctx *pipe_ctx, |
| struct dc_state *context) |
| { |
| |
| if (pipe_ctx->top_pipe == NULL) { |
| |
| pipe_ctx->stream_res.tg->dlg_otg_param.vready_offset = pipe_ctx->pipe_dlg_param.vready_offset; |
| pipe_ctx->stream_res.tg->dlg_otg_param.vstartup_start = pipe_ctx->pipe_dlg_param.vstartup_start; |
| pipe_ctx->stream_res.tg->dlg_otg_param.vupdate_offset = pipe_ctx->pipe_dlg_param.vupdate_offset; |
| pipe_ctx->stream_res.tg->dlg_otg_param.vupdate_width = pipe_ctx->pipe_dlg_param.vupdate_width; |
| pipe_ctx->stream_res.tg->dlg_otg_param.signal = pipe_ctx->stream->signal; |
| |
| pipe_ctx->stream_res.tg->funcs->program_global_sync( |
| pipe_ctx->stream_res.tg); |
| |
| if (pipe_ctx->stream_res.tg->funcs->set_blank) |
| pipe_ctx->stream_res.tg->funcs->set_blank( |
| pipe_ctx->stream_res.tg, |
| !is_pipe_tree_visible(pipe_ctx)); |
| } |
| |
| if (pipe_ctx->plane_state != NULL) { |
| struct pipe_ctx *cur_pipe_ctx = |
| &dc->current_state->res_ctx.pipe_ctx[pipe_ctx->pipe_idx]; |
| |
| if (pipe_ctx->plane_state->update_flags.bits.full_update) |
| dcn10_enable_plane(dc, pipe_ctx, context); |
| |
| update_dchubp_dpp(dc, pipe_ctx, context); |
| |
| if (cur_pipe_ctx->plane_state != pipe_ctx->plane_state) |
| dc->hwss.set_input_transfer_func(pipe_ctx, pipe_ctx->plane_state); |
| |
| /* dcn10_translate_regamma_to_hw_format takes 750us to finish |
| * only do gamma programming for full update. |
| * TODO: This can be further optimized/cleaned up |
| * Always call this for now since it does memcmp inside before |
| * doing heavy calculation and programming |
| */ |
| if (pipe_ctx->plane_state->update_flags.bits.full_update) |
| dc->hwss.set_output_transfer_func(pipe_ctx, pipe_ctx->stream); |
| } |
| |
| if (pipe_ctx->bottom_pipe != NULL && pipe_ctx->bottom_pipe != pipe_ctx) |
| program_all_pipe_in_tree(dc, pipe_ctx->bottom_pipe, context); |
| } |
| |
| static void dcn10_pplib_apply_display_requirements( |
| struct dc *dc, |
| struct dc_state *context) |
| { |
| struct dm_pp_display_configuration *pp_display_cfg = &context->pp_display_cfg; |
| |
| pp_display_cfg->all_displays_in_sync = false;/*todo*/ |
| pp_display_cfg->nb_pstate_switch_disable = false; |
| pp_display_cfg->min_engine_clock_khz = context->bw.dcn.cur_clk.dcfclk_khz; |
| pp_display_cfg->min_memory_clock_khz = context->bw.dcn.cur_clk.fclk_khz; |
| pp_display_cfg->min_engine_clock_deep_sleep_khz = context->bw.dcn.cur_clk.dcfclk_deep_sleep_khz; |
| pp_display_cfg->min_dcfc_deep_sleep_clock_khz = context->bw.dcn.cur_clk.dcfclk_deep_sleep_khz; |
| pp_display_cfg->avail_mclk_switch_time_us = |
| context->bw.dcn.cur_clk.dram_ccm_us > 0 ? context->bw.dcn.cur_clk.dram_ccm_us : 0; |
| pp_display_cfg->avail_mclk_switch_time_in_disp_active_us = |
| context->bw.dcn.cur_clk.min_active_dram_ccm_us > 0 ? context->bw.dcn.cur_clk.min_active_dram_ccm_us : 0; |
| pp_display_cfg->min_dcfclock_khz = context->bw.dcn.cur_clk.dcfclk_khz; |
| pp_display_cfg->disp_clk_khz = context->bw.dcn.cur_clk.dispclk_khz; |
| dce110_fill_display_configs(context, pp_display_cfg); |
