| /* |
| * Driver for A2 audio system used in SGI machines |
| * Copyright (c) 2001, 2002, 2003 Ladislav Michl <ladis@linux-mips.org> |
| * |
| * Based on Ulf Carlsson's code. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * Supported devices: |
| * /dev/dsp standard dsp device, (mostly) OSS compatible |
| * /dev/mixer standard mixer device, (mostly) OSS compatible |
| * |
| */ |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/sched.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/poll.h> |
| #include <linux/interrupt.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/sound.h> |
| #include <linux/soundcard.h> |
| #include <linux/mutex.h> |
| |
| |
| #include <asm/io.h> |
| #include <asm/sgi/hpc3.h> |
| #include <asm/sgi/ip22.h> |
| |
| #include "hal2.h" |
| |
| #if 0 |
| #define DEBUG(args...) printk(args) |
| #else |
| #define DEBUG(args...) |
| #endif |
| |
| #if 0 |
| #define DEBUG_MIX(args...) printk(args) |
| #else |
| #define DEBUG_MIX(args...) |
| #endif |
| |
| /* |
| * Before touching these look how it works. It is a bit unusual I know, |
| * but it helps to keep things simple. This driver is considered complete |
| * and I won't add any new features although hardware has many cool |
| * capabilities. |
| * (Historical note: HAL2 driver was first written by Ulf Carlsson - ALSA |
| * 0.3 running with 2.2.x kernel. Then ALSA changed completely and it |
| * seemed easier to me to write OSS driver from scratch - this one. Now |
| * when ALSA is official part of 2.6 kernel it's time to write ALSA driver |
| * using (hopefully) final version of ALSA interface) |
| */ |
| #define H2_BLOCK_SIZE 1024 |
| #define H2_ADC_BUFSIZE 8192 |
| #define H2_DAC_BUFSIZE 16834 |
| |
| struct hal2_pbus { |
| struct hpc3_pbus_dmacregs *pbus; |
| int pbusnr; |
| unsigned int ctrl; /* Current state of pbus->pbdma_ctrl */ |
| }; |
| |
| struct hal2_desc { |
| struct hpc_dma_desc desc; |
| u32 cnt; /* don't touch, it is also padding */ |
| }; |
| |
| struct hal2_codec { |
| unsigned char *buffer; |
| struct hal2_desc *desc; |
| int desc_count; |
| int tail, head; /* tail index, head index */ |
| struct hal2_pbus pbus; |
| unsigned int format; /* Audio data format */ |
| int voices; /* mono/stereo */ |
| unsigned int sample_rate; |
| unsigned int master; /* Master frequency */ |
| unsigned short mod; /* MOD value */ |
| unsigned short inc; /* INC value */ |
| |
| wait_queue_head_t dma_wait; |
| spinlock_t lock; |
| struct mutex sem; |
| |
| int usecount; /* recording and playback are |
| * independent */ |
| }; |
| |
| #define H2_MIX_OUTPUT_ATT 0 |
| #define H2_MIX_INPUT_GAIN 1 |
| #define H2_MIXERS 2 |
| struct hal2_mixer { |
| int modcnt; |
| unsigned int master; |
| unsigned int volume[H2_MIXERS]; |
| }; |
| |
| struct hal2_card { |
| int dev_dsp; /* audio device */ |
| int dev_mixer; /* mixer device */ |
| int dev_midi; /* midi device */ |
| |
| struct hal2_ctl_regs *ctl_regs; /* HAL2 ctl registers */ |
| struct hal2_aes_regs *aes_regs; /* HAL2 aes registers */ |
| struct hal2_vol_regs *vol_regs; /* HAL2 vol registers */ |
| struct hal2_syn_regs *syn_regs; /* HAL2 syn registers */ |
| |
| struct hal2_codec dac; |
| struct hal2_codec adc; |
| struct hal2_mixer mixer; |
| }; |
| |
| #define H2_INDIRECT_WAIT(regs) while (regs->isr & H2_ISR_TSTATUS); |
| |
| #define H2_READ_ADDR(addr) (addr | (1<<7)) |
| #define H2_WRITE_ADDR(addr) (addr) |
| |
| static char *hal2str = "HAL2"; |
| |
| /* |
| * I doubt anyone has a machine with two HAL2 cards. It's possible to |
| * have two HPC's, so it is probably possible to have two HAL2 cards. |
| * Try to deal with it, but note that it is not tested. |
| */ |
| #define MAXCARDS 2 |
| static struct hal2_card* hal2_card[MAXCARDS]; |
| |
| static const struct { |
| unsigned char idx:4, avail:1; |
| } mixtable[SOUND_MIXER_NRDEVICES] = { |
| [SOUND_MIXER_PCM] = { H2_MIX_OUTPUT_ATT, 1 }, /* voice */ |
| [SOUND_MIXER_MIC] = { H2_MIX_INPUT_GAIN, 1 }, /* mic */ |
| }; |
| |
| #define H2_SUPPORTED_FORMATS (AFMT_S16_LE | AFMT_S16_BE) |
| |
| static inline void hal2_isr_write(struct hal2_card *hal2, u16 val) |
| { |
| hal2->ctl_regs->isr = val; |
| } |
| |
| static inline u16 hal2_isr_look(struct hal2_card *hal2) |
| { |
| return hal2->ctl_regs->isr; |
| } |
| |
| static inline u16 hal2_rev_look(struct hal2_card *hal2) |
| { |
| return hal2->ctl_regs->rev; |
| } |
| |
| #ifdef HAL2_DUMP_REGS |
| static u16 hal2_i_look16(struct hal2_card *hal2, u16 addr) |
| { |
| struct hal2_ctl_regs *regs = hal2->ctl_regs; |
| |
| regs->iar = H2_READ_ADDR(addr); |
| H2_INDIRECT_WAIT(regs); |
| return regs->idr0; |
| } |
| #endif |
| |
| static u32 hal2_i_look32(struct hal2_card *hal2, u16 addr) |
| { |
| u32 ret; |
| struct hal2_ctl_regs *regs = hal2->ctl_regs; |
| |
| regs->iar = H2_READ_ADDR(addr); |
| H2_INDIRECT_WAIT(regs); |
| ret = regs->idr0 & 0xffff; |
| regs->iar = H2_READ_ADDR(addr | 0x1); |
| H2_INDIRECT_WAIT(regs); |
| ret |= (regs->idr0 & 0xffff) << 16; |
| return ret; |
| } |
| |
| static void hal2_i_write16(struct hal2_card *hal2, u16 addr, u16 val) |
| { |
| struct hal2_ctl_regs *regs = hal2->ctl_regs; |
| |
| regs->idr0 = val; |
| regs->idr1 = 0; |
| regs->idr2 = 0; |
| regs->idr3 = 0; |
| regs->iar = H2_WRITE_ADDR(addr); |
| H2_INDIRECT_WAIT(regs); |
| } |
| |
| static void hal2_i_write32(struct hal2_card *hal2, u16 addr, u32 val) |
| { |
| struct hal2_ctl_regs *regs = hal2->ctl_regs; |
| |
| regs->idr0 = val & 0xffff; |
| regs->idr1 = val >> 16; |
| regs->idr2 = 0; |
| regs->idr3 = 0; |
