| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * ASIX AX8817X based USB 2.0 Ethernet Devices |
| * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com> |
| * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net> |
| * Copyright (C) 2006 James Painter <jamie.painter@iname.com> |
| * Copyright (c) 2002-2003 TiVo Inc. |
| */ |
| |
| #include "asix.h" |
| |
| int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, |
| u16 size, void *data, int in_pm) |
| { |
| int ret; |
| int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16); |
| |
| BUG_ON(!dev); |
| |
| if (!in_pm) |
| fn = usbnet_read_cmd; |
| else |
| fn = usbnet_read_cmd_nopm; |
| |
| ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| value, index, data, size); |
| |
| if (unlikely(ret < 0)) |
| netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n", |
| index, ret); |
| |
| return ret; |
| } |
| |
| int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, |
| u16 size, void *data, int in_pm) |
| { |
| int ret; |
| int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16); |
| |
| BUG_ON(!dev); |
| |
| if (!in_pm) |
| fn = usbnet_write_cmd; |
| else |
| fn = usbnet_write_cmd_nopm; |
| |
| ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| value, index, data, size); |
| |
| if (unlikely(ret < 0)) |
| netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n", |
| index, ret); |
| |
| return ret; |
| } |
| |
| void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index, |
| u16 size, void *data) |
| { |
| usbnet_write_cmd_async(dev, cmd, |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| value, index, data, size); |
| } |
| |
| static void reset_asix_rx_fixup_info(struct asix_rx_fixup_info *rx) |
| { |
| /* Reset the variables that have a lifetime outside of |
| * asix_rx_fixup_internal() so that future processing starts from a |
| * known set of initial conditions. |
| */ |
| |
| if (rx->ax_skb) { |
| /* Discard any incomplete Ethernet frame in the netdev buffer */ |
| kfree_skb(rx->ax_skb); |
| rx->ax_skb = NULL; |
| } |
| |
| /* Assume the Data header 32-bit word is at the start of the current |
| * or next URB socket buffer so reset all the state variables. |
| */ |
| rx->remaining = 0; |
| rx->split_head = false; |
| rx->header = 0; |
| } |
| |
| int asix_rx_fixup_internal(struct usbnet *dev, struct sk_buff *skb, |
| struct asix_rx_fixup_info *rx) |
| { |
| int offset = 0; |
| u16 size; |
| |
| /* When an Ethernet frame spans multiple URB socket buffers, |
| * do a sanity test for the Data header synchronisation. |
| * Attempt to detect the situation of the previous socket buffer having |
| * been truncated or a socket buffer was missing. These situations |
| * cause a discontinuity in the data stream and therefore need to avoid |
| * appending bad data to the end of the current netdev socket buffer. |
| * Also avoid unnecessarily discarding a good current netdev socket |
| * buffer. |
| */ |
| if (rx->remaining && (rx->remaining + sizeof(u32) <= skb->len)) { |
| offset = ((rx->remaining + 1) & 0xfffe); |
| rx->header = get_unaligned_le32(skb->data + offset); |
| offset = 0; |
| |
| size = (u16)(rx->header & 0x7ff); |
| if (size != ((~rx->header >> 16) & 0x7ff)) { |
| netdev_err(dev->net, "asix_rx_fixup() Data Header synchronisation was lost, remaining %d\n", |
| rx->remaining); |
| reset_asix_rx_fixup_info(rx); |
| } |
| } |
| |
| while (offset + sizeof(u16) <= skb->len) { |
| u16 copy_length; |
| |
