| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * NEC NL8048HL11 Panel Driver |
| * |
| * Copyright (C) 2019 Texas Instruments Incorporated |
| * |
| * Based on the omapdrm-specific panel-nec-nl8048hl11 driver |
| * |
| * Copyright (C) 2010 Texas Instruments Incorporated |
| * Author: Erik Gilling <konkers@android.com> |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/module.h> |
| #include <linux/pm.h> |
| #include <linux/spi/spi.h> |
| |
| #include <drm/drm_connector.h> |
| #include <drm/drm_modes.h> |
| #include <drm/drm_panel.h> |
| |
| struct nl8048_panel { |
| struct drm_panel panel; |
| |
| struct spi_device *spi; |
| struct gpio_desc *reset_gpio; |
| }; |
| |
| #define to_nl8048_device(p) container_of(p, struct nl8048_panel, panel) |
| |
| static int nl8048_write(struct nl8048_panel *lcd, unsigned char addr, |
| unsigned char value) |
| { |
| u8 data[4] = { value, 0x01, addr, 0x00 }; |
| int ret; |
| |
| ret = spi_write(lcd->spi, data, sizeof(data)); |
| if (ret) |
| dev_err(&lcd->spi->dev, "SPI write to %u failed: %d\n", |
| addr, ret); |
| |
| return ret; |
| } |
| |
| static int nl8048_init(struct nl8048_panel *lcd) |
| { |
| static const struct { |
| unsigned char addr; |
| unsigned char data; |
| } nl8048_init_seq[] = { |
| { 3, 0x01 }, { 0, 0x00 }, { 1, 0x01 }, { 4, 0x00 }, |
| { 5, 0x14 }, { 6, 0x24 }, { 16, 0xd7 }, { 17, 0x00 }, |
| { 18, 0x00 }, { 19, 0x55 }, { 20, 0x01 }, { 21, 0x70 }, |
| { 22, 0x1e }, { 23, 0x25 }, { 24, 0x25 }, { 25, 0x02 }, |
| { 26, 0x02 }, { 27, 0xa0 }, { 32, 0x2f }, { 33, 0x0f }, |
| { 34, 0x0f }, { 35, 0x0f }, { 36, 0x0f }, { 37, 0x0f }, |
| { 38, 0x0f }, { 39, 0x00 }, { 40, 0x02 }, { 41, 0x02 }, |
| { 42, 0x02 }, { 43, 0x0f }, { 44, 0x0f }, { 45, 0x0f }, |
| { 46, 0x0f }, { 47, 0x0f }, { 48, 0x0f }, { 49, 0x0f }, |
| { 50, 0x00 }, { 51, 0x02 }, { 52, 0x02 }, { 53, 0x02 }, |
| { 80, 0x0c }, { 83, 0x42 }, { 84, 0x42 }, { 85, 0x41 }, |
| { 86, 0x14 }, { 89, 0x88 }, { 90, 0x01 }, { 91, 0x00 }, |
| { 92, 0x02 }, { 93, 0x0c }, { 94, 0x1c }, { 95, 0x27 }, |
| { 98, 0x49 }, { 99, 0x27 }, { 102, 0x76 }, { 103, 0x27 }, |
| { 112, 0x01 }, { 113, 0x0e }, { 114, 0x02 }, { 115, 0x0c }, |
| { 118, 0x0c }, { 121, 0x30 }, { 130, 0x00 }, { 131, 0x00 }, |
| { 132, 0xfc }, { 134, 0x00 }, { 136, 0x00 }, { 138, 0x00 }, |
| { 139, 0x00 }, { 140, 0x00 }, { 141, 0xfc }, { 143, 0x00 }, |
| { 145, 0x00 }, { 147, 0x00 }, { 148, 0x00 }, { 149, 0x00 }, |
| { 150, 0xfc }, { 152, 0x00 }, { 154, 0x00 }, { 156, 0x00 }, |
| { 157, 0x00 }, |
| }; |
| |
| unsigned int i; |
| int ret; |
| |
| for (i = 0; i < ARRAY_SIZE(nl8048_init_seq); ++i) { |
| ret = nl8048_write(lcd, nl8048_init_seq[i].addr, |
| nl8048_init_seq[i].data); |
| if (ret < 0) |
| return ret; |
| } |
| |
| udelay(20); |
| |
| return nl8048_write(lcd, 2, 0x00); |
| } |
| |
| static int nl8048_disable(struct drm_panel *panel) |
| { |
| struct nl8048_panel *lcd = to_nl8048_device(panel); |
| |
| gpiod_set_value_cansleep(lcd->reset_gpio, 0); |
| |
| return 0; |
| } |
| |
| static int nl8048_enable(struct drm_panel *panel) |
| { |
| struct nl8048_panel *lcd = to_nl8048_device(panel); |
| |
| gpiod_set_value_cansleep(lcd->reset_gpio, 1); |
| |
| return 0; |
| } |
| |
| static const struct drm_display_mode nl8048_mode = { |
| /* NEC PIX Clock Ratings MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz */ |
| .clock = 23800, |
| .hdisplay = 800, |
| .hsync_start = 800 + 6, |
| .hsync_end = 800 + 6 + 1, |
| .htotal = 800 + 6 + 1 + 4, |
| .vdisplay = 480, |
| .vsync_start = 480 + 3, |
