blob: 4148009e0e0170caeec6d1b820ef13a09842d7bd [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
// Copyright (C) 2018 Intel Corporation
#include <linux/acpi.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#define DW9807_MAX_FOCUS_POS 1023
/*
* This sets the minimum granularity for the focus positions.
* A value of 1 gives maximum accuracy for a desired focus position.
*/
#define DW9807_FOCUS_STEPS 1
/*
* This acts as the minimum granularity of lens movement.
* Keep this value power of 2, so the control steps can be
* uniformly adjusted for gradual lens movement, with desired
* number of control steps.
*/
#define DW9807_CTRL_STEPS 16
#define DW9807_CTRL_DELAY_US 1000
#define DW9807_CTL_ADDR 0x02
/*
* DW9807 separates two registers to control the VCM position.
* One for MSB value, another is LSB value.
*/
#define DW9807_MSB_ADDR 0x03
#define DW9807_LSB_ADDR 0x04
#define DW9807_STATUS_ADDR 0x05
#define DW9807_MODE_ADDR 0x06
#define DW9807_RESONANCE_ADDR 0x07
#define MAX_RETRY 10
struct dw9807_device {
struct v4l2_ctrl_handler ctrls_vcm;
struct v4l2_subdev sd;
u16 current_val;
};
static inline struct dw9807_device *sd_to_dw9807_vcm(
struct v4l2_subdev *subdev)
{
return container_of(subdev, struct dw9807_device, sd);
}
static int dw9807_i2c_check(struct i2c_client *client)
{
const char status_addr = DW9807_STATUS_ADDR;
char status_result;
int ret;
ret = i2c_master_send(client, &status_addr, sizeof(status_addr));
if (ret < 0) {
dev_err(&client->dev, "I2C write STATUS address fail ret = %d\n",
ret);
return ret;
}
ret = i2c_master_recv(client, &status_result, sizeof(status_result));
if (ret < 0) {
dev_err(&client->dev, "I2C read STATUS value fail ret = %d\n",
ret);
return ret;
}
return status_result;
}
static int dw9807_set_dac(struct i2c_client *client, u16 data)
{
const char tx_data[3] = {
DW9807_MSB_ADDR, ((data >> 8) & 0x03), (data & 0xff)
};
int val, ret;
/*
* According to the datasheet, need to check the bus status before we
* write VCM position. This ensure that we really write the value
* into the register
*/
ret = readx_poll_timeout(dw9807_i2c_check, client, val, val <= 0,
DW9807_CTRL_DELAY_US, MAX_RETRY * DW9807_CTRL_DELAY_US);
if (ret || val < 0) {
if (ret) {
dev_warn(&client->dev,
"Cannot do the write operation because VCM is busy\n");
}
return ret ? -EBUSY : val;
}
/* Write VCM position to registers */
ret = i2c_master_send(client, tx_data, sizeof(tx_data));
if (ret < 0) {
dev_err(&client->dev,
"I2C write MSB fail ret=%d\n", ret);
return ret;
}
return 0;
}
static int dw9807_set_ctrl(struct v4l2_ctrl *ctrl)
{
struct dw9807_device *dev_vcm = container_of(ctrl->handler,
struct dw9807_device, ctrls_vcm);
if (ctrl->id == V4L2_CID_FOCUS_ABSOLUTE) {
struct i2c_client *client = v4l2_get_subdevdata(&dev_vcm->sd);
dev_vcm->current_val = ctrl->val;
return dw9807_set_dac(client, ctrl->val);
}
return -EINVAL;
}
static const struct v4l2_ctrl_ops dw9807_vcm_ctrl_ops = {
.s_ctrl = dw9807_set_ctrl,
};
static int dw9807_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
{
return pm_runtime_resume_and_get(sd->dev);
}
static int dw9807_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
{
pm_runtime_put(sd->dev);
return 0;
}
static const struct v4l2_subdev_internal_ops dw9807_int_ops = {
.open = dw9807_open,
.close = dw9807_close,
};
static const struct v4l2_subdev_ops dw9807_ops = { };
static void dw9807_subdev_cleanup(struct dw9807_device *dw9807_dev)
{
v4l2_async_unregister_subdev(&dw9807_dev->sd);
v4l2_ctrl_handler_free(&dw9807_dev->ctrls_vcm);
media_entity_cleanup(&dw9807_dev->sd.entity);
}
static int dw9807_init_controls(struct dw9807_device *dev_vcm)
{
struct v4l2_ctrl_handler *hdl = &dev_vcm->ctrls_vcm;
const struct v4l2_ctrl_ops *ops = &dw9807_vcm_ctrl_ops;
struct i2c_client *client = v4l2_get_subdevdata(&dev_vcm->sd);
v4l2_ctrl_handler_init(hdl, 1);
v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FOCUS_ABSOLUTE,
