| /* |
| * Copyright (c) 2016 Google, Inc |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 or later as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/of_platform.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/reset.h> |
| #include <linux/sysfs.h> |
| #include <linux/thermal.h> |
| |
| /* ASPEED PWM & FAN Tach Register Definition */ |
| #define ASPEED_PTCR_CTRL 0x00 |
| #define ASPEED_PTCR_CLK_CTRL 0x04 |
| #define ASPEED_PTCR_DUTY0_CTRL 0x08 |
| #define ASPEED_PTCR_DUTY1_CTRL 0x0c |
| #define ASPEED_PTCR_TYPEM_CTRL 0x10 |
| #define ASPEED_PTCR_TYPEM_CTRL1 0x14 |
| #define ASPEED_PTCR_TYPEN_CTRL 0x18 |
| #define ASPEED_PTCR_TYPEN_CTRL1 0x1c |
| #define ASPEED_PTCR_TACH_SOURCE 0x20 |
| #define ASPEED_PTCR_TRIGGER 0x28 |
| #define ASPEED_PTCR_RESULT 0x2c |
| #define ASPEED_PTCR_INTR_CTRL 0x30 |
| #define ASPEED_PTCR_INTR_STS 0x34 |
| #define ASPEED_PTCR_TYPEM_LIMIT 0x38 |
| #define ASPEED_PTCR_TYPEN_LIMIT 0x3C |
| #define ASPEED_PTCR_CTRL_EXT 0x40 |
| #define ASPEED_PTCR_CLK_CTRL_EXT 0x44 |
| #define ASPEED_PTCR_DUTY2_CTRL 0x48 |
| #define ASPEED_PTCR_DUTY3_CTRL 0x4c |
| #define ASPEED_PTCR_TYPEO_CTRL 0x50 |
| #define ASPEED_PTCR_TYPEO_CTRL1 0x54 |
| #define ASPEED_PTCR_TACH_SOURCE_EXT 0x60 |
| #define ASPEED_PTCR_TYPEO_LIMIT 0x78 |
| |
| /* ASPEED_PTCR_CTRL : 0x00 - General Control Register */ |
| #define ASPEED_PTCR_CTRL_SET_PWMD_TYPE_PART1 15 |
| #define ASPEED_PTCR_CTRL_SET_PWMD_TYPE_PART2 6 |
| #define ASPEED_PTCR_CTRL_SET_PWMD_TYPE_MASK (BIT(7) | BIT(15)) |
| |
| #define ASPEED_PTCR_CTRL_SET_PWMC_TYPE_PART1 14 |
| #define ASPEED_PTCR_CTRL_SET_PWMC_TYPE_PART2 5 |
| #define ASPEED_PTCR_CTRL_SET_PWMC_TYPE_MASK (BIT(6) | BIT(14)) |
| |
| #define ASPEED_PTCR_CTRL_SET_PWMB_TYPE_PART1 13 |
| #define ASPEED_PTCR_CTRL_SET_PWMB_TYPE_PART2 4 |
| #define ASPEED_PTCR_CTRL_SET_PWMB_TYPE_MASK (BIT(5) | BIT(13)) |
| |
| #define ASPEED_PTCR_CTRL_SET_PWMA_TYPE_PART1 12 |
| #define ASPEED_PTCR_CTRL_SET_PWMA_TYPE_PART2 3 |
| #define ASPEED_PTCR_CTRL_SET_PWMA_TYPE_MASK (BIT(4) | BIT(12)) |
| |
| #define ASPEED_PTCR_CTRL_FAN_NUM_EN(x) BIT(16 + (x)) |
| |
| #define ASPEED_PTCR_CTRL_PWMD_EN BIT(11) |
| #define ASPEED_PTCR_CTRL_PWMC_EN BIT(10) |
| #define ASPEED_PTCR_CTRL_PWMB_EN BIT(9) |
| #define ASPEED_PTCR_CTRL_PWMA_EN BIT(8) |
| |
| #define ASPEED_PTCR_CTRL_CLK_SRC BIT(1) |
| #define ASPEED_PTCR_CTRL_CLK_EN BIT(0) |
| |
| /* ASPEED_PTCR_CLK_CTRL : 0x04 - Clock Control Register */ |
| /* TYPE N */ |
| #define ASPEED_PTCR_CLK_CTRL_TYPEN_MASK GENMASK(31, 16) |
| #define ASPEED_PTCR_CLK_CTRL_TYPEN_UNIT 24 |
| #define ASPEED_PTCR_CLK_CTRL_TYPEN_H 20 |
| #define ASPEED_PTCR_CLK_CTRL_TYPEN_L 16 |
| /* TYPE M */ |
| #define ASPEED_PTCR_CLK_CTRL_TYPEM_MASK GENMASK(15, 0) |
| #define ASPEED_PTCR_CLK_CTRL_TYPEM_UNIT 8 |
| #define ASPEED_PTCR_CLK_CTRL_TYPEM_H 4 |
| #define ASPEED_PTCR_CLK_CTRL_TYPEM_L 0 |
| |
| /* |
| * ASPEED_PTCR_DUTY_CTRL/1/2/3 : 0x08/0x0C/0x48/0x4C - PWM-FAN duty control |
| * 0/1/2/3 register |
| */ |
| #define DUTY_CTRL_PWM2_FALL_POINT 24 |
| #define DUTY_CTRL_PWM2_RISE_POINT 16 |
| #define DUTY_CTRL_PWM2_RISE_FALL_MASK GENMASK(31, 16) |
| #define DUTY_CTRL_PWM1_FALL_POINT 8 |
| #define DUTY_CTRL_PWM1_RISE_POINT 0 |
| #define DUTY_CTRL_PWM1_RISE_FALL_MASK GENMASK(15, 0) |
| |
| /* ASPEED_PTCR_TYPEM_CTRL : 0x10/0x18/0x50 - Type M/N/O Ctrl 0 Register */ |
| #define TYPE_CTRL_FAN_MASK (GENMASK(5, 1) | GENMASK(31, 16)) |
| #define TYPE_CTRL_FAN1_MASK GENMASK(31, 0) |
| #define TYPE_CTRL_FAN_PERIOD 16 |
| #define TYPE_CTRL_FAN_MODE 4 |
| #define TYPE_CTRL_FAN_DIVISION 1 |
| #define TYPE_CTRL_FAN_TYPE_EN 1 |
| |
| /* ASPEED_PTCR_TACH_SOURCE : 0x20/0x60 - Tach Source Register */ |
| /* bit [0,1] at 0x20, bit [2] at 0x60 */ |
| #define TACH_PWM_SOURCE_BIT01(x) ((x) * 2) |
| #define TACH_PWM_SOURCE_BIT2(x) ((x) * 2) |
| #define TACH_PWM_SOURCE_MASK_BIT01(x) (0x3 << ((x) * 2)) |
| #define TACH_PWM_SOURCE_MASK_BIT2(x) BIT((x) * 2) |
| |
| /* ASPEED_PTCR_RESULT : 0x2c - Result Register */ |
