| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * OF helpers for regulator framework |
| * |
| * Copyright (C) 2011 Texas Instruments, Inc. |
| * Rajendra Nayak <rnayak@ti.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/of.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/of_regulator.h> |
| |
| #include "internal.h" |
| |
| static const char *const regulator_states[PM_SUSPEND_MAX + 1] = { |
| [PM_SUSPEND_STANDBY] = "regulator-state-standby", |
| [PM_SUSPEND_MEM] = "regulator-state-mem", |
| [PM_SUSPEND_MAX] = "regulator-state-disk", |
| }; |
| |
| static int of_get_regulation_constraints(struct device *dev, |
| struct device_node *np, |
| struct regulator_init_data **init_data, |
| const struct regulator_desc *desc) |
| { |
| struct regulation_constraints *constraints = &(*init_data)->constraints; |
| struct regulator_state *suspend_state; |
| struct device_node *suspend_np; |
| unsigned int mode; |
| int ret, i, len; |
| int n_phandles; |
| u32 pval; |
| |
| n_phandles = of_count_phandle_with_args(np, "regulator-coupled-with", |
| NULL); |
| n_phandles = max(n_phandles, 0); |
| |
| constraints->name = of_get_property(np, "regulator-name", NULL); |
| |
| if (!of_property_read_u32(np, "regulator-min-microvolt", &pval)) |
| constraints->min_uV = pval; |
| |
| if (!of_property_read_u32(np, "regulator-max-microvolt", &pval)) |
| constraints->max_uV = pval; |
| |
| /* Voltage change possible? */ |
| if (constraints->min_uV != constraints->max_uV) |
| constraints->valid_ops_mask |= REGULATOR_CHANGE_VOLTAGE; |
| |
| /* Do we have a voltage range, if so try to apply it? */ |
| if (constraints->min_uV && constraints->max_uV) |
| constraints->apply_uV = true; |
| |
| if (!of_property_read_u32(np, "regulator-microvolt-offset", &pval)) |
| constraints->uV_offset = pval; |
| if (!of_property_read_u32(np, "regulator-min-microamp", &pval)) |
| constraints->min_uA = pval; |
| if (!of_property_read_u32(np, "regulator-max-microamp", &pval)) |
| constraints->max_uA = pval; |
| |
| if (!of_property_read_u32(np, "regulator-input-current-limit-microamp", |
| &pval)) |
| constraints->ilim_uA = pval; |
| |
| /* Current change possible? */ |
| if (constraints->min_uA != constraints->max_uA) |
| constraints->valid_ops_mask |= REGULATOR_CHANGE_CURRENT; |
| |
| constraints->boot_on = of_property_read_bool(np, "regulator-boot-on"); |
| constraints->always_on = of_property_read_bool(np, "regulator-always-on"); |
| if (!constraints->always_on) /* status change should be possible. */ |
| constraints->valid_ops_mask |= REGULATOR_CHANGE_STATUS; |
| |
| constraints->pull_down = of_property_read_bool(np, "regulator-pull-down"); |
| |
| if (of_property_read_bool(np, "regulator-allow-bypass")) |
| constraints->valid_ops_mask |= REGULATOR_CHANGE_BYPASS; |
| |
| if (of_property_read_bool(np, "regulator-allow-set-load")) |
| constraints->valid_ops_mask |= REGULATOR_CHANGE_DRMS; |
| |
| ret = of_property_read_u32(np, "regulator-ramp-delay", &pval); |
| if (!ret) { |
| if (pval) |
| constraints->ramp_delay = pval; |
| else |
| constraints->ramp_disable = true; |
| } |
| |
| ret = of_property_read_u32(np, "regulator-settling-time-us", &pval); |
| if (!ret) |
| constraints->settling_time = pval; |
| |
| ret = of_property_read_u32(np, "regulator-settling-time-up-us", &pval); |
| if (!ret) |
| constraints->settling_time_up = pval; |
| if (constraints->settling_time_up && constraints->settling_time) { |
| pr_warn("%pOFn: ambiguous configuration for settling time, ignoring 'regulator-settling-time-up-us'\n", |
| np); |
| constraints->settling_time_up = 0; |
| } |
| |
| ret = of_property_read_u32(np, "regulator-settling-time-down-us", |