| |
| if (memcmp(&dc->prev_display_config, pp_display_cfg, sizeof( |
| struct dm_pp_display_configuration)) != 0) |
| dm_pp_apply_display_requirements(dc->ctx, pp_display_cfg); |
| |
| dc->prev_display_config = *pp_display_cfg; |
| } |
| |
| static void optimize_shared_resources(struct dc *dc) |
| { |
| if (dc->current_state->stream_count == 0) { |
| /* S0i2 message */ |
| dcn10_pplib_apply_display_requirements(dc, dc->current_state); |
| } |
| |
| if (dc->debug.pplib_wm_report_mode == WM_REPORT_OVERRIDE) |
| dcn_bw_notify_pplib_of_wm_ranges(dc); |
| } |
| |
| static void ready_shared_resources(struct dc *dc, struct dc_state *context) |
| { |
| /* S0i2 message */ |
| if (dc->current_state->stream_count == 0 && |
| context->stream_count != 0) |
| dcn10_pplib_apply_display_requirements(dc, context); |
| } |
| |
| static struct pipe_ctx *find_top_pipe_for_stream( |
| struct dc *dc, |
| struct dc_state *context, |
| const struct dc_stream_state *stream) |
| { |
| int i; |
| |
| for (i = 0; i < dc->res_pool->pipe_count; i++) { |
| struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i]; |
| struct pipe_ctx *old_pipe_ctx = |
| &dc->current_state->res_ctx.pipe_ctx[i]; |
| |
| if (!pipe_ctx->plane_state && !old_pipe_ctx->plane_state) |
| continue; |
| |
| if (pipe_ctx->stream != stream) |
| continue; |
| |
| if (!pipe_ctx->top_pipe) |
| return pipe_ctx; |
| } |
| return NULL; |
| } |
| |
| static void dcn10_apply_ctx_for_surface( |
| struct dc *dc, |
| const struct dc_stream_state *stream, |
| int num_planes, |
| struct dc_state *context) |
| { |
| int i; |
| struct timing_generator *tg; |
| struct output_pixel_processor *opp; |
| bool removed_pipe[4] = { false }; |
| unsigned int ref_clk_mhz = dc->res_pool->ref_clock_inKhz/1000; |
| bool program_water_mark = false; |
| |
| struct pipe_ctx *top_pipe_to_program = |
| find_top_pipe_for_stream(dc, context, stream); |
| |
| if (!top_pipe_to_program) |
| return; |
| |
| opp = top_pipe_to_program->stream_res.opp; |
| |
| tg = top_pipe_to_program->stream_res.tg; |
| |
| tg->funcs->lock(tg); |
| |
| if (num_planes == 0) { |
| |
| /* OTG blank before remove all front end */ |
| if (tg->funcs->set_blank) |
| tg->funcs->set_blank(tg, true); |
| } |
| |
| /* Disconnect unused mpcc */ |
| for (i = 0; i < dc->res_pool->pipe_count; i++) { |
| struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i]; |
| struct pipe_ctx *old_pipe_ctx = |
| &dc->current_state->res_ctx.pipe_ctx[i]; |
| /* |
| * Powergate reused pipes that are not powergated |
| * fairly hacky right now, using opp_id as indicator |
| * TODO: After move dc_post to dc_update, this will |
| * be removed. |
| */ |
| if (pipe_ctx->plane_state && !old_pipe_ctx->plane_state) { |
| if (old_pipe_ctx->stream_res.tg == tg && |
| old_pipe_ctx->plane_res.hubp && |
| old_pipe_ctx->plane_res.hubp->opp_id != 0xf) { |
| dcn10_disable_plane(dc, pipe_ctx); |
| /* |
| * power down fe will unlock when calling reset, need |
| * to lock it back here. Messy, need rework. |
| */ |
