| /* | 
 |  * SAMSUNG EXYNOS USB HOST OHCI Controller | 
 |  * | 
 |  * Copyright (C) 2011 Samsung Electronics Co.Ltd | 
 |  * Author: Jingoo Han <jg1.han@samsung.com> | 
 |  * | 
 |  * This program is free software; you can redistribute  it and/or modify it | 
 |  * under  the terms of  the GNU General  Public License as published by the | 
 |  * Free Software Foundation;  either version 2 of the  License, or (at your | 
 |  * option) any later version. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/clk.h> | 
 | #include <linux/of.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/platform_data/usb-exynos.h> | 
 | #include <linux/usb/phy.h> | 
 | #include <linux/usb/samsung_usb_phy.h> | 
 | #include <plat/usb-phy.h> | 
 |  | 
 | struct exynos_ohci_hcd { | 
 | 	struct device *dev; | 
 | 	struct usb_hcd *hcd; | 
 | 	struct clk *clk; | 
 | 	struct usb_phy *phy; | 
 | 	struct usb_otg *otg; | 
 | 	struct exynos4_ohci_platdata *pdata; | 
 | }; | 
 |  | 
 | static void exynos_ohci_phy_enable(struct exynos_ohci_hcd *exynos_ohci) | 
 | { | 
 | 	struct platform_device *pdev = to_platform_device(exynos_ohci->dev); | 
 |  | 
 | 	if (exynos_ohci->phy) | 
 | 		usb_phy_init(exynos_ohci->phy); | 
 | 	else if (exynos_ohci->pdata->phy_init) | 
 | 		exynos_ohci->pdata->phy_init(pdev, USB_PHY_TYPE_HOST); | 
 | } | 
 |  | 
 | static void exynos_ohci_phy_disable(struct exynos_ohci_hcd *exynos_ohci) | 
 | { | 
 | 	struct platform_device *pdev = to_platform_device(exynos_ohci->dev); | 
 |  | 
 | 	if (exynos_ohci->phy) | 
 | 		usb_phy_shutdown(exynos_ohci->phy); | 
 | 	else if (exynos_ohci->pdata->phy_exit) | 
 | 		exynos_ohci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST); | 
 | } | 
 |  | 
 | static int ohci_exynos_reset(struct usb_hcd *hcd) | 
 | { | 
 | 	return ohci_init(hcd_to_ohci(hcd)); | 
 | } | 
 |  | 
 | static int ohci_exynos_start(struct usb_hcd *hcd) | 
 | { | 
 | 	struct ohci_hcd *ohci = hcd_to_ohci(hcd); | 
 | 	int ret; | 
 |  | 
 | 	ohci_dbg(ohci, "ohci_exynos_start, ohci:%p", ohci); | 
 |  | 
 | 	ret = ohci_run(ohci); | 
 | 	if (ret < 0) { | 
 | 		dev_err(hcd->self.controller, "can't start %s\n", | 
 | 			hcd->self.bus_name); | 
 | 		ohci_stop(hcd); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct hc_driver exynos_ohci_hc_driver = { | 
 | 	.description		= hcd_name, | 
 | 	.product_desc		= "EXYNOS OHCI Host Controller", | 
 | 	.hcd_priv_size		= sizeof(struct ohci_hcd), | 
 |  | 
 | 	.irq			= ohci_irq, | 
 | 	.flags			= HCD_MEMORY|HCD_USB11, | 
 |  | 
 | 	.reset			= ohci_exynos_reset, | 
 | 	.start			= ohci_exynos_start, | 
 | 	.stop			= ohci_stop, | 
 | 	.shutdown		= ohci_shutdown, | 
 |  | 
 | 	.get_frame_number	= ohci_get_frame, | 
 |  | 
 | 	.urb_enqueue		= ohci_urb_enqueue, | 
 | 	.urb_dequeue		= ohci_urb_dequeue, | 
 | 	.endpoint_disable	= ohci_endpoint_disable, | 
 |  | 
 | 	.hub_status_data	= ohci_hub_status_data, | 
 | 	.hub_control		= ohci_hub_control, | 
 | #ifdef	CONFIG_PM | 
 | 	.bus_suspend		= ohci_bus_suspend, | 
 | 	.bus_resume		= ohci_bus_resume, | 
 | #endif | 
 | 	.start_port_reset	= ohci_start_port_reset, | 
 | }; | 
 |  | 
 | static u64 ohci_exynos_dma_mask = DMA_BIT_MASK(32); | 
 |  | 
 | static int exynos_ohci_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data; | 
 | 	struct exynos_ohci_hcd *exynos_ohci; | 
