| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright IBM Corp. 2016, 2023 |
| * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com> |
| * |
| * Adjunct processor bus, queue related code. |
| */ |
| |
| #define KMSG_COMPONENT "ap" |
| #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt |
| |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <asm/facility.h> |
| |
| #include "ap_bus.h" |
| #include "ap_debug.h" |
| |
| static void __ap_flush_queue(struct ap_queue *aq); |
| |
| /* |
| * some AP queue helper functions |
| */ |
| |
| static inline bool ap_q_supports_bind(struct ap_queue *aq) |
| { |
| return aq->card->hwinfo.ep11 || aq->card->hwinfo.accel; |
| } |
| |
| static inline bool ap_q_supports_assoc(struct ap_queue *aq) |
| { |
| return aq->card->hwinfo.ep11; |
| } |
| |
| static inline bool ap_q_needs_bind(struct ap_queue *aq) |
| { |
| return ap_q_supports_bind(aq) && ap_sb_available(); |
| } |
| |
| /** |
| * ap_queue_enable_irq(): Enable interrupt support on this AP queue. |
| * @aq: The AP queue |
| * @ind: the notification indicator byte |
| * |
| * Enables interruption on AP queue via ap_aqic(). Based on the return |
| * value it waits a while and tests the AP queue if interrupts |
| * have been switched on using ap_test_queue(). |
| */ |
| static int ap_queue_enable_irq(struct ap_queue *aq, void *ind) |
| { |
| union ap_qirq_ctrl qirqctrl = { .value = 0 }; |
| struct ap_queue_status status; |
| |
| qirqctrl.ir = 1; |
| qirqctrl.isc = AP_ISC; |
| status = ap_aqic(aq->qid, qirqctrl, virt_to_phys(ind)); |
| if (status.async) |
| return -EPERM; |
| switch (status.response_code) { |
| case AP_RESPONSE_NORMAL: |
| case AP_RESPONSE_OTHERWISE_CHANGED: |
| return 0; |
| case AP_RESPONSE_Q_NOT_AVAIL: |
| case AP_RESPONSE_DECONFIGURED: |
| case AP_RESPONSE_CHECKSTOPPED: |
| case AP_RESPONSE_INVALID_ADDRESS: |
| pr_err("Registering adapter interrupts for AP device %02x.%04x failed\n", |
| AP_QID_CARD(aq->qid), |
| AP_QID_QUEUE(aq->qid)); |
| return -EOPNOTSUPP; |
| case AP_RESPONSE_RESET_IN_PROGRESS: |
| case AP_RESPONSE_BUSY: |
| default: |
| return -EBUSY; |
| } |
| } |
| |
| /** |
| * __ap_send(): Send message to adjunct processor queue. |
| * @qid: The AP queue number |
| * @psmid: The program supplied message identifier |
| * @msg: The message text |
| * @msglen: The message length |
| * @special: Special Bit |
| * |
| * Returns AP queue status structure. |
| * Condition code 1 on NQAP can't happen because the L bit is 1. |
| * Condition code 2 on NQAP also means the send is incomplete, |
| * because a segment boundary was reached. The NQAP is repeated. |
| */ |
| static inline struct ap_queue_status |
| __ap_send(ap_qid_t qid, unsigned long psmid, void *msg, size_t msglen, |
| int special) |
| { |
| if (special) |
| qid |= 0x400000UL; |
| return ap_nqap(qid, psmid, msg, msglen); |
| } |
| |
| /* State machine definitions and helpers */ |
| |
| static enum ap_sm_wait ap_sm_nop(struct ap_queue *aq) |
| { |
| return AP_SM_WAIT_NONE; |
| } |
| |
| /** |
| * ap_sm_recv(): Receive pending reply messages from an AP queue but do |
| * not change the state of the device. |
| * @aq: pointer to the AP queue |
| * |
| * Returns AP_SM_WAIT_NONE, AP_SM_WAIT_AGAIN, or AP_SM_WAIT_INTERRUPT |
| */ |
| static struct ap_queue_status ap_sm_recv(struct ap_queue *aq) |
| { |
| struct ap_queue_status status; |
| struct ap_message *ap_msg; |
| bool found = false; |
| size_t reslen; |
| unsigned long resgr0 = 0; |
| int parts = 0; |
| |
| /* |
| * DQAP loop until response code and resgr0 indicate that |
| * the msg is totally received. As we use the very same buffer |
| * the msg is overwritten with each invocation. That's intended |
| * and the receiver of the msg is informed with a msg rc code |
| * of EMSGSIZE in such a case. |
| */ |
| do { |
| status = ap_dqap(aq->qid, &aq->reply->psmid, |
| aq->reply->msg, aq->reply->bufsize, |
| &aq->reply->len, &reslen, &resgr0); |
| parts++; |
| } while (status.response_code == 0xFF && resgr0 != 0); |
| |
| switch (status.response_code) { |
| case AP_RESPONSE_NORMAL: |
| print_hex_dump_debug("aprpl: ", DUMP_PREFIX_ADDRESS, 16, 1, |
| aq->reply->msg, aq->reply->len, false); |
| aq->queue_count = max_t(int, 0, aq->queue_count - 1); |
| if (!status.queue_empty && !aq->queue_count) |
| aq->queue_count++; |
| if (aq->queue_count > 0) |
| mod_timer(&aq->timeout, |
| jiffies + aq->request_timeout); |
| list_for_each_entry(ap_msg, &aq->pendingq, list) { |
| if (ap_msg->psmid != aq->reply->psmid) |
| continue; |
| list_del_init(&ap_msg->list); |
| aq->pendingq_count--; |
| if (parts > 1) { |
| ap_msg->rc = -EMSGSIZE; |
| ap_msg->receive(aq, ap_msg, NULL); |