| #define RESULT_STATUS_MASK BIT(31) |
| #define RESULT_VALUE_MASK 0xfffff |
| |
| /* ASPEED_PTCR_CTRL_EXT : 0x40 - General Control Extension #1 Register */ |
| #define ASPEED_PTCR_CTRL_SET_PWMH_TYPE_PART1 15 |
| #define ASPEED_PTCR_CTRL_SET_PWMH_TYPE_PART2 6 |
| #define ASPEED_PTCR_CTRL_SET_PWMH_TYPE_MASK (BIT(7) | BIT(15)) |
| |
| #define ASPEED_PTCR_CTRL_SET_PWMG_TYPE_PART1 14 |
| #define ASPEED_PTCR_CTRL_SET_PWMG_TYPE_PART2 5 |
| #define ASPEED_PTCR_CTRL_SET_PWMG_TYPE_MASK (BIT(6) | BIT(14)) |
| |
| #define ASPEED_PTCR_CTRL_SET_PWMF_TYPE_PART1 13 |
| #define ASPEED_PTCR_CTRL_SET_PWMF_TYPE_PART2 4 |
| #define ASPEED_PTCR_CTRL_SET_PWMF_TYPE_MASK (BIT(5) | BIT(13)) |
| |
| #define ASPEED_PTCR_CTRL_SET_PWME_TYPE_PART1 12 |
| #define ASPEED_PTCR_CTRL_SET_PWME_TYPE_PART2 3 |
| #define ASPEED_PTCR_CTRL_SET_PWME_TYPE_MASK (BIT(4) | BIT(12)) |
| |
| #define ASPEED_PTCR_CTRL_PWMH_EN BIT(11) |
| #define ASPEED_PTCR_CTRL_PWMG_EN BIT(10) |
| #define ASPEED_PTCR_CTRL_PWMF_EN BIT(9) |
| #define ASPEED_PTCR_CTRL_PWME_EN BIT(8) |
| |
| /* ASPEED_PTCR_CLK_EXT_CTRL : 0x44 - Clock Control Extension #1 Register */ |
| /* TYPE O */ |
| #define ASPEED_PTCR_CLK_CTRL_TYPEO_MASK GENMASK(15, 0) |
| #define ASPEED_PTCR_CLK_CTRL_TYPEO_UNIT 8 |
| #define ASPEED_PTCR_CLK_CTRL_TYPEO_H 4 |
| #define ASPEED_PTCR_CLK_CTRL_TYPEO_L 0 |
| |
| #define PWM_MAX 255 |
| |
| #define BOTH_EDGES 0x02 /* 10b */ |
| |
| #define M_PWM_DIV_H 0x00 |
| #define M_PWM_DIV_L 0x05 |
| #define M_PWM_PERIOD 0x5F |
| #define M_TACH_CLK_DIV 0x00 |
| /* |
| * 5:4 Type N fan tach mode selection bit: |
| * 00: falling |
| * 01: rising |
| * 10: both |
| * 11: reserved. |
| */ |
| #define M_TACH_MODE 0x02 /* 10b */ |
| #define M_TACH_UNIT 0x0210 |
| #define INIT_FAN_CTRL 0xFF |
| |
| /* How long we sleep in us while waiting for an RPM result. */ |
| #define ASPEED_RPM_STATUS_SLEEP_USEC 500 |
| |
| #define MAX_CDEV_NAME_LEN 16 |
| |
| struct aspeed_cooling_device { |
| char name[16]; |
| struct aspeed_pwm_tacho_data *priv; |
| struct thermal_cooling_device *tcdev; |
| int pwm_port; |
| u8 *cooling_levels; |
| u8 max_state; |
| u8 cur_state; |
| }; |
| |
| struct aspeed_pwm_tacho_data { |
| struct regmap *regmap; |
| struct reset_control *rst; |
| unsigned long clk_freq; |
| bool pwm_present[8]; |
| bool fan_tach_present[16]; |
| u8 type_pwm_clock_unit[3]; |
| u8 type_pwm_clock_division_h[3]; |
| u8 type_pwm_clock_division_l[3]; |
| u8 type_fan_tach_clock_division[3]; |
| u8 type_fan_tach_mode[3]; |
| u16 type_fan_tach_unit[3]; |
| u8 pwm_port_type[8]; |
| u8 pwm_port_fan_ctrl[8]; |
| u8 fan_tach_ch_source[16]; |
| struct aspeed_cooling_device *cdev[8]; |
| const struct attribute_group *groups[3]; |
| }; |
| |
| enum type { TYPEM, TYPEN, TYPEO }; |
| |
| struct type_params { |
| u32 l_value; |
| u32 h_value; |
| u32 unit_value; |
| u32 clk_ctrl_mask; |
| u32 clk_ctrl_reg; |
| u32 ctrl_reg; |
| u32 ctrl_reg1; |
| }; |
| |
| static const struct type_params type_params[] = { |
| [TYPEM] = { |
| .l_value = ASPEED_PTCR_CLK_CTRL_TYPEM_L, |
| .h_value = ASPEED_PTCR_CLK_CTRL_TYPEM_H, |
| .unit_value = ASPEED_PTCR_CLK_CTRL_TYPEM_UNIT, |
| .clk_ctrl_mask = ASPEED_PTCR_CLK_CTRL_TYPEM_MASK, |
| .clk_ctrl_reg = ASPEED_PTCR_CLK_CTRL, |
| .ctrl_reg = ASPEED_PTCR_TYPEM_CTRL, |
| .ctrl_reg1 = ASPEED_PTCR_TYPEM_CTRL1, |
| }, |
| [TYPEN] = { |
| .l_value = ASPEED_PTCR_CLK_CTRL_TYPEN_L, |
| .h_value = ASPEED_PTCR_CLK_CTRL_TYPEN_H, |
| .unit_value = ASPEED_PTCR_CLK_CTRL_TYPEN_UNIT, |
| .clk_ctrl_mask = ASPEED_PTCR_CLK_CTRL_TYPEN_MASK, |
| .clk_ctrl_reg = ASPEED_PTCR_CLK_CTRL, |
| .ctrl_reg = ASPEED_PTCR_TYPEN_CTRL, |
| .ctrl_reg1 = ASPEED_PTCR_TYPEN_CTRL1, |
| }, |
| [TYPEO] = { |
| .l_value = ASPEED_PTCR_CLK_CTRL_TYPEO_L, |
| .h_value = ASPEED_PTCR_CLK_CTRL_TYPEO_H, |
| .unit_value = ASPEED_PTCR_CLK_CTRL_TYPEO_UNIT, |
| .clk_ctrl_mask = ASPEED_PTCR_CLK_CTRL_TYPEO_MASK, |
| .clk_ctrl_reg = ASPEED_PTCR_CLK_CTRL_EXT, |
| .ctrl_reg = ASPEED_PTCR_TYPEO_CTRL, |
