| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2009 Nokia Corporation |
| * Author: Tomi Valkeinen <tomi.valkeinen@ti.com> |
| * |
| * Some code and ideas taken from drivers/video/omap/ driver |
| * by Imre Deak. |
| */ |
| |
| #define DSS_SUBSYS_NAME "DSS" |
| |
| #include <linux/debugfs.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/io.h> |
| #include <linux/export.h> |
| #include <linux/err.h> |
| #include <linux/delay.h> |
| #include <linux/seq_file.h> |
| #include <linux/clk.h> |
| #include <linux/pinctrl/consumer.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/gfp.h> |
| #include <linux/sizes.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/regmap.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/of_graph.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/suspend.h> |
| #include <linux/component.h> |
| #include <linux/sys_soc.h> |
| |
| #include "omapdss.h" |
| #include "dss.h" |
| |
| struct dss_reg { |
| u16 idx; |
| }; |
| |
| #define DSS_REG(idx) ((const struct dss_reg) { idx }) |
| |
| #define DSS_REVISION DSS_REG(0x0000) |
| #define DSS_SYSCONFIG DSS_REG(0x0010) |
| #define DSS_SYSSTATUS DSS_REG(0x0014) |
| #define DSS_CONTROL DSS_REG(0x0040) |
| #define DSS_SDI_CONTROL DSS_REG(0x0044) |
| #define DSS_PLL_CONTROL DSS_REG(0x0048) |
| #define DSS_SDI_STATUS DSS_REG(0x005C) |
| |
| #define REG_GET(dss, idx, start, end) \ |
| FLD_GET(dss_read_reg(dss, idx), start, end) |
| |
| #define REG_FLD_MOD(dss, idx, val, start, end) \ |
| dss_write_reg(dss, idx, \ |
| FLD_MOD(dss_read_reg(dss, idx), val, start, end)) |
| |
| struct dss_ops { |
| int (*dpi_select_source)(struct dss_device *dss, int port, |
| enum omap_channel channel); |
| int (*select_lcd_source)(struct dss_device *dss, |
| enum omap_channel channel, |
| enum dss_clk_source clk_src); |
| }; |
| |
| struct dss_features { |
| enum dss_model model; |
| u8 fck_div_max; |
| unsigned int fck_freq_max; |
| u8 dss_fck_multiplier; |
| const char *parent_clk_name; |
| const enum omap_display_type *ports; |
| int num_ports; |
| const enum omap_dss_output_id *outputs; |
| const struct dss_ops *ops; |
| struct dss_reg_field dispc_clk_switch; |
| bool has_lcd_clk_src; |
| }; |
| |
| static const char * const dss_generic_clk_source_names[] = { |
| [DSS_CLK_SRC_FCK] = "FCK", |
| [DSS_CLK_SRC_PLL1_1] = "PLL1:1", |
| [DSS_CLK_SRC_PLL1_2] = "PLL1:2", |
| [DSS_CLK_SRC_PLL1_3] = "PLL1:3", |
| [DSS_CLK_SRC_PLL2_1] = "PLL2:1", |
| [DSS_CLK_SRC_PLL2_2] = "PLL2:2", |
| [DSS_CLK_SRC_PLL2_3] = "PLL2:3", |
| [DSS_CLK_SRC_HDMI_PLL] = "HDMI PLL", |
| }; |
| |
| static inline void dss_write_reg(struct dss_device *dss, |
| const struct dss_reg idx, u32 val) |
| { |
| __raw_writel(val, dss->base + idx.idx); |
| } |
| |
| static inline u32 dss_read_reg(struct dss_device *dss, const struct dss_reg idx) |
| { |
| return __raw_readl(dss->base + idx.idx); |
| } |
| |
| #define SR(dss, reg) \ |
| dss->ctx[(DSS_##reg).idx / sizeof(u32)] = dss_read_reg(dss, DSS_##reg) |
| #define RR(dss, reg) \ |
| dss_write_reg(dss, DSS_##reg, dss->ctx[(DSS_##reg).idx / sizeof(u32)]) |
| |
| static void dss_save_context(struct dss_device *dss) |
| { |
| DSSDBG("dss_save_context\n"); |
| |
| SR(dss, CONTROL); |
| |
| if (dss->feat->outputs[OMAP_DSS_CHANNEL_LCD] & OMAP_DSS_OUTPUT_SDI) { |
| SR(dss, SDI_CONTROL); |
| SR(dss, PLL_CONTROL); |
| } |
| |
| dss->ctx_valid = true; |
| |
| DSSDBG("context saved\n"); |
| } |
| |
| static void dss_restore_context(struct dss_device *dss) |
| { |
| DSSDBG("dss_restore_context\n"); |
| |
| if (!dss->ctx_valid) |
| return; |
| |
| RR(dss, CONTROL); |
| |
| if (dss->feat->outputs[OMAP_DSS_CHANNEL_LCD] & OMAP_DSS_OUTPUT_SDI) { |
| RR(dss, SDI_CONTROL); |
| RR(dss, PLL_CONTROL); |
| } |
| |
| DSSDBG("context restored\n"); |
| } |
| |
| #undef SR |
| #undef RR |
| |
| void dss_ctrl_pll_enable(struct dss_pll *pll, bool enable) |
| { |
| unsigned int shift; |
| unsigned int val; |
| |
| if (!pll->dss->syscon_pll_ctrl) |
| return; |
| |
| val = !enable; |
| |
| switch (pll->id) { |
| case DSS_PLL_VIDEO1: |
| shift = 0; |
| break; |
| case DSS_PLL_VIDEO2: |
| shift = 1; |
| break; |
| case DSS_PLL_HDMI: |
| shift = 2; |
| break; |
| default: |
| DSSERR("illegal DSS PLL ID %d\n", pll->id); |
| return; |
| } |
| |
| regmap_update_bits(pll->dss->syscon_pll_ctrl, |
| pll->dss->syscon_pll_ctrl_offset, |
| 1 << shift, val << shift); |
| } |
| |
| static int dss_ctrl_pll_set_control_mux(struct dss_device *dss, |
| enum dss_clk_source clk_src, |
| enum omap_channel channel) |
| { |
| unsigned int shift, val; |
| |
| if (!dss->syscon_pll_ctrl) |
| return -EINVAL; |
| |
| switch (channel) { |
| case OMAP_DSS_CHANNEL_LCD: |
| shift = 3; |
| |
| switch (clk_src) { |
| case DSS_CLK_SRC_PLL1_1: |
| val = 0; break; |
| case DSS_CLK_SRC_HDMI_PLL: |
| val = 1; break; |
| default: |
| DSSERR("error in PLL mux config for LCD\n"); |
| return -EINVAL; |
| } |
| |
| break; |
| case OMAP_DSS_CHANNEL_LCD2: |
| shift = 5; |
| |
| switch (clk_src) { |
| case DSS_CLK_SRC_PLL1_3: |
| val = 0; break; |
| case DSS_CLK_SRC_PLL2_3: |
| val = 1; break; |
| case DSS_CLK_SRC_HDMI_PLL: |
| val = 2; break; |
| default: |
| DSSERR("error in PLL mux config for LCD2\n"); |
| return -EINVAL; |
| } |
| |
| break; |
| case OMAP_DSS_CHANNEL_LCD3: |