| if (!rx->remaining) { |
| if (skb->len - offset == sizeof(u16)) { |
| rx->header = get_unaligned_le16( |
| skb->data + offset); |
| rx->split_head = true; |
| offset += sizeof(u16); |
| break; |
| } |
| |
| if (rx->split_head == true) { |
| rx->header |= (get_unaligned_le16( |
| skb->data + offset) << 16); |
| rx->split_head = false; |
| offset += sizeof(u16); |
| } else { |
| rx->header = get_unaligned_le32(skb->data + |
| offset); |
| offset += sizeof(u32); |
| } |
| |
| /* take frame length from Data header 32-bit word */ |
| size = (u16)(rx->header & 0x7ff); |
| if (size != ((~rx->header >> 16) & 0x7ff)) { |
| netdev_err(dev->net, "asix_rx_fixup() Bad Header Length 0x%x, offset %d\n", |
| rx->header, offset); |
| reset_asix_rx_fixup_info(rx); |
| return 0; |
| } |
| if (size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) { |
| netdev_dbg(dev->net, "asix_rx_fixup() Bad RX Length %d\n", |
| size); |
| reset_asix_rx_fixup_info(rx); |
| return 0; |
| } |
| |
| /* Sometimes may fail to get a netdev socket buffer but |
| * continue to process the URB socket buffer so that |
| * synchronisation of the Ethernet frame Data header |
| * word is maintained. |
| */ |
| rx->ax_skb = netdev_alloc_skb_ip_align(dev->net, size); |
| |
| rx->remaining = size; |
| } |
| |
| if (rx->remaining > skb->len - offset) { |
| copy_length = skb->len - offset; |
| rx->remaining -= copy_length; |
| } else { |
| copy_length = rx->remaining; |
| rx->remaining = 0; |
| } |
| |
| if (rx->ax_skb) { |
| skb_put_data(rx->ax_skb, skb->data + offset, |
| copy_length); |
| if (!rx->remaining) { |
| usbnet_skb_return(dev, rx->ax_skb); |
| rx->ax_skb = NULL; |
| } |
| } |
| |
| offset += (copy_length + 1) & 0xfffe; |
| } |
| |
| if (skb->len != offset) { |
| netdev_err(dev->net, "asix_rx_fixup() Bad SKB Length %d, %d\n", |
| skb->len, offset); |
| reset_asix_rx_fixup_info(rx); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| int asix_rx_fixup_common(struct usbnet *dev, struct sk_buff *skb) |
| { |
| struct asix_common_private *dp = dev->driver_priv; |
| struct asix_rx_fixup_info *rx = &dp->rx_fixup_info; |
| |
| return asix_rx_fixup_internal(dev, skb, rx); |
| } |
| |
| void asix_rx_fixup_common_free(struct asix_common_private *dp) |
| { |
| struct asix_rx_fixup_info *rx; |
| |
| if (!dp) |
| return; |
| |
| rx = &dp->rx_fixup_info; |
| |
| if (rx->ax_skb) { |
| kfree_skb(rx->ax_skb); |
| rx->ax_skb = NULL; |
| } |
| } |
| |
| struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb, |
| gfp_t flags) |
| { |
| int padlen; |
| int headroom = skb_headroom(skb); |
| int tailroom = skb_tailroom(skb); |
| u32 packet_len; |
| u32 padbytes = 0xffff0000; |
| |
| padlen = ((skb->len + 4) & (dev->maxpacket - 1)) ? 0 : 4; |
| |
| /* We need to push 4 bytes in front of frame (packet_len) |
| * and maybe add 4 bytes after the end (if padlen is 4) |
| * |
| * Avoid skb_copy_expand() expensive call, using following rules : |
| * - We are allowed to push 4 bytes in headroom if skb_header_cloned() |
| * is false (and if we have 4 bytes of headroom) |
| * - We are allowed to put 4 bytes at tail if skb_cloned() |
| * is false (and if we have 4 bytes of tailroom) |
| * |
| * TCP packets for example are cloned, but __skb_header_release() |
| * was called in tcp stack, allowing us to use headroom for our needs. |
| */ |
| if (!skb_header_cloned(skb) && |
| !(padlen && skb_cloned(skb)) && |
| headroom + tailroom >= 4 + padlen) { |
