| /******************************************************************************* |
| * |
| * Intel Ethernet Controller XL710 Family Linux Driver |
| * Copyright(c) 2013 - 2014 Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program. If not, see <http://www.gnu.org/licenses/>. |
| * |
| * The full GNU General Public License is included in this distribution in |
| * the file called "COPYING". |
| * |
| * Contact Information: |
| * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| ******************************************************************************/ |
| |
| #include "i40e_osdep.h" |
| #include "i40e_register.h" |
| #include "i40e_type.h" |
| #include "i40e_hmc.h" |
| #include "i40e_lan_hmc.h" |
| #include "i40e_prototype.h" |
| |
| /* lan specific interface functions */ |
| |
| /** |
| * i40e_align_l2obj_base - aligns base object pointer to 512 bytes |
| * @offset: base address offset needing alignment |
| * |
| * Aligns the layer 2 function private memory so it's 512-byte aligned. |
| **/ |
| static u64 i40e_align_l2obj_base(u64 offset) |
| { |
| u64 aligned_offset = offset; |
| |
| if ((offset % I40E_HMC_L2OBJ_BASE_ALIGNMENT) > 0) |
| aligned_offset += (I40E_HMC_L2OBJ_BASE_ALIGNMENT - |
| (offset % I40E_HMC_L2OBJ_BASE_ALIGNMENT)); |
| |
| return aligned_offset; |
| } |
| |
| /** |
| * i40e_calculate_l2fpm_size - calculates layer 2 FPM memory size |
| * @txq_num: number of Tx queues needing backing context |
| * @rxq_num: number of Rx queues needing backing context |
| * @fcoe_cntx_num: amount of FCoE statefull contexts needing backing context |
| * @fcoe_filt_num: number of FCoE filters needing backing context |
| * |
| * Calculates the maximum amount of memory for the function required, based |
| * on the number of resources it must provide context for. |
| **/ |
| static u64 i40e_calculate_l2fpm_size(u32 txq_num, u32 rxq_num, |
| u32 fcoe_cntx_num, u32 fcoe_filt_num) |
| { |
| u64 fpm_size = 0; |
| |
| fpm_size = txq_num * I40E_HMC_OBJ_SIZE_TXQ; |
| fpm_size = i40e_align_l2obj_base(fpm_size); |
| |
| fpm_size += (rxq_num * I40E_HMC_OBJ_SIZE_RXQ); |
| fpm_size = i40e_align_l2obj_base(fpm_size); |
| |
| fpm_size += (fcoe_cntx_num * I40E_HMC_OBJ_SIZE_FCOE_CNTX); |
| fpm_size = i40e_align_l2obj_base(fpm_size); |
| |
| fpm_size += (fcoe_filt_num * I40E_HMC_OBJ_SIZE_FCOE_FILT); |
| fpm_size = i40e_align_l2obj_base(fpm_size); |
| |
| return fpm_size; |
| } |
| |
| /** |
| * i40e_init_lan_hmc - initialize i40e_hmc_info struct |
| * @hw: pointer to the HW structure |
| * @txq_num: number of Tx queues needing backing context |
| * @rxq_num: number of Rx queues needing backing context |
| * @fcoe_cntx_num: amount of FCoE statefull contexts needing backing context |
| * @fcoe_filt_num: number of FCoE filters needing backing context |
| * |
| * This function will be called once per physical function initialization. |
| * It will fill out the i40e_hmc_obj_info structure for LAN objects based on |
| * the driver's provided input, as well as information from the HMC itself |
| * loaded from NVRAM. |
| * |
| * Assumptions: |
| * - HMC Resource Profile has been selected before calling this function. |
| **/ |
| i40e_status i40e_init_lan_hmc(struct i40e_hw *hw, u32 txq_num, |
| u32 rxq_num, u32 fcoe_cntx_num, |
| u32 fcoe_filt_num) |
| { |
| struct i40e_hmc_obj_info *obj, *full_obj; |
| i40e_status ret_code = 0; |
| u64 l2fpm_size; |
| u32 size_exp; |
| |
| hw->hmc.signature = I40E_HMC_INFO_SIGNATURE; |
| hw->hmc.hmc_fn_id = hw->pf_id; |
| |
| /* allocate memory for hmc_obj */ |
| ret_code = i40e_allocate_virt_mem(hw, &hw->hmc.hmc_obj_virt_mem, |
| sizeof(struct i40e_hmc_obj_info) * I40E_HMC_LAN_MAX); |
| if (ret_code) |
| goto init_lan_hmc_out; |
| hw->hmc.hmc_obj = (struct i40e_hmc_obj_info *) |
| hw->hmc.hmc_obj_virt_mem.va; |
| |
| /* The full object will be used to create the LAN HMC SD */ |
| full_obj = &hw->hmc.hmc_obj[I40E_HMC_LAN_FULL]; |
| full_obj->max_cnt = 0; |
| full_obj->cnt = 0; |
| full_obj->base = 0; |
| full_obj->size = 0; |
| |
| /* Tx queue context information */ |
| obj = &hw->hmc.hmc_obj[I40E_HMC_LAN_TX]; |
| obj->max_cnt = rd32(hw, I40E_GLHMC_LANQMAX); |
| obj->cnt = txq_num; |
| obj->base = 0; |
| size_exp = rd32(hw, I40E_GLHMC_LANTXOBJSZ); |
| obj->size = BIT_ULL(size_exp); |
| |
| /* validate values requested by driver don't exceed HMC capacity */ |
| if (txq_num > obj->max_cnt) { |
| ret_code = I40E_ERR_INVALID_HMC_OBJ_COUNT; |
| hw_dbg(hw, "i40e_init_lan_hmc: Tx context: asks for 0x%x but max allowed is 0x%x, returns error %d\n", |
| txq_num, obj->max_cnt, ret_code); |