| shift = 7; |
| |
| switch (clk_src) { |
| case DSS_CLK_SRC_PLL2_1: |
| val = 0; break; |
| case DSS_CLK_SRC_PLL1_3: |
| val = 1; break; |
| case DSS_CLK_SRC_HDMI_PLL: |
| val = 2; break; |
| default: |
| DSSERR("error in PLL mux config for LCD3\n"); |
| return -EINVAL; |
| } |
| |
| break; |
| default: |
| DSSERR("error in PLL mux config\n"); |
| return -EINVAL; |
| } |
| |
| regmap_update_bits(dss->syscon_pll_ctrl, dss->syscon_pll_ctrl_offset, |
| 0x3 << shift, val << shift); |
| |
| return 0; |
| } |
| |
| void dss_sdi_init(struct dss_device *dss, int datapairs) |
| { |
| u32 l; |
| |
| BUG_ON(datapairs > 3 || datapairs < 1); |
| |
| l = dss_read_reg(dss, DSS_SDI_CONTROL); |
| l = FLD_MOD(l, 0xf, 19, 15); /* SDI_PDIV */ |
| l = FLD_MOD(l, datapairs-1, 3, 2); /* SDI_PRSEL */ |
| l = FLD_MOD(l, 2, 1, 0); /* SDI_BWSEL */ |
| dss_write_reg(dss, DSS_SDI_CONTROL, l); |
| |
| l = dss_read_reg(dss, DSS_PLL_CONTROL); |
| l = FLD_MOD(l, 0x7, 25, 22); /* SDI_PLL_FREQSEL */ |
| l = FLD_MOD(l, 0xb, 16, 11); /* SDI_PLL_REGN */ |
| l = FLD_MOD(l, 0xb4, 10, 1); /* SDI_PLL_REGM */ |
| dss_write_reg(dss, DSS_PLL_CONTROL, l); |
| } |
| |
| int dss_sdi_enable(struct dss_device *dss) |
| { |
| unsigned long timeout; |
| |
| dispc_pck_free_enable(dss->dispc, 1); |
| |
| /* Reset SDI PLL */ |
| REG_FLD_MOD(dss, DSS_PLL_CONTROL, 1, 18, 18); /* SDI_PLL_SYSRESET */ |
| udelay(1); /* wait 2x PCLK */ |
| |
| /* Lock SDI PLL */ |
| REG_FLD_MOD(dss, DSS_PLL_CONTROL, 1, 28, 28); /* SDI_PLL_GOBIT */ |
| |
| /* Waiting for PLL lock request to complete */ |
| timeout = jiffies + msecs_to_jiffies(500); |
| while (dss_read_reg(dss, DSS_SDI_STATUS) & (1 << 6)) { |
| if (time_after_eq(jiffies, timeout)) { |
| DSSERR("PLL lock request timed out\n"); |
| goto err1; |
| } |
| } |
| |
| /* Clearing PLL_GO bit */ |
| REG_FLD_MOD(dss, DSS_PLL_CONTROL, 0, 28, 28); |
| |
| /* Waiting for PLL to lock */ |
| timeout = jiffies + msecs_to_jiffies(500); |
| while (!(dss_read_reg(dss, DSS_SDI_STATUS) & (1 << 5))) { |
| if (time_after_eq(jiffies, timeout)) { |
| DSSERR("PLL lock timed out\n"); |
| goto err1; |
| } |
| } |
| |
| dispc_lcd_enable_signal(dss->dispc, 1); |
| |
| /* Waiting for SDI reset to complete */ |
| timeout = jiffies + msecs_to_jiffies(500); |
| while (!(dss_read_reg(dss, DSS_SDI_STATUS) & (1 << 2))) { |
| if (time_after_eq(jiffies, timeout)) { |
| DSSERR("SDI reset timed out\n"); |
| goto err2; |
| } |
| } |
| |
| return 0; |
| |
| err2: |
| dispc_lcd_enable_signal(dss->dispc, 0); |
| err1: |
| /* Reset SDI PLL */ |
| REG_FLD_MOD(dss, DSS_PLL_CONTROL, 0, 18, 18); /* SDI_PLL_SYSRESET */ |
| |
| dispc_pck_free_enable(dss->dispc, 0); |
| |
| return -ETIMEDOUT; |
| } |
| |
| void dss_sdi_disable(struct dss_device *dss) |
| { |
| dispc_lcd_enable_signal(dss->dispc, 0); |
| |
| dispc_pck_free_enable(dss->dispc, 0); |
| |
| /* Reset SDI PLL */ |
| REG_FLD_MOD(dss, DSS_PLL_CONTROL, 0, 18, 18); /* SDI_PLL_SYSRESET */ |
| } |
| |
| const char *dss_get_clk_source_name(enum dss_clk_source clk_src) |
| { |
| return dss_generic_clk_source_names[clk_src]; |
| } |
| |
| static void dss_dump_clocks(struct dss_device *dss, struct seq_file *s) |
| { |
| const char *fclk_name; |
| unsigned long fclk_rate; |
| |
| if (dss_runtime_get(dss)) |
| return; |
| |
| seq_printf(s, "- DSS -\n"); |
| |
| fclk_name = dss_get_clk_source_name(DSS_CLK_SRC_FCK); |
| fclk_rate = clk_get_rate(dss->dss_clk); |
| |
| seq_printf(s, "%s = %lu\n", |
| fclk_name, |
| fclk_rate); |
| |
| dss_runtime_put(dss); |
| } |
| |
| static int dss_dump_regs(struct seq_file *s, void *p) |
| { |
| struct dss_device *dss = s->private; |
| |
| #define DUMPREG(dss, r) seq_printf(s, "%-35s %08x\n", #r, dss_read_reg(dss, r)) |
| |
| if (dss_runtime_get(dss)) |
| return 0; |
| |
| DUMPREG(dss, DSS_REVISION); |
| DUMPREG(dss, DSS_SYSCONFIG); |
| DUMPREG(dss, DSS_SYSSTATUS); |
| DUMPREG(dss, DSS_CONTROL); |
| |
| if (dss->feat->outputs[OMAP_DSS_CHANNEL_LCD] & OMAP_DSS_OUTPUT_SDI) { |
| DUMPREG(dss, DSS_SDI_CONTROL); |
| DUMPREG(dss, DSS_PLL_CONTROL); |
| DUMPREG(dss, DSS_SDI_STATUS); |
| } |
| |
| dss_runtime_put(dss); |
| #undef DUMPREG |
| return 0; |
| } |
| |
| static int dss_debug_dump_clocks(struct seq_file *s, void *p) |
| { |
| struct dss_device *dss = s->private; |
| |
| dss_dump_clocks(dss, s); |
| dispc_dump_clocks(dss->dispc, s); |
| return 0; |
| } |
| |
| static int dss_get_channel_index(enum omap_channel channel) |
| { |
| switch (channel) { |
| case OMAP_DSS_CHANNEL_LCD: |
| return 0; |
| case OMAP_DSS_CHANNEL_LCD2: |
| return 1; |
| case OMAP_DSS_CHANNEL_LCD3: |
| return 2; |
| default: |
| WARN_ON(1); |
| return 0; |
| } |
| } |
| |
| static void dss_select_dispc_clk_source(struct dss_device *dss, |
| enum dss_clk_source clk_src) |
| { |
| int b; |
| |
| /* |
| * We always use PRCM clock as the DISPC func clock, except on DSS3, |
| * where we don't have separate DISPC and LCD clock sources. |
| */ |
| if (WARN_ON(dss->feat->has_lcd_clk_src && clk_src != DSS_CLK_SRC_FCK)) |
| return; |
| |
| switch (clk_src) { |
| case DSS_CLK_SRC_FCK: |
| b = 0; |
| break; |
| case DSS_CLK_SRC_PLL1_1: |
| b = 1; |
| break; |
| case DSS_CLK_SRC_PLL2_1: |
| b = 2; |
| break; |
| default: |
| BUG(); |
| return; |
| } |
| |
