| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) Siemens AG, 2018-2024 |
| * |
| * Authors: |
| * Le Jin <le.jin@siemens.com> |
| * Jan Kiszka <jan.kiszka@siemens.com> |
| * |
| * Common bits of the IOT2050 Basic and Advanced variants, PG1 and PG2 |
| */ |
| |
| #include <dt-bindings/leds/common.h> |
| #include <dt-bindings/phy/phy.h> |
| #include <dt-bindings/net/ti-dp83867.h> |
| |
| / { |
| aliases { |
| serial0 = &wkup_uart0; |
| serial1 = &mcu_uart0; |
| serial2 = &main_uart0; |
| serial3 = &main_uart1; |
| i2c0 = &wkup_i2c0; |
| i2c1 = &mcu_i2c0; |
| i2c2 = &main_i2c0; |
| i2c3 = &main_i2c1; |
| i2c4 = &main_i2c2; |
| i2c5 = &main_i2c3; |
| spi0 = &mcu_spi0; |
| mmc0 = &sdhci1; |
| mmc1 = &sdhci0; |
| ethernet1 = &icssg0_emac0; |
| ethernet2 = &icssg0_emac1; |
| }; |
| |
| chosen { |
| stdout-path = "serial3:115200n8"; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| secure_ddr: secure-ddr@9e800000 { |
| reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */ |
| alignment = <0x1000>; |
| no-map; |
| }; |
| |
| mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { |
| compatible = "shared-dma-pool"; |
| reg = <0 0xa0000000 0 0x100000>; |
| no-map; |
| }; |
| |
| mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { |
| compatible = "shared-dma-pool"; |
| reg = <0 0xa0100000 0 0xf00000>; |
| no-map; |
| }; |
| |
| mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { |
| compatible = "shared-dma-pool"; |
| reg = <0 0xa1000000 0 0x100000>; |
| no-map; |
| }; |
| |
| mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { |
| compatible = "shared-dma-pool"; |
| reg = <0 0xa1100000 0 0xf00000>; |
| no-map; |
| }; |
| |
| rtos_ipc_memory_region: ipc-memories@a2000000 { |
| reg = <0x00 0xa2000000 0x00 0x00200000>; |
| alignment = <0x1000>; |
| no-map; |
| }; |
| |
| /* To reserve the power-on(PON) reason for watchdog reset */ |
| wdt_reset_memory_region: wdt-memory@a2200000 { |
| reg = <0x00 0xa2200000 0x00 0x1000>; |
| no-map; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&leds_pins_default>; |
| |
| led-0 { |
| color = <LED_COLOR_ID_RED>; |
| function = LED_FUNCTION_STATUS; |
| label = "status-led-red"; |
| gpios = <&wkup_gpio0 32 GPIO_ACTIVE_HIGH>; |
| panic-indicator; |
| }; |
| |
| led-1 { |
| color = <LED_COLOR_ID_GREEN>; |
| function = LED_FUNCTION_STATUS; |
| label = "status-led-green"; |
| gpios = <&wkup_gpio0 24 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led-2 { |
| color = <LED_COLOR_ID_RED>; |
| function = LED_FUNCTION_INDICATOR; |
| label = "user-led1-red"; |
| gpios = <&pcal9535_3 14 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led-3 { |
| color = <LED_COLOR_ID_GREEN>; |
| function = LED_FUNCTION_INDICATOR; |
| label = "user-led1-green"; |
| gpios = <&pcal9535_2 15 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led-4 { |
| color = <LED_COLOR_ID_RED>; |
| function = LED_FUNCTION_INDICATOR; |
| label = "user-led2-red"; |
| gpios = <&wkup_gpio0 17 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led-5 { |
| color = <LED_COLOR_ID_RED>; |
| function = LED_FUNCTION_INDICATOR; |
| label = "user-led2-green"; |
