| /* | 
 |  * Kernel CAPI interface for the Gigaset driver | 
 |  * | 
 |  * Copyright (c) 2009 by Tilman Schmidt <tilman@imap.cc>. | 
 |  * | 
 |  * ===================================================================== | 
 |  *	This program is free software; you can redistribute it and/or | 
 |  *	modify it under the terms of the GNU General Public License as | 
 |  *	published by the Free Software Foundation; either version 2 of | 
 |  *	the License, or (at your option) any later version. | 
 |  * ===================================================================== | 
 |  */ | 
 |  | 
 | #include "gigaset.h" | 
 | #include <linux/proc_fs.h> | 
 | #include <linux/seq_file.h> | 
 | #include <linux/ratelimit.h> | 
 | #include <linux/isdn/capilli.h> | 
 | #include <linux/isdn/capicmd.h> | 
 | #include <linux/isdn/capiutil.h> | 
 | #include <linux/export.h> | 
 |  | 
 | /* missing from kernelcapi.h */ | 
 | #define CapiNcpiNotSupportedByProtocol	0x0001 | 
 | #define CapiFlagsNotSupportedByProtocol	0x0002 | 
 | #define CapiAlertAlreadySent		0x0003 | 
 | #define CapiFacilitySpecificFunctionNotSupported	0x3011 | 
 |  | 
 | /* missing from capicmd.h */ | 
 | #define CAPI_CONNECT_IND_BASELEN	(CAPI_MSG_BASELEN + 4 + 2 + 8 * 1) | 
 | #define CAPI_CONNECT_ACTIVE_IND_BASELEN	(CAPI_MSG_BASELEN + 4 + 3 * 1) | 
 | #define CAPI_CONNECT_B3_IND_BASELEN	(CAPI_MSG_BASELEN + 4 + 1) | 
 | #define CAPI_CONNECT_B3_ACTIVE_IND_BASELEN	(CAPI_MSG_BASELEN + 4 + 1) | 
 | #define CAPI_DATA_B3_REQ_LEN64		(CAPI_MSG_BASELEN + 4 + 4 + 2 + 2 + 2 + 8) | 
 | #define CAPI_DATA_B3_CONF_LEN		(CAPI_MSG_BASELEN + 4 + 2 + 2) | 
 | #define CAPI_DISCONNECT_IND_LEN		(CAPI_MSG_BASELEN + 4 + 2) | 
 | #define CAPI_DISCONNECT_B3_IND_BASELEN	(CAPI_MSG_BASELEN + 4 + 2 + 1) | 
 | #define CAPI_FACILITY_CONF_BASELEN	(CAPI_MSG_BASELEN + 4 + 2 + 2 + 1) | 
 | /* most _CONF messages contain only Controller/PLCI/NCCI and Info parameters */ | 
 | #define CAPI_STDCONF_LEN		(CAPI_MSG_BASELEN + 4 + 2) | 
 |  | 
 | #define CAPI_FACILITY_HANDSET	0x0000 | 
 | #define CAPI_FACILITY_DTMF	0x0001 | 
 | #define CAPI_FACILITY_V42BIS	0x0002 | 
 | #define CAPI_FACILITY_SUPPSVC	0x0003 | 
 | #define CAPI_FACILITY_WAKEUP	0x0004 | 
 | #define CAPI_FACILITY_LI	0x0005 | 
 |  | 
 | #define CAPI_SUPPSVC_GETSUPPORTED	0x0000 | 
 | #define CAPI_SUPPSVC_LISTEN		0x0001 | 
 |  | 
 | /* missing from capiutil.h */ | 
 | #define CAPIMSG_PLCI_PART(m)	CAPIMSG_U8(m, 9) | 
 | #define CAPIMSG_NCCI_PART(m)	CAPIMSG_U16(m, 10) | 
 | #define CAPIMSG_HANDLE_REQ(m)	CAPIMSG_U16(m, 18) /* DATA_B3_REQ/_IND only! */ | 
 | #define CAPIMSG_FLAGS(m)	CAPIMSG_U16(m, 20) | 
 | #define CAPIMSG_SETCONTROLLER(m, contr)	capimsg_setu8(m, 8, contr) | 
 | #define CAPIMSG_SETPLCI_PART(m, plci)	capimsg_setu8(m, 9, plci) | 
 | #define CAPIMSG_SETNCCI_PART(m, ncci)	capimsg_setu16(m, 10, ncci) | 
 | #define CAPIMSG_SETFLAGS(m, flags)	capimsg_setu16(m, 20, flags) | 
 |  | 
 | /* parameters with differing location in DATA_B3_CONF/_RESP: */ | 
 | #define CAPIMSG_SETHANDLE_CONF(m, handle)	capimsg_setu16(m, 12, handle) | 
 | #define	CAPIMSG_SETINFO_CONF(m, info)		capimsg_setu16(m, 14, info) | 
 |  | 
 | /* Flags (DATA_B3_REQ/_IND) */ | 
 | #define CAPI_FLAGS_DELIVERY_CONFIRMATION	0x04 | 
 | #define CAPI_FLAGS_RESERVED			(~0x1f) | 
 |  | 
 | /* buffer sizes */ | 
 | #define MAX_BC_OCTETS 11 | 
 | #define MAX_HLC_OCTETS 3 | 
 | #define MAX_NUMBER_DIGITS 20 | 
 | #define MAX_FMT_IE_LEN 20 | 
 |  | 
 | /* values for bcs->apconnstate */ | 
 | #define APCONN_NONE	0	/* inactive/listening */ | 
 | #define APCONN_SETUP	1	/* connecting */ | 
 | #define APCONN_ACTIVE	2	/* B channel up */ | 
 |  | 
 | /* registered application data structure */ | 
 | struct gigaset_capi_appl { | 
 | 	struct list_head ctrlist; | 
 | 	struct gigaset_capi_appl *bcnext; | 
 | 	u16 id; | 
 | 	struct capi_register_params rp; | 
 | 	u16 nextMessageNumber; | 
 | 	u32 listenInfoMask; | 
 | 	u32 listenCIPmask; | 
 | }; | 
 |  | 
 | /* CAPI specific controller data structure */ | 
 | struct gigaset_capi_ctr { | 
 | 	struct capi_ctr ctr; | 
 | 	struct list_head appls; | 
 | 	struct sk_buff_head sendqueue; | 
 | 	atomic_t sendqlen; | 
 | 	/* two _cmsg structures possibly used concurrently: */ | 
 | 	_cmsg hcmsg;	/* for message composition triggered from hardware */ | 
 | 	_cmsg acmsg;	/* for dissection of messages sent from application */ | 
 | 	u8 bc_buf[MAX_BC_OCTETS + 1]; | 
 | 	u8 hlc_buf[MAX_HLC_OCTETS + 1]; | 
 | 	u8 cgpty_buf[MAX_NUMBER_DIGITS + 3]; | 
 | 	u8 cdpty_buf[MAX_NUMBER_DIGITS + 2]; | 
 | }; | 
 |  | 
 | /* CIP Value table (from CAPI 2.0 standard, ch. 6.1) */ | 
 | static struct { | 
 | 	u8 *bc; | 
 | 	u8 *hlc; | 
 | } cip2bchlc[] = { | 
 | 	[1] = { "8090A3", NULL },	/* Speech (A-law) */ | 
 | 	[2] = { "8890", NULL },		/* Unrestricted digital information */ | 
 | 	[3] = { "8990", NULL },		/* Restricted digital information */ | 
 | 	[4] = { "9090A3", NULL },	/* 3,1 kHz audio (A-law) */ | 
 | 	[5] = { "9190", NULL },		/* 7 kHz audio */ | 
 | 	[6] = { "9890", NULL },		/* Video */ | 
 | 	[7] = { "88C0C6E6", NULL },	/* Packet mode */ | 
 | 	[8] = { "8890218F", NULL },	/* 56 kbit/s rate adaptation */ | 
 | 	[9] = { "9190A5", NULL },	/* Unrestricted digital information | 
 | 					 * with tones/announcements */ | 
 | 	[16] = { "8090A3", "9181" },	/* Telephony */ | 
 | 	[17] = { "9090A3", "9184" },	/* Group 2/3 facsimile */ | 
 | 	[18] = { "8890", "91A1" },	/* Group 4 facsimile Class 1 */ | 
 | 	[19] = { "8890", "91A4" },	/* Teletex service basic and mixed mode | 
 | 					 * and Group 4 facsimile service | 
 | 					 * Classes II and III */ | 
 | 	[20] = { "8890", "91A8" },	/* Teletex service basic and | 
 | 					 * processable mode */ | 
 | 	[21] = { "8890", "91B1" },	/* Teletex service basic mode */ | 
 | 	[22] = { "8890", "91B2" },	/* International interworking for | 
 | 					 * Videotex */ | 
 | 	[23] = { "8890", "91B5" },	/* Telex */ | 
 | 	[24] = { "8890", "91B8" },	/* Message Handling Systems | 
 | 					 * in accordance with X.400 */ | 
 | 	[25] = { "8890", "91C1" },	/* OSI application | 
 | 					 * in accordance with X.200 */ | 
 | 	[26] = { "9190A5", "9181" },	/* 7 kHz telephony */ | 
 | 	[27] = { "9190A5", "916001" },	/* Video telephony, first connection */ | 
 | 	[28] = { "8890", "916002" },	/* Video telephony, second connection */ | 
 | }; | 
 |  | 
 | /* | 
 |  * helper functions | 
 |  * ================ | 
 |  */ | 
 |  | 
 | /* | 
 |  * emit unsupported parameter warning | 
 |  */ | 
 | static inline void ignore_cstruct_param(struct cardstate *cs, _cstruct param, | 
 | 					char *msgname, char *paramname) | 
 | { | 
 | 	if (param && *param) | 
 | 		dev_warn(cs->dev, "%s: ignoring unsupported parameter: %s\n", | 
 | 			 msgname, paramname); | 
 | } | 
 |  | 
 | /* | 
 |  * convert an IE from Gigaset hex string to ETSI binary representation | 
 |  * including length byte | 
 |  * return value: result length, -1 on error | 
 |  */ | 
 | static int encode_ie(char *in, u8 *out, int maxlen) | 
 | { | 
 | 	int l = 0; | 
 | 	while (*in) { | 
 | 		if (!isxdigit(in[0]) || !isxdigit(in[1]) || l >= maxlen) | 
 | 			return -1; | 
 | 		out[++l] = (hex_to_bin(in[0]) << 4) + hex_to_bin(in[1]); | 
 | 		in += 2; | 
 | 	} | 
 | 	out[0] = l; | 
 | 	return l; | 
 | } | 
 |  | 
 | /* | 
 |  * convert an IE from ETSI binary representation including length byte | 
 |  * to Gigaset hex string | 
 |  */ | 
 | static void decode_ie(u8 *in, char *out) | 
 | { | 
 | 	int i = *in; | 
 | 	while (i-- > 0) { | 
 | 		/* ToDo: conversion to upper case necessary? */ | 
 | 		*out++ = toupper(hex_asc_hi(*++in)); | 
 | 		*out++ = toupper(hex_asc_lo(*in)); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * retrieve application data structure for an application ID | 
 |  */ | 
 | static inline struct gigaset_capi_appl * | 
 | get_appl(struct gigaset_capi_ctr *iif, u16 appl) | 
 | { | 
 | 	struct gigaset_capi_appl *ap; | 
 |  | 
 | 	list_for_each_entry(ap, &iif->appls, ctrlist) | 
 | 		if (ap->id == appl) | 
 | 			return ap; | 
 | 	return NULL; | 
 | } | 
 |  | 
 | /* | 
 |  * dump CAPI message to kernel messages for debugging | 
 |  */ | 
 | static inline void dump_cmsg(enum debuglevel level, const char *tag, _cmsg *p) | 
 | { | 
 | #ifdef CONFIG_GIGASET_DEBUG | 
 | 	/* dump at most 20 messages in 20 secs */ | 
 | 	static DEFINE_RATELIMIT_STATE(msg_dump_ratelimit, 20 * HZ, 20); | 
 | 	_cdebbuf *cdb; | 
 |  | 
 | 	if (!(gigaset_debuglevel & level)) | 
 | 		return; | 
 | 	if (!___ratelimit(&msg_dump_ratelimit, tag)) | 
 | 		return; | 
 |  | 
 | 	cdb = capi_cmsg2str(p); | 
 | 	if (cdb) { | 
 | 		gig_dbg(level, "%s: [%d] %s", tag, p->ApplId, cdb->buf); | 
 | 		cdebbuf_free(cdb); | 
 | 	} else { | 
 | 		gig_dbg(level, "%s: [%d] %s", tag, p->ApplId, | 
 | 			capi_cmd2str(p->Command, p->Subcommand)); | 
 | 	} | 
 | #endif | 
 | } | 
 |  | 
 | static inline void dump_rawmsg(enum debuglevel level, const char *tag, | 
 | 			       unsigned char *data) | 
 | { | 
 | #ifdef CONFIG_GIGASET_DEBUG | 
 | 	char *dbgline; | 
 | 	int i, l; | 
 |  | 
 | 	if (!(gigaset_debuglevel & level)) | 
 | 		return; | 
 |  | 
 | 	l = CAPIMSG_LEN(data); | 
 | 	if (l < 12) { | 
 | 		gig_dbg(level, "%s: ??? LEN=%04d", tag, l); | 
 | 		return; | 
 | 	} | 
 | 	gig_dbg(level, "%s: 0x%02x:0x%02x: ID=%03d #0x%04x LEN=%04d NCCI=0x%x", | 
 | 		tag, CAPIMSG_COMMAND(data), CAPIMSG_SUBCOMMAND(data), | 
 | 		CAPIMSG_APPID(data), CAPIMSG_MSGID(data), l, | 
 | 		CAPIMSG_CONTROL(data)); | 
 | 	l -= 12; | 
 | 	if (l <= 0) | 
 | 		return; | 
 | 	dbgline = kmalloc(3 * l, GFP_ATOMIC); | 
 | 	if (!dbgline) | 
 | 		return; | 
 | 	for (i = 0; i < l; i++) { | 
 | 		dbgline[3 * i] = hex_asc_hi(data[12 + i]); | 
 | 		dbgline[3 * i + 1] = hex_asc_lo(data[12 + i]); | 
 | 		dbgline[3 * i + 2] = ' '; | 
 | 	} | 
 | 	dbgline[3 * l - 1] = '\0'; | 
 | 	gig_dbg(level, "  %s", dbgline); | 
 | 	kfree(dbgline); | 
 | 	if (CAPIMSG_COMMAND(data) == CAPI_DATA_B3 && | 
 | 	    (CAPIMSG_SUBCOMMAND(data) == CAPI_REQ || | 
 | 	     CAPIMSG_SUBCOMMAND(data) == CAPI_IND)) { | 
 | 		l = CAPIMSG_DATALEN(data); | 
 | 		gig_dbg(level, "   DataLength=%d", l); | 
 | 		if (l <= 0 || !(gigaset_debuglevel & DEBUG_LLDATA)) | 
 | 			return; | 
 | 		if (l > 64) | 
 | 			l = 64; /* arbitrary limit */ | 
 | 		dbgline = kmalloc(3 * l, GFP_ATOMIC); | 
 | 		if (!dbgline) | 
 | 			return; | 
 | 		data += CAPIMSG_LEN(data); | 
 | 		for (i = 0; i < l; i++) { | 
 | 			dbgline[3 * i] = hex_asc_hi(data[i]); | 
 | 			dbgline[3 * i + 1] = hex_asc_lo(data[i]); | 
 | 			dbgline[3 * i + 2] = ' '; | 
 | 		} | 
 | 		dbgline[3 * l - 1] = '\0'; | 