| regs->iar = H2_WRITE_ADDR(addr); |
| H2_INDIRECT_WAIT(regs); |
| } |
| |
| static void hal2_i_setbit16(struct hal2_card *hal2, u16 addr, u16 bit) |
| { |
| struct hal2_ctl_regs *regs = hal2->ctl_regs; |
| |
| regs->iar = H2_READ_ADDR(addr); |
| H2_INDIRECT_WAIT(regs); |
| regs->idr0 = (regs->idr0 & 0xffff) | bit; |
| regs->idr1 = 0; |
| regs->idr2 = 0; |
| regs->idr3 = 0; |
| regs->iar = H2_WRITE_ADDR(addr); |
| H2_INDIRECT_WAIT(regs); |
| } |
| |
| static void hal2_i_setbit32(struct hal2_card *hal2, u16 addr, u32 bit) |
| { |
| u32 tmp; |
| struct hal2_ctl_regs *regs = hal2->ctl_regs; |
| |
| regs->iar = H2_READ_ADDR(addr); |
| H2_INDIRECT_WAIT(regs); |
| tmp = (regs->idr0 & 0xffff) | (regs->idr1 << 16) | bit; |
| regs->idr0 = tmp & 0xffff; |
| regs->idr1 = tmp >> 16; |
| regs->idr2 = 0; |
| regs->idr3 = 0; |
| regs->iar = H2_WRITE_ADDR(addr); |
| H2_INDIRECT_WAIT(regs); |
| } |
| |
| static void hal2_i_clearbit16(struct hal2_card *hal2, u16 addr, u16 bit) |
| { |
| struct hal2_ctl_regs *regs = hal2->ctl_regs; |
| |
| regs->iar = H2_READ_ADDR(addr); |
| H2_INDIRECT_WAIT(regs); |
| regs->idr0 = (regs->idr0 & 0xffff) & ~bit; |
| regs->idr1 = 0; |
| regs->idr2 = 0; |
| regs->idr3 = 0; |
| regs->iar = H2_WRITE_ADDR(addr); |
| H2_INDIRECT_WAIT(regs); |
| } |
| |
| #if 0 |
| static void hal2_i_clearbit32(struct hal2_card *hal2, u16 addr, u32 bit) |
| { |
| u32 tmp; |
| hal2_ctl_regs_t *regs = hal2->ctl_regs; |
| |
| regs->iar = H2_READ_ADDR(addr); |
| H2_INDIRECT_WAIT(regs); |
| tmp = ((regs->idr0 & 0xffff) | (regs->idr1 << 16)) & ~bit; |
| regs->idr0 = tmp & 0xffff; |
| regs->idr1 = tmp >> 16; |
| regs->idr2 = 0; |
| regs->idr3 = 0; |
| regs->iar = H2_WRITE_ADDR(addr); |
| H2_INDIRECT_WAIT(regs); |
| } |
| #endif |
| |
| #ifdef HAL2_DUMP_REGS |
| static void hal2_dump_regs(struct hal2_card *hal2) |
| { |
| DEBUG("isr: %08hx ", hal2_isr_look(hal2)); |
| DEBUG("rev: %08hx\n", hal2_rev_look(hal2)); |
| DEBUG("relay: %04hx\n", hal2_i_look16(hal2, H2I_RELAY_C)); |
| DEBUG("port en: %04hx ", hal2_i_look16(hal2, H2I_DMA_PORT_EN)); |
| DEBUG("dma end: %04hx ", hal2_i_look16(hal2, H2I_DMA_END)); |
| DEBUG("dma drv: %04hx\n", hal2_i_look16(hal2, H2I_DMA_DRV)); |
| DEBUG("syn ctl: %04hx ", hal2_i_look16(hal2, H2I_SYNTH_C)); |
| DEBUG("aesrx ctl: %04hx ", hal2_i_look16(hal2, H2I_AESRX_C)); |
| DEBUG("aestx ctl: %04hx ", hal2_i_look16(hal2, H2I_AESTX_C)); |
| DEBUG("dac ctl1: %04hx ", hal2_i_look16(hal2, H2I_ADC_C1)); |
| DEBUG("dac ctl2: %08x ", hal2_i_look32(hal2, H2I_ADC_C2)); |
| DEBUG("adc ctl1: %04hx ", hal2_i_look16(hal2, H2I_DAC_C1)); |
| DEBUG("adc ctl2: %08x ", hal2_i_look32(hal2, H2I_DAC_C2)); |
| DEBUG("syn map: %04hx\n", hal2_i_look16(hal2, H2I_SYNTH_MAP_C)); |
| DEBUG("bres1 ctl1: %04hx ", hal2_i_look16(hal2, H2I_BRES1_C1)); |
| DEBUG("bres1 ctl2: %04x ", hal2_i_look32(hal2, H2I_BRES1_C2)); |
| DEBUG("bres2 ctl1: %04hx ", hal2_i_look16(hal2, H2I_BRES2_C1)); |
| DEBUG("bres2 ctl2: %04x ", hal2_i_look32(hal2, H2I_BRES2_C2)); |
| DEBUG("bres3 ctl1: %04hx ", hal2_i_look16(hal2, H2I_BRES3_C1)); |
| DEBUG("bres3 ctl2: %04x\n", hal2_i_look32(hal2, H2I_BRES3_C2)); |
| } |
| #endif |
| |
| static struct hal2_card* hal2_dsp_find_card(int minor) |
| { |
| int i; |
| |
| for (i = 0; i < MAXCARDS; i++) |
| if (hal2_card[i] != NULL && hal2_card[i]->dev_dsp == minor) |
| return hal2_card[i]; |
| return NULL; |
| } |
| |
| static struct hal2_card* hal2_mixer_find_card(int minor) |
| { |
| int i; |
| |
| for (i = 0; i < MAXCARDS; i++) |
| if (hal2_card[i] != NULL && hal2_card[i]->dev_mixer == minor) |
| return hal2_card[i]; |
| return NULL; |
| } |
| |
| static void hal2_inc_head(struct hal2_codec *codec) |
| { |
| codec->head++; |
| if (codec->head == codec->desc_count) |
| codec->head = 0; |
| } |
| |
| static void hal2_inc_tail(struct hal2_codec *codec) |
| { |
| codec->tail++; |
| if (codec->tail == codec->desc_count) |
| codec->tail = 0; |
| } |
| |
| static void hal2_dac_interrupt(struct hal2_codec *dac) |
| { |
| int running; |
| |
| spin_lock(&dac->lock); |
| /* if tail buffer contains zero samples DMA stream was already |
| * stopped */ |
| running = dac->desc[dac->tail].cnt; |
| dac->desc[dac->tail].cnt = 0; |
| dac->desc[dac->tail].desc.cntinfo = HPCDMA_XIE | HPCDMA_EOX; |
| /* we just proccessed empty buffer, don't update tail pointer */ |
| if (running) |
| hal2_inc_tail(dac); |
| spin_unlock(&dac->lock); |
| |
| wake_up(&dac->dma_wait); |
| } |
| |
| static void hal2_adc_interrupt(struct hal2_codec *adc) |
| { |
| int running; |
| |
| spin_lock(&adc->lock); |
| /* if head buffer contains nonzero samples DMA stream was already |
| * stopped */ |
| running = !adc->desc[adc->head].cnt; |
| adc->desc[adc->head].cnt = H2_BLOCK_SIZE; |
| adc->desc[adc->head].desc.cntinfo = HPCDMA_XIE | HPCDMA_EOR; |
| /* we just proccessed empty buffer, don't update head pointer */ |
| if (running) |
| hal2_inc_head(adc); |
| spin_unlock(&adc->lock); |
| |
| wake_up(&adc->dma_wait); |
| } |
| |
| static irqreturn_t hal2_interrupt(int irq, void *dev_id) |
| { |
| struct hal2_card *hal2 = dev_id; |
| irqreturn_t ret = IRQ_NONE; |
| |
| /* decide what caused this interrupt */ |
| if (hal2->dac.pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_INT) { |
| hal2_dac_interrupt(&hal2->dac); |
| ret = IRQ_HANDLED; |
| } |
| if (hal2->adc.pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_INT) { |
| hal2_adc_interrupt(&hal2->adc); |
| ret = IRQ_HANDLED; |
| } |
| return ret; |
| } |
| |
| static int hal2_compute_rate(struct hal2_codec *codec, unsigned int rate) |
| { |