| pipe_ctx->stream_res.tg->funcs->lock(pipe_ctx->stream_res.tg); |
| } |
| } |
| |
| if (!pipe_ctx->plane_state && |
| old_pipe_ctx->plane_state && |
| old_pipe_ctx->stream_res.tg == tg) { |
| |
| plane_atomic_disconnect(dc, old_pipe_ctx); |
| removed_pipe[i] = true; |
| |
| dm_logger_write(dc->ctx->logger, LOG_DC, |
| "Reset mpcc for pipe %d\n", |
| old_pipe_ctx->pipe_idx); |
| } |
| } |
| |
| if (num_planes > 0) |
| program_all_pipe_in_tree(dc, top_pipe_to_program, context); |
| |
| tg->funcs->unlock(tg); |
| |
| if (num_planes == 0) |
| false_optc_underflow_wa(dc, stream, tg); |
| |
| for (i = 0; i < dc->res_pool->pipe_count; i++) { |
| struct pipe_ctx *old_pipe_ctx = |
| &dc->current_state->res_ctx.pipe_ctx[i]; |
| struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i]; |
| |
| if (pipe_ctx->stream == stream && |
| pipe_ctx->plane_state && |
| pipe_ctx->plane_state->update_flags.bits.full_update) |
| program_water_mark = true; |
| |
| if (removed_pipe[i]) |
| dcn10_disable_plane(dc, old_pipe_ctx); |
| } |
| |
| if (program_water_mark) { |
| if (dc->debug.sanity_checks) { |
| /* pstate stuck check after watermark update */ |
| dcn10_verify_allow_pstate_change_high(dc); |
| } |
| |
| /* watermark is for all pipes */ |
| hubbub1_program_watermarks(dc->res_pool->hubbub, |
| &context->bw.dcn.watermarks, ref_clk_mhz); |
| |
| if (dc->debug.sanity_checks) { |
| /* pstate stuck check after watermark update */ |
| dcn10_verify_allow_pstate_change_high(dc); |
| } |
| } |
| /* dm_logger_write(dc->ctx->logger, LOG_BANDWIDTH_CALCS, |
| "\n============== Watermark parameters ==============\n" |
| "a.urgent_ns: %d \n" |
| "a.cstate_enter_plus_exit: %d \n" |
| "a.cstate_exit: %d \n" |
| "a.pstate_change: %d \n" |
| "a.pte_meta_urgent: %d \n" |
| "b.urgent_ns: %d \n" |
| "b.cstate_enter_plus_exit: %d \n" |
| "b.cstate_exit: %d \n" |
| "b.pstate_change: %d \n" |
| "b.pte_meta_urgent: %d \n", |
| context->bw.dcn.watermarks.a.urgent_ns, |
| context->bw.dcn.watermarks.a.cstate_pstate.cstate_enter_plus_exit_ns, |
| context->bw.dcn.watermarks.a.cstate_pstate.cstate_exit_ns, |
| context->bw.dcn.watermarks.a.cstate_pstate.pstate_change_ns, |
| context->bw.dcn.watermarks.a.pte_meta_urgent_ns, |
| context->bw.dcn.watermarks.b.urgent_ns, |
| context->bw.dcn.watermarks.b.cstate_pstate.cstate_enter_plus_exit_ns, |
| context->bw.dcn.watermarks.b.cstate_pstate.cstate_exit_ns, |
| context->bw.dcn.watermarks.b.cstate_pstate.pstate_change_ns, |
| context->bw.dcn.watermarks.b.pte_meta_urgent_ns |
| ); |
| dm_logger_write(dc->ctx->logger, LOG_BANDWIDTH_CALCS, |
| "\nc.urgent_ns: %d \n" |
| "c.cstate_enter_plus_exit: %d \n" |
| "c.cstate_exit: %d \n" |
| "c.pstate_change: %d \n" |
| "c.pte_meta_urgent: %d \n" |
| "d.urgent_ns: %d \n" |
| "d.cstate_enter_plus_exit: %d \n" |
| "d.cstate_exit: %d \n" |
| "d.pstate_change: %d \n" |
| "d.pte_meta_urgent: %d \n" |
| "========================================================\n", |
| context->bw.dcn.watermarks.c.urgent_ns, |
| context->bw.dcn.watermarks.c.cstate_pstate.cstate_enter_plus_exit_ns, |