 | 		gig_dbg(level, "  %s", dbgline); | 
 | 		kfree(dbgline); | 
 | 	} | 
 | #endif | 
 | } | 
 |  | 
 | /* | 
 |  * format CAPI IE as string | 
 |  */ | 
 |  | 
 | #ifdef CONFIG_GIGASET_DEBUG | 
 | static const char *format_ie(const char *ie) | 
 | { | 
 | 	static char result[3 * MAX_FMT_IE_LEN]; | 
 | 	int len, count; | 
 | 	char *pout = result; | 
 |  | 
 | 	if (!ie) | 
 | 		return "NULL"; | 
 |  | 
 | 	count = len = ie[0]; | 
 | 	if (count > MAX_FMT_IE_LEN) | 
 | 		count = MAX_FMT_IE_LEN - 1; | 
 | 	while (count--) { | 
 | 		*pout++ = hex_asc_hi(*++ie); | 
 | 		*pout++ = hex_asc_lo(*ie); | 
 | 		*pout++ = ' '; | 
 | 	} | 
 | 	if (len > MAX_FMT_IE_LEN) { | 
 | 		*pout++ = '.'; | 
 | 		*pout++ = '.'; | 
 | 		*pout++ = '.'; | 
 | 	} | 
 | 	*--pout = 0; | 
 | 	return result; | 
 | } | 
 | #endif | 
 |  | 
 | /* | 
 |  * emit DATA_B3_CONF message | 
 |  */ | 
 | static void send_data_b3_conf(struct cardstate *cs, struct capi_ctr *ctr, | 
 | 			      u16 appl, u16 msgid, int channel, | 
 | 			      u16 handle, u16 info) | 
 | { | 
 | 	struct sk_buff *cskb; | 
 | 	u8 *msg; | 
 |  | 
 | 	cskb = alloc_skb(CAPI_DATA_B3_CONF_LEN, GFP_ATOMIC); | 
 | 	if (!cskb) { | 
 | 		dev_err(cs->dev, "%s: out of memory\n", __func__); | 
 | 		return; | 
 | 	} | 
 | 	/* frequent message, avoid _cmsg overhead */ | 
 | 	msg = __skb_put(cskb, CAPI_DATA_B3_CONF_LEN); | 
 | 	CAPIMSG_SETLEN(msg, CAPI_DATA_B3_CONF_LEN); | 
 | 	CAPIMSG_SETAPPID(msg, appl); | 
 | 	CAPIMSG_SETCOMMAND(msg, CAPI_DATA_B3); | 
 | 	CAPIMSG_SETSUBCOMMAND(msg,  CAPI_CONF); | 
 | 	CAPIMSG_SETMSGID(msg, msgid); | 
 | 	CAPIMSG_SETCONTROLLER(msg, ctr->cnr); | 
 | 	CAPIMSG_SETPLCI_PART(msg, channel); | 
 | 	CAPIMSG_SETNCCI_PART(msg, 1); | 
 | 	CAPIMSG_SETHANDLE_CONF(msg, handle); | 
 | 	CAPIMSG_SETINFO_CONF(msg, info); | 
 |  | 
 | 	/* emit message */ | 
 | 	dump_rawmsg(DEBUG_MCMD, __func__, msg); | 
 | 	capi_ctr_handle_message(ctr, appl, cskb); | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * driver interface functions | 
 |  * ========================== | 
 |  */ | 
 |  | 
 | /** | 
 |  * gigaset_skb_sent() - acknowledge transmission of outgoing skb | 
 |  * @bcs:	B channel descriptor structure. | 
 |  * @skb:	sent data. | 
 |  * | 
 |  * Called by hardware module {bas,ser,usb}_gigaset when the data in a | 
 |  * skb has been successfully sent, for signalling completion to the LL. | 
 |  */ | 
 | void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *dskb) | 
 | { | 
 | 	struct cardstate *cs = bcs->cs; | 
 | 	struct gigaset_capi_ctr *iif = cs->iif; | 
 | 	struct gigaset_capi_appl *ap = bcs->ap; | 
 | 	unsigned char *req = skb_mac_header(dskb); | 
 | 	u16 flags; | 
 |  | 
 | 	/* update statistics */ | 
 | 	++bcs->trans_up; | 
 |  | 
 | 	if (!ap) { | 
 | 		gig_dbg(DEBUG_MCMD, "%s: application gone", __func__); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* don't send further B3 messages if disconnected */ | 
 | 	if (bcs->apconnstate < APCONN_ACTIVE) { | 
 | 		gig_dbg(DEBUG_MCMD, "%s: disconnected", __func__); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * send DATA_B3_CONF if "delivery confirmation" bit was set in request; | 
 | 	 * otherwise it has already been sent by do_data_b3_req() | 
 | 	 */ | 
 | 	flags = CAPIMSG_FLAGS(req); | 
 | 	if (flags & CAPI_FLAGS_DELIVERY_CONFIRMATION) | 
 | 		send_data_b3_conf(cs, &iif->ctr, ap->id, CAPIMSG_MSGID(req), | 
 | 				  bcs->channel + 1, CAPIMSG_HANDLE_REQ(req), | 
 | 				  (flags & ~CAPI_FLAGS_DELIVERY_CONFIRMATION) ? | 
 | 				  CapiFlagsNotSupportedByProtocol : | 
 | 				  CAPI_NOERROR); | 
 | } | 
 | EXPORT_SYMBOL_GPL(gigaset_skb_sent); | 
 |  | 
 | /** | 
 |  * gigaset_skb_rcvd() - pass received skb to LL | 
 |  * @bcs:	B channel descriptor structure. | 
 |  * @skb:	received data. | 
 |  * | 
 |  * Called by hardware module {bas,ser,usb}_gigaset when user data has | 
 |  * been successfully received, for passing to the LL. | 
 |  * Warning: skb must not be accessed anymore! | 
 |  */ | 
 | void gigaset_skb_rcvd(struct bc_state *bcs, struct sk_buff *skb) | 
 | { | 
 | 	struct cardstate *cs = bcs->cs; | 
 | 	struct gigaset_capi_ctr *iif = cs->iif; | 
 | 	struct gigaset_capi_appl *ap = bcs->ap; | 
 | 	int len = skb->len; | 
 |  | 
 | 	/* update statistics */ | 
 | 	bcs->trans_down++; | 
 |  | 
 | 	if (!ap) { | 
 | 		gig_dbg(DEBUG_MCMD, "%s: application gone", __func__); | 
 | 		dev_kfree_skb_any(skb); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* don't send further B3 messages if disconnected */ | 
 | 	if (bcs->apconnstate < APCONN_ACTIVE) { | 
 | 		gig_dbg(DEBUG_MCMD, "%s: disconnected", __func__); | 
 | 		dev_kfree_skb_any(skb); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * prepend DATA_B3_IND message to payload | 
 | 	 * Parameters: NCCI = 1, all others 0/unused | 
 | 	 * frequent message, avoid _cmsg overhead | 
 | 	 */ | 
 | 	skb_push(skb, CAPI_DATA_B3_REQ_LEN); | 
 | 	CAPIMSG_SETLEN(skb->data, CAPI_DATA_B3_REQ_LEN); | 
 | 	CAPIMSG_SETAPPID(skb->data, ap->id); | 
 | 	CAPIMSG_SETCOMMAND(skb->data, CAPI_DATA_B3); | 
 | 	CAPIMSG_SETSUBCOMMAND(skb->data,  CAPI_IND); | 
 | 	CAPIMSG_SETMSGID(skb->data, ap->nextMessageNumber++); | 
 | 	CAPIMSG_SETCONTROLLER(skb->data, iif->ctr.cnr); | 
 | 	CAPIMSG_SETPLCI_PART(skb->data, bcs->channel + 1); | 
 | 	CAPIMSG_SETNCCI_PART(skb->data, 1); | 
 | 	/* Data parameter not used */ | 
 | 	CAPIMSG_SETDATALEN(skb->data, len); | 
 | 	/* Data handle parameter not used */ | 
 | 	CAPIMSG_SETFLAGS(skb->data, 0); | 
 | 	/* Data64 parameter not present */ | 
 |  | 
 | 	/* emit message */ | 
 | 	dump_rawmsg(DEBUG_MCMD, __func__, skb->data); | 
 | 	capi_ctr_handle_message(&iif->ctr, ap->id, skb); | 
 | } | 
 | EXPORT_SYMBOL_GPL(gigaset_skb_rcvd); | 
 |  | 
 | /** | 
 |  * gigaset_isdn_rcv_err() - signal receive error | 
 |  * @bcs:	B channel descriptor structure. | 
 |  * | 
 |  * Called by hardware module {bas,ser,usb}_gigaset when a receive error | 
 |  * has occurred, for signalling to the LL. | 
 |  */ | 
 | void gigaset_isdn_rcv_err(struct bc_state *bcs) | 
 | { | 
 | 	/* if currently ignoring packets, just count down */ | 
 | 	if (bcs->ignore) { | 
 | 		bcs->ignore--; | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* update statistics */ | 
 | 	bcs->corrupted++; | 
 |  | 
 | 	/* ToDo: signal error -> LL */ | 
 | } | 
 | EXPORT_SYMBOL_GPL(gigaset_isdn_rcv_err); | 
 |  | 
 | /** | 
 |  * gigaset_isdn_icall() - signal incoming call | 
 |  * @at_state:	connection state structure. | 
 |  * | 
 |  * Called by main module at tasklet level to notify the LL that an incoming | 
 |  * call has been received. @at_state contains the parameters of the call. | 
 |  * | 
 |  * Return value: call disposition (ICALL_*) | 
 |  */ | 
 | int gigaset_isdn_icall(struct at_state_t *at_state) | 
 | { | 
 | 	struct cardstate *cs = at_state->cs; | 
 | 	struct bc_state *bcs = at_state->bcs; | 
 | 	struct gigaset_capi_ctr *iif = cs->iif; | 
 | 	struct gigaset_capi_appl *ap; | 
 | 	u32 actCIPmask; | 
 | 	struct sk_buff *skb; | 
 | 	unsigned int msgsize; | 
 | 	unsigned long flags; | 
 | 	int i; | 
 |  | 
 | 	/* | 
 | 	 * ToDo: signal calls without a free B channel, too | 
 | 	 * (requires a u8 handle for the at_state structure that can | 
 | 	 * be stored in the PLCI and used in the CONNECT_RESP message | 
 | 	 * handler to retrieve it) | 
 | 	 */ | 
 | 	if (!bcs) | 
 | 		return ICALL_IGNORE; | 
 |  | 
 | 	/* prepare CONNECT_IND message, using B channel number as PLCI */ | 
 | 	capi_cmsg_header(&iif->hcmsg, 0, CAPI_CONNECT, CAPI_IND, 0, | 
 | 			 iif->ctr.cnr | ((bcs->channel + 1) << 8)); | 
 |  | 
 | 	/* minimum size, all structs empty */ | 
 | 	msgsize = CAPI_CONNECT_IND_BASELEN; | 
 |  | 
 | 	/* Bearer Capability (mandatory) */ | 
 | 	if (at_state->str_var[STR_ZBC]) { | 
 | 		/* pass on BC from Gigaset */ | 
 | 		if (encode_ie(at_state->str_var[STR_ZBC], iif->bc_buf, | 
 | 			      MAX_BC_OCTETS) < 0) { | 
 | 			dev_warn(cs->dev, "RING ignored - bad BC %s\n", | 
 | 				 at_state->str_var[STR_ZBC]); | 
 | 			return ICALL_IGNORE; | 
 | 		} | 
 |  | 
 | 		/* look up corresponding CIP value */ | 
 | 		iif->hcmsg.CIPValue = 0;	/* default if nothing found */ | 
 | 		for (i = 0; i < ARRAY_SIZE(cip2bchlc); i++) | 
 | 			if (cip2bchlc[i].bc != NULL && | 
 | 			    cip2bchlc[i].hlc == NULL && | 
 | 			    !strcmp(cip2bchlc[i].bc, | 
 | 				    at_state->str_var[STR_ZBC])) { | 
 | 				iif->hcmsg.CIPValue = i; | 
 | 				break; | 
 | 			} | 
 | 	} else { | 
 | 		/* no BC (internal call): assume CIP 1 (speech, A-law) */ | 
 | 		iif->hcmsg.CIPValue = 1; | 
 | 		encode_ie(cip2bchlc[1].bc, iif->bc_buf, MAX_BC_OCTETS); | 
 | 	} | 
 | 	iif->hcmsg.BC = iif->bc_buf; | 
 | 	msgsize += iif->hcmsg.BC[0]; | 
 |  | 
 | 	/* High Layer Compatibility (optional) */ | 
 | 	if (at_state->str_var[STR_ZHLC]) { | 
 | 		/* pass on HLC from Gigaset */ | 
 | 		if (encode_ie(at_state->str_var[STR_ZHLC], iif->hlc_buf, | 
 | 			      MAX_HLC_OCTETS) < 0) { | 
 | 			dev_warn(cs->dev, "RING ignored - bad HLC %s\n", | 
 | 				 at_state->str_var[STR_ZHLC]); | 
 | 			return ICALL_IGNORE; | 
 | 		} | 
 | 		iif->hcmsg.HLC = iif->hlc_buf; | 
 | 		msgsize += iif->hcmsg.HLC[0]; | 
 |  | 
 | 		/* look up corresponding CIP value */ | 
 | 		/* keep BC based CIP value if none found */ | 
 | 		if (at_state->str_var[STR_ZBC]) | 
 | 			for (i = 0; i < ARRAY_SIZE(cip2bchlc); i++) | 
 | 				if (cip2bchlc[i].hlc != NULL && | 
 | 				    !strcmp(cip2bchlc[i].hlc, | 
 | 					    at_state->str_var[STR_ZHLC]) && | 
 | 				    !strcmp(cip2bchlc[i].bc, | 
 | 					    at_state->str_var[STR_ZBC])) { | 
 | 					iif->hcmsg.CIPValue = i; | 
 | 					break; | 
 | 				} | 
 | 	} | 
 |  | 
 | 	/* Called Party Number (optional) */ | 
 | 	if (at_state->str_var[STR_ZCPN]) { | 
 | 		i = strlen(at_state->str_var[STR_ZCPN]); | 
 | 		if (i > MAX_NUMBER_DIGITS) { | 
 | 			dev_warn(cs->dev, "RING ignored - bad number %s\n", | 
 | 				 at_state->str_var[STR_ZBC]); | 
 | 			return ICALL_IGNORE; | 
 | 		} | 
 | 		iif->cdpty_buf[0] = i + 1; | 
 | 		iif->cdpty_buf[1] = 0x80; /* type / numbering plan unknown */ | 
 | 		memcpy(iif->cdpty_buf + 2, at_state->str_var[STR_ZCPN], i); | 
 | 		iif->hcmsg.CalledPartyNumber = iif->cdpty_buf; | 
 | 		msgsize += iif->hcmsg.CalledPartyNumber[0]; | 
 | 	} | 
 |  | 
 | 	/* Calling Party Number (optional) */ | 
 | 	if (at_state->str_var[STR_NMBR]) { | 
 | 		i = strlen(at_state->str_var[STR_NMBR]); | 
 | 		if (i > MAX_NUMBER_DIGITS) { | 
 | 			dev_warn(cs->dev, "RING ignored - bad number %s\n", | 
 | 				 at_state->str_var[STR_ZBC]); | 
 | 			return ICALL_IGNORE; | 
 | 		} | 
 | 		iif->cgpty_buf[0] = i + 2; | 