| unsigned short mod; |
| |
| DEBUG("rate: %d\n", rate); |
| |
| if (rate < 4000) rate = 4000; |
| else if (rate > 48000) rate = 48000; |
| |
| if (44100 % rate < 48000 % rate) { |
| mod = 4 * 44100 / rate; |
| codec->master = 44100; |
| } else { |
| mod = 4 * 48000 / rate; |
| codec->master = 48000; |
| } |
| |
| codec->inc = 4; |
| codec->mod = mod; |
| rate = 4 * codec->master / mod; |
| |
| DEBUG("real_rate: %d\n", rate); |
| |
| return rate; |
| } |
| |
| static void hal2_set_dac_rate(struct hal2_card *hal2) |
| { |
| unsigned int master = hal2->dac.master; |
| int inc = hal2->dac.inc; |
| int mod = hal2->dac.mod; |
| |
| DEBUG("master: %d inc: %d mod: %d\n", master, inc, mod); |
| |
| hal2_i_write16(hal2, H2I_BRES1_C1, (master == 44100) ? 1 : 0); |
| hal2_i_write32(hal2, H2I_BRES1_C2, ((0xffff & (inc - mod - 1)) << 16) | inc); |
| } |
| |
| static void hal2_set_adc_rate(struct hal2_card *hal2) |
| { |
| unsigned int master = hal2->adc.master; |
| int inc = hal2->adc.inc; |
| int mod = hal2->adc.mod; |
| |
| DEBUG("master: %d inc: %d mod: %d\n", master, inc, mod); |
| |
| hal2_i_write16(hal2, H2I_BRES2_C1, (master == 44100) ? 1 : 0); |
| hal2_i_write32(hal2, H2I_BRES2_C2, ((0xffff & (inc - mod - 1)) << 16) | inc); |
| } |
| |
| static void hal2_setup_dac(struct hal2_card *hal2) |
| { |
| unsigned int fifobeg, fifoend, highwater, sample_size; |
| struct hal2_pbus *pbus = &hal2->dac.pbus; |
| |
| DEBUG("hal2_setup_dac\n"); |
| |
| /* Now we set up some PBUS information. The PBUS needs information about |
| * what portion of the fifo it will use. If it's receiving or |
| * transmitting, and finally whether the stream is little endian or big |
| * endian. The information is written later, on the start call. |
| */ |
| sample_size = 2 * hal2->dac.voices; |
| /* Fifo should be set to hold exactly four samples. Highwater mark |
| * should be set to two samples. */ |
| highwater = (sample_size * 2) >> 1; /* halfwords */ |
| fifobeg = 0; /* playback is first */ |
| fifoend = (sample_size * 4) >> 3; /* doublewords */ |
| pbus->ctrl = HPC3_PDMACTRL_RT | HPC3_PDMACTRL_LD | |
| (highwater << 8) | (fifobeg << 16) | (fifoend << 24) | |
| (hal2->dac.format & AFMT_S16_LE ? HPC3_PDMACTRL_SEL : 0); |
| /* We disable everything before we do anything at all */ |
| pbus->pbus->pbdma_ctrl = HPC3_PDMACTRL_LD; |
| hal2_i_clearbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECTX); |
| /* Setup the HAL2 for playback */ |
| hal2_set_dac_rate(hal2); |
| /* Set endianess */ |
| if (hal2->dac.format & AFMT_S16_LE) |
| hal2_i_setbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECTX); |
| else |
| hal2_i_clearbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECTX); |
| /* Set DMA bus */ |
| hal2_i_setbit16(hal2, H2I_DMA_DRV, (1 << pbus->pbusnr)); |
| /* We are using 1st Bresenham clock generator for playback */ |
| hal2_i_write16(hal2, H2I_DAC_C1, (pbus->pbusnr << H2I_C1_DMA_SHIFT) |
| | (1 << H2I_C1_CLKID_SHIFT) |
| | (hal2->dac.voices << H2I_C1_DATAT_SHIFT)); |
| } |
| |
| static void hal2_setup_adc(struct hal2_card *hal2) |
| { |
| unsigned int fifobeg, fifoend, highwater, sample_size; |
| struct hal2_pbus *pbus = &hal2->adc.pbus; |
| |
| DEBUG("hal2_setup_adc\n"); |
| |
| sample_size = 2 * hal2->adc.voices; |
| highwater = (sample_size * 2) >> 1; /* halfwords */ |
| fifobeg = (4 * 4) >> 3; /* record is second */ |
| fifoend = (4 * 4 + sample_size * 4) >> 3; /* doublewords */ |
| pbus->ctrl = HPC3_PDMACTRL_RT | HPC3_PDMACTRL_RCV | HPC3_PDMACTRL_LD | |
| (highwater << 8) | (fifobeg << 16) | (fifoend << 24) | |
| (hal2->adc.format & AFMT_S16_LE ? HPC3_PDMACTRL_SEL : 0); |
| pbus->pbus->pbdma_ctrl = HPC3_PDMACTRL_LD; |
| hal2_i_clearbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECR); |
| /* Setup the HAL2 for record */ |
| hal2_set_adc_rate(hal2); |
| /* Set endianess */ |
| if (hal2->adc.format & AFMT_S16_LE) |
| hal2_i_setbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECR); |
| else |
| hal2_i_clearbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECR); |
| /* Set DMA bus */ |
| hal2_i_setbit16(hal2, H2I_DMA_DRV, (1 << pbus->pbusnr)); |
| /* We are using 2nd Bresenham clock generator for record */ |
| hal2_i_write16(hal2, H2I_ADC_C1, (pbus->pbusnr << H2I_C1_DMA_SHIFT) |
| | (2 << H2I_C1_CLKID_SHIFT) |
| | (hal2->adc.voices << H2I_C1_DATAT_SHIFT)); |
| } |
| |
| static dma_addr_t hal2_desc_addr(struct hal2_codec *codec, int i) |
| { |
| if (--i < 0) |
| i = codec->desc_count - 1; |
| return codec->desc[i].desc.pnext; |
| } |
| |
| static void hal2_start_dac(struct hal2_card *hal2) |
| { |
| struct hal2_codec *dac = &hal2->dac; |
| struct hal2_pbus *pbus = &dac->pbus; |
| |
| pbus->pbus->pbdma_dptr = hal2_desc_addr(dac, dac->tail); |
| pbus->pbus->pbdma_ctrl = pbus->ctrl | HPC3_PDMACTRL_ACT; |
| /* enable DAC */ |
| hal2_i_setbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECTX); |
| } |
| |
| static void hal2_start_adc(struct hal2_card *hal2) |
| { |
| struct hal2_codec *adc = &hal2->adc; |
| struct hal2_pbus *pbus = &adc->pbus; |
| |
| pbus->pbus->pbdma_dptr = hal2_desc_addr(adc, adc->head); |
| pbus->pbus->pbdma_ctrl = pbus->ctrl | HPC3_PDMACTRL_ACT; |
| /* enable ADC */ |
| hal2_i_setbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECR); |
| } |
| |
| static inline void hal2_stop_dac(struct hal2_card *hal2) |
| { |
| hal2->dac.pbus.pbus->pbdma_ctrl = HPC3_PDMACTRL_LD; |
| /* The HAL2 itself may remain enabled safely */ |
| } |
| |
| static inline void hal2_stop_adc(struct hal2_card *hal2) |
| { |