| goto init_lan_hmc_out; |
| } |
| |
| /* aggregate values into the full LAN object for later */ |
| full_obj->max_cnt += obj->max_cnt; |
| full_obj->cnt += obj->cnt; |
| |
| /* Rx queue context information */ |
| obj = &hw->hmc.hmc_obj[I40E_HMC_LAN_RX]; |
| obj->max_cnt = rd32(hw, I40E_GLHMC_LANQMAX); |
| obj->cnt = rxq_num; |
| obj->base = hw->hmc.hmc_obj[I40E_HMC_LAN_TX].base + |
| (hw->hmc.hmc_obj[I40E_HMC_LAN_TX].cnt * |
| hw->hmc.hmc_obj[I40E_HMC_LAN_TX].size); |
| obj->base = i40e_align_l2obj_base(obj->base); |
| size_exp = rd32(hw, I40E_GLHMC_LANRXOBJSZ); |
| obj->size = BIT_ULL(size_exp); |
| |
| /* validate values requested by driver don't exceed HMC capacity */ |
| if (rxq_num > obj->max_cnt) { |
| ret_code = I40E_ERR_INVALID_HMC_OBJ_COUNT; |
| hw_dbg(hw, "i40e_init_lan_hmc: Rx context: asks for 0x%x but max allowed is 0x%x, returns error %d\n", |
| rxq_num, obj->max_cnt, ret_code); |
| goto init_lan_hmc_out; |
| } |
| |
| /* aggregate values into the full LAN object for later */ |
| full_obj->max_cnt += obj->max_cnt; |
| full_obj->cnt += obj->cnt; |
| |
| /* FCoE context information */ |
| obj = &hw->hmc.hmc_obj[I40E_HMC_FCOE_CTX]; |
| obj->max_cnt = rd32(hw, I40E_GLHMC_FCOEMAX); |
| obj->cnt = fcoe_cntx_num; |
| obj->base = hw->hmc.hmc_obj[I40E_HMC_LAN_RX].base + |
| (hw->hmc.hmc_obj[I40E_HMC_LAN_RX].cnt * |
| hw->hmc.hmc_obj[I40E_HMC_LAN_RX].size); |
| obj->base = i40e_align_l2obj_base(obj->base); |
| size_exp = rd32(hw, I40E_GLHMC_FCOEDDPOBJSZ); |
| obj->size = BIT_ULL(size_exp); |
| |
| /* validate values requested by driver don't exceed HMC capacity */ |
| if (fcoe_cntx_num > obj->max_cnt) { |
| ret_code = I40E_ERR_INVALID_HMC_OBJ_COUNT; |
| hw_dbg(hw, "i40e_init_lan_hmc: FCoE context: asks for 0x%x but max allowed is 0x%x, returns error %d\n", |
| fcoe_cntx_num, obj->max_cnt, ret_code); |
| goto init_lan_hmc_out; |
| } |
| |
| /* aggregate values into the full LAN object for later */ |
| full_obj->max_cnt += obj->max_cnt; |
| full_obj->cnt += obj->cnt; |
| |
| /* FCoE filter information */ |
| obj = &hw->hmc.hmc_obj[I40E_HMC_FCOE_FILT]; |
| obj->max_cnt = rd32(hw, I40E_GLHMC_FCOEFMAX); |
| obj->cnt = fcoe_filt_num; |
| obj->base = hw->hmc.hmc_obj[I40E_HMC_FCOE_CTX].base + |
| (hw->hmc.hmc_obj[I40E_HMC_FCOE_CTX].cnt * |
| hw->hmc.hmc_obj[I40E_HMC_FCOE_CTX].size); |
| obj->base = i40e_align_l2obj_base(obj->base); |
| size_exp = rd32(hw, I40E_GLHMC_FCOEFOBJSZ); |
| obj->size = BIT_ULL(size_exp); |
| |
| /* validate values requested by driver don't exceed HMC capacity */ |
| if (fcoe_filt_num > obj->max_cnt) { |
| ret_code = I40E_ERR_INVALID_HMC_OBJ_COUNT; |
| hw_dbg(hw, "i40e_init_lan_hmc: FCoE filter: asks for 0x%x but max allowed is 0x%x, returns error %d\n", |
| fcoe_filt_num, obj->max_cnt, ret_code); |
| goto init_lan_hmc_out; |
| } |
| |
| /* aggregate values into the full LAN object for later */ |
| full_obj->max_cnt += obj->max_cnt; |
| full_obj->cnt += obj->cnt; |
| |
| hw->hmc.first_sd_index = 0; |
| hw->hmc.sd_table.ref_cnt = 0; |
| l2fpm_size = i40e_calculate_l2fpm_size(txq_num, rxq_num, fcoe_cntx_num, |
| fcoe_filt_num); |
| if (NULL == hw->hmc.sd_table.sd_entry) { |
| hw->hmc.sd_table.sd_cnt = (u32) |
| (l2fpm_size + I40E_HMC_DIRECT_BP_SIZE - 1) / |
| I40E_HMC_DIRECT_BP_SIZE; |
| |
| /* allocate the sd_entry members in the sd_table */ |
| ret_code = i40e_allocate_virt_mem(hw, &hw->hmc.sd_table.addr, |
| (sizeof(struct i40e_hmc_sd_entry) * |
| hw->hmc.sd_table.sd_cnt)); |
| if (ret_code) |
| goto init_lan_hmc_out; |
| hw->hmc.sd_table.sd_entry = |
| (struct i40e_hmc_sd_entry *)hw->hmc.sd_table.addr.va; |
| } |
| /* store in the LAN full object for later */ |
| full_obj->size = l2fpm_size; |
| |
| init_lan_hmc_out: |
| return ret_code; |
| } |
| |
| /** |
| * i40e_remove_pd_page - Remove a page from the page descriptor table |
| * @hw: pointer to the HW structure |
| * @hmc_info: pointer to the HMC configuration information structure |
| * @idx: segment descriptor index to find the relevant page descriptor |
| * |
| * This function: |
| * 1. Marks the entry in pd table (for paged address mode) invalid |
| * 2. write to register PMPDINV to invalidate the backing page in FV cache |
| * 3. Decrement the ref count for pd_entry |
| * assumptions: |
| * 1. caller can deallocate the memory used by pd after this function |
| * returns. |
| **/ |
| static i40e_status i40e_remove_pd_page(struct i40e_hw *hw, |
| struct i40e_hmc_info *hmc_info, |
| u32 idx) |
| { |
| i40e_status ret_code = 0; |
| |
| if (!i40e_prep_remove_pd_page(hmc_info, idx)) |