| REG_FLD_MOD(dss, DSS_CONTROL, b, /* DISPC_CLK_SWITCH */ |
| dss->feat->dispc_clk_switch.start, |
| dss->feat->dispc_clk_switch.end); |
| |
| dss->dispc_clk_source = clk_src; |
| } |
| |
| void dss_select_dsi_clk_source(struct dss_device *dss, int dsi_module, |
| enum dss_clk_source clk_src) |
| { |
| int b, pos; |
| |
| switch (clk_src) { |
| case DSS_CLK_SRC_FCK: |
| b = 0; |
| break; |
| case DSS_CLK_SRC_PLL1_2: |
| BUG_ON(dsi_module != 0); |
| b = 1; |
| break; |
| case DSS_CLK_SRC_PLL2_2: |
| BUG_ON(dsi_module != 1); |
| b = 1; |
| break; |
| default: |
| BUG(); |
| return; |
| } |
| |
| pos = dsi_module == 0 ? 1 : 10; |
| REG_FLD_MOD(dss, DSS_CONTROL, b, pos, pos); /* DSIx_CLK_SWITCH */ |
| |
| dss->dsi_clk_source[dsi_module] = clk_src; |
| } |
| |
| static int dss_lcd_clk_mux_dra7(struct dss_device *dss, |
| enum omap_channel channel, |
| enum dss_clk_source clk_src) |
| { |
| const u8 ctrl_bits[] = { |
| [OMAP_DSS_CHANNEL_LCD] = 0, |
| [OMAP_DSS_CHANNEL_LCD2] = 12, |
| [OMAP_DSS_CHANNEL_LCD3] = 19, |
| }; |
| |
| u8 ctrl_bit = ctrl_bits[channel]; |
| int r; |
| |
| if (clk_src == DSS_CLK_SRC_FCK) { |
| /* LCDx_CLK_SWITCH */ |
| REG_FLD_MOD(dss, DSS_CONTROL, 0, ctrl_bit, ctrl_bit); |
| return -EINVAL; |
| } |
| |
| r = dss_ctrl_pll_set_control_mux(dss, clk_src, channel); |
| if (r) |
| return r; |
| |
| REG_FLD_MOD(dss, DSS_CONTROL, 1, ctrl_bit, ctrl_bit); |
| |
| return 0; |
| } |
| |
| static int dss_lcd_clk_mux_omap5(struct dss_device *dss, |
| enum omap_channel channel, |
| enum dss_clk_source clk_src) |
| { |
| const u8 ctrl_bits[] = { |
| [OMAP_DSS_CHANNEL_LCD] = 0, |
| [OMAP_DSS_CHANNEL_LCD2] = 12, |
| [OMAP_DSS_CHANNEL_LCD3] = 19, |
| }; |
| const enum dss_clk_source allowed_plls[] = { |
| [OMAP_DSS_CHANNEL_LCD] = DSS_CLK_SRC_PLL1_1, |
| [OMAP_DSS_CHANNEL_LCD2] = DSS_CLK_SRC_FCK, |
| [OMAP_DSS_CHANNEL_LCD3] = DSS_CLK_SRC_PLL2_1, |
| }; |
| |
| u8 ctrl_bit = ctrl_bits[channel]; |
| |
| if (clk_src == DSS_CLK_SRC_FCK) { |
| /* LCDx_CLK_SWITCH */ |
| REG_FLD_MOD(dss, DSS_CONTROL, 0, ctrl_bit, ctrl_bit); |
| return -EINVAL; |
| } |
| |
| if (WARN_ON(allowed_plls[channel] != clk_src)) |
| return -EINVAL; |
| |
| REG_FLD_MOD(dss, DSS_CONTROL, 1, ctrl_bit, ctrl_bit); |
| |
| return 0; |
| } |
| |
| static int dss_lcd_clk_mux_omap4(struct dss_device *dss, |
| enum omap_channel channel, |
| enum dss_clk_source clk_src) |
| { |
| const u8 ctrl_bits[] = { |
| [OMAP_DSS_CHANNEL_LCD] = 0, |
| [OMAP_DSS_CHANNEL_LCD2] = 12, |
| }; |
| const enum dss_clk_source allowed_plls[] = { |
| [OMAP_DSS_CHANNEL_LCD] = DSS_CLK_SRC_PLL1_1, |
| [OMAP_DSS_CHANNEL_LCD2] = DSS_CLK_SRC_PLL2_1, |
| }; |
| |
| u8 ctrl_bit = ctrl_bits[channel]; |
| |
| if (clk_src == DSS_CLK_SRC_FCK) { |
| /* LCDx_CLK_SWITCH */ |
| REG_FLD_MOD(dss, DSS_CONTROL, 0, ctrl_bit, ctrl_bit); |
| return 0; |
| } |
| |
| if (WARN_ON(allowed_plls[channel] != clk_src)) |
| return -EINVAL; |
| |
| REG_FLD_MOD(dss, DSS_CONTROL, 1, ctrl_bit, ctrl_bit); |
| |
| return 0; |
| } |
| |
| void dss_select_lcd_clk_source(struct dss_device *dss, |
| enum omap_channel channel, |
| enum dss_clk_source clk_src) |
| { |
| int idx = dss_get_channel_index(channel); |
| int r; |
| |
| if (!dss->feat->has_lcd_clk_src) { |
| dss_select_dispc_clk_source(dss, clk_src); |
| dss->lcd_clk_source[idx] = clk_src; |
| return; |
| } |
| |
| r = dss->feat->ops->select_lcd_source(dss, channel, clk_src); |
| if (r) |
| return; |
| |
| dss->lcd_clk_source[idx] = clk_src; |
| } |
| |
| enum dss_clk_source dss_get_dispc_clk_source(struct dss_device *dss) |
| { |
| return dss->dispc_clk_source; |
| } |
| |
| enum dss_clk_source dss_get_dsi_clk_source(struct dss_device *dss, |
| int dsi_module) |
| { |
| return dss->dsi_clk_source[dsi_module]; |
| } |
| |
| enum dss_clk_source dss_get_lcd_clk_source(struct dss_device *dss, |
| enum omap_channel channel) |
| { |
| if (dss->feat->has_lcd_clk_src) { |
| int idx = dss_get_channel_index(channel); |
| return dss->lcd_clk_source[idx]; |
| } else { |
| /* LCD_CLK source is the same as DISPC_FCLK source for |
| * OMAP2 and OMAP3 */ |
| return dss->dispc_clk_source; |
| } |
| } |
| |
| bool dss_div_calc(struct dss_device *dss, unsigned long pck, |
| unsigned long fck_min, dss_div_calc_func func, void *data) |
| { |
| int fckd, fckd_start, fckd_stop; |
| unsigned long fck; |
| unsigned long fck_hw_max; |
| unsigned long fckd_hw_max; |
| unsigned long prate; |
| unsigned int m; |
| |
| fck_hw_max = dss->feat->fck_freq_max; |
| |
| if (dss->parent_clk == NULL) { |
| unsigned int pckd; |
| |
| pckd = fck_hw_max / pck; |
| |
| fck = pck * pckd; |
| |
| fck = clk_round_rate(dss->dss_clk, fck); |
| |
| return func(fck, data); |
| } |
| |
| fckd_hw_max = dss->feat->fck_div_max; |
| |
| m = dss->feat->dss_fck_multiplier; |
| prate = clk_get_rate(dss->parent_clk); |
| |
| fck_min = fck_min ? fck_min : 1; |
| |
| fckd_start = min(prate * m / fck_min, fckd_hw_max); |
| fckd_stop = max(DIV_ROUND_UP(prate * m, fck_hw_max), 1ul); |
| |
| for (fckd = fckd_start; fckd >= fckd_stop; --fckd) { |
| fck = DIV_ROUND_UP(prate, fckd) * m; |
| |
| if (func(fck, data)) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| int dss_set_fck_rate(struct dss_device *dss, unsigned long rate) |
| { |
| int r; |
| |
| DSSDBG("set fck to %lu\n", rate); |