| context->bw.dcn.watermarks.c.cstate_pstate.cstate_exit_ns, |
| context->bw.dcn.watermarks.c.cstate_pstate.pstate_change_ns, |
| context->bw.dcn.watermarks.c.pte_meta_urgent_ns, |
| context->bw.dcn.watermarks.d.urgent_ns, |
| context->bw.dcn.watermarks.d.cstate_pstate.cstate_enter_plus_exit_ns, |
| context->bw.dcn.watermarks.d.cstate_pstate.cstate_exit_ns, |
| context->bw.dcn.watermarks.d.cstate_pstate.pstate_change_ns, |
| context->bw.dcn.watermarks.d.pte_meta_urgent_ns |
| ); |
| */ |
| } |
| |
| static void dcn10_set_bandwidth( |
| struct dc *dc, |
| struct dc_state *context, |
| bool decrease_allowed) |
| { |
| struct pp_smu_display_requirement_rv *smu_req_cur = |
| &dc->res_pool->pp_smu_req; |
| struct pp_smu_display_requirement_rv smu_req = *smu_req_cur; |
| struct pp_smu_funcs_rv *pp_smu = dc->res_pool->pp_smu; |
| |
| if (dc->debug.sanity_checks) { |
| dcn10_verify_allow_pstate_change_high(dc); |
| } |
| |
| if (IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment)) |
| return; |
| |
| if (decrease_allowed || context->bw.dcn.calc_clk.dispclk_khz |
| > dc->current_state->bw.dcn.cur_clk.dispclk_khz) { |
| dc->res_pool->display_clock->funcs->set_clock( |
| dc->res_pool->display_clock, |
| context->bw.dcn.calc_clk.dispclk_khz); |
| dc->current_state->bw.dcn.cur_clk.dispclk_khz = |
| context->bw.dcn.calc_clk.dispclk_khz; |
| } |
| if (decrease_allowed || context->bw.dcn.calc_clk.dcfclk_khz |
| > dc->current_state->bw.dcn.cur_clk.dcfclk_khz) { |
| smu_req.hard_min_dcefclk_khz = |
| context->bw.dcn.calc_clk.dcfclk_khz; |
| } |
| if (decrease_allowed || context->bw.dcn.calc_clk.fclk_khz |
| > dc->current_state->bw.dcn.cur_clk.fclk_khz) { |
| smu_req.hard_min_fclk_khz = context->bw.dcn.calc_clk.fclk_khz; |
| } |
| if (decrease_allowed || context->bw.dcn.calc_clk.dcfclk_deep_sleep_khz |
| > dc->current_state->bw.dcn.cur_clk.dcfclk_deep_sleep_khz) { |
| dc->current_state->bw.dcn.calc_clk.dcfclk_deep_sleep_khz = |
| context->bw.dcn.calc_clk.dcfclk_deep_sleep_khz; |
| context->bw.dcn.cur_clk.dcfclk_deep_sleep_khz = |
| context->bw.dcn.calc_clk.dcfclk_deep_sleep_khz; |
| } |
| |
| smu_req.display_count = context->stream_count; |
| |
| if (pp_smu->set_display_requirement) |
| pp_smu->set_display_requirement(&pp_smu->pp_smu, &smu_req); |
| |
| *smu_req_cur = smu_req; |
| |
| /* Decrease in freq is increase in period so opposite comparison for dram_ccm */ |
| if (decrease_allowed || context->bw.dcn.calc_clk.dram_ccm_us |
| < dc->current_state->bw.dcn.cur_clk.dram_ccm_us) { |
| dc->current_state->bw.dcn.calc_clk.dram_ccm_us = |
| context->bw.dcn.calc_clk.dram_ccm_us; |
| context->bw.dcn.cur_clk.dram_ccm_us = |
| context->bw.dcn.calc_clk.dram_ccm_us; |
| } |
| if (decrease_allowed || context->bw.dcn.calc_clk.min_active_dram_ccm_us |
| < dc->current_state->bw.dcn.cur_clk.min_active_dram_ccm_us) { |
| dc->current_state->bw.dcn.calc_clk.min_active_dram_ccm_us = |
| context->bw.dcn.calc_clk.min_active_dram_ccm_us; |
| context->bw.dcn.cur_clk.min_active_dram_ccm_us = |
| context->bw.dcn.calc_clk.min_active_dram_ccm_us; |
