| /* |
| * TI EDMA DMA engine driver |
| * |
| * Copyright 2012 Texas Instruments |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation version 2. |
| * |
| * This program is distributed "as is" WITHOUT ANY WARRANTY of any |
| * kind, whether express or implied; without even the implied warranty |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/dmaengine.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/list.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| |
| #include <mach/edma.h> |
| |
| #include "dmaengine.h" |
| #include "virt-dma.h" |
| |
| /* |
| * This will go away when the private EDMA API is folded |
| * into this driver and the platform device(s) are |
| * instantiated in the arch code. We can only get away |
| * with this simplification because DA8XX may not be built |
| * in the same kernel image with other DaVinci parts. This |
| * avoids having to sprinkle dmaengine driver platform devices |
| * and data throughout all the existing board files. |
| */ |
| #ifdef CONFIG_ARCH_DAVINCI_DA8XX |
| #define EDMA_CTLRS 2 |
| #define EDMA_CHANS 32 |
| #else |
| #define EDMA_CTLRS 1 |
| #define EDMA_CHANS 64 |
| #endif /* CONFIG_ARCH_DAVINCI_DA8XX */ |
| |
| /* Max of 16 segments per channel to conserve PaRAM slots */ |
| #define MAX_NR_SG 16 |
| #define EDMA_MAX_SLOTS MAX_NR_SG |
| #define EDMA_DESCRIPTORS 16 |
| |
| struct edma_desc { |
| struct virt_dma_desc vdesc; |
| struct list_head node; |
| int absync; |
| int pset_nr; |
| struct edmacc_param pset[0]; |
| }; |
| |
| struct edma_cc; |
| |
| struct edma_chan { |
| struct virt_dma_chan vchan; |
| struct list_head node; |
| struct edma_desc *edesc; |
| struct edma_cc *ecc; |
| int ch_num; |
| bool alloced; |
| int slot[EDMA_MAX_SLOTS]; |
| struct dma_slave_config cfg; |
| }; |
| |
| struct edma_cc { |
| int ctlr; |
| struct dma_device dma_slave; |
| struct edma_chan slave_chans[EDMA_CHANS]; |
| int num_slave_chans; |
| int dummy_slot; |
| }; |
| |
| static inline struct edma_cc *to_edma_cc(struct dma_device *d) |
| { |
| return container_of(d, struct edma_cc, dma_slave); |
| } |
| |
| static inline struct edma_chan *to_edma_chan(struct dma_chan *c) |
| { |
| return container_of(c, struct edma_chan, vchan.chan); |
| } |
| |
| static inline struct edma_desc |
| *to_edma_desc(struct dma_async_tx_descriptor *tx) |
| { |
| return container_of(tx, struct edma_desc, vdesc.tx); |
| } |
| |
| static void edma_desc_free(struct virt_dma_desc *vdesc) |
| { |
| kfree(container_of(vdesc, struct edma_desc, vdesc)); |
| } |
| |
| /* Dispatch a queued descriptor to the controller (caller holds lock) */ |
| static void edma_execute(struct edma_chan *echan) |
| { |
| struct virt_dma_desc *vdesc = vchan_next_desc(&echan->vchan); |
| struct edma_desc *edesc; |
| int i; |
| |
| if (!vdesc) { |
| echan->edesc = NULL; |
| return; |
| } |
| |
| list_del(&vdesc->node); |
| |
| echan->edesc = edesc = to_edma_desc(&vdesc->tx); |
| |
| /* Write descriptor PaRAM set(s) */ |
| for (i = 0; i < edesc->pset_nr; i++) { |
| edma_write_slot(echan->slot[i], &edesc->pset[i]); |
| dev_dbg(echan->vchan.chan.device->dev, |
| "\n pset[%d]:\n" |
| " chnum\t%d\n" |
| " slot\t%d\n" |
| " opt\t%08x\n" |
| " src\t%08x\n" |
| " dst\t%08x\n" |
| " abcnt\t%08x\n" |
| " ccnt\t%08x\n" |
| " bidx\t%08x\n" |
| " cidx\t%08x\n" |
| " lkrld\t%08x\n", |
| i, echan->ch_num, echan->slot[i], |
| edesc->pset[i].opt, |
| edesc->pset[i].src, |
| edesc->pset[i].dst, |
| edesc->pset[i].a_b_cnt, |
| edesc->pset[i].ccnt, |
| edesc->pset[i].src_dst_bidx, |