 | 		iif->cgpty_buf[1] = 0x00; /* type / numbering plan unknown */ | 
 | 		iif->cgpty_buf[2] = 0x80; /* pres. allowed, not screened */ | 
 | 		memcpy(iif->cgpty_buf + 3, at_state->str_var[STR_NMBR], i); | 
 | 		iif->hcmsg.CallingPartyNumber = iif->cgpty_buf; | 
 | 		msgsize += iif->hcmsg.CallingPartyNumber[0]; | 
 | 	} | 
 |  | 
 | 	/* remaining parameters (not supported, always left NULL): | 
 | 	 * - CalledPartySubaddress | 
 | 	 * - CallingPartySubaddress | 
 | 	 * - AdditionalInfo | 
 | 	 *   - BChannelinformation | 
 | 	 *   - Keypadfacility | 
 | 	 *   - Useruserdata | 
 | 	 *   - Facilitydataarray | 
 | 	 */ | 
 |  | 
 | 	gig_dbg(DEBUG_CMD, "icall: PLCI %x CIP %d BC %s", | 
 | 		iif->hcmsg.adr.adrPLCI, iif->hcmsg.CIPValue, | 
 | 		format_ie(iif->hcmsg.BC)); | 
 | 	gig_dbg(DEBUG_CMD, "icall: HLC %s", | 
 | 		format_ie(iif->hcmsg.HLC)); | 
 | 	gig_dbg(DEBUG_CMD, "icall: CgPty %s", | 
 | 		format_ie(iif->hcmsg.CallingPartyNumber)); | 
 | 	gig_dbg(DEBUG_CMD, "icall: CdPty %s", | 
 | 		format_ie(iif->hcmsg.CalledPartyNumber)); | 
 |  | 
 | 	/* scan application list for matching listeners */ | 
 | 	spin_lock_irqsave(&bcs->aplock, flags); | 
 | 	if (bcs->ap != NULL || bcs->apconnstate != APCONN_NONE) { | 
 | 		dev_warn(cs->dev, "%s: channel not properly cleared (%p/%d)\n", | 
 | 			 __func__, bcs->ap, bcs->apconnstate); | 
 | 		bcs->ap = NULL; | 
 | 		bcs->apconnstate = APCONN_NONE; | 
 | 	} | 
 | 	spin_unlock_irqrestore(&bcs->aplock, flags); | 
 | 	actCIPmask = 1 | (1 << iif->hcmsg.CIPValue); | 
 | 	list_for_each_entry(ap, &iif->appls, ctrlist) | 
 | 		if (actCIPmask & ap->listenCIPmask) { | 
 | 			/* build CONNECT_IND message for this application */ | 
 | 			iif->hcmsg.ApplId = ap->id; | 
 | 			iif->hcmsg.Messagenumber = ap->nextMessageNumber++; | 
 |  | 
 | 			skb = alloc_skb(msgsize, GFP_ATOMIC); | 
 | 			if (!skb) { | 
 | 				dev_err(cs->dev, "%s: out of memory\n", | 
 | 					__func__); | 
 | 				break; | 
 | 			} | 
 | 			capi_cmsg2message(&iif->hcmsg, __skb_put(skb, msgsize)); | 
 | 			dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg); | 
 |  | 
 | 			/* add to listeners on this B channel, update state */ | 
 | 			spin_lock_irqsave(&bcs->aplock, flags); | 
 | 			ap->bcnext = bcs->ap; | 
 | 			bcs->ap = ap; | 
 | 			bcs->chstate |= CHS_NOTIFY_LL; | 
 | 			bcs->apconnstate = APCONN_SETUP; | 
 | 			spin_unlock_irqrestore(&bcs->aplock, flags); | 
 |  | 
 | 			/* emit message */ | 
 | 			capi_ctr_handle_message(&iif->ctr, ap->id, skb); | 
 | 		} | 
 |  | 
 | 	/* | 
 | 	 * Return "accept" if any listeners. | 
 | 	 * Gigaset will send ALERTING. | 
 | 	 * There doesn't seem to be a way to avoid this. | 
 | 	 */ | 
 | 	return bcs->ap ? ICALL_ACCEPT : ICALL_IGNORE; | 
 | } | 
 |  | 
 | /* | 
 |  * send a DISCONNECT_IND message to an application | 
 |  * does not sleep, clobbers the controller's hcmsg structure | 
 |  */ | 
 | static void send_disconnect_ind(struct bc_state *bcs, | 
 | 				struct gigaset_capi_appl *ap, u16 reason) | 
 | { | 
 | 	struct cardstate *cs = bcs->cs; | 
 | 	struct gigaset_capi_ctr *iif = cs->iif; | 
 | 	struct sk_buff *skb; | 
 |  | 
 | 	if (bcs->apconnstate == APCONN_NONE) | 
 | 		return; | 
 |  | 
 | 	capi_cmsg_header(&iif->hcmsg, ap->id, CAPI_DISCONNECT, CAPI_IND, | 
 | 			 ap->nextMessageNumber++, | 
 | 			 iif->ctr.cnr | ((bcs->channel + 1) << 8)); | 
 | 	iif->hcmsg.Reason = reason; | 
 | 	skb = alloc_skb(CAPI_DISCONNECT_IND_LEN, GFP_ATOMIC); | 
 | 	if (!skb) { | 
 | 		dev_err(cs->dev, "%s: out of memory\n", __func__); | 
 | 		return; | 
 | 	} | 
 | 	capi_cmsg2message(&iif->hcmsg, __skb_put(skb, CAPI_DISCONNECT_IND_LEN)); | 
 | 	dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg); | 
 | 	capi_ctr_handle_message(&iif->ctr, ap->id, skb); | 
 | } | 
 |  | 
 | /* | 
 |  * send a DISCONNECT_B3_IND message to an application | 
 |  * Parameters: NCCI = 1, NCPI empty, Reason_B3 = 0 | 
 |  * does not sleep, clobbers the controller's hcmsg structure | 
 |  */ | 
 | static void send_disconnect_b3_ind(struct bc_state *bcs, | 
 | 				   struct gigaset_capi_appl *ap) | 
 | { | 
 | 	struct cardstate *cs = bcs->cs; | 
 | 	struct gigaset_capi_ctr *iif = cs->iif; | 
 | 	struct sk_buff *skb; | 
 |  | 
 | 	/* nothing to do if no logical connection active */ | 
 | 	if (bcs->apconnstate < APCONN_ACTIVE) | 
 | 		return; | 
 | 	bcs->apconnstate = APCONN_SETUP; | 
 |  | 
 | 	capi_cmsg_header(&iif->hcmsg, ap->id, CAPI_DISCONNECT_B3, CAPI_IND, | 
 | 			 ap->nextMessageNumber++, | 
 | 			 iif->ctr.cnr | ((bcs->channel + 1) << 8) | (1 << 16)); | 
 | 	skb = alloc_skb(CAPI_DISCONNECT_B3_IND_BASELEN, GFP_ATOMIC); | 
 | 	if (!skb) { | 
 | 		dev_err(cs->dev, "%s: out of memory\n", __func__); | 
 | 		return; | 
 | 	} | 
 | 	capi_cmsg2message(&iif->hcmsg, | 
 | 			  __skb_put(skb, CAPI_DISCONNECT_B3_IND_BASELEN)); | 
 | 	dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg); | 
 | 	capi_ctr_handle_message(&iif->ctr, ap->id, skb); | 
 | } | 
 |  | 
 | /** | 
 |  * gigaset_isdn_connD() - signal D channel connect | 
 |  * @bcs:	B channel descriptor structure. | 
 |  * | 
 |  * Called by main module at tasklet level to notify the LL that the D channel | 
 |  * connection has been established. | 
 |  */ | 
 | void gigaset_isdn_connD(struct bc_state *bcs) | 
 | { | 
 | 	struct cardstate *cs = bcs->cs; | 
 | 	struct gigaset_capi_ctr *iif = cs->iif; | 
 | 	struct gigaset_capi_appl *ap; | 
 | 	struct sk_buff *skb; | 
 | 	unsigned int msgsize; | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&bcs->aplock, flags); | 
 | 	ap = bcs->ap; | 
 | 	if (!ap) { | 
 | 		spin_unlock_irqrestore(&bcs->aplock, flags); | 
 | 		gig_dbg(DEBUG_CMD, "%s: application gone", __func__); | 
 | 		return; | 
 | 	} | 
 | 	if (bcs->apconnstate == APCONN_NONE) { | 
 | 		spin_unlock_irqrestore(&bcs->aplock, flags); | 
 | 		dev_warn(cs->dev, "%s: application %u not connected\n", | 
 | 			 __func__, ap->id); | 
 | 		return; | 
 | 	} | 
 | 	spin_unlock_irqrestore(&bcs->aplock, flags); | 
 | 	while (ap->bcnext) { | 
 | 		/* this should never happen */ | 
 | 		dev_warn(cs->dev, "%s: dropping extra application %u\n", | 
 | 			 __func__, ap->bcnext->id); | 
 | 		send_disconnect_ind(bcs, ap->bcnext, | 
 | 				    CapiCallGivenToOtherApplication); | 
 | 		ap->bcnext = ap->bcnext->bcnext; | 
 | 	} | 
 |  | 
 | 	/* prepare CONNECT_ACTIVE_IND message | 
 | 	 * Note: LLC not supported by device | 
 | 	 */ | 
 | 	capi_cmsg_header(&iif->hcmsg, ap->id, CAPI_CONNECT_ACTIVE, CAPI_IND, | 
 | 			 ap->nextMessageNumber++, | 
 | 			 iif->ctr.cnr | ((bcs->channel + 1) << 8)); | 
 |  | 
 | 	/* minimum size, all structs empty */ | 
 | 	msgsize = CAPI_CONNECT_ACTIVE_IND_BASELEN; | 
 |  | 
 | 	/* ToDo: set parameter: Connected number | 
 | 	 * (requires ev-layer state machine extension to collect | 
 | 	 * ZCON device reply) | 
 | 	 */ | 
 |  | 
 | 	/* build and emit CONNECT_ACTIVE_IND message */ | 
 | 	skb = alloc_skb(msgsize, GFP_ATOMIC); | 
 | 	if (!skb) { | 
 | 		dev_err(cs->dev, "%s: out of memory\n", __func__); | 
 | 		return; | 
 | 	} | 
 | 	capi_cmsg2message(&iif->hcmsg, __skb_put(skb, msgsize)); | 
 | 	dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg); | 
 | 	capi_ctr_handle_message(&iif->ctr, ap->id, skb); | 
 | } | 
 |  | 
 | /** | 
 |  * gigaset_isdn_hupD() - signal D channel hangup | 
 |  * @bcs:	B channel descriptor structure. | 
 |  * | 
 |  * Called by main module at tasklet level to notify the LL that the D channel | 
 |  * connection has been shut down. | 
 |  */ | 
 | void gigaset_isdn_hupD(struct bc_state *bcs) | 
 | { | 
 | 	struct gigaset_capi_appl *ap; | 
 | 	unsigned long flags; | 
 |  | 
 | 	/* | 
 | 	 * ToDo: pass on reason code reported by device | 
 | 	 * (requires ev-layer state machine extension to collect | 
 | 	 * ZCAU device reply) | 
 | 	 */ | 
 | 	spin_lock_irqsave(&bcs->aplock, flags); | 
 | 	while (bcs->ap != NULL) { | 
 | 		ap = bcs->ap; | 
 | 		bcs->ap = ap->bcnext; | 
 | 		spin_unlock_irqrestore(&bcs->aplock, flags); | 
 | 		send_disconnect_b3_ind(bcs, ap); | 
 | 		send_disconnect_ind(bcs, ap, 0); | 
 | 		spin_lock_irqsave(&bcs->aplock, flags); | 
 | 	} | 
 | 	bcs->apconnstate = APCONN_NONE; | 
 | 	spin_unlock_irqrestore(&bcs->aplock, flags); | 
 | } | 
 |  | 
 | /** | 
 |  * gigaset_isdn_connB() - signal B channel connect | 
 |  * @bcs:	B channel descriptor structure. | 
 |  * | 
 |  * Called by main module at tasklet level to notify the LL that the B channel | 
 |  * connection has been established. | 
 |  */ | 
 | void gigaset_isdn_connB(struct bc_state *bcs) | 
 | { | 
 | 	struct cardstate *cs = bcs->cs; | 
 | 	struct gigaset_capi_ctr *iif = cs->iif; | 
 | 	struct gigaset_capi_appl *ap; | 
 | 	struct sk_buff *skb; | 
 | 	unsigned long flags; | 
 | 	unsigned int msgsize; | 
 | 	u8 command; | 
 |  | 
 | 	spin_lock_irqsave(&bcs->aplock, flags); | 
 | 	ap = bcs->ap; | 
 | 	if (!ap) { | 
 | 		spin_unlock_irqrestore(&bcs->aplock, flags); | 
 | 		gig_dbg(DEBUG_CMD, "%s: application gone", __func__); | 
 | 		return; | 
 | 	} | 
 | 	if (!bcs->apconnstate) { | 
 | 		spin_unlock_irqrestore(&bcs->aplock, flags); | 
 | 		dev_warn(cs->dev, "%s: application %u not connected\n", | 
 | 			 __func__, ap->id); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * emit CONNECT_B3_ACTIVE_IND if we already got CONNECT_B3_REQ; | 
 | 	 * otherwise we have to emit CONNECT_B3_IND first, and follow up with | 
 | 	 * CONNECT_B3_ACTIVE_IND in reply to CONNECT_B3_RESP | 
 | 	 * Parameters in both cases always: NCCI = 1, NCPI empty | 
 | 	 */ | 
 | 	if (bcs->apconnstate >= APCONN_ACTIVE) { | 
 | 		command = CAPI_CONNECT_B3_ACTIVE; | 
 | 		msgsize = CAPI_CONNECT_B3_ACTIVE_IND_BASELEN; | 
 | 	} else { | 
 | 		command = CAPI_CONNECT_B3; | 
 | 		msgsize = CAPI_CONNECT_B3_IND_BASELEN; | 
 | 	} | 
 | 	bcs->apconnstate = APCONN_ACTIVE; | 
 |  | 
 | 	spin_unlock_irqrestore(&bcs->aplock, flags); | 
 |  | 
 | 	while (ap->bcnext) { | 
 | 		/* this should never happen */ | 
 | 		dev_warn(cs->dev, "%s: dropping extra application %u\n", | 
 | 			 __func__, ap->bcnext->id); | 
 | 		send_disconnect_ind(bcs, ap->bcnext, | 
 | 				    CapiCallGivenToOtherApplication); | 
 | 		ap->bcnext = ap->bcnext->bcnext; | 
 | 	} | 
 |  | 
 | 	capi_cmsg_header(&iif->hcmsg, ap->id, command, CAPI_IND, | 
 | 			 ap->nextMessageNumber++, | 
 | 			 iif->ctr.cnr | ((bcs->channel + 1) << 8) | (1 << 16)); | 
 | 	skb = alloc_skb(msgsize, GFP_ATOMIC); | 
 | 	if (!skb) { | 
 | 		dev_err(cs->dev, "%s: out of memory\n", __func__); | 
 | 		return; | 
 | 	} | 
 | 	capi_cmsg2message(&iif->hcmsg, __skb_put(skb, msgsize)); | 