| } else { |
| ap_msg->receive(aq, ap_msg, aq->reply); |
| } |
| found = true; |
| break; |
| } |
| if (!found) { |
| AP_DBF_WARN("%s unassociated reply psmid=0x%016lx on 0x%02x.%04x\n", |
| __func__, aq->reply->psmid, |
| AP_QID_CARD(aq->qid), AP_QID_QUEUE(aq->qid)); |
| } |
| fallthrough; |
| case AP_RESPONSE_NO_PENDING_REPLY: |
| if (!status.queue_empty || aq->queue_count <= 0) |
| break; |
| /* The card shouldn't forget requests but who knows. */ |
| aq->queue_count = 0; |
| list_splice_init(&aq->pendingq, &aq->requestq); |
| aq->requestq_count += aq->pendingq_count; |
| pr_debug("%s queue 0x%02x.%04x rescheduled %d reqs (new req %d)\n", |
| __func__, AP_QID_CARD(aq->qid), AP_QID_QUEUE(aq->qid), |
| aq->pendingq_count, aq->requestq_count); |
| aq->pendingq_count = 0; |
| break; |
| default: |
| break; |
| } |
| return status; |
| } |
| |
| /** |
| * ap_sm_read(): Receive pending reply messages from an AP queue. |
| * @aq: pointer to the AP queue |
| * |
| * Returns AP_SM_WAIT_NONE, AP_SM_WAIT_AGAIN, or AP_SM_WAIT_INTERRUPT |
| */ |
| static enum ap_sm_wait ap_sm_read(struct ap_queue *aq) |
| { |
| struct ap_queue_status status; |
| |
| if (!aq->reply) |
| return AP_SM_WAIT_NONE; |
| status = ap_sm_recv(aq); |
| if (status.async) |
| return AP_SM_WAIT_NONE; |
| switch (status.response_code) { |
| case AP_RESPONSE_NORMAL: |
| if (aq->queue_count > 0) { |
| aq->sm_state = AP_SM_STATE_WORKING; |
| return AP_SM_WAIT_AGAIN; |
| } |
| aq->sm_state = AP_SM_STATE_IDLE; |
| break; |
| case AP_RESPONSE_NO_PENDING_REPLY: |
| if (aq->queue_count > 0) |
| return status.irq_enabled ? |
| AP_SM_WAIT_INTERRUPT : AP_SM_WAIT_HIGH_TIMEOUT; |
| aq->sm_state = AP_SM_STATE_IDLE; |
| break; |
| default: |
| aq->dev_state = AP_DEV_STATE_ERROR; |
| aq->last_err_rc = status.response_code; |
| AP_DBF_WARN("%s RC 0x%02x on 0x%02x.%04x -> AP_DEV_STATE_ERROR\n", |
| __func__, status.response_code, |
| AP_QID_CARD(aq->qid), AP_QID_QUEUE(aq->qid)); |
| return AP_SM_WAIT_NONE; |
| } |
| /* Check and maybe enable irq support (again) on this queue */ |
| if (!status.irq_enabled && status.queue_empty) { |
| void *lsi_ptr = ap_airq_ptr(); |
| |
| if (lsi_ptr && ap_queue_enable_irq(aq, lsi_ptr) == 0) { |
| aq->sm_state = AP_SM_STATE_SETIRQ_WAIT; |
| return AP_SM_WAIT_AGAIN; |
| } |
| } |
| return AP_SM_WAIT_NONE; |
| } |
| |
| /** |
| * ap_sm_write(): Send messages from the request queue to an AP queue. |
| * @aq: pointer to the AP queue |
| * |
| * Returns AP_SM_WAIT_NONE, AP_SM_WAIT_AGAIN, or AP_SM_WAIT_INTERRUPT |
| */ |
| static enum ap_sm_wait ap_sm_write(struct ap_queue *aq) |
| { |
| struct ap_queue_status status; |
| struct ap_message *ap_msg; |
| ap_qid_t qid = aq->qid; |
| |
| if (aq->requestq_count <= 0) |
| return AP_SM_WAIT_NONE; |
| |
| /* Start the next request on the queue. */ |
| ap_msg = list_entry(aq->requestq.next, struct ap_message, list); |
| print_hex_dump_debug("apreq: ", DUMP_PREFIX_ADDRESS, 16, 1, |
| ap_msg->msg, ap_msg->len, false); |
| status = __ap_send(qid, ap_msg->psmid, |
| ap_msg->msg, ap_msg->len, |
| ap_msg->flags & AP_MSG_FLAG_SPECIAL); |
| if (status.async) |
| return AP_SM_WAIT_NONE; |
| switch (status.response_code) { |
| case AP_RESPONSE_NORMAL: |
| aq->queue_count = max_t(int, 1, aq->queue_count + 1); |
| if (aq->queue_count == 1) |
| mod_timer(&aq->timeout, jiffies + aq->request_timeout); |
| list_move_tail(&ap_msg->list, &aq->pendingq); |
| aq->requestq_count--; |
| aq->pendingq_count++; |
| if (aq->queue_count < aq->card->hwinfo.qd) { |
| aq->sm_state = AP_SM_STATE_WORKING; |
| return AP_SM_WAIT_AGAIN; |
| } |
| fallthrough; |
| case AP_RESPONSE_Q_FULL: |
| aq->sm_state = AP_SM_STATE_QUEUE_FULL; |
| return status.irq_enabled ? |
| AP_SM_WAIT_INTERRUPT : AP_SM_WAIT_HIGH_TIMEOUT; |
| case AP_RESPONSE_RESET_IN_PROGRESS: |
| aq->sm_state = AP_SM_STATE_RESET_WAIT; |
| return AP_SM_WAIT_LOW_TIMEOUT; |
| case AP_RESPONSE_INVALID_DOMAIN: |
| AP_DBF_WARN("%s RESPONSE_INVALID_DOMAIN on NQAP\n", __func__); |
| fallthrough; |
| case AP_RESPONSE_MESSAGE_TOO_BIG: |
| case AP_RESPONSE_REQ_FAC_NOT_INST: |
| list_del_init(&ap_msg->list); |
| aq->requestq_count--; |
| ap_msg->rc = -EINVAL; |
| ap_msg->receive(aq, ap_msg, NULL); |
| return AP_SM_WAIT_AGAIN; |
| default: |
| aq->dev_state = AP_DEV_STATE_ERROR; |
| aq->last_err_rc = status.response_code; |
| AP_DBF_WARN("%s RC 0x%02x on 0x%02x.%04x -> AP_DEV_STATE_ERROR\n", |
| __func__, status.response_code, |
| AP_QID_CARD(aq->qid), AP_QID_QUEUE(aq->qid)); |
| return AP_SM_WAIT_NONE; |
| } |
| } |
| |
| /** |
| * ap_sm_read_write(): Send and receive messages to/from an AP queue. |
| * @aq: pointer to the AP queue |
| * |
