| /**************************************************************************** |
| * Driver for Solarflare network controllers and boards |
| * Copyright 2005-2006 Fen Systems Ltd. |
| * Copyright 2005-2013 Solarflare Communications Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation, incorporated herein by reference. |
| */ |
| |
| #include <linux/pci.h> |
| #include <linux/tcp.h> |
| #include <linux/ip.h> |
| #include <linux/in.h> |
| #include <linux/ipv6.h> |
| #include <linux/slab.h> |
| #include <net/ipv6.h> |
| #include <linux/if_ether.h> |
| #include <linux/highmem.h> |
| #include <linux/cache.h> |
| #include "net_driver.h" |
| #include "efx.h" |
| #include "io.h" |
| #include "nic.h" |
| #include "workarounds.h" |
| #include "ef10_regs.h" |
| |
| #ifdef EFX_USE_PIO |
| |
| #define EFX_PIOBUF_SIZE_MAX ER_DZ_TX_PIOBUF_SIZE |
| #define EFX_PIOBUF_SIZE_DEF ALIGN(256, L1_CACHE_BYTES) |
| unsigned int efx_piobuf_size __read_mostly = EFX_PIOBUF_SIZE_DEF; |
| |
| #endif /* EFX_USE_PIO */ |
| |
| static inline unsigned int |
| efx_tx_queue_get_insert_index(const struct efx_tx_queue *tx_queue) |
| { |
| return tx_queue->insert_count & tx_queue->ptr_mask; |
| } |
| |
| static inline struct efx_tx_buffer * |
| __efx_tx_queue_get_insert_buffer(const struct efx_tx_queue *tx_queue) |
| { |
| return &tx_queue->buffer[efx_tx_queue_get_insert_index(tx_queue)]; |
| } |
| |
| static inline struct efx_tx_buffer * |
| efx_tx_queue_get_insert_buffer(const struct efx_tx_queue *tx_queue) |
| { |
| struct efx_tx_buffer *buffer = |
| __efx_tx_queue_get_insert_buffer(tx_queue); |
| |
| EFX_BUG_ON_PARANOID(buffer->len); |
| EFX_BUG_ON_PARANOID(buffer->flags); |
| EFX_BUG_ON_PARANOID(buffer->unmap_len); |
| |
| return buffer; |
| } |
| |
| static void efx_dequeue_buffer(struct efx_tx_queue *tx_queue, |
| struct efx_tx_buffer *buffer, |
| unsigned int *pkts_compl, |
| unsigned int *bytes_compl) |
| { |
| if (buffer->unmap_len) { |
| struct device *dma_dev = &tx_queue->efx->pci_dev->dev; |
| dma_addr_t unmap_addr = buffer->dma_addr - buffer->dma_offset; |
| if (buffer->flags & EFX_TX_BUF_MAP_SINGLE) |
| dma_unmap_single(dma_dev, unmap_addr, buffer->unmap_len, |
| DMA_TO_DEVICE); |
| else |
| dma_unmap_page(dma_dev, unmap_addr, buffer->unmap_len, |
| DMA_TO_DEVICE); |
| buffer->unmap_len = 0; |
| } |
| |
| if (buffer->flags & EFX_TX_BUF_SKB) { |
| (*pkts_compl)++; |
| (*bytes_compl) += buffer->skb->len; |
| dev_kfree_skb_any((struct sk_buff *) buffer->skb); |
| netif_vdbg(tx_queue->efx, tx_done, tx_queue->efx->net_dev, |
| "TX queue %d transmission id %x complete\n", |
| tx_queue->queue, tx_queue->read_count); |
| } else if (buffer->flags & EFX_TX_BUF_HEAP) { |
| kfree(buffer->heap_buf); |
| } |
| |
| buffer->len = 0; |
| buffer->flags = 0; |
| } |
| |
| static int efx_enqueue_skb_tso(struct efx_tx_queue *tx_queue, |
| struct sk_buff *skb); |
| |
| static inline unsigned |
| efx_max_tx_len(struct efx_nic *efx, dma_addr_t dma_addr) |
| { |
| /* Depending on the NIC revision, we can use descriptor |
| * lengths up to 8K or 8K-1. However, since PCI Express |
| * devices must split read requests at 4K boundaries, there is |
| * little benefit from using descriptors that cross those |
| * boundaries and we keep things simple by not doing so. |
| */ |
| unsigned len = (~dma_addr & (EFX_PAGE_SIZE - 1)) + 1; |
| |
| /* Work around hardware bug for unaligned buffers. */ |
| if (EFX_WORKAROUND_5391(efx) && (dma_addr & 0xf)) |
| len = min_t(unsigned, len, 512 - (dma_addr & 0xf)); |
| |
| return len; |
| } |
| |
| unsigned int efx_tx_max_skb_descs(struct efx_nic *efx) |
| { |
| /* Header and payload descriptor for each output segment, plus |
| * one for every input fragment boundary within a segment |
| */ |
| unsigned int max_descs = EFX_TSO_MAX_SEGS * 2 + MAX_SKB_FRAGS; |
| |
| /* Possibly one more per segment for the alignment workaround, |
| * or for option descriptors |
| */ |
| if (EFX_WORKAROUND_5391(efx) || efx_nic_rev(efx) >= EFX_REV_HUNT_A0) |
| max_descs += EFX_TSO_MAX_SEGS; |
| |
| /* Possibly more for PCIe page boundaries within input fragments */ |
| if (PAGE_SIZE > EFX_PAGE_SIZE) |
| max_descs += max_t(unsigned int, MAX_SKB_FRAGS, |
| DIV_ROUND_UP(GSO_MAX_SIZE, EFX_PAGE_SIZE)); |
| |
| return max_descs; |
| } |
| |
| /* Get partner of a TX queue, seen as part of the same net core queue */ |
| static struct efx_tx_queue *efx_tx_queue_partner(struct efx_tx_queue *tx_queue) |
| { |
| if (tx_queue->queue & EFX_TXQ_TYPE_OFFLOAD) |
| return tx_queue - EFX_TXQ_TYPE_OFFLOAD; |
| else |
| return tx_queue + EFX_TXQ_TYPE_OFFLOAD; |
| } |
| |
| static void efx_tx_maybe_stop_queue(struct efx_tx_queue *txq1) |
| { |
| /* We need to consider both queues that the net core sees as one */ |
| struct efx_tx_queue *txq2 = efx_tx_queue_partner(txq1); |
| struct efx_nic *efx = txq1->efx; |
| unsigned int fill_level; |
| |
| fill_level = max(txq1->insert_count - txq1->old_read_count, |
| txq2->insert_count - txq2->old_read_count); |
| if (likely(fill_level < efx->txq_stop_thresh)) |
| return; |
| |
| /* We used the stale old_read_count above, which gives us a |
