| // SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) |
| // Copyright(c) 2015-22 Intel Corporation. |
| |
| /* |
| * Soundwire Intel Manager Driver |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/debugfs.h> |
| #include <linux/delay.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/auxiliary_bus.h> |
| #include <sound/pcm_params.h> |
| #include <linux/pm_runtime.h> |
| #include <sound/soc.h> |
| #include <linux/soundwire/sdw_registers.h> |
| #include <linux/soundwire/sdw.h> |
| #include <linux/soundwire/sdw_intel.h> |
| #include "cadence_master.h" |
| #include "bus.h" |
| #include "intel.h" |
| #include "intel_auxdevice.h" |
| |
| #define INTEL_MASTER_SUSPEND_DELAY_MS 3000 |
| |
| /* |
| * debug/config flags for the Intel SoundWire Master. |
| * |
| * Since we may have multiple masters active, we can have up to 8 |
| * flags reused in each byte, with master0 using the ls-byte, etc. |
| */ |
| |
| #define SDW_INTEL_MASTER_DISABLE_PM_RUNTIME BIT(0) |
| #define SDW_INTEL_MASTER_DISABLE_CLOCK_STOP BIT(1) |
| #define SDW_INTEL_MASTER_DISABLE_PM_RUNTIME_IDLE BIT(2) |
| #define SDW_INTEL_MASTER_DISABLE_MULTI_LINK BIT(3) |
| |
| static int md_flags; |
| module_param_named(sdw_md_flags, md_flags, int, 0444); |
| MODULE_PARM_DESC(sdw_md_flags, "SoundWire Intel Master device flags (0x0 all off)"); |
| |
| struct wake_capable_part { |
| const u16 mfg_id; |
| const u16 part_id; |
| }; |
| |
| static struct wake_capable_part wake_capable_list[] = { |
| {0x025d, 0x5682}, |
| {0x025d, 0x700}, |
| {0x025d, 0x711}, |
| {0x025d, 0x1712}, |
| {0x025d, 0x1713}, |
| {0x025d, 0x1716}, |
| {0x025d, 0x1717}, |
| {0x025d, 0x712}, |
| {0x025d, 0x713}, |
| {0x025d, 0x714}, |
| {0x025d, 0x715}, |
| {0x025d, 0x716}, |
| {0x025d, 0x717}, |
| {0x025d, 0x722}, |
| }; |
| |
| static bool is_wake_capable(struct sdw_slave *slave) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(wake_capable_list); i++) |
| if (slave->id.part_id == wake_capable_list[i].part_id && |
| slave->id.mfg_id == wake_capable_list[i].mfg_id) |
| return true; |
| return false; |
| } |
| |
| static int generic_pre_bank_switch(struct sdw_bus *bus) |
| { |
| struct sdw_cdns *cdns = bus_to_cdns(bus); |
| struct sdw_intel *sdw = cdns_to_intel(cdns); |
| |
| return sdw->link_res->hw_ops->pre_bank_switch(sdw); |
| } |
| |
| static int generic_post_bank_switch(struct sdw_bus *bus) |
| { |
| struct sdw_cdns *cdns = bus_to_cdns(bus); |
| struct sdw_intel *sdw = cdns_to_intel(cdns); |
| |
| return sdw->link_res->hw_ops->post_bank_switch(sdw); |
| } |
| |
| static void generic_new_peripheral_assigned(struct sdw_bus *bus, |
| struct sdw_slave *slave, |
| int dev_num) |
| { |
| struct sdw_cdns *cdns = bus_to_cdns(bus); |
| struct sdw_intel *sdw = cdns_to_intel(cdns); |
| int dev_num_min; |
| int dev_num_max; |
| bool wake_capable = slave->prop.wake_capable || is_wake_capable(slave); |
| |
| if (wake_capable) { |
| dev_num_min = SDW_INTEL_DEV_NUM_IDA_MIN; |
| dev_num_max = SDW_MAX_DEVICES; |
| } else { |
| dev_num_min = 1; |
| dev_num_max = SDW_INTEL_DEV_NUM_IDA_MIN - 1; |
| } |
| |
| /* paranoia check, this should never happen */ |
| if (dev_num < dev_num_min || dev_num > dev_num_max) { |
| dev_err(bus->dev, "%s: invalid dev_num %d, wake supported %d\n", |
| __func__, dev_num, slave->prop.wake_capable); |
| return; |
| } |
| |