| hal2->adc.pbus.pbus->pbdma_ctrl = HPC3_PDMACTRL_LD; |
| } |
| |
| static int hal2_alloc_dmabuf(struct hal2_codec *codec, int size, |
| int count, int cntinfo, int dir) |
| { |
| struct hal2_desc *desc, *dma_addr; |
| int i; |
| |
| DEBUG("allocating %dk DMA buffer.\n", size / 1024); |
| |
| codec->buffer = (unsigned char *)__get_free_pages(GFP_KERNEL | GFP_DMA, |
| get_order(size)); |
| if (!codec->buffer) |
| return -ENOMEM; |
| desc = dma_alloc_coherent(NULL, count * sizeof(struct hal2_desc), |
| (dma_addr_t *)&dma_addr, GFP_KERNEL); |
| if (!desc) { |
| free_pages((unsigned long)codec->buffer, get_order(size)); |
| return -ENOMEM; |
| } |
| codec->desc = desc; |
| for (i = 0; i < count; i++) { |
| desc->desc.pbuf = dma_map_single(NULL, |
| (void *)(codec->buffer + i * H2_BLOCK_SIZE), |
| H2_BLOCK_SIZE, dir); |
| desc->desc.cntinfo = cntinfo; |
| desc->desc.pnext = (i == count - 1) ? |
| (u32)dma_addr : (u32)(dma_addr + i + 1); |
| desc->cnt = 0; |
| desc++; |
| } |
| codec->desc_count = count; |
| codec->head = codec->tail = 0; |
| return 0; |
| } |
| |
| static int hal2_alloc_dac_dmabuf(struct hal2_codec *codec) |
| { |
| return hal2_alloc_dmabuf(codec, H2_DAC_BUFSIZE, |
| H2_DAC_BUFSIZE / H2_BLOCK_SIZE, |
| HPCDMA_XIE | HPCDMA_EOX, |
| DMA_TO_DEVICE); |
| } |
| |
| static int hal2_alloc_adc_dmabuf(struct hal2_codec *codec) |
| { |
| return hal2_alloc_dmabuf(codec, H2_ADC_BUFSIZE, |
| H2_ADC_BUFSIZE / H2_BLOCK_SIZE, |
| HPCDMA_XIE | H2_BLOCK_SIZE, |
| DMA_TO_DEVICE); |
| } |
| |
| static void hal2_free_dmabuf(struct hal2_codec *codec, int size, int dir) |
| { |
| dma_addr_t dma_addr; |
| int i; |
| |
| dma_addr = codec->desc[codec->desc_count - 1].desc.pnext; |
| for (i = 0; i < codec->desc_count; i++) |
| dma_unmap_single(NULL, codec->desc[i].desc.pbuf, |
| H2_BLOCK_SIZE, dir); |
| dma_free_coherent(NULL, codec->desc_count * sizeof(struct hal2_desc), |
| (void *)codec->desc, dma_addr); |
| free_pages((unsigned long)codec->buffer, get_order(size)); |
| } |
| |
| static void hal2_free_dac_dmabuf(struct hal2_codec *codec) |
| { |
| return hal2_free_dmabuf(codec, H2_DAC_BUFSIZE, DMA_TO_DEVICE); |
| } |
| |
| static void hal2_free_adc_dmabuf(struct hal2_codec *codec) |
| { |
| return hal2_free_dmabuf(codec, H2_ADC_BUFSIZE, DMA_FROM_DEVICE); |
| } |
| |
| /* |
| * Add 'count' bytes to 'buffer' from DMA ring buffers. Return number of |
| * bytes added or -EFAULT if copy_from_user failed. |
| */ |
| static int hal2_get_buffer(struct hal2_card *hal2, char *buffer, int count) |
| { |
| unsigned long flags; |
| int size, ret = 0; |
| unsigned char *buf; |
| struct hal2_desc *tail; |
| struct hal2_codec *adc = &hal2->adc; |
| |
| DEBUG("getting %d bytes ", count); |
| |
| spin_lock_irqsave(&adc->lock, flags); |
| tail = &adc->desc[adc->tail]; |
| /* enable DMA stream if there are no data */ |
| if (!tail->cnt && !(adc->pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_ISACT)) |
| hal2_start_adc(hal2); |
| while (tail->cnt > 0 && count > 0) { |
| size = min((int)tail->cnt, count); |
| buf = &adc->buffer[(adc->tail + 1) * H2_BLOCK_SIZE - tail->cnt]; |
| spin_unlock_irqrestore(&adc->lock, flags); |
| dma_sync_single(NULL, tail->desc.pbuf, size, DMA_FROM_DEVICE); |
| if (copy_to_user(buffer, buf, size)) { |
| ret = -EFAULT; |
| goto out; |
| } |
| spin_lock_irqsave(&adc->lock, flags); |
| tail->cnt -= size; |
| /* buffer is empty, update tail pointer */ |
| if (tail->cnt == 0) { |
| tail->desc.cntinfo = HPCDMA_XIE | H2_BLOCK_SIZE; |
| hal2_inc_tail(adc); |
| tail = &adc->desc[adc->tail]; |
| /* enable DMA stream again if needed */ |
| if (!(adc->pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_ISACT)) |
| hal2_start_adc(hal2); |
| } |
| buffer += size; |
| ret += size; |
| count -= size; |
| |
| DEBUG("(%d) ", size); |
| } |
| spin_unlock_irqrestore(&adc->lock, flags); |
| out: |
| DEBUG("\n"); |
| |
| return ret; |
| } |
| |
| /* |
| * Add 'count' bytes from 'buffer' to DMA ring buffers. Return number of |
| * bytes added or -EFAULT if copy_from_user failed. |
| */ |
| static int hal2_add_buffer(struct hal2_card *hal2, char *buffer, int count) |
| { |
| unsigned long flags; |
| unsigned char *buf; |
| int size, ret = 0; |
| struct hal2_desc *head; |
| struct hal2_codec *dac = &hal2->dac; |
| |
| DEBUG("adding %d bytes ", count); |
| |
| spin_lock_irqsave(&dac->lock, flags); |
| head = &dac->desc[dac->head]; |
| while (head->cnt == 0 && count > 0) { |
| size = min((int)H2_BLOCK_SIZE, count); |
| buf = &dac->buffer[dac->head * H2_BLOCK_SIZE]; |
| spin_unlock_irqrestore(&dac->lock, flags); |
| if (copy_from_user(buf, buffer, size)) { |
| ret = -EFAULT; |
| goto out; |
| } |
| dma_sync_single(NULL, head->desc.pbuf, size, DMA_TO_DEVICE); |
| spin_lock_irqsave(&dac->lock, flags); |
| head->desc.cntinfo = size | HPCDMA_XIE; |
| head->cnt = size; |
| buffer += size; |
| ret += size; |
| count -= size; |
| hal2_inc_head(dac); |
| head = &dac->desc[dac->head]; |
| |
| DEBUG("(%d) ", size); |
| } |
| if (!(dac->pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_ISACT) && ret > 0) |
| hal2_start_dac(hal2); |
| spin_unlock_irqrestore(&dac->lock, flags); |
| out: |
| DEBUG("\n"); |
| |
| return ret; |
| } |
| |
| #define hal2_reset_dac_pointer(hal2) hal2_reset_pointer(hal2, 1) |
| #define hal2_reset_adc_pointer(hal2) hal2_reset_pointer(hal2, 0) |
| static void hal2_reset_pointer(struct hal2_card *hal2, int is_dac) |
| { |
| int i; |
| struct hal2_codec *codec = (is_dac) ? &hal2->dac : &hal2->adc; |
| |
| DEBUG("hal2_reset_pointer\n"); |
| |