| * pessimistic estimate of the fill level (which may even |
| * validly be >= efx->txq_entries). Now try again using |
| * read_count (more likely to be a cache miss). |
| * |
| * If we read read_count and then conditionally stop the |
| * queue, it is possible for the completion path to race with |
| * us and complete all outstanding descriptors in the middle, |
| * after which there will be no more completions to wake it. |
| * Therefore we stop the queue first, then read read_count |
| * (with a memory barrier to ensure the ordering), then |
| * restart the queue if the fill level turns out to be low |
| * enough. |
| */ |
| netif_tx_stop_queue(txq1->core_txq); |
| smp_mb(); |
| txq1->old_read_count = ACCESS_ONCE(txq1->read_count); |
| txq2->old_read_count = ACCESS_ONCE(txq2->read_count); |
| |
| fill_level = max(txq1->insert_count - txq1->old_read_count, |
| txq2->insert_count - txq2->old_read_count); |
| EFX_BUG_ON_PARANOID(fill_level >= efx->txq_entries); |
| if (likely(fill_level < efx->txq_stop_thresh)) { |
| smp_mb(); |
| if (likely(!efx->loopback_selftest)) |
| netif_tx_start_queue(txq1->core_txq); |
| } |
| } |
| |
| #ifdef EFX_USE_PIO |
| |
| struct efx_short_copy_buffer { |
| int used; |
| u8 buf[L1_CACHE_BYTES]; |
| }; |
| |
| /* Copy to PIO, respecting that writes to PIO buffers must be dword aligned. |
| * Advances piobuf pointer. Leaves additional data in the copy buffer. |
| */ |
| static void efx_memcpy_toio_aligned(struct efx_nic *efx, u8 __iomem **piobuf, |
| u8 *data, int len, |
| struct efx_short_copy_buffer *copy_buf) |
| { |
| int block_len = len & ~(sizeof(copy_buf->buf) - 1); |
| |
| __iowrite64_copy(*piobuf, data, block_len >> 3); |
| *piobuf += block_len; |
| len -= block_len; |
| |
| if (len) { |
| data += block_len; |
| BUG_ON(copy_buf->used); |
| BUG_ON(len > sizeof(copy_buf->buf)); |
| memcpy(copy_buf->buf, data, len); |
| copy_buf->used = len; |
| } |
| } |
| |
| /* Copy to PIO, respecting dword alignment, popping data from copy buffer first. |
| * Advances piobuf pointer. Leaves additional data in the copy buffer. |
| */ |
| static void efx_memcpy_toio_aligned_cb(struct efx_nic *efx, u8 __iomem **piobuf, |
| u8 *data, int len, |
| struct efx_short_copy_buffer *copy_buf) |
| { |
| if (copy_buf->used) { |
| /* if the copy buffer is partially full, fill it up and write */ |
| int copy_to_buf = |
| min_t(int, sizeof(copy_buf->buf) - copy_buf->used, len); |
| |
| memcpy(copy_buf->buf + copy_buf->used, data, copy_to_buf); |
| copy_buf->used += copy_to_buf; |
| |
| /* if we didn't fill it up then we're done for now */ |
| if (copy_buf->used < sizeof(copy_buf->buf)) |
| return; |
| |
| __iowrite64_copy(*piobuf, copy_buf->buf, |
| sizeof(copy_buf->buf) >> 3); |
| *piobuf += sizeof(copy_buf->buf); |
| data += copy_to_buf; |
| len -= copy_to_buf; |
| copy_buf->used = 0; |
| } |
| |
| efx_memcpy_toio_aligned(efx, piobuf, data, len, copy_buf); |
| } |
| |
| static void efx_flush_copy_buffer(struct efx_nic *efx, u8 __iomem *piobuf, |
| struct efx_short_copy_buffer *copy_buf) |
| { |
| /* if there's anything in it, write the whole buffer, including junk */ |
| if (copy_buf->used) |
| __iowrite64_copy(piobuf, copy_buf->buf, |
| sizeof(copy_buf->buf) >> 3); |
| } |
| |
| /* Traverse skb structure and copy fragments in to PIO buffer. |
| * Advances piobuf pointer. |
| */ |
| static void efx_skb_copy_bits_to_pio(struct efx_nic *efx, struct sk_buff *skb, |
| u8 __iomem **piobuf, |
| struct efx_short_copy_buffer *copy_buf) |
| { |
| int i; |
| |
| efx_memcpy_toio_aligned(efx, piobuf, skb->data, skb_headlen(skb), |
| copy_buf); |
| |
| for (i = 0; i < skb_shinfo(skb)->nr_frags; ++i) { |
| skb_frag_t *f = &skb_shinfo(skb)->frags[i]; |
| u8 *vaddr; |
| |
| vaddr = kmap_atomic(skb_frag_page(f)); |
| |
| efx_memcpy_toio_aligned_cb(efx, piobuf, vaddr + f->page_offset, |
| skb_frag_size(f), copy_buf); |
| kunmap_atomic(vaddr); |
| } |
| |
| EFX_BUG_ON_PARANOID(skb_shinfo(skb)->frag_list); |
| } |
| |
| static struct efx_tx_buffer * |
| efx_enqueue_skb_pio(struct efx_tx_queue *tx_queue, struct sk_buff *skb) |
| { |
| struct efx_tx_buffer *buffer = |
| efx_tx_queue_get_insert_buffer(tx_queue); |
| u8 __iomem *piobuf = tx_queue->piobuf; |
| |
| /* Copy to PIO buffer. Ensure the writes are padded to the end |
| * of a cache line, as this is required for write-combining to be |
| * effective on at least x86. |
| */ |
| |
| if (skb_shinfo(skb)->nr_frags) { |
| /* The size of the copy buffer will ensure all writes |
| * are the size of a cache line. |
| */ |
| struct efx_short_copy_buffer copy_buf; |
| |
| copy_buf.used = 0; |
| |
| efx_skb_copy_bits_to_pio(tx_queue->efx, skb, |
| &piobuf, ©_buf); |
| efx_flush_copy_buffer(tx_queue->efx, piobuf, ©_buf); |
| } else { |
| /* Pad the write to the size of a cache line. |
| * We can do this because we know the skb_shared_info sruct is |
| * after the source, and the destination buffer is big enough. |
| */ |
| BUILD_BUG_ON(L1_CACHE_BYTES > |
| SKB_DATA_ALIGN(sizeof(struct skb_shared_info))); |