 | 	dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg); | 
 | 	capi_ctr_handle_message(&iif->ctr, ap->id, skb); | 
 | } | 
 |  | 
 | /** | 
 |  * gigaset_isdn_hupB() - signal B channel hangup | 
 |  * @bcs:	B channel descriptor structure. | 
 |  * | 
 |  * Called by main module to notify the LL that the B channel connection has | 
 |  * been shut down. | 
 |  */ | 
 | void gigaset_isdn_hupB(struct bc_state *bcs) | 
 | { | 
 | 	struct gigaset_capi_appl *ap = bcs->ap; | 
 |  | 
 | 	/* ToDo: assure order of DISCONNECT_B3_IND and DISCONNECT_IND ? */ | 
 |  | 
 | 	if (!ap) { | 
 | 		gig_dbg(DEBUG_CMD, "%s: application gone", __func__); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	send_disconnect_b3_ind(bcs, ap); | 
 | } | 
 |  | 
 | /** | 
 |  * gigaset_isdn_start() - signal device availability | 
 |  * @cs:		device descriptor structure. | 
 |  * | 
 |  * Called by main module to notify the LL that the device is available for | 
 |  * use. | 
 |  */ | 
 | void gigaset_isdn_start(struct cardstate *cs) | 
 | { | 
 | 	struct gigaset_capi_ctr *iif = cs->iif; | 
 |  | 
 | 	/* fill profile data: manufacturer name */ | 
 | 	strcpy(iif->ctr.manu, "Siemens"); | 
 | 	/* CAPI and device version */ | 
 | 	iif->ctr.version.majorversion = 2;		/* CAPI 2.0 */ | 
 | 	iif->ctr.version.minorversion = 0; | 
 | 	/* ToDo: check/assert cs->gotfwver? */ | 
 | 	iif->ctr.version.majormanuversion = cs->fwver[0]; | 
 | 	iif->ctr.version.minormanuversion = cs->fwver[1]; | 
 | 	/* number of B channels supported */ | 
 | 	iif->ctr.profile.nbchannel = cs->channels; | 
 | 	/* global options: internal controller, supplementary services */ | 
 | 	iif->ctr.profile.goptions = 0x11; | 
 | 	/* B1 protocols: 64 kbit/s HDLC or transparent */ | 
 | 	iif->ctr.profile.support1 =  0x03; | 
 | 	/* B2 protocols: transparent only */ | 
 | 	/* ToDo: X.75 SLP ? */ | 
 | 	iif->ctr.profile.support2 =  0x02; | 
 | 	/* B3 protocols: transparent only */ | 
 | 	iif->ctr.profile.support3 =  0x01; | 
 | 	/* no serial number */ | 
 | 	strcpy(iif->ctr.serial, "0"); | 
 | 	capi_ctr_ready(&iif->ctr); | 
 | } | 
 |  | 
 | /** | 
 |  * gigaset_isdn_stop() - signal device unavailability | 
 |  * @cs:		device descriptor structure. | 
 |  * | 
 |  * Called by main module to notify the LL that the device is no longer | 
 |  * available for use. | 
 |  */ | 
 | void gigaset_isdn_stop(struct cardstate *cs) | 
 | { | 
 | 	struct gigaset_capi_ctr *iif = cs->iif; | 
 | 	capi_ctr_down(&iif->ctr); | 
 | } | 
 |  | 
 | /* | 
 |  * kernel CAPI callback methods | 
 |  * ============================ | 
 |  */ | 
 |  | 
 | /* | 
 |  * register CAPI application | 
 |  */ | 
 | static void gigaset_register_appl(struct capi_ctr *ctr, u16 appl, | 
 | 				  capi_register_params *rp) | 
 | { | 
 | 	struct gigaset_capi_ctr *iif | 
 | 		= container_of(ctr, struct gigaset_capi_ctr, ctr); | 
 | 	struct cardstate *cs = ctr->driverdata; | 
 | 	struct gigaset_capi_appl *ap; | 
 |  | 
 | 	gig_dbg(DEBUG_CMD, "%s [%u] l3cnt=%u blkcnt=%u blklen=%u", | 
 | 		__func__, appl, rp->level3cnt, rp->datablkcnt, rp->datablklen); | 
 |  | 
 | 	list_for_each_entry(ap, &iif->appls, ctrlist) | 
 | 		if (ap->id == appl) { | 
 | 			dev_notice(cs->dev, | 
 | 				   "application %u already registered\n", appl); | 
 | 			return; | 
 | 		} | 
 |  | 
 | 	ap = kzalloc(sizeof(*ap), GFP_KERNEL); | 
 | 	if (!ap) { | 
 | 		dev_err(cs->dev, "%s: out of memory\n", __func__); | 
 | 		return; | 
 | 	} | 
 | 	ap->id = appl; | 
 | 	ap->rp = *rp; | 
 |  | 
 | 	list_add(&ap->ctrlist, &iif->appls); | 
 | 	dev_info(cs->dev, "application %u registered\n", ap->id); | 
 | } | 
 |  | 
 | /* | 
 |  * remove CAPI application from channel | 
 |  * helper function to keep indentation levels down and stay in 80 columns | 
 |  */ | 
 |  | 
 | static inline void remove_appl_from_channel(struct bc_state *bcs, | 
 | 					    struct gigaset_capi_appl *ap) | 
 | { | 
 | 	struct cardstate *cs = bcs->cs; | 
 | 	struct gigaset_capi_appl *bcap; | 
 | 	unsigned long flags; | 
 | 	int prevconnstate; | 
 |  | 
 | 	spin_lock_irqsave(&bcs->aplock, flags); | 
 | 	bcap = bcs->ap; | 
 | 	if (bcap == NULL) { | 
 | 		spin_unlock_irqrestore(&bcs->aplock, flags); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* check first application on channel */ | 
 | 	if (bcap == ap) { | 
 | 		bcs->ap = ap->bcnext; | 
 | 		if (bcs->ap != NULL) { | 
 | 			spin_unlock_irqrestore(&bcs->aplock, flags); | 
 | 			return; | 
 | 		} | 
 |  | 
 | 		/* none left, clear channel state */ | 
 | 		prevconnstate = bcs->apconnstate; | 
 | 		bcs->apconnstate = APCONN_NONE; | 
 | 		spin_unlock_irqrestore(&bcs->aplock, flags); | 
 |  | 
 | 		if (prevconnstate == APCONN_ACTIVE) { | 
 | 			dev_notice(cs->dev, "%s: hanging up channel %u\n", | 
 | 				   __func__, bcs->channel); | 
 | 			gigaset_add_event(cs, &bcs->at_state, | 
 | 					  EV_HUP, NULL, 0, NULL); | 
 | 			gigaset_schedule_event(cs); | 
 | 		} | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* check remaining list */ | 
 | 	do { | 
 | 		if (bcap->bcnext == ap) { | 
 | 			bcap->bcnext = bcap->bcnext->bcnext; | 
 | 			spin_unlock_irqrestore(&bcs->aplock, flags); | 
 | 			return; | 
 | 		} | 
 | 		bcap = bcap->bcnext; | 
 | 	} while (bcap != NULL); | 
 | 	spin_unlock_irqrestore(&bcs->aplock, flags); | 
 | } | 
 |  | 
 | /* | 
 |  * release CAPI application | 
 |  */ | 
 | static void gigaset_release_appl(struct capi_ctr *ctr, u16 appl) | 
 | { | 
 | 	struct gigaset_capi_ctr *iif | 
 | 		= container_of(ctr, struct gigaset_capi_ctr, ctr); | 
 | 	struct cardstate *cs = iif->ctr.driverdata; | 
 | 	struct gigaset_capi_appl *ap, *tmp; | 
 | 	unsigned ch; | 
 |  | 
 | 	gig_dbg(DEBUG_CMD, "%s [%u]", __func__, appl); | 
 |  | 
 | 	list_for_each_entry_safe(ap, tmp, &iif->appls, ctrlist) | 
 | 		if (ap->id == appl) { | 
 | 			/* remove from any channels */ | 
 | 			for (ch = 0; ch < cs->channels; ch++) | 
 | 				remove_appl_from_channel(&cs->bcs[ch], ap); | 
 |  | 
 | 			/* remove from registration list */ | 
 | 			list_del(&ap->ctrlist); | 
 | 			kfree(ap); | 
 | 			dev_info(cs->dev, "application %u released\n", appl); | 
 | 		} | 
 | } | 
 |  | 
 | /* | 
 |  * ===================================================================== | 
 |  * outgoing CAPI message handler | 
 |  * ===================================================================== | 
 |  */ | 
 |  | 
 | /* | 
 |  * helper function: emit reply message with given Info value | 
 |  */ | 
 | static void send_conf(struct gigaset_capi_ctr *iif, | 
 | 		      struct gigaset_capi_appl *ap, | 
 | 		      struct sk_buff *skb, | 
 | 		      u16 info) | 
 | { | 
 | 	/* | 
 | 	 * _CONF replies always only have NCCI and Info parameters | 
 | 	 * so they'll fit into the _REQ message skb | 
 | 	 */ | 
 | 	capi_cmsg_answer(&iif->acmsg); | 
 | 	iif->acmsg.Info = info; | 
 | 	capi_cmsg2message(&iif->acmsg, skb->data); | 
 | 	__skb_trim(skb, CAPI_STDCONF_LEN); | 
 | 	dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); | 
 | 	capi_ctr_handle_message(&iif->ctr, ap->id, skb); | 
 | } | 
 |  | 
 | /* | 
 |  * process FACILITY_REQ message | 
 |  */ | 
 | static void do_facility_req(struct gigaset_capi_ctr *iif, | 
 | 			    struct gigaset_capi_appl *ap, | 
 | 			    struct sk_buff *skb) | 
 | { | 
 | 	struct cardstate *cs = iif->ctr.driverdata; | 
 | 	_cmsg *cmsg = &iif->acmsg; | 
 | 	struct sk_buff *cskb; | 
 | 	u8 *pparam; | 
 | 	unsigned int msgsize = CAPI_FACILITY_CONF_BASELEN; | 
 | 	u16 function, info; | 
 | 	static u8 confparam[10];	/* max. 9 octets + length byte */ | 
 |  | 
 | 	/* decode message */ | 
 | 	capi_message2cmsg(cmsg, skb->data); | 
 | 	dump_cmsg(DEBUG_CMD, __func__, cmsg); | 
 |  | 
 | 	/* | 
 | 	 * Facility Request Parameter is not decoded by capi_message2cmsg() | 
 | 	 * encoding depends on Facility Selector | 
 | 	 */ | 
 | 	switch (cmsg->FacilitySelector) { | 
 | 	case CAPI_FACILITY_DTMF:	/* ToDo */ | 
 | 		info = CapiFacilityNotSupported; | 
 | 		confparam[0] = 2;	/* length */ | 
 | 		/* DTMF information: Unknown DTMF request */ | 
 | 		capimsg_setu16(confparam, 1, 2); | 
 | 		break; | 
 |  | 
 | 	case CAPI_FACILITY_V42BIS:	/* not supported */ | 
 | 		info = CapiFacilityNotSupported; | 
 | 		confparam[0] = 2;	/* length */ | 
 | 		/* V.42 bis information: not available */ | 
 | 		capimsg_setu16(confparam, 1, 1); | 
 | 		break; | 
 |  | 
 | 	case CAPI_FACILITY_SUPPSVC: | 
 | 		/* decode Function parameter */ | 
 | 		pparam = cmsg->FacilityRequestParameter; | 
 | 		if (pparam == NULL || pparam[0] < 2) { | 
 | 			dev_notice(cs->dev, "%s: %s missing\n", "FACILITY_REQ", | 
 | 				   "Facility Request Parameter"); | 
 | 			send_conf(iif, ap, skb, CapiIllMessageParmCoding); | 
 | 			return; | 
 | 		} | 
 | 		function = CAPIMSG_U16(pparam, 1); | 
 | 		switch (function) { | 
 | 		case CAPI_SUPPSVC_GETSUPPORTED: | 
 | 			info = CapiSuccess; | 
 | 			/* Supplementary Service specific parameter */ | 
 | 			confparam[3] = 6;	/* length */ | 
 | 			/* Supplementary services info: Success */ | 
 | 			capimsg_setu16(confparam, 4, CapiSuccess); | 
 | 			/* Supported Services: none */ | 
 | 			capimsg_setu32(confparam, 6, 0); | 
 | 			break; | 
 | 		case CAPI_SUPPSVC_LISTEN: | 
 | 			if (pparam[0] < 7 || pparam[3] < 4) { | 
 | 				dev_notice(cs->dev, "%s: %s missing\n", | 
 | 					   "FACILITY_REQ", "Notification Mask"); | 
 | 				send_conf(iif, ap, skb, | 
 | 					  CapiIllMessageParmCoding); | 
 | 				return; | 
 | 			} | 
 | 			if (CAPIMSG_U32(pparam, 4) != 0) { | 
 | 				dev_notice(cs->dev, | 
 | 					   "%s: unsupported supplementary service notification mask 0x%x\n", | 
 | 					   "FACILITY_REQ", CAPIMSG_U32(pparam, 4)); | 
 | 				info = CapiFacilitySpecificFunctionNotSupported; | 
 | 				confparam[3] = 2;	/* length */ | 
 | 				capimsg_setu16(confparam, 4, | 
 | 					       CapiSupplementaryServiceNotSupported); | 
 | 			} | 
 | 			info = CapiSuccess; | 
 | 			confparam[3] = 2;	/* length */ | 
 | 			capimsg_setu16(confparam, 4, CapiSuccess); | 
 | 			break; | 
 |  | 
 | 		/* ToDo: add supported services */ | 
 |  | 
 | 		default: | 
 | 			dev_notice(cs->dev, | 
 | 				   "%s: unsupported supplementary service function 0x%04x\n", | 
 | 				   "FACILITY_REQ", function); | 
 | 			info = CapiFacilitySpecificFunctionNotSupported; | 
 | 			/* Supplementary Service specific parameter */ | 
 | 			confparam[3] = 2;	/* length */ | 
 | 			/* Supplementary services info: not supported */ | 
 | 			capimsg_setu16(confparam, 4, | 
 | 				       CapiSupplementaryServiceNotSupported); | 
 | 		} | 
 |  | 
 | 		/* Facility confirmation parameter */ | 
 | 		confparam[0] = confparam[3] + 3;	/* total length */ | 