| .ctrl_reg1 = ASPEED_PTCR_TYPEO_CTRL1, |
| } |
| }; |
| |
| enum pwm_port { PWMA, PWMB, PWMC, PWMD, PWME, PWMF, PWMG, PWMH }; |
| |
| struct pwm_port_params { |
| u32 pwm_en; |
| u32 ctrl_reg; |
| u32 type_part1; |
| u32 type_part2; |
| u32 type_mask; |
| u32 duty_ctrl_rise_point; |
| u32 duty_ctrl_fall_point; |
| u32 duty_ctrl_reg; |
| u32 duty_ctrl_rise_fall_mask; |
| }; |
| |
| static const struct pwm_port_params pwm_port_params[] = { |
| [PWMA] = { |
| .pwm_en = ASPEED_PTCR_CTRL_PWMA_EN, |
| .ctrl_reg = ASPEED_PTCR_CTRL, |
| .type_part1 = ASPEED_PTCR_CTRL_SET_PWMA_TYPE_PART1, |
| .type_part2 = ASPEED_PTCR_CTRL_SET_PWMA_TYPE_PART2, |
| .type_mask = ASPEED_PTCR_CTRL_SET_PWMA_TYPE_MASK, |
| .duty_ctrl_rise_point = DUTY_CTRL_PWM1_RISE_POINT, |
| .duty_ctrl_fall_point = DUTY_CTRL_PWM1_FALL_POINT, |
| .duty_ctrl_reg = ASPEED_PTCR_DUTY0_CTRL, |
| .duty_ctrl_rise_fall_mask = DUTY_CTRL_PWM1_RISE_FALL_MASK, |
| }, |
| [PWMB] = { |
| .pwm_en = ASPEED_PTCR_CTRL_PWMB_EN, |
| .ctrl_reg = ASPEED_PTCR_CTRL, |
| .type_part1 = ASPEED_PTCR_CTRL_SET_PWMB_TYPE_PART1, |
| .type_part2 = ASPEED_PTCR_CTRL_SET_PWMB_TYPE_PART2, |
| .type_mask = ASPEED_PTCR_CTRL_SET_PWMB_TYPE_MASK, |
| .duty_ctrl_rise_point = DUTY_CTRL_PWM2_RISE_POINT, |
| .duty_ctrl_fall_point = DUTY_CTRL_PWM2_FALL_POINT, |
| .duty_ctrl_reg = ASPEED_PTCR_DUTY0_CTRL, |
| .duty_ctrl_rise_fall_mask = DUTY_CTRL_PWM2_RISE_FALL_MASK, |
| }, |
| [PWMC] = { |
| .pwm_en = ASPEED_PTCR_CTRL_PWMC_EN, |
| .ctrl_reg = ASPEED_PTCR_CTRL, |
| .type_part1 = ASPEED_PTCR_CTRL_SET_PWMC_TYPE_PART1, |
| .type_part2 = ASPEED_PTCR_CTRL_SET_PWMC_TYPE_PART2, |
| .type_mask = ASPEED_PTCR_CTRL_SET_PWMC_TYPE_MASK, |
| .duty_ctrl_rise_point = DUTY_CTRL_PWM1_RISE_POINT, |
| .duty_ctrl_fall_point = DUTY_CTRL_PWM1_FALL_POINT, |
| .duty_ctrl_reg = ASPEED_PTCR_DUTY1_CTRL, |
| .duty_ctrl_rise_fall_mask = DUTY_CTRL_PWM1_RISE_FALL_MASK, |
| }, |
| [PWMD] = { |
| .pwm_en = ASPEED_PTCR_CTRL_PWMD_EN, |
| .ctrl_reg = ASPEED_PTCR_CTRL, |
| .type_part1 = ASPEED_PTCR_CTRL_SET_PWMD_TYPE_PART1, |
| .type_part2 = ASPEED_PTCR_CTRL_SET_PWMD_TYPE_PART2, |
| .type_mask = ASPEED_PTCR_CTRL_SET_PWMD_TYPE_MASK, |
| .duty_ctrl_rise_point = DUTY_CTRL_PWM2_RISE_POINT, |
| .duty_ctrl_fall_point = DUTY_CTRL_PWM2_FALL_POINT, |
| .duty_ctrl_reg = ASPEED_PTCR_DUTY1_CTRL, |
| .duty_ctrl_rise_fall_mask = DUTY_CTRL_PWM2_RISE_FALL_MASK, |
| }, |
| [PWME] = { |
| .pwm_en = ASPEED_PTCR_CTRL_PWME_EN, |
| .ctrl_reg = ASPEED_PTCR_CTRL_EXT, |
| .type_part1 = ASPEED_PTCR_CTRL_SET_PWME_TYPE_PART1, |
| .type_part2 = ASPEED_PTCR_CTRL_SET_PWME_TYPE_PART2, |
| .type_mask = ASPEED_PTCR_CTRL_SET_PWME_TYPE_MASK, |
| .duty_ctrl_rise_point = DUTY_CTRL_PWM1_RISE_POINT, |
| .duty_ctrl_fall_point = DUTY_CTRL_PWM1_FALL_POINT, |
| .duty_ctrl_reg = ASPEED_PTCR_DUTY2_CTRL, |
| .duty_ctrl_rise_fall_mask = DUTY_CTRL_PWM1_RISE_FALL_MASK, |
| }, |
| [PWMF] = { |
| .pwm_en = ASPEED_PTCR_CTRL_PWMF_EN, |
| .ctrl_reg = ASPEED_PTCR_CTRL_EXT, |
| .type_part1 = ASPEED_PTCR_CTRL_SET_PWMF_TYPE_PART1, |
| .type_part2 = ASPEED_PTCR_CTRL_SET_PWMF_TYPE_PART2, |
| .type_mask = ASPEED_PTCR_CTRL_SET_PWMF_TYPE_MASK, |
| .duty_ctrl_rise_point = DUTY_CTRL_PWM2_RISE_POINT, |
| .duty_ctrl_fall_point = DUTY_CTRL_PWM2_FALL_POINT, |
| .duty_ctrl_reg = ASPEED_PTCR_DUTY2_CTRL, |
| .duty_ctrl_rise_fall_mask = DUTY_CTRL_PWM2_RISE_FALL_MASK, |
| }, |
| [PWMG] = { |
| .pwm_en = ASPEED_PTCR_CTRL_PWMG_EN, |
| .ctrl_reg = ASPEED_PTCR_CTRL_EXT, |
| .type_part1 = ASPEED_PTCR_CTRL_SET_PWMG_TYPE_PART1, |
| .type_part2 = ASPEED_PTCR_CTRL_SET_PWMG_TYPE_PART2, |
| .type_mask = ASPEED_PTCR_CTRL_SET_PWMG_TYPE_MASK, |
| .duty_ctrl_rise_point = DUTY_CTRL_PWM1_RISE_POINT, |
| .duty_ctrl_fall_point = DUTY_CTRL_PWM1_FALL_POINT, |
| .duty_ctrl_reg = ASPEED_PTCR_DUTY3_CTRL, |
| .duty_ctrl_rise_fall_mask = DUTY_CTRL_PWM1_RISE_FALL_MASK, |
| }, |
| [PWMH] = { |
| .pwm_en = ASPEED_PTCR_CTRL_PWMH_EN, |
| .ctrl_reg = ASPEED_PTCR_CTRL_EXT, |
| .type_part1 = ASPEED_PTCR_CTRL_SET_PWMH_TYPE_PART1, |