| ret_code = i40e_remove_pd_page_new(hw, hmc_info, idx, true); |
| |
| return ret_code; |
| } |
| |
| /** |
| * i40e_remove_sd_bp - remove a backing page from a segment descriptor |
| * @hw: pointer to our HW structure |
| * @hmc_info: pointer to the HMC configuration information structure |
| * @idx: the page index |
| * |
| * This function: |
| * 1. Marks the entry in sd table (for direct address mode) invalid |
| * 2. write to register PMSDCMD, PMSDDATALOW(PMSDDATALOW.PMSDVALID set |
| * to 0) and PMSDDATAHIGH to invalidate the sd page |
| * 3. Decrement the ref count for the sd_entry |
| * assumptions: |
| * 1. caller can deallocate the memory used by backing storage after this |
| * function returns. |
| **/ |
| static i40e_status i40e_remove_sd_bp(struct i40e_hw *hw, |
| struct i40e_hmc_info *hmc_info, |
| u32 idx) |
| { |
| i40e_status ret_code = 0; |
| |
| if (!i40e_prep_remove_sd_bp(hmc_info, idx)) |
| ret_code = i40e_remove_sd_bp_new(hw, hmc_info, idx, true); |
| |
| return ret_code; |
| } |
| |
| /** |
| * i40e_create_lan_hmc_object - allocate backing store for hmc objects |
| * @hw: pointer to the HW structure |
| * @info: pointer to i40e_hmc_create_obj_info struct |
| * |
| * This will allocate memory for PDs and backing pages and populate |
| * the sd and pd entries. |
| **/ |
| static i40e_status i40e_create_lan_hmc_object(struct i40e_hw *hw, |
| struct i40e_hmc_lan_create_obj_info *info) |
| { |
| i40e_status ret_code = 0; |
| struct i40e_hmc_sd_entry *sd_entry; |
| u32 pd_idx1 = 0, pd_lmt1 = 0; |
| u32 pd_idx = 0, pd_lmt = 0; |
| bool pd_error = false; |
| u32 sd_idx, sd_lmt; |
| u64 sd_size; |
| u32 i, j; |
| |
| if (NULL == info) { |
| ret_code = I40E_ERR_BAD_PTR; |
| hw_dbg(hw, "i40e_create_lan_hmc_object: bad info ptr\n"); |
| goto exit; |
| } |
| if (NULL == info->hmc_info) { |
| ret_code = I40E_ERR_BAD_PTR; |
| hw_dbg(hw, "i40e_create_lan_hmc_object: bad hmc_info ptr\n"); |
| goto exit; |
| } |
| if (I40E_HMC_INFO_SIGNATURE != info->hmc_info->signature) { |
| ret_code = I40E_ERR_BAD_PTR; |
| hw_dbg(hw, "i40e_create_lan_hmc_object: bad signature\n"); |
| goto exit; |
| } |
| |
| if (info->start_idx >= info->hmc_info->hmc_obj[info->rsrc_type].cnt) { |
| ret_code = I40E_ERR_INVALID_HMC_OBJ_INDEX; |
| hw_dbg(hw, "i40e_create_lan_hmc_object: returns error %d\n", |
| ret_code); |
| goto exit; |
| } |
| if ((info->start_idx + info->count) > |
| info->hmc_info->hmc_obj[info->rsrc_type].cnt) { |
| ret_code = I40E_ERR_INVALID_HMC_OBJ_COUNT; |
| hw_dbg(hw, "i40e_create_lan_hmc_object: returns error %d\n", |
| ret_code); |
| goto exit; |
| } |
| |
| /* find sd index and limit */ |
| I40E_FIND_SD_INDEX_LIMIT(info->hmc_info, info->rsrc_type, |
| info->start_idx, info->count, |
| &sd_idx, &sd_lmt); |
| if (sd_idx >= info->hmc_info->sd_table.sd_cnt || |
| sd_lmt > info->hmc_info->sd_table.sd_cnt) { |
| ret_code = I40E_ERR_INVALID_SD_INDEX; |
| goto exit; |
| } |
| /* find pd index */ |
| I40E_FIND_PD_INDEX_LIMIT(info->hmc_info, info->rsrc_type, |
| info->start_idx, info->count, &pd_idx, |
| &pd_lmt); |
| |
| /* This is to cover for cases where you may not want to have an SD with |
| * the full 2M memory but something smaller. By not filling out any |
| * size, the function will default the SD size to be 2M. |
| */ |
| if (info->direct_mode_sz == 0) |
| sd_size = I40E_HMC_DIRECT_BP_SIZE; |
| else |
| sd_size = info->direct_mode_sz; |
| |
| /* check if all the sds are valid. If not, allocate a page and |
| * initialize it. |
| */ |
| for (j = sd_idx; j < sd_lmt; j++) { |
| /* update the sd table entry */ |
| ret_code = i40e_add_sd_table_entry(hw, info->hmc_info, j, |
| info->entry_type, |
| sd_size); |
| if (ret_code) |
| goto exit_sd_error; |
| sd_entry = &info->hmc_info->sd_table.sd_entry[j]; |
| if (I40E_SD_TYPE_PAGED == sd_entry->entry_type) { |
| /* check if all the pds in this sd are valid. If not, |
| * allocate a page and initialize it. |
| */ |
| |
| /* find pd_idx and pd_lmt in this sd */ |
| pd_idx1 = max(pd_idx, (j * I40E_HMC_MAX_BP_COUNT)); |
| pd_lmt1 = min(pd_lmt, |
| ((j + 1) * I40E_HMC_MAX_BP_COUNT)); |
| for (i = pd_idx1; i < pd_lmt1; i++) { |
| /* update the pd table entry */ |
| ret_code = i40e_add_pd_table_entry(hw, |
| info->hmc_info, |
| i, NULL); |
| if (ret_code) { |
| pd_error = true; |
| break; |
| } |
| } |
| if (pd_error) { |
| /* remove the backing pages from pd_idx1 to i */ |
| while (i && (i > pd_idx1)) { |
| i40e_remove_pd_bp(hw, info->hmc_info, |
| (i - 1)); |
| i--; |
| } |
| } |
| } |
| if (!sd_entry->valid) { |
| sd_entry->valid = true; |
| switch (sd_entry->entry_type) { |