 | 		/* Function: copy from _REQ message */ | 
 | 		capimsg_setu16(confparam, 1, function); | 
 | 		/* Supplementary Service specific parameter already set above */ | 
 | 		break; | 
 |  | 
 | 	case CAPI_FACILITY_WAKEUP:	/* ToDo */ | 
 | 		info = CapiFacilityNotSupported; | 
 | 		confparam[0] = 2;	/* length */ | 
 | 		/* Number of accepted awake request parameters: 0 */ | 
 | 		capimsg_setu16(confparam, 1, 0); | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		info = CapiFacilityNotSupported; | 
 | 		confparam[0] = 0;	/* empty struct */ | 
 | 	} | 
 |  | 
 | 	/* send FACILITY_CONF with given Info and confirmation parameter */ | 
 | 	capi_cmsg_answer(cmsg); | 
 | 	cmsg->Info = info; | 
 | 	cmsg->FacilityConfirmationParameter = confparam; | 
 | 	msgsize += confparam[0];	/* length */ | 
 | 	cskb = alloc_skb(msgsize, GFP_ATOMIC); | 
 | 	if (!cskb) { | 
 | 		dev_err(cs->dev, "%s: out of memory\n", __func__); | 
 | 		return; | 
 | 	} | 
 | 	capi_cmsg2message(cmsg, __skb_put(cskb, msgsize)); | 
 | 	dump_cmsg(DEBUG_CMD, __func__, cmsg); | 
 | 	capi_ctr_handle_message(&iif->ctr, ap->id, cskb); | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * process LISTEN_REQ message | 
 |  * just store the masks in the application data structure | 
 |  */ | 
 | static void do_listen_req(struct gigaset_capi_ctr *iif, | 
 | 			  struct gigaset_capi_appl *ap, | 
 | 			  struct sk_buff *skb) | 
 | { | 
 | 	/* decode message */ | 
 | 	capi_message2cmsg(&iif->acmsg, skb->data); | 
 | 	dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); | 
 |  | 
 | 	/* store listening parameters */ | 
 | 	ap->listenInfoMask = iif->acmsg.InfoMask; | 
 | 	ap->listenCIPmask = iif->acmsg.CIPmask; | 
 | 	send_conf(iif, ap, skb, CapiSuccess); | 
 | } | 
 |  | 
 | /* | 
 |  * process ALERT_REQ message | 
 |  * nothing to do, Gigaset always alerts anyway | 
 |  */ | 
 | static void do_alert_req(struct gigaset_capi_ctr *iif, | 
 | 			 struct gigaset_capi_appl *ap, | 
 | 			 struct sk_buff *skb) | 
 | { | 
 | 	/* decode message */ | 
 | 	capi_message2cmsg(&iif->acmsg, skb->data); | 
 | 	dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); | 
 | 	send_conf(iif, ap, skb, CapiAlertAlreadySent); | 
 | } | 
 |  | 
 | /* | 
 |  * process CONNECT_REQ message | 
 |  * allocate a B channel, prepare dial commands, queue a DIAL event, | 
 |  * emit CONNECT_CONF reply | 
 |  */ | 
 | static void do_connect_req(struct gigaset_capi_ctr *iif, | 
 | 			   struct gigaset_capi_appl *ap, | 
 | 			   struct sk_buff *skb) | 
 | { | 
 | 	struct cardstate *cs = iif->ctr.driverdata; | 
 | 	_cmsg *cmsg = &iif->acmsg; | 
 | 	struct bc_state *bcs; | 
 | 	char **commands; | 
 | 	char *s; | 
 | 	u8 *pp; | 
 | 	unsigned long flags; | 
 | 	int i, l, lbc, lhlc; | 
 | 	u16 info; | 
 |  | 
 | 	/* decode message */ | 
 | 	capi_message2cmsg(cmsg, skb->data); | 
 | 	dump_cmsg(DEBUG_CMD, __func__, cmsg); | 
 |  | 
 | 	/* get free B channel & construct PLCI */ | 
 | 	bcs = gigaset_get_free_channel(cs); | 
 | 	if (!bcs) { | 
 | 		dev_notice(cs->dev, "%s: no B channel available\n", | 
 | 			   "CONNECT_REQ"); | 
 | 		send_conf(iif, ap, skb, CapiNoPlciAvailable); | 
 | 		return; | 
 | 	} | 
 | 	spin_lock_irqsave(&bcs->aplock, flags); | 
 | 	if (bcs->ap != NULL || bcs->apconnstate != APCONN_NONE) | 
 | 		dev_warn(cs->dev, "%s: channel not properly cleared (%p/%d)\n", | 
 | 			 __func__, bcs->ap, bcs->apconnstate); | 
 | 	ap->bcnext = NULL; | 
 | 	bcs->ap = ap; | 
 | 	bcs->apconnstate = APCONN_SETUP; | 
 | 	spin_unlock_irqrestore(&bcs->aplock, flags); | 
 |  | 
 | 	bcs->rx_bufsize = ap->rp.datablklen; | 
 | 	dev_kfree_skb(bcs->rx_skb); | 
 | 	gigaset_new_rx_skb(bcs); | 
 | 	cmsg->adr.adrPLCI |= (bcs->channel + 1) << 8; | 
 |  | 
 | 	/* build command table */ | 
 | 	commands = kzalloc(AT_NUM * (sizeof *commands), GFP_KERNEL); | 
 | 	if (!commands) | 
 | 		goto oom; | 
 |  | 
 | 	/* encode parameter: Called party number */ | 
 | 	pp = cmsg->CalledPartyNumber; | 
 | 	if (pp == NULL || *pp == 0) { | 
 | 		dev_notice(cs->dev, "%s: %s missing\n", | 
 | 			   "CONNECT_REQ", "Called party number"); | 
 | 		info = CapiIllMessageParmCoding; | 
 | 		goto error; | 
 | 	} | 
 | 	l = *pp++; | 
 | 	/* check type of number/numbering plan byte */ | 
 | 	switch (*pp) { | 
 | 	case 0x80:	/* unknown type / unknown numbering plan */ | 
 | 	case 0x81:	/* unknown type / ISDN/Telephony numbering plan */ | 
 | 		break; | 
 | 	default:	/* others: warn about potential misinterpretation */ | 
 | 		dev_notice(cs->dev, "%s: %s type/plan 0x%02x unsupported\n", | 
 | 			   "CONNECT_REQ", "Called party number", *pp); | 
 | 	} | 
 | 	pp++; | 
 | 	l--; | 
 | 	/* translate "**" internal call prefix to CTP value */ | 
 | 	if (l >= 2 && pp[0] == '*' && pp[1] == '*') { | 
 | 		s = "^SCTP=0\r"; | 
 | 		pp += 2; | 
 | 		l -= 2; | 
 | 	} else { | 
 | 		s = "^SCTP=1\r"; | 
 | 	} | 
 | 	commands[AT_TYPE] = kstrdup(s, GFP_KERNEL); | 
 | 	if (!commands[AT_TYPE]) | 
 | 		goto oom; | 
 | 	commands[AT_DIAL] = kmalloc(l + 3, GFP_KERNEL); | 
 | 	if (!commands[AT_DIAL]) | 
 | 		goto oom; | 
 | 	snprintf(commands[AT_DIAL], l + 3, "D%.*s\r", l, pp); | 
 |  | 
 | 	/* encode parameter: Calling party number */ | 
 | 	pp = cmsg->CallingPartyNumber; | 
 | 	if (pp != NULL && *pp > 0) { | 
 | 		l = *pp++; | 
 |  | 
 | 		/* check type of number/numbering plan byte */ | 
 | 		/* ToDo: allow for/handle Ext=1? */ | 
 | 		switch (*pp) { | 
 | 		case 0x00:	/* unknown type / unknown numbering plan */ | 
 | 		case 0x01:	/* unknown type / ISDN/Telephony num. plan */ | 
 | 			break; | 
 | 		default: | 
 | 			dev_notice(cs->dev, | 
 | 				   "%s: %s type/plan 0x%02x unsupported\n", | 
 | 				   "CONNECT_REQ", "Calling party number", *pp); | 
 | 		} | 
 | 		pp++; | 
 | 		l--; | 
 |  | 
 | 		/* check presentation indicator */ | 
 | 		if (!l) { | 
 | 			dev_notice(cs->dev, "%s: %s IE truncated\n", | 
 | 				   "CONNECT_REQ", "Calling party number"); | 
 | 			info = CapiIllMessageParmCoding; | 
 | 			goto error; | 
 | 		} | 
 | 		switch (*pp & 0xfc) { /* ignore Screening indicator */ | 
 | 		case 0x80:	/* Presentation allowed */ | 
 | 			s = "^SCLIP=1\r"; | 
 | 			break; | 
 | 		case 0xa0:	/* Presentation restricted */ | 
 | 			s = "^SCLIP=0\r"; | 
 | 			break; | 
 | 		default: | 
 | 			dev_notice(cs->dev, "%s: invalid %s 0x%02x\n", | 
 | 				   "CONNECT_REQ", | 
 | 				   "Presentation/Screening indicator", | 
 | 				   *pp); | 
 | 			s = "^SCLIP=1\r"; | 
 | 		} | 
 | 		commands[AT_CLIP] = kstrdup(s, GFP_KERNEL); | 
 | 		if (!commands[AT_CLIP]) | 
 | 			goto oom; | 
 | 		pp++; | 
 | 		l--; | 
 |  | 
 | 		if (l) { | 
 | 			/* number */ | 
 | 			commands[AT_MSN] = kmalloc(l + 8, GFP_KERNEL); | 
 | 			if (!commands[AT_MSN]) | 
 | 				goto oom; | 
 | 			snprintf(commands[AT_MSN], l + 8, "^SMSN=%*s\r", l, pp); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* check parameter: CIP Value */ | 
 | 	if (cmsg->CIPValue >= ARRAY_SIZE(cip2bchlc) || | 
 | 	    (cmsg->CIPValue > 0 && cip2bchlc[cmsg->CIPValue].bc == NULL)) { | 
 | 		dev_notice(cs->dev, "%s: unknown CIP value %d\n", | 
 | 			   "CONNECT_REQ", cmsg->CIPValue); | 
 | 		info = CapiCipValueUnknown; | 
 | 		goto error; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * check/encode parameters: BC & HLC | 
 | 	 * must be encoded together as device doesn't accept HLC separately | 
 | 	 * explicit parameters override values derived from CIP | 
 | 	 */ | 
 |  | 
 | 	/* determine lengths */ | 
 | 	if (cmsg->BC && cmsg->BC[0])		/* BC specified explicitly */ | 
 | 		lbc = 2 * cmsg->BC[0]; | 
 | 	else if (cip2bchlc[cmsg->CIPValue].bc)	/* BC derived from CIP */ | 
 | 		lbc = strlen(cip2bchlc[cmsg->CIPValue].bc); | 
 | 	else					/* no BC */ | 
 | 		lbc = 0; | 
 | 	if (cmsg->HLC && cmsg->HLC[0])		/* HLC specified explicitly */ | 
 | 		lhlc = 2 * cmsg->HLC[0]; | 
 | 	else if (cip2bchlc[cmsg->CIPValue].hlc)	/* HLC derived from CIP */ | 
 | 		lhlc = strlen(cip2bchlc[cmsg->CIPValue].hlc); | 
 | 	else					/* no HLC */ | 
 | 		lhlc = 0; | 
 |  | 
 | 	if (lbc) { | 
 | 		/* have BC: allocate and assemble command string */ | 
 | 		l = lbc + 7;		/* "^SBC=" + value + "\r" + null byte */ | 
 | 		if (lhlc) | 
 | 			l += lhlc + 7;	/* ";^SHLC=" + value */ | 
 | 		commands[AT_BC] = kmalloc(l, GFP_KERNEL); | 
 | 		if (!commands[AT_BC]) | 
 | 			goto oom; | 
 | 		strcpy(commands[AT_BC], "^SBC="); | 
 | 		if (cmsg->BC && cmsg->BC[0])	/* BC specified explicitly */ | 
 | 			decode_ie(cmsg->BC, commands[AT_BC] + 5); | 
 | 		else				/* BC derived from CIP */ | 
 | 			strcpy(commands[AT_BC] + 5, | 
 | 			       cip2bchlc[cmsg->CIPValue].bc); | 
 | 		if (lhlc) { | 
 | 			strcpy(commands[AT_BC] + lbc + 5, ";^SHLC="); | 
 | 			if (cmsg->HLC && cmsg->HLC[0]) | 
 | 				/* HLC specified explicitly */ | 
 | 				decode_ie(cmsg->HLC, | 
 | 					  commands[AT_BC] + lbc + 12); | 
 | 			else	/* HLC derived from CIP */ | 
 | 				strcpy(commands[AT_BC] + lbc + 12, | 
 | 				       cip2bchlc[cmsg->CIPValue].hlc); | 
 | 		} | 
 | 		strcpy(commands[AT_BC] + l - 2, "\r"); | 
 | 	} else { | 
 | 		/* no BC */ | 
 | 		if (lhlc) { | 
 | 			dev_notice(cs->dev, "%s: cannot set HLC without BC\n", | 
 | 				   "CONNECT_REQ"); | 
 | 			info = CapiIllMessageParmCoding; /* ? */ | 
 | 			goto error; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* check/encode parameter: B Protocol */ | 
 | 	if (cmsg->BProtocol == CAPI_DEFAULT) { | 
 | 		bcs->proto2 = L2_HDLC; | 
 | 		dev_warn(cs->dev, | 
 | 			 "B2 Protocol X.75 SLP unsupported, using Transparent\n"); | 
 | 	} else { | 
 | 		switch (cmsg->B1protocol) { | 
 | 		case 0: | 
 | 			bcs->proto2 = L2_HDLC; | 
 | 			break; | 
 | 		case 1: | 
 | 			bcs->proto2 = L2_VOICE; | 
 | 			break; | 
 | 		default: | 
 | 			dev_warn(cs->dev, | 
 | 				 "B1 Protocol %u unsupported, using Transparent\n", | 
 | 				 cmsg->B1protocol); | 
 | 			bcs->proto2 = L2_VOICE; | 
 | 		} | 
 | 		if (cmsg->B2protocol != 1) | 
 | 			dev_warn(cs->dev, | 
 | 				 "B2 Protocol %u unsupported, using Transparent\n", | 
 | 				 cmsg->B2protocol); | 
 | 		if (cmsg->B3protocol != 0) | 
 | 			dev_warn(cs->dev, | 
 | 				 "B3 Protocol %u unsupported, using Transparent\n", | 
 | 				 cmsg->B3protocol); | 
 | 		ignore_cstruct_param(cs, cmsg->B1configuration, | 
 | 				     "CONNECT_REQ", "B1 Configuration"); | 
 | 		ignore_cstruct_param(cs, cmsg->B2configuration, | 
 | 				     "CONNECT_REQ", "B2 Configuration"); | 
 | 		ignore_cstruct_param(cs, cmsg->B3configuration, | 
 | 				     "CONNECT_REQ", "B3 Configuration"); | 
 | 	} | 
 | 	commands[AT_PROTO] = kmalloc(9, GFP_KERNEL); | 
 | 	if (!commands[AT_PROTO]) | 