| __iowrite64_copy(tx_queue->piobuf, skb->data, |
| ALIGN(skb->len, L1_CACHE_BYTES) >> 3); |
| } |
| |
| EFX_POPULATE_QWORD_5(buffer->option, |
| ESF_DZ_TX_DESC_IS_OPT, 1, |
| ESF_DZ_TX_OPTION_TYPE, ESE_DZ_TX_OPTION_DESC_PIO, |
| ESF_DZ_TX_PIO_CONT, 0, |
| ESF_DZ_TX_PIO_BYTE_CNT, skb->len, |
| ESF_DZ_TX_PIO_BUF_ADDR, |
| tx_queue->piobuf_offset); |
| ++tx_queue->pio_packets; |
| ++tx_queue->insert_count; |
| return buffer; |
| } |
| #endif /* EFX_USE_PIO */ |
| |
| /* |
| * Add a socket buffer to a TX queue |
| * |
| * This maps all fragments of a socket buffer for DMA and adds them to |
| * the TX queue. The queue's insert pointer will be incremented by |
| * the number of fragments in the socket buffer. |
| * |
| * If any DMA mapping fails, any mapped fragments will be unmapped, |
| * the queue's insert pointer will be restored to its original value. |
| * |
| * This function is split out from efx_hard_start_xmit to allow the |
| * loopback test to direct packets via specific TX queues. |
| * |
| * Returns NETDEV_TX_OK. |
| * You must hold netif_tx_lock() to call this function. |
| */ |
| netdev_tx_t efx_enqueue_skb(struct efx_tx_queue *tx_queue, struct sk_buff *skb) |
| { |
| struct efx_nic *efx = tx_queue->efx; |
| struct device *dma_dev = &efx->pci_dev->dev; |
| struct efx_tx_buffer *buffer; |
| skb_frag_t *fragment; |
| unsigned int len, unmap_len = 0; |
| dma_addr_t dma_addr, unmap_addr = 0; |
| unsigned int dma_len; |
| unsigned short dma_flags; |
| int i = 0; |
| |
| EFX_BUG_ON_PARANOID(tx_queue->write_count != tx_queue->insert_count); |
| |
| if (skb_shinfo(skb)->gso_size) |
| return efx_enqueue_skb_tso(tx_queue, skb); |
| |
| /* Get size of the initial fragment */ |
| len = skb_headlen(skb); |
| |
| /* Pad if necessary */ |
| if (EFX_WORKAROUND_15592(efx) && skb->len <= 32) { |
| EFX_BUG_ON_PARANOID(skb->data_len); |
| len = 32 + 1; |
| if (skb_pad(skb, len - skb->len)) |
| return NETDEV_TX_OK; |
| } |
| |
| /* Consider using PIO for short packets */ |
| #ifdef EFX_USE_PIO |
| if (skb->len <= efx_piobuf_size && tx_queue->piobuf && |
| efx_nic_tx_is_empty(tx_queue) && |
| efx_nic_tx_is_empty(efx_tx_queue_partner(tx_queue))) { |
| buffer = efx_enqueue_skb_pio(tx_queue, skb); |
| dma_flags = EFX_TX_BUF_OPTION; |
| goto finish_packet; |
| } |
| #endif |
| |
| /* Map for DMA. Use dma_map_single rather than dma_map_page |
| * since this is more efficient on machines with sparse |
| * memory. |
| */ |
| dma_flags = EFX_TX_BUF_MAP_SINGLE; |
| dma_addr = dma_map_single(dma_dev, skb->data, len, PCI_DMA_TODEVICE); |
| |
| /* Process all fragments */ |
| while (1) { |
| if (unlikely(dma_mapping_error(dma_dev, dma_addr))) |
| goto dma_err; |
| |
| /* Store fields for marking in the per-fragment final |
| * descriptor */ |
| unmap_len = len; |
| unmap_addr = dma_addr; |
| |
| /* Add to TX queue, splitting across DMA boundaries */ |
| do { |
| buffer = efx_tx_queue_get_insert_buffer(tx_queue); |
| |
| dma_len = efx_max_tx_len(efx, dma_addr); |
| if (likely(dma_len >= len)) |
| dma_len = len; |
| |
| /* Fill out per descriptor fields */ |
| buffer->len = dma_len; |
| buffer->dma_addr = dma_addr; |
| buffer->flags = EFX_TX_BUF_CONT; |
| len -= dma_len; |
| dma_addr += dma_len; |
| ++tx_queue->insert_count; |
| } while (len); |
| |
| /* Transfer ownership of the unmapping to the final buffer */ |
| buffer->flags = EFX_TX_BUF_CONT | dma_flags; |
| buffer->unmap_len = unmap_len; |
| buffer->dma_offset = buffer->dma_addr - unmap_addr; |
| unmap_len = 0; |
| |
| /* Get address and size of next fragment */ |
| if (i >= skb_shinfo(skb)->nr_frags) |
| break; |
| fragment = &skb_shinfo(skb)->frags[i]; |
| len = skb_frag_size(fragment); |
| i++; |
| /* Map for DMA */ |
| dma_flags = 0; |
| dma_addr = skb_frag_dma_map(dma_dev, fragment, 0, len, |
| DMA_TO_DEVICE); |
| } |
| |
| /* Transfer ownership of the skb to the final buffer */ |
| #ifdef EFX_USE_PIO |
| finish_packet: |
| #endif |
| buffer->skb = skb; |
| buffer->flags = EFX_TX_BUF_SKB | dma_flags; |
| |
| netdev_tx_sent_queue(tx_queue->core_txq, skb->len); |
| |
| /* Pass off to hardware */ |
| efx_nic_push_buffers(tx_queue); |
| |
| tx_queue->tx_packets++; |
| |
| efx_tx_maybe_stop_queue(tx_queue); |
| |
| return NETDEV_TX_OK; |
| |
| dma_err: |
| netif_err(efx, tx_err, efx->net_dev, |
| " TX queue %d could not map skb with %d bytes %d " |
| "fragments for DMA\n", tx_queue->queue, skb->len, |
| skb_shinfo(skb)->nr_frags + 1); |
| |
| /* Mark the packet as transmitted, and free the SKB ourselves */ |
| dev_kfree_skb_any(skb); |
| |
| /* Work backwards until we hit the original insert pointer value */ |
| while (tx_queue->insert_count != tx_queue->write_count) { |
| unsigned int pkts_compl = 0, bytes_compl = 0; |
| --tx_queue->insert_count; |
| buffer = __efx_tx_queue_get_insert_buffer(tx_queue); |
| efx_dequeue_buffer(tx_queue, buffer, &pkts_compl, &bytes_compl); |
| } |
| |
| /* Free the fragment we were mid-way through pushing */ |
| if (unmap_len) { |
| if (dma_flags & EFX_TX_BUF_MAP_SINGLE) |
| dma_unmap_single(dma_dev, unmap_addr, unmap_len, |
| DMA_TO_DEVICE); |
| else |