| /* following should not happen, but better be safe */ |
| if (headroom < 4 || |
| tailroom < padlen) { |
| skb->data = memmove(skb->head + 4, skb->data, skb->len); |
| skb_set_tail_pointer(skb, skb->len); |
| } |
| } else { |
| struct sk_buff *skb2; |
| |
| skb2 = skb_copy_expand(skb, 4, padlen, flags); |
| dev_kfree_skb_any(skb); |
| skb = skb2; |
| if (!skb) |
| return NULL; |
| } |
| |
| packet_len = ((skb->len ^ 0x0000ffff) << 16) + skb->len; |
| skb_push(skb, 4); |
| cpu_to_le32s(&packet_len); |
| skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len)); |
| |
| if (padlen) { |
| cpu_to_le32s(&padbytes); |
| memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes)); |
| skb_put(skb, sizeof(padbytes)); |
| } |
| |
| usbnet_set_skb_tx_stats(skb, 1, 0); |
| return skb; |
| } |
| |
| int asix_set_sw_mii(struct usbnet *dev, int in_pm) |
| { |
| int ret; |
| ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL, in_pm); |
| |
| if (ret < 0) |
| netdev_err(dev->net, "Failed to enable software MII access\n"); |
| return ret; |
| } |
| |
| int asix_set_hw_mii(struct usbnet *dev, int in_pm) |
| { |
| int ret; |
| ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL, in_pm); |
| if (ret < 0) |
| netdev_err(dev->net, "Failed to enable hardware MII access\n"); |
| return ret; |
| } |
| |
| int asix_read_phy_addr(struct usbnet *dev, int internal) |
| { |
| int offset = (internal ? 1 : 0); |
| u8 buf[2]; |
| int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf, 0); |
| |
| netdev_dbg(dev->net, "asix_get_phy_addr()\n"); |
| |
| if (ret < 0) { |
| netdev_err(dev->net, "Error reading PHYID register: %02x\n", ret); |
| goto out; |
| } |
| netdev_dbg(dev->net, "asix_get_phy_addr() returning 0x%04x\n", |
| *((__le16 *)buf)); |
| ret = buf[offset]; |
| |
| out: |
| return ret; |
| } |
| |
| int asix_get_phy_addr(struct usbnet *dev) |
| { |
| /* return the address of the internal phy */ |
| return asix_read_phy_addr(dev, 1); |
| } |
| |
| |
| int asix_sw_reset(struct usbnet *dev, u8 flags, int in_pm) |
| { |
| int ret; |
| |
| ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL, in_pm); |
| if (ret < 0) |
| netdev_err(dev->net, "Failed to send software reset: %02x\n", ret); |
| |
| return ret; |
| } |
| |
| u16 asix_read_rx_ctl(struct usbnet *dev, int in_pm) |
| { |
| __le16 v; |
| int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v, in_pm); |
| |
| if (ret < 0) { |
| netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret); |
| goto out; |
| } |
| ret = le16_to_cpu(v); |
| out: |
| return ret; |
| } |
| |
| int asix_write_rx_ctl(struct usbnet *dev, u16 mode, int in_pm) |
| { |
| int ret; |
| |
| netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode); |
| ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL, in_pm); |
| if (ret < 0) |
| netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n", |
| mode, ret); |
| |
| return ret; |
| } |
| |
| u16 asix_read_medium_status(struct usbnet *dev, int in_pm) |
| { |
| __le16 v; |
| int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS, |
| 0, 0, 2, &v, in_pm); |
| |
| if (ret < 0) { |
| netdev_err(dev->net, "Error reading Medium Status register: %02x\n", |
| ret); |
| return ret; /* TODO: callers not checking for error ret */ |
| } |
| |
| return le16_to_cpu(v); |
| |
| } |
| |
| int asix_write_medium_mode(struct usbnet *dev, u16 mode, int in_pm) |
| { |
| int ret; |
| |
| netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode); |
| ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, |
| mode, 0, 0, NULL, in_pm); |
| if (ret < 0) |
| netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n", |
| mode, ret); |
| |
| return ret; |
| } |
| |
| int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm) |
| { |
| int ret; |
| |
| netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value); |
| ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL, in_pm); |
| if (ret < 0) |
| netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n", |
| value, ret); |
| |
| if (sleep) |
| msleep(sleep); |
| |
| return ret; |
| } |
| |
| /* |
| * AX88772 & AX88178 have a 16-bit RX_CTL value |
| */ |
| void asix_set_multicast(struct net_device *net) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| struct asix_data *data = (struct asix_data *)&dev->data; |
| u16 rx_ctl = AX_DEFAULT_RX_CTL; |
| |
| if (net->flags & IFF_PROMISC) { |
| rx_ctl |= AX_RX_CTL_PRO; |
| } else if (net->flags & IFF_ALLMULTI || |
| netdev_mc_count(net) > AX_MAX_MCAST) { |
| rx_ctl |= AX_RX_CTL_AMALL; |
| } else if (netdev_mc_empty(net)) { |
| /* just broadcast and directed */ |
| } else { |
| /* We use the 20 byte dev->data |
| * for our 8 byte filter buffer |
| * to avoid allocating memory that |
| * is tricky to free later */ |
| struct netdev_hw_addr *ha; |
| u32 crc_bits; |
| |
| memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE); |
| |
| /* Build the multicast hash filter. */ |
| netdev_for_each_mc_addr(ha, net) { |
| crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26; |
| data->multi_filter[crc_bits >> 3] |= |
| 1 << (crc_bits & 7); |
| } |
| |
| asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0, |
| AX_MCAST_FILTER_SIZE, data->multi_filter); |
| |
| rx_ctl |= AX_RX_CTL_AM; |
| } |
| |
| asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL); |
| } |
| |
| int asix_mdio_read(struct net_device *netdev, int phy_id, int loc) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| __le16 res; |
| u8 smsr; |
| int i = 0; |
| int ret; |
| |
| mutex_lock(&dev->phy_mutex); |
| do { |
| ret = asix_set_sw_mii(dev, 0); |
| if (ret == -ENODEV || ret == -ETIMEDOUT) |
| break; |
| usleep_range(1000, 1100); |
| ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, |
| 0, 0, 1, &smsr, 0); |
| } while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV)); |
| if (ret == -ENODEV || ret == -ETIMEDOUT) { |
| mutex_unlock(&dev->phy_mutex); |
| return ret; |
| } |
| |
| asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, |
| (__u16)loc, 2, &res, 0); |
| asix_set_hw_mii(dev, 0); |
| mutex_unlock(&dev->phy_mutex); |
| |
| netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", |
| phy_id, loc, le16_to_cpu(res)); |
| |
| return le16_to_cpu(res); |
| } |
| |
| void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| __le16 res = cpu_to_le16(val); |
| u8 smsr; |
| int i = 0; |
| int ret; |
| |
| netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", |
| phy_id, loc, val); |
| |
| mutex_lock(&dev->phy_mutex); |
| do { |
| ret = asix_set_sw_mii(dev, 0); |
| if (ret == -ENODEV) |
| break; |
| usleep_range(1000, 1100); |
| ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, |
| 0, 0, 1, &smsr, 0); |
| } while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV)); |
| if (ret == -ENODEV) { |
| mutex_unlock(&dev->phy_mutex); |
| return; |
| } |
| |
| asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, |
| (__u16)loc, 2, &res, 0); |
| asix_set_hw_mii(dev, 0); |