| } |
| dcn10_pplib_apply_display_requirements(dc, context); |
| |
| if (dc->debug.sanity_checks) { |
| dcn10_verify_allow_pstate_change_high(dc); |
| } |
| |
| /* need to fix this function. not doing the right thing here */ |
| } |
| |
| static void set_drr(struct pipe_ctx **pipe_ctx, |
| int num_pipes, int vmin, int vmax) |
| { |
| int i = 0; |
| struct drr_params params = {0}; |
| |
| params.vertical_total_max = vmax; |
| params.vertical_total_min = vmin; |
| |
| /* TODO: If multiple pipes are to be supported, you need |
| * some GSL stuff |
| */ |
| for (i = 0; i < num_pipes; i++) { |
| pipe_ctx[i]->stream_res.tg->funcs->set_drr(pipe_ctx[i]->stream_res.tg, ¶ms); |
| } |
| } |
| |
| static void get_position(struct pipe_ctx **pipe_ctx, |
| int num_pipes, |
| struct crtc_position *position) |
| { |
| int i = 0; |
| |
| /* TODO: handle pipes > 1 |
| */ |
| for (i = 0; i < num_pipes; i++) |
| pipe_ctx[i]->stream_res.tg->funcs->get_position(pipe_ctx[i]->stream_res.tg, position); |
| } |
| |
| static void set_static_screen_control(struct pipe_ctx **pipe_ctx, |
| int num_pipes, const struct dc_static_screen_events *events) |
| { |
| unsigned int i; |
| unsigned int value = 0; |
| |
| if (events->surface_update) |
| value |= 0x80; |
| if (events->cursor_update) |
| value |= 0x2; |
| |
| for (i = 0; i < num_pipes; i++) |
| pipe_ctx[i]->stream_res.tg->funcs-> |
| set_static_screen_control(pipe_ctx[i]->stream_res.tg, value); |
| } |
| |
| static void set_plane_config( |
| const struct dc *dc, |
| struct pipe_ctx *pipe_ctx, |
| struct resource_context *res_ctx) |
| { |
| /* TODO */ |
| program_gamut_remap(pipe_ctx); |
| } |
| |
| static void dcn10_config_stereo_parameters( |
| struct dc_stream_state *stream, struct crtc_stereo_flags *flags) |
| { |
| enum view_3d_format view_format = stream->view_format; |
| enum dc_timing_3d_format timing_3d_format =\ |
| stream->timing.timing_3d_format; |
| bool non_stereo_timing = false; |
| |
| if (timing_3d_format == TIMING_3D_FORMAT_NONE || |
| timing_3d_format == TIMING_3D_FORMAT_SIDE_BY_SIDE || |
| timing_3d_format == TIMING_3D_FORMAT_TOP_AND_BOTTOM) |
| non_stereo_timing = true; |
| |
| if (non_stereo_timing == false && |
| view_format == VIEW_3D_FORMAT_FRAME_SEQUENTIAL) { |
| |
| flags->PROGRAM_STEREO = 1; |
| flags->PROGRAM_POLARITY = 1; |
| if (timing_3d_format == TIMING_3D_FORMAT_INBAND_FA || |
| timing_3d_format == TIMING_3D_FORMAT_DP_HDMI_INBAND_FA || |
| timing_3d_format == TIMING_3D_FORMAT_SIDEBAND_FA) { |
| enum display_dongle_type dongle = \ |
| stream->sink->link->ddc->dongle_type; |
| if (dongle == DISPLAY_DONGLE_DP_VGA_CONVERTER || |
| dongle == DISPLAY_DONGLE_DP_DVI_CONVERTER || |
| dongle == DISPLAY_DONGLE_DP_HDMI_CONVERTER) |
| flags->DISABLE_STEREO_DP_SYNC = 1; |
| } |
| flags->RIGHT_EYE_POLARITY =\ |
| stream->timing.flags.RIGHT_EYE_3D_POLARITY; |
| if (timing_3d_format == TIMING_3D_FORMAT_HW_FRAME_PACKING) |
| flags->FRAME_PACKED = 1; |
| } |
| |
| return; |
| } |
| |
| static void dcn10_setup_stereo(struct pipe_ctx *pipe_ctx, struct dc *dc) |