| for (i = 0; i < codec->desc_count; i++) { |
| codec->desc[i].cnt = 0; |
| codec->desc[i].desc.cntinfo = HPCDMA_XIE | (is_dac) ? |
| HPCDMA_EOX : H2_BLOCK_SIZE; |
| } |
| codec->head = codec->tail = 0; |
| } |
| |
| static int hal2_sync_dac(struct hal2_card *hal2) |
| { |
| DECLARE_WAITQUEUE(wait, current); |
| struct hal2_codec *dac = &hal2->dac; |
| int ret = 0; |
| unsigned long flags; |
| signed long timeout = 1000 * H2_BLOCK_SIZE * 2 * dac->voices * |
| HZ / dac->sample_rate / 900; |
| |
| while (dac->pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_ISACT) { |
| add_wait_queue(&dac->dma_wait, &wait); |
| set_current_state(TASK_INTERRUPTIBLE); |
| schedule_timeout(timeout); |
| spin_lock_irqsave(&dac->lock, flags); |
| if (dac->desc[dac->tail].cnt) |
| ret = -ETIME; |
| spin_unlock_irqrestore(&dac->lock, flags); |
| if (signal_pending(current)) |
| ret = -ERESTARTSYS; |
| if (ret) { |
| hal2_stop_dac(hal2); |
| hal2_reset_dac_pointer(hal2); |
| } |
| remove_wait_queue(&dac->dma_wait, &wait); |
| } |
| |
| return ret; |
| } |
| |
| static int hal2_write_mixer(struct hal2_card *hal2, int index, int vol) |
| { |
| unsigned int l, r, tmp; |
| |
| DEBUG_MIX("mixer %d write\n", index); |
| |
| if (index >= SOUND_MIXER_NRDEVICES || !mixtable[index].avail) |
| return -EINVAL; |
| |
| r = (vol >> 8) & 0xff; |
| if (r > 100) |
| r = 100; |
| l = vol & 0xff; |
| if (l > 100) |
| l = 100; |
| |
| hal2->mixer.volume[mixtable[index].idx] = l | (r << 8); |
| |
| switch (mixtable[index].idx) { |
| case H2_MIX_OUTPUT_ATT: |
| |
| DEBUG_MIX("output attenuator %d,%d\n", l, r); |
| |
| if (r | l) { |
| tmp = hal2_i_look32(hal2, H2I_DAC_C2); |
| tmp &= ~(H2I_C2_L_ATT_M | H2I_C2_R_ATT_M | H2I_C2_MUTE); |
| |
| /* Attenuator has five bits */ |
| l = 31 * (100 - l) / 99; |
| r = 31 * (100 - r) / 99; |
| |
| DEBUG_MIX("left: %d, right %d\n", l, r); |
| |
| tmp |= (l << H2I_C2_L_ATT_SHIFT) & H2I_C2_L_ATT_M; |
| tmp |= (r << H2I_C2_R_ATT_SHIFT) & H2I_C2_R_ATT_M; |
| hal2_i_write32(hal2, H2I_DAC_C2, tmp); |
| } else |
| hal2_i_setbit32(hal2, H2I_DAC_C2, H2I_C2_MUTE); |
| break; |
| case H2_MIX_INPUT_GAIN: |
| |
| DEBUG_MIX("input gain %d,%d\n", l, r); |
| |
| tmp = hal2_i_look32(hal2, H2I_ADC_C2); |
| tmp &= ~(H2I_C2_L_GAIN_M | H2I_C2_R_GAIN_M); |
| |
| /* Gain control has four bits */ |
| l = 16 * l / 100; |
| r = 16 * r / 100; |
| |
| DEBUG_MIX("left: %d, right %d\n", l, r); |
| |
| tmp |= (l << H2I_C2_L_GAIN_SHIFT) & H2I_C2_L_GAIN_M; |
| tmp |= (r << H2I_C2_R_GAIN_SHIFT) & H2I_C2_R_GAIN_M; |
| hal2_i_write32(hal2, H2I_ADC_C2, tmp); |
| |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static void hal2_init_mixer(struct hal2_card *hal2) |
| { |
| int i; |
| |
| for (i = 0; i < SOUND_MIXER_NRDEVICES; i++) |
| if (mixtable[i].avail) |
| hal2->mixer.volume[mixtable[i].idx] = 100 | (100 << 8); |
| |
| /* disable attenuator */ |
| hal2_i_write32(hal2, H2I_DAC_C2, 0); |
| /* set max input gain */ |
| hal2_i_write32(hal2, H2I_ADC_C2, H2I_C2_MUTE | |
| (H2I_C2_L_GAIN_M << H2I_C2_L_GAIN_SHIFT) | |
| (H2I_C2_R_GAIN_M << H2I_C2_R_GAIN_SHIFT)); |
| /* set max volume */ |
| hal2->mixer.master = 0xff; |
| hal2->vol_regs->left = 0xff; |
| hal2->vol_regs->right = 0xff; |
| } |
| |
| /* |
| * XXX: later i'll implement mixer for main volume which will be disabled |
| * by default. enabling it users will be allowed to have master volume level |
| * control on panel in their favourite X desktop |
| */ |
| static void hal2_volume_control(int direction) |
| { |
| unsigned int master = hal2_card[0]->mixer.master; |
| struct hal2_vol_regs *vol = hal2_card[0]->vol_regs; |
| |
| /* volume up */ |
| if (direction > 0 && master < 0xff) |
| master++; |
| /* volume down */ |
| else if (direction < 0 && master > 0) |
| master--; |
| /* TODO: mute/unmute */ |
| vol->left = master; |
| vol->right = master; |
| hal2_card[0]->mixer.master = master; |
| } |
| |
| static int hal2_mixer_ioctl(struct hal2_card *hal2, unsigned int cmd, |
| unsigned long arg) |
| { |
| int val; |
| |
| if (cmd == SOUND_MIXER_INFO) { |
| mixer_info info; |
| |
| memset(&info, 0, sizeof(info)); |
| strlcpy(info.id, hal2str, sizeof(info.id)); |
| strlcpy(info.name, hal2str, sizeof(info.name)); |
| info.modify_counter = hal2->mixer.modcnt; |
| if (copy_to_user((void *)arg, &info, sizeof(info))) |
| return -EFAULT; |
| return 0; |
| } |
| if (cmd == SOUND_OLD_MIXER_INFO) { |
| _old_mixer_info info; |
| |
| memset(&info, 0, sizeof(info)); |
| strlcpy(info.id, hal2str, sizeof(info.id)); |
| strlcpy(info.name, hal2str, sizeof(info.name)); |
| if (copy_to_user((void *)arg, &info, sizeof(info))) |
| return -EFAULT; |
| return 0; |
| } |
| if (cmd == OSS_GETVERSION) |
| return put_user(SOUND_VERSION, (int *)arg); |
| |
| if (_IOC_TYPE(cmd) != 'M' || _IOC_SIZE(cmd) != sizeof(int)) |
| return -EINVAL; |
| |
| if (_IOC_DIR(cmd) == _IOC_READ) { |
| switch (_IOC_NR(cmd)) { |
| /* Give the current record source */ |
| case SOUND_MIXER_RECSRC: |
| val = 0; /* FIXME */ |
| break; |
| /* Give the supported mixers, all of them support stereo */ |
| case SOUND_MIXER_DEVMASK: |
| case SOUND_MIXER_STEREODEVS: { |
| int i; |
| |
| for (val = i = 0; i < SOUND_MIXER_NRDEVICES; i++) |
| if (mixtable[i].avail) |
| val |= 1 << i; |
| break; |
| } |
| /* Arg contains a bit for each supported recording source */ |
| case SOUND_MIXER_RECMASK: |
| val = 0; |
| break; |
| case SOUND_MIXER_CAPS: |
| val = 0; |
| break; |
| /* Read a specific mixer */ |
| default: { |
| int i = _IOC_NR(cmd); |
| |
| if (i >= SOUND_MIXER_NRDEVICES || !mixtable[i].avail) |