| mutex_unlock(&dev->phy_mutex); |
| } |
| |
| int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| __le16 res; |
| u8 smsr; |
| int i = 0; |
| int ret; |
| |
| mutex_lock(&dev->phy_mutex); |
| do { |
| ret = asix_set_sw_mii(dev, 1); |
| if (ret == -ENODEV || ret == -ETIMEDOUT) |
| break; |
| usleep_range(1000, 1100); |
| ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, |
| 0, 0, 1, &smsr, 1); |
| } while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV)); |
| if (ret == -ENODEV || ret == -ETIMEDOUT) { |
| mutex_unlock(&dev->phy_mutex); |
| return ret; |
| } |
| |
| asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, |
| (__u16)loc, 2, &res, 1); |
| asix_set_hw_mii(dev, 1); |
| mutex_unlock(&dev->phy_mutex); |
| |
| netdev_dbg(dev->net, "asix_mdio_read_nopm() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", |
| phy_id, loc, le16_to_cpu(res)); |
| |
| return le16_to_cpu(res); |
| } |
| |
| void |
| asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc, int val) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| __le16 res = cpu_to_le16(val); |
| u8 smsr; |
| int i = 0; |
| int ret; |
| |
| netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", |
| phy_id, loc, val); |
| |
| mutex_lock(&dev->phy_mutex); |
| do { |
| ret = asix_set_sw_mii(dev, 1); |
| if (ret == -ENODEV) |
| break; |
| usleep_range(1000, 1100); |
| ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, |
| 0, 0, 1, &smsr, 1); |
| } while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV)); |
| if (ret == -ENODEV) { |
| mutex_unlock(&dev->phy_mutex); |
| return; |
| } |
| |
| asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, |
| (__u16)loc, 2, &res, 1); |
| asix_set_hw_mii(dev, 1); |
| mutex_unlock(&dev->phy_mutex); |
| } |
| |
| void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| u8 opt; |
| |
| if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, |
| 0, 0, 1, &opt, 0) < 0) { |
| wolinfo->supported = 0; |
| wolinfo->wolopts = 0; |
| return; |
| } |
| wolinfo->supported = WAKE_PHY | WAKE_MAGIC; |
| wolinfo->wolopts = 0; |
| if (opt & AX_MONITOR_LINK) |
| wolinfo->wolopts |= WAKE_PHY; |
| if (opt & AX_MONITOR_MAGIC) |
| wolinfo->wolopts |= WAKE_MAGIC; |
| } |
| |
| int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| u8 opt = 0; |
| |
| if (wolinfo->wolopts & ~(WAKE_PHY | WAKE_MAGIC)) |
| return -EINVAL; |
| |
| if (wolinfo->wolopts & WAKE_PHY) |
| opt |= AX_MONITOR_LINK; |
| if (wolinfo->wolopts & WAKE_MAGIC) |
| opt |= AX_MONITOR_MAGIC; |
| |
| if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE, |
| opt, 0, 0, NULL, 0) < 0) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| int asix_get_eeprom_len(struct net_device *net) |
| { |
| return AX_EEPROM_LEN; |
| } |
| |
| int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom, |
| u8 *data) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| u16 *eeprom_buff; |
| int first_word, last_word; |
| int i; |
| |
| if (eeprom->len == 0) |
| return -EINVAL; |
| |
| eeprom->magic = AX_EEPROM_MAGIC; |
| |
| first_word = eeprom->offset >> 1; |
| last_word = (eeprom->offset + eeprom->len - 1) >> 1; |
| |
| eeprom_buff = kmalloc_array(last_word - first_word + 1, sizeof(u16), |
| GFP_KERNEL); |
| if (!eeprom_buff) |
| return -ENOMEM; |
| |
| /* ax8817x returns 2 bytes from eeprom on read */ |
| for (i = first_word; i <= last_word; i++) { |
| if (asix_read_cmd(dev, AX_CMD_READ_EEPROM, i, 0, 2, |
| &eeprom_buff[i - first_word], 0) < 0) { |