| dma_unmap_page(dma_dev, unmap_addr, unmap_len, |
| DMA_TO_DEVICE); |
| } |
| |
| return NETDEV_TX_OK; |
| } |
| |
| /* Remove packets from the TX queue |
| * |
| * This removes packets from the TX queue, up to and including the |
| * specified index. |
| */ |
| static void efx_dequeue_buffers(struct efx_tx_queue *tx_queue, |
| unsigned int index, |
| unsigned int *pkts_compl, |
| unsigned int *bytes_compl) |
| { |
| struct efx_nic *efx = tx_queue->efx; |
| unsigned int stop_index, read_ptr; |
| |
| stop_index = (index + 1) & tx_queue->ptr_mask; |
| read_ptr = tx_queue->read_count & tx_queue->ptr_mask; |
| |
| while (read_ptr != stop_index) { |
| struct efx_tx_buffer *buffer = &tx_queue->buffer[read_ptr]; |
| |
| if (!(buffer->flags & EFX_TX_BUF_OPTION) && |
| unlikely(buffer->len == 0)) { |
| netif_err(efx, tx_err, efx->net_dev, |
| "TX queue %d spurious TX completion id %x\n", |
| tx_queue->queue, read_ptr); |
| efx_schedule_reset(efx, RESET_TYPE_TX_SKIP); |
| return; |
| } |
| |
| efx_dequeue_buffer(tx_queue, buffer, pkts_compl, bytes_compl); |
| |
| ++tx_queue->read_count; |
| read_ptr = tx_queue->read_count & tx_queue->ptr_mask; |
| } |
| } |
| |
| /* Initiate a packet transmission. We use one channel per CPU |
| * (sharing when we have more CPUs than channels). On Falcon, the TX |
| * completion events will be directed back to the CPU that transmitted |
| * the packet, which should be cache-efficient. |
| * |
| * Context: non-blocking. |
| * Note that returning anything other than NETDEV_TX_OK will cause the |
| * OS to free the skb. |
| */ |
| netdev_tx_t efx_hard_start_xmit(struct sk_buff *skb, |
| struct net_device *net_dev) |
| { |
| struct efx_nic *efx = netdev_priv(net_dev); |
| struct efx_tx_queue *tx_queue; |
| unsigned index, type; |
| |
| EFX_WARN_ON_PARANOID(!netif_device_present(net_dev)); |
| |
| /* PTP "event" packet */ |
| if (unlikely(efx_xmit_with_hwtstamp(skb)) && |
| unlikely(efx_ptp_is_ptp_tx(efx, skb))) { |
| return efx_ptp_tx(efx, skb); |
| } |
| |
| index = skb_get_queue_mapping(skb); |
| type = skb->ip_summed == CHECKSUM_PARTIAL ? EFX_TXQ_TYPE_OFFLOAD : 0; |
| if (index >= efx->n_tx_channels) { |
| index -= efx->n_tx_channels; |
| type |= EFX_TXQ_TYPE_HIGHPRI; |
| } |
| tx_queue = efx_get_tx_queue(efx, index, type); |
| |
| return efx_enqueue_skb(tx_queue, skb); |
| } |
| |
| void efx_init_tx_queue_core_txq(struct efx_tx_queue *tx_queue) |
| { |
| struct efx_nic *efx = tx_queue->efx; |
| |
| /* Must be inverse of queue lookup in efx_hard_start_xmit() */ |
| tx_queue->core_txq = |
| netdev_get_tx_queue(efx->net_dev, |
| tx_queue->queue / EFX_TXQ_TYPES + |
| ((tx_queue->queue & EFX_TXQ_TYPE_HIGHPRI) ? |
| efx->n_tx_channels : 0)); |
| } |
| |
| int efx_setup_tc(struct net_device *net_dev, u8 num_tc) |
| { |
| struct efx_nic *efx = netdev_priv(net_dev); |
| struct efx_channel *channel; |
| struct efx_tx_queue *tx_queue; |
| unsigned tc; |
| int rc; |
| |
| if (efx_nic_rev(efx) < EFX_REV_FALCON_B0 || num_tc > EFX_MAX_TX_TC) |
| return -EINVAL; |
| |
| if (num_tc == net_dev->num_tc) |
| return 0; |
| |
| for (tc = 0; tc < num_tc; tc++) { |
| net_dev->tc_to_txq[tc].offset = tc * efx->n_tx_channels; |
| net_dev->tc_to_txq[tc].count = efx->n_tx_channels; |
| } |
| |
| if (num_tc > net_dev->num_tc) { |
| /* Initialise high-priority queues as necessary */ |
| efx_for_each_channel(channel, efx) { |
| efx_for_each_possible_channel_tx_queue(tx_queue, |
| channel) { |
| if (!(tx_queue->queue & EFX_TXQ_TYPE_HIGHPRI)) |
| continue; |
| if (!tx_queue->buffer) { |
| rc = efx_probe_tx_queue(tx_queue); |
| if (rc) |
| return rc; |
| } |
| if (!tx_queue->initialised) |
| efx_init_tx_queue(tx_queue); |
| efx_init_tx_queue_core_txq(tx_queue); |
| } |
| } |
| } else { |
| /* Reduce number of classes before number of queues */ |
| net_dev->num_tc = num_tc; |
| } |
| |
| rc = netif_set_real_num_tx_queues(net_dev, |
| max_t(int, num_tc, 1) * |
| efx->n_tx_channels); |
| if (rc) |
| return rc; |
| |
| /* Do not destroy high-priority queues when they become |
| * unused. We would have to flush them first, and it is |
| * fairly difficult to flush a subset of TX queues. Leave |
| * it to efx_fini_channels(). |
| */ |
| |
| net_dev->num_tc = num_tc; |
| return 0; |
| } |
| |
| void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index) |
| { |
| unsigned fill_level; |
| struct efx_nic *efx = tx_queue->efx; |
| struct efx_tx_queue *txq2; |
| unsigned int pkts_compl = 0, bytes_compl = 0; |
| |
| EFX_BUG_ON_PARANOID(index > tx_queue->ptr_mask); |
| |
| efx_dequeue_buffers(tx_queue, index, &pkts_compl, &bytes_compl); |
| netdev_tx_completed_queue(tx_queue->core_txq, pkts_compl, bytes_compl); |
| |
| if (pkts_compl > 1) |
| ++tx_queue->merge_events; |
| |
| /* See if we need to restart the netif queue. This memory |
| * barrier ensures that we write read_count (inside |
| * efx_dequeue_buffers()) before reading the queue status. |
| */ |
| smp_mb(); |
| if (unlikely(netif_tx_queue_stopped(tx_queue->core_txq)) && |
| likely(efx->port_enabled) && |
| likely(netif_device_present(efx->net_dev))) { |
