| /* |
| * arch/arm/mach-orion5x/addr-map.c |
| * |
| * Address map functions for Marvell Orion 5x SoCs |
| * |
| * Maintainer: Tzachi Perelstein <tzachi@marvell.com> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/mbus.h> |
| #include <asm/hardware.h> |
| #include <asm/io.h> |
| #include "common.h" |
| |
| /* |
| * The Orion has fully programable address map. There's a separate address |
| * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIe, USB, |
| * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own |
| * address decode windows that allow it to access any of the Orion resources. |
| * |
| * CPU address decoding -- |
| * Linux assumes that it is the boot loader that already setup the access to |
| * DDR and internal registers. |
| * Setup access to PCI and PCIe IO/MEM space is issued by this file. |
| * Setup access to various devices located on the device bus interface (e.g. |
| * flashes, RTC, etc) should be issued by machine-setup.c according to |
| * specific board population (by using orion5x_setup_*_win()). |
| * |
| * Non-CPU Masters address decoding -- |
| * Unlike the CPU, we setup the access from Orion's master interfaces to DDR |
| * banks only (the typical use case). |
| * Setup access for each master to DDR is issued by platform device setup. |
| */ |
| |
| /* |
| * Generic Address Decode Windows bit settings |
| */ |
| #define TARGET_DDR 0 |
| #define TARGET_DEV_BUS 1 |
| #define TARGET_PCI 3 |
| #define TARGET_PCIE 4 |
| #define ATTR_PCIE_MEM 0x59 |
| #define ATTR_PCIE_IO 0x51 |
| #define ATTR_PCIE_WA 0x79 |
| #define ATTR_PCI_MEM 0x59 |
| #define ATTR_PCI_IO 0x51 |
| #define ATTR_DEV_CS0 0x1e |
| #define ATTR_DEV_CS1 0x1d |
| #define ATTR_DEV_CS2 0x1b |
| #define ATTR_DEV_BOOT 0xf |
| |
| /* |
| * Helpers to get DDR bank info |
| */ |
| #define DDR_BASE_CS(n) ORION5X_DDR_REG(0x1500 + ((n) << 3)) |
| #define DDR_SIZE_CS(n) ORION5X_DDR_REG(0x1504 + ((n) << 3)) |
| |
| /* |
| * CPU Address Decode Windows registers |
| */ |
| #define CPU_WIN_CTRL(n) ORION5X_BRIDGE_REG(0x000 | ((n) << 4)) |
| #define CPU_WIN_BASE(n) ORION5X_BRIDGE_REG(0x004 | ((n) << 4)) |
| #define CPU_WIN_REMAP_LO(n) ORION5X_BRIDGE_REG(0x008 | ((n) << 4)) |
| #define CPU_WIN_REMAP_HI(n) ORION5X_BRIDGE_REG(0x00c | ((n) << 4)) |
| |
| |
| struct mbus_dram_target_info orion5x_mbus_dram_info; |
| |
| static int __init orion5x_cpu_win_can_remap(int win) |
| { |
| u32 dev, rev; |
| |
| orion5x_pcie_id(&dev, &rev); |
| if ((dev == MV88F5281_DEV_ID && win < 4) |
| || (dev == MV88F5182_DEV_ID && win < 2) |
| || (dev == MV88F5181_DEV_ID && win < 2)) |
| return 1; |
| |
| return 0; |
| } |
| |
| static void __init setup_cpu_win(int win, u32 base, u32 size, |
| u8 target, u8 attr, int remap) |
| { |
| orion5x_write(CPU_WIN_BASE(win), base & 0xffff0000); |
| orion5x_write(CPU_WIN_CTRL(win), |
| ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1); |
| |
| if (orion5x_cpu_win_can_remap(win)) { |
| if (remap < 0) |
| remap = base; |
| |
| orion5x_write(CPU_WIN_REMAP_LO(win), remap & 0xffff0000); |
| orion5x_write(CPU_WIN_REMAP_HI(win), 0); |
| } |
| } |
| |
| void __init orion5x_setup_cpu_mbus_bridge(void) |
| { |
| int i; |
| int cs; |
| |
| /* |
| * First, disable and clear windows. |
| */ |
| for (i = 0; i < 8; i++) { |
| orion5x_write(CPU_WIN_BASE(i), 0); |
| orion5x_write(CPU_WIN_CTRL(i), 0); |
| if (orion5x_cpu_win_can_remap(i)) { |
| orion5x_write(CPU_WIN_REMAP_LO(i), 0); |
| orion5x_write(CPU_WIN_REMAP_HI(i), 0); |
| } |
| } |
| |
| /* |
| * Setup windows for PCI+PCIe IO+MEM space. |
| */ |
| setup_cpu_win(0, ORION5X_PCIE_IO_PHYS_BASE, ORION5X_PCIE_IO_SIZE, |
| TARGET_PCIE, ATTR_PCIE_IO, ORION5X_PCIE_IO_BUS_BASE); |
| setup_cpu_win(1, ORION5X_PCI_IO_PHYS_BASE, ORION5X_PCI_IO_SIZE, |
| TARGET_PCI, ATTR_PCI_IO, ORION5X_PCI_IO_BUS_BASE); |
| setup_cpu_win(2, ORION5X_PCIE_MEM_PHYS_BASE, ORION5X_PCIE_MEM_SIZE, |
| TARGET_PCIE, ATTR_PCIE_MEM, -1); |
| setup_cpu_win(3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE, |
| TARGET_PCI, ATTR_PCI_MEM, -1); |
| |
| /* |
| * Setup MBUS dram target info. |
| */ |
| orion5x_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; |
| |
| for (i = 0, cs = 0; i < 4; i++) { |
| u32 base = readl(DDR_BASE_CS(i)); |
| u32 size = readl(DDR_SIZE_CS(i)); |
| |
| /* |
| * Chip select enabled? |
| */ |
| if (size & 1) { |
| struct mbus_dram_window *w; |
| |
| w = &orion5x_mbus_dram_info.cs[cs++]; |
| w->cs_index = i; |
| w->mbus_attr = 0xf & ~(1 << i); |
| w->base = base & 0xff000000; |
| w->size = (size | 0x00ffffff) + 1; |
| } |
| } |
| orion5x_mbus_dram_info.num_cs = cs; |
| } |
| |
| void __init orion5x_setup_dev_boot_win(u32 base, u32 size) |
| { |
| setup_cpu_win(4, base, size, TARGET_DEV_BUS, ATTR_DEV_BOOT, -1); |
| } |
| |
| void __init orion5x_setup_dev0_win(u32 base, u32 size) |
| { |
| setup_cpu_win(5, base, size, TARGET_DEV_BUS, ATTR_DEV_CS0, -1); |
| } |
| |
| void __init orion5x_setup_dev1_win(u32 base, u32 size) |
| { |
| setup_cpu_win(6, base, size, TARGET_DEV_BUS, ATTR_DEV_CS1, -1); |
| } |
| |
| void __init orion5x_setup_dev2_win(u32 base, u32 size) |
| { |
| setup_cpu_win(7, base, size, TARGET_DEV_BUS, ATTR_DEV_CS2, -1); |
| } |
| |
| void __init orion5x_setup_pcie_wa_win(u32 base, u32 size) |
| { |
| setup_cpu_win(7, base, size, TARGET_PCIE, ATTR_PCIE_WA, -1); |
| } |