| .type_part2 = ASPEED_PTCR_CTRL_SET_PWMH_TYPE_PART2, |
| .type_mask = ASPEED_PTCR_CTRL_SET_PWMH_TYPE_MASK, |
| .duty_ctrl_rise_point = DUTY_CTRL_PWM2_RISE_POINT, |
| .duty_ctrl_fall_point = DUTY_CTRL_PWM2_FALL_POINT, |
| .duty_ctrl_reg = ASPEED_PTCR_DUTY3_CTRL, |
| .duty_ctrl_rise_fall_mask = DUTY_CTRL_PWM2_RISE_FALL_MASK, |
| } |
| }; |
| |
| static int regmap_aspeed_pwm_tacho_reg_write(void *context, unsigned int reg, |
| unsigned int val) |
| { |
| void __iomem *regs = (void __iomem *)context; |
| |
| writel(val, regs + reg); |
| return 0; |
| } |
| |
| static int regmap_aspeed_pwm_tacho_reg_read(void *context, unsigned int reg, |
| unsigned int *val) |
| { |
| void __iomem *regs = (void __iomem *)context; |
| |
| *val = readl(regs + reg); |
| return 0; |
| } |
| |
| static const struct regmap_config aspeed_pwm_tacho_regmap_config = { |
| .reg_bits = 32, |
| .val_bits = 32, |
| .reg_stride = 4, |
| .max_register = ASPEED_PTCR_TYPEO_LIMIT, |
| .reg_write = regmap_aspeed_pwm_tacho_reg_write, |
| .reg_read = regmap_aspeed_pwm_tacho_reg_read, |
| .fast_io = true, |
| }; |
| |
| static void aspeed_set_clock_enable(struct regmap *regmap, bool val) |
| { |
| regmap_update_bits(regmap, ASPEED_PTCR_CTRL, |
| ASPEED_PTCR_CTRL_CLK_EN, |
| val ? ASPEED_PTCR_CTRL_CLK_EN : 0); |
| } |
| |
| static void aspeed_set_clock_source(struct regmap *regmap, int val) |
| { |
| regmap_update_bits(regmap, ASPEED_PTCR_CTRL, |
| ASPEED_PTCR_CTRL_CLK_SRC, |
| val ? ASPEED_PTCR_CTRL_CLK_SRC : 0); |
| } |
| |
| static void aspeed_set_pwm_clock_values(struct regmap *regmap, u8 type, |
| u8 div_high, u8 div_low, u8 unit) |
| { |
| u32 reg_value = ((div_high << type_params[type].h_value) | |
| (div_low << type_params[type].l_value) | |
| (unit << type_params[type].unit_value)); |
| |
| regmap_update_bits(regmap, type_params[type].clk_ctrl_reg, |
| type_params[type].clk_ctrl_mask, reg_value); |
| } |
| |
| static void aspeed_set_pwm_port_enable(struct regmap *regmap, u8 pwm_port, |
| bool enable) |
| { |
| regmap_update_bits(regmap, pwm_port_params[pwm_port].ctrl_reg, |
| pwm_port_params[pwm_port].pwm_en, |
| enable ? pwm_port_params[pwm_port].pwm_en : 0); |
| } |
| |
| static void aspeed_set_pwm_port_type(struct regmap *regmap, |
| u8 pwm_port, u8 type) |
| { |
| u32 reg_value = (type & 0x1) << pwm_port_params[pwm_port].type_part1; |
| |
| reg_value |= (type & 0x2) << pwm_port_params[pwm_port].type_part2; |
| |
| regmap_update_bits(regmap, pwm_port_params[pwm_port].ctrl_reg, |
| pwm_port_params[pwm_port].type_mask, reg_value); |
| } |
| |
| static void aspeed_set_pwm_port_duty_rising_falling(struct regmap *regmap, |
| u8 pwm_port, u8 rising, |
| u8 falling) |
| { |
| u32 reg_value = (rising << |
| pwm_port_params[pwm_port].duty_ctrl_rise_point); |
| reg_value |= (falling << |
| pwm_port_params[pwm_port].duty_ctrl_fall_point); |
| |
| regmap_update_bits(regmap, pwm_port_params[pwm_port].duty_ctrl_reg, |
| pwm_port_params[pwm_port].duty_ctrl_rise_fall_mask, |
| reg_value); |
| } |
| |
| static void aspeed_set_tacho_type_enable(struct regmap *regmap, u8 type, |
| bool enable) |
| { |
| regmap_update_bits(regmap, type_params[type].ctrl_reg, |
| TYPE_CTRL_FAN_TYPE_EN, |
| enable ? TYPE_CTRL_FAN_TYPE_EN : 0); |
| } |
| |
| static void aspeed_set_tacho_type_values(struct regmap *regmap, u8 type, |
| u8 mode, u16 unit, u8 division) |
| { |
| u32 reg_value = ((mode << TYPE_CTRL_FAN_MODE) | |
| (unit << TYPE_CTRL_FAN_PERIOD) | |
| (division << TYPE_CTRL_FAN_DIVISION)); |
| |
| regmap_update_bits(regmap, type_params[type].ctrl_reg, |
| TYPE_CTRL_FAN_MASK, reg_value); |
| regmap_update_bits(regmap, type_params[type].ctrl_reg1, |
| TYPE_CTRL_FAN1_MASK, unit << 16); |
| } |
| |
| static void aspeed_set_fan_tach_ch_enable(struct regmap *regmap, u8 fan_tach_ch, |
| bool enable) |
| { |
| regmap_update_bits(regmap, ASPEED_PTCR_CTRL, |
| ASPEED_PTCR_CTRL_FAN_NUM_EN(fan_tach_ch), |
| enable ? |
| ASPEED_PTCR_CTRL_FAN_NUM_EN(fan_tach_ch) : 0); |