| txq2 = efx_tx_queue_partner(tx_queue); |
| fill_level = max(tx_queue->insert_count - tx_queue->read_count, |
| txq2->insert_count - txq2->read_count); |
| if (fill_level <= efx->txq_wake_thresh) |
| netif_tx_wake_queue(tx_queue->core_txq); |
| } |
| |
| /* Check whether the hardware queue is now empty */ |
| if ((int)(tx_queue->read_count - tx_queue->old_write_count) >= 0) { |
| tx_queue->old_write_count = ACCESS_ONCE(tx_queue->write_count); |
| if (tx_queue->read_count == tx_queue->old_write_count) { |
| smp_mb(); |
| tx_queue->empty_read_count = |
| tx_queue->read_count | EFX_EMPTY_COUNT_VALID; |
| } |
| } |
| } |
| |
| /* Size of page-based TSO header buffers. Larger blocks must be |
| * allocated from the heap. |
| */ |
| #define TSOH_STD_SIZE 128 |
| #define TSOH_PER_PAGE (PAGE_SIZE / TSOH_STD_SIZE) |
| |
| /* At most half the descriptors in the queue at any time will refer to |
| * a TSO header buffer, since they must always be followed by a |
| * payload descriptor referring to an skb. |
| */ |
| static unsigned int efx_tsoh_page_count(struct efx_tx_queue *tx_queue) |
| { |
| return DIV_ROUND_UP(tx_queue->ptr_mask + 1, 2 * TSOH_PER_PAGE); |
| } |
| |
| int efx_probe_tx_queue(struct efx_tx_queue *tx_queue) |
| { |
| struct efx_nic *efx = tx_queue->efx; |
| unsigned int entries; |
| int rc; |
| |
| /* Create the smallest power-of-two aligned ring */ |
| entries = max(roundup_pow_of_two(efx->txq_entries), EFX_MIN_DMAQ_SIZE); |
| EFX_BUG_ON_PARANOID(entries > EFX_MAX_DMAQ_SIZE); |
| tx_queue->ptr_mask = entries - 1; |
| |
| netif_dbg(efx, probe, efx->net_dev, |
| "creating TX queue %d size %#x mask %#x\n", |
| tx_queue->queue, efx->txq_entries, tx_queue->ptr_mask); |
| |
| /* Allocate software ring */ |
| tx_queue->buffer = kcalloc(entries, sizeof(*tx_queue->buffer), |
| GFP_KERNEL); |
| if (!tx_queue->buffer) |
| return -ENOMEM; |
| |
| if (tx_queue->queue & EFX_TXQ_TYPE_OFFLOAD) { |
| tx_queue->tsoh_page = |
| kcalloc(efx_tsoh_page_count(tx_queue), |
| sizeof(tx_queue->tsoh_page[0]), GFP_KERNEL); |
| if (!tx_queue->tsoh_page) { |
| rc = -ENOMEM; |
| goto fail1; |
| } |
| } |
| |
| /* Allocate hardware ring */ |
| rc = efx_nic_probe_tx(tx_queue); |
| if (rc) |
| goto fail2; |
| |
| return 0; |
| |
| fail2: |
| kfree(tx_queue->tsoh_page); |
| tx_queue->tsoh_page = NULL; |
| fail1: |
| kfree(tx_queue->buffer); |
| tx_queue->buffer = NULL; |
| return rc; |
| } |
| |
| void efx_init_tx_queue(struct efx_tx_queue *tx_queue) |
| { |
| netif_dbg(tx_queue->efx, drv, tx_queue->efx->net_dev, |
| "initialising TX queue %d\n", tx_queue->queue); |
| |
| tx_queue->insert_count = 0; |
| tx_queue->write_count = 0; |
| tx_queue->old_write_count = 0; |
| tx_queue->read_count = 0; |
| tx_queue->old_read_count = 0; |
| tx_queue->empty_read_count = 0 | EFX_EMPTY_COUNT_VALID; |
| |
| /* Set up TX descriptor ring */ |
| efx_nic_init_tx(tx_queue); |
| |
| tx_queue->initialised = true; |
| } |
| |
| void efx_fini_tx_queue(struct efx_tx_queue *tx_queue) |
| { |
| struct efx_tx_buffer *buffer; |
| |
| netif_dbg(tx_queue->efx, drv, tx_queue->efx->net_dev, |
| "shutting down TX queue %d\n", tx_queue->queue); |
| |
| if (!tx_queue->buffer) |
| return; |
| |
| /* Free any buffers left in the ring */ |
| while (tx_queue->read_count != tx_queue->write_count) { |
| unsigned int pkts_compl = 0, bytes_compl = 0; |
| buffer = &tx_queue->buffer[tx_queue->read_count & tx_queue->ptr_mask]; |
| efx_dequeue_buffer(tx_queue, buffer, &pkts_compl, &bytes_compl); |
| |
| ++tx_queue->read_count; |
| } |
| netdev_tx_reset_queue(tx_queue->core_txq); |
| } |
| |
| void efx_remove_tx_queue(struct efx_tx_queue *tx_queue) |
| { |
| int i; |
| |
| if (!tx_queue->buffer) |
| return; |
| |
| netif_dbg(tx_queue->efx, drv, tx_queue->efx->net_dev, |
| "destroying TX queue %d\n", tx_queue->queue); |
| efx_nic_remove_tx(tx_queue); |
| |
| if (tx_queue->tsoh_page) { |
| for (i = 0; i < efx_tsoh_page_count(tx_queue); i++) |
| efx_nic_free_buffer(tx_queue->efx, |
| &tx_queue->tsoh_page[i]); |
| kfree(tx_queue->tsoh_page); |
| tx_queue->tsoh_page = NULL; |
| } |
| |
| kfree(tx_queue->buffer); |
| tx_queue->buffer = NULL; |
| } |
| |
| |
| /* Efx TCP segmentation acceleration. |
| * |
| * Why? Because by doing it here in the driver we can go significantly |
| * faster than the GSO. |
| * |
| * Requires TX checksum offload support. |
| */ |
| |
| #define PTR_DIFF(p1, p2) ((u8 *)(p1) - (u8 *)(p2)) |
| |
| /** |
| * struct tso_state - TSO state for an SKB |
| * @out_len: Remaining length in current segment |
| * @seqnum: Current sequence number |
| * @ipv4_id: Current IPv4 ID, host endian |
| * @packet_space: Remaining space in current packet |
| * @dma_addr: DMA address of current position |
| * @in_len: Remaining length in current SKB fragment |
| * @unmap_len: Length of SKB fragment |
| * @unmap_addr: DMA address of SKB fragment |
| * @dma_flags: TX buffer flags for DMA mapping - %EFX_TX_BUF_MAP_SINGLE or 0 |
| * @protocol: Network protocol (after any VLAN header) |
| * @ip_off: Offset of IP header |
| * @tcp_off: Offset of TCP header |
