| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * storage_common.c -- Common definitions for mass storage functionality |
| * |
| * Copyright (C) 2003-2008 Alan Stern |
| * Copyeight (C) 2009 Samsung Electronics |
| * Author: Michal Nazarewicz (mina86@mina86.com) |
| */ |
| |
| /* |
| * This file requires the following identifiers used in USB strings to |
| * be defined (each of type pointer to char): |
| * - fsg_string_interface -- name of the interface |
| */ |
| |
| /* |
| * When USB_GADGET_DEBUG_FILES is defined the module param num_buffers |
| * sets the number of pipeline buffers (length of the fsg_buffhd array). |
| * The valid range of num_buffers is: num >= 2 && num <= 4. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/blkdev.h> |
| #include <linux/file.h> |
| #include <linux/fs.h> |
| #include <linux/kstrtox.h> |
| #include <linux/usb/composite.h> |
| |
| #include "storage_common.h" |
| |
| /* There is only one interface. */ |
| |
| struct usb_interface_descriptor fsg_intf_desc = { |
| .bLength = sizeof fsg_intf_desc, |
| .bDescriptorType = USB_DT_INTERFACE, |
| |
| .bNumEndpoints = 2, /* Adjusted during fsg_bind() */ |
| .bInterfaceClass = USB_CLASS_MASS_STORAGE, |
| .bInterfaceSubClass = USB_SC_SCSI, /* Adjusted during fsg_bind() */ |
| .bInterfaceProtocol = USB_PR_BULK, /* Adjusted during fsg_bind() */ |
| .iInterface = FSG_STRING_INTERFACE, |
| }; |
| EXPORT_SYMBOL_GPL(fsg_intf_desc); |
| |
| /* |
| * Three full-speed endpoint descriptors: bulk-in, bulk-out, and |
| * interrupt-in. |
| */ |
| |
| struct usb_endpoint_descriptor fsg_fs_bulk_in_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| /* wMaxPacketSize set by autoconfiguration */ |
| }; |
| EXPORT_SYMBOL_GPL(fsg_fs_bulk_in_desc); |
| |
| struct usb_endpoint_descriptor fsg_fs_bulk_out_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| /* wMaxPacketSize set by autoconfiguration */ |
| }; |
| EXPORT_SYMBOL_GPL(fsg_fs_bulk_out_desc); |
| |
| struct usb_descriptor_header *fsg_fs_function[] = { |
| (struct usb_descriptor_header *) &fsg_intf_desc, |
| (struct usb_descriptor_header *) &fsg_fs_bulk_in_desc, |
| (struct usb_descriptor_header *) &fsg_fs_bulk_out_desc, |
| NULL, |
| }; |
| EXPORT_SYMBOL_GPL(fsg_fs_function); |
| |
| |
| /* |
| * USB 2.0 devices need to expose both high speed and full speed |
| * descriptors, unless they only run at full speed. |
| * |
| * That means alternate endpoint descriptors (bigger packets). |
| */ |
| struct usb_endpoint_descriptor fsg_hs_bulk_in_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| /* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */ |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(512), |
| }; |
| EXPORT_SYMBOL_GPL(fsg_hs_bulk_in_desc); |
| |
| struct usb_endpoint_descriptor fsg_hs_bulk_out_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| /* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */ |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(512), |
| .bInterval = 1, /* NAK every 1 uframe */ |
| }; |
| EXPORT_SYMBOL_GPL(fsg_hs_bulk_out_desc); |
| |
| |
| struct usb_descriptor_header *fsg_hs_function[] = { |
| (struct usb_descriptor_header *) &fsg_intf_desc, |
| (struct usb_descriptor_header *) &fsg_hs_bulk_in_desc, |
| (struct usb_descriptor_header *) &fsg_hs_bulk_out_desc, |
| NULL, |
| }; |
| EXPORT_SYMBOL_GPL(fsg_hs_function); |
| |
| struct usb_endpoint_descriptor fsg_ss_bulk_in_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| /* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */ |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(1024), |
| }; |
| EXPORT_SYMBOL_GPL(fsg_ss_bulk_in_desc); |