| * Returns AP_SM_WAIT_NONE, AP_SM_WAIT_AGAIN, or AP_SM_WAIT_INTERRUPT |
| */ |
| static enum ap_sm_wait ap_sm_read_write(struct ap_queue *aq) |
| { |
| return min(ap_sm_read(aq), ap_sm_write(aq)); |
| } |
| |
| /** |
| * ap_sm_reset(): Reset an AP queue. |
| * @aq: The AP queue |
| * |
| * Submit the Reset command to an AP queue. |
| */ |
| static enum ap_sm_wait ap_sm_reset(struct ap_queue *aq) |
| { |
| struct ap_queue_status status; |
| |
| status = ap_rapq(aq->qid, aq->rapq_fbit); |
| if (status.async) |
| return AP_SM_WAIT_NONE; |
| switch (status.response_code) { |
| case AP_RESPONSE_NORMAL: |
| case AP_RESPONSE_RESET_IN_PROGRESS: |
| aq->sm_state = AP_SM_STATE_RESET_WAIT; |
| aq->rapq_fbit = 0; |
| return AP_SM_WAIT_LOW_TIMEOUT; |
| default: |
| aq->dev_state = AP_DEV_STATE_ERROR; |
| aq->last_err_rc = status.response_code; |
| AP_DBF_WARN("%s RC 0x%02x on 0x%02x.%04x -> AP_DEV_STATE_ERROR\n", |
| __func__, status.response_code, |
| AP_QID_CARD(aq->qid), AP_QID_QUEUE(aq->qid)); |
| return AP_SM_WAIT_NONE; |
| } |
| } |
| |
| /** |
| * ap_sm_reset_wait(): Test queue for completion of the reset operation |
| * @aq: pointer to the AP queue |
| * |
| * Returns AP_POLL_IMMEDIATELY, AP_POLL_AFTER_TIMEROUT or 0. |
| */ |
| static enum ap_sm_wait ap_sm_reset_wait(struct ap_queue *aq) |
| { |
| struct ap_queue_status status; |
| struct ap_tapq_hwinfo hwinfo; |
| void *lsi_ptr; |
| |
| /* Get the status with TAPQ */ |
| status = ap_test_queue(aq->qid, 1, &hwinfo); |
| |
| switch (status.response_code) { |
| case AP_RESPONSE_NORMAL: |
| aq->se_bstate = hwinfo.bs; |
| lsi_ptr = ap_airq_ptr(); |
| if (lsi_ptr && ap_queue_enable_irq(aq, lsi_ptr) == 0) |
| aq->sm_state = AP_SM_STATE_SETIRQ_WAIT; |
| else |
| aq->sm_state = (aq->queue_count > 0) ? |
| AP_SM_STATE_WORKING : AP_SM_STATE_IDLE; |
| return AP_SM_WAIT_AGAIN; |
| case AP_RESPONSE_BUSY: |
| case AP_RESPONSE_RESET_IN_PROGRESS: |
| return AP_SM_WAIT_LOW_TIMEOUT; |
| case AP_RESPONSE_Q_NOT_AVAIL: |
| case AP_RESPONSE_DECONFIGURED: |
| case AP_RESPONSE_CHECKSTOPPED: |
| default: |
| aq->dev_state = AP_DEV_STATE_ERROR; |
| aq->last_err_rc = status.response_code; |
| AP_DBF_WARN("%s RC 0x%02x on 0x%02x.%04x -> AP_DEV_STATE_ERROR\n", |
| __func__, status.response_code, |
| AP_QID_CARD(aq->qid), AP_QID_QUEUE(aq->qid)); |
| return AP_SM_WAIT_NONE; |
| } |
| } |
| |
| /** |
| * ap_sm_setirq_wait(): Test queue for completion of the irq enablement |
| * @aq: pointer to the AP queue |
| * |
| * Returns AP_POLL_IMMEDIATELY, AP_POLL_AFTER_TIMEROUT or 0. |
| */ |
| static enum ap_sm_wait ap_sm_setirq_wait(struct ap_queue *aq) |
| { |
| struct ap_queue_status status; |
| |
| if (aq->queue_count > 0 && aq->reply) |
| /* Try to read a completed message and get the status */ |
| status = ap_sm_recv(aq); |
| else |
| /* Get the status with TAPQ */ |
| status = ap_tapq(aq->qid, NULL); |
| |
| if (status.irq_enabled == 1) { |
| /* Irqs are now enabled */ |
| aq->sm_state = (aq->queue_count > 0) ? |
| AP_SM_STATE_WORKING : AP_SM_STATE_IDLE; |
| } |
| |
| switch (status.response_code) { |
| case AP_RESPONSE_NORMAL: |
| if (aq->queue_count > 0) |
| return AP_SM_WAIT_AGAIN; |
| fallthrough; |
| case AP_RESPONSE_NO_PENDING_REPLY: |
| return AP_SM_WAIT_LOW_TIMEOUT; |
| default: |
| aq->dev_state = AP_DEV_STATE_ERROR; |
| aq->last_err_rc = status.response_code; |
| AP_DBF_WARN("%s RC 0x%02x on 0x%02x.%04x -> AP_DEV_STATE_ERROR\n", |
| __func__, status.response_code, |
| AP_QID_CARD(aq->qid), AP_QID_QUEUE(aq->qid)); |
| return AP_SM_WAIT_NONE; |
| } |
| } |
| |
| /** |
| * ap_sm_assoc_wait(): Test queue for completion of a pending |
| * association request. |
| * @aq: pointer to the AP queue |
| */ |
| static enum ap_sm_wait ap_sm_assoc_wait(struct ap_queue *aq) |
| { |
| struct ap_queue_status status; |
| struct ap_tapq_hwinfo hwinfo; |
| |
| status = ap_test_queue(aq->qid, 1, &hwinfo); |
| /* handle asynchronous error on this queue */ |
| if (status.async && status.response_code) { |
| aq->dev_state = AP_DEV_STATE_ERROR; |
| aq->last_err_rc = status.response_code; |
| AP_DBF_WARN("%s asynch RC 0x%02x on 0x%02x.%04x -> AP_DEV_STATE_ERROR\n", |
| __func__, status.response_code, |
| AP_QID_CARD(aq->qid), AP_QID_QUEUE(aq->qid)); |
| return AP_SM_WAIT_NONE; |
| } |
| if (status.response_code > AP_RESPONSE_BUSY) { |
| aq->dev_state = AP_DEV_STATE_ERROR; |
| aq->last_err_rc = status.response_code; |
| AP_DBF_WARN("%s RC 0x%02x on 0x%02x.%04x -> AP_DEV_STATE_ERROR\n", |
| __func__, status.response_code, |
| AP_QID_CARD(aq->qid), AP_QID_QUEUE(aq->qid)); |
| return AP_SM_WAIT_NONE; |
| } |
| |
| /* update queue's SE bind state */ |
| aq->se_bstate = hwinfo.bs; |
| |
| /* check bs bits */ |