| edesc->pset[i].src_dst_cidx, |
| edesc->pset[i].link_bcntrld); |
| /* Link to the previous slot if not the last set */ |
| if (i != (edesc->pset_nr - 1)) |
| edma_link(echan->slot[i], echan->slot[i+1]); |
| /* Final pset links to the dummy pset */ |
| else |
| edma_link(echan->slot[i], echan->ecc->dummy_slot); |
| } |
| |
| edma_start(echan->ch_num); |
| } |
| |
| static int edma_terminate_all(struct edma_chan *echan) |
| { |
| unsigned long flags; |
| LIST_HEAD(head); |
| |
| spin_lock_irqsave(&echan->vchan.lock, flags); |
| |
| /* |
| * Stop DMA activity: we assume the callback will not be called |
| * after edma_dma() returns (even if it does, it will see |
| * echan->edesc is NULL and exit.) |
| */ |
| if (echan->edesc) { |
| echan->edesc = NULL; |
| edma_stop(echan->ch_num); |
| } |
| |
| vchan_get_all_descriptors(&echan->vchan, &head); |
| spin_unlock_irqrestore(&echan->vchan.lock, flags); |
| vchan_dma_desc_free_list(&echan->vchan, &head); |
| |
| return 0; |
| } |
| |
| static int edma_slave_config(struct edma_chan *echan, |
| struct dma_slave_config *cfg) |
| { |
| if (cfg->src_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES || |
| cfg->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES) |
| return -EINVAL; |
| |
| memcpy(&echan->cfg, cfg, sizeof(echan->cfg)); |
| |
| return 0; |
| } |
| |
| static int edma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, |
| unsigned long arg) |
| { |
| int ret = 0; |
| struct dma_slave_config *config; |
| struct edma_chan *echan = to_edma_chan(chan); |
| |
| switch (cmd) { |
| case DMA_TERMINATE_ALL: |
| edma_terminate_all(echan); |
| break; |
| case DMA_SLAVE_CONFIG: |
| config = (struct dma_slave_config *)arg; |
| ret = edma_slave_config(echan, config); |
| break; |
| default: |
| ret = -ENOSYS; |
| } |
| |
| return ret; |
| } |
| |
| static struct dma_async_tx_descriptor *edma_prep_slave_sg( |
| struct dma_chan *chan, struct scatterlist *sgl, |
| unsigned int sg_len, enum dma_transfer_direction direction, |
| unsigned long tx_flags, void *context) |
| { |
| struct edma_chan *echan = to_edma_chan(chan); |
| struct device *dev = chan->device->dev; |
| struct edma_desc *edesc; |
| dma_addr_t dev_addr; |
| enum dma_slave_buswidth dev_width; |
| u32 burst; |
| struct scatterlist *sg; |
| int i; |
| int acnt, bcnt, ccnt, src, dst, cidx; |
| int src_bidx, dst_bidx, src_cidx, dst_cidx; |
| |
| if (unlikely(!echan || !sgl || !sg_len)) |
| return NULL; |
| |
| if (direction == DMA_DEV_TO_MEM) { |
| dev_addr = echan->cfg.src_addr; |
| dev_width = echan->cfg.src_addr_width; |
| burst = echan->cfg.src_maxburst; |
| } else if (direction == DMA_MEM_TO_DEV) { |
| dev_addr = echan->cfg.dst_addr; |
| dev_width = echan->cfg.dst_addr_width; |
| burst = echan->cfg.dst_maxburst; |
| } else { |
| dev_err(dev, "%s: bad direction?\n", __func__); |
| return NULL; |
| } |
| |
| if (dev_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) { |
| dev_err(dev, "Undefined slave buswidth\n"); |
| return NULL; |
| } |
| |
| if (sg_len > MAX_NR_SG) { |
| dev_err(dev, "Exceeded max SG segments %d > %d\n", |
| sg_len, MAX_NR_SG); |
| return NULL; |
| } |
| |
| edesc = kzalloc(sizeof(*edesc) + sg_len * |
| sizeof(edesc->pset[0]), GFP_ATOMIC); |
| if (!edesc) { |
| dev_dbg(dev, "Failed to allocate a descriptor\n"); |
| return NULL; |
| } |
| |
| edesc->pset_nr = sg_len; |
| |
| for_each_sg(sgl, sg, sg_len, i) { |
| /* Allocate a PaRAM slot, if needed */ |
| if (echan->slot[i] < 0) { |
| echan->slot[i] = |