| .vsync_end = 480 + 3 + 1, |
| .vtotal = 480 + 3 + 1 + 4, |
| .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, |
| .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, |
| .width_mm = 89, |
| .height_mm = 53, |
| }; |
| |
| static int nl8048_get_modes(struct drm_panel *panel, |
| struct drm_connector *connector) |
| { |
| struct drm_display_mode *mode; |
| |
| mode = drm_mode_duplicate(connector->dev, &nl8048_mode); |
| if (!mode) |
| return -ENOMEM; |
| |
| drm_mode_set_name(mode); |
| drm_mode_probed_add(connector, mode); |
| |
| connector->display_info.width_mm = nl8048_mode.width_mm; |
| connector->display_info.height_mm = nl8048_mode.height_mm; |
| connector->display_info.bus_flags = DRM_BUS_FLAG_DE_HIGH |
| | DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE |
| | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE; |
| |
| return 1; |
| } |
| |
| static const struct drm_panel_funcs nl8048_funcs = { |
| .disable = nl8048_disable, |
| .enable = nl8048_enable, |
| .get_modes = nl8048_get_modes, |
| }; |
| |
| static int __maybe_unused nl8048_suspend(struct device *dev) |
| { |
| struct nl8048_panel *lcd = dev_get_drvdata(dev); |
| |
| nl8048_write(lcd, 2, 0x01); |
| msleep(40); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused nl8048_resume(struct device *dev) |
| { |
| struct nl8048_panel *lcd = dev_get_drvdata(dev); |
| |
| /* Reinitialize the panel. */ |
| spi_setup(lcd->spi); |
| nl8048_write(lcd, 2, 0x00); |
| nl8048_init(lcd); |
| |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(nl8048_pm_ops, nl8048_suspend, nl8048_resume); |
| |
| static int nl8048_probe(struct spi_device *spi) |
| { |
| struct nl8048_panel *lcd; |
| int ret; |
| |
| lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL); |
| if (!lcd) |
| return -ENOMEM; |
| |
| spi_set_drvdata(spi, lcd); |
| lcd->spi = spi; |
| |
| lcd->reset_gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW); |
| if (IS_ERR(lcd->reset_gpio)) { |
| dev_err(&spi->dev, "failed to parse reset gpio\n"); |
| return PTR_ERR(lcd->reset_gpio); |
| } |
| |
| spi->mode = SPI_MODE_0; |
| spi->bits_per_word = 32; |
| |
| ret = spi_setup(spi); |
| if (ret < 0) { |
| dev_err(&spi->dev, "failed to setup SPI: %d\n", ret); |
| return ret; |
| } |
| |
| ret = nl8048_init(lcd); |
| if (ret < 0) |
| return ret; |
| |
| drm_panel_init(&lcd->panel, &lcd->spi->dev, &nl8048_funcs, |
| DRM_MODE_CONNECTOR_DPI); |
| |
| drm_panel_add(&lcd->panel); |
| |
| return 0; |
| } |
| |
| static void nl8048_remove(struct spi_device *spi) |
| { |
| struct nl8048_panel *lcd = spi_get_drvdata(spi); |
| |
| drm_panel_remove(&lcd->panel); |
| drm_panel_disable(&lcd->panel); |
| drm_panel_unprepare(&lcd->panel); |
| } |
| |
| static const struct of_device_id nl8048_of_match[] = { |
| { .compatible = "nec,nl8048hl11", }, |
| { /* sentinel */ }, |
| }; |
| |
| MODULE_DEVICE_TABLE(of, nl8048_of_match); |
| |
| static const struct spi_device_id nl8048_ids[] = { |
| { "nl8048hl11", 0 }, |
| { /* sentinel */ } |
| }; |
| |
| MODULE_DEVICE_TABLE(spi, nl8048_ids); |
| |
| static struct spi_driver nl8048_driver = { |
| .probe = nl8048_probe, |
| .remove = nl8048_remove, |
| .id_table = nl8048_ids, |
| .driver = { |
| .name = "panel-nec-nl8048hl11", |
| .pm = &nl8048_pm_ops, |
| .of_match_table = nl8048_of_match, |
| }, |
| }; |
| |
| module_spi_driver(nl8048_driver); |
| |
| MODULE_AUTHOR("Erik Gilling <konkers@android.com>"); |
| MODULE_DESCRIPTION("NEC-NL8048HL11 Driver"); |
| MODULE_LICENSE("GPL"); |