| } |
| |
| static void aspeed_set_fan_tach_ch_source(struct regmap *regmap, u8 fan_tach_ch, |
| u8 fan_tach_ch_source) |
| { |
| u32 reg_value1 = ((fan_tach_ch_source & 0x3) << |
| TACH_PWM_SOURCE_BIT01(fan_tach_ch)); |
| u32 reg_value2 = (((fan_tach_ch_source & 0x4) >> 2) << |
| TACH_PWM_SOURCE_BIT2(fan_tach_ch)); |
| |
| regmap_update_bits(regmap, ASPEED_PTCR_TACH_SOURCE, |
| TACH_PWM_SOURCE_MASK_BIT01(fan_tach_ch), |
| reg_value1); |
| |
| regmap_update_bits(regmap, ASPEED_PTCR_TACH_SOURCE_EXT, |
| TACH_PWM_SOURCE_MASK_BIT2(fan_tach_ch), |
| reg_value2); |
| } |
| |
| static void aspeed_set_pwm_port_fan_ctrl(struct aspeed_pwm_tacho_data *priv, |
| u8 index, u8 fan_ctrl) |
| { |
| u16 period, dc_time_on; |
| |
| period = priv->type_pwm_clock_unit[priv->pwm_port_type[index]]; |
| period += 1; |
| dc_time_on = (fan_ctrl * period) / PWM_MAX; |
| |
| if (dc_time_on == 0) { |
| aspeed_set_pwm_port_enable(priv->regmap, index, false); |
| } else { |
| if (dc_time_on == period) |
| dc_time_on = 0; |
| |
| aspeed_set_pwm_port_duty_rising_falling(priv->regmap, index, 0, |
| dc_time_on); |
| aspeed_set_pwm_port_enable(priv->regmap, index, true); |
| } |
| } |
| |
| static u32 aspeed_get_fan_tach_ch_measure_period(struct aspeed_pwm_tacho_data |
| *priv, u8 type) |
| { |
| u32 clk; |
| u16 tacho_unit; |
| u8 clk_unit, div_h, div_l, tacho_div; |
| |
| clk = priv->clk_freq; |
| clk_unit = priv->type_pwm_clock_unit[type]; |
| div_h = priv->type_pwm_clock_division_h[type]; |
| div_h = 0x1 << div_h; |
| div_l = priv->type_pwm_clock_division_l[type]; |
| if (div_l == 0) |
| div_l = 1; |
| else |
| div_l = div_l * 2; |
| |
| tacho_unit = priv->type_fan_tach_unit[type]; |
| tacho_div = priv->type_fan_tach_clock_division[type]; |
| |
| tacho_div = 0x4 << (tacho_div * 2); |
| return clk / (clk_unit * div_h * div_l * tacho_div * tacho_unit); |
| } |
| |
| static int aspeed_get_fan_tach_ch_rpm(struct aspeed_pwm_tacho_data *priv, |
| u8 fan_tach_ch) |
| { |
| u32 raw_data, tach_div, clk_source, msec, usec, val; |
| u8 fan_tach_ch_source, type, mode, both; |
| int ret; |
| |
| regmap_write(priv->regmap, ASPEED_PTCR_TRIGGER, 0); |
| regmap_write(priv->regmap, ASPEED_PTCR_TRIGGER, 0x1 << fan_tach_ch); |
| |
| fan_tach_ch_source = priv->fan_tach_ch_source[fan_tach_ch]; |
| type = priv->pwm_port_type[fan_tach_ch_source]; |
| |
| msec = (1000 / aspeed_get_fan_tach_ch_measure_period(priv, type)); |
| usec = msec * 1000; |
| |
| ret = regmap_read_poll_timeout( |
| priv->regmap, |
| ASPEED_PTCR_RESULT, |
| val, |
| (val & RESULT_STATUS_MASK), |
| ASPEED_RPM_STATUS_SLEEP_USEC, |
| usec); |
| |
| /* return -ETIMEDOUT if we didn't get an answer. */ |
| if (ret) |
| return ret; |
| |
| raw_data = val & RESULT_VALUE_MASK; |
| tach_div = priv->type_fan_tach_clock_division[type]; |
| /* |
| * We need the mode to determine if the raw_data is double (from |
| * counting both edges). |
| */ |
| mode = priv->type_fan_tach_mode[type]; |
| both = (mode & BOTH_EDGES) ? 1 : 0; |
| |
| tach_div = (0x4 << both) << (tach_div * 2); |
| clk_source = priv->clk_freq; |
| |
| if (raw_data == 0) |
| return 0; |
| |
| return (clk_source * 60) / (2 * raw_data * tach_div); |
| } |
| |
| static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| int index = sensor_attr->index; |
| int ret; |
| struct aspeed_pwm_tacho_data *priv = dev_get_drvdata(dev); |
| long fan_ctrl; |
| |
| ret = kstrtol(buf, 10, &fan_ctrl); |
| if (ret != 0) |
| return ret; |
| |
| if (fan_ctrl < 0 || fan_ctrl > PWM_MAX) |
| return -EINVAL; |
| |
| if (priv->pwm_port_fan_ctrl[index] == fan_ctrl) |
| return count; |
| |
| priv->pwm_port_fan_ctrl[index] = fan_ctrl; |
| aspeed_set_pwm_port_fan_ctrl(priv, index, fan_ctrl); |
| |
| return count; |
| } |
| |
| static ssize_t show_pwm(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| int index = sensor_attr->index; |
| struct aspeed_pwm_tacho_data *priv = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%u\n", priv->pwm_port_fan_ctrl[index]); |