0, DW9807_MAX_FOCUS_POS, DW9807_FOCUS_STEPS, 0);
dev_vcm->sd.ctrl_handler = hdl;
if (hdl->error) {
dev_err(&client->dev, "%s fail error: 0x%x\n",
__func__, hdl->error);
return hdl->error;
}
return 0;
}
static int dw9807_probe(struct i2c_client *client)
{
struct dw9807_device *dw9807_dev;
int rval;
dw9807_dev = devm_kzalloc(&client->dev, sizeof(*dw9807_dev),
GFP_KERNEL);
if (dw9807_dev == NULL)
return -ENOMEM;
v4l2_i2c_subdev_init(&dw9807_dev->sd, client, &dw9807_ops);
dw9807_dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
dw9807_dev->sd.internal_ops = &dw9807_int_ops;
rval = dw9807_init_controls(dw9807_dev);
if (rval)
goto err_cleanup;
rval = media_entity_pads_init(&dw9807_dev->sd.entity, 0, NULL);
if (rval < 0)
goto err_cleanup;
dw9807_dev->sd.entity.function = MEDIA_ENT_F_LENS;
rval = v4l2_async_register_subdev(&dw9807_dev->sd);
if (rval < 0)
goto err_cleanup;
pm_runtime_set_active(&client->dev);
pm_runtime_enable(&client->dev);
pm_runtime_idle(&client->dev);
return 0;
err_cleanup:
v4l2_ctrl_handler_free(&dw9807_dev->ctrls_vcm);
media_entity_cleanup(&dw9807_dev->sd.entity);
return rval;
}
static void dw9807_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct dw9807_device *dw9807_dev = sd_to_dw9807_vcm(sd);
pm_runtime_disable(&client->dev);
dw9807_subdev_cleanup(dw9807_dev);
}
/*
* This function sets the vcm position, so it consumes least current
* The lens position is gradually moved in units of DW9807_CTRL_STEPS,
* to make the movements smoothly.
*/
static int __maybe_unused dw9807_vcm_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct dw9807_device *dw9807_dev = sd_to_dw9807_vcm(sd);
const char tx_data[2] = { DW9807_CTL_ADDR, 0x01 };
int ret, val;
for (val = dw9807_dev->current_val & ~(DW9807_CTRL_STEPS - 1);
val >= 0; val -= DW9807_CTRL_STEPS) {
ret = dw9807_set_dac(client, val);
if (ret)
dev_err_once(dev, "%s I2C failure: %d", __func__, ret);
usleep_range(DW9807_CTRL_DELAY_US, DW9807_CTRL_DELAY_US + 10);
}
/* Power down */
ret = i2c_master_send(client, tx_data, sizeof(tx_data));
if (ret < 0) {
dev_err(&client->dev, "I2C write CTL fail ret = %d\n", ret);
return ret;
}
return 0;
}
/*
* This function sets the vcm position to the value set by the user
* through v4l2_ctrl_ops s_ctrl handler
* The lens position is gradually moved in units of DW9807_CTRL_STEPS,
* to make the movements smoothly.
*/
static int __maybe_unused dw9807_vcm_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct dw9807_device *dw9807_dev = sd_to_dw9807_vcm(sd);
const char tx_data[2] = { DW9807_CTL_ADDR, 0x00 };
int ret, val;
/* Power on */
ret = i2c_master_send(client, tx_data, sizeof(tx_data));
if (ret < 0) {
dev_err(&client->dev, "I2C write CTL fail ret = %d\n", ret);
return ret;
}
for (val = dw9807_dev->current_val % DW9807_CTRL_STEPS;
val < dw9807_dev->current_val + DW9807_CTRL_STEPS - 1;
val += DW9807_CTRL_STEPS) {
ret = dw9807_set_dac(client, val);
if (ret)
dev_err_ratelimited(dev, "%s I2C failure: %d",
__func__, ret);
usleep_range(DW9807_CTRL_DELAY_US, DW9807_CTRL_DELAY_US + 10);
}
return 0;
}
static const struct of_device_id dw9807_of_table[] = {
{ .compatible = "dongwoon,dw9807-vcm" },
/* Compatibility for older firmware, NEVER USE THIS IN FIRMWARE! */
{ .compatible = "dongwoon,dw9807" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, dw9807_of_table);
static const struct dev_pm_ops dw9807_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(dw9807_vcm_suspend, dw9807_vcm_resume)
SET_RUNTIME_PM_OPS(dw9807_vcm_suspend, dw9807_vcm_resume, NULL)
};
static struct i2c_driver dw9807_i2c_driver = {
.driver = {
.name = "dw9807",
.pm = &dw9807_pm_ops,
.of_match_table = dw9807_of_table,
},
.probe = dw9807_probe,
.remove = dw9807_remove,
};
module_i2c_driver(dw9807_i2c_driver);
MODULE_AUTHOR("Chiang, Alan");
MODULE_DESCRIPTION("DW9807 VCM driver");
MODULE_LICENSE("GPL v2");