| return -EINVAL; |
| val = hal2->mixer.volume[mixtable[i].idx]; |
| break; |
| } |
| } |
| return put_user(val, (int *)arg); |
| } |
| |
| if (_IOC_DIR(cmd) != (_IOC_WRITE|_IOC_READ)) |
| return -EINVAL; |
| |
| hal2->mixer.modcnt++; |
| |
| if (get_user(val, (int *)arg)) |
| return -EFAULT; |
| |
| switch (_IOC_NR(cmd)) { |
| /* Arg contains a bit for each recording source */ |
| case SOUND_MIXER_RECSRC: |
| return 0; /* FIXME */ |
| default: |
| return hal2_write_mixer(hal2, _IOC_NR(cmd), val); |
| } |
| |
| return 0; |
| } |
| |
| static int hal2_open_mixdev(struct inode *inode, struct file *file) |
| { |
| struct hal2_card *hal2 = hal2_mixer_find_card(iminor(inode)); |
| |
| if (hal2) { |
| file->private_data = hal2; |
| return nonseekable_open(inode, file); |
| } |
| return -ENODEV; |
| } |
| |
| static int hal2_release_mixdev(struct inode *inode, struct file *file) |
| { |
| return 0; |
| } |
| |
| static int hal2_ioctl_mixdev(struct inode *inode, struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| return hal2_mixer_ioctl((struct hal2_card *)file->private_data, cmd, arg); |
| } |
| |
| static int hal2_ioctl(struct inode *inode, struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| int val; |
| struct hal2_card *hal2 = (struct hal2_card *) file->private_data; |
| |
| switch (cmd) { |
| case OSS_GETVERSION: |
| return put_user(SOUND_VERSION, (int *)arg); |
| |
| case SNDCTL_DSP_SYNC: |
| if (file->f_mode & FMODE_WRITE) |
| return hal2_sync_dac(hal2); |
| return 0; |
| |
| case SNDCTL_DSP_SETDUPLEX: |
| return 0; |
| |
| case SNDCTL_DSP_GETCAPS: |
| return put_user(DSP_CAP_DUPLEX | DSP_CAP_MULTI, (int *)arg); |
| |
| case SNDCTL_DSP_RESET: |
| if (file->f_mode & FMODE_READ) { |
| hal2_stop_adc(hal2); |
| hal2_reset_adc_pointer(hal2); |
| } |
| if (file->f_mode & FMODE_WRITE) { |
| hal2_stop_dac(hal2); |
| hal2_reset_dac_pointer(hal2); |
| } |
| return 0; |
| |
| case SNDCTL_DSP_SPEED: |
| if (get_user(val, (int *)arg)) |
| return -EFAULT; |
| if (file->f_mode & FMODE_READ) { |
| hal2_stop_adc(hal2); |
| val = hal2_compute_rate(&hal2->adc, val); |
| hal2->adc.sample_rate = val; |
| hal2_set_adc_rate(hal2); |
| } |
| if (file->f_mode & FMODE_WRITE) { |
| hal2_stop_dac(hal2); |
| val = hal2_compute_rate(&hal2->dac, val); |
| hal2->dac.sample_rate = val; |
| hal2_set_dac_rate(hal2); |
| } |
| return put_user(val, (int *)arg); |
| |
| case SNDCTL_DSP_STEREO: |
| if (get_user(val, (int *)arg)) |
| return -EFAULT; |
| if (file->f_mode & FMODE_READ) { |
| hal2_stop_adc(hal2); |
| hal2->adc.voices = (val) ? 2 : 1; |
| hal2_setup_adc(hal2); |
| } |
| if (file->f_mode & FMODE_WRITE) { |
| hal2_stop_dac(hal2); |
| hal2->dac.voices = (val) ? 2 : 1; |
| hal2_setup_dac(hal2); |
| } |
| return 0; |
| |
| case SNDCTL_DSP_CHANNELS: |
| if (get_user(val, (int *)arg)) |
| return -EFAULT; |
| if (val != 0) { |
| if (file->f_mode & FMODE_READ) { |
| hal2_stop_adc(hal2); |
| hal2->adc.voices = (val == 1) ? 1 : 2; |
| hal2_setup_adc(hal2); |
| } |
| if (file->f_mode & FMODE_WRITE) { |
| hal2_stop_dac(hal2); |
| hal2->dac.voices = (val == 1) ? 1 : 2; |
| hal2_setup_dac(hal2); |
| } |
| } |
| val = -EINVAL; |
| if (file->f_mode & FMODE_READ) |
| val = hal2->adc.voices; |
| if (file->f_mode & FMODE_WRITE) |
| val = hal2->dac.voices; |
| return put_user(val, (int *)arg); |
| |
| case SNDCTL_DSP_GETFMTS: /* Returns a mask */ |
| return put_user(H2_SUPPORTED_FORMATS, (int *)arg); |
| |
| case SNDCTL_DSP_SETFMT: /* Selects ONE fmt*/ |
| if (get_user(val, (int *)arg)) |
| return -EFAULT; |
| if (val != AFMT_QUERY) { |
| if (!(val & H2_SUPPORTED_FORMATS)) |
| return -EINVAL; |
| if (file->f_mode & FMODE_READ) { |
| hal2_stop_adc(hal2); |
| hal2->adc.format = val; |
| hal2_setup_adc(hal2); |
| } |
| if (file->f_mode & FMODE_WRITE) { |
| hal2_stop_dac(hal2); |
| hal2->dac.format = val; |
| hal2_setup_dac(hal2); |
| } |
| } else { |
| val = -EINVAL; |
| if (file->f_mode & FMODE_READ) |
| val = hal2->adc.format; |
| if (file->f_mode & FMODE_WRITE) |
| val = hal2->dac.format; |
| } |
| return put_user(val, (int *)arg); |
| |
| case SNDCTL_DSP_POST: |
| return 0; |
| |
| case SNDCTL_DSP_GETOSPACE: { |
| audio_buf_info info; |
| int i; |
| unsigned long flags; |
| struct hal2_codec *dac = &hal2->dac; |
| |
| if (!(file->f_mode & FMODE_WRITE)) |
| return -EINVAL; |
| info.fragments = 0; |
| spin_lock_irqsave(&dac->lock, flags); |
| for (i = 0; i < dac->desc_count; i++) |
| if (dac->desc[i].cnt == 0) |
| info.fragments++; |
| spin_unlock_irqrestore(&dac->lock, flags); |
| info.fragstotal = dac->desc_count; |
| info.fragsize = H2_BLOCK_SIZE; |
| info.bytes = info.fragsize * info.fragments; |
| |
| return copy_to_user((void *)arg, &info, sizeof(info)) ? -EFAULT : 0; |
| } |
| |
| case SNDCTL_DSP_GETISPACE: { |
| audio_buf_info info; |
| int i; |
| unsigned long flags; |
| struct hal2_codec *adc = &hal2->adc; |
| |
| if (!(file->f_mode & FMODE_READ)) |
| return -EINVAL; |
| info.fragments = 0; |
| info.bytes = 0; |
| spin_lock_irqsave(&adc->lock, flags); |
| for (i = 0; i < adc->desc_count; i++) |
| if (adc->desc[i].cnt > 0) { |
| info.fragments++; |
| info.bytes += adc->desc[i].cnt; |
| } |
| spin_unlock_irqrestore(&adc->lock, flags); |
| info.fragstotal = adc->desc_count; |
| info.fragsize = H2_BLOCK_SIZE; |
| |
| return copy_to_user((void *)arg, &info, sizeof(info)) ? -EFAULT : 0; |
| } |
| |
| case SNDCTL_DSP_NONBLOCK: |
| file->f_flags |= O_NONBLOCK; |
| return 0; |
| |
| case SNDCTL_DSP_GETBLKSIZE: |
| return put_user(H2_BLOCK_SIZE, (int *)arg); |