| edma_alloc_slot(EDMA_CTLR(echan->ch_num), |
| EDMA_SLOT_ANY); |
| if (echan->slot[i] < 0) { |
| dev_err(dev, "Failed to allocate slot\n"); |
| return NULL; |
| } |
| } |
| |
| acnt = dev_width; |
| |
| /* |
| * If the maxburst is equal to the fifo width, use |
| * A-synced transfers. This allows for large contiguous |
| * buffer transfers using only one PaRAM set. |
| */ |
| if (burst == 1) { |
| edesc->absync = false; |
| ccnt = sg_dma_len(sg) / acnt / (SZ_64K - 1); |
| bcnt = sg_dma_len(sg) / acnt - ccnt * (SZ_64K - 1); |
| if (bcnt) |
| ccnt++; |
| else |
| bcnt = SZ_64K - 1; |
| cidx = acnt; |
| /* |
| * If maxburst is greater than the fifo address_width, |
| * use AB-synced transfers where A count is the fifo |
| * address_width and B count is the maxburst. In this |
| * case, we are limited to transfers of C count frames |
| * of (address_width * maxburst) where C count is limited |
| * to SZ_64K-1. This places an upper bound on the length |
| * of an SG segment that can be handled. |
| */ |
| } else { |
| edesc->absync = true; |
| bcnt = burst; |
| ccnt = sg_dma_len(sg) / (acnt * bcnt); |
| if (ccnt > (SZ_64K - 1)) { |
| dev_err(dev, "Exceeded max SG segment size\n"); |
| return NULL; |
| } |
| cidx = acnt * bcnt; |
| } |
| |
| if (direction == DMA_MEM_TO_DEV) { |
| src = sg_dma_address(sg); |
| dst = dev_addr; |
| src_bidx = acnt; |
| src_cidx = cidx; |
| dst_bidx = 0; |
| dst_cidx = 0; |
| } else { |
| src = dev_addr; |
| dst = sg_dma_address(sg); |
| src_bidx = 0; |
| src_cidx = 0; |
| dst_bidx = acnt; |
| dst_cidx = cidx; |
| } |
| |
| edesc->pset[i].opt = EDMA_TCC(EDMA_CHAN_SLOT(echan->ch_num)); |
| /* Configure A or AB synchronized transfers */ |
| if (edesc->absync) |
| edesc->pset[i].opt |= SYNCDIM; |
| /* If this is the last set, enable completion interrupt flag */ |
| if (i == sg_len - 1) |
| edesc->pset[i].opt |= TCINTEN; |
| |
| edesc->pset[i].src = src; |
| edesc->pset[i].dst = dst; |
| |
| edesc->pset[i].src_dst_bidx = (dst_bidx << 16) | src_bidx; |
| edesc->pset[i].src_dst_cidx = (dst_cidx << 16) | src_cidx; |
| |
| edesc->pset[i].a_b_cnt = bcnt << 16 | acnt; |
| edesc->pset[i].ccnt = ccnt; |
| edesc->pset[i].link_bcntrld = 0xffffffff; |
| |
| } |
| |
| return vchan_tx_prep(&echan->vchan, &edesc->vdesc, tx_flags); |
| } |
| |
| static void edma_callback(unsigned ch_num, u16 ch_status, void *data) |
| { |
| struct edma_chan *echan = data; |
| struct device *dev = echan->vchan.chan.device->dev; |
| struct edma_desc *edesc; |
| unsigned long flags; |
| |
| /* Stop the channel */ |
| edma_stop(echan->ch_num); |
| |
| switch (ch_status) { |
| case DMA_COMPLETE: |
| dev_dbg(dev, "transfer complete on channel %d\n", ch_num); |
| |
| spin_lock_irqsave(&echan->vchan.lock, flags); |
| |
| edesc = echan->edesc; |
| if (edesc) { |
| edma_execute(echan); |
| vchan_cookie_complete(&edesc->vdesc); |
| } |
| |
| spin_unlock_irqrestore(&echan->vchan.lock, flags); |
| |
| break; |
| case DMA_CC_ERROR: |
| dev_dbg(dev, "transfer error on channel %d\n", ch_num); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| /* Alloc channel resources */ |
| static int edma_alloc_chan_resources(struct dma_chan *chan) |
| { |
| struct edma_chan *echan = to_edma_chan(chan); |
| struct device *dev = chan->device->dev; |
| int ret; |
| int a_ch_num; |
| LIST_HEAD(descs); |
| |
| a_ch_num = edma_alloc_channel(echan->ch_num, edma_callback, |
| chan, EVENTQ_DEFAULT); |
| |
| if (a_ch_num < 0) { |
| ret = -ENODEV; |
| goto err_no_chan; |
| } |
| |
| if (a_ch_num != echan->ch_num) { |