| &pval); |
| if (!ret) |
| constraints->settling_time_down = pval; |
| if (constraints->settling_time_down && constraints->settling_time) { |
| pr_warn("%pOFn: ambiguous configuration for settling time, ignoring 'regulator-settling-time-down-us'\n", |
| np); |
| constraints->settling_time_down = 0; |
| } |
| |
| ret = of_property_read_u32(np, "regulator-enable-ramp-delay", &pval); |
| if (!ret) |
| constraints->enable_time = pval; |
| |
| constraints->soft_start = of_property_read_bool(np, |
| "regulator-soft-start"); |
| ret = of_property_read_u32(np, "regulator-active-discharge", &pval); |
| if (!ret) { |
| constraints->active_discharge = |
| (pval) ? REGULATOR_ACTIVE_DISCHARGE_ENABLE : |
| REGULATOR_ACTIVE_DISCHARGE_DISABLE; |
| } |
| |
| if (!of_property_read_u32(np, "regulator-initial-mode", &pval)) { |
| if (desc && desc->of_map_mode) { |
| mode = desc->of_map_mode(pval); |
| if (mode == REGULATOR_MODE_INVALID) |
| pr_err("%pOFn: invalid mode %u\n", np, pval); |
| else |
| constraints->initial_mode = mode; |
| } else { |
| pr_warn("%pOFn: mapping for mode %d not defined\n", |
| np, pval); |
| } |
| } |
| |
| len = of_property_count_elems_of_size(np, "regulator-allowed-modes", |
| sizeof(u32)); |
| if (len > 0) { |
| if (desc && desc->of_map_mode) { |
| for (i = 0; i < len; i++) { |
| ret = of_property_read_u32_index(np, |
| "regulator-allowed-modes", i, &pval); |
| if (ret) { |
| pr_err("%pOFn: couldn't read allowed modes index %d, ret=%d\n", |
| np, i, ret); |
| break; |
| } |
| mode = desc->of_map_mode(pval); |
| if (mode == REGULATOR_MODE_INVALID) |
| pr_err("%pOFn: invalid regulator-allowed-modes element %u\n", |
| np, pval); |
| else |
| constraints->valid_modes_mask |= mode; |
| } |
| if (constraints->valid_modes_mask) |
| constraints->valid_ops_mask |
| |= REGULATOR_CHANGE_MODE; |
| } else { |
| pr_warn("%pOFn: mode mapping not defined\n", np); |
| } |
| } |
| |
| if (!of_property_read_u32(np, "regulator-system-load", &pval)) |
| constraints->system_load = pval; |
| |
| if (n_phandles) { |
| constraints->max_spread = devm_kzalloc(dev, |
| sizeof(*constraints->max_spread) * n_phandles, |
| GFP_KERNEL); |
| |
| if (!constraints->max_spread) |
| return -ENOMEM; |
| |
| of_property_read_u32_array(np, "regulator-coupled-max-spread", |
| constraints->max_spread, n_phandles); |
| } |
| |
| if (!of_property_read_u32(np, "regulator-max-step-microvolt", |
| &pval)) |
| constraints->max_uV_step = pval; |
| |
| constraints->over_current_protection = of_property_read_bool(np, |
| "regulator-over-current-protection"); |
| |
| for (i = 0; i < ARRAY_SIZE(regulator_states); i++) { |
| switch (i) { |
| case PM_SUSPEND_MEM: |
| suspend_state = &constraints->state_mem; |
| break; |
| case PM_SUSPEND_MAX: |
| suspend_state = &constraints->state_disk; |
| break; |
| case PM_SUSPEND_STANDBY: |
| suspend_state = &constraints->state_standby; |
| break; |
| case PM_SUSPEND_ON: |
| case PM_SUSPEND_TO_IDLE: |
| default: |
| continue; |
| } |
| |
| suspend_np = of_get_child_by_name(np, regulator_states[i]); |
| if (!suspend_np || !suspend_state) |
| continue; |
| |
| if (!of_property_read_u32(suspend_np, "regulator-mode", |
| &pval)) { |
| if (desc && desc->of_map_mode) { |
| mode = desc->of_map_mode(pval); |
| if (mode == REGULATOR_MODE_INVALID) |
| pr_err("%pOFn: invalid mode %u\n", |
| np, pval); |
| else |
| suspend_state->mode = mode; |
| } else { |
| pr_warn("%pOFn: mapping for mode %d not defined\n", |
| np, pval); |
| } |
| } |
| |
| if (of_property_read_bool(suspend_np, |
| "regulator-on-in-suspend")) |
| suspend_state->enabled = ENABLE_IN_SUSPEND; |