| case I40E_SD_TYPE_PAGED: |
| I40E_SET_PF_SD_ENTRY(hw, |
| sd_entry->u.pd_table.pd_page_addr.pa, |
| j, sd_entry->entry_type); |
| break; |
| case I40E_SD_TYPE_DIRECT: |
| I40E_SET_PF_SD_ENTRY(hw, sd_entry->u.bp.addr.pa, |
| j, sd_entry->entry_type); |
| break; |
| default: |
| ret_code = I40E_ERR_INVALID_SD_TYPE; |
| goto exit; |
| } |
| } |
| } |
| goto exit; |
| |
| exit_sd_error: |
| /* cleanup for sd entries from j to sd_idx */ |
| while (j && (j > sd_idx)) { |
| sd_entry = &info->hmc_info->sd_table.sd_entry[j - 1]; |
| switch (sd_entry->entry_type) { |
| case I40E_SD_TYPE_PAGED: |
| pd_idx1 = max(pd_idx, |
| ((j - 1) * I40E_HMC_MAX_BP_COUNT)); |
| pd_lmt1 = min(pd_lmt, (j * I40E_HMC_MAX_BP_COUNT)); |
| for (i = pd_idx1; i < pd_lmt1; i++) |
| i40e_remove_pd_bp(hw, info->hmc_info, i); |
| i40e_remove_pd_page(hw, info->hmc_info, (j - 1)); |
| break; |
| case I40E_SD_TYPE_DIRECT: |
| i40e_remove_sd_bp(hw, info->hmc_info, (j - 1)); |
| break; |
| default: |
| ret_code = I40E_ERR_INVALID_SD_TYPE; |
| break; |
| } |
| j--; |
| } |
| exit: |
| return ret_code; |
| } |
| |
| /** |
| * i40e_configure_lan_hmc - prepare the HMC backing store |
| * @hw: pointer to the hw structure |
| * @model: the model for the layout of the SD/PD tables |
| * |
| * - This function will be called once per physical function initialization. |
| * - This function will be called after i40e_init_lan_hmc() and before |
| * any LAN/FCoE HMC objects can be created. |
| **/ |
| i40e_status i40e_configure_lan_hmc(struct i40e_hw *hw, |
| enum i40e_hmc_model model) |
| { |
| struct i40e_hmc_lan_create_obj_info info; |
| i40e_status ret_code = 0; |
| u8 hmc_fn_id = hw->hmc.hmc_fn_id; |
| struct i40e_hmc_obj_info *obj; |
| |
| /* Initialize part of the create object info struct */ |
| info.hmc_info = &hw->hmc; |
| info.rsrc_type = I40E_HMC_LAN_FULL; |
| info.start_idx = 0; |
| info.direct_mode_sz = hw->hmc.hmc_obj[I40E_HMC_LAN_FULL].size; |
| |
| /* Build the SD entry for the LAN objects */ |
| switch (model) { |
| case I40E_HMC_MODEL_DIRECT_PREFERRED: |
| case I40E_HMC_MODEL_DIRECT_ONLY: |
| info.entry_type = I40E_SD_TYPE_DIRECT; |
| /* Make one big object, a single SD */ |
| info.count = 1; |
| ret_code = i40e_create_lan_hmc_object(hw, &info); |
| if (ret_code && (model == I40E_HMC_MODEL_DIRECT_PREFERRED)) |
| goto try_type_paged; |
| else if (ret_code) |
| goto configure_lan_hmc_out; |
| /* else clause falls through the break */ |
| break; |
| case I40E_HMC_MODEL_PAGED_ONLY: |
| try_type_paged: |
| info.entry_type = I40E_SD_TYPE_PAGED; |
| /* Make one big object in the PD table */ |
| info.count = 1; |
| ret_code = i40e_create_lan_hmc_object(hw, &info); |
| if (ret_code) |
| goto configure_lan_hmc_out; |
| break; |
| default: |
| /* unsupported type */ |
| ret_code = I40E_ERR_INVALID_SD_TYPE; |
| hw_dbg(hw, "i40e_configure_lan_hmc: Unknown SD type: %d\n", |
| ret_code); |
| goto configure_lan_hmc_out; |
| } |
| |
| /* Configure and program the FPM registers so objects can be created */ |
| |
| /* Tx contexts */ |
| obj = &hw->hmc.hmc_obj[I40E_HMC_LAN_TX]; |
| wr32(hw, I40E_GLHMC_LANTXBASE(hmc_fn_id), |
| (u32)((obj->base & I40E_GLHMC_LANTXBASE_FPMLANTXBASE_MASK) / 512)); |
| wr32(hw, I40E_GLHMC_LANTXCNT(hmc_fn_id), obj->cnt); |
| |
| /* Rx contexts */ |
| obj = &hw->hmc.hmc_obj[I40E_HMC_LAN_RX]; |
| wr32(hw, I40E_GLHMC_LANRXBASE(hmc_fn_id), |
| (u32)((obj->base & I40E_GLHMC_LANRXBASE_FPMLANRXBASE_MASK) / 512)); |
| wr32(hw, I40E_GLHMC_LANRXCNT(hmc_fn_id), obj->cnt); |
| |
| /* FCoE contexts */ |
| obj = &hw->hmc.hmc_obj[I40E_HMC_FCOE_CTX]; |
| wr32(hw, I40E_GLHMC_FCOEDDPBASE(hmc_fn_id), |
| (u32)((obj->base & I40E_GLHMC_FCOEDDPBASE_FPMFCOEDDPBASE_MASK) / 512)); |
| wr32(hw, I40E_GLHMC_FCOEDDPCNT(hmc_fn_id), obj->cnt); |
| |
| /* FCoE filters */ |
| obj = &hw->hmc.hmc_obj[I40E_HMC_FCOE_FILT]; |
| wr32(hw, I40E_GLHMC_FCOEFBASE(hmc_fn_id), |
| (u32)((obj->base & I40E_GLHMC_FCOEFBASE_FPMFCOEFBASE_MASK) / 512)); |
| wr32(hw, I40E_GLHMC_FCOEFCNT(hmc_fn_id), obj->cnt); |
| |
| configure_lan_hmc_out: |
| return ret_code; |
| } |
| |
| /** |
| * i40e_delete_hmc_object - remove hmc objects |
| * @hw: pointer to the HW structure |
| * @info: pointer to i40e_hmc_delete_obj_info struct |
| * |
| * This will de-populate the SDs and PDs. It frees |
| * the memory for PDS and backing storage. After this function is returned, |
| * caller should deallocate memory allocated previously for |
| * book-keeping information about PDs and backing storage. |
| **/ |
| static i40e_status i40e_delete_lan_hmc_object(struct i40e_hw *hw, |