| { |
| struct crtc_stereo_flags flags = { 0 }; |
| struct dc_stream_state *stream = pipe_ctx->stream; |
| |
| dcn10_config_stereo_parameters(stream, &flags); |
| |
| pipe_ctx->stream_res.opp->funcs->opp_program_stereo( |
| pipe_ctx->stream_res.opp, |
| flags.PROGRAM_STEREO == 1 ? true:false, |
| &stream->timing); |
| |
| pipe_ctx->stream_res.tg->funcs->program_stereo( |
| pipe_ctx->stream_res.tg, |
| &stream->timing, |
| &flags); |
| |
| return; |
| } |
| |
| static void dcn10_wait_for_mpcc_disconnect( |
| struct dc *dc, |
| struct resource_pool *res_pool, |
| struct pipe_ctx *pipe_ctx) |
| { |
| int i; |
| |
| if (dc->debug.sanity_checks) { |
| dcn10_verify_allow_pstate_change_high(dc); |
| } |
| |
| if (!pipe_ctx->stream_res.opp) |
| return; |
| |
| for (i = 0; i < MAX_PIPES; i++) { |
| if (pipe_ctx->stream_res.opp->mpcc_disconnect_pending[i]) { |
| res_pool->mpc->funcs->wait_for_idle(res_pool->mpc, i); |
| pipe_ctx->stream_res.opp->mpcc_disconnect_pending[i] = false; |
| res_pool->hubps[i]->funcs->set_blank(res_pool->hubps[i], true); |
| /*dm_logger_write(dc->ctx->logger, LOG_ERROR, |
| "[debug_mpo: wait_for_mpcc finished waiting on mpcc %d]\n", |
| i);*/ |
| } |
| } |
| |
| if (dc->debug.sanity_checks) { |
| dcn10_verify_allow_pstate_change_high(dc); |
| } |
| |
| } |
| |
| static bool dcn10_dummy_display_power_gating( |
| struct dc *dc, |
| uint8_t controller_id, |
| struct dc_bios *dcb, |
| enum pipe_gating_control power_gating) |
| { |
| return true; |
| } |
| |
| static void dcn10_update_pending_status(struct pipe_ctx *pipe_ctx) |
| { |
| struct dc_plane_state *plane_state = pipe_ctx->plane_state; |
| struct timing_generator *tg = pipe_ctx->stream_res.tg; |
| |
| if (plane_state == NULL) |
| return; |
| |
| plane_state->status.is_flip_pending = |
| pipe_ctx->plane_res.hubp->funcs->hubp_is_flip_pending( |
| pipe_ctx->plane_res.hubp); |
| |
| plane_state->status.current_address = pipe_ctx->plane_res.hubp->current_address; |
| if (pipe_ctx->plane_res.hubp->current_address.type == PLN_ADDR_TYPE_GRPH_STEREO && |
| tg->funcs->is_stereo_left_eye) { |
| plane_state->status.is_right_eye = |
| !tg->funcs->is_stereo_left_eye(pipe_ctx->stream_res.tg); |
| } |
| } |
| |
| static void dcn10_update_dchub(struct dce_hwseq *hws, struct dchub_init_data *dh_data) |
| { |
| if (hws->ctx->dc->res_pool->hubbub != NULL) |
| hubbub1_update_dchub(hws->ctx->dc->res_pool->hubbub, dh_data); |
| } |
| |
| static void dcn10_set_cursor_position(struct pipe_ctx *pipe_ctx) |
| { |
| struct dc_cursor_position pos_cpy = pipe_ctx->stream->cursor_position; |
| struct hubp *hubp = pipe_ctx->plane_res.hubp; |
| struct dpp *dpp = pipe_ctx->plane_res.dpp; |
| struct dc_cursor_mi_param param = { |
| .pixel_clk_khz = pipe_ctx->stream->timing.pix_clk_khz, |
| .ref_clk_khz = pipe_ctx->stream->ctx->dc->res_pool->ref_clock_inKhz, |
| .viewport_x_start = pipe_ctx->plane_res.scl_data.viewport.x, |
| .viewport_width = pipe_ctx->plane_res.scl_data.viewport.width, |
| .h_scale_ratio = pipe_ctx->plane_res.scl_data.ratios.horz |