 | 		goto oom; | 
 | 	snprintf(commands[AT_PROTO], 9, "^SBPR=%u\r", bcs->proto2); | 
 |  | 
 | 	/* ToDo: check/encode remaining parameters */ | 
 | 	ignore_cstruct_param(cs, cmsg->CalledPartySubaddress, | 
 | 			     "CONNECT_REQ", "Called pty subaddr"); | 
 | 	ignore_cstruct_param(cs, cmsg->CallingPartySubaddress, | 
 | 			     "CONNECT_REQ", "Calling pty subaddr"); | 
 | 	ignore_cstruct_param(cs, cmsg->LLC, | 
 | 			     "CONNECT_REQ", "LLC"); | 
 | 	if (cmsg->AdditionalInfo != CAPI_DEFAULT) { | 
 | 		ignore_cstruct_param(cs, cmsg->BChannelinformation, | 
 | 				     "CONNECT_REQ", "B Channel Information"); | 
 | 		ignore_cstruct_param(cs, cmsg->Keypadfacility, | 
 | 				     "CONNECT_REQ", "Keypad Facility"); | 
 | 		ignore_cstruct_param(cs, cmsg->Useruserdata, | 
 | 				     "CONNECT_REQ", "User-User Data"); | 
 | 		ignore_cstruct_param(cs, cmsg->Facilitydataarray, | 
 | 				     "CONNECT_REQ", "Facility Data Array"); | 
 | 	} | 
 |  | 
 | 	/* encode parameter: B channel to use */ | 
 | 	commands[AT_ISO] = kmalloc(9, GFP_KERNEL); | 
 | 	if (!commands[AT_ISO]) | 
 | 		goto oom; | 
 | 	snprintf(commands[AT_ISO], 9, "^SISO=%u\r", | 
 | 		 (unsigned) bcs->channel + 1); | 
 |  | 
 | 	/* queue & schedule EV_DIAL event */ | 
 | 	if (!gigaset_add_event(cs, &bcs->at_state, EV_DIAL, commands, | 
 | 			       bcs->at_state.seq_index, NULL)) { | 
 | 		info = CAPI_MSGOSRESOURCEERR; | 
 | 		goto error; | 
 | 	} | 
 | 	gigaset_schedule_event(cs); | 
 | 	send_conf(iif, ap, skb, CapiSuccess); | 
 | 	return; | 
 |  | 
 | oom: | 
 | 	dev_err(cs->dev, "%s: out of memory\n", __func__); | 
 | 	info = CAPI_MSGOSRESOURCEERR; | 
 | error: | 
 | 	if (commands) | 
 | 		for (i = 0; i < AT_NUM; i++) | 
 | 			kfree(commands[i]); | 
 | 	kfree(commands); | 
 | 	gigaset_free_channel(bcs); | 
 | 	send_conf(iif, ap, skb, info); | 
 | } | 
 |  | 
 | /* | 
 |  * process CONNECT_RESP message | 
 |  * checks protocol parameters and queues an ACCEPT or HUP event | 
 |  */ | 
 | static void do_connect_resp(struct gigaset_capi_ctr *iif, | 
 | 			    struct gigaset_capi_appl *ap, | 
 | 			    struct sk_buff *skb) | 
 | { | 
 | 	struct cardstate *cs = iif->ctr.driverdata; | 
 | 	_cmsg *cmsg = &iif->acmsg; | 
 | 	struct bc_state *bcs; | 
 | 	struct gigaset_capi_appl *oap; | 
 | 	unsigned long flags; | 
 | 	int channel; | 
 |  | 
 | 	/* decode message */ | 
 | 	capi_message2cmsg(cmsg, skb->data); | 
 | 	dump_cmsg(DEBUG_CMD, __func__, cmsg); | 
 | 	dev_kfree_skb_any(skb); | 
 |  | 
 | 	/* extract and check channel number from PLCI */ | 
 | 	channel = (cmsg->adr.adrPLCI >> 8) & 0xff; | 
 | 	if (!channel || channel > cs->channels) { | 
 | 		dev_notice(cs->dev, "%s: invalid %s 0x%02x\n", | 
 | 			   "CONNECT_RESP", "PLCI", cmsg->adr.adrPLCI); | 
 | 		return; | 
 | 	} | 
 | 	bcs = cs->bcs + channel - 1; | 
 |  | 
 | 	switch (cmsg->Reject) { | 
 | 	case 0:		/* Accept */ | 
 | 		/* drop all competing applications, keep only this one */ | 
 | 		spin_lock_irqsave(&bcs->aplock, flags); | 
 | 		while (bcs->ap != NULL) { | 
 | 			oap = bcs->ap; | 
 | 			bcs->ap = oap->bcnext; | 
 | 			if (oap != ap) { | 
 | 				spin_unlock_irqrestore(&bcs->aplock, flags); | 
 | 				send_disconnect_ind(bcs, oap, | 
 | 						    CapiCallGivenToOtherApplication); | 
 | 				spin_lock_irqsave(&bcs->aplock, flags); | 
 | 			} | 
 | 		} | 
 | 		ap->bcnext = NULL; | 
 | 		bcs->ap = ap; | 
 | 		spin_unlock_irqrestore(&bcs->aplock, flags); | 
 |  | 
 | 		bcs->rx_bufsize = ap->rp.datablklen; | 
 | 		dev_kfree_skb(bcs->rx_skb); | 
 | 		gigaset_new_rx_skb(bcs); | 
 | 		bcs->chstate |= CHS_NOTIFY_LL; | 
 |  | 
 | 		/* check/encode B channel protocol */ | 
 | 		if (cmsg->BProtocol == CAPI_DEFAULT) { | 
 | 			bcs->proto2 = L2_HDLC; | 
 | 			dev_warn(cs->dev, | 
 | 				 "B2 Protocol X.75 SLP unsupported, using Transparent\n"); | 
 | 		} else { | 
 | 			switch (cmsg->B1protocol) { | 
 | 			case 0: | 
 | 				bcs->proto2 = L2_HDLC; | 
 | 				break; | 
 | 			case 1: | 
 | 				bcs->proto2 = L2_VOICE; | 
 | 				break; | 
 | 			default: | 
 | 				dev_warn(cs->dev, | 
 | 					 "B1 Protocol %u unsupported, using Transparent\n", | 
 | 					 cmsg->B1protocol); | 
 | 				bcs->proto2 = L2_VOICE; | 
 | 			} | 
 | 			if (cmsg->B2protocol != 1) | 
 | 				dev_warn(cs->dev, | 
 | 					 "B2 Protocol %u unsupported, using Transparent\n", | 
 | 					 cmsg->B2protocol); | 
 | 			if (cmsg->B3protocol != 0) | 
 | 				dev_warn(cs->dev, | 
 | 					 "B3 Protocol %u unsupported, using Transparent\n", | 
 | 					 cmsg->B3protocol); | 
 | 			ignore_cstruct_param(cs, cmsg->B1configuration, | 
 | 					     "CONNECT_RESP", "B1 Configuration"); | 
 | 			ignore_cstruct_param(cs, cmsg->B2configuration, | 
 | 					     "CONNECT_RESP", "B2 Configuration"); | 
 | 			ignore_cstruct_param(cs, cmsg->B3configuration, | 
 | 					     "CONNECT_RESP", "B3 Configuration"); | 
 | 		} | 
 |  | 
 | 		/* ToDo: check/encode remaining parameters */ | 
 | 		ignore_cstruct_param(cs, cmsg->ConnectedNumber, | 
 | 				     "CONNECT_RESP", "Connected Number"); | 
 | 		ignore_cstruct_param(cs, cmsg->ConnectedSubaddress, | 
 | 				     "CONNECT_RESP", "Connected Subaddress"); | 
 | 		ignore_cstruct_param(cs, cmsg->LLC, | 
 | 				     "CONNECT_RESP", "LLC"); | 
 | 		if (cmsg->AdditionalInfo != CAPI_DEFAULT) { | 
 | 			ignore_cstruct_param(cs, cmsg->BChannelinformation, | 
 | 					     "CONNECT_RESP", "BChannel Information"); | 
 | 			ignore_cstruct_param(cs, cmsg->Keypadfacility, | 
 | 					     "CONNECT_RESP", "Keypad Facility"); | 
 | 			ignore_cstruct_param(cs, cmsg->Useruserdata, | 
 | 					     "CONNECT_RESP", "User-User Data"); | 
 | 			ignore_cstruct_param(cs, cmsg->Facilitydataarray, | 
 | 					     "CONNECT_RESP", "Facility Data Array"); | 
 | 		} | 
 |  | 
 | 		/* Accept call */ | 
 | 		if (!gigaset_add_event(cs, &cs->bcs[channel - 1].at_state, | 
 | 				       EV_ACCEPT, NULL, 0, NULL)) | 
 | 			return; | 
 | 		gigaset_schedule_event(cs); | 
 | 		return; | 
 |  | 
 | 	case 1:			/* Ignore */ | 
 | 		/* send DISCONNECT_IND to this application */ | 
 | 		send_disconnect_ind(bcs, ap, 0); | 
 |  | 
 | 		/* remove it from the list of listening apps */ | 
 | 		spin_lock_irqsave(&bcs->aplock, flags); | 
 | 		if (bcs->ap == ap) { | 
 | 			bcs->ap = ap->bcnext; | 
 | 			if (bcs->ap == NULL) { | 
 | 				/* last one: stop ev-layer hupD notifications */ | 
 | 				bcs->apconnstate = APCONN_NONE; | 
 | 				bcs->chstate &= ~CHS_NOTIFY_LL; | 
 | 			} | 
 | 			spin_unlock_irqrestore(&bcs->aplock, flags); | 
 | 			return; | 
 | 		} | 
 | 		for (oap = bcs->ap; oap != NULL; oap = oap->bcnext) { | 
 | 			if (oap->bcnext == ap) { | 
 | 				oap->bcnext = oap->bcnext->bcnext; | 
 | 				spin_unlock_irqrestore(&bcs->aplock, flags); | 
 | 				return; | 
 | 			} | 
 | 		} | 
 | 		spin_unlock_irqrestore(&bcs->aplock, flags); | 
 | 		dev_err(cs->dev, "%s: application %u not found\n", | 
 | 			__func__, ap->id); | 
 | 		return; | 
 |  | 
 | 	default:		/* Reject */ | 
 | 		/* drop all competing applications, keep only this one */ | 
 | 		spin_lock_irqsave(&bcs->aplock, flags); | 
 | 		while (bcs->ap != NULL) { | 
 | 			oap = bcs->ap; | 
 | 			bcs->ap = oap->bcnext; | 
 | 			if (oap != ap) { | 
 | 				spin_unlock_irqrestore(&bcs->aplock, flags); | 
 | 				send_disconnect_ind(bcs, oap, | 
 | 						    CapiCallGivenToOtherApplication); | 
 | 				spin_lock_irqsave(&bcs->aplock, flags); | 
 | 			} | 
 | 		} | 
 | 		ap->bcnext = NULL; | 
 | 		bcs->ap = ap; | 
 | 		spin_unlock_irqrestore(&bcs->aplock, flags); | 
 |  | 
 | 		/* reject call - will trigger DISCONNECT_IND for this app */ | 
 | 		dev_info(cs->dev, "%s: Reject=%x\n", | 
 | 			 "CONNECT_RESP", cmsg->Reject); | 
 | 		if (!gigaset_add_event(cs, &cs->bcs[channel - 1].at_state, | 
 | 				       EV_HUP, NULL, 0, NULL)) | 
 | 			return; | 
 | 		gigaset_schedule_event(cs); | 
 | 		return; | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * process CONNECT_B3_REQ message | 
 |  * build NCCI and emit CONNECT_B3_CONF reply | 
 |  */ | 
 | static void do_connect_b3_req(struct gigaset_capi_ctr *iif, | 
 | 			      struct gigaset_capi_appl *ap, | 
 | 			      struct sk_buff *skb) | 
 | { | 
 | 	struct cardstate *cs = iif->ctr.driverdata; | 
 | 	_cmsg *cmsg = &iif->acmsg; | 
 | 	struct bc_state *bcs; | 
 | 	int channel; | 
 |  | 
 | 	/* decode message */ | 
 | 	capi_message2cmsg(cmsg, skb->data); | 
 | 	dump_cmsg(DEBUG_CMD, __func__, cmsg); | 
 |  | 
 | 	/* extract and check channel number from PLCI */ | 
 | 	channel = (cmsg->adr.adrPLCI >> 8) & 0xff; | 
 | 	if (!channel || channel > cs->channels) { | 
 | 		dev_notice(cs->dev, "%s: invalid %s 0x%02x\n", | 
 | 			   "CONNECT_B3_REQ", "PLCI", cmsg->adr.adrPLCI); | 
 | 		send_conf(iif, ap, skb, CapiIllContrPlciNcci); | 
 | 		return; | 
 | 	} | 
 | 	bcs = &cs->bcs[channel - 1]; | 
 |  | 
 | 	/* mark logical connection active */ | 
 | 	bcs->apconnstate = APCONN_ACTIVE; | 
 |  | 
 | 	/* build NCCI: always 1 (one B3 connection only) */ | 
 | 	cmsg->adr.adrNCCI |= 1 << 16; | 
 |  | 
 | 	/* NCPI parameter: not applicable for B3 Transparent */ | 
 | 	ignore_cstruct_param(cs, cmsg->NCPI, "CONNECT_B3_REQ", "NCPI"); | 
 | 	send_conf(iif, ap, skb, | 
 | 		  (cmsg->NCPI && cmsg->NCPI[0]) ? | 
 | 		  CapiNcpiNotSupportedByProtocol : CapiSuccess); | 
 | } | 
 |  | 
 | /* | 
 |  * process CONNECT_B3_RESP message | 
 |  * Depending on the Reject parameter, either emit CONNECT_B3_ACTIVE_IND | 
 |  * or queue EV_HUP and emit DISCONNECT_B3_IND. | 
 |  * The emitted message is always shorter than the received one, | 
 |  * allowing to reuse the skb. | 
 |  */ | 
 | static void do_connect_b3_resp(struct gigaset_capi_ctr *iif, | 
 | 			       struct gigaset_capi_appl *ap, | 
 | 			       struct sk_buff *skb) | 
 | { | 
 | 	struct cardstate *cs = iif->ctr.driverdata; | 
 | 	_cmsg *cmsg = &iif->acmsg; | 
 | 	struct bc_state *bcs; | 
 | 	int channel; | 
 | 	unsigned int msgsize; | 
 | 	u8 command; | 
 |  | 
 | 	/* decode message */ | 
 | 	capi_message2cmsg(cmsg, skb->data); | 
 | 	dump_cmsg(DEBUG_CMD, __func__, cmsg); | 
 |  | 
 | 	/* extract and check channel number and NCCI */ | 
 | 	channel = (cmsg->adr.adrNCCI >> 8) & 0xff; | 
 | 	if (!channel || channel > cs->channels || | 
 | 	    ((cmsg->adr.adrNCCI >> 16) & 0xffff) != 1) { | 
 | 		dev_notice(cs->dev, "%s: invalid %s 0x%02x\n", | 
 | 			   "CONNECT_B3_RESP", "NCCI", cmsg->adr.adrNCCI); | 
 | 		dev_kfree_skb_any(skb); | 
 | 		return; | 
 | 	} | 
 | 	bcs = &cs->bcs[channel - 1]; | 
 |  | 
 | 	if (cmsg->Reject) { | 
 | 		/* Reject: clear B3 connect received flag */ | 
 | 		bcs->apconnstate = APCONN_SETUP; | 
