blob: 1a12aab208b465d32cbf2b4d80de61c1a54cc14a [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0
#
# USB Gadget support on a system involves
# (a) a peripheral controller, and
# (b) the gadget driver using it.
#
# NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
#
# - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
# - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
# - Some systems have both kinds of controllers.
#
# With help from a special transceiver and a "Mini-AB" jack, systems with
# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
#
#
# USB Peripheral Controller Support
#
# The order here is alphabetical, except that integrated controllers go
# before discrete ones so they will be the initial/default value:
# - integrated/SOC controllers first
# - licensed IP used in both SOC and discrete versions
# - discrete ones (including all PCI-only controllers)
# - debug/dummy gadget+hcd is last.
#
menu "USB Peripheral Controller"
#
# Integrated controllers
#
config USB_AT91
tristate "Atmel AT91 USB Device Port"
depends on ARCH_AT91
depends on OF || COMPILE_TEST
help
Many Atmel AT91 processors (such as the AT91RM2000) have a
full speed USB Device Port with support for five configurable
endpoints (plus endpoint zero).
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "at91_udc" and force all
gadget drivers to also be dynamically linked.
config USB_LPC32XX
tristate "LPC32XX USB Peripheral Controller"
depends on ARCH_LPC32XX || COMPILE_TEST
depends on I2C
select USB_ISP1301
help
This option selects the USB device controller in the LPC32xx SoC.
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "lpc32xx_udc" and force all
gadget drivers to also be dynamically linked.
config USB_ATMEL_USBA
tristate "Atmel USBA"
depends on ARCH_AT91
help
USBA is the integrated high-speed USB Device controller on
the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
The fifo_mode parameter is used to select endpoint allocation mode.
fifo_mode = 0 is used to let the driver autoconfigure the endpoints.
In this case, for ep1 2 banks are allocated if it works in isochronous
mode and only 1 bank otherwise. For the rest of the endpoints
only 1 bank is allocated.
fifo_mode = 1 is a generic maximum fifo size (1024 bytes) configuration
allowing the usage of ep1 - ep6
fifo_mode = 2 is a generic performance maximum fifo size (1024 bytes)
configuration allowing the usage of ep1 - ep3
fifo_mode = 3 is a balanced performance configuration allowing the
the usage of ep1 - ep8
config USB_BCM63XX_UDC
tristate "Broadcom BCM63xx Peripheral Controller"
depends on BCM63XX
help
Many Broadcom BCM63xx chipsets (such as the BCM6328) have a
high speed USB Device Port with support for four fixed endpoints
(plus endpoint zero).
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "bcm63xx_udc".
config USB_FSL_USB2
tristate "Freescale Highspeed USB DR Peripheral Controller"
depends on FSL_SOC || ARCH_MXC
help
Some of Freescale PowerPC and i.MX processors have a High Speed
Dual-Role(DR) USB controller, which supports device mode.
The number of programmable endpoints is different through
SOC revisions.
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "fsl_usb2_udc" and force
all gadget drivers to also be dynamically linked.
config USB_FUSB300
tristate "Faraday FUSB300 USB Peripheral Controller"
depends on !PHYS_ADDR_T_64BIT && HAS_DMA
help
Faraday usb device controller FUSB300 driver
config USB_FOTG210_UDC
depends on HAS_DMA
tristate "Faraday FOTG210 USB Peripheral Controller"
help
Faraday USB2.0 OTG controller which can be configured as
high speed or full speed USB device. This driver supppors
Bulk Transfer so far.
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "fotg210_udc".
config USB_GR_UDC
tristate "Aeroflex Gaisler GRUSBDC USB Peripheral Controller Driver"
depends on HAS_DMA
help
Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB
VHDL IP core library.
config USB_OMAP
tristate "OMAP USB Device Controller"
depends on ARCH_OMAP1
depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3)
help
Many Texas Instruments OMAP processors have flexible full
speed USB device controllers, with support for up to 30
endpoints (plus endpoint zero). This driver supports the
controller in the OMAP 1611, and should work with controllers
in other OMAP processors too, given minor tweaks.
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "omap_udc" and force all
gadget drivers to also be dynamically linked.
config USB_PXA25X
tristate "PXA 25x or IXP 4xx"
depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
depends on HAS_IOMEM
help
Intel's PXA 25x series XScale ARM-5TE processors include
an integrated full speed USB 1.1 device controller. The
controller in the IXP 4xx series is register-compatible.
It has fifteen fixed-function endpoints, as well as endpoint
zero (for control transfers).
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "pxa25x_udc" and force all
gadget drivers to also be dynamically linked.
# if there's only one gadget driver, using only two bulk endpoints,
# don't waste memory for the other endpoints
config USB_PXA25X_SMALL
depends on USB_PXA25X
bool
default n if USB_ETH_RNDIS
default y if USB_ZERO
default y if USB_ETH
default y if USB_G_SERIAL
config USB_R8A66597
tristate "Renesas R8A66597 USB Peripheral Controller"
depends on HAS_DMA
help
R8A66597 is a discrete USB host and peripheral controller chip that
supports both full and high speed USB 2.0 data transfers.