| }; |
| |
| if (pipe_ctx->plane_state->address.type |
| == PLN_ADDR_TYPE_VIDEO_PROGRESSIVE) |
| pos_cpy.enable = false; |
| |
| if (pipe_ctx->top_pipe && pipe_ctx->plane_state != pipe_ctx->top_pipe->plane_state) |
| pos_cpy.enable = false; |
| |
| hubp->funcs->set_cursor_position(hubp, &pos_cpy, ¶m); |
| dpp->funcs->set_cursor_position(dpp, &pos_cpy, ¶m, hubp->curs_attr.width); |
| } |
| |
| static void dcn10_set_cursor_attribute(struct pipe_ctx *pipe_ctx) |
| { |
| struct dc_cursor_attributes *attributes = &pipe_ctx->stream->cursor_attributes; |
| |
| pipe_ctx->plane_res.hubp->funcs->set_cursor_attributes( |
| pipe_ctx->plane_res.hubp, attributes); |
| pipe_ctx->plane_res.dpp->funcs->set_cursor_attributes( |
| pipe_ctx->plane_res.dpp, attributes->color_format); |
| } |
| |
| static const struct hw_sequencer_funcs dcn10_funcs = { |
| .program_gamut_remap = program_gamut_remap, |
| .program_csc_matrix = program_csc_matrix, |
| .init_hw = dcn10_init_hw, |
| .apply_ctx_to_hw = dce110_apply_ctx_to_hw, |
| .apply_ctx_for_surface = dcn10_apply_ctx_for_surface, |
| .set_plane_config = set_plane_config, |
| .update_plane_addr = dcn10_update_plane_addr, |
| .update_dchub = dcn10_update_dchub, |
| .update_pending_status = dcn10_update_pending_status, |
| .set_input_transfer_func = dcn10_set_input_transfer_func, |
| .set_output_transfer_func = dcn10_set_output_transfer_func, |
| .power_down = dce110_power_down, |
| .enable_accelerated_mode = dce110_enable_accelerated_mode, |
| .enable_timing_synchronization = dcn10_enable_timing_synchronization, |
| .enable_per_frame_crtc_position_reset = dcn10_enable_per_frame_crtc_position_reset, |
| .update_info_frame = dce110_update_info_frame, |
| .enable_stream = dce110_enable_stream, |
| .disable_stream = dce110_disable_stream, |
| .unblank_stream = dce110_unblank_stream, |
| .enable_display_power_gating = dcn10_dummy_display_power_gating, |
| .disable_plane = dcn10_disable_plane, |
| .pipe_control_lock = dcn10_pipe_control_lock, |
| .set_bandwidth = dcn10_set_bandwidth, |
| .reset_hw_ctx_wrap = reset_hw_ctx_wrap, |
| .prog_pixclk_crtc_otg = dcn10_prog_pixclk_crtc_otg, |
| .set_drr = set_drr, |
| .get_position = get_position, |
| .set_static_screen_control = set_static_screen_control, |
| .setup_stereo = dcn10_setup_stereo, |
| .set_avmute = dce110_set_avmute, |
| .log_hw_state = dcn10_log_hw_state, |
| .wait_for_mpcc_disconnect = dcn10_wait_for_mpcc_disconnect, |
| .ready_shared_resources = ready_shared_resources, |
| .optimize_shared_resources = optimize_shared_resources, |
| .pplib_apply_display_requirements = |
| dcn10_pplib_apply_display_requirements, |
| .edp_backlight_control = hwss_edp_backlight_control, |
| .edp_power_control = hwss_edp_power_control, |
| .edp_wait_for_hpd_ready = hwss_edp_wait_for_hpd_ready, |
| .set_cursor_position = dcn10_set_cursor_position, |
| .set_cursor_attribute = dcn10_set_cursor_attribute |
| }; |
| |
| |
| void dcn10_hw_sequencer_construct(struct dc *dc) |
| { |
| dc->hwss = dcn10_funcs; |
| } |
| |