| /* |
| * QUICC Engine GPIOs |
| * |
| * Copyright (c) MontaVista Software, Inc. 2008. |
| * |
| * Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/spinlock.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| #include <linux/of_gpio.h> |
| #include <linux/gpio/driver.h> |
| /* FIXME: needed for gpio_to_chip() get rid of this */ |
| #include <linux/gpio.h> |
| #include <linux/slab.h> |
| #include <linux/export.h> |
| #include <soc/fsl/qe/qe.h> |
| |
| struct qe_gpio_chip { |
| struct of_mm_gpio_chip mm_gc; |
| spinlock_t lock; |
| |
| unsigned long pin_flags[QE_PIO_PINS]; |
| #define QE_PIN_REQUESTED 0 |
| |
| /* shadowed data register to clear/set bits safely */ |
| u32 cpdata; |
| |
| /* saved_regs used to restore dedicated functions */ |
| struct qe_pio_regs saved_regs; |
| }; |
| |
| static void qe_gpio_save_regs(struct of_mm_gpio_chip *mm_gc) |
| { |
| struct qe_gpio_chip *qe_gc = |
| container_of(mm_gc, struct qe_gpio_chip, mm_gc); |
| struct qe_pio_regs __iomem *regs = mm_gc->regs; |
| |
| qe_gc->cpdata = in_be32(®s->cpdata); |
| qe_gc->saved_regs.cpdata = qe_gc->cpdata; |
| qe_gc->saved_regs.cpdir1 = in_be32(®s->cpdir1); |
| qe_gc->saved_regs.cpdir2 = in_be32(®s->cpdir2); |
| qe_gc->saved_regs.cppar1 = in_be32(®s->cppar1); |
| qe_gc->saved_regs.cppar2 = in_be32(®s->cppar2); |
| qe_gc->saved_regs.cpodr = in_be32(®s->cpodr); |
| } |
| |
| static int qe_gpio_get(struct gpio_chip *gc, unsigned int gpio) |
| { |
| struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); |
| struct qe_pio_regs __iomem *regs = mm_gc->regs; |
| u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio); |
| |
| return !!(in_be32(®s->cpdata) & pin_mask); |
| } |
| |
| static void qe_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) |
| { |
| struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); |
| struct qe_gpio_chip *qe_gc = gpiochip_get_data(gc); |
| struct qe_pio_regs __iomem *regs = mm_gc->regs; |
| unsigned long flags; |
| u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio); |
| |
| spin_lock_irqsave(&qe_gc->lock, flags); |
| |
| if (val) |
| qe_gc->cpdata |= pin_mask; |
| else |
| qe_gc->cpdata &= ~pin_mask; |
| |
| out_be32(®s->cpdata, qe_gc->cpdata); |
| |
| spin_unlock_irqrestore(&qe_gc->lock, flags); |
| } |
| |
| static void qe_gpio_set_multiple(struct gpio_chip *gc, |
| unsigned long *mask, unsigned long *bits) |
| { |
| struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); |
| struct qe_gpio_chip *qe_gc = gpiochip_get_data(gc); |
| struct qe_pio_regs __iomem *regs = mm_gc->regs; |
| unsigned long flags; |
| int i; |
| |
| spin_lock_irqsave(&qe_gc->lock, flags); |
| |
| for (i = 0; i < gc->ngpio; i++) { |
| if (*mask == 0) |
| break; |
| if (__test_and_clear_bit(i, mask)) { |
| if (test_bit(i, bits)) |
| qe_gc->cpdata |= (1U << (QE_PIO_PINS - 1 - i)); |
| else |
| qe_gc->cpdata &= ~(1U << (QE_PIO_PINS - 1 - i)); |
| } |
| } |
| |
| out_be32(®s->cpdata, qe_gc->cpdata); |
| |
| spin_unlock_irqrestore(&qe_gc->lock, flags); |
| } |
| |
| static int qe_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) |
| { |
| struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); |