| if (sdw->link_res->hw_ops->program_sdi && wake_capable) |
| sdw->link_res->hw_ops->program_sdi(sdw, dev_num); |
| } |
| |
| static int sdw_master_read_intel_prop(struct sdw_bus *bus) |
| { |
| struct sdw_master_prop *prop = &bus->prop; |
| struct sdw_intel_prop *intel_prop; |
| struct fwnode_handle *link; |
| char name[32]; |
| u32 quirk_mask; |
| |
| /* Find master handle */ |
| snprintf(name, sizeof(name), |
| "mipi-sdw-link-%d-subproperties", bus->link_id); |
| |
| link = device_get_named_child_node(bus->dev, name); |
| if (!link) { |
| dev_err(bus->dev, "Master node %s not found\n", name); |
| return -EIO; |
| } |
| |
| fwnode_property_read_u32(link, |
| "intel-sdw-ip-clock", |
| &prop->mclk_freq); |
| |
| /* the values reported by BIOS are the 2x clock, not the bus clock */ |
| prop->mclk_freq /= 2; |
| |
| fwnode_property_read_u32(link, |
| "intel-quirk-mask", |
| &quirk_mask); |
| |
| if (quirk_mask & SDW_INTEL_QUIRK_MASK_BUS_DISABLE) |
| prop->hw_disabled = true; |
| |
| prop->quirks = SDW_MASTER_QUIRKS_CLEAR_INITIAL_CLASH | |
| SDW_MASTER_QUIRKS_CLEAR_INITIAL_PARITY; |
| |
| intel_prop = devm_kzalloc(bus->dev, sizeof(*intel_prop), GFP_KERNEL); |
| if (!intel_prop) { |
| fwnode_handle_put(link); |
| return -ENOMEM; |
| } |
| |
| /* initialize with hardware defaults, in case the properties are not found */ |
| intel_prop->doaise = 0x1; |
| intel_prop->doais = 0x3; |
| intel_prop->dodse = 0x0; |
| intel_prop->dods = 0x1; |
| |
| fwnode_property_read_u16(link, |
| "intel-sdw-doaise", |
| &intel_prop->doaise); |
| fwnode_property_read_u16(link, |
| "intel-sdw-doais", |
| &intel_prop->doais); |
| fwnode_property_read_u16(link, |
| "intel-sdw-dodse", |
| &intel_prop->dodse); |
| fwnode_property_read_u16(link, |
| "intel-sdw-dods", |
| &intel_prop->dods); |
| bus->vendor_specific_prop = intel_prop; |
| |
| dev_dbg(bus->dev, "doaise %#x doais %#x dodse %#x dods %#x\n", |
| intel_prop->doaise, |
| intel_prop->doais, |
| intel_prop->dodse, |
| intel_prop->dods); |
| |
| fwnode_handle_put(link); |
| |
| return 0; |
| } |
| |
| static int intel_prop_read(struct sdw_bus *bus) |
| { |
| /* Initialize with default handler to read all DisCo properties */ |
| sdw_master_read_prop(bus); |
| |
| /* read Intel-specific properties */ |
| sdw_master_read_intel_prop(bus); |
| |
| return 0; |
| } |
| |
| static DEFINE_IDA(intel_peripheral_ida); |
| |
| static int intel_get_device_num_ida(struct sdw_bus *bus, struct sdw_slave *slave) |
| { |
| int bit; |
| |
| if (slave->prop.wake_capable || is_wake_capable(slave)) |
| return ida_alloc_range(&intel_peripheral_ida, |
| SDW_INTEL_DEV_NUM_IDA_MIN, SDW_MAX_DEVICES, |
| GFP_KERNEL); |
| |
| bit = find_first_zero_bit(slave->bus->assigned, SDW_MAX_DEVICES); |
| if (bit == SDW_MAX_DEVICES) |
| return -ENODEV; |
| |
| return bit; |
| } |
| |
| static void intel_put_device_num_ida(struct sdw_bus *bus, struct sdw_slave *slave) |
| { |
| if (slave->prop.wake_capable || is_wake_capable(slave)) |
| ida_free(&intel_peripheral_ida, slave->dev_num); |
| } |
| |
| static struct sdw_master_ops sdw_intel_ops = { |
| .read_prop = intel_prop_read, |
| .override_adr = sdw_dmi_override_adr, |
| .xfer_msg = cdns_xfer_msg, |
| .xfer_msg_defer = cdns_xfer_msg_defer, |
| .set_bus_conf = cdns_bus_conf, |
| .pre_bank_switch = generic_pre_bank_switch, |
| .post_bank_switch = generic_post_bank_switch, |