| } |
| |
| static ssize_t show_rpm(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| int index = sensor_attr->index; |
| int rpm; |
| struct aspeed_pwm_tacho_data *priv = dev_get_drvdata(dev); |
| |
| rpm = aspeed_get_fan_tach_ch_rpm(priv, index); |
| if (rpm < 0) |
| return rpm; |
| |
| return sprintf(buf, "%d\n", rpm); |
| } |
| |
| static umode_t pwm_is_visible(struct kobject *kobj, |
| struct attribute *a, int index) |
| { |
| struct device *dev = container_of(kobj, struct device, kobj); |
| struct aspeed_pwm_tacho_data *priv = dev_get_drvdata(dev); |
| |
| if (!priv->pwm_present[index]) |
| return 0; |
| return a->mode; |
| } |
| |
| static umode_t fan_dev_is_visible(struct kobject *kobj, |
| struct attribute *a, int index) |
| { |
| struct device *dev = container_of(kobj, struct device, kobj); |
| struct aspeed_pwm_tacho_data *priv = dev_get_drvdata(dev); |
| |
| if (!priv->fan_tach_present[index]) |
| return 0; |
| return a->mode; |
| } |
| |
| static SENSOR_DEVICE_ATTR(pwm1, 0644, |
| show_pwm, set_pwm, 0); |
| static SENSOR_DEVICE_ATTR(pwm2, 0644, |
| show_pwm, set_pwm, 1); |
| static SENSOR_DEVICE_ATTR(pwm3, 0644, |
| show_pwm, set_pwm, 2); |
| static SENSOR_DEVICE_ATTR(pwm4, 0644, |
| show_pwm, set_pwm, 3); |
| static SENSOR_DEVICE_ATTR(pwm5, 0644, |
| show_pwm, set_pwm, 4); |
| static SENSOR_DEVICE_ATTR(pwm6, 0644, |
| show_pwm, set_pwm, 5); |
| static SENSOR_DEVICE_ATTR(pwm7, 0644, |
| show_pwm, set_pwm, 6); |
| static SENSOR_DEVICE_ATTR(pwm8, 0644, |
| show_pwm, set_pwm, 7); |
| static struct attribute *pwm_dev_attrs[] = { |
| &sensor_dev_attr_pwm1.dev_attr.attr, |
| &sensor_dev_attr_pwm2.dev_attr.attr, |
| &sensor_dev_attr_pwm3.dev_attr.attr, |
| &sensor_dev_attr_pwm4.dev_attr.attr, |
| &sensor_dev_attr_pwm5.dev_attr.attr, |
| &sensor_dev_attr_pwm6.dev_attr.attr, |
| &sensor_dev_attr_pwm7.dev_attr.attr, |
| &sensor_dev_attr_pwm8.dev_attr.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group pwm_dev_group = { |
| .attrs = pwm_dev_attrs, |
| .is_visible = pwm_is_visible, |
| }; |
| |
| static SENSOR_DEVICE_ATTR(fan1_input, 0444, |
| show_rpm, NULL, 0); |
| static SENSOR_DEVICE_ATTR(fan2_input, 0444, |
| show_rpm, NULL, 1); |
| static SENSOR_DEVICE_ATTR(fan3_input, 0444, |
| show_rpm, NULL, 2); |
| static SENSOR_DEVICE_ATTR(fan4_input, 0444, |
| show_rpm, NULL, 3); |
| static SENSOR_DEVICE_ATTR(fan5_input, 0444, |
| show_rpm, NULL, 4); |
| static SENSOR_DEVICE_ATTR(fan6_input, 0444, |
| show_rpm, NULL, 5); |
| static SENSOR_DEVICE_ATTR(fan7_input, 0444, |
| show_rpm, NULL, 6); |
| static SENSOR_DEVICE_ATTR(fan8_input, 0444, |
| show_rpm, NULL, 7); |
| static SENSOR_DEVICE_ATTR(fan9_input, 0444, |
| show_rpm, NULL, 8); |
| static SENSOR_DEVICE_ATTR(fan10_input, 0444, |
| show_rpm, NULL, 9); |
| static SENSOR_DEVICE_ATTR(fan11_input, 0444, |
| show_rpm, NULL, 10); |
| static SENSOR_DEVICE_ATTR(fan12_input, 0444, |
| show_rpm, NULL, 11); |
| static SENSOR_DEVICE_ATTR(fan13_input, 0444, |
| show_rpm, NULL, 12); |
| static SENSOR_DEVICE_ATTR(fan14_input, 0444, |
| show_rpm, NULL, 13); |
| static SENSOR_DEVICE_ATTR(fan15_input, 0444, |
| show_rpm, NULL, 14); |
| static SENSOR_DEVICE_ATTR(fan16_input, 0444, |
| show_rpm, NULL, 15); |
| static struct attribute *fan_dev_attrs[] = { |
| &sensor_dev_attr_fan1_input.dev_attr.attr, |
| &sensor_dev_attr_fan2_input.dev_attr.attr, |
| &sensor_dev_attr_fan3_input.dev_attr.attr, |
| &sensor_dev_attr_fan4_input.dev_attr.attr, |
| &sensor_dev_attr_fan5_input.dev_attr.attr, |
| &sensor_dev_attr_fan6_input.dev_attr.attr, |
| &sensor_dev_attr_fan7_input.dev_attr.attr, |
| &sensor_dev_attr_fan8_input.dev_attr.attr, |
| &sensor_dev_attr_fan9_input.dev_attr.attr, |
| &sensor_dev_attr_fan10_input.dev_attr.attr, |
| &sensor_dev_attr_fan11_input.dev_attr.attr, |
| &sensor_dev_attr_fan12_input.dev_attr.attr, |
| &sensor_dev_attr_fan13_input.dev_attr.attr, |
| &sensor_dev_attr_fan14_input.dev_attr.attr, |