| struct i40e_hmc_lan_delete_obj_info *info) |
| { |
| i40e_status ret_code = 0; |
| struct i40e_hmc_pd_table *pd_table; |
| u32 pd_idx, pd_lmt, rel_pd_idx; |
| u32 sd_idx, sd_lmt; |
| u32 i, j; |
| |
| if (NULL == info) { |
| ret_code = I40E_ERR_BAD_PTR; |
| hw_dbg(hw, "i40e_delete_hmc_object: bad info ptr\n"); |
| goto exit; |
| } |
| if (NULL == info->hmc_info) { |
| ret_code = I40E_ERR_BAD_PTR; |
| hw_dbg(hw, "i40e_delete_hmc_object: bad info->hmc_info ptr\n"); |
| goto exit; |
| } |
| if (I40E_HMC_INFO_SIGNATURE != info->hmc_info->signature) { |
| ret_code = I40E_ERR_BAD_PTR; |
| hw_dbg(hw, "i40e_delete_hmc_object: bad hmc_info->signature\n"); |
| goto exit; |
| } |
| |
| if (NULL == info->hmc_info->sd_table.sd_entry) { |
| ret_code = I40E_ERR_BAD_PTR; |
| hw_dbg(hw, "i40e_delete_hmc_object: bad sd_entry\n"); |
| goto exit; |
| } |
| |
| if (NULL == info->hmc_info->hmc_obj) { |
| ret_code = I40E_ERR_BAD_PTR; |
| hw_dbg(hw, "i40e_delete_hmc_object: bad hmc_info->hmc_obj\n"); |
| goto exit; |
| } |
| if (info->start_idx >= info->hmc_info->hmc_obj[info->rsrc_type].cnt) { |
| ret_code = I40E_ERR_INVALID_HMC_OBJ_INDEX; |
| hw_dbg(hw, "i40e_delete_hmc_object: returns error %d\n", |
| ret_code); |
| goto exit; |
| } |
| |
| if ((info->start_idx + info->count) > |
| info->hmc_info->hmc_obj[info->rsrc_type].cnt) { |
| ret_code = I40E_ERR_INVALID_HMC_OBJ_COUNT; |
| hw_dbg(hw, "i40e_delete_hmc_object: returns error %d\n", |
| ret_code); |
| goto exit; |
| } |
| |
| I40E_FIND_PD_INDEX_LIMIT(info->hmc_info, info->rsrc_type, |
| info->start_idx, info->count, &pd_idx, |
| &pd_lmt); |
| |
| for (j = pd_idx; j < pd_lmt; j++) { |
| sd_idx = j / I40E_HMC_PD_CNT_IN_SD; |
| |
| if (I40E_SD_TYPE_PAGED != |
| info->hmc_info->sd_table.sd_entry[sd_idx].entry_type) |
| continue; |
| |
| rel_pd_idx = j % I40E_HMC_PD_CNT_IN_SD; |
| |
| pd_table = |
| &info->hmc_info->sd_table.sd_entry[sd_idx].u.pd_table; |
| if (pd_table->pd_entry[rel_pd_idx].valid) { |
| ret_code = i40e_remove_pd_bp(hw, info->hmc_info, j); |
| if (ret_code) |
| goto exit; |
| } |
| } |
| |
| /* find sd index and limit */ |
| I40E_FIND_SD_INDEX_LIMIT(info->hmc_info, info->rsrc_type, |
| info->start_idx, info->count, |
| &sd_idx, &sd_lmt); |
| if (sd_idx >= info->hmc_info->sd_table.sd_cnt || |
| sd_lmt > info->hmc_info->sd_table.sd_cnt) { |
| ret_code = I40E_ERR_INVALID_SD_INDEX; |
| goto exit; |
| } |
| |
| for (i = sd_idx; i < sd_lmt; i++) { |
| if (!info->hmc_info->sd_table.sd_entry[i].valid) |
| continue; |
| switch (info->hmc_info->sd_table.sd_entry[i].entry_type) { |
| case I40E_SD_TYPE_DIRECT: |
| ret_code = i40e_remove_sd_bp(hw, info->hmc_info, i); |
| if (ret_code) |
| goto exit; |
| break; |
| case I40E_SD_TYPE_PAGED: |
| ret_code = i40e_remove_pd_page(hw, info->hmc_info, i); |
| if (ret_code) |
| goto exit; |
| break; |
| default: |
| break; |
| } |
| } |
| exit: |
| return ret_code; |
| } |
| |
| /** |
| * i40e_shutdown_lan_hmc - Remove HMC backing store, free allocated memory |
| * @hw: pointer to the hw structure |
| * |
| * This must be called by drivers as they are shutting down and being |
| * removed from the OS. |
| **/ |
| i40e_status i40e_shutdown_lan_hmc(struct i40e_hw *hw) |
| { |
| struct i40e_hmc_lan_delete_obj_info info; |
| i40e_status ret_code; |
| |
| info.hmc_info = &hw->hmc; |
| info.rsrc_type = I40E_HMC_LAN_FULL; |
| info.start_idx = 0; |
| info.count = 1; |
| |
| /* delete the object */ |
| ret_code = i40e_delete_lan_hmc_object(hw, &info); |
| |
| /* free the SD table entry for LAN */ |
| i40e_free_virt_mem(hw, &hw->hmc.sd_table.addr); |
| hw->hmc.sd_table.sd_cnt = 0; |
| hw->hmc.sd_table.sd_entry = NULL; |
| |
| /* free memory used for hmc_obj */ |
| i40e_free_virt_mem(hw, &hw->hmc.hmc_obj_virt_mem); |
| hw->hmc.hmc_obj = NULL; |
| |
| return ret_code; |
| } |
| |
| #define I40E_HMC_STORE(_struct, _ele) \ |
| offsetof(struct _struct, _ele), \ |
| FIELD_SIZEOF(struct _struct, _ele) |
| |
| struct i40e_context_ele { |
| u16 offset; |
| u16 size_of; |
| u16 width; |
| u16 lsb; |
| }; |
| |
| /* LAN Tx Queue Context */ |
| static struct i40e_context_ele i40e_hmc_txq_ce_info[] = { |
| /* Field Width LSB */ |
| {I40E_HMC_STORE(i40e_hmc_obj_txq, head), 13, 0 }, |
| {I40E_HMC_STORE(i40e_hmc_obj_txq, new_context), 1, 30 }, |
| {I40E_HMC_STORE(i40e_hmc_obj_txq, base), 57, 32 }, |
| {I40E_HMC_STORE(i40e_hmc_obj_txq, fc_ena), 1, 89 }, |
| {I40E_HMC_STORE(i40e_hmc_obj_txq, timesync_ena), 1, 90 }, |
| {I40E_HMC_STORE(i40e_hmc_obj_txq, fd_ena), 1, 91 }, |
| {I40E_HMC_STORE(i40e_hmc_obj_txq, alt_vlan_ena), 1, 92 }, |