| else if (of_property_read_bool(suspend_np, |
| "regulator-off-in-suspend")) |
| suspend_state->enabled = DISABLE_IN_SUSPEND; |
| |
| if (!of_property_read_u32(suspend_np, |
| "regulator-suspend-min-microvolt", &pval)) |
| suspend_state->min_uV = pval; |
| |
| if (!of_property_read_u32(suspend_np, |
| "regulator-suspend-max-microvolt", &pval)) |
| suspend_state->max_uV = pval; |
| |
| if (!of_property_read_u32(suspend_np, |
| "regulator-suspend-microvolt", &pval)) |
| suspend_state->uV = pval; |
| else /* otherwise use min_uV as default suspend voltage */ |
| suspend_state->uV = suspend_state->min_uV; |
| |
| if (of_property_read_bool(suspend_np, |
| "regulator-changeable-in-suspend")) |
| suspend_state->changeable = true; |
| |
| if (i == PM_SUSPEND_MEM) |
| constraints->initial_state = PM_SUSPEND_MEM; |
| |
| of_node_put(suspend_np); |
| suspend_state = NULL; |
| suspend_np = NULL; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * of_get_regulator_init_data - extract regulator_init_data structure info |
| * @dev: device requesting for regulator_init_data |
| * @node: regulator device node |
| * @desc: regulator description |
| * |
| * Populates regulator_init_data structure by extracting data from device |
| * tree node, returns a pointer to the populated structure or NULL if memory |
| * alloc fails. |
| */ |
| struct regulator_init_data *of_get_regulator_init_data(struct device *dev, |
| struct device_node *node, |
| const struct regulator_desc *desc) |
| { |
| struct regulator_init_data *init_data; |
| |
| if (!node) |
| return NULL; |
| |
| init_data = devm_kzalloc(dev, sizeof(*init_data), GFP_KERNEL); |
| if (!init_data) |
| return NULL; /* Out of memory? */ |
| |
| if (of_get_regulation_constraints(dev, node, &init_data, desc)) |
| return NULL; |
| |
| return init_data; |
| } |
| EXPORT_SYMBOL_GPL(of_get_regulator_init_data); |
| |
| struct devm_of_regulator_matches { |
| struct of_regulator_match *matches; |
| unsigned int num_matches; |
| }; |
| |
| static void devm_of_regulator_put_matches(struct device *dev, void *res) |
| { |
| struct devm_of_regulator_matches *devm_matches = res; |
| int i; |
| |
| for (i = 0; i < devm_matches->num_matches; i++) |
| of_node_put(devm_matches->matches[i].of_node); |
| } |
| |
| /** |
| * of_regulator_match - extract multiple regulator init data from device tree. |
| * @dev: device requesting the data |
| * @node: parent device node of the regulators |
| * @matches: match table for the regulators |
| * @num_matches: number of entries in match table |
| * |
| * This function uses a match table specified by the regulator driver to |
| * parse regulator init data from the device tree. @node is expected to |
| * contain a set of child nodes, each providing the init data for one |
| * regulator. The data parsed from a child node will be matched to a regulator |
| * based on either the deprecated property regulator-compatible if present, |
| * or otherwise the child node's name. Note that the match table is modified |
| * in place and an additional of_node reference is taken for each matched |
| * regulator. |
| * |
| * Returns the number of matches found or a negative error code on failure. |
| */ |
| int of_regulator_match(struct device *dev, struct device_node *node, |
| struct of_regulator_match *matches, |
| unsigned int num_matches) |
| { |
| unsigned int count = 0; |
| unsigned int i; |
| const char *name; |
| struct device_node *child; |
| struct devm_of_regulator_matches *devm_matches; |
| |
| if (!dev || !node) |
| return -EINVAL; |
| |
| devm_matches = devres_alloc(devm_of_regulator_put_matches, |