| .read_ping_status = cdns_read_ping_status, |
| .get_device_num = intel_get_device_num_ida, |
| .put_device_num = intel_put_device_num_ida, |
| .new_peripheral_assigned = generic_new_peripheral_assigned, |
| }; |
| |
| /* |
| * probe and init (aux_dev_id argument is required by function prototype but not used) |
| */ |
| static int intel_link_probe(struct auxiliary_device *auxdev, |
| const struct auxiliary_device_id *aux_dev_id) |
| |
| { |
| struct device *dev = &auxdev->dev; |
| struct sdw_intel_link_dev *ldev = auxiliary_dev_to_sdw_intel_link_dev(auxdev); |
| struct sdw_intel *sdw; |
| struct sdw_cdns *cdns; |
| struct sdw_bus *bus; |
| int ret; |
| |
| sdw = devm_kzalloc(dev, sizeof(*sdw), GFP_KERNEL); |
| if (!sdw) |
| return -ENOMEM; |
| |
| cdns = &sdw->cdns; |
| bus = &cdns->bus; |
| |
| sdw->instance = auxdev->id; |
| sdw->link_res = &ldev->link_res; |
| cdns->dev = dev; |
| cdns->registers = sdw->link_res->registers; |
| cdns->ip_offset = sdw->link_res->ip_offset; |
| cdns->instance = sdw->instance; |
| cdns->msg_count = 0; |
| |
| /* single controller for all SoundWire links */ |
| bus->controller_id = 0; |
| |
| bus->link_id = auxdev->id; |
| bus->clk_stop_timeout = 1; |
| |
| sdw_cdns_probe(cdns); |
| |
| /* Set ops */ |
| bus->ops = &sdw_intel_ops; |
| |
| /* set driver data, accessed by snd_soc_dai_get_drvdata() */ |
| auxiliary_set_drvdata(auxdev, cdns); |
| |
| /* use generic bandwidth allocation algorithm */ |
| sdw->cdns.bus.compute_params = sdw_compute_params; |
| |
| /* avoid resuming from pm_runtime suspend if it's not required */ |
| dev_pm_set_driver_flags(dev, DPM_FLAG_SMART_SUSPEND); |
| |
| ret = sdw_bus_master_add(bus, dev, dev->fwnode); |
| if (ret) { |
| dev_err(dev, "sdw_bus_master_add fail: %d\n", ret); |
| return ret; |
| } |
| |
| if (bus->prop.hw_disabled) |
| dev_info(dev, |
| "SoundWire master %d is disabled, will be ignored\n", |
| bus->link_id); |
| /* |
| * Ignore BIOS err_threshold, it's a really bad idea when dealing |
| * with multiple hardware synchronized links |
| */ |
| bus->prop.err_threshold = 0; |
| |
| return 0; |
| } |
| |
| int intel_link_startup(struct auxiliary_device *auxdev) |
| { |
| struct device *dev = &auxdev->dev; |
| struct sdw_cdns *cdns = auxiliary_get_drvdata(auxdev); |
| struct sdw_intel *sdw = cdns_to_intel(cdns); |
| struct sdw_bus *bus = &cdns->bus; |
| int link_flags; |
| bool multi_link; |
| u32 clock_stop_quirks; |
| int ret; |
| |
| if (bus->prop.hw_disabled) { |
| dev_info(dev, |
| "SoundWire master %d is disabled, ignoring\n", |
| sdw->instance); |
| return 0; |
| } |
| |
| link_flags = md_flags >> (bus->link_id * 8); |
| multi_link = !(link_flags & SDW_INTEL_MASTER_DISABLE_MULTI_LINK); |
| if (!multi_link) { |
| dev_dbg(dev, "Multi-link is disabled\n"); |
| } else { |
| /* |
| * hardware-based synchronization is required regardless |
| * of the number of segments used by a stream: SSP-based |
| * synchronization is gated by gsync when the multi-master |
| * mode is set. |
| */ |
| bus->hw_sync_min_links = 1; |
| } |
| bus->multi_link = multi_link; |
| |
| /* Initialize shim, controller */ |
| ret = sdw_intel_link_power_up(sdw); |
| if (ret) |
| goto err_init; |
| |
| /* Register DAIs */ |
| ret = sdw_intel_register_dai(sdw); |
| if (ret) { |
| dev_err(dev, "DAI registration failed: %d\n", ret); |
| goto err_power_up; |
| } |
| |