| |
| r = clk_set_rate(dss->dss_clk, rate); |
| if (r) |
| return r; |
| |
| dss->dss_clk_rate = clk_get_rate(dss->dss_clk); |
| |
| WARN_ONCE(dss->dss_clk_rate != rate, "clk rate mismatch: %lu != %lu", |
| dss->dss_clk_rate, rate); |
| |
| return 0; |
| } |
| |
| unsigned long dss_get_dispc_clk_rate(struct dss_device *dss) |
| { |
| return dss->dss_clk_rate; |
| } |
| |
| unsigned long dss_get_max_fck_rate(struct dss_device *dss) |
| { |
| return dss->feat->fck_freq_max; |
| } |
| |
| static int dss_setup_default_clock(struct dss_device *dss) |
| { |
| unsigned long max_dss_fck, prate; |
| unsigned long fck; |
| unsigned int fck_div; |
| int r; |
| |
| max_dss_fck = dss->feat->fck_freq_max; |
| |
| if (dss->parent_clk == NULL) { |
| fck = clk_round_rate(dss->dss_clk, max_dss_fck); |
| } else { |
| prate = clk_get_rate(dss->parent_clk); |
| |
| fck_div = DIV_ROUND_UP(prate * dss->feat->dss_fck_multiplier, |
| max_dss_fck); |
| fck = DIV_ROUND_UP(prate, fck_div) |
| * dss->feat->dss_fck_multiplier; |
| } |
| |
| r = dss_set_fck_rate(dss, fck); |
| if (r) |
| return r; |
| |
| return 0; |
| } |
| |
| void dss_set_venc_output(struct dss_device *dss, enum omap_dss_venc_type type) |
| { |
| int l = 0; |
| |
| if (type == OMAP_DSS_VENC_TYPE_COMPOSITE) |
| l = 0; |
| else if (type == OMAP_DSS_VENC_TYPE_SVIDEO) |
| l = 1; |
| else |
| BUG(); |
| |
| /* venc out selection. 0 = comp, 1 = svideo */ |
| REG_FLD_MOD(dss, DSS_CONTROL, l, 6, 6); |
| } |
| |
| void dss_set_dac_pwrdn_bgz(struct dss_device *dss, bool enable) |
| { |
| /* DAC Power-Down Control */ |
| REG_FLD_MOD(dss, DSS_CONTROL, enable, 5, 5); |
| } |
| |
| void dss_select_hdmi_venc_clk_source(struct dss_device *dss, |
| enum dss_hdmi_venc_clk_source_select src) |
| { |
| enum omap_dss_output_id outputs; |
| |
| outputs = dss->feat->outputs[OMAP_DSS_CHANNEL_DIGIT]; |
| |
| /* Complain about invalid selections */ |
| WARN_ON((src == DSS_VENC_TV_CLK) && !(outputs & OMAP_DSS_OUTPUT_VENC)); |
| WARN_ON((src == DSS_HDMI_M_PCLK) && !(outputs & OMAP_DSS_OUTPUT_HDMI)); |
| |
| /* Select only if we have options */ |
| if ((outputs & OMAP_DSS_OUTPUT_VENC) && |
| (outputs & OMAP_DSS_OUTPUT_HDMI)) |
| /* VENC_HDMI_SWITCH */ |
| REG_FLD_MOD(dss, DSS_CONTROL, src, 15, 15); |
| } |
| |
| static int dss_dpi_select_source_omap2_omap3(struct dss_device *dss, int port, |
| enum omap_channel channel) |
| { |
| if (channel != OMAP_DSS_CHANNEL_LCD) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int dss_dpi_select_source_omap4(struct dss_device *dss, int port, |
| enum omap_channel channel) |
| { |
| int val; |
| |
| switch (channel) { |
| case OMAP_DSS_CHANNEL_LCD2: |
| val = 0; |
| break; |
| case OMAP_DSS_CHANNEL_DIGIT: |
| val = 1; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| REG_FLD_MOD(dss, DSS_CONTROL, val, 17, 17); |
| |
| return 0; |
| } |
| |
| static int dss_dpi_select_source_omap5(struct dss_device *dss, int port, |
| enum omap_channel channel) |
| { |
| int val; |
| |
| switch (channel) { |
| case OMAP_DSS_CHANNEL_LCD: |
| val = 1; |
| break; |
| case OMAP_DSS_CHANNEL_LCD2: |
| val = 2; |
| break; |
| case OMAP_DSS_CHANNEL_LCD3: |
| val = 3; |
| break; |
| case OMAP_DSS_CHANNEL_DIGIT: |
| val = 0; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| REG_FLD_MOD(dss, DSS_CONTROL, val, 17, 16); |
| |
| return 0; |
| } |
| |
| static int dss_dpi_select_source_dra7xx(struct dss_device *dss, int port, |
| enum omap_channel channel) |
| { |
| switch (port) { |
| case 0: |
| return dss_dpi_select_source_omap5(dss, port, channel); |
| case 1: |
| if (channel != OMAP_DSS_CHANNEL_LCD2) |
| return -EINVAL; |
| break; |
| case 2: |
| if (channel != OMAP_DSS_CHANNEL_LCD3) |
| return -EINVAL; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| int dss_dpi_select_source(struct dss_device *dss, int port, |
| enum omap_channel channel) |
| { |
| return dss->feat->ops->dpi_select_source(dss, port, channel); |
| } |
| |
| static int dss_get_clocks(struct dss_device *dss) |
| { |
| struct clk *clk; |
| |
| clk = devm_clk_get(&dss->pdev->dev, "fck"); |
| if (IS_ERR(clk)) { |
| DSSERR("can't get clock fck\n"); |
| return PTR_ERR(clk); |
| } |
| |
| dss->dss_clk = clk; |
| |
| if (dss->feat->parent_clk_name) { |
| clk = clk_get(NULL, dss->feat->parent_clk_name); |
| if (IS_ERR(clk)) { |
| DSSERR("Failed to get %s\n", |
| dss->feat->parent_clk_name); |
| return PTR_ERR(clk); |
| } |
| } else { |
| clk = NULL; |
| } |
| |
| dss->parent_clk = clk; |
| |
| return 0; |
| } |
| |
| static void dss_put_clocks(struct dss_device *dss) |
| { |
| if (dss->parent_clk) |
| clk_put(dss->parent_clk); |
| } |
| |
| int dss_runtime_get(struct dss_device *dss) |
| { |
| int r; |
| |
| DSSDBG("dss_runtime_get\n"); |
| |
| r = pm_runtime_get_sync(&dss->pdev->dev); |
| WARN_ON(r < 0); |
| return r < 0 ? r : 0; |
| } |
| |
| void dss_runtime_put(struct dss_device *dss) |
| { |
| int r; |
| |
| DSSDBG("dss_runtime_put\n"); |
| |
| r = pm_runtime_put_sync(&dss->pdev->dev); |
| WARN_ON(r < 0 && r != -ENOSYS && r != -EBUSY); |
| } |
| |
| struct dss_device *dss_get_device(struct device *dev) |
| { |
| return dev_get_drvdata(dev); |
| } |
| |
| /* DEBUGFS */ |
| #if defined(CONFIG_OMAP2_DSS_DEBUGFS) |
| static int dss_initialize_debugfs(struct dss_device *dss) |