| sizeof(struct devm_of_regulator_matches), |
| GFP_KERNEL); |
| if (!devm_matches) |
| return -ENOMEM; |
| |
| devm_matches->matches = matches; |
| devm_matches->num_matches = num_matches; |
| |
| devres_add(dev, devm_matches); |
| |
| for (i = 0; i < num_matches; i++) { |
| struct of_regulator_match *match = &matches[i]; |
| match->init_data = NULL; |
| match->of_node = NULL; |
| } |
| |
| for_each_child_of_node(node, child) { |
| name = of_get_property(child, |
| "regulator-compatible", NULL); |
| if (!name) |
| name = child->name; |
| for (i = 0; i < num_matches; i++) { |
| struct of_regulator_match *match = &matches[i]; |
| if (match->of_node) |
| continue; |
| |
| if (strcmp(match->name, name)) |
| continue; |
| |
| match->init_data = |
| of_get_regulator_init_data(dev, child, |
| match->desc); |
| if (!match->init_data) { |
| dev_err(dev, |
| "failed to parse DT for regulator %pOFn\n", |
| child); |
| of_node_put(child); |
| return -EINVAL; |
| } |
| match->of_node = of_node_get(child); |
| count++; |
| break; |
| } |
| } |
| |
| return count; |
| } |
| EXPORT_SYMBOL_GPL(of_regulator_match); |
| |
| static struct |
| device_node *regulator_of_get_init_node(struct device *dev, |
| const struct regulator_desc *desc) |
| { |
| struct device_node *search, *child; |
| const char *name; |
| |
| if (!dev->of_node || !desc->of_match) |
| return NULL; |
| |
| if (desc->regulators_node) { |
| search = of_get_child_by_name(dev->of_node, |
| desc->regulators_node); |
| } else { |
| search = of_node_get(dev->of_node); |
| |
| if (!strcmp(desc->of_match, search->name)) |
| return search; |
| } |
| |
| if (!search) { |
| dev_dbg(dev, "Failed to find regulator container node '%s'\n", |
| desc->regulators_node); |
| return NULL; |
| } |
| |
| for_each_available_child_of_node(search, child) { |
| name = of_get_property(child, "regulator-compatible", NULL); |
| if (!name) { |
| if (!desc->of_match_full_name) |
| name = child->name; |
| else |
| name = child->full_name; |
| } |
| |
| if (!strcmp(desc->of_match, name)) { |
| of_node_put(search); |
| /* |
| * 'of_node_get(child)' is already performed by the |
| * for_each loop. |
| */ |
| return child; |
| } |
| } |
| |
| of_node_put(search); |
| |
| return NULL; |
| } |
| |
| struct regulator_init_data *regulator_of_get_init_data(struct device *dev, |
| const struct regulator_desc *desc, |
| struct regulator_config *config, |
| struct device_node **node) |
| { |
| struct device_node *child; |
| struct regulator_init_data *init_data = NULL; |
| |
| child = regulator_of_get_init_node(dev, desc); |
| if (!child) |
| return NULL; |
| |
| init_data = of_get_regulator_init_data(dev, child, desc); |
| if (!init_data) { |
| dev_err(dev, "failed to parse DT for regulator %pOFn\n", child); |
| goto error; |
| } |
| |
| if (desc->of_parse_cb) { |
| int ret; |
| |
| ret = desc->of_parse_cb(child, desc, config); |
| if (ret) { |
| if (ret == -EPROBE_DEFER) { |
| of_node_put(child); |
| return ERR_PTR(-EPROBE_DEFER); |
| } |
| dev_err(dev, |
| "driver callback failed to parse DT for regulator %pOFn\n", |
| child); |
| goto error; |
| } |
| } |
| |
| *node = child; |
| |
| return init_data; |
| |
| error: |
| of_node_put(child); |
| |
| return NULL; |
| } |
| |
| struct regulator_dev *of_find_regulator_by_node(struct device_node *np) |
| { |
| struct device *dev; |
| |
| dev = class_find_device_by_of_node(®ulator_class, np); |
| |
| return dev ? dev_to_rdev(dev) : NULL; |
| } |
| |
| /* |
| * Returns number of regulators coupled with rdev. |
| */ |
| int of_get_n_coupled(struct regulator_dev *rdev) |
| { |
| struct device_node *node = rdev->dev.of_node; |