| sdw_intel_debugfs_init(sdw); |
| |
| /* Enable runtime PM */ |
| if (!(link_flags & SDW_INTEL_MASTER_DISABLE_PM_RUNTIME)) { |
| pm_runtime_set_autosuspend_delay(dev, |
| INTEL_MASTER_SUSPEND_DELAY_MS); |
| pm_runtime_use_autosuspend(dev); |
| pm_runtime_mark_last_busy(dev); |
| |
| pm_runtime_set_active(dev); |
| pm_runtime_enable(dev); |
| |
| pm_runtime_resume(bus->dev); |
| } |
| |
| /* start bus */ |
| ret = sdw_intel_start_bus(sdw); |
| if (ret) { |
| dev_err(dev, "bus start failed: %d\n", ret); |
| goto err_pm_runtime; |
| } |
| |
| clock_stop_quirks = sdw->link_res->clock_stop_quirks; |
| if (clock_stop_quirks & SDW_INTEL_CLK_STOP_NOT_ALLOWED) { |
| /* |
| * To keep the clock running we need to prevent |
| * pm_runtime suspend from happening by increasing the |
| * reference count. |
| * This quirk is specified by the parent PCI device in |
| * case of specific latency requirements. It will have |
| * no effect if pm_runtime is disabled by the user via |
| * a module parameter for testing purposes. |
| */ |
| pm_runtime_get_noresume(dev); |
| } |
| |
| /* |
| * The runtime PM status of Slave devices is "Unsupported" |
| * until they report as ATTACHED. If they don't, e.g. because |
| * there are no Slave devices populated or if the power-on is |
| * delayed or dependent on a power switch, the Master will |
| * remain active and prevent its parent from suspending. |
| * |
| * Conditionally force the pm_runtime core to re-evaluate the |
| * Master status in the absence of any Slave activity. A quirk |
| * is provided to e.g. deal with Slaves that may be powered on |
| * with a delay. A more complete solution would require the |
| * definition of Master properties. |
| */ |
| if (!(link_flags & SDW_INTEL_MASTER_DISABLE_PM_RUNTIME_IDLE)) { |
| pm_runtime_mark_last_busy(bus->dev); |
| pm_runtime_mark_last_busy(dev); |
| pm_runtime_idle(dev); |
| } |
| |
| sdw->startup_done = true; |
| return 0; |
| |
| err_pm_runtime: |
| if (!(link_flags & SDW_INTEL_MASTER_DISABLE_PM_RUNTIME)) |
| pm_runtime_disable(dev); |
| err_power_up: |
| sdw_intel_link_power_down(sdw); |
| err_init: |
| return ret; |
| } |
| |
| static void intel_link_remove(struct auxiliary_device *auxdev) |
| { |
| struct sdw_cdns *cdns = auxiliary_get_drvdata(auxdev); |
| struct sdw_intel *sdw = cdns_to_intel(cdns); |
| struct sdw_bus *bus = &cdns->bus; |
| |
| /* |
| * Since pm_runtime is already disabled, we don't decrease |
| * the refcount when the clock_stop_quirk is |
| * SDW_INTEL_CLK_STOP_NOT_ALLOWED |
| */ |
| if (!bus->prop.hw_disabled) { |
| sdw_intel_debugfs_exit(sdw); |
| sdw_cdns_enable_interrupt(cdns, false); |
| } |
| sdw_bus_master_delete(bus); |
| } |
| |
| int intel_link_process_wakeen_event(struct auxiliary_device *auxdev) |
| { |
| struct device *dev = &auxdev->dev; |
| struct sdw_intel *sdw; |
| struct sdw_bus *bus; |
| |
| sdw = auxiliary_get_drvdata(auxdev); |
| bus = &sdw->cdns.bus; |
| |
| if (bus->prop.hw_disabled || !sdw->startup_done) { |
| dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n", |
| bus->link_id); |
| return 0; |
| } |
| |
| if (!sdw_intel_shim_check_wake(sdw)) |
| return 0; |
| |
| /* disable WAKEEN interrupt ASAP to prevent interrupt flood */ |
| sdw_intel_shim_wake(sdw, false); |
| |
| /* |
| * resume the Master, which will generate a bus reset and result in |