| { |
| struct dentry *dir; |
| |
| dir = debugfs_create_dir("omapdss", NULL); |
| if (IS_ERR(dir)) |
| return PTR_ERR(dir); |
| |
| dss->debugfs.root = dir; |
| |
| return 0; |
| } |
| |
| static void dss_uninitialize_debugfs(struct dss_device *dss) |
| { |
| debugfs_remove_recursive(dss->debugfs.root); |
| } |
| |
| struct dss_debugfs_entry { |
| struct dentry *dentry; |
| int (*show_fn)(struct seq_file *s, void *data); |
| void *data; |
| }; |
| |
| static int dss_debug_open(struct inode *inode, struct file *file) |
| { |
| struct dss_debugfs_entry *entry = inode->i_private; |
| |
| return single_open(file, entry->show_fn, entry->data); |
| } |
| |
| static const struct file_operations dss_debug_fops = { |
| .open = dss_debug_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| struct dss_debugfs_entry * |
| dss_debugfs_create_file(struct dss_device *dss, const char *name, |
| int (*show_fn)(struct seq_file *s, void *data), |
| void *data) |
| { |
| struct dss_debugfs_entry *entry; |
| |
| entry = kzalloc(sizeof(*entry), GFP_KERNEL); |
| if (!entry) |
| return ERR_PTR(-ENOMEM); |
| |
| entry->show_fn = show_fn; |
| entry->data = data; |
| entry->dentry = debugfs_create_file(name, 0444, dss->debugfs.root, |
| entry, &dss_debug_fops); |
| |
| return entry; |
| } |
| |
| void dss_debugfs_remove_file(struct dss_debugfs_entry *entry) |
| { |
| if (IS_ERR_OR_NULL(entry)) |
| return; |
| |
| debugfs_remove(entry->dentry); |
| kfree(entry); |
| } |
| |
| #else /* CONFIG_OMAP2_DSS_DEBUGFS */ |
| static inline int dss_initialize_debugfs(struct dss_device *dss) |
| { |
| return 0; |
| } |
| static inline void dss_uninitialize_debugfs(struct dss_device *dss) |
| { |
| } |
| #endif /* CONFIG_OMAP2_DSS_DEBUGFS */ |
| |
| static const struct dss_ops dss_ops_omap2_omap3 = { |
| .dpi_select_source = &dss_dpi_select_source_omap2_omap3, |
| }; |
| |
| static const struct dss_ops dss_ops_omap4 = { |
| .dpi_select_source = &dss_dpi_select_source_omap4, |
| .select_lcd_source = &dss_lcd_clk_mux_omap4, |
| }; |
| |
| static const struct dss_ops dss_ops_omap5 = { |
| .dpi_select_source = &dss_dpi_select_source_omap5, |
| .select_lcd_source = &dss_lcd_clk_mux_omap5, |
| }; |
| |
| static const struct dss_ops dss_ops_dra7 = { |
| .dpi_select_source = &dss_dpi_select_source_dra7xx, |
| .select_lcd_source = &dss_lcd_clk_mux_dra7, |
| }; |
| |
| static const enum omap_display_type omap2plus_ports[] = { |
| OMAP_DISPLAY_TYPE_DPI, |
| }; |
| |
| static const enum omap_display_type omap34xx_ports[] = { |
| OMAP_DISPLAY_TYPE_DPI, |
| OMAP_DISPLAY_TYPE_SDI, |
| }; |
| |
| static const enum omap_display_type dra7xx_ports[] = { |
| OMAP_DISPLAY_TYPE_DPI, |
| OMAP_DISPLAY_TYPE_DPI, |
| OMAP_DISPLAY_TYPE_DPI, |
| }; |
| |
| static const enum omap_dss_output_id omap2_dss_supported_outputs[] = { |
| /* OMAP_DSS_CHANNEL_LCD */ |
| OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI, |
| |
| /* OMAP_DSS_CHANNEL_DIGIT */ |
| OMAP_DSS_OUTPUT_VENC, |
| }; |
| |
| static const enum omap_dss_output_id omap3430_dss_supported_outputs[] = { |
| /* OMAP_DSS_CHANNEL_LCD */ |
| OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI | |
| OMAP_DSS_OUTPUT_SDI | OMAP_DSS_OUTPUT_DSI1, |
| |
| /* OMAP_DSS_CHANNEL_DIGIT */ |
| OMAP_DSS_OUTPUT_VENC, |
| }; |
| |
| static const enum omap_dss_output_id omap3630_dss_supported_outputs[] = { |
| /* OMAP_DSS_CHANNEL_LCD */ |
| OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI | |
| OMAP_DSS_OUTPUT_DSI1, |
| |
| /* OMAP_DSS_CHANNEL_DIGIT */ |
| OMAP_DSS_OUTPUT_VENC, |
| }; |
| |
| static const enum omap_dss_output_id am43xx_dss_supported_outputs[] = { |
| /* OMAP_DSS_CHANNEL_LCD */ |
| OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI, |
| }; |
| |
| static const enum omap_dss_output_id omap4_dss_supported_outputs[] = { |
| /* OMAP_DSS_CHANNEL_LCD */ |
| OMAP_DSS_OUTPUT_DBI | OMAP_DSS_OUTPUT_DSI1, |
| |
| /* OMAP_DSS_CHANNEL_DIGIT */ |
| OMAP_DSS_OUTPUT_VENC | OMAP_DSS_OUTPUT_HDMI, |
| |
| /* OMAP_DSS_CHANNEL_LCD2 */ |
| OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI | |
| OMAP_DSS_OUTPUT_DSI2, |
| }; |
| |
| static const enum omap_dss_output_id omap5_dss_supported_outputs[] = { |
| /* OMAP_DSS_CHANNEL_LCD */ |
| OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI | |
| OMAP_DSS_OUTPUT_DSI1 | OMAP_DSS_OUTPUT_DSI2, |
| |
| /* OMAP_DSS_CHANNEL_DIGIT */ |
| OMAP_DSS_OUTPUT_HDMI, |
| |
| /* OMAP_DSS_CHANNEL_LCD2 */ |
| OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI | |
| OMAP_DSS_OUTPUT_DSI1, |
| |
| /* OMAP_DSS_CHANNEL_LCD3 */ |
| OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI | |
| OMAP_DSS_OUTPUT_DSI2, |
| }; |
| |
| static const struct dss_features omap24xx_dss_feats = { |
| .model = DSS_MODEL_OMAP2, |
| /* |
| * fck div max is really 16, but the divider range has gaps. The range |
| * from 1 to 6 has no gaps, so let's use that as a max. |
| */ |
| .fck_div_max = 6, |
| .fck_freq_max = 133000000, |
| .dss_fck_multiplier = 2, |
| .parent_clk_name = "core_ck", |
| .ports = omap2plus_ports, |
| .num_ports = ARRAY_SIZE(omap2plus_ports), |
| .outputs = omap2_dss_supported_outputs, |
| .ops = &dss_ops_omap2_omap3, |
| .dispc_clk_switch = { 0, 0 }, |
| .has_lcd_clk_src = false, |
| }; |
| |