 |  | 
 | 		/* trigger hangup, causing eventual DISCONNECT_IND */ | 
 | 		if (!gigaset_add_event(cs, &bcs->at_state, | 
 | 				       EV_HUP, NULL, 0, NULL)) { | 
 | 			dev_kfree_skb_any(skb); | 
 | 			return; | 
 | 		} | 
 | 		gigaset_schedule_event(cs); | 
 |  | 
 | 		/* emit DISCONNECT_B3_IND */ | 
 | 		command = CAPI_DISCONNECT_B3; | 
 | 		msgsize = CAPI_DISCONNECT_B3_IND_BASELEN; | 
 | 	} else { | 
 | 		/* | 
 | 		 * Accept: emit CONNECT_B3_ACTIVE_IND immediately, as | 
 | 		 * we only send CONNECT_B3_IND if the B channel is up | 
 | 		 */ | 
 | 		command = CAPI_CONNECT_B3_ACTIVE; | 
 | 		msgsize = CAPI_CONNECT_B3_ACTIVE_IND_BASELEN; | 
 | 	} | 
 | 	capi_cmsg_header(cmsg, ap->id, command, CAPI_IND, | 
 | 			 ap->nextMessageNumber++, cmsg->adr.adrNCCI); | 
 | 	__skb_trim(skb, msgsize); | 
 | 	capi_cmsg2message(cmsg, skb->data); | 
 | 	dump_cmsg(DEBUG_CMD, __func__, cmsg); | 
 | 	capi_ctr_handle_message(&iif->ctr, ap->id, skb); | 
 | } | 
 |  | 
 | /* | 
 |  * process DISCONNECT_REQ message | 
 |  * schedule EV_HUP and emit DISCONNECT_B3_IND if necessary, | 
 |  * emit DISCONNECT_CONF reply | 
 |  */ | 
 | static void do_disconnect_req(struct gigaset_capi_ctr *iif, | 
 | 			      struct gigaset_capi_appl *ap, | 
 | 			      struct sk_buff *skb) | 
 | { | 
 | 	struct cardstate *cs = iif->ctr.driverdata; | 
 | 	_cmsg *cmsg = &iif->acmsg; | 
 | 	struct bc_state *bcs; | 
 | 	_cmsg *b3cmsg; | 
 | 	struct sk_buff *b3skb; | 
 | 	int channel; | 
 |  | 
 | 	/* decode message */ | 
 | 	capi_message2cmsg(cmsg, skb->data); | 
 | 	dump_cmsg(DEBUG_CMD, __func__, cmsg); | 
 |  | 
 | 	/* extract and check channel number from PLCI */ | 
 | 	channel = (cmsg->adr.adrPLCI >> 8) & 0xff; | 
 | 	if (!channel || channel > cs->channels) { | 
 | 		dev_notice(cs->dev, "%s: invalid %s 0x%02x\n", | 
 | 			   "DISCONNECT_REQ", "PLCI", cmsg->adr.adrPLCI); | 
 | 		send_conf(iif, ap, skb, CapiIllContrPlciNcci); | 
 | 		return; | 
 | 	} | 
 | 	bcs = cs->bcs + channel - 1; | 
 |  | 
 | 	/* ToDo: process parameter: Additional info */ | 
 | 	if (cmsg->AdditionalInfo != CAPI_DEFAULT) { | 
 | 		ignore_cstruct_param(cs, cmsg->BChannelinformation, | 
 | 				     "DISCONNECT_REQ", "B Channel Information"); | 
 | 		ignore_cstruct_param(cs, cmsg->Keypadfacility, | 
 | 				     "DISCONNECT_REQ", "Keypad Facility"); | 
 | 		ignore_cstruct_param(cs, cmsg->Useruserdata, | 
 | 				     "DISCONNECT_REQ", "User-User Data"); | 
 | 		ignore_cstruct_param(cs, cmsg->Facilitydataarray, | 
 | 				     "DISCONNECT_REQ", "Facility Data Array"); | 
 | 	} | 
 |  | 
 | 	/* skip if DISCONNECT_IND already sent */ | 
 | 	if (!bcs->apconnstate) | 
 | 		return; | 
 |  | 
 | 	/* check for active logical connection */ | 
 | 	if (bcs->apconnstate >= APCONN_ACTIVE) { | 
 | 		/* clear it */ | 
 | 		bcs->apconnstate = APCONN_SETUP; | 
 |  | 
 | 		/* | 
 | 		 * emit DISCONNECT_B3_IND with cause 0x3301 | 
 | 		 * use separate cmsg structure, as the content of iif->acmsg | 
 | 		 * is still needed for creating the _CONF message | 
 | 		 */ | 
 | 		b3cmsg = kmalloc(sizeof(*b3cmsg), GFP_KERNEL); | 
 | 		if (!b3cmsg) { | 
 | 			dev_err(cs->dev, "%s: out of memory\n", __func__); | 
 | 			send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR); | 
 | 			return; | 
 | 		} | 
 | 		capi_cmsg_header(b3cmsg, ap->id, CAPI_DISCONNECT_B3, CAPI_IND, | 
 | 				 ap->nextMessageNumber++, | 
 | 				 cmsg->adr.adrPLCI | (1 << 16)); | 
 | 		b3cmsg->Reason_B3 = CapiProtocolErrorLayer1; | 
 | 		b3skb = alloc_skb(CAPI_DISCONNECT_B3_IND_BASELEN, GFP_KERNEL); | 
 | 		if (b3skb == NULL) { | 
 | 			dev_err(cs->dev, "%s: out of memory\n", __func__); | 
 | 			send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR); | 
 | 			kfree(b3cmsg); | 
 | 			return; | 
 | 		} | 
 | 		capi_cmsg2message(b3cmsg, | 
 | 				  __skb_put(b3skb, CAPI_DISCONNECT_B3_IND_BASELEN)); | 
 | 		dump_cmsg(DEBUG_CMD, __func__, b3cmsg); | 
 | 		kfree(b3cmsg); | 
 | 		capi_ctr_handle_message(&iif->ctr, ap->id, b3skb); | 
 | 	} | 
 |  | 
 | 	/* trigger hangup, causing eventual DISCONNECT_IND */ | 
 | 	if (!gigaset_add_event(cs, &bcs->at_state, EV_HUP, NULL, 0, NULL)) { | 
 | 		send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR); | 
 | 		return; | 
 | 	} | 
 | 	gigaset_schedule_event(cs); | 
 |  | 
 | 	/* emit reply */ | 
 | 	send_conf(iif, ap, skb, CapiSuccess); | 
 | } | 
 |  | 
 | /* | 
 |  * process DISCONNECT_B3_REQ message | 
 |  * schedule EV_HUP and emit DISCONNECT_B3_CONF reply | 
 |  */ | 
 | static void do_disconnect_b3_req(struct gigaset_capi_ctr *iif, | 
 | 				 struct gigaset_capi_appl *ap, | 
 | 				 struct sk_buff *skb) | 
 | { | 
 | 	struct cardstate *cs = iif->ctr.driverdata; | 
 | 	_cmsg *cmsg = &iif->acmsg; | 
 | 	struct bc_state *bcs; | 
 | 	int channel; | 
 |  | 
 | 	/* decode message */ | 
 | 	capi_message2cmsg(cmsg, skb->data); | 
 | 	dump_cmsg(DEBUG_CMD, __func__, cmsg); | 
 |  | 
 | 	/* extract and check channel number and NCCI */ | 
 | 	channel = (cmsg->adr.adrNCCI >> 8) & 0xff; | 
 | 	if (!channel || channel > cs->channels || | 
 | 	    ((cmsg->adr.adrNCCI >> 16) & 0xffff) != 1) { | 
 | 		dev_notice(cs->dev, "%s: invalid %s 0x%02x\n", | 
 | 			   "DISCONNECT_B3_REQ", "NCCI", cmsg->adr.adrNCCI); | 
 | 		send_conf(iif, ap, skb, CapiIllContrPlciNcci); | 
 | 		return; | 
 | 	} | 
 | 	bcs = &cs->bcs[channel - 1]; | 
 |  | 
 | 	/* reject if logical connection not active */ | 
 | 	if (bcs->apconnstate < APCONN_ACTIVE) { | 
 | 		send_conf(iif, ap, skb, | 
 | 			  CapiMessageNotSupportedInCurrentState); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* trigger hangup, causing eventual DISCONNECT_B3_IND */ | 
 | 	if (!gigaset_add_event(cs, &bcs->at_state, EV_HUP, NULL, 0, NULL)) { | 
 | 		send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR); | 
 | 		return; | 
 | 	} | 
 | 	gigaset_schedule_event(cs); | 
 |  | 
 | 	/* NCPI parameter: not applicable for B3 Transparent */ | 
 | 	ignore_cstruct_param(cs, cmsg->NCPI, | 
 | 			     "DISCONNECT_B3_REQ", "NCPI"); | 
 | 	send_conf(iif, ap, skb, | 
 | 		  (cmsg->NCPI && cmsg->NCPI[0]) ? | 
 | 		  CapiNcpiNotSupportedByProtocol : CapiSuccess); | 
 | } | 
 |  | 
 | /* | 
 |  * process DATA_B3_REQ message | 
 |  */ | 
 | static void do_data_b3_req(struct gigaset_capi_ctr *iif, | 
 | 			   struct gigaset_capi_appl *ap, | 
 | 			   struct sk_buff *skb) | 
 | { | 
 | 	struct cardstate *cs = iif->ctr.driverdata; | 
 | 	struct bc_state *bcs; | 
 | 	int channel = CAPIMSG_PLCI_PART(skb->data); | 
 | 	u16 ncci = CAPIMSG_NCCI_PART(skb->data); | 
 | 	u16 msglen = CAPIMSG_LEN(skb->data); | 
 | 	u16 datalen = CAPIMSG_DATALEN(skb->data); | 
 | 	u16 flags = CAPIMSG_FLAGS(skb->data); | 
 | 	u16 msgid = CAPIMSG_MSGID(skb->data); | 
 | 	u16 handle = CAPIMSG_HANDLE_REQ(skb->data); | 
 |  | 
 | 	/* frequent message, avoid _cmsg overhead */ | 
 | 	dump_rawmsg(DEBUG_MCMD, __func__, skb->data); | 
 |  | 
 | 	/* check parameters */ | 
 | 	if (channel == 0 || channel > cs->channels || ncci != 1) { | 
 | 		dev_notice(cs->dev, "%s: invalid %s 0x%02x\n", | 
 | 			   "DATA_B3_REQ", "NCCI", CAPIMSG_NCCI(skb->data)); | 
 | 		send_conf(iif, ap, skb, CapiIllContrPlciNcci); | 
 | 		return; | 
 | 	} | 
 | 	bcs = &cs->bcs[channel - 1]; | 
 | 	if (msglen != CAPI_DATA_B3_REQ_LEN && msglen != CAPI_DATA_B3_REQ_LEN64) | 
 | 		dev_notice(cs->dev, "%s: unexpected length %d\n", | 
 | 			   "DATA_B3_REQ", msglen); | 
 | 	if (msglen + datalen != skb->len) | 
 | 		dev_notice(cs->dev, "%s: length mismatch (%d+%d!=%d)\n", | 
 | 			   "DATA_B3_REQ", msglen, datalen, skb->len); | 
 | 	if (msglen + datalen > skb->len) { | 
 | 		/* message too short for announced data length */ | 
 | 		send_conf(iif, ap, skb, CapiIllMessageParmCoding); /* ? */ | 
 | 		return; | 
 | 	} | 
 | 	if (flags & CAPI_FLAGS_RESERVED) { | 
 | 		dev_notice(cs->dev, "%s: reserved flags set (%x)\n", | 
 | 			   "DATA_B3_REQ", flags); | 
 | 		send_conf(iif, ap, skb, CapiIllMessageParmCoding); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* reject if logical connection not active */ | 
 | 	if (bcs->apconnstate < APCONN_ACTIVE) { | 
 | 		send_conf(iif, ap, skb, CapiMessageNotSupportedInCurrentState); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* pull CAPI message into link layer header */ | 
 | 	skb_reset_mac_header(skb); | 
 | 	skb->mac_len = msglen; | 
 | 	skb_pull(skb, msglen); | 
 |  | 
 | 	/* pass to device-specific module */ | 
 | 	if (cs->ops->send_skb(bcs, skb) < 0) { | 
 | 		send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * DATA_B3_CONF will be sent by gigaset_skb_sent() only if "delivery | 
 | 	 * confirmation" bit is set; otherwise we have to send it now | 
 | 	 */ | 
 | 	if (!(flags & CAPI_FLAGS_DELIVERY_CONFIRMATION)) | 
 | 		send_data_b3_conf(cs, &iif->ctr, ap->id, msgid, channel, handle, | 
 | 				  flags ? CapiFlagsNotSupportedByProtocol | 
 | 				  : CAPI_NOERROR); | 
 | } | 
 |  | 
 | /* | 
 |  * process RESET_B3_REQ message | 
 |  * just always reply "not supported by current protocol" | 
 |  */ | 
 | static void do_reset_b3_req(struct gigaset_capi_ctr *iif, | 
 | 			    struct gigaset_capi_appl *ap, | 
 | 			    struct sk_buff *skb) | 
 | { | 
 | 	/* decode message */ | 
 | 	capi_message2cmsg(&iif->acmsg, skb->data); | 
 | 	dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); | 
 | 	send_conf(iif, ap, skb, | 
 | 		  CapiResetProcedureNotSupportedByCurrentProtocol); | 
 | } | 
 |  | 
 | /* | 
 |  * unsupported CAPI message handler | 
 |  */ | 
 | static void do_unsupported(struct gigaset_capi_ctr *iif, | 
 | 			   struct gigaset_capi_appl *ap, | 
 | 			   struct sk_buff *skb) | 
 | { | 
 | 	/* decode message */ | 
 | 	capi_message2cmsg(&iif->acmsg, skb->data); | 
 | 	dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); | 
 | 	send_conf(iif, ap, skb, CapiMessageNotSupportedInCurrentState); | 
 | } | 
 |  | 
 | /* | 
 |  * CAPI message handler: no-op | 
 |  */ | 
 | static void do_nothing(struct gigaset_capi_ctr *iif, | 
 | 		       struct gigaset_capi_appl *ap, | 
 | 		       struct sk_buff *skb) | 
 | { | 
 | 	/* decode message */ | 
 | 	capi_message2cmsg(&iif->acmsg, skb->data); | 
 | 	dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); | 
 | 	dev_kfree_skb_any(skb); | 
 | } | 
 |  | 
 | static void do_data_b3_resp(struct gigaset_capi_ctr *iif, | 
 | 			    struct gigaset_capi_appl *ap, | 
 | 			    struct sk_buff *skb) | 
 | { | 
 | 	dump_rawmsg(DEBUG_MCMD, __func__, skb->data); | 
 | 	dev_kfree_skb_any(skb); | 
 | } | 
 |  | 
 | /* table of outgoing CAPI message handlers with lookup function */ | 
 | typedef void (*capi_send_handler_t)(struct gigaset_capi_ctr *, | 