| * Slaves re-attaching and be re-enumerated. The SoundWire physical |
| * device which generated the wake will trigger an interrupt, which |
| * will in turn cause the corresponding Linux Slave device to be |
| * resumed and the Slave codec driver to check the status. |
| */ |
| pm_request_resume(dev); |
| |
| return 0; |
| } |
| |
| /* |
| * PM calls |
| */ |
| |
| int intel_resume_child_device(struct device *dev, void *data) |
| { |
| int ret; |
| struct sdw_slave *slave = dev_to_sdw_dev(dev); |
| |
| if (!slave->probed) { |
| dev_dbg(dev, "skipping device, no probed driver\n"); |
| return 0; |
| } |
| if (!slave->dev_num_sticky) { |
| dev_dbg(dev, "skipping device, never detected on bus\n"); |
| return 0; |
| } |
| |
| ret = pm_runtime_resume(dev); |
| if (ret < 0) { |
| dev_err(dev, "%s: pm_runtime_resume failed: %d\n", __func__, ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int __maybe_unused intel_pm_prepare(struct device *dev) |
| { |
| struct sdw_cdns *cdns = dev_get_drvdata(dev); |
| struct sdw_intel *sdw = cdns_to_intel(cdns); |
| struct sdw_bus *bus = &cdns->bus; |
| u32 clock_stop_quirks; |
| int ret; |
| |
| if (bus->prop.hw_disabled || !sdw->startup_done) { |
| dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n", |
| bus->link_id); |
| return 0; |
| } |
| |
| clock_stop_quirks = sdw->link_res->clock_stop_quirks; |
| |
| if (pm_runtime_suspended(dev) && |
| pm_runtime_suspended(dev->parent) && |
| ((clock_stop_quirks & SDW_INTEL_CLK_STOP_BUS_RESET) || |
| !clock_stop_quirks)) { |
| /* |
| * if we've enabled clock stop, and the parent is suspended, the SHIM registers |
| * are not accessible and the shim wake cannot be disabled. |
| * The only solution is to resume the entire bus to full power |
| */ |
| |
| /* |
| * If any operation in this block fails, we keep going since we don't want |
| * to prevent system suspend from happening and errors should be recoverable |
| * on resume. |
| */ |
| |
| /* |
| * first resume the device for this link. This will also by construction |
| * resume the PCI parent device. |
| */ |
| ret = pm_runtime_resume(dev); |
| if (ret < 0) { |
| dev_err(dev, "%s: pm_runtime_resume failed: %d\n", __func__, ret); |
| return 0; |
| } |
| |
| /* |
| * Continue resuming the entire bus (parent + child devices) to exit |
| * the clock stop mode. If there are no devices connected on this link |
| * this is a no-op. |
| * The resume to full power could have been implemented with a .prepare |
| * step in SoundWire codec drivers. This would however require a lot |
| * of code to handle an Intel-specific corner case. It is simpler in |
| * practice to add a loop at the link level. |
| */ |
| ret = device_for_each_child(bus->dev, NULL, intel_resume_child_device); |
| |
| if (ret < 0) |
| dev_err(dev, "%s: intel_resume_child_device failed: %d\n", __func__, ret); |
| } |
| |
| return 0; |
| } |
| |
| static int __maybe_unused intel_suspend(struct device *dev) |
| { |
| struct sdw_cdns *cdns = dev_get_drvdata(dev); |
| struct sdw_intel *sdw = cdns_to_intel(cdns); |
| struct sdw_bus *bus = &cdns->bus; |
| u32 clock_stop_quirks; |
| int ret; |
| |
| if (bus->prop.hw_disabled || !sdw->startup_done) { |
| dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n", |
| bus->link_id); |
| return 0; |
| } |
| |
| if (pm_runtime_suspended(dev)) { |
| dev_dbg(dev, "pm_runtime status: suspended\n"); |