It has nine configurable endpoints, and endpoint zero.
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "r8a66597_udc" and force all
gadget drivers to also be dynamically linked.
config USB_RENESAS_USBHS_UDC
tristate 'Renesas USBHS controller'
depends on USB_RENESAS_USBHS
help
Renesas USBHS is a discrete USB host and peripheral controller chip
that supports both full and high speed USB 2.0 data transfers.
It has nine or more configurable endpoints, and endpoint zero.
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "renesas_usbhs" and force all
gadget drivers to also be dynamically linked.
config USB_RENESAS_USB3
tristate 'Renesas USB3.0 Peripheral controller'
depends on ARCH_RENESAS || COMPILE_TEST
depends on EXTCON
select USB_ROLE_SWITCH
help
Renesas USB3.0 Peripheral controller is a USB peripheral controller
that supports super, high, and full speed USB 3.0 data transfers.
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "renesas_usb3" and force all
gadget drivers to also be dynamically linked.
config USB_PXA27X
tristate "PXA 27x"
depends on HAS_IOMEM
help
Intel's PXA 27x series XScale ARM v5TE processors include
an integrated full speed USB 1.1 device controller.
It has up to 23 endpoints, as well as endpoint zero (for
control transfers).
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "pxa27x_udc" and force all
gadget drivers to also be dynamically linked.
config USB_S3C2410
tristate "S3C2410 USB Device Controller"
depends on ARCH_S3C24XX
help
Samsung's S3C2410 is an ARM-4 processor with an integrated
full speed USB 1.1 device controller. It has 4 configurable
endpoints, as well as endpoint zero (for control transfers).
This driver has been tested on the S3C2410, S3C2412, and
S3C2440 processors.
config USB_S3C2410_DEBUG
bool "S3C2410 udc debug messages"
depends on USB_S3C2410
config USB_S3C_HSUDC
tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller"
depends on ARCH_S3C24XX
help
Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC
integrated with dual speed USB 2.0 device controller. It has
8 endpoints, as well as endpoint zero.
This driver has been tested on S3C2416 and S3C2450 processors.
config USB_MV_UDC
tristate "Marvell USB2.0 Device Controller"
depends on HAS_DMA
help
Marvell Socs (including PXA and MMP series) include a high speed
USB2.0 OTG controller, which can be configured as high speed or
full speed USB peripheral.
config USB_MV_U3D
depends on HAS_DMA
tristate "MARVELL PXA2128 USB 3.0 controller"
help
MARVELL PXA2128 Processor series include a super speed USB3.0 device
controller, which support super speed USB peripheral.
config USB_SNP_CORE
depends on (USB_AMD5536UDC || USB_SNP_UDC_PLAT)
depends on HAS_DMA
tristate
help
This enables core driver support for Synopsys USB 2.0 Device
controller.
This will be enabled when PCI or Platform driver for this UDC is
selected. Currently, this will be enabled by USB_SNP_UDC_PLAT or
USB_AMD5536UDC options.
This IP is different to the High Speed OTG IP that can be enabled
by selecting USB_DWC2 or USB_DWC3 options.
config USB_SNP_UDC_PLAT
tristate "Synopsys USB 2.0 Device controller"
depends on USB_GADGET && OF && HAS_DMA
depends on EXTCON || EXTCON=n
select USB_SNP_CORE
default ARCH_BCM_IPROC
help
This adds Platform Device support for Synopsys Designware core
AHB subsystem USB2.0 Device Controller (UDC).
This driver works with UDCs integrated into Broadcom's Northstar2
and Cygnus SoCs.
If unsure, say N.
#
# Controllers available in both integrated and discrete versions
#
config USB_M66592
tristate "Renesas M66592 USB Peripheral Controller"
depends on HAS_IOMEM
help
M66592 is a discrete USB peripheral controller chip that
supports both full and high speed USB 2.0 data transfers.
It has seven configurable endpoints, and endpoint zero.
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "m66592_udc" and force all
gadget drivers to also be dynamically linked.
source "drivers/usb/gadget/udc/bdc/Kconfig"
#
# Controllers available only in discrete form (and all PCI controllers)
#
config USB_AMD5536UDC
tristate "AMD5536 UDC"
depends on USB_PCI
select USB_SNP_CORE
help
The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge.
It is a USB Highspeed DMA capable USB device controller. Beside ep0
it provides 4 IN and 4 OUT endpoints (bulk or interrupt type).
The UDC port supports OTG operation, and may be used as a host port
if it's not being used to implement peripheral or OTG roles.
This UDC is based on Synopsys USB device controller IP and selects
CONFIG_USB_SNP_CORE option to build the core driver.
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "amd5536udc" and force all
gadget drivers to also be dynamically linked.
config USB_FSL_QE
tristate "Freescale QE/CPM USB Device Controller"
depends on FSL_SOC && (QUICC_ENGINE || CPM)
help
Some of Freescale PowerPC processors have a Full Speed
QE/CPM2 USB controller, which support device mode with 4
programmable endpoints. This driver supports the
controller in the MPC8360 and MPC8272, and should work with
controllers having QE or CPM2, given minor tweaks.