| {I40E_HMC_STORE(i40e_hmc_obj_txq, cpuid), 8, 96 }, |
| /* line 1 */ |
| {I40E_HMC_STORE(i40e_hmc_obj_txq, thead_wb), 13, 0 + 128 }, |
| {I40E_HMC_STORE(i40e_hmc_obj_txq, head_wb_ena), 1, 32 + 128 }, |
| {I40E_HMC_STORE(i40e_hmc_obj_txq, qlen), 13, 33 + 128 }, |
| {I40E_HMC_STORE(i40e_hmc_obj_txq, tphrdesc_ena), 1, 46 + 128 }, |
| {I40E_HMC_STORE(i40e_hmc_obj_txq, tphrpacket_ena), 1, 47 + 128 }, |
| {I40E_HMC_STORE(i40e_hmc_obj_txq, tphwdesc_ena), 1, 48 + 128 }, |
| {I40E_HMC_STORE(i40e_hmc_obj_txq, head_wb_addr), 64, 64 + 128 }, |
| /* line 7 */ |
| {I40E_HMC_STORE(i40e_hmc_obj_txq, crc), 32, 0 + (7 * 128) }, |
| {I40E_HMC_STORE(i40e_hmc_obj_txq, rdylist), 10, 84 + (7 * 128) }, |
| {I40E_HMC_STORE(i40e_hmc_obj_txq, rdylist_act), 1, 94 + (7 * 128) }, |
| { 0 } |
| }; |
| |
| /* LAN Rx Queue Context */ |
| static struct i40e_context_ele i40e_hmc_rxq_ce_info[] = { |
| /* Field Width LSB */ |
| { I40E_HMC_STORE(i40e_hmc_obj_rxq, head), 13, 0 }, |
| { I40E_HMC_STORE(i40e_hmc_obj_rxq, cpuid), 8, 13 }, |
| { I40E_HMC_STORE(i40e_hmc_obj_rxq, base), 57, 32 }, |
| { I40E_HMC_STORE(i40e_hmc_obj_rxq, qlen), 13, 89 }, |
| { I40E_HMC_STORE(i40e_hmc_obj_rxq, dbuff), 7, 102 }, |
| { I40E_HMC_STORE(i40e_hmc_obj_rxq, hbuff), 5, 109 }, |
| { I40E_HMC_STORE(i40e_hmc_obj_rxq, dtype), 2, 114 }, |
| { I40E_HMC_STORE(i40e_hmc_obj_rxq, dsize), 1, 116 }, |
| { I40E_HMC_STORE(i40e_hmc_obj_rxq, crcstrip), 1, 117 }, |
| { I40E_HMC_STORE(i40e_hmc_obj_rxq, fc_ena), 1, 118 }, |
| { I40E_HMC_STORE(i40e_hmc_obj_rxq, l2tsel), 1, 119 }, |
| { I40E_HMC_STORE(i40e_hmc_obj_rxq, hsplit_0), 4, 120 }, |
| { I40E_HMC_STORE(i40e_hmc_obj_rxq, hsplit_1), 2, 124 }, |
| { I40E_HMC_STORE(i40e_hmc_obj_rxq, showiv), 1, 127 }, |
| { I40E_HMC_STORE(i40e_hmc_obj_rxq, rxmax), 14, 174 }, |
| { I40E_HMC_STORE(i40e_hmc_obj_rxq, tphrdesc_ena), 1, 193 }, |
| { I40E_HMC_STORE(i40e_hmc_obj_rxq, tphwdesc_ena), 1, 194 }, |
| { I40E_HMC_STORE(i40e_hmc_obj_rxq, tphdata_ena), 1, 195 }, |
| { I40E_HMC_STORE(i40e_hmc_obj_rxq, tphhead_ena), 1, 196 }, |
| { I40E_HMC_STORE(i40e_hmc_obj_rxq, lrxqthresh), 3, 198 }, |
| { I40E_HMC_STORE(i40e_hmc_obj_rxq, prefena), 1, 201 }, |
| { 0 } |
| }; |
| |
| /** |
| * i40e_write_byte - replace HMC context byte |
| * @hmc_bits: pointer to the HMC memory |
| * @ce_info: a description of the struct to be read from |
| * @src: the struct to be read from |
| **/ |
| static void i40e_write_byte(u8 *hmc_bits, |
| struct i40e_context_ele *ce_info, |
| u8 *src) |
| { |
| u8 src_byte, dest_byte, mask; |
| u8 *from, *dest; |
| u16 shift_width; |
| |
| /* copy from the next struct field */ |
| from = src + ce_info->offset; |
| |
| /* prepare the bits and mask */ |
| shift_width = ce_info->lsb % 8; |
| mask = (u8)(BIT(ce_info->width) - 1); |
| |
| src_byte = *from; |
| src_byte &= mask; |
| |
| /* shift to correct alignment */ |
| mask <<= shift_width; |
| src_byte <<= shift_width; |
| |
| /* get the current bits from the target bit string */ |
| dest = hmc_bits + (ce_info->lsb / 8); |
| |
| memcpy(&dest_byte, dest, sizeof(dest_byte)); |
| |
| dest_byte &= ~mask; /* get the bits not changing */ |
| dest_byte |= src_byte; /* add in the new bits */ |
| |
| /* put it all back */ |
| memcpy(dest, &dest_byte, sizeof(dest_byte)); |
| } |
| |
| /** |
| * i40e_write_word - replace HMC context word |
| * @hmc_bits: pointer to the HMC memory |
| * @ce_info: a description of the struct to be read from |
| * @src: the struct to be read from |
| **/ |
| static void i40e_write_word(u8 *hmc_bits, |
| struct i40e_context_ele *ce_info, |
| u8 *src) |
| { |
| u16 src_word, mask; |
| u8 *from, *dest; |
| u16 shift_width; |
| __le16 dest_word; |
| |
| /* copy from the next struct field */ |
| from = src + ce_info->offset; |
| |
| /* prepare the bits and mask */ |
| shift_width = ce_info->lsb % 8; |
| mask = BIT(ce_info->width) - 1; |
| |
| /* don't swizzle the bits until after the mask because the mask bits |
| * will be in a different bit position on big endian machines |
| */ |
| src_word = *(u16 *)from; |
| src_word &= mask; |
| |
| /* shift to correct alignment */ |
| mask <<= shift_width; |
| src_word <<= shift_width; |
| |
| /* get the current bits from the target bit string */ |
| dest = hmc_bits + (ce_info->lsb / 8); |
| |
| memcpy(&dest_word, dest, sizeof(dest_word)); |
| |
| dest_word &= ~(cpu_to_le16(mask)); /* get the bits not changing */ |
| dest_word |= cpu_to_le16(src_word); /* add in the new bits */ |
| |
| /* put it all back */ |
| memcpy(dest, &dest_word, sizeof(dest_word)); |
| } |
| |
| /** |
| * i40e_write_dword - replace HMC context dword |