| |
| clock_stop_quirks = sdw->link_res->clock_stop_quirks; |
| |
| if ((clock_stop_quirks & SDW_INTEL_CLK_STOP_BUS_RESET) || |
| !clock_stop_quirks) { |
| |
| if (pm_runtime_suspended(dev->parent)) { |
| /* |
| * paranoia check: this should not happen with the .prepare |
| * resume to full power |
| */ |
| dev_err(dev, "%s: invalid config: parent is suspended\n", __func__); |
| } else { |
| sdw_intel_shim_wake(sdw, false); |
| } |
| } |
| |
| return 0; |
| } |
| |
| ret = sdw_intel_stop_bus(sdw, false); |
| if (ret < 0) { |
| dev_err(dev, "%s: cannot stop bus: %d\n", __func__, ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int __maybe_unused intel_suspend_runtime(struct device *dev) |
| { |
| struct sdw_cdns *cdns = dev_get_drvdata(dev); |
| struct sdw_intel *sdw = cdns_to_intel(cdns); |
| struct sdw_bus *bus = &cdns->bus; |
| u32 clock_stop_quirks; |
| int ret; |
| |
| if (bus->prop.hw_disabled || !sdw->startup_done) { |
| dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n", |
| bus->link_id); |
| return 0; |
| } |
| |
| clock_stop_quirks = sdw->link_res->clock_stop_quirks; |
| |
| if (clock_stop_quirks & SDW_INTEL_CLK_STOP_TEARDOWN) { |
| ret = sdw_intel_stop_bus(sdw, false); |
| if (ret < 0) { |
| dev_err(dev, "%s: cannot stop bus during teardown: %d\n", |
| __func__, ret); |
| return ret; |
| } |
| } else if (clock_stop_quirks & SDW_INTEL_CLK_STOP_BUS_RESET || !clock_stop_quirks) { |
| ret = sdw_intel_stop_bus(sdw, true); |
| if (ret < 0) { |
| dev_err(dev, "%s: cannot stop bus during clock_stop: %d\n", |
| __func__, ret); |
| return ret; |
| } |
| } else { |
| dev_err(dev, "%s clock_stop_quirks %x unsupported\n", |
| __func__, clock_stop_quirks); |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int __maybe_unused intel_resume(struct device *dev) |
| { |
| struct sdw_cdns *cdns = dev_get_drvdata(dev); |
| struct sdw_intel *sdw = cdns_to_intel(cdns); |
| struct sdw_bus *bus = &cdns->bus; |
| int link_flags; |
| int ret; |
| |
| if (bus->prop.hw_disabled || !sdw->startup_done) { |
| dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n", |
| bus->link_id); |
| return 0; |
| } |
| |
| if (pm_runtime_suspended(dev)) { |
| dev_dbg(dev, "pm_runtime status was suspended, forcing active\n"); |
| |
| /* follow required sequence from runtime_pm.rst */ |
| pm_runtime_disable(dev); |
| pm_runtime_set_active(dev); |
| pm_runtime_mark_last_busy(dev); |
| pm_runtime_enable(dev); |
| |
| pm_runtime_resume(bus->dev); |
| |
| link_flags = md_flags >> (bus->link_id * 8); |
| |
| if (!(link_flags & SDW_INTEL_MASTER_DISABLE_PM_RUNTIME_IDLE)) |
| pm_runtime_idle(dev); |
| } |
| |
| ret = sdw_intel_link_power_up(sdw); |
| if (ret) { |
| dev_err(dev, "%s failed: %d\n", __func__, ret); |
| return ret; |
| } |
| |
| /* |
| * make sure all Slaves are tagged as UNATTACHED and provide |
| * reason for reinitialization |
| */ |
| sdw_clear_slave_status(bus, SDW_UNATTACH_REQUEST_MASTER_RESET); |
| |
| ret = sdw_intel_start_bus(sdw); |
| if (ret < 0) { |
| dev_err(dev, "cannot start bus during resume\n"); |
| sdw_intel_link_power_down(sdw); |
| return ret; |
| } |
| |
| /* |
| * after system resume, the pm_runtime suspend() may kick in |
| * during the enumeration, before any children device force the |
| * master device to remain active. Using pm_runtime_get() |
| * routines is not really possible, since it'd prevent the |