| static const struct dss_features omap34xx_dss_feats = { |
| .model = DSS_MODEL_OMAP3, |
| .fck_div_max = 16, |
| .fck_freq_max = 173000000, |
| .dss_fck_multiplier = 2, |
| .parent_clk_name = "dpll4_ck", |
| .ports = omap34xx_ports, |
| .outputs = omap3430_dss_supported_outputs, |
| .num_ports = ARRAY_SIZE(omap34xx_ports), |
| .ops = &dss_ops_omap2_omap3, |
| .dispc_clk_switch = { 0, 0 }, |
| .has_lcd_clk_src = false, |
| }; |
| |
| static const struct dss_features omap3630_dss_feats = { |
| .model = DSS_MODEL_OMAP3, |
| .fck_div_max = 31, |
| .fck_freq_max = 173000000, |
| .dss_fck_multiplier = 1, |
| .parent_clk_name = "dpll4_ck", |
| .ports = omap2plus_ports, |
| .num_ports = ARRAY_SIZE(omap2plus_ports), |
| .outputs = omap3630_dss_supported_outputs, |
| .ops = &dss_ops_omap2_omap3, |
| .dispc_clk_switch = { 0, 0 }, |
| .has_lcd_clk_src = false, |
| }; |
| |
| static const struct dss_features omap44xx_dss_feats = { |
| .model = DSS_MODEL_OMAP4, |
| .fck_div_max = 32, |
| .fck_freq_max = 186000000, |
| .dss_fck_multiplier = 1, |
| .parent_clk_name = "dpll_per_x2_ck", |
| .ports = omap2plus_ports, |
| .num_ports = ARRAY_SIZE(omap2plus_ports), |
| .outputs = omap4_dss_supported_outputs, |
| .ops = &dss_ops_omap4, |
| .dispc_clk_switch = { 9, 8 }, |
| .has_lcd_clk_src = true, |
| }; |
| |
| static const struct dss_features omap54xx_dss_feats = { |
| .model = DSS_MODEL_OMAP5, |
| .fck_div_max = 64, |
| .fck_freq_max = 209250000, |
| .dss_fck_multiplier = 1, |
| .parent_clk_name = "dpll_per_x2_ck", |
| .ports = omap2plus_ports, |
| .num_ports = ARRAY_SIZE(omap2plus_ports), |
| .outputs = omap5_dss_supported_outputs, |
| .ops = &dss_ops_omap5, |
| .dispc_clk_switch = { 9, 7 }, |
| .has_lcd_clk_src = true, |
| }; |
| |
| static const struct dss_features am43xx_dss_feats = { |
| .model = DSS_MODEL_OMAP3, |
| .fck_div_max = 0, |
| .fck_freq_max = 200000000, |
| .dss_fck_multiplier = 0, |
| .parent_clk_name = NULL, |
| .ports = omap2plus_ports, |
| .num_ports = ARRAY_SIZE(omap2plus_ports), |
| .outputs = am43xx_dss_supported_outputs, |
| .ops = &dss_ops_omap2_omap3, |
| .dispc_clk_switch = { 0, 0 }, |
| .has_lcd_clk_src = true, |
| }; |
| |
| static const struct dss_features dra7xx_dss_feats = { |
| .model = DSS_MODEL_DRA7, |
| .fck_div_max = 64, |
| .fck_freq_max = 209250000, |
| .dss_fck_multiplier = 1, |
| .parent_clk_name = "dpll_per_x2_ck", |
| .ports = dra7xx_ports, |
| .num_ports = ARRAY_SIZE(dra7xx_ports), |
| .outputs = omap5_dss_supported_outputs, |
| .ops = &dss_ops_dra7, |
| .dispc_clk_switch = { 9, 7 }, |
| .has_lcd_clk_src = true, |
| }; |
| |
| static void __dss_uninit_ports(struct dss_device *dss, unsigned int num_ports) |
| { |
| struct platform_device *pdev = dss->pdev; |
| struct device_node *parent = pdev->dev.of_node; |
| struct device_node *port; |
| unsigned int i; |
| |
| for (i = 0; i < num_ports; i++) { |
| port = of_graph_get_port_by_id(parent, i); |
| if (!port) |
| continue; |
| |
| switch (dss->feat->ports[i]) { |
| case OMAP_DISPLAY_TYPE_DPI: |
| dpi_uninit_port(port); |
| break; |
| case OMAP_DISPLAY_TYPE_SDI: |
| sdi_uninit_port(port); |
| break; |
| default: |
| break; |
| } |
| } |
| } |
| |
| static int dss_init_ports(struct dss_device *dss) |
| { |
| struct platform_device *pdev = dss->pdev; |
| struct device_node *parent = pdev->dev.of_node; |
| struct device_node *port; |
| unsigned int i; |
| int r; |
| |
| for (i = 0; i < dss->feat->num_ports; i++) { |
| port = of_graph_get_port_by_id(parent, i); |
| if (!port) |
| continue; |
| |
| switch (dss->feat->ports[i]) { |
| case OMAP_DISPLAY_TYPE_DPI: |
| r = dpi_init_port(dss, pdev, port, dss->feat->model); |
| if (r) |
| goto error; |
| break; |
| |
| case OMAP_DISPLAY_TYPE_SDI: |
| r = sdi_init_port(dss, pdev, port); |
| if (r) |
| goto error; |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| return 0; |
| |
| error: |
| __dss_uninit_ports(dss, i); |
| return r; |
| } |
| |
| static void dss_uninit_ports(struct dss_device *dss) |
| { |
| __dss_uninit_ports(dss, dss->feat->num_ports); |
| } |
| |
| static int dss_video_pll_probe(struct dss_device *dss) |
| { |
| struct platform_device *pdev = dss->pdev; |
| struct device_node *np = pdev->dev.of_node; |
| struct regulator *pll_regulator; |
| int r; |
| |
| if (!np) |
| return 0; |
| |
| if (of_property_read_bool(np, "syscon-pll-ctrl")) { |
| dss->syscon_pll_ctrl = syscon_regmap_lookup_by_phandle(np, |
| "syscon-pll-ctrl"); |
| if (IS_ERR(dss->syscon_pll_ctrl)) { |
| dev_err(&pdev->dev, |
| "failed to get syscon-pll-ctrl regmap\n"); |
| return PTR_ERR(dss->syscon_pll_ctrl); |
| } |
| |
| if (of_property_read_u32_index(np, "syscon-pll-ctrl", 1, |
| &dss->syscon_pll_ctrl_offset)) { |
| dev_err(&pdev->dev, |
| "failed to get syscon-pll-ctrl offset\n"); |
| return -EINVAL; |
| } |
| } |
| |
| pll_regulator = devm_regulator_get(&pdev->dev, "vdda_video"); |
| if (IS_ERR(pll_regulator)) { |
| r = PTR_ERR(pll_regulator); |
| |
| switch (r) { |
| case -ENOENT: |
| pll_regulator = NULL; |
| break; |
| |
| case -EPROBE_DEFER: |
| return -EPROBE_DEFER; |
| |
| default: |
| DSSERR("can't get DPLL VDDA regulator\n"); |
| return r; |
| } |
| } |
| |
| if (of_property_match_string(np, "reg-names", "pll1") >= 0) { |
| dss->video1_pll = dss_video_pll_init(dss, pdev, 0, |