Set CONFIG_USB_GADGET to "m" to build this driver as a
dynamically linked module called "fsl_qe_udc".
config USB_NET2272
depends on HAS_IOMEM
tristate "PLX NET2272"
help
PLX NET2272 is a USB peripheral controller which supports
both full and high speed USB 2.0 data transfers.
It has three configurable endpoints, as well as endpoint zero
(for control transfer).
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "net2272" and force all
gadget drivers to also be dynamically linked.
config USB_NET2272_DMA
bool "Support external DMA controller"
depends on USB_NET2272 && HAS_DMA
help
The NET2272 part can optionally support an external DMA
controller, but your board has to have support in the
driver itself.
If unsure, say "N" here. The driver works fine in PIO mode.
config USB_NET2280
tristate "NetChip NET228x / PLX USB3x8x"
depends on USB_PCI
help
NetChip 2280 / 2282 is a PCI based USB peripheral controller which
supports both full and high speed USB 2.0 data transfers.
It has six configurable endpoints, as well as endpoint zero
(for control transfers) and several endpoints with dedicated
functions.
PLX 2380 is a PCIe version of the PLX 2380.
PLX 3380 / 3382 is a PCIe based USB peripheral controller which
supports full, high speed USB 2.0 and super speed USB 3.0
data transfers.
It has eight configurable endpoints, as well as endpoint zero
(for control transfers) and several endpoints with dedicated
functions.
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "net2280" and force all
gadget drivers to also be dynamically linked.
config USB_GOKU
tristate "Toshiba TC86C001 'Goku-S'"
depends on USB_PCI
help
The Toshiba TC86C001 is a PCI device which includes controllers
for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI).
The device controller has three configurable (bulk or interrupt)
endpoints, plus endpoint zero (for control transfers).
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "goku_udc" and to force all
gadget drivers to also be dynamically linked.
config USB_EG20T
tristate "Intel QUARK X1000/EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
depends on USB_PCI
help
This is a USB device driver for EG20T PCH.
EG20T PCH is the platform controller hub that is used in Intel's
general embedded platform. EG20T PCH has USB device interface.
Using this interface, it is able to access system devices connected
to USB device.
This driver enables USB device function.
USB device is a USB peripheral controller which
supports both full and high speed USB 2.0 data transfers.
This driver supports both control transfer and bulk transfer modes.
This driver dose not support interrupt transfer or isochronous
transfer modes.
This driver also can be used for LAPIS Semiconductor's ML7213 which is
for IVI(In-Vehicle Infotainment) use.
ML7831 is for general purpose use.
ML7213/ML7831 is companion chip for Intel Atom E6xx series.
ML7213/ML7831 is completely compatible for Intel EG20T PCH.
This driver can be used with Intel's Quark X1000 SOC platform
config USB_GADGET_XILINX
tristate "Xilinx USB Driver"
depends on HAS_DMA
depends on OF || COMPILE_TEST
help
USB peripheral controller driver for Xilinx USB2 device.
Xilinx USB2 device is a soft IP which supports both full
and high speed USB 2.0 data transfers. It has seven configurable
endpoints(bulk or interrupt or isochronous), as well as
endpoint zero(for control transfers).
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "udc-xilinx" and force all
gadget drivers to also be dynamically linked.
config USB_MAX3420_UDC
tristate "MAX3420 (USB-over-SPI) support"
depends on SPI
help
The Maxim MAX3420 chip supports USB2.0 full-speed peripheral mode.
The MAX3420 is run by SPI interface, and hence the dependency.
To compile this driver as a module, choose M here: the module will
be called max3420_udc
config USB_TEGRA_XUDC
tristate "NVIDIA Tegra Superspeed USB 3.0 Device Controller"
depends on ARCH_TEGRA || COMPILE_TEST
depends on PHY_TEGRA_XUSB
help
Enables NVIDIA Tegra USB 3.0 device mode controller driver.
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "tegra_xudc" and force all
gadget drivers to also be dynamically linked.
source "drivers/usb/gadget/udc/aspeed-vhub/Kconfig"
#
# LAST -- dummy/emulated controller
#
config USB_DUMMY_HCD
tristate "Dummy HCD (DEVELOPMENT)"
depends on USB=y || (USB=m && USB_GADGET=m)
help
This host controller driver emulates USB, looping all data transfer
requests back to a USB "gadget driver" in the same host. The host
side is the controller; the gadget side is the device. Gadget drivers
can be high, full, or low speed; and they have access to endpoints
like those from NET2280, PXA2xx, or SA1100 hardware.
This may help in some stages of creating a driver to embed in a
Linux device, since it lets you debug several parts of the gadget
driver without its hardware or drivers being involved.
Since such a gadget side driver needs to interoperate with a host
side Linux-USB device driver, this may help to debug both sides
of a USB protocol stack.
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "dummy_hcd" and force all
gadget drivers to also be dynamically linked.
# NOTE: Please keep dummy_hcd LAST so that "real hardware" appears
# first and will be selected by default.
endmenu