| |
| struct usb_ss_ep_comp_descriptor fsg_ss_bulk_in_comp_desc = { |
| .bLength = sizeof(fsg_ss_bulk_in_comp_desc), |
| .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, |
| |
| /*.bMaxBurst = DYNAMIC, */ |
| }; |
| EXPORT_SYMBOL_GPL(fsg_ss_bulk_in_comp_desc); |
| |
| struct usb_endpoint_descriptor fsg_ss_bulk_out_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| /* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */ |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(1024), |
| }; |
| EXPORT_SYMBOL_GPL(fsg_ss_bulk_out_desc); |
| |
| struct usb_ss_ep_comp_descriptor fsg_ss_bulk_out_comp_desc = { |
| .bLength = sizeof(fsg_ss_bulk_in_comp_desc), |
| .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, |
| |
| /*.bMaxBurst = DYNAMIC, */ |
| }; |
| EXPORT_SYMBOL_GPL(fsg_ss_bulk_out_comp_desc); |
| |
| struct usb_descriptor_header *fsg_ss_function[] = { |
| (struct usb_descriptor_header *) &fsg_intf_desc, |
| (struct usb_descriptor_header *) &fsg_ss_bulk_in_desc, |
| (struct usb_descriptor_header *) &fsg_ss_bulk_in_comp_desc, |
| (struct usb_descriptor_header *) &fsg_ss_bulk_out_desc, |
| (struct usb_descriptor_header *) &fsg_ss_bulk_out_comp_desc, |
| NULL, |
| }; |
| EXPORT_SYMBOL_GPL(fsg_ss_function); |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* |
| * If the next two routines are called while the gadget is registered, |
| * the caller must own fsg->filesem for writing. |
| */ |
| |
| void fsg_lun_close(struct fsg_lun *curlun) |
| { |
| if (curlun->filp) { |
| LDBG(curlun, "close backing file\n"); |
| fput(curlun->filp); |
| curlun->filp = NULL; |
| } |
| } |
| EXPORT_SYMBOL_GPL(fsg_lun_close); |
| |
| int fsg_lun_open(struct fsg_lun *curlun, const char *filename) |
| { |
| int ro; |
| struct file *filp = NULL; |
| int rc = -EINVAL; |
| struct inode *inode = NULL; |
| loff_t size; |
| loff_t num_sectors; |
| loff_t min_sectors; |
| unsigned int blkbits; |
| unsigned int blksize; |
| |
| /* R/W if we can, R/O if we must */ |
| ro = curlun->initially_ro; |
| if (!ro) { |
| filp = filp_open(filename, O_RDWR | O_LARGEFILE, 0); |
| if (PTR_ERR(filp) == -EROFS || PTR_ERR(filp) == -EACCES) |
| ro = 1; |
| } |
| if (ro) |
| filp = filp_open(filename, O_RDONLY | O_LARGEFILE, 0); |
| if (IS_ERR(filp)) { |
| LINFO(curlun, "unable to open backing file: %s\n", filename); |
| return PTR_ERR(filp); |
| } |
| |
| if (!(filp->f_mode & FMODE_WRITE)) |
| ro = 1; |
| |
| inode = filp->f_mapping->host; |
| if ((!S_ISREG(inode->i_mode) && !S_ISBLK(inode->i_mode))) { |
| LINFO(curlun, "invalid file type: %s\n", filename); |
| goto out; |
| } |
| |
| /* |
| * If we can't read the file, it's no good. |
| * If we can't write the file, use it read-only. |
| */ |
| if (!(filp->f_mode & FMODE_CAN_READ)) { |
| LINFO(curlun, "file not readable: %s\n", filename); |
| goto out; |
| } |
| if (!(filp->f_mode & FMODE_CAN_WRITE)) |
| ro = 1; |
| |
| size = i_size_read(inode); |
| if (size < 0) { |
| LINFO(curlun, "unable to find file size: %s\n", filename); |
| rc = (int) size; |
| goto out; |
| } |
| |
| if (curlun->cdrom) { |
| blksize = 2048; |
| blkbits = 11; |
| } else if (S_ISBLK(inode->i_mode)) { |
| blksize = bdev_logical_block_size(I_BDEV(inode)); |
| blkbits = blksize_bits(blksize); |
| } else { |
| blksize = 512; |
| blkbits = 9; |
| } |
| |
| num_sectors = size >> blkbits; /* File size in logic-block-size blocks */ |
| min_sectors = 1; |
| if (curlun->cdrom) { |
| min_sectors = 300; /* Smallest track is 300 frames */ |
| if (num_sectors >= 256*60*75) { |
| num_sectors = 256*60*75 - 1; |
| LINFO(curlun, "file too big: %s\n", filename); |