| pll_regulator); |
| if (IS_ERR(dss->video1_pll)) |
| return PTR_ERR(dss->video1_pll); |
| } |
| |
| if (of_property_match_string(np, "reg-names", "pll2") >= 0) { |
| dss->video2_pll = dss_video_pll_init(dss, pdev, 1, |
| pll_regulator); |
| if (IS_ERR(dss->video2_pll)) { |
| dss_video_pll_uninit(dss->video1_pll); |
| return PTR_ERR(dss->video2_pll); |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* DSS HW IP initialisation */ |
| static const struct of_device_id dss_of_match[] = { |
| { .compatible = "ti,omap2-dss", .data = &omap24xx_dss_feats }, |
| { .compatible = "ti,omap3-dss", .data = &omap3630_dss_feats }, |
| { .compatible = "ti,omap4-dss", .data = &omap44xx_dss_feats }, |
| { .compatible = "ti,omap5-dss", .data = &omap54xx_dss_feats }, |
| { .compatible = "ti,dra7-dss", .data = &dra7xx_dss_feats }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, dss_of_match); |
| |
| static const struct soc_device_attribute dss_soc_devices[] = { |
| { .machine = "OMAP3430/3530", .data = &omap34xx_dss_feats }, |
| { .machine = "AM35??", .data = &omap34xx_dss_feats }, |
| { .family = "AM43xx", .data = &am43xx_dss_feats }, |
| { /* sentinel */ } |
| }; |
| |
| static int dss_bind(struct device *dev) |
| { |
| struct dss_device *dss = dev_get_drvdata(dev); |
| struct platform_device *drm_pdev; |
| int r; |
| |
| r = component_bind_all(dev, NULL); |
| if (r) |
| return r; |
| |
| pm_set_vt_switch(0); |
| |
| omapdss_set_dss(dss); |
| |
| drm_pdev = platform_device_register_simple("omapdrm", 0, NULL, 0); |
| if (IS_ERR(drm_pdev)) { |
| component_unbind_all(dev, NULL); |
| return PTR_ERR(drm_pdev); |
| } |
| |
| dss->drm_pdev = drm_pdev; |
| |
| return 0; |
| } |
| |
| static void dss_unbind(struct device *dev) |
| { |
| struct dss_device *dss = dev_get_drvdata(dev); |
| |
| platform_device_unregister(dss->drm_pdev); |
| |
| omapdss_set_dss(NULL); |
| |
| component_unbind_all(dev, NULL); |
| } |
| |
| static const struct component_master_ops dss_component_ops = { |
| .bind = dss_bind, |
| .unbind = dss_unbind, |
| }; |
| |
| static int dss_component_compare(struct device *dev, void *data) |
| { |
| struct device *child = data; |
| return dev == child; |
| } |
| |
| struct dss_component_match_data { |
| struct device *dev; |
| struct component_match **match; |
| }; |
| |
| static int dss_add_child_component(struct device *dev, void *data) |
| { |
| struct dss_component_match_data *cmatch = data; |
| struct component_match **match = cmatch->match; |
| |
| /* |
| * HACK |
| * We don't have a working driver for rfbi, so skip it here always. |
| * Otherwise dss will never get probed successfully, as it will wait |
| * for rfbi to get probed. |
| */ |
| if (strstr(dev_name(dev), "rfbi")) |
| return 0; |
| |
| /* |
| * Handle possible interconnect target modules defined within the DSS. |
| * The DSS components can be children of an interconnect target module |
| * after the device tree has been updated for the module data. |
| * See also omapdss_boot_init() for compatible fixup. |
| */ |
| if (strstr(dev_name(dev), "target-module")) |
| return device_for_each_child(dev, cmatch, |
| dss_add_child_component); |
| |
| component_match_add(cmatch->dev, match, dss_component_compare, dev); |
| |
| return 0; |
| } |
| |
| static int dss_probe_hardware(struct dss_device *dss) |
| { |
| u32 rev; |
| int r; |
| |
| r = dss_runtime_get(dss); |
| if (r) |
| return r; |
| |
| dss->dss_clk_rate = clk_get_rate(dss->dss_clk); |
| |
| /* Select DPLL */ |
| REG_FLD_MOD(dss, DSS_CONTROL, 0, 0, 0); |
| |
| dss_select_dispc_clk_source(dss, DSS_CLK_SRC_FCK); |
| |
| #ifdef CONFIG_OMAP2_DSS_VENC |
| REG_FLD_MOD(dss, DSS_CONTROL, 1, 4, 4); /* venc dac demen */ |
| REG_FLD_MOD(dss, DSS_CONTROL, 1, 3, 3); /* venc clock 4x enable */ |
| REG_FLD_MOD(dss, DSS_CONTROL, 0, 2, 2); /* venc clock mode = normal */ |
| #endif |
| dss->dsi_clk_source[0] = DSS_CLK_SRC_FCK; |
| dss->dsi_clk_source[1] = DSS_CLK_SRC_FCK; |
| dss->dispc_clk_source = DSS_CLK_SRC_FCK; |
| dss->lcd_clk_source[0] = DSS_CLK_SRC_FCK; |
| dss->lcd_clk_source[1] = DSS_CLK_SRC_FCK; |
| |
| rev = dss_read_reg(dss, DSS_REVISION); |
| pr_info("OMAP DSS rev %d.%d\n", FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); |
| |
| dss_runtime_put(dss); |
| |
| return 0; |
| } |
| |
| static int dss_probe(struct platform_device *pdev) |
| { |
| const struct soc_device_attribute *soc; |
| struct dss_component_match_data cmatch; |
| struct component_match *match = NULL; |
| struct resource *dss_mem; |
| struct dss_device *dss; |
| int r; |
| |
| dss = kzalloc(sizeof(*dss), GFP_KERNEL); |
| if (!dss) |
| return -ENOMEM; |
| |
| dss->pdev = pdev; |
| platform_set_drvdata(pdev, dss); |
| |
| r = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); |
| if (r) { |
| dev_err(&pdev->dev, "Failed to set the DMA mask\n"); |
| goto err_free_dss; |
| } |
| |
| /* |
| * The various OMAP3-based SoCs can't be told apart using the compatible |
| * string, use SoC device matching. |
| */ |
| soc = soc_device_match(dss_soc_devices); |
| if (soc) |
| dss->feat = soc->data; |
| else |
| dss->feat = of_match_device(dss_of_match, &pdev->dev)->data; |
| |
| /* Map I/O registers, get and setup clocks. */ |