| switch (hwinfo.bs) { |
| case AP_BS_Q_USABLE: |
| /* association is through */ |
| aq->sm_state = AP_SM_STATE_IDLE; |
| pr_debug("%s queue 0x%02x.%04x associated with %u\n", |
| __func__, AP_QID_CARD(aq->qid), |
| AP_QID_QUEUE(aq->qid), aq->assoc_idx); |
| return AP_SM_WAIT_NONE; |
| case AP_BS_Q_USABLE_NO_SECURE_KEY: |
| /* association still pending */ |
| return AP_SM_WAIT_LOW_TIMEOUT; |
| default: |
| /* reset from 'outside' happened or no idea at all */ |
| aq->assoc_idx = ASSOC_IDX_INVALID; |
| aq->dev_state = AP_DEV_STATE_ERROR; |
| aq->last_err_rc = status.response_code; |
| AP_DBF_WARN("%s bs 0x%02x on 0x%02x.%04x -> AP_DEV_STATE_ERROR\n", |
| __func__, hwinfo.bs, |
| AP_QID_CARD(aq->qid), AP_QID_QUEUE(aq->qid)); |
| return AP_SM_WAIT_NONE; |
| } |
| } |
| |
| /* |
| * AP state machine jump table |
| */ |
| static ap_func_t *ap_jumptable[NR_AP_SM_STATES][NR_AP_SM_EVENTS] = { |
| [AP_SM_STATE_RESET_START] = { |
| [AP_SM_EVENT_POLL] = ap_sm_reset, |
| [AP_SM_EVENT_TIMEOUT] = ap_sm_nop, |
| }, |
| [AP_SM_STATE_RESET_WAIT] = { |
| [AP_SM_EVENT_POLL] = ap_sm_reset_wait, |
| [AP_SM_EVENT_TIMEOUT] = ap_sm_nop, |
| }, |
| [AP_SM_STATE_SETIRQ_WAIT] = { |
| [AP_SM_EVENT_POLL] = ap_sm_setirq_wait, |
| [AP_SM_EVENT_TIMEOUT] = ap_sm_nop, |
| }, |
| [AP_SM_STATE_IDLE] = { |
| [AP_SM_EVENT_POLL] = ap_sm_write, |
| [AP_SM_EVENT_TIMEOUT] = ap_sm_nop, |
| }, |
| [AP_SM_STATE_WORKING] = { |
| [AP_SM_EVENT_POLL] = ap_sm_read_write, |
| [AP_SM_EVENT_TIMEOUT] = ap_sm_reset, |
| }, |
| [AP_SM_STATE_QUEUE_FULL] = { |
| [AP_SM_EVENT_POLL] = ap_sm_read, |
| [AP_SM_EVENT_TIMEOUT] = ap_sm_reset, |
| }, |
| [AP_SM_STATE_ASSOC_WAIT] = { |
| [AP_SM_EVENT_POLL] = ap_sm_assoc_wait, |
| [AP_SM_EVENT_TIMEOUT] = ap_sm_reset, |
| }, |
| }; |
| |
| enum ap_sm_wait ap_sm_event(struct ap_queue *aq, enum ap_sm_event event) |
| { |
| if (aq->config && !aq->chkstop && |
| aq->dev_state > AP_DEV_STATE_UNINITIATED) |
| return ap_jumptable[aq->sm_state][event](aq); |
| else |
| return AP_SM_WAIT_NONE; |
| } |
| |
| enum ap_sm_wait ap_sm_event_loop(struct ap_queue *aq, enum ap_sm_event event) |
| { |
| enum ap_sm_wait wait; |
| |
| while ((wait = ap_sm_event(aq, event)) == AP_SM_WAIT_AGAIN) |
| ; |
| return wait; |
| } |
| |
| /* |
| * AP queue related attributes. |
| */ |
| static ssize_t request_count_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct ap_queue *aq = to_ap_queue(dev); |
| bool valid = false; |
| u64 req_cnt; |
| |
| spin_lock_bh(&aq->lock); |
| if (aq->dev_state > AP_DEV_STATE_UNINITIATED) { |
| req_cnt = aq->total_request_count; |
| valid = true; |
| } |
| spin_unlock_bh(&aq->lock); |
| |
| if (valid) |
| return sysfs_emit(buf, "%llu\n", req_cnt); |
| else |
| return sysfs_emit(buf, "-\n"); |
| } |
| |
| static ssize_t request_count_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct ap_queue *aq = to_ap_queue(dev); |
| |
| spin_lock_bh(&aq->lock); |
| aq->total_request_count = 0; |
| spin_unlock_bh(&aq->lock); |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR_RW(request_count); |
| |
| static ssize_t requestq_count_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ap_queue *aq = to_ap_queue(dev); |
| unsigned int reqq_cnt = 0; |
| |
| spin_lock_bh(&aq->lock); |
| if (aq->dev_state > AP_DEV_STATE_UNINITIATED) |
| reqq_cnt = aq->requestq_count; |
| spin_unlock_bh(&aq->lock); |
| return sysfs_emit(buf, "%d\n", reqq_cnt); |
| } |
| |
| static DEVICE_ATTR_RO(requestq_count); |
| |
| static ssize_t pendingq_count_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ap_queue *aq = to_ap_queue(dev); |
| unsigned int penq_cnt = 0; |
| |
| spin_lock_bh(&aq->lock); |
| if (aq->dev_state > AP_DEV_STATE_UNINITIATED) |
| penq_cnt = aq->pendingq_count; |
| spin_unlock_bh(&aq->lock); |
| return sysfs_emit(buf, "%d\n", penq_cnt); |
| } |
| |
| static DEVICE_ATTR_RO(pendingq_count); |
| |
| static ssize_t reset_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ap_queue *aq = to_ap_queue(dev); |
| int rc = 0; |
| |
| spin_lock_bh(&aq->lock); |
| switch (aq->sm_state) { |
| case AP_SM_STATE_RESET_START: |
| case AP_SM_STATE_RESET_WAIT: |
| rc = sysfs_emit(buf, "Reset in progress.\n"); |
| break; |
| case AP_SM_STATE_WORKING: |
| case AP_SM_STATE_QUEUE_FULL: |
| rc = sysfs_emit(buf, "Reset Timer armed.\n"); |
| break; |
| default: |
| rc = sysfs_emit(buf, "No Reset Timer set.\n"); |
| } |
| spin_unlock_bh(&aq->lock); |
| return rc; |
| } |
| |
| static ssize_t reset_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct ap_queue *aq = to_ap_queue(dev); |
| |
| spin_lock_bh(&aq->lock); |
| __ap_flush_queue(aq); |
| aq->sm_state = AP_SM_STATE_RESET_START; |
| ap_wait(ap_sm_event(aq, AP_SM_EVENT_POLL)); |