| * @hmc_bits: pointer to the HMC memory |
| * @ce_info: a description of the struct to be read from |
| * @src: the struct to be read from |
| **/ |
| static void i40e_write_dword(u8 *hmc_bits, |
| struct i40e_context_ele *ce_info, |
| u8 *src) |
| { |
| u32 src_dword, mask; |
| u8 *from, *dest; |
| u16 shift_width; |
| __le32 dest_dword; |
| |
| /* copy from the next struct field */ |
| from = src + ce_info->offset; |
| |
| /* prepare the bits and mask */ |
| shift_width = ce_info->lsb % 8; |
| |
| /* if the field width is exactly 32 on an x86 machine, then the shift |
| * operation will not work because the SHL instructions count is masked |
| * to 5 bits so the shift will do nothing |
| */ |
| if (ce_info->width < 32) |
| mask = BIT(ce_info->width) - 1; |
| else |
| mask = ~(u32)0; |
| |
| /* don't swizzle the bits until after the mask because the mask bits |
| * will be in a different bit position on big endian machines |
| */ |
| src_dword = *(u32 *)from; |
| src_dword &= mask; |
| |
| /* shift to correct alignment */ |
| mask <<= shift_width; |
| src_dword <<= shift_width; |
| |
| /* get the current bits from the target bit string */ |
| dest = hmc_bits + (ce_info->lsb / 8); |
| |
| memcpy(&dest_dword, dest, sizeof(dest_dword)); |
| |
| dest_dword &= ~(cpu_to_le32(mask)); /* get the bits not changing */ |
| dest_dword |= cpu_to_le32(src_dword); /* add in the new bits */ |
| |
| /* put it all back */ |
| memcpy(dest, &dest_dword, sizeof(dest_dword)); |
| } |
| |
| /** |
| * i40e_write_qword - replace HMC context qword |
| * @hmc_bits: pointer to the HMC memory |
| * @ce_info: a description of the struct to be read from |
| * @src: the struct to be read from |
| **/ |
| static void i40e_write_qword(u8 *hmc_bits, |
| struct i40e_context_ele *ce_info, |
| u8 *src) |
| { |
| u64 src_qword, mask; |
| u8 *from, *dest; |
| u16 shift_width; |
| __le64 dest_qword; |
| |
| /* copy from the next struct field */ |
| from = src + ce_info->offset; |
| |
| /* prepare the bits and mask */ |
| shift_width = ce_info->lsb % 8; |
| |
| /* if the field width is exactly 64 on an x86 machine, then the shift |
| * operation will not work because the SHL instructions count is masked |
| * to 6 bits so the shift will do nothing |
| */ |
| if (ce_info->width < 64) |
| mask = BIT_ULL(ce_info->width) - 1; |
| else |
| mask = ~(u64)0; |
| |
| /* don't swizzle the bits until after the mask because the mask bits |
| * will be in a different bit position on big endian machines |
| */ |
| src_qword = *(u64 *)from; |
| src_qword &= mask; |
| |
| /* shift to correct alignment */ |
| mask <<= shift_width; |
| src_qword <<= shift_width; |
| |
| /* get the current bits from the target bit string */ |
| dest = hmc_bits + (ce_info->lsb / 8); |
| |
| memcpy(&dest_qword, dest, sizeof(dest_qword)); |
| |
| dest_qword &= ~(cpu_to_le64(mask)); /* get the bits not changing */ |
| dest_qword |= cpu_to_le64(src_qword); /* add in the new bits */ |
| |
| /* put it all back */ |
| memcpy(dest, &dest_qword, sizeof(dest_qword)); |
| } |
| |
| /** |
| * i40e_clear_hmc_context - zero out the HMC context bits |
| * @hw: the hardware struct |
| * @context_bytes: pointer to the context bit array (DMA memory) |
| * @hmc_type: the type of HMC resource |
| **/ |
| static i40e_status i40e_clear_hmc_context(struct i40e_hw *hw, |
| u8 *context_bytes, |
| enum i40e_hmc_lan_rsrc_type hmc_type) |
| { |
| /* clean the bit array */ |
| memset(context_bytes, 0, (u32)hw->hmc.hmc_obj[hmc_type].size); |
| |
| return 0; |
| } |
| |
| /** |
| * i40e_set_hmc_context - replace HMC context bits |
| * @context_bytes: pointer to the context bit array |
| * @ce_info: a description of the struct to be filled |
| * @dest: the struct to be filled |
| **/ |
| static i40e_status i40e_set_hmc_context(u8 *context_bytes, |
| struct i40e_context_ele *ce_info, |
| u8 *dest) |
| { |
| int f; |
| |
| for (f = 0; ce_info[f].width != 0; f++) { |
| |
| /* we have to deal with each element of the HMC using the |
| * correct size so that we are correct regardless of the |
| * endianness of the machine |
| */ |
| switch (ce_info[f].size_of) { |
| case 1: |
| i40e_write_byte(context_bytes, &ce_info[f], dest); |
| break; |
| case 2: |
| i40e_write_word(context_bytes, &ce_info[f], dest); |
| break; |
| case 4: |
| i40e_write_dword(context_bytes, &ce_info[f], dest); |
| break; |
| case 8: |
| i40e_write_qword(context_bytes, &ce_info[f], dest); |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * i40e_hmc_get_object_va - retrieves an object's virtual address |
| * @hmc_info: pointer to i40e_hmc_info struct |