| gpios = <&wkup_gpio0 22 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| dp_refclk: clock { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <19200000>; |
| }; |
| |
| /* Dual Ethernet application node on PRU-ICSSG0 */ |
| icssg0_eth: icssg0-eth { |
| compatible = "ti,am654-icssg-prueth"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&icssg0_rgmii_pins_default>; |
| sram = <&msmc_ram>; |
| |
| ti,prus = <&pru0_0>, <&rtu0_0>, <&tx_pru0_0>, |
| <&pru0_1>, <&rtu0_1>, <&tx_pru0_1>; |
| firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf", |
| "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf", |
| "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf", |
| "ti-pruss/am65x-sr2-pru1-prueth-fw.elf", |
| "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf", |
| "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf"; |
| |
| ti,pruss-gp-mux-sel = <2>, /* MII mode */ |
| <2>, |
| <2>, |
| <2>, /* MII mode */ |
| <2>, |
| <2>; |
| |
| ti,mii-g-rt = <&icssg0_mii_g_rt>; |
| ti,mii-rt = <&icssg0_mii_rt>; |
| ti,iep = <&icssg0_iep0>, <&icssg0_iep1>; |
| |
| interrupt-parent = <&icssg0_intc>; |
| interrupts = <24 0 2>, <25 1 3>; |
| interrupt-names = "tx_ts0", "tx_ts1"; |
| |
| dmas = <&main_udmap 0xc100>, /* egress slice 0 */ |
| <&main_udmap 0xc101>, /* egress slice 0 */ |
| <&main_udmap 0xc102>, /* egress slice 0 */ |
| <&main_udmap 0xc103>, /* egress slice 0 */ |
| <&main_udmap 0xc104>, /* egress slice 1 */ |
| <&main_udmap 0xc105>, /* egress slice 1 */ |
| <&main_udmap 0xc106>, /* egress slice 1 */ |
| <&main_udmap 0xc107>, /* egress slice 1 */ |
| <&main_udmap 0x4100>, /* ingress slice 0 */ |
| <&main_udmap 0x4101>; /* ingress slice 1 */ |
| dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3", |
| "tx1-0", "tx1-1", "tx1-2", "tx1-3", |
| "rx0", "rx1"; |
| |
| ethernet-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| icssg0_emac0: port@0 { |
| reg = <0>; |
| phy-handle = <&icssg0_eth0_phy>; |
| phy-mode = "rgmii-id"; |
| ti,syscon-rgmii-delay = <&scm_conf 0x4100>; |
| ti,half-duplex-capable; |
| /* Filled in by bootloader */ |
| local-mac-address = [00 00 00 00 00 00]; |
| }; |
| |
| icssg0_emac1: port@1 { |
| reg = <1>; |
| phy-handle = <&icssg0_eth1_phy>; |
| phy-mode = "rgmii-id"; |
| ti,syscon-rgmii-delay = <&scm_conf 0x4104>; |
| ti,half-duplex-capable; |
| /* Filled in by bootloader */ |
| local-mac-address = [00 00 00 00 00 00]; |
| }; |
| }; |
| }; |
| }; |
| |
| &wkup_pmx0 { |
| mcu_i2c0_pins_default: mcu-i2c0-default-pins { |
| pinctrl-single,pins = < |
| /* (AD8) MCU_I2C0_SCL */ |
| AM65X_WKUP_IOPAD(0x00e8, PIN_INPUT, 0) |
| /* (AD7) MCU_I2C0_SDA */ |
| AM65X_WKUP_IOPAD(0x00ec, PIN_INPUT, 0) |
| >; |
| }; |
| |
| push_button_pins_default: push-button-default-pins { |
| pinctrl-single,pins = < |
| /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */ |
| AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) |
| >; |
| }; |
| |
| mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { |
| pinctrl-single,pins = < |
| /* (V1) MCU_OSPI0_CLK */ |
| AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) |
| /* (U2) MCU_OSPI0_DQS */ |
| AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) |
| /* (U4) MCU_OSPI0_D0 */ |
| AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0) |
| /* (U5) MCU_OSPI0_D1 */ |
| AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0) |
| /* (R4) MCU_OSPI0_CSn0 */ |
| AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) |
| >; |
| }; |
| |
| db9_com_mode_pins_default: db9-com-mode-default-pins { |
| pinctrl-single,pins = < |
| /* (AD3) WKUP_GPIO0_5, used as uart0 mode 0 */ |
| AM65X_WKUP_IOPAD(0x00c4, PIN_OUTPUT, 7) |
| /* (AC3) WKUP_GPIO0_4, used as uart0 mode 1 */ |
| AM65X_WKUP_IOPAD(0x00c0, PIN_OUTPUT, 7) |
| /* (AC1) WKUP_GPIO0_7, used as uart0 term */ |
| AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 7) |
| /* (AC2) WKUP_GPIO0_6, used as uart0 en */ |
| AM65X_WKUP_IOPAD(0x00c8, PIN_OUTPUT, 7) |
| >; |
| }; |
| |
| leds_pins_default: leds-default-pins { |
| pinctrl-single,pins = < |
| /* (T2) WKUP_GPIO0_17, used as user led1 red */ |
| AM65X_WKUP_IOPAD(0x0014, PIN_OUTPUT, 7) |
| /* (R3) WKUP_GPIO0_22, used as user led1 green */ |
| AM65X_WKUP_IOPAD(0x0028, PIN_OUTPUT, 7) |
| /* (R5) WKUP_GPIO0_24, used as status led red */ |
| AM65X_WKUP_IOPAD(0x0030, PIN_OUTPUT, 7) |
| /* (N2) WKUP_GPIO0_32, used as status led green */ |
| AM65X_WKUP_IOPAD(0x0050, PIN_OUTPUT, 7) |
| >; |
| }; |
| |
| mcu_spi0_pins_default: mcu-spi0-default-pins { |
| pinctrl-single,pins = < |
| /* (Y1) MCU_SPI0_CLK */ |
| AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 0) |
| /* (Y3) MCU_SPI0_D0 */ |
| AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 0) |
| /* (Y2) MCU_SPI0_D1 */ |
| AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 0) |
| /* (Y4) MCU_SPI0_CS0 */ |
| AM65X_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0) |
| >; |
| }; |
| |
| minipcie_pins_default: minipcie-default-pins { |
| pinctrl-single,pins = < |
| /* (P2) MCU_OSPI1_DQS.WKUP_GPIO0_27 */ |
| AM65X_WKUP_IOPAD(0x003C, PIN_OUTPUT, 7) |
| >; |
| }; |
| }; |
| |
| &main_pmx0 { |
| main_pcie_enable_pins_default: main-pcie-enable-default-pins { |
| pinctrl-single,pins = < |
| AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7) /* (AH13) GPIO1_17 */ |
| >; |
| }; |
| |
| main_uart1_pins_default: main-uart1-default-pins { |
| pinctrl-single,pins = < |
| AM65X_IOPAD(0x0174, PIN_INPUT, 6) /* (AE23) UART1_RXD */ |
| AM65X_IOPAD(0x014c, PIN_OUTPUT, 6) /* (AD23) UART1_TXD */ |
| AM65X_IOPAD(0x0178, PIN_INPUT, 6) /* (AD22) UART1_CTSn */ |
| AM65X_IOPAD(0x017c, PIN_OUTPUT, 6) /* (AC21) UART1_RTSn */ |
| >; |
| }; |
| |
| main_i2c3_pins_default: main-i2c3-default-pins { |
| pinctrl-single,pins = < |
| AM65X_IOPAD(0x01c0, PIN_INPUT, 2) /* (AF13) I2C3_SCL */ |
| AM65X_IOPAD(0x01d4, PIN_INPUT, 2) /* (AG12) I2C3_SDA */ |
| >; |
| }; |
| |
| main_mmc1_pins_default: main-mmc1-default-pins { |
| pinctrl-single,pins = < |
| AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */ |
| AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */ |
| AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0) /* (D28) MMC1_DAT0 */ |
| AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0) /* (E27) MMC1_DAT1 */ |
| AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0) /* (D26) MMC1_DAT2 */ |
| AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */ |
| AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */ |
| AM65X_IOPAD(0x02e0, PIN_INPUT_PULLUP, 0) /* (C24) MMC1_SDWP */ |
| >; |
| }; |
| |
| usb0_pins_default: usb0-default-pins { |
| pinctrl-single,pins = < |
| AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */ |
| >; |
| }; |
| |
| usb1_pins_default: usb1-default-pins { |
| pinctrl-single,pins = < |
| AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */ |
| >; |
| }; |
| |
| main_i2c2_pins_default: main-i2c2-default-pins { |
| pinctrl-single,pins = < |
| AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) I2C2_SCL */ |
| AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) I2C2_SDA */ |
| >; |
| }; |
| |
| icssg0_mdio_pins_default: icssg0-mdio-default-pins { |
| pinctrl-single,pins = < |
| AM65X_IOPAD(0x0294, PIN_INPUT, 0) /* (AE26) PRG0_MDIO0_MDIO */ |
| AM65X_IOPAD(0x0298, PIN_OUTPUT, 0) /* (AE28) PRG0_MDIO0_MDC */ |
| >; |
| }; |
| |
| icssg0_rgmii_pins_default: icssg0-rgmii-default-pins { |
| pinctrl-single,pins = < |
| AM65X_IOPAD(0x0244, PIN_INPUT, 2) /* (AB28) PRG0_PRU1_GPO0.PRG0_RGMII2_RD0 */ |
| AM65X_IOPAD(0x0248, PIN_INPUT, 2) /* (AC28) PRG0_PRU1_GPO1.PRG0_RGMII2_RD1 */ |
| AM65X_IOPAD(0x024c, PIN_INPUT, 2) /* (AC27) PRG0_PRU1_GPO2.PRG0_RGMII2_RD2 */ |
| AM65X_IOPAD(0x0250, PIN_INPUT, 2) /* (AB26) PRG0_PRU1_GPO3.PRG0_RGMII2_RD3 */ |
| AM65X_IOPAD(0x0274, PIN_OUTPUT, 2) /* (AC25) PRG0_PRU1_GPO12.PRG0_RGMII2_TD0 */ |
| AM65X_IOPAD(0x0278, PIN_OUTPUT, 2) /* (AD25) PRG0_PRU1_GPO13.PRG0_RGMII2_TD1 */ |
| AM65X_IOPAD(0x027c, PIN_OUTPUT, 2) /* (AD24) PRG0_PRU1_GPO14.PRG0_RGMII2_TD2 */ |
| AM65X_IOPAD(0x0280, PIN_OUTPUT, 2) /* (AE27) PRG0_PRU1_GPO15.PRG0_RGMII2_TD3 */ |
| AM65X_IOPAD(0x0284, PIN_INPUT, 2) /* (AC24) PRG0_PRU1_GPO16.PRG0_RGMII2_TXC */ |
| AM65X_IOPAD(0x0270, PIN_OUTPUT, 2) /* (AB24) PRG0_PRU1_GPO11.PRG0_RGMII2_TX_CTL */ |
| AM65X_IOPAD(0x025c, PIN_INPUT, 2) /* (AB27) PRG0_PRU1_GPO6.PRG0_RGMII2_RXC */ |
| AM65X_IOPAD(0x0254, PIN_INPUT, 2) /* (AA25) PRG0_PRU1_GPO4.PRG0_RGMII2_RX_CTL */ |
| |
| AM65X_IOPAD(0x01f4, PIN_INPUT, 2) /* (V24) PRG0_PRU0_GPO0.PRG0_RGMII1_RD0 */ |
| AM65X_IOPAD(0x01f8, PIN_INPUT, 2) /* (W25) PRG0_PRU0_GPO1.PRG0_RGMII1_RD1 */ |
| AM65X_IOPAD(0x01fc, PIN_INPUT, 2) /* (W24) PRG0_PRU0_GPO2.PRG0_RGMII1_RD2 */ |
| AM65X_IOPAD(0x0200, PIN_INPUT, 2) /* (AA27) PRG0_PRU0_GPO3.PRG0_RGMII1_RD3 */ |
| AM65X_IOPAD(0x0224, PIN_OUTPUT, 2) /* (AD27) PRG0_PRU0_GPO12.PRG0_RGMII1_TD0 */ |
| AM65X_IOPAD(0x0228, PIN_OUTPUT, 2) /* (AC26) PRG0_PRU0_GPO13.PRG0_RGMII1_TD1 */ |
| AM65X_IOPAD(0x022c, PIN_OUTPUT, 2) /* (AD26) PRG0_PRU0_GPO14.PRG0_RGMII1_TD2 */ |
| AM65X_IOPAD(0x0230, PIN_OUTPUT, 2) /* (AA24) PRG0_PRU0_GPO15.PRG0_RGMII1_TD3 */ |
| AM65X_IOPAD(0x0234, PIN_INPUT, 2) /* (AD28) PRG0_PRU0_GPO16.PRG0_RGMII1_TXC */ |
| AM65X_IOPAD(0x0220, PIN_OUTPUT, 2) /* (AB25) PRG0_PRU0_GPO11.PRG0_RGMII1_TX_CTL */ |
| AM65X_IOPAD(0x020c, PIN_INPUT, 2) /* (Y25) PRG0_PRU0_GPO6.PRG0_RGMII1_RXC */ |
| AM65X_IOPAD(0x0204, PIN_INPUT, 2) /* (Y24) PRG0_PRU0_GPO4.PRG0_RGMII1_RX_CTL */ |