| kfree(eeprom_buff); |
| return -EIO; |
| } |
| } |
| |
| memcpy(data, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len); |
| kfree(eeprom_buff); |
| return 0; |
| } |
| |
| int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom, |
| u8 *data) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| u16 *eeprom_buff; |
| int first_word, last_word; |
| int i; |
| int ret; |
| |
| netdev_dbg(net, "write EEPROM len %d, offset %d, magic 0x%x\n", |
| eeprom->len, eeprom->offset, eeprom->magic); |
| |
| if (eeprom->len == 0) |
| return -EINVAL; |
| |
| if (eeprom->magic != AX_EEPROM_MAGIC) |
| return -EINVAL; |
| |
| first_word = eeprom->offset >> 1; |
| last_word = (eeprom->offset + eeprom->len - 1) >> 1; |
| |
| eeprom_buff = kmalloc_array(last_word - first_word + 1, sizeof(u16), |
| GFP_KERNEL); |
| if (!eeprom_buff) |
| return -ENOMEM; |
| |
| /* align data to 16 bit boundaries, read the missing data from |
| the EEPROM */ |
| if (eeprom->offset & 1) { |
| ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, first_word, 0, 2, |
| &eeprom_buff[0], 0); |
| if (ret < 0) { |
| netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", first_word); |
| goto free; |
| } |
| } |
| |
| if ((eeprom->offset + eeprom->len) & 1) { |
| ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, last_word, 0, 2, |
| &eeprom_buff[last_word - first_word], 0); |
| if (ret < 0) { |
| netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", last_word); |
| goto free; |
| } |
| } |
| |
| memcpy((u8 *)eeprom_buff + (eeprom->offset & 1), data, eeprom->len); |
| |
| /* write data to EEPROM */ |
| ret = asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0x0000, 0, 0, NULL, 0); |
| if (ret < 0) { |
| netdev_err(net, "Failed to enable EEPROM write\n"); |
| goto free; |
| } |
| msleep(20); |
| |
| for (i = first_word; i <= last_word; i++) { |
| netdev_dbg(net, "write to EEPROM at offset 0x%02x, data 0x%04x\n", |
| i, eeprom_buff[i - first_word]); |
| ret = asix_write_cmd(dev, AX_CMD_WRITE_EEPROM, i, |
| eeprom_buff[i - first_word], 0, NULL, 0); |
| if (ret < 0) { |
| netdev_err(net, "Failed to write EEPROM at offset 0x%02x.\n", |
| i); |
| goto free; |
| } |
| msleep(20); |
| } |
| |
| ret = asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0x0000, 0, 0, NULL, 0); |
| if (ret < 0) { |
| netdev_err(net, "Failed to disable EEPROM write\n"); |
| goto free; |
| } |
| |
| ret = 0; |
| free: |
| kfree(eeprom_buff); |
| return ret; |
| } |
| |
| void asix_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info) |
| { |
| /* Inherit standard device info */ |
| usbnet_get_drvinfo(net, info); |
| strlcpy(info->driver, DRIVER_NAME, sizeof(info->driver)); |
| strlcpy(info->version, DRIVER_VERSION, sizeof(info->version)); |
| } |
| |
| int asix_set_mac_address(struct net_device *net, void *p) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| struct asix_data *data = (struct asix_data *)&dev->data; |
| struct sockaddr *addr = p; |
| |
| if (netif_running(net)) |
| return -EBUSY; |
| if (!is_valid_ether_addr(addr->sa_data)) |
| return -EADDRNOTAVAIL; |
| |
| memcpy(net->dev_addr, addr->sa_data, ETH_ALEN); |
| |
| /* We use the 20 byte dev->data |
| * for our 6 byte mac buffer |
| * to avoid allocating memory that |
| * is tricky to free later */ |
| memcpy(data->mac_addr, addr->sa_data, ETH_ALEN); |
| asix_write_cmd_async(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, |
| data->mac_addr); |
| |
| return 0; |
| } |