| spin_unlock_bh(&aq->lock); |
| |
| AP_DBF_INFO("%s reset queue=%02x.%04x triggered by user\n", |
| __func__, AP_QID_CARD(aq->qid), AP_QID_QUEUE(aq->qid)); |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR_RW(reset); |
| |
| static ssize_t interrupt_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ap_queue *aq = to_ap_queue(dev); |
| struct ap_queue_status status; |
| int rc = 0; |
| |
| spin_lock_bh(&aq->lock); |
| if (aq->sm_state == AP_SM_STATE_SETIRQ_WAIT) { |
| rc = sysfs_emit(buf, "Enable Interrupt pending.\n"); |
| } else { |
| status = ap_tapq(aq->qid, NULL); |
| if (status.irq_enabled) |
| rc = sysfs_emit(buf, "Interrupts enabled.\n"); |
| else |
| rc = sysfs_emit(buf, "Interrupts disabled.\n"); |
| } |
| spin_unlock_bh(&aq->lock); |
| |
| return rc; |
| } |
| |
| static DEVICE_ATTR_RO(interrupt); |
| |
| static ssize_t config_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ap_queue *aq = to_ap_queue(dev); |
| int rc; |
| |
| spin_lock_bh(&aq->lock); |
| rc = sysfs_emit(buf, "%d\n", aq->config ? 1 : 0); |
| spin_unlock_bh(&aq->lock); |
| return rc; |
| } |
| |
| static DEVICE_ATTR_RO(config); |
| |
| static ssize_t chkstop_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ap_queue *aq = to_ap_queue(dev); |
| int rc; |
| |
| spin_lock_bh(&aq->lock); |
| rc = sysfs_emit(buf, "%d\n", aq->chkstop ? 1 : 0); |
| spin_unlock_bh(&aq->lock); |
| return rc; |
| } |
| |
| static DEVICE_ATTR_RO(chkstop); |
| |
| static ssize_t ap_functions_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ap_queue *aq = to_ap_queue(dev); |
| struct ap_queue_status status; |
| struct ap_tapq_hwinfo hwinfo; |
| |
| status = ap_test_queue(aq->qid, 1, &hwinfo); |
| if (status.response_code > AP_RESPONSE_BUSY) { |
| pr_debug("%s RC 0x%02x on tapq(0x%02x.%04x)\n", |
| __func__, status.response_code, |
| AP_QID_CARD(aq->qid), AP_QID_QUEUE(aq->qid)); |
| return -EIO; |
| } |
| |
| return sysfs_emit(buf, "0x%08X\n", hwinfo.fac); |
| } |
| |
| static DEVICE_ATTR_RO(ap_functions); |
| |
| #ifdef CONFIG_ZCRYPT_DEBUG |
| static ssize_t states_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ap_queue *aq = to_ap_queue(dev); |
| int rc = 0; |
| |
| spin_lock_bh(&aq->lock); |
| /* queue device state */ |
| switch (aq->dev_state) { |
| case AP_DEV_STATE_UNINITIATED: |
| rc = sysfs_emit(buf, "UNINITIATED\n"); |
| break; |
| case AP_DEV_STATE_OPERATING: |
| rc = sysfs_emit(buf, "OPERATING"); |
| break; |
| case AP_DEV_STATE_SHUTDOWN: |
| rc = sysfs_emit(buf, "SHUTDOWN"); |
| break; |
| case AP_DEV_STATE_ERROR: |
| rc = sysfs_emit(buf, "ERROR"); |
| break; |
| default: |
| rc = sysfs_emit(buf, "UNKNOWN"); |
| } |
| /* state machine state */ |
| if (aq->dev_state) { |
| switch (aq->sm_state) { |
| case AP_SM_STATE_RESET_START: |
| rc += sysfs_emit_at(buf, rc, " [RESET_START]\n"); |
| break; |
| case AP_SM_STATE_RESET_WAIT: |
| rc += sysfs_emit_at(buf, rc, " [RESET_WAIT]\n"); |
| break; |
| case AP_SM_STATE_SETIRQ_WAIT: |
| rc += sysfs_emit_at(buf, rc, " [SETIRQ_WAIT]\n"); |
| break; |
| case AP_SM_STATE_IDLE: |
| rc += sysfs_emit_at(buf, rc, " [IDLE]\n"); |
| break; |
| case AP_SM_STATE_WORKING: |
| rc += sysfs_emit_at(buf, rc, " [WORKING]\n"); |
| break; |
| case AP_SM_STATE_QUEUE_FULL: |
| rc += sysfs_emit_at(buf, rc, " [FULL]\n"); |
| break; |
| case AP_SM_STATE_ASSOC_WAIT: |
| rc += sysfs_emit_at(buf, rc, " [ASSOC_WAIT]\n"); |
| break; |
| default: |
| rc += sysfs_emit_at(buf, rc, " [UNKNOWN]\n"); |
| } |
| } |
| spin_unlock_bh(&aq->lock); |
| |
| return rc; |
| } |
| static DEVICE_ATTR_RO(states); |
| |
| static ssize_t last_err_rc_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ap_queue *aq = to_ap_queue(dev); |
| int rc; |
| |
| spin_lock_bh(&aq->lock); |
| rc = aq->last_err_rc; |
| spin_unlock_bh(&aq->lock); |
| |
| switch (rc) { |
| case AP_RESPONSE_NORMAL: |
| return sysfs_emit(buf, "NORMAL\n"); |
| case AP_RESPONSE_Q_NOT_AVAIL: |
| return sysfs_emit(buf, "Q_NOT_AVAIL\n"); |
| case AP_RESPONSE_RESET_IN_PROGRESS: |
| return sysfs_emit(buf, "RESET_IN_PROGRESS\n"); |
| case AP_RESPONSE_DECONFIGURED: |
| return sysfs_emit(buf, "DECONFIGURED\n"); |
| case AP_RESPONSE_CHECKSTOPPED: |
| return sysfs_emit(buf, "CHECKSTOPPED\n"); |
| case AP_RESPONSE_BUSY: |
| return sysfs_emit(buf, "BUSY\n"); |
| case AP_RESPONSE_INVALID_ADDRESS: |
| return sysfs_emit(buf, "INVALID_ADDRESS\n"); |
| case AP_RESPONSE_OTHERWISE_CHANGED: |
| return sysfs_emit(buf, "OTHERWISE_CHANGED\n"); |
| case AP_RESPONSE_Q_FULL: |
| return sysfs_emit(buf, "Q_FULL/NO_PENDING_REPLY\n"); |
| case AP_RESPONSE_INDEX_TOO_BIG: |
| return sysfs_emit(buf, "INDEX_TOO_BIG\n"); |
| case AP_RESPONSE_NO_FIRST_PART: |