| |
| case SNDCTL_DSP_SETFRAGMENT: |
| return 0; |
| |
| case SOUND_PCM_READ_RATE: |
| val = -EINVAL; |
| if (file->f_mode & FMODE_READ) |
| val = hal2->adc.sample_rate; |
| if (file->f_mode & FMODE_WRITE) |
| val = hal2->dac.sample_rate; |
| return put_user(val, (int *)arg); |
| |
| case SOUND_PCM_READ_CHANNELS: |
| val = -EINVAL; |
| if (file->f_mode & FMODE_READ) |
| val = hal2->adc.voices; |
| if (file->f_mode & FMODE_WRITE) |
| val = hal2->dac.voices; |
| return put_user(val, (int *)arg); |
| |
| case SOUND_PCM_READ_BITS: |
| return put_user(16, (int *)arg); |
| } |
| |
| return hal2_mixer_ioctl(hal2, cmd, arg); |
| } |
| |
| static ssize_t hal2_read(struct file *file, char *buffer, |
| size_t count, loff_t *ppos) |
| { |
| ssize_t err; |
| struct hal2_card *hal2 = (struct hal2_card *) file->private_data; |
| struct hal2_codec *adc = &hal2->adc; |
| |
| if (!count) |
| return 0; |
| if (mutex_lock_interruptible(&adc->sem)) |
| return -EINTR; |
| if (file->f_flags & O_NONBLOCK) { |
| err = hal2_get_buffer(hal2, buffer, count); |
| err = err == 0 ? -EAGAIN : err; |
| } else { |
| do { |
| /* ~10% longer */ |
| signed long timeout = 1000 * H2_BLOCK_SIZE * |
| 2 * adc->voices * HZ / adc->sample_rate / 900; |
| unsigned long flags; |
| DECLARE_WAITQUEUE(wait, current); |
| ssize_t cnt = 0; |
| |
| err = hal2_get_buffer(hal2, buffer, count); |
| if (err > 0) { |
| count -= err; |
| cnt += err; |
| buffer += err; |
| err = cnt; |
| } |
| if (count > 0 && err >= 0) { |
| add_wait_queue(&adc->dma_wait, &wait); |
| set_current_state(TASK_INTERRUPTIBLE); |
| schedule_timeout(timeout); |
| spin_lock_irqsave(&adc->lock, flags); |
| if (!adc->desc[adc->tail].cnt) |
| err = -EAGAIN; |
| spin_unlock_irqrestore(&adc->lock, flags); |
| if (signal_pending(current)) |
| err = -ERESTARTSYS; |
| remove_wait_queue(&adc->dma_wait, &wait); |
| if (err < 0) { |
| hal2_stop_adc(hal2); |
| hal2_reset_adc_pointer(hal2); |
| } |
| } |
| } while (count > 0 && err >= 0); |
| } |
| mutex_unlock(&adc->sem); |
| |
| return err; |
| } |
| |
| static ssize_t hal2_write(struct file *file, const char *buffer, |
| size_t count, loff_t *ppos) |
| { |
| ssize_t err; |
| char *buf = (char*) buffer; |
| struct hal2_card *hal2 = (struct hal2_card *) file->private_data; |
| struct hal2_codec *dac = &hal2->dac; |
| |
| if (!count) |
| return 0; |
| if (mutex_lock_interruptible(&dac->sem)) |
| return -EINTR; |
| if (file->f_flags & O_NONBLOCK) { |
| err = hal2_add_buffer(hal2, buf, count); |
| err = err == 0 ? -EAGAIN : err; |
| } else { |
| do { |
| /* ~10% longer */ |
| signed long timeout = 1000 * H2_BLOCK_SIZE * |
| 2 * dac->voices * HZ / dac->sample_rate / 900; |
| unsigned long flags; |
| DECLARE_WAITQUEUE(wait, current); |
| ssize_t cnt = 0; |
| |
| err = hal2_add_buffer(hal2, buf, count); |
| if (err > 0) { |
| count -= err; |
| cnt += err; |
| buf += err; |
| err = cnt; |
| } |
| if (count > 0 && err >= 0) { |
| add_wait_queue(&dac->dma_wait, &wait); |
| set_current_state(TASK_INTERRUPTIBLE); |
| schedule_timeout(timeout); |
| spin_lock_irqsave(&dac->lock, flags); |
| if (dac->desc[dac->head].cnt) |
| err = -EAGAIN; |
| spin_unlock_irqrestore(&dac->lock, flags); |
| if (signal_pending(current)) |
| err = -ERESTARTSYS; |
| remove_wait_queue(&dac->dma_wait, &wait); |
| if (err < 0) { |
| hal2_stop_dac(hal2); |
| hal2_reset_dac_pointer(hal2); |
| } |
| } |
| } while (count > 0 && err >= 0); |
| } |
| mutex_unlock(&dac->sem); |
| |
| return err; |
| } |
| |
| static unsigned int hal2_poll(struct file *file, struct poll_table_struct *wait) |
| { |
| unsigned long flags; |
| unsigned int mask = 0; |
| struct hal2_card *hal2 = (struct hal2_card *) file->private_data; |
| |
| if (file->f_mode & FMODE_READ) { |
| struct hal2_codec *adc = &hal2->adc; |
| |
| poll_wait(file, &adc->dma_wait, wait); |
| spin_lock_irqsave(&adc->lock, flags); |
| if (adc->desc[adc->tail].cnt > 0) |
| mask |= POLLIN; |
| spin_unlock_irqrestore(&adc->lock, flags); |
| } |
| |
| if (file->f_mode & FMODE_WRITE) { |
| struct hal2_codec *dac = &hal2->dac; |
| |
| poll_wait(file, &dac->dma_wait, wait); |
| spin_lock_irqsave(&dac->lock, flags); |
| if (dac->desc[dac->head].cnt == 0) |
| mask |= POLLOUT; |
| spin_unlock_irqrestore(&dac->lock, flags); |
| } |
| |
| return mask; |
| } |
| |
| static int hal2_open(struct inode *inode, struct file *file) |
| { |
| int err; |
| struct hal2_card *hal2 = hal2_dsp_find_card(iminor(inode)); |
| |
| if (!hal2) |
| return -ENODEV; |
| file->private_data = hal2; |
| if (file->f_mode & FMODE_READ) { |
| struct hal2_codec *adc = &hal2->adc; |
| |
| if (adc->usecount) |
| return -EBUSY; |
| /* OSS spec wanted us to use 8 bit, 8 kHz mono by default, |
| * but HAL2 can't do 8bit audio */ |
| adc->format = AFMT_S16_BE; |
| adc->voices = 1; |
| adc->sample_rate = hal2_compute_rate(adc, 8000); |
| hal2_set_adc_rate(hal2); |
| err = hal2_alloc_adc_dmabuf(adc); |
| if (err) |
| return err; |
| hal2_setup_adc(hal2); |
| adc->usecount++; |
| } |
| if (file->f_mode & FMODE_WRITE) { |
| struct hal2_codec *dac = &hal2->dac; |
| |
| if (dac->usecount) |
| return -EBUSY; |
| dac->format = AFMT_S16_BE; |
| dac->voices = 1; |
| dac->sample_rate = hal2_compute_rate(dac, 8000); |
| hal2_set_dac_rate(hal2); |
| err = hal2_alloc_dac_dmabuf(dac); |
| if (err) |
| return err; |
| hal2_setup_dac(hal2); |
| dac->usecount++; |
| } |
| |
| return nonseekable_open(inode, file); |
| } |
| |
| static int hal2_release(struct inode *inode, struct file *file) |
| { |
