| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * max517.c - Support for Maxim MAX517, MAX518 and MAX519 |
| * |
| * Copyright (C) 2010, 2011 Roland Stigge <stigge@antcom.de> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/jiffies.h> |
| #include <linux/i2c.h> |
| #include <linux/err.h> |
| |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/iio/dac/max517.h> |
| |
| #define MAX517_DRV_NAME "max517" |
| |
| /* Commands */ |
| #define COMMAND_CHANNEL0 0x00 |
| #define COMMAND_CHANNEL1 0x01 /* for MAX518 and MAX519 */ |
| #define COMMAND_PD 0x08 /* Power Down */ |
| |
| enum max517_device_ids { |
| ID_MAX517, |
| ID_MAX518, |
| ID_MAX519, |
| ID_MAX520, |
| ID_MAX521, |
| }; |
| |
| struct max517_data { |
| struct i2c_client *client; |
| unsigned short vref_mv[8]; |
| }; |
| |
| /* |
| * channel: bit 0: channel 1 |
| * bit 1: channel 2 |
| * (this way, it's possible to set both channels at once) |
| */ |
| static int max517_set_value(struct iio_dev *indio_dev, |
| long val, int channel) |
| { |
| struct max517_data *data = iio_priv(indio_dev); |
| struct i2c_client *client = data->client; |
| u8 outbuf[2]; |
| int res; |
| |
| if (val < 0 || val > 255) |
| return -EINVAL; |
| |
| outbuf[0] = channel; |
| outbuf[1] = val; |
| |
| res = i2c_master_send(client, outbuf, 2); |
| if (res < 0) |
| return res; |
| else if (res != 2) |
| return -EIO; |
| else |
| return 0; |
| } |
| |
| static int max517_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, |
| int *val2, |
| long m) |
| { |
| struct max517_data *data = iio_priv(indio_dev); |
| |
| switch (m) { |
| case IIO_CHAN_INFO_SCALE: |
| /* Corresponds to Vref / 2^(bits) */ |
| *val = data->vref_mv[chan->channel]; |
| *val2 = 8; |
| return IIO_VAL_FRACTIONAL_LOG2; |
| default: |
| break; |
| } |
| return -EINVAL; |
| } |
| |
| static int max517_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int val, int val2, long mask) |
| { |
| int ret; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| ret = max517_set_value(indio_dev, val, chan->channel); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int max517_suspend(struct device *dev) |
| { |
| u8 outbuf = COMMAND_PD; |
| |
| return i2c_master_send(to_i2c_client(dev), &outbuf, 1); |
| } |
| |
| static int max517_resume(struct device *dev) |
| { |
| u8 outbuf = 0; |
| |
| return i2c_master_send(to_i2c_client(dev), &outbuf, 1); |
| } |
| |
| static DEFINE_SIMPLE_DEV_PM_OPS(max517_pm_ops, max517_suspend, max517_resume); |
| |
| static const struct iio_info max517_info = { |
| .read_raw = max517_read_raw, |
| .write_raw = max517_write_raw, |
| }; |
| |
| #define MAX517_CHANNEL(chan) { \ |
| .type = IIO_VOLTAGE, \ |
| .indexed = 1, \ |
| .output = 1, \ |
| .channel = (chan), \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ |
| BIT(IIO_CHAN_INFO_SCALE), \ |
| } |
| |
| static const struct iio_chan_spec max517_channels[] = { |
| MAX517_CHANNEL(0), |
| MAX517_CHANNEL(1), |
| MAX517_CHANNEL(2), |
| MAX517_CHANNEL(3), |
| MAX517_CHANNEL(4), |
| MAX517_CHANNEL(5), |
| MAX517_CHANNEL(6), |
| MAX517_CHANNEL(7), |
| }; |
| |
| static int max517_probe(struct i2c_client *client) |
| { |
| const struct i2c_device_id *id = i2c_client_get_device_id(client); |
| struct max517_data *data; |
| struct iio_dev *indio_dev; |
| struct max517_platform_data *platform_data = client->dev.platform_data; |
| int chan; |
| |
| indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); |
| if (!indio_dev) |
| return -ENOMEM; |
| data = iio_priv(indio_dev); |
| data->client = client; |
| |
| switch (id->driver_data) { |
| case ID_MAX521: |
| indio_dev->num_channels = 8; |
| break; |
| case ID_MAX520: |
| indio_dev->num_channels = 4; |
| break; |
| case ID_MAX519: |
| case ID_MAX518: |
| indio_dev->num_channels = 2; |
| break; |
| default: /* single channel for MAX517 */ |
| indio_dev->num_channels = 1; |
| break; |
| } |
| indio_dev->channels = max517_channels; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->info = &max517_info; |
| |
| /* |
| * Reference voltage on MAX518 and default is 5V, else take vref_mv |
| * from platform_data |
| */ |
| for (chan = 0; chan < indio_dev->num_channels; chan++) { |
| if (id->driver_data == ID_MAX518 || !platform_data) |
| data->vref_mv[chan] = 5000; /* mV */ |
| else |
| data->vref_mv[chan] = platform_data->vref_mv[chan]; |
| } |
| |
| return devm_iio_device_register(&client->dev, indio_dev); |
| } |
| |
| static const struct i2c_device_id max517_id[] = { |
| { "max517", ID_MAX517 }, |
| { "max518", ID_MAX518 }, |
| { "max519", ID_MAX519 }, |
| { "max520", ID_MAX520 }, |
| { "max521", ID_MAX521 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, max517_id); |
| |
| static struct i2c_driver max517_driver = { |
| .driver = { |
| .name = MAX517_DRV_NAME, |
| .pm = pm_sleep_ptr(&max517_pm_ops), |
| }, |
| .probe = max517_probe, |
| .id_table = max517_id, |
| }; |
| module_i2c_driver(max517_driver); |
| |
| MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>"); |
| MODULE_DESCRIPTION("MAX517/518/519/520/521 8-bit DAC"); |
| MODULE_LICENSE("GPL"); |