| int n_phandles; |
| |
| n_phandles = of_count_phandle_with_args(node, |
| "regulator-coupled-with", |
| NULL); |
| |
| return (n_phandles > 0) ? n_phandles : 0; |
| } |
| |
| /* Looks for "to_find" device_node in src's "regulator-coupled-with" property */ |
| static bool of_coupling_find_node(struct device_node *src, |
| struct device_node *to_find, |
| int *index) |
| { |
| int n_phandles, i; |
| bool found = false; |
| |
| n_phandles = of_count_phandle_with_args(src, |
| "regulator-coupled-with", |
| NULL); |
| |
| for (i = 0; i < n_phandles; i++) { |
| struct device_node *tmp = of_parse_phandle(src, |
| "regulator-coupled-with", i); |
| |
| if (!tmp) |
| break; |
| |
| /* found */ |
| if (tmp == to_find) |
| found = true; |
| |
| of_node_put(tmp); |
| |
| if (found) { |
| *index = i; |
| break; |
| } |
| } |
| |
| return found; |
| } |
| |
| /** |
| * of_check_coupling_data - Parse rdev's coupling properties and check data |
| * consistency |
| * @rdev: pointer to regulator_dev whose data is checked |
| * |
| * Function checks if all the following conditions are met: |
| * - rdev's max_spread is greater than 0 |
| * - all coupled regulators have the same max_spread |
| * - all coupled regulators have the same number of regulator_dev phandles |
| * - all regulators are linked to each other |
| * |
| * Returns true if all conditions are met. |
| */ |
| bool of_check_coupling_data(struct regulator_dev *rdev) |
| { |
| struct device_node *node = rdev->dev.of_node; |
| int n_phandles = of_get_n_coupled(rdev); |
| struct device_node *c_node; |
| int index; |
| int i; |
| bool ret = true; |
| |
| /* iterate over rdev's phandles */ |
| for (i = 0; i < n_phandles; i++) { |
| int max_spread = rdev->constraints->max_spread[i]; |
| int c_max_spread, c_n_phandles; |
| |
| if (max_spread <= 0) { |
| dev_err(&rdev->dev, "max_spread value invalid\n"); |
| return false; |
| } |
| |
| c_node = of_parse_phandle(node, |
| "regulator-coupled-with", i); |
| |
| if (!c_node) |
| ret = false; |
| |
| c_n_phandles = of_count_phandle_with_args(c_node, |
| "regulator-coupled-with", |
| NULL); |
| |
| if (c_n_phandles != n_phandles) { |
| dev_err(&rdev->dev, "number of coupled reg phandles mismatch\n"); |
| ret = false; |
| goto clean; |
| } |
| |
| if (!of_coupling_find_node(c_node, node, &index)) { |
| dev_err(&rdev->dev, "missing 2-way linking for coupled regulators\n"); |
| ret = false; |
| goto clean; |
| } |
| |
| if (of_property_read_u32_index(c_node, "regulator-coupled-max-spread", |
| index, &c_max_spread)) { |
| ret = false; |
| goto clean; |
| } |
| |
| if (c_max_spread != max_spread) { |
| dev_err(&rdev->dev, |
| "coupled regulators max_spread mismatch\n"); |
| ret = false; |
| goto clean; |
| } |
| |
| clean: |
| of_node_put(c_node); |
| if (!ret) |
| break; |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * of_parse_coupled regulator - Get regulator_dev pointer from rdev's property |
| * @rdev: Pointer to regulator_dev, whose DTS is used as a source to parse |
| * "regulator-coupled-with" property |
| * @index: Index in phandles array |
| * |
| * Returns the regulator_dev pointer parsed from DTS. If it has not been yet |
| * registered, returns NULL |
| */ |
| struct regulator_dev *of_parse_coupled_regulator(struct regulator_dev *rdev, |
| int index) |
| { |
| struct device_node *node = rdev->dev.of_node; |
| struct device_node *c_node; |
| struct regulator_dev *c_rdev; |
| |
| c_node = of_parse_phandle(node, "regulator-coupled-with", index); |
| if (!c_node) |
| return NULL; |
| |
| c_rdev = of_find_regulator_by_node(c_node); |
| |
| of_node_put(c_node); |
| |
| return c_rdev; |
| } |