| &sensor_dev_attr_fan15_input.dev_attr.attr, |
| &sensor_dev_attr_fan16_input.dev_attr.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group fan_dev_group = { |
| .attrs = fan_dev_attrs, |
| .is_visible = fan_dev_is_visible, |
| }; |
| |
| /* |
| * The clock type is type M : |
| * The PWM frequency = 24MHz / (type M clock division L bit * |
| * type M clock division H bit * (type M PWM period bit + 1)) |
| */ |
| static void aspeed_create_type(struct aspeed_pwm_tacho_data *priv) |
| { |
| priv->type_pwm_clock_division_h[TYPEM] = M_PWM_DIV_H; |
| priv->type_pwm_clock_division_l[TYPEM] = M_PWM_DIV_L; |
| priv->type_pwm_clock_unit[TYPEM] = M_PWM_PERIOD; |
| aspeed_set_pwm_clock_values(priv->regmap, TYPEM, M_PWM_DIV_H, |
| M_PWM_DIV_L, M_PWM_PERIOD); |
| aspeed_set_tacho_type_enable(priv->regmap, TYPEM, true); |
| priv->type_fan_tach_clock_division[TYPEM] = M_TACH_CLK_DIV; |
| priv->type_fan_tach_unit[TYPEM] = M_TACH_UNIT; |
| priv->type_fan_tach_mode[TYPEM] = M_TACH_MODE; |
| aspeed_set_tacho_type_values(priv->regmap, TYPEM, M_TACH_MODE, |
| M_TACH_UNIT, M_TACH_CLK_DIV); |
| } |
| |
| static void aspeed_create_pwm_port(struct aspeed_pwm_tacho_data *priv, |
| u8 pwm_port) |
| { |
| aspeed_set_pwm_port_enable(priv->regmap, pwm_port, true); |
| priv->pwm_present[pwm_port] = true; |
| |
| priv->pwm_port_type[pwm_port] = TYPEM; |
| aspeed_set_pwm_port_type(priv->regmap, pwm_port, TYPEM); |
| |
| priv->pwm_port_fan_ctrl[pwm_port] = INIT_FAN_CTRL; |
| aspeed_set_pwm_port_fan_ctrl(priv, pwm_port, INIT_FAN_CTRL); |
| } |
| |
| static void aspeed_create_fan_tach_channel(struct aspeed_pwm_tacho_data *priv, |
| u8 *fan_tach_ch, |
| int count, |
| u8 pwm_source) |
| { |
| u8 val, index; |
| |
| for (val = 0; val < count; val++) { |
| index = fan_tach_ch[val]; |
| aspeed_set_fan_tach_ch_enable(priv->regmap, index, true); |
| priv->fan_tach_present[index] = true; |
| priv->fan_tach_ch_source[index] = pwm_source; |
| aspeed_set_fan_tach_ch_source(priv->regmap, index, pwm_source); |
| } |
| } |
| |
| static int |
| aspeed_pwm_cz_get_max_state(struct thermal_cooling_device *tcdev, |
| unsigned long *state) |
| { |
| struct aspeed_cooling_device *cdev = tcdev->devdata; |
| |
| *state = cdev->max_state; |
| |
| return 0; |
| } |
| |
| static int |
| aspeed_pwm_cz_get_cur_state(struct thermal_cooling_device *tcdev, |
| unsigned long *state) |
| { |
| struct aspeed_cooling_device *cdev = tcdev->devdata; |
| |
| *state = cdev->cur_state; |
| |
| return 0; |
| } |
| |
| static int |
| aspeed_pwm_cz_set_cur_state(struct thermal_cooling_device *tcdev, |
| unsigned long state) |
| { |
| struct aspeed_cooling_device *cdev = tcdev->devdata; |
| |
| if (state > cdev->max_state) |
| return -EINVAL; |
| |
| cdev->cur_state = state; |
| cdev->priv->pwm_port_fan_ctrl[cdev->pwm_port] = |
| cdev->cooling_levels[cdev->cur_state]; |
| aspeed_set_pwm_port_fan_ctrl(cdev->priv, cdev->pwm_port, |
| cdev->cooling_levels[cdev->cur_state]); |
| |
| return 0; |
| } |
| |
| static const struct thermal_cooling_device_ops aspeed_pwm_cool_ops = { |
| .get_max_state = aspeed_pwm_cz_get_max_state, |
| .get_cur_state = aspeed_pwm_cz_get_cur_state, |
| .set_cur_state = aspeed_pwm_cz_set_cur_state, |
| }; |
| |
| static int aspeed_create_pwm_cooling(struct device *dev, |
| struct device_node *child, |
| struct aspeed_pwm_tacho_data *priv, |
| u32 pwm_port, u8 num_levels) |
| { |
| int ret; |
| struct aspeed_cooling_device *cdev; |
| |
| cdev = devm_kzalloc(dev, sizeof(*cdev), GFP_KERNEL); |
| |
| if (!cdev) |
| return -ENOMEM; |
| |
| cdev->cooling_levels = devm_kzalloc(dev, num_levels, GFP_KERNEL); |
| if (!cdev->cooling_levels) |
| return -ENOMEM; |
| |
| cdev->max_state = num_levels - 1; |
| ret = of_property_read_u8_array(child, "cooling-levels", |
| cdev->cooling_levels, |
| num_levels); |
| if (ret) { |
| dev_err(dev, "Property 'cooling-levels' cannot be read.\n"); |
| return ret; |
| } |
| snprintf(cdev->name, MAX_CDEV_NAME_LEN, "%s%d", child->name, pwm_port); |