| LINFO(curlun, "using only first %d blocks\n", |
| (int) num_sectors); |
| } |
| } |
| if (num_sectors < min_sectors) { |
| LINFO(curlun, "file too small: %s\n", filename); |
| rc = -ETOOSMALL; |
| goto out; |
| } |
| |
| if (fsg_lun_is_open(curlun)) |
| fsg_lun_close(curlun); |
| |
| curlun->blksize = blksize; |
| curlun->blkbits = blkbits; |
| curlun->ro = ro; |
| curlun->filp = filp; |
| curlun->file_length = size; |
| curlun->num_sectors = num_sectors; |
| LDBG(curlun, "open backing file: %s\n", filename); |
| return 0; |
| |
| out: |
| fput(filp); |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(fsg_lun_open); |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* |
| * Sync the file data, don't bother with the metadata. |
| * This code was copied from fs/buffer.c:sys_fdatasync(). |
| */ |
| int fsg_lun_fsync_sub(struct fsg_lun *curlun) |
| { |
| struct file *filp = curlun->filp; |
| |
| if (curlun->ro || !filp) |
| return 0; |
| return vfs_fsync(filp, 1); |
| } |
| EXPORT_SYMBOL_GPL(fsg_lun_fsync_sub); |
| |
| void store_cdrom_address(u8 *dest, int msf, u32 addr) |
| { |
| if (msf) { |
| /* |
| * Convert to Minutes-Seconds-Frames. |
| * Sector size is already set to 2048 bytes. |
| */ |
| addr += 2*75; /* Lead-in occupies 2 seconds */ |
| dest[3] = addr % 75; /* Frames */ |
| addr /= 75; |
| dest[2] = addr % 60; /* Seconds */ |
| addr /= 60; |
| dest[1] = addr; /* Minutes */ |
| dest[0] = 0; /* Reserved */ |
| } else { |
| /* Absolute sector */ |
| put_unaligned_be32(addr, dest); |
| } |
| } |
| EXPORT_SYMBOL_GPL(store_cdrom_address); |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| |
| ssize_t fsg_show_ro(struct fsg_lun *curlun, char *buf) |
| { |
| return sprintf(buf, "%d\n", fsg_lun_is_open(curlun) |
| ? curlun->ro |
| : curlun->initially_ro); |
| } |
| EXPORT_SYMBOL_GPL(fsg_show_ro); |
| |
| ssize_t fsg_show_nofua(struct fsg_lun *curlun, char *buf) |
| { |
| return sprintf(buf, "%u\n", curlun->nofua); |
| } |
| EXPORT_SYMBOL_GPL(fsg_show_nofua); |
| |
| ssize_t fsg_show_file(struct fsg_lun *curlun, struct rw_semaphore *filesem, |
| char *buf) |
| { |
| char *p; |
| ssize_t rc; |
| |
| down_read(filesem); |
| if (fsg_lun_is_open(curlun)) { /* Get the complete pathname */ |
| p = file_path(curlun->filp, buf, PAGE_SIZE - 1); |
| if (IS_ERR(p)) |
| rc = PTR_ERR(p); |
| else { |
| rc = strlen(p); |
| memmove(buf, p, rc); |
| buf[rc] = '\n'; /* Add a newline */ |
| buf[++rc] = 0; |
| } |
| } else { /* No file, return 0 bytes */ |
| *buf = 0; |
| rc = 0; |
| } |
| up_read(filesem); |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(fsg_show_file); |
| |
| ssize_t fsg_show_cdrom(struct fsg_lun *curlun, char *buf) |
| { |
| return sprintf(buf, "%u\n", curlun->cdrom); |
| } |
| EXPORT_SYMBOL_GPL(fsg_show_cdrom); |
| |
| ssize_t fsg_show_removable(struct fsg_lun *curlun, char *buf) |
| { |
| return sprintf(buf, "%u\n", curlun->removable); |
| } |
| EXPORT_SYMBOL_GPL(fsg_show_removable); |
| |
| ssize_t fsg_show_inquiry_string(struct fsg_lun *curlun, char *buf) |
| { |
| return sprintf(buf, "%s\n", curlun->inquiry_string); |
| } |
| EXPORT_SYMBOL_GPL(fsg_show_inquiry_string); |
| |
| /* |
| * The caller must hold fsg->filesem for reading when calling this function. |
| */ |
| static ssize_t _fsg_store_ro(struct fsg_lun *curlun, bool ro) |
| { |
| if (fsg_lun_is_open(curlun)) { |
| LDBG(curlun, "read-only status change prevented\n"); |
| return -EBUSY; |
| } |
| |
| curlun->ro = ro; |
| curlun->initially_ro = ro; |
| LDBG(curlun, "read-only status set to %d\n", curlun->ro); |
| |
| return 0; |
| } |
| |