| return sysfs_emit(buf, "NO_FIRST_PART\n"); |
| case AP_RESPONSE_MESSAGE_TOO_BIG: |
| return sysfs_emit(buf, "MESSAGE_TOO_BIG\n"); |
| case AP_RESPONSE_REQ_FAC_NOT_INST: |
| return sysfs_emit(buf, "REQ_FAC_NOT_INST\n"); |
| default: |
| return sysfs_emit(buf, "response code %d\n", rc); |
| } |
| } |
| static DEVICE_ATTR_RO(last_err_rc); |
| #endif |
| |
| static struct attribute *ap_queue_dev_attrs[] = { |
| &dev_attr_request_count.attr, |
| &dev_attr_requestq_count.attr, |
| &dev_attr_pendingq_count.attr, |
| &dev_attr_reset.attr, |
| &dev_attr_interrupt.attr, |
| &dev_attr_config.attr, |
| &dev_attr_chkstop.attr, |
| &dev_attr_ap_functions.attr, |
| #ifdef CONFIG_ZCRYPT_DEBUG |
| &dev_attr_states.attr, |
| &dev_attr_last_err_rc.attr, |
| #endif |
| NULL |
| }; |
| |
| static struct attribute_group ap_queue_dev_attr_group = { |
| .attrs = ap_queue_dev_attrs |
| }; |
| |
| static const struct attribute_group *ap_queue_dev_attr_groups[] = { |
| &ap_queue_dev_attr_group, |
| NULL |
| }; |
| |
| static struct device_type ap_queue_type = { |
| .name = "ap_queue", |
| .groups = ap_queue_dev_attr_groups, |
| }; |
| |
| static ssize_t se_bind_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ap_queue *aq = to_ap_queue(dev); |
| struct ap_queue_status status; |
| struct ap_tapq_hwinfo hwinfo; |
| |
| if (!ap_q_supports_bind(aq)) |
| return sysfs_emit(buf, "-\n"); |
| |
| status = ap_test_queue(aq->qid, 1, &hwinfo); |
| if (status.response_code > AP_RESPONSE_BUSY) { |
| pr_debug("%s RC 0x%02x on tapq(0x%02x.%04x)\n", |
| __func__, status.response_code, |
| AP_QID_CARD(aq->qid), AP_QID_QUEUE(aq->qid)); |
| return -EIO; |
| } |
| |
| /* update queue's SE bind state */ |
| spin_lock_bh(&aq->lock); |
| aq->se_bstate = hwinfo.bs; |
| spin_unlock_bh(&aq->lock); |
| |
| switch (hwinfo.bs) { |
| case AP_BS_Q_USABLE: |
| case AP_BS_Q_USABLE_NO_SECURE_KEY: |
| return sysfs_emit(buf, "bound\n"); |
| default: |
| return sysfs_emit(buf, "unbound\n"); |
| } |
| } |
| |
| static ssize_t se_bind_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct ap_queue *aq = to_ap_queue(dev); |
| struct ap_queue_status status; |
| struct ap_tapq_hwinfo hwinfo; |
| bool value; |
| int rc; |
| |
| if (!ap_q_supports_bind(aq)) |
| return -EINVAL; |
| |
| /* only 0 (unbind) and 1 (bind) allowed */ |
| rc = kstrtobool(buf, &value); |
| if (rc) |
| return rc; |
| |
| if (!value) { |
| /* Unbind. Set F bit arg and trigger RAPQ */ |
| spin_lock_bh(&aq->lock); |
| __ap_flush_queue(aq); |
| aq->rapq_fbit = 1; |
| _ap_queue_init_state(aq); |
| rc = count; |
| goto out; |
| } |
| |
| /* Bind. Check current SE bind state */ |
| status = ap_test_queue(aq->qid, 1, &hwinfo); |
| if (status.response_code) { |
| AP_DBF_WARN("%s RC 0x%02x on tapq(0x%02x.%04x)\n", |
| __func__, status.response_code, |
| AP_QID_CARD(aq->qid), AP_QID_QUEUE(aq->qid)); |
| return -EIO; |
| } |
| |
| /* Update BS state */ |
| spin_lock_bh(&aq->lock); |
| aq->se_bstate = hwinfo.bs; |
| if (hwinfo.bs != AP_BS_Q_AVAIL_FOR_BINDING) { |
| AP_DBF_WARN("%s bind attempt with bs %d on queue 0x%02x.%04x\n", |
| __func__, hwinfo.bs, |
| AP_QID_CARD(aq->qid), AP_QID_QUEUE(aq->qid)); |
| rc = -EINVAL; |
| goto out; |
| } |
| |
| /* Check SM state */ |
| if (aq->sm_state < AP_SM_STATE_IDLE) { |
| rc = -EBUSY; |
| goto out; |
| } |
| |
| /* invoke BAPQ */ |
| status = ap_bapq(aq->qid); |
| if (status.response_code) { |
| AP_DBF_WARN("%s RC 0x%02x on bapq(0x%02x.%04x)\n", |
| __func__, status.response_code, |
| AP_QID_CARD(aq->qid), AP_QID_QUEUE(aq->qid)); |
| rc = -EIO; |
| goto out; |
| } |
| aq->assoc_idx = ASSOC_IDX_INVALID; |
| |
| /* verify SE bind state */ |
| status = ap_test_queue(aq->qid, 1, &hwinfo); |
| if (status.response_code) { |
| AP_DBF_WARN("%s RC 0x%02x on tapq(0x%02x.%04x)\n", |
| __func__, status.response_code, |
| AP_QID_CARD(aq->qid), AP_QID_QUEUE(aq->qid)); |
| rc = -EIO; |
| goto out; |
| } |
| aq->se_bstate = hwinfo.bs; |
| if (!(hwinfo.bs == AP_BS_Q_USABLE || |
| hwinfo.bs == AP_BS_Q_USABLE_NO_SECURE_KEY)) { |
| AP_DBF_WARN("%s BAPQ success, but bs shows %d on queue 0x%02x.%04x\n", |
| __func__, hwinfo.bs, |
| AP_QID_CARD(aq->qid), AP_QID_QUEUE(aq->qid)); |
| rc = -EIO; |
| goto out; |
| } |
| |
| /* SE bind was successful */ |
| AP_DBF_INFO("%s bapq(0x%02x.%04x) success\n", __func__, |
| AP_QID_CARD(aq->qid), AP_QID_QUEUE(aq->qid)); |
| rc = count; |
| |
| out: |
| spin_unlock_bh(&aq->lock); |
| return rc; |
| } |
| |
| static DEVICE_ATTR_RW(se_bind); |
| |
| static ssize_t se_associate_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ap_queue *aq = to_ap_queue(dev); |
| struct ap_queue_status status; |
| struct ap_tapq_hwinfo hwinfo; |
| |