 | 	struct usb_hcd *hcd; | 
 | 	struct ohci_hcd *ohci; | 
 | 	struct resource *res; | 
 | 	struct usb_phy *phy; | 
 | 	int irq; | 
 | 	int err; | 
 |  | 
 | 	/* | 
 | 	 * Right now device-tree probed devices don't get dma_mask set. | 
 | 	 * Since shared usb code relies on it, set it here for now. | 
 | 	 * Once we move to full device tree support this will vanish off. | 
 | 	 */ | 
 | 	if (!pdev->dev.dma_mask) | 
 | 		pdev->dev.dma_mask = &ohci_exynos_dma_mask; | 
 | 	if (!pdev->dev.coherent_dma_mask) | 
 | 		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); | 
 |  | 
 | 	exynos_ohci = devm_kzalloc(&pdev->dev, sizeof(struct exynos_ohci_hcd), | 
 | 					GFP_KERNEL); | 
 | 	if (!exynos_ohci) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); | 
 | 	if (IS_ERR_OR_NULL(phy)) { | 
 | 		/* Fallback to pdata */ | 
 | 		if (!pdata) { | 
 | 			dev_warn(&pdev->dev, "no platform data or transceiver defined\n"); | 
 | 			return -EPROBE_DEFER; | 
 | 		} else { | 
 | 			exynos_ohci->pdata = pdata; | 
 | 		} | 
 | 	} else { | 
 | 		exynos_ohci->phy = phy; | 
 | 		exynos_ohci->otg = phy->otg; | 
 | 	} | 
 |  | 
 | 	exynos_ohci->dev = &pdev->dev; | 
 |  | 
 | 	hcd = usb_create_hcd(&exynos_ohci_hc_driver, &pdev->dev, | 
 | 					dev_name(&pdev->dev)); | 
 | 	if (!hcd) { | 
 | 		dev_err(&pdev->dev, "Unable to create HCD\n"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	exynos_ohci->hcd = hcd; | 
 | 	exynos_ohci->clk = devm_clk_get(&pdev->dev, "usbhost"); | 
 |  | 
 | 	if (IS_ERR(exynos_ohci->clk)) { | 
 | 		dev_err(&pdev->dev, "Failed to get usbhost clock\n"); | 
 | 		err = PTR_ERR(exynos_ohci->clk); | 
 | 		goto fail_clk; | 
 | 	} | 
 |  | 
 | 	err = clk_prepare_enable(exynos_ohci->clk); | 
 | 	if (err) | 
 | 		goto fail_clk; | 
 |  | 
 | 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 	if (!res) { | 
 | 		dev_err(&pdev->dev, "Failed to get I/O memory\n"); | 
 | 		err = -ENXIO; | 
 | 		goto fail_io; | 
 | 	} | 
 |  | 
 | 	hcd->rsrc_start = res->start; | 
 | 	hcd->rsrc_len = resource_size(res); | 
 | 	hcd->regs = devm_ioremap(&pdev->dev, res->start, hcd->rsrc_len); | 
 | 	if (!hcd->regs) { | 
 | 		dev_err(&pdev->dev, "Failed to remap I/O memory\n"); | 
 | 		err = -ENOMEM; | 
 | 		goto fail_io; | 
 | 	} | 
 |  | 
 | 	irq = platform_get_irq(pdev, 0); | 
 | 	if (!irq) { | 
 | 		dev_err(&pdev->dev, "Failed to get IRQ\n"); | 
 | 		err = -ENODEV; | 
 | 		goto fail_io; | 
 | 	} | 
 |  | 
 | 	if (exynos_ohci->otg) | 
 | 		exynos_ohci->otg->set_host(exynos_ohci->otg, | 
 | 					&exynos_ohci->hcd->self); | 
 |  | 
 | 	exynos_ohci_phy_enable(exynos_ohci); | 
 |  | 
 | 	ohci = hcd_to_ohci(hcd); | 
 | 	ohci_hcd_init(ohci); | 
 |  | 
 | 	err = usb_add_hcd(hcd, irq, IRQF_SHARED); | 
 | 	if (err) { | 
 | 		dev_err(&pdev->dev, "Failed to add USB HCD\n"); | 
 | 		goto fail_add_hcd; | 
 | 	} | 
 |  | 
 | 	platform_set_drvdata(pdev, exynos_ohci); | 
 |  | 
 | 	return 0; | 
 |  | 
 | fail_add_hcd: | 
 | 	exynos_ohci_phy_disable(exynos_ohci); | 
 | fail_io: | 
 | 	clk_disable_unprepare(exynos_ohci->clk); | 
 | fail_clk: | 
 | 	usb_put_hcd(hcd); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int exynos_ohci_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct exynos_ohci_hcd *exynos_ohci = platform_get_drvdata(pdev); | 
 | 	struct usb_hcd *hcd = exynos_ohci->hcd; | 