| * @header_len: Number of bytes of header |
| * @ip_base_len: IPv4 tot_len or IPv6 payload_len, before TCP payload |
| * @header_dma_addr: Header DMA address, when using option descriptors |
| * @header_unmap_len: Header DMA mapped length, or 0 if not using option |
| * descriptors |
| * |
| * The state used during segmentation. It is put into this data structure |
| * just to make it easy to pass into inline functions. |
| */ |
| struct tso_state { |
| /* Output position */ |
| unsigned out_len; |
| unsigned seqnum; |
| u16 ipv4_id; |
| unsigned packet_space; |
| |
| /* Input position */ |
| dma_addr_t dma_addr; |
| unsigned in_len; |
| unsigned unmap_len; |
| dma_addr_t unmap_addr; |
| unsigned short dma_flags; |
| |
| __be16 protocol; |
| unsigned int ip_off; |
| unsigned int tcp_off; |
| unsigned header_len; |
| unsigned int ip_base_len; |
| dma_addr_t header_dma_addr; |
| unsigned int header_unmap_len; |
| }; |
| |
| |
| /* |
| * Verify that our various assumptions about sk_buffs and the conditions |
| * under which TSO will be attempted hold true. Return the protocol number. |
| */ |
| static __be16 efx_tso_check_protocol(struct sk_buff *skb) |
| { |
| __be16 protocol = skb->protocol; |
| |
| EFX_BUG_ON_PARANOID(((struct ethhdr *)skb->data)->h_proto != |
| protocol); |
| if (protocol == htons(ETH_P_8021Q)) { |
| struct vlan_ethhdr *veh = (struct vlan_ethhdr *)skb->data; |
| protocol = veh->h_vlan_encapsulated_proto; |
| } |
| |
| if (protocol == htons(ETH_P_IP)) { |
| EFX_BUG_ON_PARANOID(ip_hdr(skb)->protocol != IPPROTO_TCP); |
| } else { |
| EFX_BUG_ON_PARANOID(protocol != htons(ETH_P_IPV6)); |
| EFX_BUG_ON_PARANOID(ipv6_hdr(skb)->nexthdr != NEXTHDR_TCP); |
| } |
| EFX_BUG_ON_PARANOID((PTR_DIFF(tcp_hdr(skb), skb->data) |
| + (tcp_hdr(skb)->doff << 2u)) > |
| skb_headlen(skb)); |
| |
| return protocol; |
| } |
| |
| static u8 *efx_tsoh_get_buffer(struct efx_tx_queue *tx_queue, |
| struct efx_tx_buffer *buffer, unsigned int len) |
| { |
| u8 *result; |
| |
| EFX_BUG_ON_PARANOID(buffer->len); |
| EFX_BUG_ON_PARANOID(buffer->flags); |
| EFX_BUG_ON_PARANOID(buffer->unmap_len); |
| |
| if (likely(len <= TSOH_STD_SIZE - NET_IP_ALIGN)) { |
| unsigned index = |
| (tx_queue->insert_count & tx_queue->ptr_mask) / 2; |
| struct efx_buffer *page_buf = |
| &tx_queue->tsoh_page[index / TSOH_PER_PAGE]; |
| unsigned offset = |
| TSOH_STD_SIZE * (index % TSOH_PER_PAGE) + NET_IP_ALIGN; |
| |
| if (unlikely(!page_buf->addr) && |
| efx_nic_alloc_buffer(tx_queue->efx, page_buf, PAGE_SIZE, |
| GFP_ATOMIC)) |
| return NULL; |
| |
| result = (u8 *)page_buf->addr + offset; |
| buffer->dma_addr = page_buf->dma_addr + offset; |
| buffer->flags = EFX_TX_BUF_CONT; |
| } else { |
| tx_queue->tso_long_headers++; |
| |
| buffer->heap_buf = kmalloc(NET_IP_ALIGN + len, GFP_ATOMIC); |
| if (unlikely(!buffer->heap_buf)) |
| return NULL; |
| result = (u8 *)buffer->heap_buf + NET_IP_ALIGN; |
| buffer->flags = EFX_TX_BUF_CONT | EFX_TX_BUF_HEAP; |
| } |
| |
| buffer->len = len; |
| |
| return result; |
| } |
| |
| /** |
| * efx_tx_queue_insert - push descriptors onto the TX queue |
| * @tx_queue: Efx TX queue |
| * @dma_addr: DMA address of fragment |
| * @len: Length of fragment |
| * @final_buffer: The final buffer inserted into the queue |
| * |
| * Push descriptors onto the TX queue. |
| */ |
| static void efx_tx_queue_insert(struct efx_tx_queue *tx_queue, |
| dma_addr_t dma_addr, unsigned len, |
| struct efx_tx_buffer **final_buffer) |
| { |
| struct efx_tx_buffer *buffer; |
| struct efx_nic *efx = tx_queue->efx; |
| unsigned dma_len; |
| |
| EFX_BUG_ON_PARANOID(len <= 0); |
| |
| while (1) { |
| buffer = efx_tx_queue_get_insert_buffer(tx_queue); |
| ++tx_queue->insert_count; |
| |
| EFX_BUG_ON_PARANOID(tx_queue->insert_count - |
| tx_queue->read_count >= |
| efx->txq_entries); |
| |
| buffer->dma_addr = dma_addr; |
| |
| dma_len = efx_max_tx_len(efx, dma_addr); |
| |
| /* If there is enough space to send then do so */ |
| if (dma_len >= len) |
| break; |
| |
| buffer->len = dma_len; |
| buffer->flags = EFX_TX_BUF_CONT; |
| dma_addr += dma_len; |
| len -= dma_len; |
| } |
| |
| EFX_BUG_ON_PARANOID(!len); |
| buffer->len = len; |
| *final_buffer = buffer; |
| } |
| |
| |
| /* |
| * Put a TSO header into the TX queue. |
| * |
| * This is special-cased because we know that it is small enough to fit in |
| * a single fragment, and we know it doesn't cross a page boundary. It |
| * also allows us to not worry about end-of-packet etc. |
| */ |
| static int efx_tso_put_header(struct efx_tx_queue *tx_queue, |
| struct efx_tx_buffer *buffer, u8 *header) |
| { |
| if (unlikely(buffer->flags & EFX_TX_BUF_HEAP)) { |
| buffer->dma_addr = dma_map_single(&tx_queue->efx->pci_dev->dev, |
| header, buffer->len, |
| DMA_TO_DEVICE); |
| if (unlikely(dma_mapping_error(&tx_queue->efx->pci_dev->dev, |
| buffer->dma_addr))) { |
| kfree(buffer->heap_buf); |
| buffer->len = 0; |
| buffer->flags = 0; |
| return -ENOMEM; |
| } |
| buffer->unmap_len = buffer->len; |
| buffer->dma_offset = 0; |
| buffer->flags |= EFX_TX_BUF_MAP_SINGLE; |
| } |
| |
| ++tx_queue->insert_count; |