| if (!ap_q_supports_assoc(aq)) |
| return sysfs_emit(buf, "-\n"); |
| |
| status = ap_test_queue(aq->qid, 1, &hwinfo); |
| if (status.response_code > AP_RESPONSE_BUSY) { |
| pr_debug("%s RC 0x%02x on tapq(0x%02x.%04x)\n", |
| __func__, status.response_code, |
| AP_QID_CARD(aq->qid), AP_QID_QUEUE(aq->qid)); |
| return -EIO; |
| } |
| |
| /* update queue's SE bind state */ |
| spin_lock_bh(&aq->lock); |
| aq->se_bstate = hwinfo.bs; |
| spin_unlock_bh(&aq->lock); |
| |
| switch (hwinfo.bs) { |
| case AP_BS_Q_USABLE: |
| if (aq->assoc_idx == ASSOC_IDX_INVALID) { |
| AP_DBF_WARN("%s AP_BS_Q_USABLE but invalid assoc_idx\n", __func__); |
| return -EIO; |
| } |
| return sysfs_emit(buf, "associated %u\n", aq->assoc_idx); |
| case AP_BS_Q_USABLE_NO_SECURE_KEY: |
| if (aq->assoc_idx != ASSOC_IDX_INVALID) |
| return sysfs_emit(buf, "association pending\n"); |
| fallthrough; |
| default: |
| return sysfs_emit(buf, "unassociated\n"); |
| } |
| } |
| |
| static ssize_t se_associate_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct ap_queue *aq = to_ap_queue(dev); |
| struct ap_queue_status status; |
| struct ap_tapq_hwinfo hwinfo; |
| unsigned int value; |
| int rc; |
| |
| if (!ap_q_supports_assoc(aq)) |
| return -EINVAL; |
| |
| /* association index needs to be >= 0 */ |
| rc = kstrtouint(buf, 0, &value); |
| if (rc) |
| return rc; |
| if (value >= ASSOC_IDX_INVALID) |
| return -EINVAL; |
| |
| /* check current SE bind state */ |
| status = ap_test_queue(aq->qid, 1, &hwinfo); |
| if (status.response_code) { |
| AP_DBF_WARN("%s RC 0x%02x on tapq(0x%02x.%04x)\n", |
| __func__, status.response_code, |
| AP_QID_CARD(aq->qid), AP_QID_QUEUE(aq->qid)); |
| return -EIO; |
| } |
| spin_lock_bh(&aq->lock); |
| aq->se_bstate = hwinfo.bs; |
| if (hwinfo.bs != AP_BS_Q_USABLE_NO_SECURE_KEY) { |
| AP_DBF_WARN("%s association attempt with bs %d on queue 0x%02x.%04x\n", |
| __func__, hwinfo.bs, |
| AP_QID_CARD(aq->qid), AP_QID_QUEUE(aq->qid)); |
| rc = -EINVAL; |
| goto out; |
| } |
| |
| /* check SM state */ |
| if (aq->sm_state != AP_SM_STATE_IDLE) { |
| rc = -EBUSY; |
| goto out; |
| } |
| |
| /* trigger the asynchronous association request */ |
| status = ap_aapq(aq->qid, value); |
| switch (status.response_code) { |
| case AP_RESPONSE_NORMAL: |
| case AP_RESPONSE_STATE_CHANGE_IN_PROGRESS: |
| aq->sm_state = AP_SM_STATE_ASSOC_WAIT; |
| aq->assoc_idx = value; |
| ap_wait(ap_sm_event(aq, AP_SM_EVENT_POLL)); |
| break; |
| default: |
| AP_DBF_WARN("%s RC 0x%02x on aapq(0x%02x.%04x)\n", |
| __func__, status.response_code, |
| AP_QID_CARD(aq->qid), AP_QID_QUEUE(aq->qid)); |
| rc = -EIO; |
| goto out; |
| } |
| |
| rc = count; |
| |
| out: |
| spin_unlock_bh(&aq->lock); |
| return rc; |
| } |
| |
| static DEVICE_ATTR_RW(se_associate); |
| |
| static struct attribute *ap_queue_dev_sb_attrs[] = { |
| &dev_attr_se_bind.attr, |
| &dev_attr_se_associate.attr, |
| NULL |
| }; |
| |
| static struct attribute_group ap_queue_dev_sb_attr_group = { |
| .attrs = ap_queue_dev_sb_attrs |
| }; |
| |
| static const struct attribute_group *ap_queue_dev_sb_attr_groups[] = { |
| &ap_queue_dev_sb_attr_group, |
| NULL |
| }; |
| |
| static void ap_queue_device_release(struct device *dev) |
| { |
| struct ap_queue *aq = to_ap_queue(dev); |
| |
| spin_lock_bh(&ap_queues_lock); |
| hash_del(&aq->hnode); |
| spin_unlock_bh(&ap_queues_lock); |
| |
| kfree(aq); |
| } |
| |
| struct ap_queue *ap_queue_create(ap_qid_t qid, int device_type) |
| { |
| struct ap_queue *aq; |
| |
| aq = kzalloc(sizeof(*aq), GFP_KERNEL); |
| if (!aq) |
| return NULL; |
| aq->ap_dev.device.release = ap_queue_device_release; |
| aq->ap_dev.device.type = &ap_queue_type; |
| aq->ap_dev.device_type = device_type; |
| // add optional SE secure binding attributes group |
| if (ap_sb_available() && is_prot_virt_guest()) |
| aq->ap_dev.device.groups = ap_queue_dev_sb_attr_groups; |
| aq->qid = qid; |
| spin_lock_init(&aq->lock); |
| INIT_LIST_HEAD(&aq->pendingq); |
| INIT_LIST_HEAD(&aq->requestq); |
| timer_setup(&aq->timeout, ap_request_timeout, 0); |
| |
| return aq; |
| } |
| |
| void ap_queue_init_reply(struct ap_queue *aq, struct ap_message *reply) |
| { |
| aq->reply = reply; |
| |
| spin_lock_bh(&aq->lock); |
| ap_wait(ap_sm_event(aq, AP_SM_EVENT_POLL)); |
| spin_unlock_bh(&aq->lock); |
| } |
| EXPORT_SYMBOL(ap_queue_init_reply); |
| |
| /** |
| * ap_queue_message(): Queue a request to an AP device. |
| * @aq: The AP device to queue the message to |
| * @ap_msg: The message that is to be added |
| */ |
| int ap_queue_message(struct ap_queue *aq, struct ap_message *ap_msg) |
| { |
| int rc = 0; |
| |
| /* msg needs to have a valid receive-callback */ |
| BUG_ON(!ap_msg->receive); |