 |  | 
 | 	usb_remove_hcd(hcd); | 
 |  | 
 | 	if (exynos_ohci->otg) | 
 | 		exynos_ohci->otg->set_host(exynos_ohci->otg, | 
 | 					&exynos_ohci->hcd->self); | 
 |  | 
 | 	exynos_ohci_phy_disable(exynos_ohci); | 
 |  | 
 | 	clk_disable_unprepare(exynos_ohci->clk); | 
 |  | 
 | 	usb_put_hcd(hcd); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void exynos_ohci_shutdown(struct platform_device *pdev) | 
 | { | 
 | 	struct exynos_ohci_hcd *exynos_ohci = platform_get_drvdata(pdev); | 
 | 	struct usb_hcd *hcd = exynos_ohci->hcd; | 
 |  | 
 | 	if (hcd->driver->shutdown) | 
 | 		hcd->driver->shutdown(hcd); | 
 | } | 
 |  | 
 | #ifdef CONFIG_PM | 
 | static int exynos_ohci_suspend(struct device *dev) | 
 | { | 
 | 	struct exynos_ohci_hcd *exynos_ohci = dev_get_drvdata(dev); | 
 | 	struct usb_hcd *hcd = exynos_ohci->hcd; | 
 | 	struct ohci_hcd *ohci = hcd_to_ohci(hcd); | 
 | 	unsigned long flags; | 
 | 	int rc = 0; | 
 |  | 
 | 	/* | 
 | 	 * Root hub was already suspended. Disable irq emission and | 
 | 	 * mark HW unaccessible, bail out if RH has been resumed. Use | 
 | 	 * the spinlock to properly synchronize with possible pending | 
 | 	 * RH suspend or resume activity. | 
 | 	 */ | 
 | 	spin_lock_irqsave(&ohci->lock, flags); | 
 | 	if (ohci->rh_state != OHCI_RH_SUSPENDED && | 
 | 			ohci->rh_state != OHCI_RH_HALTED) { | 
 | 		rc = -EINVAL; | 
 | 		goto fail; | 
 | 	} | 
 |  | 
 | 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); | 
 |  | 
 | 	if (exynos_ohci->otg) | 
 | 		exynos_ohci->otg->set_host(exynos_ohci->otg, | 
 | 					&exynos_ohci->hcd->self); | 
 |  | 
 | 	exynos_ohci_phy_disable(exynos_ohci); | 
 |  | 
 | 	clk_disable_unprepare(exynos_ohci->clk); | 
 |  | 
 | fail: | 
 | 	spin_unlock_irqrestore(&ohci->lock, flags); | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 | static int exynos_ohci_resume(struct device *dev) | 
 | { | 
 | 	struct exynos_ohci_hcd *exynos_ohci = dev_get_drvdata(dev); | 
 | 	struct usb_hcd *hcd = exynos_ohci->hcd; | 
 |  | 
 | 	clk_prepare_enable(exynos_ohci->clk); | 
 |  | 
 | 	if (exynos_ohci->otg) | 
 | 		exynos_ohci->otg->set_host(exynos_ohci->otg, | 
 | 					&exynos_ohci->hcd->self); | 
 |  | 
 | 	exynos_ohci_phy_enable(exynos_ohci); | 
 |  | 
 | 	ohci_resume(hcd, false); | 
 |  | 
 | 	return 0; | 
 | } | 
 | #else | 
 | #define exynos_ohci_suspend	NULL | 
 | #define exynos_ohci_resume	NULL | 
 | #endif | 
 |  | 
 | static const struct dev_pm_ops exynos_ohci_pm_ops = { | 
 | 	.suspend	= exynos_ohci_suspend, | 
 | 	.resume		= exynos_ohci_resume, | 
 | }; | 
 |  | 
 | #ifdef CONFIG_OF | 
 | static const struct of_device_id exynos_ohci_match[] = { | 
 | 	{ .compatible = "samsung,exynos4210-ohci" }, | 
 | 	{}, | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, exynos_ohci_match); | 
 | #endif | 
 |  | 
 | static struct platform_driver exynos_ohci_driver = { | 
 | 	.probe		= exynos_ohci_probe, | 
 | 	.remove		= exynos_ohci_remove, | 
 | 	.shutdown	= exynos_ohci_shutdown, | 
 | 	.driver = { | 
 | 		.name	= "exynos-ohci", | 
 | 		.owner	= THIS_MODULE, | 
 | 		.pm	= &exynos_ohci_pm_ops, | 
 | 		.of_match_table	= of_match_ptr(exynos_ohci_match), | 
 | 	} | 
 | }; | 
 |  | 
 | MODULE_ALIAS("platform:exynos-ohci"); | 
 | MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>"); |