| >; |
| }; |
| }; |
| |
| &main_pmx1 { |
| main_i2c0_pins_default: main-i2c0-default-pins { |
| pinctrl-single,pins = < |
| AM65X_IOPAD(0x0000, PIN_INPUT, 0) /* (D20) I2C0_SCL */ |
| AM65X_IOPAD(0x0004, PIN_INPUT, 0) /* (C21) I2C0_SDA */ |
| >; |
| }; |
| |
| main_i2c1_pins_default: main-i2c1-default-pins { |
| pinctrl-single,pins = < |
| AM65X_IOPAD(0x0008, PIN_INPUT, 0) /* (B21) I2C1_SCL */ |
| AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */ |
| >; |
| }; |
| }; |
| |
| &wkup_uart0 { |
| /* Wakeup UART is used by System firmware */ |
| status = "reserved"; |
| }; |
| |
| &main_uart1 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&main_uart1_pins_default>; |
| }; |
| |
| &main_gpio1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&main_pcie_enable_pins_default>; |
| }; |
| |
| &mcu_i2c0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mcu_i2c0_pins_default>; |
| clock-frequency = <400000>; |
| |
| psu: regulator@60 { |
| compatible = "ti,tps62363"; |
| reg = <0x60>; |
| regulator-name = "tps62363-vout"; |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1500000>; |
| regulator-boot-on; |
| ti,vsel0-state-high; |
| ti,vsel1-state-high; |
| ti,enable-vout-discharge; |
| }; |
| }; |
| |
| &main_i2c0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&main_i2c0_pins_default>; |
| clock-frequency = <400000>; |
| |
| rtc: rtc@51 { |
| compatible = "nxp,pcf8563"; |
| reg = <0x51>; |
| }; |
| |
| eeprom: eeprom@54 { |
| compatible = "atmel,24c08"; |
| reg = <0x54>; |
| pagesize = <16>; |
| }; |
| }; |
| |
| &main_i2c1 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&main_i2c1_pins_default>; |
| clock-frequency = <400000>; |
| }; |
| |
| &main_i2c2 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&main_i2c2_pins_default>; |
| clock-frequency = <400000>; |
| }; |
| |
| &main_i2c3 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&main_i2c3_pins_default>; |
| clock-frequency = <400000>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| &mcu_cpsw { |
| status = "disabled"; |
| }; |
| |
| &sdhci1 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&main_mmc1_pins_default>; |
| ti,driver-strength-ohm = <50>; |
| disable-wp; |
| }; |
| |
| &usb0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&usb0_pins_default>; |
| dr_mode = "host"; |
| }; |
| |
| &usb1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&usb1_pins_default>; |
| dr_mode = "host"; |
| }; |
| |
| &mcu_spi0 { |
| status = "okay"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| ti,pindir-d0-out-d1-in; |
| }; |
| |
| &ospi0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; |
| |
| flash@0 { |
| compatible = "jedec,spi-nor"; |
| reg = <0x0>; |
| spi-tx-bus-width = <1>; |
| spi-rx-bus-width = <1>; |
| spi-max-frequency = <50000000>; |
| cdns,tshsl-ns = <60>; |
| cdns,tsd2d-ns = <60>; |
| cdns,tchsh-ns = <60>; |
| cdns,tslch-ns = <60>; |
| cdns,read-delay = <2>; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| seboot@0 { |
| label = "seboot"; |
| reg = <0x0 0x180000>; /* 1.5M */ |
| }; |
| |
| tispl@180000 { |
| label = "tispl"; |
| reg = <0x180000 0x200000>; /* 2M */ |