| |
| spin_lock_bh(&aq->lock); |
| |
| /* only allow to queue new messages if device state is ok */ |
| if (aq->dev_state == AP_DEV_STATE_OPERATING) { |
| list_add_tail(&ap_msg->list, &aq->requestq); |
| aq->requestq_count++; |
| aq->total_request_count++; |
| atomic64_inc(&aq->card->total_request_count); |
| } else { |
| rc = -ENODEV; |
| } |
| |
| /* Send/receive as many request from the queue as possible. */ |
| ap_wait(ap_sm_event_loop(aq, AP_SM_EVENT_POLL)); |
| |
| spin_unlock_bh(&aq->lock); |
| |
| return rc; |
| } |
| EXPORT_SYMBOL(ap_queue_message); |
| |
| /** |
| * ap_queue_usable(): Check if queue is usable just now. |
| * @aq: The AP queue device to test for usability. |
| * This function is intended for the scheduler to query if it makes |
| * sense to enqueue a message into this AP queue device by calling |
| * ap_queue_message(). The perspective is very short-term as the |
| * state machine and device state(s) may change at any time. |
| */ |
| bool ap_queue_usable(struct ap_queue *aq) |
| { |
| bool rc = true; |
| |
| spin_lock_bh(&aq->lock); |
| |
| /* check for not configured or checkstopped */ |
| if (!aq->config || aq->chkstop) { |
| rc = false; |
| goto unlock_and_out; |
| } |
| |
| /* device state needs to be ok */ |
| if (aq->dev_state != AP_DEV_STATE_OPERATING) { |
| rc = false; |
| goto unlock_and_out; |
| } |
| |
| /* SE guest's queues additionally need to be bound */ |
| if (ap_q_needs_bind(aq) && |
| !(aq->se_bstate == AP_BS_Q_USABLE || |
| aq->se_bstate == AP_BS_Q_USABLE_NO_SECURE_KEY)) |
| rc = false; |
| |
| unlock_and_out: |
| spin_unlock_bh(&aq->lock); |
| return rc; |
| } |
| EXPORT_SYMBOL(ap_queue_usable); |
| |
| /** |
| * ap_cancel_message(): Cancel a crypto request. |
| * @aq: The AP device that has the message queued |
| * @ap_msg: The message that is to be removed |
| * |
| * Cancel a crypto request. This is done by removing the request |
| * from the device pending or request queue. Note that the |
| * request stays on the AP queue. When it finishes the message |
| * reply will be discarded because the psmid can't be found. |
| */ |
| void ap_cancel_message(struct ap_queue *aq, struct ap_message *ap_msg) |
| { |
| struct ap_message *tmp; |
| |
| spin_lock_bh(&aq->lock); |
| if (!list_empty(&ap_msg->list)) { |
| list_for_each_entry(tmp, &aq->pendingq, list) |
| if (tmp->psmid == ap_msg->psmid) { |
| aq->pendingq_count--; |
| goto found; |
| } |
| aq->requestq_count--; |
| found: |
| list_del_init(&ap_msg->list); |
| } |
| spin_unlock_bh(&aq->lock); |
| } |
| EXPORT_SYMBOL(ap_cancel_message); |
| |
| /** |
| * __ap_flush_queue(): Flush requests. |
| * @aq: Pointer to the AP queue |
| * |
| * Flush all requests from the request/pending queue of an AP device. |
| */ |
| static void __ap_flush_queue(struct ap_queue *aq) |
| { |
| struct ap_message *ap_msg, *next; |
| |
| list_for_each_entry_safe(ap_msg, next, &aq->pendingq, list) { |
| list_del_init(&ap_msg->list); |
| aq->pendingq_count--; |
| ap_msg->rc = -EAGAIN; |
| ap_msg->receive(aq, ap_msg, NULL); |
| } |
| list_for_each_entry_safe(ap_msg, next, &aq->requestq, list) { |
| list_del_init(&ap_msg->list); |
| aq->requestq_count--; |
| ap_msg->rc = -EAGAIN; |
| ap_msg->receive(aq, ap_msg, NULL); |
| } |
| aq->queue_count = 0; |
| } |
| |
| void ap_flush_queue(struct ap_queue *aq) |
| { |
| spin_lock_bh(&aq->lock); |
| __ap_flush_queue(aq); |
| spin_unlock_bh(&aq->lock); |
| } |
| EXPORT_SYMBOL(ap_flush_queue); |
| |
| void ap_queue_prepare_remove(struct ap_queue *aq) |
| { |
| spin_lock_bh(&aq->lock); |
| /* flush queue */ |
| __ap_flush_queue(aq); |
| /* move queue device state to SHUTDOWN in progress */ |
| aq->dev_state = AP_DEV_STATE_SHUTDOWN; |
| spin_unlock_bh(&aq->lock); |
| del_timer_sync(&aq->timeout); |
| } |
| |
| void ap_queue_remove(struct ap_queue *aq) |
| { |
| /* |
| * all messages have been flushed and the device state |
| * is SHUTDOWN. Now reset with zero which also clears |
| * the irq registration and move the device state |
| * to the initial value AP_DEV_STATE_UNINITIATED. |
| */ |
| spin_lock_bh(&aq->lock); |
| ap_zapq(aq->qid, 0); |
| aq->dev_state = AP_DEV_STATE_UNINITIATED; |
| spin_unlock_bh(&aq->lock); |
| } |
| |
| void _ap_queue_init_state(struct ap_queue *aq) |
| { |
| aq->dev_state = AP_DEV_STATE_OPERATING; |
| aq->sm_state = AP_SM_STATE_RESET_START; |
| aq->last_err_rc = 0; |
| aq->assoc_idx = ASSOC_IDX_INVALID; |
| ap_wait(ap_sm_event(aq, AP_SM_EVENT_POLL)); |
| } |
| |
| void ap_queue_init_state(struct ap_queue *aq) |
| { |
| spin_lock_bh(&aq->lock); |
| _ap_queue_init_state(aq); |
| spin_unlock_bh(&aq->lock); |
| } |
| EXPORT_SYMBOL(ap_queue_init_state); |