| dss_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| dss->base = devm_ioremap_resource(&pdev->dev, dss_mem); |
| if (IS_ERR(dss->base)) { |
| r = PTR_ERR(dss->base); |
| goto err_free_dss; |
| } |
| |
| r = dss_get_clocks(dss); |
| if (r) |
| goto err_free_dss; |
| |
| r = dss_setup_default_clock(dss); |
| if (r) |
| goto err_put_clocks; |
| |
| /* Setup the video PLLs and the DPI and SDI ports. */ |
| r = dss_video_pll_probe(dss); |
| if (r) |
| goto err_put_clocks; |
| |
| r = dss_init_ports(dss); |
| if (r) |
| goto err_uninit_plls; |
| |
| /* Enable runtime PM and probe the hardware. */ |
| pm_runtime_enable(&pdev->dev); |
| |
| r = dss_probe_hardware(dss); |
| if (r) |
| goto err_pm_runtime_disable; |
| |
| /* Initialize debugfs. */ |
| r = dss_initialize_debugfs(dss); |
| if (r) |
| goto err_pm_runtime_disable; |
| |
| dss->debugfs.clk = dss_debugfs_create_file(dss, "clk", |
| dss_debug_dump_clocks, dss); |
| dss->debugfs.dss = dss_debugfs_create_file(dss, "dss", dss_dump_regs, |
| dss); |
| |
| /* Add all the child devices as components. */ |
| r = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev); |
| if (r) |
| goto err_uninit_debugfs; |
| |
| omapdss_gather_components(&pdev->dev); |
| |
| cmatch.dev = &pdev->dev; |
| cmatch.match = &match; |
| device_for_each_child(&pdev->dev, &cmatch, dss_add_child_component); |
| |
| r = component_master_add_with_match(&pdev->dev, &dss_component_ops, match); |
| if (r) |
| goto err_of_depopulate; |
| |
| return 0; |
| |
| err_of_depopulate: |
| of_platform_depopulate(&pdev->dev); |
| |
| err_uninit_debugfs: |
| dss_debugfs_remove_file(dss->debugfs.clk); |
| dss_debugfs_remove_file(dss->debugfs.dss); |
| dss_uninitialize_debugfs(dss); |
| |
| err_pm_runtime_disable: |
| pm_runtime_disable(&pdev->dev); |
| dss_uninit_ports(dss); |
| |
| err_uninit_plls: |
| if (dss->video1_pll) |
| dss_video_pll_uninit(dss->video1_pll); |
| if (dss->video2_pll) |
| dss_video_pll_uninit(dss->video2_pll); |
| |
| err_put_clocks: |
| dss_put_clocks(dss); |
| |
| err_free_dss: |
| kfree(dss); |
| |
| return r; |
| } |
| |
| static int dss_remove(struct platform_device *pdev) |
| { |
| struct dss_device *dss = platform_get_drvdata(pdev); |
| |
| of_platform_depopulate(&pdev->dev); |
| |
| component_master_del(&pdev->dev, &dss_component_ops); |
| |
| dss_debugfs_remove_file(dss->debugfs.clk); |
| dss_debugfs_remove_file(dss->debugfs.dss); |
| dss_uninitialize_debugfs(dss); |
| |
| pm_runtime_disable(&pdev->dev); |
| |
| dss_uninit_ports(dss); |
| |
| if (dss->video1_pll) |
| dss_video_pll_uninit(dss->video1_pll); |
| |
| if (dss->video2_pll) |
| dss_video_pll_uninit(dss->video2_pll); |
| |
| dss_put_clocks(dss); |
| |
| kfree(dss); |
| |
| return 0; |
| } |
| |
| static void dss_shutdown(struct platform_device *pdev) |
| { |
| struct omap_dss_device *dssdev = NULL; |
| |
| DSSDBG("shutdown\n"); |
| |
| for_each_dss_output(dssdev) { |
| if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE && |
| dssdev->ops && dssdev->ops->disable) |
| dssdev->ops->disable(dssdev); |
| } |
| } |
| |
| static int dss_runtime_suspend(struct device *dev) |
| { |
| struct dss_device *dss = dev_get_drvdata(dev); |
| |
| dss_save_context(dss); |
| dss_set_min_bus_tput(dev, 0); |
| |
| pinctrl_pm_select_sleep_state(dev); |
| |
| return 0; |
| } |
| |
| static int dss_runtime_resume(struct device *dev) |
| { |
| struct dss_device *dss = dev_get_drvdata(dev); |
| int r; |
| |
| pinctrl_pm_select_default_state(dev); |
| |
| /* |
| * Set an arbitrarily high tput request to ensure OPP100. |
| * What we should really do is to make a request to stay in OPP100, |
| * without any tput requirements, but that is not currently possible |
| * via the PM layer. |
| */ |
| |
| r = dss_set_min_bus_tput(dev, 1000000000); |
| if (r) |
| return r; |
| |
| dss_restore_context(dss); |
| return 0; |
| } |
| |
| static const struct dev_pm_ops dss_pm_ops = { |
| .runtime_suspend = dss_runtime_suspend, |
| .runtime_resume = dss_runtime_resume, |
| SET_LATE_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume) |
| }; |
| |
| struct platform_driver omap_dsshw_driver = { |
| .probe = dss_probe, |
| .remove = dss_remove, |
| .shutdown = dss_shutdown, |
| .driver = { |
| .name = "omapdss_dss", |
| .pm = &dss_pm_ops, |
| .of_match_table = dss_of_match, |
| .suppress_bind_attrs = true, |
| }, |
| }; |
| |
| /* INIT */ |
| static struct platform_driver * const omap_dss_drivers[] = { |
| &omap_dsshw_driver, |
| &omap_dispchw_driver, |
| #ifdef CONFIG_OMAP2_DSS_DSI |
| &omap_dsihw_driver, |
| #endif |
| #ifdef CONFIG_OMAP2_DSS_VENC |
| &omap_venchw_driver, |
| #endif |
| #ifdef CONFIG_OMAP4_DSS_HDMI |
| &omapdss_hdmi4hw_driver, |
| #endif |
| #ifdef CONFIG_OMAP5_DSS_HDMI |
| &omapdss_hdmi5hw_driver, |
| #endif |
| }; |
| |
| static int __init omap_dss_init(void) |
| { |
| return platform_register_drivers(omap_dss_drivers, |
| ARRAY_SIZE(omap_dss_drivers)); |
| } |
| |
| static void __exit omap_dss_exit(void) |
| { |
| platform_unregister_drivers(omap_dss_drivers, |
| ARRAY_SIZE(omap_dss_drivers)); |
| } |
| |
| module_init(omap_dss_init); |
| module_exit(omap_dss_exit); |
| |
| MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>"); |
| MODULE_DESCRIPTION("OMAP2/3/4/5 Display Subsystem"); |
| MODULE_LICENSE("GPL v2"); |