 | 				    struct gigaset_capi_appl *, | 
 | 				    struct sk_buff *); | 
 |  | 
 | static struct { | 
 | 	u16 cmd; | 
 | 	capi_send_handler_t handler; | 
 | } capi_send_handler_table[] = { | 
 | 	/* most frequent messages first for faster lookup */ | 
 | 	{ CAPI_DATA_B3_REQ, do_data_b3_req }, | 
 | 	{ CAPI_DATA_B3_RESP, do_data_b3_resp }, | 
 |  | 
 | 	{ CAPI_ALERT_REQ, do_alert_req }, | 
 | 	{ CAPI_CONNECT_ACTIVE_RESP, do_nothing }, | 
 | 	{ CAPI_CONNECT_B3_ACTIVE_RESP, do_nothing }, | 
 | 	{ CAPI_CONNECT_B3_REQ, do_connect_b3_req }, | 
 | 	{ CAPI_CONNECT_B3_RESP, do_connect_b3_resp }, | 
 | 	{ CAPI_CONNECT_B3_T90_ACTIVE_RESP, do_nothing }, | 
 | 	{ CAPI_CONNECT_REQ, do_connect_req }, | 
 | 	{ CAPI_CONNECT_RESP, do_connect_resp }, | 
 | 	{ CAPI_DISCONNECT_B3_REQ, do_disconnect_b3_req }, | 
 | 	{ CAPI_DISCONNECT_B3_RESP, do_nothing }, | 
 | 	{ CAPI_DISCONNECT_REQ, do_disconnect_req }, | 
 | 	{ CAPI_DISCONNECT_RESP, do_nothing }, | 
 | 	{ CAPI_FACILITY_REQ, do_facility_req }, | 
 | 	{ CAPI_FACILITY_RESP, do_nothing }, | 
 | 	{ CAPI_LISTEN_REQ, do_listen_req }, | 
 | 	{ CAPI_SELECT_B_PROTOCOL_REQ, do_unsupported }, | 
 | 	{ CAPI_RESET_B3_REQ, do_reset_b3_req }, | 
 | 	{ CAPI_RESET_B3_RESP, do_nothing }, | 
 |  | 
 | 	/* | 
 | 	 * ToDo: support overlap sending (requires ev-layer state | 
 | 	 * machine extension to generate additional ATD commands) | 
 | 	 */ | 
 | 	{ CAPI_INFO_REQ, do_unsupported }, | 
 | 	{ CAPI_INFO_RESP, do_nothing }, | 
 |  | 
 | 	/* | 
 | 	 * ToDo: what's the proper response for these? | 
 | 	 */ | 
 | 	{ CAPI_MANUFACTURER_REQ, do_nothing }, | 
 | 	{ CAPI_MANUFACTURER_RESP, do_nothing }, | 
 | }; | 
 |  | 
 | /* look up handler */ | 
 | static inline capi_send_handler_t lookup_capi_send_handler(const u16 cmd) | 
 | { | 
 | 	size_t i; | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(capi_send_handler_table); i++) | 
 | 		if (capi_send_handler_table[i].cmd == cmd) | 
 | 			return capi_send_handler_table[i].handler; | 
 | 	return NULL; | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * gigaset_send_message() - accept a CAPI message from an application | 
 |  * @ctr:	controller descriptor structure. | 
 |  * @skb:	CAPI message. | 
 |  * | 
 |  * Return value: CAPI error code | 
 |  * Note: capidrv (and probably others, too) only uses the return value to | 
 |  * decide whether it has to free the skb (only if result != CAPI_NOERROR (0)) | 
 |  */ | 
 | static u16 gigaset_send_message(struct capi_ctr *ctr, struct sk_buff *skb) | 
 | { | 
 | 	struct gigaset_capi_ctr *iif | 
 | 		= container_of(ctr, struct gigaset_capi_ctr, ctr); | 
 | 	struct cardstate *cs = ctr->driverdata; | 
 | 	struct gigaset_capi_appl *ap; | 
 | 	capi_send_handler_t handler; | 
 |  | 
 | 	/* can only handle linear sk_buffs */ | 
 | 	if (skb_linearize(skb) < 0) { | 
 | 		dev_warn(cs->dev, "%s: skb_linearize failed\n", __func__); | 
 | 		return CAPI_MSGOSRESOURCEERR; | 
 | 	} | 
 |  | 
 | 	/* retrieve application data structure */ | 
 | 	ap = get_appl(iif, CAPIMSG_APPID(skb->data)); | 
 | 	if (!ap) { | 
 | 		dev_notice(cs->dev, "%s: application %u not registered\n", | 
 | 			   __func__, CAPIMSG_APPID(skb->data)); | 
 | 		return CAPI_ILLAPPNR; | 
 | 	} | 
 |  | 
 | 	/* look up command */ | 
 | 	handler = lookup_capi_send_handler(CAPIMSG_CMD(skb->data)); | 
 | 	if (!handler) { | 
 | 		/* unknown/unsupported message type */ | 
 | 		if (printk_ratelimit()) | 
 | 			dev_notice(cs->dev, "%s: unsupported message %u\n", | 
 | 				   __func__, CAPIMSG_CMD(skb->data)); | 
 | 		return CAPI_ILLCMDORSUBCMDORMSGTOSMALL; | 
 | 	} | 
 |  | 
 | 	/* serialize */ | 
 | 	if (atomic_add_return(1, &iif->sendqlen) > 1) { | 
 | 		/* queue behind other messages */ | 
 | 		skb_queue_tail(&iif->sendqueue, skb); | 
 | 		return CAPI_NOERROR; | 
 | 	} | 
 |  | 
 | 	/* process message */ | 
 | 	handler(iif, ap, skb); | 
 |  | 
 | 	/* process other messages arrived in the meantime */ | 
 | 	while (atomic_sub_return(1, &iif->sendqlen) > 0) { | 
 | 		skb = skb_dequeue(&iif->sendqueue); | 
 | 		if (!skb) { | 
 | 			/* should never happen */ | 
 | 			dev_err(cs->dev, "%s: send queue empty\n", __func__); | 
 | 			continue; | 
 | 		} | 
 | 		ap = get_appl(iif, CAPIMSG_APPID(skb->data)); | 
 | 		if (!ap) { | 
 | 			/* could that happen? */ | 
 | 			dev_warn(cs->dev, "%s: application %u vanished\n", | 
 | 				 __func__, CAPIMSG_APPID(skb->data)); | 
 | 			continue; | 
 | 		} | 
 | 		handler = lookup_capi_send_handler(CAPIMSG_CMD(skb->data)); | 
 | 		if (!handler) { | 
 | 			/* should never happen */ | 
 | 			dev_err(cs->dev, "%s: handler %x vanished\n", | 
 | 				__func__, CAPIMSG_CMD(skb->data)); | 
 | 			continue; | 
 | 		} | 
 | 		handler(iif, ap, skb); | 
 | 	} | 
 |  | 
 | 	return CAPI_NOERROR; | 
 | } | 
 |  | 
 | /** | 
 |  * gigaset_procinfo() - build single line description for controller | 
 |  * @ctr:	controller descriptor structure. | 
 |  * | 
 |  * Return value: pointer to generated string (null terminated) | 
 |  */ | 
 | static char *gigaset_procinfo(struct capi_ctr *ctr) | 
 | { | 
 | 	return ctr->name;	/* ToDo: more? */ | 
 | } | 
 |  | 
 | static int gigaset_proc_show(struct seq_file *m, void *v) | 
 | { | 
 | 	struct capi_ctr *ctr = m->private; | 
 | 	struct cardstate *cs = ctr->driverdata; | 
 | 	char *s; | 
 | 	int i; | 
 |  | 
 | 	seq_printf(m, "%-16s %s\n", "name", ctr->name); | 
 | 	seq_printf(m, "%-16s %s %s\n", "dev", | 
 | 		   dev_driver_string(cs->dev), dev_name(cs->dev)); | 
 | 	seq_printf(m, "%-16s %d\n", "id", cs->myid); | 
 | 	if (cs->gotfwver) | 
 | 		seq_printf(m, "%-16s %d.%d.%d.%d\n", "firmware", | 
 | 			   cs->fwver[0], cs->fwver[1], cs->fwver[2], cs->fwver[3]); | 
 | 	seq_printf(m, "%-16s %d\n", "channels", cs->channels); | 
 | 	seq_printf(m, "%-16s %s\n", "onechannel", cs->onechannel ? "yes" : "no"); | 
 |  | 
 | 	switch (cs->mode) { | 
 | 	case M_UNKNOWN: | 
 | 		s = "unknown"; | 
 | 		break; | 
 | 	case M_CONFIG: | 
 | 		s = "config"; | 
 | 		break; | 
 | 	case M_UNIMODEM: | 
 | 		s = "Unimodem"; | 
 | 		break; | 
 | 	case M_CID: | 
 | 		s = "CID"; | 
 | 		break; | 
 | 	default: | 
 | 		s = "??"; | 
 | 	} | 
 | 	seq_printf(m, "%-16s %s\n", "mode", s); | 
 |  | 
 | 	switch (cs->mstate) { | 
 | 	case MS_UNINITIALIZED: | 
 | 		s = "uninitialized"; | 
 | 		break; | 
 | 	case MS_INIT: | 
 | 		s = "init"; | 
 | 		break; | 
 | 	case MS_LOCKED: | 
 | 		s = "locked"; | 
 | 		break; | 
 | 	case MS_SHUTDOWN: | 
 | 		s = "shutdown"; | 
 | 		break; | 
 | 	case MS_RECOVER: | 
 | 		s = "recover"; | 
 | 		break; | 
 | 	case MS_READY: | 
 | 		s = "ready"; | 
 | 		break; | 
 | 	default: | 
 | 		s = "??"; | 
 | 	} | 
 | 	seq_printf(m, "%-16s %s\n", "mstate", s); | 
 |  | 
 | 	seq_printf(m, "%-16s %s\n", "running", cs->running ? "yes" : "no"); | 
 | 	seq_printf(m, "%-16s %s\n", "connected", cs->connected ? "yes" : "no"); | 
 | 	seq_printf(m, "%-16s %s\n", "isdn_up", cs->isdn_up ? "yes" : "no"); | 
 | 	seq_printf(m, "%-16s %s\n", "cidmode", cs->cidmode ? "yes" : "no"); | 
 |  | 
 | 	for (i = 0; i < cs->channels; i++) { | 
 | 		seq_printf(m, "[%d]%-13s %d\n", i, "corrupted", | 
 | 			   cs->bcs[i].corrupted); | 
 | 		seq_printf(m, "[%d]%-13s %d\n", i, "trans_down", | 
 | 			   cs->bcs[i].trans_down); | 
 | 		seq_printf(m, "[%d]%-13s %d\n", i, "trans_up", | 
 | 			   cs->bcs[i].trans_up); | 
 | 		seq_printf(m, "[%d]%-13s %d\n", i, "chstate", | 
 | 			   cs->bcs[i].chstate); | 
 | 		switch (cs->bcs[i].proto2) { | 
 | 		case L2_BITSYNC: | 
 | 			s = "bitsync"; | 
 | 			break; | 
 | 		case L2_HDLC: | 
 | 			s = "HDLC"; | 
 | 			break; | 
 | 		case L2_VOICE: | 
 | 			s = "voice"; | 
 | 			break; | 
 | 		default: | 
 | 			s = "??"; | 
 | 		} | 
 | 		seq_printf(m, "[%d]%-13s %s\n", i, "proto2", s); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int gigaset_proc_open(struct inode *inode, struct file *file) | 
 | { | 
 | 	return single_open(file, gigaset_proc_show, PDE(inode)->data); | 
 | } | 
 |  | 
 | static const struct file_operations gigaset_proc_fops = { | 
 | 	.owner		= THIS_MODULE, | 
 | 	.open		= gigaset_proc_open, | 
 | 	.read		= seq_read, | 
 | 	.llseek		= seq_lseek, | 
 | 	.release	= single_release, | 
 | }; | 
 |  | 
 | /** | 
 |  * gigaset_isdn_regdev() - register device to LL | 
 |  * @cs:		device descriptor structure. | 
 |  * @isdnid:	device name. | 
 |  * | 
 |  * Return value: 0 on success, error code < 0 on failure | 
 |  */ | 
 | int gigaset_isdn_regdev(struct cardstate *cs, const char *isdnid) | 
 | { | 
 | 	struct gigaset_capi_ctr *iif; | 
 | 	int rc; | 
 |  | 
 | 	iif = kmalloc(sizeof(*iif), GFP_KERNEL); | 
 | 	if (!iif) { | 
 | 		pr_err("%s: out of memory\n", __func__); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	/* prepare controller structure */ | 
 | 	iif->ctr.owner         = THIS_MODULE; | 
 | 	iif->ctr.driverdata    = cs; | 
 | 	strncpy(iif->ctr.name, isdnid, sizeof(iif->ctr.name)); | 
 | 	iif->ctr.driver_name   = "gigaset"; | 
 | 	iif->ctr.load_firmware = NULL; | 
 | 	iif->ctr.reset_ctr     = NULL; | 
 | 	iif->ctr.register_appl = gigaset_register_appl; | 
 | 	iif->ctr.release_appl  = gigaset_release_appl; | 
 | 	iif->ctr.send_message  = gigaset_send_message; | 
 | 	iif->ctr.procinfo      = gigaset_procinfo; | 
 | 	iif->ctr.proc_fops = &gigaset_proc_fops; | 
 | 	INIT_LIST_HEAD(&iif->appls); | 
 | 	skb_queue_head_init(&iif->sendqueue); | 
 | 	atomic_set(&iif->sendqlen, 0); | 
 |  | 
 | 	/* register controller with CAPI */ | 
 | 	rc = attach_capi_ctr(&iif->ctr); | 
 | 	if (rc) { | 
 | 		pr_err("attach_capi_ctr failed (%d)\n", rc); | 
 | 		kfree(iif); | 
 | 		return rc; | 
 | 	} | 
 |  | 
 | 	cs->iif = iif; | 
 | 	cs->hw_hdr_len = CAPI_DATA_B3_REQ_LEN; | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * gigaset_isdn_unregdev() - unregister device from LL | 
 |  * @cs:		device descriptor structure. | 
 |  */ | 
 | void gigaset_isdn_unregdev(struct cardstate *cs) | 
 | { | 
 | 	struct gigaset_capi_ctr *iif = cs->iif; | 
 |  | 
 | 	detach_capi_ctr(&iif->ctr); | 
 | 	kfree(iif); | 
 | 	cs->iif = NULL; | 
 | } | 
 |  | 
 | static struct capi_driver capi_driver_gigaset = { | 
 | 	.name		= "gigaset", | 
 | 	.revision	= "1.0", | 
 | }; | 
 |  | 
 | /** | 
 |  * gigaset_isdn_regdrv() - register driver to LL | 
 |  */ | 
 | void gigaset_isdn_regdrv(void) | 
 | { | 
 | 	pr_info("Kernel CAPI interface\n"); | 
 | 	register_capi_driver(&capi_driver_gigaset); | 
 | } | 
 |  | 
 | /** | 
 |  * gigaset_isdn_unregdrv() - unregister driver from LL | 
 |  */ | 
 | void gigaset_isdn_unregdrv(void) | 
 | { | 
 | 	unregister_capi_driver(&capi_driver_gigaset); | 
 | } |