| * @object_base: pointer to u64 to get the va |
| * @rsrc_type: the hmc resource type |
| * @obj_idx: hmc object index |
| * |
| * This function retrieves the object's virtual address from the object |
| * base pointer. This function is used for LAN Queue contexts. |
| **/ |
| static |
| i40e_status i40e_hmc_get_object_va(struct i40e_hmc_info *hmc_info, |
| u8 **object_base, |
| enum i40e_hmc_lan_rsrc_type rsrc_type, |
| u32 obj_idx) |
| { |
| u32 obj_offset_in_sd, obj_offset_in_pd; |
| i40e_status ret_code = 0; |
| struct i40e_hmc_sd_entry *sd_entry; |
| struct i40e_hmc_pd_entry *pd_entry; |
| u32 pd_idx, pd_lmt, rel_pd_idx; |
| u64 obj_offset_in_fpm; |
| u32 sd_idx, sd_lmt; |
| |
| if (NULL == hmc_info) { |
| ret_code = I40E_ERR_BAD_PTR; |
| hw_dbg(hw, "i40e_hmc_get_object_va: bad hmc_info ptr\n"); |
| goto exit; |
| } |
| if (NULL == hmc_info->hmc_obj) { |
| ret_code = I40E_ERR_BAD_PTR; |
| hw_dbg(hw, "i40e_hmc_get_object_va: bad hmc_info->hmc_obj ptr\n"); |
| goto exit; |
| } |
| if (NULL == object_base) { |
| ret_code = I40E_ERR_BAD_PTR; |
| hw_dbg(hw, "i40e_hmc_get_object_va: bad object_base ptr\n"); |
| goto exit; |
| } |
| if (I40E_HMC_INFO_SIGNATURE != hmc_info->signature) { |
| ret_code = I40E_ERR_BAD_PTR; |
| hw_dbg(hw, "i40e_hmc_get_object_va: bad hmc_info->signature\n"); |
| goto exit; |
| } |
| if (obj_idx >= hmc_info->hmc_obj[rsrc_type].cnt) { |
| hw_dbg(hw, "i40e_hmc_get_object_va: returns error %d\n", |
| ret_code); |
| ret_code = I40E_ERR_INVALID_HMC_OBJ_INDEX; |
| goto exit; |
| } |
| /* find sd index and limit */ |
| I40E_FIND_SD_INDEX_LIMIT(hmc_info, rsrc_type, obj_idx, 1, |
| &sd_idx, &sd_lmt); |
| |
| sd_entry = &hmc_info->sd_table.sd_entry[sd_idx]; |
| obj_offset_in_fpm = hmc_info->hmc_obj[rsrc_type].base + |
| hmc_info->hmc_obj[rsrc_type].size * obj_idx; |
| |
| if (I40E_SD_TYPE_PAGED == sd_entry->entry_type) { |
| I40E_FIND_PD_INDEX_LIMIT(hmc_info, rsrc_type, obj_idx, 1, |
| &pd_idx, &pd_lmt); |
| rel_pd_idx = pd_idx % I40E_HMC_PD_CNT_IN_SD; |
| pd_entry = &sd_entry->u.pd_table.pd_entry[rel_pd_idx]; |
| obj_offset_in_pd = (u32)(obj_offset_in_fpm % |
| I40E_HMC_PAGED_BP_SIZE); |
| *object_base = (u8 *)pd_entry->bp.addr.va + obj_offset_in_pd; |
| } else { |
| obj_offset_in_sd = (u32)(obj_offset_in_fpm % |
| I40E_HMC_DIRECT_BP_SIZE); |
| *object_base = (u8 *)sd_entry->u.bp.addr.va + obj_offset_in_sd; |
| } |
| exit: |
| return ret_code; |
| } |
| |
| /** |
| * i40e_clear_lan_tx_queue_context - clear the HMC context for the queue |
| * @hw: the hardware struct |
| * @queue: the queue we care about |
| **/ |
| i40e_status i40e_clear_lan_tx_queue_context(struct i40e_hw *hw, |
| u16 queue) |
| { |
| i40e_status err; |
| u8 *context_bytes; |
| |
| err = i40e_hmc_get_object_va(&hw->hmc, &context_bytes, |
| I40E_HMC_LAN_TX, queue); |
| if (err < 0) |
| return err; |
| |
| return i40e_clear_hmc_context(hw, context_bytes, I40E_HMC_LAN_TX); |
| } |
| |
| /** |
| * i40e_set_lan_tx_queue_context - set the HMC context for the queue |
| * @hw: the hardware struct |
| * @queue: the queue we care about |
| * @s: the struct to be filled |
| **/ |
| i40e_status i40e_set_lan_tx_queue_context(struct i40e_hw *hw, |
| u16 queue, |
| struct i40e_hmc_obj_txq *s) |
| { |
| i40e_status err; |
| u8 *context_bytes; |
| |
| err = i40e_hmc_get_object_va(&hw->hmc, &context_bytes, |
| I40E_HMC_LAN_TX, queue); |
| if (err < 0) |
| return err; |
| |
| return i40e_set_hmc_context(context_bytes, |
| i40e_hmc_txq_ce_info, (u8 *)s); |
| } |
| |
| /** |
| * i40e_clear_lan_rx_queue_context - clear the HMC context for the queue |
| * @hw: the hardware struct |
| * @queue: the queue we care about |
| **/ |
| i40e_status i40e_clear_lan_rx_queue_context(struct i40e_hw *hw, |
| u16 queue) |
| { |
| i40e_status err; |
| u8 *context_bytes; |
| |
| err = i40e_hmc_get_object_va(&hw->hmc, &context_bytes, |
| I40E_HMC_LAN_RX, queue); |
| if (err < 0) |
| return err; |
| |
| return i40e_clear_hmc_context(hw, context_bytes, I40E_HMC_LAN_RX); |
| } |
| |
| /** |
| * i40e_set_lan_rx_queue_context - set the HMC context for the queue |
| * @hw: the hardware struct |
| * @queue: the queue we care about |
| * @s: the struct to be filled |
| **/ |
| i40e_status i40e_set_lan_rx_queue_context(struct i40e_hw *hw, |
| u16 queue, |
| struct i40e_hmc_obj_rxq *s) |
| { |
| i40e_status err; |
| u8 *context_bytes; |
| |
| err = i40e_hmc_get_object_va(&hw->hmc, &context_bytes, |
| I40E_HMC_LAN_RX, queue); |
| if (err < 0) |
| return err; |
| |
| return i40e_set_hmc_context(context_bytes, |
| i40e_hmc_rxq_ce_info, (u8 *)s); |
| } |