| struct qe_gpio_chip *qe_gc = gpiochip_get_data(gc); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&qe_gc->lock, flags); |
| |
| __par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_IN, 0, 0, 0); |
| |
| spin_unlock_irqrestore(&qe_gc->lock, flags); |
| |
| return 0; |
| } |
| |
| static int qe_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) |
| { |
| struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); |
| struct qe_gpio_chip *qe_gc = gpiochip_get_data(gc); |
| unsigned long flags; |
| |
| qe_gpio_set(gc, gpio, val); |
| |
| spin_lock_irqsave(&qe_gc->lock, flags); |
| |
| __par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_OUT, 0, 0, 0); |
| |
| spin_unlock_irqrestore(&qe_gc->lock, flags); |
| |
| return 0; |
| } |
| |
| struct qe_pin { |
| /* |
| * The qe_gpio_chip name is unfortunate, we should change that to |
| * something like qe_pio_controller. Someday. |
| */ |
| struct qe_gpio_chip *controller; |
| int num; |
| }; |
| |
| /** |
| * qe_pin_request - Request a QE pin |
| * @np: device node to get a pin from |
| * @index: index of a pin in the device tree |
| * Context: non-atomic |
| * |
| * This function return qe_pin so that you could use it with the rest of |
| * the QE Pin Multiplexing API. |
| */ |
| struct qe_pin *qe_pin_request(struct device_node *np, int index) |
| { |
| struct qe_pin *qe_pin; |
| struct gpio_chip *gc; |
| struct of_mm_gpio_chip *mm_gc; |
| struct qe_gpio_chip *qe_gc; |
| int err; |
| unsigned long flags; |
| |
| qe_pin = kzalloc(sizeof(*qe_pin), GFP_KERNEL); |
| if (!qe_pin) { |
| pr_debug("%s: can't allocate memory\n", __func__); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| err = of_get_gpio(np, index); |
| if (err < 0) |
| goto err0; |
| gc = gpio_to_chip(err); |
| if (WARN_ON(!gc)) |
| goto err0; |
| |
| if (!of_device_is_compatible(gc->of_node, "fsl,mpc8323-qe-pario-bank")) { |
| pr_debug("%s: tried to get a non-qe pin\n", __func__); |
| err = -EINVAL; |
| goto err0; |
| } |
| |
| mm_gc = to_of_mm_gpio_chip(gc); |
| qe_gc = gpiochip_get_data(gc); |
| |
| spin_lock_irqsave(&qe_gc->lock, flags); |
| |
| err -= gc->base; |
| if (test_and_set_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[err]) == 0) { |
| qe_pin->controller = qe_gc; |
| qe_pin->num = err; |
| err = 0; |
| } else { |
| err = -EBUSY; |
| } |
| |
| spin_unlock_irqrestore(&qe_gc->lock, flags); |
| |
| if (!err) |
| return qe_pin; |
| err0: |
| kfree(qe_pin); |
| pr_debug("%s failed with status %d\n", __func__, err); |
| return ERR_PTR(err); |
| } |
| EXPORT_SYMBOL(qe_pin_request); |
| |
| /** |
| * qe_pin_free - Free a pin |
| * @qe_pin: pointer to the qe_pin structure |
| * Context: any |
| * |
| * This function frees the qe_pin structure and makes a pin available |
| * for further qe_pin_request() calls. |
| */ |
| void qe_pin_free(struct qe_pin *qe_pin) |
| { |
| struct qe_gpio_chip *qe_gc = qe_pin->controller; |
| unsigned long flags; |
| const int pin = qe_pin->num; |
| |
| spin_lock_irqsave(&qe_gc->lock, flags); |
| test_and_clear_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[pin]); |