| |
| cdev->tcdev = thermal_of_cooling_device_register(child, |
| cdev->name, |
| cdev, |
| &aspeed_pwm_cool_ops); |
| if (IS_ERR(cdev->tcdev)) |
| return PTR_ERR(cdev->tcdev); |
| |
| cdev->priv = priv; |
| cdev->pwm_port = pwm_port; |
| |
| priv->cdev[pwm_port] = cdev; |
| |
| return 0; |
| } |
| |
| static int aspeed_create_fan(struct device *dev, |
| struct device_node *child, |
| struct aspeed_pwm_tacho_data *priv) |
| { |
| u8 *fan_tach_ch; |
| u32 pwm_port; |
| int ret, count; |
| |
| ret = of_property_read_u32(child, "reg", &pwm_port); |
| if (ret) |
| return ret; |
| aspeed_create_pwm_port(priv, (u8)pwm_port); |
| |
| ret = of_property_count_u8_elems(child, "cooling-levels"); |
| |
| if (ret > 0) { |
| ret = aspeed_create_pwm_cooling(dev, child, priv, pwm_port, |
| ret); |
| if (ret) |
| return ret; |
| } |
| |
| count = of_property_count_u8_elems(child, "aspeed,fan-tach-ch"); |
| if (count < 1) |
| return -EINVAL; |
| fan_tach_ch = devm_kzalloc(dev, sizeof(*fan_tach_ch) * count, |
| GFP_KERNEL); |
| if (!fan_tach_ch) |
| return -ENOMEM; |
| ret = of_property_read_u8_array(child, "aspeed,fan-tach-ch", |
| fan_tach_ch, count); |
| if (ret) |
| return ret; |
| aspeed_create_fan_tach_channel(priv, fan_tach_ch, count, pwm_port); |
| |
| return 0; |
| } |
| |
| static void aspeed_pwm_tacho_remove(void *data) |
| { |
| struct aspeed_pwm_tacho_data *priv = data; |
| |
| reset_control_assert(priv->rst); |
| } |
| |
| static int aspeed_pwm_tacho_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *np, *child; |
| struct aspeed_pwm_tacho_data *priv; |
| void __iomem *regs; |
| struct resource *res; |
| struct device *hwmon; |
| struct clk *clk; |
| int ret; |
| |
| np = dev->of_node; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) |
| return -ENOENT; |
| regs = devm_ioremap_resource(dev, res); |
| if (IS_ERR(regs)) |
| return PTR_ERR(regs); |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| priv->regmap = devm_regmap_init(dev, NULL, (__force void *)regs, |
| &aspeed_pwm_tacho_regmap_config); |
| if (IS_ERR(priv->regmap)) |
| return PTR_ERR(priv->regmap); |
| |
| priv->rst = devm_reset_control_get_exclusive(dev, NULL); |
| if (IS_ERR(priv->rst)) { |
| dev_err(dev, |
| "missing or invalid reset controller device tree entry"); |
| return PTR_ERR(priv->rst); |
| } |
| reset_control_deassert(priv->rst); |
| |
| ret = devm_add_action_or_reset(dev, aspeed_pwm_tacho_remove, priv); |
| if (ret) |
| return ret; |
| |
| regmap_write(priv->regmap, ASPEED_PTCR_TACH_SOURCE, 0); |
| regmap_write(priv->regmap, ASPEED_PTCR_TACH_SOURCE_EXT, 0); |
| |
| clk = devm_clk_get(dev, NULL); |
| if (IS_ERR(clk)) |
| return -ENODEV; |
| priv->clk_freq = clk_get_rate(clk); |
| aspeed_set_clock_enable(priv->regmap, true); |
| aspeed_set_clock_source(priv->regmap, 0); |
| |
| aspeed_create_type(priv); |
| |
| for_each_child_of_node(np, child) { |
| ret = aspeed_create_fan(dev, child, priv); |
| if (ret) { |
| of_node_put(child); |
| return ret; |
| } |
| } |
| |
| priv->groups[0] = &pwm_dev_group; |
| priv->groups[1] = &fan_dev_group; |
| priv->groups[2] = NULL; |
| hwmon = devm_hwmon_device_register_with_groups(dev, |
| "aspeed_pwm_tacho", |
| priv, priv->groups); |
| return PTR_ERR_OR_ZERO(hwmon); |
| } |
| |
| static const struct of_device_id of_pwm_tacho_match_table[] = { |
| { .compatible = "aspeed,ast2400-pwm-tacho", }, |
| { .compatible = "aspeed,ast2500-pwm-tacho", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, of_pwm_tacho_match_table); |
| |
| static struct platform_driver aspeed_pwm_tacho_driver = { |
| .probe = aspeed_pwm_tacho_probe, |
| .driver = { |
| .name = "aspeed_pwm_tacho", |
| .of_match_table = of_pwm_tacho_match_table, |
| }, |
| }; |
| |
| module_platform_driver(aspeed_pwm_tacho_driver); |
| |
| MODULE_AUTHOR("Jaghathiswari Rankappagounder Natarajan <jaghu@google.com>"); |
| MODULE_DESCRIPTION("ASPEED PWM and Fan Tacho device driver"); |
| MODULE_LICENSE("GPL"); |