| * master from suspending. |
| * A reasonable compromise is to update the pm_runtime |
| * counters and delay the pm_runtime suspend by several |
| * seconds, by when all enumeration should be complete. |
| */ |
| pm_runtime_mark_last_busy(bus->dev); |
| pm_runtime_mark_last_busy(dev); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused intel_resume_runtime(struct device *dev) |
| { |
| struct sdw_cdns *cdns = dev_get_drvdata(dev); |
| struct sdw_intel *sdw = cdns_to_intel(cdns); |
| struct sdw_bus *bus = &cdns->bus; |
| u32 clock_stop_quirks; |
| int ret; |
| |
| if (bus->prop.hw_disabled || !sdw->startup_done) { |
| dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n", |
| bus->link_id); |
| return 0; |
| } |
| |
| /* unconditionally disable WAKEEN interrupt */ |
| sdw_intel_shim_wake(sdw, false); |
| |
| clock_stop_quirks = sdw->link_res->clock_stop_quirks; |
| |
| if (clock_stop_quirks & SDW_INTEL_CLK_STOP_TEARDOWN) { |
| ret = sdw_intel_link_power_up(sdw); |
| if (ret) { |
| dev_err(dev, "%s: power_up failed after teardown: %d\n", __func__, ret); |
| return ret; |
| } |
| |
| /* |
| * make sure all Slaves are tagged as UNATTACHED and provide |
| * reason for reinitialization |
| */ |
| sdw_clear_slave_status(bus, SDW_UNATTACH_REQUEST_MASTER_RESET); |
| |
| ret = sdw_intel_start_bus(sdw); |
| if (ret < 0) { |
| dev_err(dev, "%s: cannot start bus after teardown: %d\n", __func__, ret); |
| sdw_intel_link_power_down(sdw); |
| return ret; |
| } |
| |
| } else if (clock_stop_quirks & SDW_INTEL_CLK_STOP_BUS_RESET) { |
| ret = sdw_intel_link_power_up(sdw); |
| if (ret) { |
| dev_err(dev, "%s: power_up failed after bus reset: %d\n", __func__, ret); |
| return ret; |
| } |
| |
| ret = sdw_intel_start_bus_after_reset(sdw); |
| if (ret < 0) { |
| dev_err(dev, "%s: cannot start bus after reset: %d\n", __func__, ret); |
| sdw_intel_link_power_down(sdw); |
| return ret; |
| } |
| } else if (!clock_stop_quirks) { |
| |
| sdw_intel_check_clock_stop(sdw); |
| |
| ret = sdw_intel_link_power_up(sdw); |
| if (ret) { |
| dev_err(dev, "%s: power_up failed: %d\n", __func__, ret); |
| return ret; |
| } |
| |
| ret = sdw_intel_start_bus_after_clock_stop(sdw); |
| if (ret < 0) { |
| dev_err(dev, "%s: cannot start bus after clock stop: %d\n", __func__, ret); |
| sdw_intel_link_power_down(sdw); |
| return ret; |
| } |
| } else { |
| dev_err(dev, "%s: clock_stop_quirks %x unsupported\n", |
| __func__, clock_stop_quirks); |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static const struct dev_pm_ops intel_pm = { |
| .prepare = intel_pm_prepare, |
| SET_SYSTEM_SLEEP_PM_OPS(intel_suspend, intel_resume) |
| SET_RUNTIME_PM_OPS(intel_suspend_runtime, intel_resume_runtime, NULL) |
| }; |
| |
| static const struct auxiliary_device_id intel_link_id_table[] = { |
| { .name = "soundwire_intel.link" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(auxiliary, intel_link_id_table); |
| |
| static struct auxiliary_driver sdw_intel_drv = { |
| .probe = intel_link_probe, |
| .remove = intel_link_remove, |
| .driver = { |
| /* auxiliary_driver_register() sets .name to be the modname */ |
| .pm = &intel_pm, |
| }, |
| .id_table = intel_link_id_table |
| }; |
| module_auxiliary_driver(sdw_intel_drv); |
| |
| MODULE_LICENSE("Dual BSD/GPL"); |
| MODULE_DESCRIPTION("Intel Soundwire Link Driver"); |