| ssize_t fsg_store_ro(struct fsg_lun *curlun, struct rw_semaphore *filesem, |
| const char *buf, size_t count) |
| { |
| ssize_t rc; |
| bool ro; |
| |
| rc = kstrtobool(buf, &ro); |
| if (rc) |
| return rc; |
| |
| /* |
| * Allow the write-enable status to change only while the |
| * backing file is closed. |
| */ |
| down_read(filesem); |
| rc = _fsg_store_ro(curlun, ro); |
| if (!rc) |
| rc = count; |
| up_read(filesem); |
| |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(fsg_store_ro); |
| |
| ssize_t fsg_store_nofua(struct fsg_lun *curlun, const char *buf, size_t count) |
| { |
| bool nofua; |
| int ret; |
| |
| ret = kstrtobool(buf, &nofua); |
| if (ret) |
| return ret; |
| |
| /* Sync data when switching from async mode to sync */ |
| if (!nofua && curlun->nofua) |
| fsg_lun_fsync_sub(curlun); |
| |
| curlun->nofua = nofua; |
| |
| return count; |
| } |
| EXPORT_SYMBOL_GPL(fsg_store_nofua); |
| |
| ssize_t fsg_store_file(struct fsg_lun *curlun, struct rw_semaphore *filesem, |
| const char *buf, size_t count) |
| { |
| int rc = 0; |
| |
| if (curlun->prevent_medium_removal && fsg_lun_is_open(curlun)) { |
| LDBG(curlun, "eject attempt prevented\n"); |
| return -EBUSY; /* "Door is locked" */ |
| } |
| |
| /* Remove a trailing newline */ |
| if (count > 0 && buf[count-1] == '\n') |
| ((char *) buf)[count-1] = 0; /* Ugh! */ |
| |
| /* Load new medium */ |
| down_write(filesem); |
| if (count > 0 && buf[0]) { |
| /* fsg_lun_open() will close existing file if any. */ |
| rc = fsg_lun_open(curlun, buf); |
| if (rc == 0) |
| curlun->unit_attention_data = |
| SS_NOT_READY_TO_READY_TRANSITION; |
| } else if (fsg_lun_is_open(curlun)) { |
| fsg_lun_close(curlun); |
| curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT; |
| } |
| up_write(filesem); |
| return (rc < 0 ? rc : count); |
| } |
| EXPORT_SYMBOL_GPL(fsg_store_file); |
| |
| ssize_t fsg_store_cdrom(struct fsg_lun *curlun, struct rw_semaphore *filesem, |
| const char *buf, size_t count) |
| { |
| bool cdrom; |
| int ret; |
| |
| ret = kstrtobool(buf, &cdrom); |
| if (ret) |
| return ret; |
| |
| down_read(filesem); |
| ret = cdrom ? _fsg_store_ro(curlun, true) : 0; |
| |
| if (!ret) { |
| curlun->cdrom = cdrom; |
| ret = count; |
| } |
| up_read(filesem); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(fsg_store_cdrom); |
| |
| ssize_t fsg_store_removable(struct fsg_lun *curlun, const char *buf, |
| size_t count) |
| { |
| bool removable; |
| int ret; |
| |
| ret = kstrtobool(buf, &removable); |
| if (ret) |
| return ret; |
| |
| curlun->removable = removable; |
| |
| return count; |
| } |
| EXPORT_SYMBOL_GPL(fsg_store_removable); |
| |
| ssize_t fsg_store_inquiry_string(struct fsg_lun *curlun, const char *buf, |
| size_t count) |
| { |
| const size_t len = min(count, sizeof(curlun->inquiry_string)); |
| |
| if (len == 0 || buf[0] == '\n') { |
| curlun->inquiry_string[0] = 0; |
| } else { |
| snprintf(curlun->inquiry_string, |
| sizeof(curlun->inquiry_string), "%-28s", buf); |
| if (curlun->inquiry_string[len-1] == '\n') |
| curlun->inquiry_string[len-1] = ' '; |
| } |
| |
| return count; |
| } |
| EXPORT_SYMBOL_GPL(fsg_store_inquiry_string); |
| |
| ssize_t fsg_store_forced_eject(struct fsg_lun *curlun, struct rw_semaphore *filesem, |
| const char *buf, size_t count) |
| { |
| int ret; |
| |
| /* |
| * Forcibly detach the backing file from the LUN |
| * regardless of whether the host has allowed it. |
| */ |
| curlun->prevent_medium_removal = 0; |
| ret = fsg_store_file(curlun, filesem, "", 0); |
| return ret < 0 ? ret : count; |
| } |
| EXPORT_SYMBOL_GPL(fsg_store_forced_eject); |
| |
| MODULE_LICENSE("GPL"); |