| spin_unlock_irqrestore(&qe_gc->lock, flags); |
| |
| kfree(qe_pin); |
| } |
| EXPORT_SYMBOL(qe_pin_free); |
| |
| /** |
| * qe_pin_set_dedicated - Revert a pin to a dedicated peripheral function mode |
| * @qe_pin: pointer to the qe_pin structure |
| * Context: any |
| * |
| * This function resets a pin to a dedicated peripheral function that |
| * has been set up by the firmware. |
| */ |
| void qe_pin_set_dedicated(struct qe_pin *qe_pin) |
| { |
| struct qe_gpio_chip *qe_gc = qe_pin->controller; |
| struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs; |
| struct qe_pio_regs *sregs = &qe_gc->saved_regs; |
| int pin = qe_pin->num; |
| u32 mask1 = 1 << (QE_PIO_PINS - (pin + 1)); |
| u32 mask2 = 0x3 << (QE_PIO_PINS - (pin % (QE_PIO_PINS / 2) + 1) * 2); |
| bool second_reg = pin > (QE_PIO_PINS / 2) - 1; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&qe_gc->lock, flags); |
| |
| if (second_reg) { |
| clrsetbits_be32(®s->cpdir2, mask2, sregs->cpdir2 & mask2); |
| clrsetbits_be32(®s->cppar2, mask2, sregs->cppar2 & mask2); |
| } else { |
| clrsetbits_be32(®s->cpdir1, mask2, sregs->cpdir1 & mask2); |
| clrsetbits_be32(®s->cppar1, mask2, sregs->cppar1 & mask2); |
| } |
| |
| if (sregs->cpdata & mask1) |
| qe_gc->cpdata |= mask1; |
| else |
| qe_gc->cpdata &= ~mask1; |
| |
| out_be32(®s->cpdata, qe_gc->cpdata); |
| clrsetbits_be32(®s->cpodr, mask1, sregs->cpodr & mask1); |
| |
| spin_unlock_irqrestore(&qe_gc->lock, flags); |
| } |
| EXPORT_SYMBOL(qe_pin_set_dedicated); |
| |
| /** |
| * qe_pin_set_gpio - Set a pin to the GPIO mode |
| * @qe_pin: pointer to the qe_pin structure |
| * Context: any |
| * |
| * This function sets a pin to the GPIO mode. |
| */ |
| void qe_pin_set_gpio(struct qe_pin *qe_pin) |
| { |
| struct qe_gpio_chip *qe_gc = qe_pin->controller; |
| struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&qe_gc->lock, flags); |
| |
| /* Let's make it input by default, GPIO API is able to change that. */ |
| __par_io_config_pin(regs, qe_pin->num, QE_PIO_DIR_IN, 0, 0, 0); |
| |
| spin_unlock_irqrestore(&qe_gc->lock, flags); |
| } |
| EXPORT_SYMBOL(qe_pin_set_gpio); |
| |
| static int __init qe_add_gpiochips(void) |
| { |
| struct device_node *np; |
| |
| for_each_compatible_node(np, NULL, "fsl,mpc8323-qe-pario-bank") { |
| int ret; |
| struct qe_gpio_chip *qe_gc; |
| struct of_mm_gpio_chip *mm_gc; |
| struct gpio_chip *gc; |
| |
| qe_gc = kzalloc(sizeof(*qe_gc), GFP_KERNEL); |
| if (!qe_gc) { |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| spin_lock_init(&qe_gc->lock); |
| |
| mm_gc = &qe_gc->mm_gc; |
| gc = &mm_gc->gc; |
| |
| mm_gc->save_regs = qe_gpio_save_regs; |
| gc->ngpio = QE_PIO_PINS; |
| gc->direction_input = qe_gpio_dir_in; |
| gc->direction_output = qe_gpio_dir_out; |
| gc->get = qe_gpio_get; |
| gc->set = qe_gpio_set; |
| gc->set_multiple = qe_gpio_set_multiple; |
| |
| ret = of_mm_gpiochip_add_data(np, mm_gc, qe_gc); |
| if (ret) |
| goto err; |
| continue; |
| err: |
| pr_err("%pOF: registration failed with status %d\n", |
| np, ret); |
| kfree(qe_gc); |
| /* try others anyway */ |
| } |
| return 0; |
| } |
| arch_initcall(qe_add_gpiochips); |