| dev_err(dev, "failed to allocate requested channel %u:%u\n", |
| EDMA_CTLR(echan->ch_num), |
| EDMA_CHAN_SLOT(echan->ch_num)); |
| ret = -ENODEV; |
| goto err_wrong_chan; |
| } |
| |
| echan->alloced = true; |
| echan->slot[0] = echan->ch_num; |
| |
| dev_info(dev, "allocated channel for %u:%u\n", |
| EDMA_CTLR(echan->ch_num), EDMA_CHAN_SLOT(echan->ch_num)); |
| |
| return 0; |
| |
| err_wrong_chan: |
| edma_free_channel(a_ch_num); |
| err_no_chan: |
| return ret; |
| } |
| |
| /* Free channel resources */ |
| static void edma_free_chan_resources(struct dma_chan *chan) |
| { |
| struct edma_chan *echan = to_edma_chan(chan); |
| struct device *dev = chan->device->dev; |
| int i; |
| |
| /* Terminate transfers */ |
| edma_stop(echan->ch_num); |
| |
| vchan_free_chan_resources(&echan->vchan); |
| |
| /* Free EDMA PaRAM slots */ |
| for (i = 1; i < EDMA_MAX_SLOTS; i++) { |
| if (echan->slot[i] >= 0) { |
| edma_free_slot(echan->slot[i]); |
| echan->slot[i] = -1; |
| } |
| } |
| |
| /* Free EDMA channel */ |
| if (echan->alloced) { |
| edma_free_channel(echan->ch_num); |
| echan->alloced = false; |
| } |
| |
| dev_info(dev, "freeing channel for %u\n", echan->ch_num); |
| } |
| |
| /* Send pending descriptor to hardware */ |
| static void edma_issue_pending(struct dma_chan *chan) |
| { |
| struct edma_chan *echan = to_edma_chan(chan); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&echan->vchan.lock, flags); |
| if (vchan_issue_pending(&echan->vchan) && !echan->edesc) |
| edma_execute(echan); |
| spin_unlock_irqrestore(&echan->vchan.lock, flags); |
| } |
| |
| static size_t edma_desc_size(struct edma_desc *edesc) |
| { |
| int i; |
| size_t size; |
| |
| if (edesc->absync) |
| for (size = i = 0; i < edesc->pset_nr; i++) |
| size += (edesc->pset[i].a_b_cnt & 0xffff) * |
| (edesc->pset[i].a_b_cnt >> 16) * |
| edesc->pset[i].ccnt; |
| else |
| size = (edesc->pset[0].a_b_cnt & 0xffff) * |
| (edesc->pset[0].a_b_cnt >> 16) + |
| (edesc->pset[0].a_b_cnt & 0xffff) * |
| (SZ_64K - 1) * edesc->pset[0].ccnt; |
| |
| return size; |
| } |
| |
| /* Check request completion status */ |
| static enum dma_status edma_tx_status(struct dma_chan *chan, |
| dma_cookie_t cookie, |
| struct dma_tx_state *txstate) |
| { |
| struct edma_chan *echan = to_edma_chan(chan); |
| struct virt_dma_desc *vdesc; |
| enum dma_status ret; |
| unsigned long flags; |
| |
| ret = dma_cookie_status(chan, cookie, txstate); |
| if (ret == DMA_SUCCESS || !txstate) |
| return ret; |
| |
| spin_lock_irqsave(&echan->vchan.lock, flags); |
| vdesc = vchan_find_desc(&echan->vchan, cookie); |
| if (vdesc) { |
| txstate->residue = edma_desc_size(to_edma_desc(&vdesc->tx)); |
| } else if (echan->edesc && echan->edesc->vdesc.tx.cookie == cookie) { |
| struct edma_desc *edesc = echan->edesc; |
| txstate->residue = edma_desc_size(edesc); |
| } else { |
| txstate->residue = 0; |
| } |
| spin_unlock_irqrestore(&echan->vchan.lock, flags); |
| |
| return ret; |
| } |
| |
| static void __init edma_chan_init(struct edma_cc *ecc, |
| struct dma_device *dma, |
| struct edma_chan *echans) |
| { |
| int i, j; |
| |
| for (i = 0; i < EDMA_CHANS; i++) { |
| struct edma_chan *echan = &echans[i]; |
| echan->ch_num = EDMA_CTLR_CHAN(ecc->ctlr, i); |
| echan->ecc = ecc; |
| echan->vchan.desc_free = edma_desc_free; |
| |
| vchan_init(&echan->vchan, dma); |
| |
| INIT_LIST_HEAD(&echan->node); |
| for (j = 0; j < EDMA_MAX_SLOTS; j++) |
| echan->slot[j] = -1; |
| } |
| } |
| |
| static void edma_dma_init(struct edma_cc *ecc, struct dma_device *dma, |