| return 0; |
| } |
| |
| |
| /* Remove buffers put into a tx_queue. None of the buffers must have |
| * an skb attached. |
| */ |
| static void efx_enqueue_unwind(struct efx_tx_queue *tx_queue) |
| { |
| struct efx_tx_buffer *buffer; |
| |
| /* Work backwards until we hit the original insert pointer value */ |
| while (tx_queue->insert_count != tx_queue->write_count) { |
| --tx_queue->insert_count; |
| buffer = __efx_tx_queue_get_insert_buffer(tx_queue); |
| efx_dequeue_buffer(tx_queue, buffer, NULL, NULL); |
| } |
| } |
| |
| |
| /* Parse the SKB header and initialise state. */ |
| static int tso_start(struct tso_state *st, struct efx_nic *efx, |
| const struct sk_buff *skb) |
| { |
| bool use_opt_desc = efx_nic_rev(efx) >= EFX_REV_HUNT_A0; |
| struct device *dma_dev = &efx->pci_dev->dev; |
| unsigned int header_len, in_len; |
| dma_addr_t dma_addr; |
| |
| st->ip_off = skb_network_header(skb) - skb->data; |
| st->tcp_off = skb_transport_header(skb) - skb->data; |
| header_len = st->tcp_off + (tcp_hdr(skb)->doff << 2u); |
| in_len = skb_headlen(skb) - header_len; |
| st->header_len = header_len; |
| st->in_len = in_len; |
| if (st->protocol == htons(ETH_P_IP)) { |
| st->ip_base_len = st->header_len - st->ip_off; |
| st->ipv4_id = ntohs(ip_hdr(skb)->id); |
| } else { |
| st->ip_base_len = st->header_len - st->tcp_off; |
| st->ipv4_id = 0; |
| } |
| st->seqnum = ntohl(tcp_hdr(skb)->seq); |
| |
| EFX_BUG_ON_PARANOID(tcp_hdr(skb)->urg); |
| EFX_BUG_ON_PARANOID(tcp_hdr(skb)->syn); |
| EFX_BUG_ON_PARANOID(tcp_hdr(skb)->rst); |
| |
| st->out_len = skb->len - header_len; |
| |
| if (!use_opt_desc) { |
| st->header_unmap_len = 0; |
| |
| if (likely(in_len == 0)) { |
| st->dma_flags = 0; |
| st->unmap_len = 0; |
| return 0; |
| } |
| |
| dma_addr = dma_map_single(dma_dev, skb->data + header_len, |
| in_len, DMA_TO_DEVICE); |
| st->dma_flags = EFX_TX_BUF_MAP_SINGLE; |
| st->dma_addr = dma_addr; |
| st->unmap_addr = dma_addr; |
| st->unmap_len = in_len; |
| } else { |
| dma_addr = dma_map_single(dma_dev, skb->data, |
| skb_headlen(skb), DMA_TO_DEVICE); |
| st->header_dma_addr = dma_addr; |
| st->header_unmap_len = skb_headlen(skb); |
| st->dma_flags = 0; |
| st->dma_addr = dma_addr + header_len; |
| st->unmap_len = 0; |
| } |
| |
| return unlikely(dma_mapping_error(dma_dev, dma_addr)) ? -ENOMEM : 0; |
| } |
| |
| static int tso_get_fragment(struct tso_state *st, struct efx_nic *efx, |
| skb_frag_t *frag) |
| { |
| st->unmap_addr = skb_frag_dma_map(&efx->pci_dev->dev, frag, 0, |
| skb_frag_size(frag), DMA_TO_DEVICE); |
| if (likely(!dma_mapping_error(&efx->pci_dev->dev, st->unmap_addr))) { |
| st->dma_flags = 0; |
| st->unmap_len = skb_frag_size(frag); |
| st->in_len = skb_frag_size(frag); |
| st->dma_addr = st->unmap_addr; |
| return 0; |
| } |
| return -ENOMEM; |
| } |
| |
| |
| /** |
| * tso_fill_packet_with_fragment - form descriptors for the current fragment |
| * @tx_queue: Efx TX queue |
| * @skb: Socket buffer |
| * @st: TSO state |
| * |
| * Form descriptors for the current fragment, until we reach the end |
| * of fragment or end-of-packet. |
| */ |
| static void tso_fill_packet_with_fragment(struct efx_tx_queue *tx_queue, |
| const struct sk_buff *skb, |
| struct tso_state *st) |
| { |
| struct efx_tx_buffer *buffer; |
| int n; |
| |
| if (st->in_len == 0) |
| return; |
| if (st->packet_space == 0) |
| return; |
| |
| EFX_BUG_ON_PARANOID(st->in_len <= 0); |
| EFX_BUG_ON_PARANOID(st->packet_space <= 0); |
| |
| n = min(st->in_len, st->packet_space); |
| |
| st->packet_space -= n; |
| st->out_len -= n; |
| st->in_len -= n; |
| |
| efx_tx_queue_insert(tx_queue, st->dma_addr, n, &buffer); |
| |
| if (st->out_len == 0) { |
| /* Transfer ownership of the skb */ |
| buffer->skb = skb; |
| buffer->flags = EFX_TX_BUF_SKB; |
| } else if (st->packet_space != 0) { |
| buffer->flags = EFX_TX_BUF_CONT; |
| } |
| |
| if (st->in_len == 0) { |
| /* Transfer ownership of the DMA mapping */ |
| buffer->unmap_len = st->unmap_len; |
| buffer->dma_offset = buffer->unmap_len - buffer->len; |
| buffer->flags |= st->dma_flags; |
| st->unmap_len = 0; |
| } |
| |
| st->dma_addr += n; |
| } |
| |
| |
| /** |
| * tso_start_new_packet - generate a new header and prepare for the new packet |
| * @tx_queue: Efx TX queue |
| * @skb: Socket buffer |
| * @st: TSO state |
| * |
| * Generate a new header and prepare for the new packet. Return 0 on |
| * success, or -%ENOMEM if failed to alloc header. |
| */ |
| static int tso_start_new_packet(struct efx_tx_queue *tx_queue, |
| const struct sk_buff *skb, |
| struct tso_state *st) |
| { |
| struct efx_tx_buffer *buffer = |
| efx_tx_queue_get_insert_buffer(tx_queue); |
| bool is_last = st->out_len <= skb_shinfo(skb)->gso_size; |
| u8 tcp_flags_clear; |
| |
| if (!is_last) { |
| st->packet_space = skb_shinfo(skb)->gso_size; |
| tcp_flags_clear = 0x09; /* mask out FIN and PSH */ |
| } else { |
| st->packet_space = st->out_len; |
| tcp_flags_clear = 0x00; |
| } |
| |
| if (!st->header_unmap_len) { |
| /* Allocate and insert a DMA-mapped header buffer. */ |
| struct tcphdr *tsoh_th; |