| }; |
| |
| u-boot@380000 { |
| label = "u-boot"; |
| reg = <0x380000 0x300000>; /* 3M */ |
| }; |
| |
| env@680000 { |
| label = "env"; |
| reg = <0x680000 0x20000>; /* 128K */ |
| }; |
| |
| env-backup@6a0000 { |
| label = "env.backup"; |
| reg = <0x6a0000 0x20000>; /* 128K */ |
| }; |
| |
| otpcmd@6c0000 { |
| label = "otpcmd"; |
| reg = <0x6c0000 0x10000>; /* 64K */ |
| }; |
| |
| unused@6d0000 { |
| label = "unused"; |
| reg = <0x6d0000 0x7b0000>; /* 7872K */ |
| }; |
| |
| seboot-backup@e80000 { |
| label = "seboot.backup"; |
| reg = <0xe80000 0x180000>; /* 1.5M */ |
| }; |
| }; |
| }; |
| }; |
| |
| &pcie1_rc { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&minipcie_pins_default>; |
| |
| num-lanes = <1>; |
| phys = <&serdes1 PHY_TYPE_PCIE 0>; |
| phy-names = "pcie-phy0"; |
| reset-gpios = <&wkup_gpio0 27 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| &mailbox0_cluster0 { |
| status = "okay"; |
| interrupts = <436>; |
| |
| mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { |
| ti,mbox-tx = <1 0 0>; |
| ti,mbox-rx = <0 0 0>; |
| }; |
| }; |
| |
| &mailbox0_cluster1 { |
| status = "okay"; |
| interrupts = <432>; |
| |
| mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { |
| ti,mbox-tx = <1 0 0>; |
| ti,mbox-rx = <0 0 0>; |
| }; |
| }; |
| |
| &mcu_r5fss0_core0 { |
| memory-region = <&mcu_r5fss0_core0_dma_memory_region>, |
| <&mcu_r5fss0_core0_memory_region>; |
| mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; |
| }; |
| |
| &mcu_r5fss0_core1 { |
| memory-region = <&mcu_r5fss0_core1_dma_memory_region>, |
| <&mcu_r5fss0_core1_memory_region>; |
| mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>; |
| }; |
| |
| &mcu_rti1 { |
| memory-region = <&wdt_reset_memory_region>; |
| }; |
| |
| &icssg0_mdio { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&icssg0_mdio_pins_default>; |
| |
| icssg0_eth0_phy: ethernet-phy@0 { |
| reg = <0>; |
| ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; |
| ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; |
| |
| leds { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| led@0 { |
| reg = <0>; |
| color = <LED_COLOR_ID_GREEN>; |
| function = LED_FUNCTION_LAN; |
| }; |
| |
| led@1 { |
| reg = <1>; |
| color = <LED_COLOR_ID_GREEN>; |
| function = LED_FUNCTION_SPEED_LAN; |
| }; |
| |
| led@2 { |
| reg = <2>; |
| color = <LED_COLOR_ID_YELLOW>; |
| function = LED_FUNCTION_SPEED_LAN; |
| }; |
| }; |
| }; |
| |
| icssg0_eth1_phy: ethernet-phy@1 { |
| reg = <1>; |
| ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; |
| ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; |
| |
| leds { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| led@0 { |
| reg = <0>; |
| color = <LED_COLOR_ID_GREEN>; |
| function = LED_FUNCTION_LAN; |
| }; |
| |
| led@1 { |
| reg = <1>; |
| color = <LED_COLOR_ID_GREEN>; |
| function = LED_FUNCTION_SPEED_LAN; |
| }; |
| |
| led@2 { |
| reg = <2>; |
| color = <LED_COLOR_ID_YELLOW>; |
| function = LED_FUNCTION_SPEED_LAN; |
| }; |
| }; |
| }; |
| }; |
| |
| &mcu_r5fss0 { |
| /* lock-step mode not supported on iot2050 boards */ |
| ti,cluster-mode = <0>; |
| }; |