| struct hal2_card *hal2 = (struct hal2_card *) file->private_data; |
| |
| if (file->f_mode & FMODE_READ) { |
| struct hal2_codec *adc = &hal2->adc; |
| |
| mutex_lock(&adc->sem); |
| hal2_stop_adc(hal2); |
| hal2_free_adc_dmabuf(adc); |
| adc->usecount--; |
| mutex_unlock(&adc->sem); |
| } |
| if (file->f_mode & FMODE_WRITE) { |
| struct hal2_codec *dac = &hal2->dac; |
| |
| mutex_lock(&dac->sem); |
| hal2_sync_dac(hal2); |
| hal2_free_dac_dmabuf(dac); |
| dac->usecount--; |
| mutex_unlock(&dac->sem); |
| } |
| |
| return 0; |
| } |
| |
| static const struct file_operations hal2_audio_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .read = hal2_read, |
| .write = hal2_write, |
| .poll = hal2_poll, |
| .ioctl = hal2_ioctl, |
| .open = hal2_open, |
| .release = hal2_release, |
| }; |
| |
| static const struct file_operations hal2_mixer_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .ioctl = hal2_ioctl_mixdev, |
| .open = hal2_open_mixdev, |
| .release = hal2_release_mixdev, |
| }; |
| |
| static void hal2_init_codec(struct hal2_codec *codec, struct hpc3_regs *hpc3, |
| int index) |
| { |
| codec->pbus.pbusnr = index; |
| codec->pbus.pbus = &hpc3->pbdma[index]; |
| init_waitqueue_head(&codec->dma_wait); |
| mutex_init(&codec->sem); |
| spin_lock_init(&codec->lock); |
| } |
| |
| static int hal2_detect(struct hal2_card *hal2) |
| { |
| unsigned short board, major, minor; |
| unsigned short rev; |
| |
| /* reset HAL2 */ |
| hal2_isr_write(hal2, 0); |
| /* release reset */ |
| hal2_isr_write(hal2, H2_ISR_GLOBAL_RESET_N | H2_ISR_CODEC_RESET_N); |
| |
| hal2_i_write16(hal2, H2I_RELAY_C, H2I_RELAY_C_STATE); |
| if ((rev = hal2_rev_look(hal2)) & H2_REV_AUDIO_PRESENT) |
| return -ENODEV; |
| |
| board = (rev & H2_REV_BOARD_M) >> 12; |
| major = (rev & H2_REV_MAJOR_CHIP_M) >> 4; |
| minor = (rev & H2_REV_MINOR_CHIP_M); |
| |
| printk(KERN_INFO "SGI HAL2 revision %i.%i.%i\n", |
| board, major, minor); |
| |
| return 0; |
| } |
| |
| static int hal2_init_card(struct hal2_card **phal2, struct hpc3_regs *hpc3) |
| { |
| int ret = 0; |
| struct hal2_card *hal2; |
| |
| hal2 = kzalloc(sizeof(struct hal2_card), GFP_KERNEL); |
| if (!hal2) |
| return -ENOMEM; |
| |
| hal2->ctl_regs = (struct hal2_ctl_regs *)hpc3->pbus_extregs[0]; |
| hal2->aes_regs = (struct hal2_aes_regs *)hpc3->pbus_extregs[1]; |
| hal2->vol_regs = (struct hal2_vol_regs *)hpc3->pbus_extregs[2]; |
| hal2->syn_regs = (struct hal2_syn_regs *)hpc3->pbus_extregs[3]; |
| |
| if (hal2_detect(hal2) < 0) { |
| ret = -ENODEV; |
| goto free_card; |
| } |
| |
| hal2_init_codec(&hal2->dac, hpc3, 0); |
| hal2_init_codec(&hal2->adc, hpc3, 1); |
| |
| /* |
| * All DMA channel interfaces in HAL2 are designed to operate with |
| * PBUS programmed for 2 cycles in D3, 2 cycles in D4 and 2 cycles |
| * in D5. HAL2 is a 16-bit device which can accept both big and little |
| * endian format. It assumes that even address bytes are on high |
| * portion of PBUS (15:8) and assumes that HPC3 is programmed to |
| * accept a live (unsynchronized) version of P_DREQ_N from HAL2. |
| */ |
| #define HAL2_PBUS_DMACFG ((0 << HPC3_DMACFG_D3R_SHIFT) | \ |
| (2 << HPC3_DMACFG_D4R_SHIFT) | \ |
| (2 << HPC3_DMACFG_D5R_SHIFT) | \ |
| (0 << HPC3_DMACFG_D3W_SHIFT) | \ |
| (2 << HPC3_DMACFG_D4W_SHIFT) | \ |
| (2 << HPC3_DMACFG_D5W_SHIFT) | \ |
| HPC3_DMACFG_DS16 | \ |
| HPC3_DMACFG_EVENHI | \ |
| HPC3_DMACFG_RTIME | \ |
| (8 << HPC3_DMACFG_BURST_SHIFT) | \ |
| HPC3_DMACFG_DRQLIVE) |
| /* |
| * Ignore what's mentioned in the specification and write value which |
| * works in The Real World (TM) |
| */ |
| hpc3->pbus_dmacfg[hal2->dac.pbus.pbusnr][0] = 0x8208844; |
| hpc3->pbus_dmacfg[hal2->adc.pbus.pbusnr][0] = 0x8208844; |
| |
| if (request_irq(SGI_HPCDMA_IRQ, hal2_interrupt, IRQF_SHARED, |
| hal2str, hal2)) { |
| printk(KERN_ERR "HAL2: Can't get irq %d\n", SGI_HPCDMA_IRQ); |
| ret = -EAGAIN; |
| goto free_card; |
| } |
| |
| hal2->dev_dsp = register_sound_dsp(&hal2_audio_fops, -1); |
| if (hal2->dev_dsp < 0) { |
| ret = hal2->dev_dsp; |
| goto free_irq; |
| } |
| |
| hal2->dev_mixer = register_sound_mixer(&hal2_mixer_fops, -1); |
| if (hal2->dev_mixer < 0) { |
| ret = hal2->dev_mixer; |
| goto unregister_dsp; |
| } |
| |
| hal2_init_mixer(hal2); |
| |
| *phal2 = hal2; |
| return 0; |
| unregister_dsp: |
| unregister_sound_dsp(hal2->dev_dsp); |
| free_irq: |
| free_irq(SGI_HPCDMA_IRQ, hal2); |
| free_card: |
| kfree(hal2); |
| |
| return ret; |
| } |
| |
| extern void (*indy_volume_button)(int); |
| |
| /* |
| * Assuming only one HAL2 card. Mail me if you ever meet machine with |
| * more than one. |
| */ |
| static int __init init_hal2(void) |
| { |
| int i, error; |
| |
| for (i = 0; i < MAXCARDS; i++) |
| hal2_card[i] = NULL; |
| |
| error = hal2_init_card(&hal2_card[0], hpc3c0); |
| |
| /* let Indy's volume buttons work */ |
| if (!error && !ip22_is_fullhouse()) |
| indy_volume_button = hal2_volume_control; |
| |
| return error; |
| |
| } |
| |
| static void __exit exit_hal2(void) |
| { |
| int i; |
| |
| /* unregister volume butons callback function */ |
| indy_volume_button = NULL; |
| |
| for (i = 0; i < MAXCARDS; i++) |
| if (hal2_card[i]) { |
| free_irq(SGI_HPCDMA_IRQ, hal2_card[i]); |
| unregister_sound_dsp(hal2_card[i]->dev_dsp); |
| unregister_sound_mixer(hal2_card[i]->dev_mixer); |
| kfree(hal2_card[i]); |
| } |
| } |
| |
| module_init(init_hal2); |
| module_exit(exit_hal2); |
| |
| MODULE_DESCRIPTION("OSS compatible driver for SGI HAL2 audio"); |
| MODULE_AUTHOR("Ladislav Michl"); |
| MODULE_LICENSE("GPL"); |