| unsigned ip_length; |
| u8 *header; |
| int rc; |
| |
| header = efx_tsoh_get_buffer(tx_queue, buffer, st->header_len); |
| if (!header) |
| return -ENOMEM; |
| |
| tsoh_th = (struct tcphdr *)(header + st->tcp_off); |
| |
| /* Copy and update the headers. */ |
| memcpy(header, skb->data, st->header_len); |
| |
| tsoh_th->seq = htonl(st->seqnum); |
| ((u8 *)tsoh_th)[13] &= ~tcp_flags_clear; |
| |
| ip_length = st->ip_base_len + st->packet_space; |
| |
| if (st->protocol == htons(ETH_P_IP)) { |
| struct iphdr *tsoh_iph = |
| (struct iphdr *)(header + st->ip_off); |
| |
| tsoh_iph->tot_len = htons(ip_length); |
| tsoh_iph->id = htons(st->ipv4_id); |
| } else { |
| struct ipv6hdr *tsoh_iph = |
| (struct ipv6hdr *)(header + st->ip_off); |
| |
| tsoh_iph->payload_len = htons(ip_length); |
| } |
| |
| rc = efx_tso_put_header(tx_queue, buffer, header); |
| if (unlikely(rc)) |
| return rc; |
| } else { |
| /* Send the original headers with a TSO option descriptor |
| * in front |
| */ |
| u8 tcp_flags = ((u8 *)tcp_hdr(skb))[13] & ~tcp_flags_clear; |
| |
| buffer->flags = EFX_TX_BUF_OPTION; |
| buffer->len = 0; |
| buffer->unmap_len = 0; |
| EFX_POPULATE_QWORD_5(buffer->option, |
| ESF_DZ_TX_DESC_IS_OPT, 1, |
| ESF_DZ_TX_OPTION_TYPE, |
| ESE_DZ_TX_OPTION_DESC_TSO, |
| ESF_DZ_TX_TSO_TCP_FLAGS, tcp_flags, |
| ESF_DZ_TX_TSO_IP_ID, st->ipv4_id, |
| ESF_DZ_TX_TSO_TCP_SEQNO, st->seqnum); |
| ++tx_queue->insert_count; |
| |
| /* We mapped the headers in tso_start(). Unmap them |
| * when the last segment is completed. |
| */ |
| buffer = efx_tx_queue_get_insert_buffer(tx_queue); |
| buffer->dma_addr = st->header_dma_addr; |
| buffer->len = st->header_len; |
| if (is_last) { |
| buffer->flags = EFX_TX_BUF_CONT | EFX_TX_BUF_MAP_SINGLE; |
| buffer->unmap_len = st->header_unmap_len; |
| buffer->dma_offset = 0; |
| /* Ensure we only unmap them once in case of a |
| * later DMA mapping error and rollback |
| */ |
| st->header_unmap_len = 0; |
| } else { |
| buffer->flags = EFX_TX_BUF_CONT; |
| buffer->unmap_len = 0; |
| } |
| ++tx_queue->insert_count; |
| } |
| |
| st->seqnum += skb_shinfo(skb)->gso_size; |
| |
| /* Linux leaves suitable gaps in the IP ID space for us to fill. */ |
| ++st->ipv4_id; |
| |
| ++tx_queue->tso_packets; |
| |
| ++tx_queue->tx_packets; |
| |
| return 0; |
| } |
| |
| |
| /** |
| * efx_enqueue_skb_tso - segment and transmit a TSO socket buffer |
| * @tx_queue: Efx TX queue |
| * @skb: Socket buffer |
| * |
| * Context: You must hold netif_tx_lock() to call this function. |
| * |
| * Add socket buffer @skb to @tx_queue, doing TSO or return != 0 if |
| * @skb was not enqueued. In all cases @skb is consumed. Return |
| * %NETDEV_TX_OK. |
| */ |
| static int efx_enqueue_skb_tso(struct efx_tx_queue *tx_queue, |
| struct sk_buff *skb) |
| { |
| struct efx_nic *efx = tx_queue->efx; |
| int frag_i, rc; |
| struct tso_state state; |
| |
| /* Find the packet protocol and sanity-check it */ |
| state.protocol = efx_tso_check_protocol(skb); |
| |
| EFX_BUG_ON_PARANOID(tx_queue->write_count != tx_queue->insert_count); |
| |
| rc = tso_start(&state, efx, skb); |
| if (rc) |
| goto mem_err; |
| |
| if (likely(state.in_len == 0)) { |
| /* Grab the first payload fragment. */ |
| EFX_BUG_ON_PARANOID(skb_shinfo(skb)->nr_frags < 1); |
| frag_i = 0; |
| rc = tso_get_fragment(&state, efx, |
| skb_shinfo(skb)->frags + frag_i); |
| if (rc) |
| goto mem_err; |
| } else { |
| /* Payload starts in the header area. */ |
| frag_i = -1; |
| } |
| |
| if (tso_start_new_packet(tx_queue, skb, &state) < 0) |
| goto mem_err; |
| |
| while (1) { |
| tso_fill_packet_with_fragment(tx_queue, skb, &state); |
| |
| /* Move onto the next fragment? */ |
| if (state.in_len == 0) { |
| if (++frag_i >= skb_shinfo(skb)->nr_frags) |
| /* End of payload reached. */ |
| break; |
| rc = tso_get_fragment(&state, efx, |
| skb_shinfo(skb)->frags + frag_i); |
| if (rc) |
| goto mem_err; |
| } |
| |
| /* Start at new packet? */ |
| if (state.packet_space == 0 && |
| tso_start_new_packet(tx_queue, skb, &state) < 0) |
| goto mem_err; |
| } |
| |
| netdev_tx_sent_queue(tx_queue->core_txq, skb->len); |
| |
| /* Pass off to hardware */ |
| efx_nic_push_buffers(tx_queue); |
| |
| efx_tx_maybe_stop_queue(tx_queue); |
| |
| tx_queue->tso_bursts++; |
| return NETDEV_TX_OK; |
| |
| mem_err: |
| netif_err(efx, tx_err, efx->net_dev, |
| "Out of memory for TSO headers, or DMA mapping error\n"); |
| dev_kfree_skb_any(skb); |
| |
| /* Free the DMA mapping we were in the process of writing out */ |
| if (state.unmap_len) { |
| if (state.dma_flags & EFX_TX_BUF_MAP_SINGLE) |
| dma_unmap_single(&efx->pci_dev->dev, state.unmap_addr, |
| state.unmap_len, DMA_TO_DEVICE); |
| else |
| dma_unmap_page(&efx->pci_dev->dev, state.unmap_addr, |
| state.unmap_len, DMA_TO_DEVICE); |
| } |
| |
| /* Free the header DMA mapping, if using option descriptors */ |
| if (state.header_unmap_len) |
| dma_unmap_single(&efx->pci_dev->dev, state.header_dma_addr, |
| state.header_unmap_len, DMA_TO_DEVICE); |
| |
| efx_enqueue_unwind(tx_queue); |
| return NETDEV_TX_OK; |
| } |