| struct device *dev) |
| { |
| dma->device_prep_slave_sg = edma_prep_slave_sg; |
| dma->device_alloc_chan_resources = edma_alloc_chan_resources; |
| dma->device_free_chan_resources = edma_free_chan_resources; |
| dma->device_issue_pending = edma_issue_pending; |
| dma->device_tx_status = edma_tx_status; |
| dma->device_control = edma_control; |
| dma->dev = dev; |
| |
| INIT_LIST_HEAD(&dma->channels); |
| } |
| |
| static int edma_probe(struct platform_device *pdev) |
| { |
| struct edma_cc *ecc; |
| int ret; |
| |
| ecc = devm_kzalloc(&pdev->dev, sizeof(*ecc), GFP_KERNEL); |
| if (!ecc) { |
| dev_err(&pdev->dev, "Can't allocate controller\n"); |
| return -ENOMEM; |
| } |
| |
| ecc->ctlr = pdev->id; |
| ecc->dummy_slot = edma_alloc_slot(ecc->ctlr, EDMA_SLOT_ANY); |
| if (ecc->dummy_slot < 0) { |
| dev_err(&pdev->dev, "Can't allocate PaRAM dummy slot\n"); |
| return -EIO; |
| } |
| |
| dma_cap_zero(ecc->dma_slave.cap_mask); |
| dma_cap_set(DMA_SLAVE, ecc->dma_slave.cap_mask); |
| |
| edma_dma_init(ecc, &ecc->dma_slave, &pdev->dev); |
| |
| edma_chan_init(ecc, &ecc->dma_slave, ecc->slave_chans); |
| |
| ret = dma_async_device_register(&ecc->dma_slave); |
| if (ret) |
| goto err_reg1; |
| |
| platform_set_drvdata(pdev, ecc); |
| |
| dev_info(&pdev->dev, "TI EDMA DMA engine driver\n"); |
| |
| return 0; |
| |
| err_reg1: |
| edma_free_slot(ecc->dummy_slot); |
| return ret; |
| } |
| |
| static int __devexit edma_remove(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct edma_cc *ecc = dev_get_drvdata(dev); |
| |
| dma_async_device_unregister(&ecc->dma_slave); |
| edma_free_slot(ecc->dummy_slot); |
| |
| return 0; |
| } |
| |
| static struct platform_driver edma_driver = { |
| .probe = edma_probe, |
| .remove = edma_remove, |
| .driver = { |
| .name = "edma-dma-engine", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| bool edma_filter_fn(struct dma_chan *chan, void *param) |
| { |
| if (chan->device->dev->driver == &edma_driver.driver) { |
| struct edma_chan *echan = to_edma_chan(chan); |
| unsigned ch_req = *(unsigned *)param; |
| return ch_req == echan->ch_num; |
| } |
| return false; |
| } |
| EXPORT_SYMBOL(edma_filter_fn); |
| |
| static struct platform_device *pdev0, *pdev1; |
| |
| static const struct platform_device_info edma_dev_info0 = { |
| .name = "edma-dma-engine", |
| .id = 0, |
| .dma_mask = DMA_BIT_MASK(32), |
| }; |
| |
| static const struct platform_device_info edma_dev_info1 = { |
| .name = "edma-dma-engine", |
| .id = 1, |
| .dma_mask = DMA_BIT_MASK(32), |
| }; |
| |
| static int edma_init(void) |
| { |
| int ret = platform_driver_register(&edma_driver); |
| |
| if (ret == 0) { |
| pdev0 = platform_device_register_full(&edma_dev_info0); |
| if (IS_ERR(pdev0)) { |
| platform_driver_unregister(&edma_driver); |
| ret = PTR_ERR(pdev0); |
| goto out; |
| } |
| } |
| |
| if (EDMA_CTLRS == 2) { |
| pdev1 = platform_device_register_full(&edma_dev_info1); |
| if (IS_ERR(pdev1)) { |
| platform_driver_unregister(&edma_driver); |
| platform_device_unregister(pdev0); |
| ret = PTR_ERR(pdev1); |
| } |
| } |
| |
| out: |
| return ret; |
| } |
| subsys_initcall(edma_init); |
| |
| static void __exit edma_exit(void) |
| { |
| platform_device_unregister(pdev0); |
| if (pdev1) |
| platform_device_unregister(pdev1); |
| platform_driver_unregister(&edma_driver); |
| } |
| module_exit(edma_exit); |
| |
| MODULE_AUTHOR("Matt Porter <mporter@ti.com>"); |
| MODULE_DESCRIPTION("TI EDMA DMA engine driver"); |
| MODULE_LICENSE("GPL v2"); |