| // SPDX-License-Identifier: GPL-2.0-only |
| #include <linux/err.h> |
| #include <linux/module.h> |
| #include <linux/reboot.h> |
| #include <linux/jiffies.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| |
| #include <loongson.h> |
| #include <boot_param.h> |
| #include <loongson_hwmon.h> |
| #include <loongson_regs.h> |
| |
| static int csr_temp_enable; |
| |
| /* |
| * Loongson-3 series cpu has two sensors inside, |
| * each of them from 0 to 255, |
| * if more than 127, that is dangerous. |
| * here only provide sensor1 data, because it always hot than sensor0 |
| */ |
| int loongson3_cpu_temp(int cpu) |
| { |
| u32 reg, prid_rev; |
| |
| if (csr_temp_enable) { |
| reg = (csr_readl(LOONGSON_CSR_CPUTEMP) & 0xff); |
| goto out; |
| } |
| |
| reg = LOONGSON_CHIPTEMP(cpu); |
| prid_rev = read_c0_prid() & PRID_REV_MASK; |
| |
| switch (prid_rev) { |
| case PRID_REV_LOONGSON3A_R1: |
| reg = (reg >> 8) & 0xff; |
| break; |
| case PRID_REV_LOONGSON3B_R1: |
| case PRID_REV_LOONGSON3B_R2: |
| case PRID_REV_LOONGSON3A_R2_0: |
| case PRID_REV_LOONGSON3A_R2_1: |
| reg = ((reg >> 8) & 0xff) - 100; |
| break; |
| case PRID_REV_LOONGSON3A_R3_0: |
| case PRID_REV_LOONGSON3A_R3_1: |
| default: |
| reg = (reg & 0xffff) * 731 / 0x4000 - 273; |
| break; |
| } |
| |
| out: |
| return (int)reg * 1000; |
| } |
| |
| static int nr_packages; |
| static struct device *cpu_hwmon_dev; |
| |
| static ssize_t cpu_temp_label(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| int id = (to_sensor_dev_attr(attr))->index - 1; |
| |
| return sprintf(buf, "CPU %d Temperature\n", id); |
| } |
| |
| static ssize_t get_cpu_temp(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| int id = (to_sensor_dev_attr(attr))->index - 1; |
| int value = loongson3_cpu_temp(id); |
| |
| return sprintf(buf, "%d\n", value); |
| } |
| |
| static SENSOR_DEVICE_ATTR(temp1_input, 0444, get_cpu_temp, NULL, 1); |
| static SENSOR_DEVICE_ATTR(temp1_label, 0444, cpu_temp_label, NULL, 1); |
| static SENSOR_DEVICE_ATTR(temp2_input, 0444, get_cpu_temp, NULL, 2); |
| static SENSOR_DEVICE_ATTR(temp2_label, 0444, cpu_temp_label, NULL, 2); |
| static SENSOR_DEVICE_ATTR(temp3_input, 0444, get_cpu_temp, NULL, 3); |
| static SENSOR_DEVICE_ATTR(temp3_label, 0444, cpu_temp_label, NULL, 3); |
| static SENSOR_DEVICE_ATTR(temp4_input, 0444, get_cpu_temp, NULL, 4); |
| static SENSOR_DEVICE_ATTR(temp4_label, 0444, cpu_temp_label, NULL, 4); |
| |
| static struct attribute *cpu_hwmon_attributes[] = { |
| &sensor_dev_attr_temp1_input.dev_attr.attr, |
| &sensor_dev_attr_temp1_label.dev_attr.attr, |
| &sensor_dev_attr_temp2_input.dev_attr.attr, |
| &sensor_dev_attr_temp2_label.dev_attr.attr, |
| &sensor_dev_attr_temp3_input.dev_attr.attr, |
| &sensor_dev_attr_temp3_label.dev_attr.attr, |
| &sensor_dev_attr_temp4_input.dev_attr.attr, |
| &sensor_dev_attr_temp4_label.dev_attr.attr, |
| NULL |
| }; |
| |
| static umode_t cpu_hwmon_is_visible(struct kobject *kobj, |
| struct attribute *attr, int i) |
| { |
| int id = i / 2; |
| |
| if (id < nr_packages) |
| return attr->mode; |
| return 0; |
| } |
| |
| static struct attribute_group cpu_hwmon_group = { |
| .attrs = cpu_hwmon_attributes, |
| .is_visible = cpu_hwmon_is_visible, |
| }; |
| |
| static const struct attribute_group *cpu_hwmon_groups[] = { |
| &cpu_hwmon_group, |
| NULL |
| }; |
| |
| #define CPU_THERMAL_THRESHOLD 90000 |
| static struct delayed_work thermal_work; |
| |
| static void do_thermal_timer(struct work_struct *work) |
| { |
| int i, value; |
| |
| for (i = 0; i < nr_packages; i++) { |
| value = loongson3_cpu_temp(i); |
| if (value > CPU_THERMAL_THRESHOLD) { |
| pr_emerg("Power off due to high temp: %d\n", value); |
| orderly_poweroff(true); |
| } |
| } |
| |
| schedule_delayed_work(&thermal_work, msecs_to_jiffies(5000)); |
| } |
| |
| static int __init loongson_hwmon_init(void) |
| { |
| pr_info("Loongson Hwmon Enter...\n"); |
| |
| if (cpu_has_csr()) |
| csr_temp_enable = csr_readl(LOONGSON_CSR_FEATURES) & |
| LOONGSON_CSRF_TEMP; |
| |
| nr_packages = loongson_sysconf.nr_cpus / |
| loongson_sysconf.cores_per_package; |
| |
| cpu_hwmon_dev = hwmon_device_register_with_groups(NULL, "cpu_hwmon", |
| NULL, cpu_hwmon_groups); |
| if (IS_ERR(cpu_hwmon_dev)) { |
| pr_err("hwmon_device_register fail!\n"); |
| return PTR_ERR(cpu_hwmon_dev); |
| } |
| |
| INIT_DEFERRABLE_WORK(&thermal_work, do_thermal_timer); |
| schedule_delayed_work(&thermal_work, msecs_to_jiffies(20000)); |
| |
| return 0; |
| } |
| |
| static void __exit loongson_hwmon_exit(void) |
| { |
| cancel_delayed_work_sync(&thermal_work); |
| hwmon_device_unregister(cpu_hwmon_dev); |
| } |
| |
| module_init(loongson_hwmon_init); |
| module_exit(loongson_hwmon_exit); |
| |
| MODULE_AUTHOR("Yu Xiang <xiangy@lemote.com>"); |
| MODULE_AUTHOR("Huacai Chen <chenhc@lemote.com>"); |
| MODULE_DESCRIPTION("Loongson CPU Hwmon driver"); |
| MODULE_LICENSE("GPL"); |