| /* |
| * ti-sysc.c - Texas Instruments sysc interconnect target driver |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed "as is" WITHOUT ANY WARRANTY of any |
| * kind, whether express or implied; without even the implied warranty |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/io.h> |
| #include <linux/clk.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/of_address.h> |
| #include <linux/of_platform.h> |
| #include <linux/platform_data/ti-sysc.h> |
| |
| #include <dt-bindings/bus/ti-sysc.h> |
| |
| enum sysc_registers { |
| SYSC_REVISION, |
| SYSC_SYSCONFIG, |
| SYSC_SYSSTATUS, |
| SYSC_MAX_REGS, |
| }; |
| |
| static const char * const reg_names[] = { "rev", "sysc", "syss", }; |
| |
| enum sysc_clocks { |
| SYSC_FCK, |
| SYSC_ICK, |
| SYSC_MAX_CLOCKS, |
| }; |
| |
| static const char * const clock_names[] = { "fck", "ick", }; |
| |
| #define SYSC_IDLEMODE_MASK 3 |
| #define SYSC_CLOCKACTIVITY_MASK 3 |
| |
| /** |
| * struct sysc - TI sysc interconnect target module registers and capabilities |
| * @dev: struct device pointer |
| * @module_pa: physical address of the interconnect target module |
| * @module_size: size of the interconnect target module |
| * @module_va: virtual address of the interconnect target module |
| * @offsets: register offsets from module base |
| * @clocks: clocks used by the interconnect target module |
| * @legacy_mode: configured for legacy mode if set |
| * @cap: interconnect target module capabilities |
| * @cfg: interconnect target module configuration |
| * @name: name if available |
| * @revision: interconnect target module revision |
| */ |
| struct sysc { |
| struct device *dev; |
| u64 module_pa; |
| u32 module_size; |
| void __iomem *module_va; |
| int offsets[SYSC_MAX_REGS]; |
| struct clk *clocks[SYSC_MAX_CLOCKS]; |
| const char *legacy_mode; |
| const struct sysc_capabilities *cap; |
| struct sysc_config cfg; |
| const char *name; |
| u32 revision; |
| }; |
| |
| static u32 sysc_read(struct sysc *ddata, int offset) |
| { |
| if (ddata->cfg.quirks & SYSC_QUIRK_16BIT) { |
| u32 val; |
| |
| val = readw_relaxed(ddata->module_va + offset); |
| val |= (readw_relaxed(ddata->module_va + offset + 4) << 16); |
| |
| return val; |
| } |
| |
| return readl_relaxed(ddata->module_va + offset); |
| } |
| |
| static u32 sysc_read_revision(struct sysc *ddata) |
| { |
| int offset = ddata->offsets[SYSC_REVISION]; |
| |
| if (offset < 0) |
| return 0; |
| |
| return sysc_read(ddata, offset); |
| } |
| |
| static int sysc_get_one_clock(struct sysc *ddata, |
| enum sysc_clocks index) |
| { |
| const char *name; |
| int error; |
| |
| switch (index) { |
| case SYSC_FCK: |
| break; |
| case SYSC_ICK: |
| break; |
| default: |
| return -EINVAL; |
| } |
| name = clock_names[index]; |
| |
| ddata->clocks[index] = devm_clk_get(ddata->dev, name); |
| if (IS_ERR(ddata->clocks[index])) { |
| if (PTR_ERR(ddata->clocks[index]) == -ENOENT) |
| return 0; |
| |
| dev_err(ddata->dev, "clock get error for %s: %li\n", |
| name, PTR_ERR(ddata->clocks[index])); |
| |
| return PTR_ERR(ddata->clocks[index]); |
| } |
| |
| error = clk_prepare(ddata->clocks[index]); |
| if (error) { |
| dev_err(ddata->dev, "clock prepare error for %s: %i\n", |
| name, error); |
| |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static int sysc_get_clocks(struct sysc *ddata) |
| { |
| int i, error; |
| |
| if (ddata->legacy_mode) |
| return 0; |
| |
| for (i = 0; i < SYSC_MAX_CLOCKS; i++) { |
| error = sysc_get_one_clock(ddata, i); |
| if (error && error != -ENOENT) |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * sysc_parse_and_check_child_range - parses module IO region from ranges |
| * @ddata: device driver data |
| * |
| * In general we only need rev, syss, and sysc registers and not the whole |
| * module range. But we do want the offsets for these registers from the |
| * module base. This allows us to check them against the legacy hwmod |
| * platform data. Let's also check the ranges are configured properly. |
| */ |
| static int sysc_parse_and_check_child_range(struct sysc *ddata) |
| { |
| struct device_node *np = ddata->dev->of_node; |
| const __be32 *ranges; |
| u32 nr_addr, nr_size; |
| int len, error; |
| |
| ranges = of_get_property(np, "ranges", &len); |
| if (!ranges) { |
| dev_err(ddata->dev, "missing ranges for %pOF\n", np); |
| |
| return -ENOENT; |
| } |
| |
| len /= sizeof(*ranges); |
| |
| if (len < 3) { |
| dev_err(ddata->dev, "incomplete ranges for %pOF\n", np); |
| |
| return -EINVAL; |
| } |
| |
| error = of_property_read_u32(np, "#address-cells", &nr_addr); |
| if (error) |
| return -ENOENT; |
| |
| error = of_property_read_u32(np, "#size-cells", &nr_size); |
| if (error) |
| return -ENOENT; |
| |
| if (nr_addr != 1 || nr_size != 1) { |
| dev_err(ddata->dev, "invalid ranges for %pOF\n", np); |
| |
| return -EINVAL; |
| } |
| |
| ranges++; |
| ddata->module_pa = of_translate_address(np, ranges++); |
| ddata->module_size = be32_to_cpup(ranges); |
| |
| dev_dbg(ddata->dev, "interconnect target 0x%llx size 0x%x for %pOF\n", |
| ddata->module_pa, ddata->module_size, np); |
| |
| return 0; |
| } |
| |
| /** |
| * sysc_check_one_child - check child configuration |
| * @ddata: device driver data |
| * @np: child device node |
| * |
| * Let's avoid messy situations where we have new interconnect target |
| * node but children have "ti,hwmods". These belong to the interconnect |
| * target node and are managed by this driver. |
| */ |
| static int sysc_check_one_child(struct sysc *ddata, |
| struct device_node *np) |
| { |
| const char *name; |
| |
| name = of_get_property(np, "ti,hwmods", NULL); |
| if (name) |
| dev_warn(ddata->dev, "really a child ti,hwmods property?"); |
| |
| return 0; |
| } |
| |
| static int sysc_check_children(struct sysc *ddata) |
| { |
| struct device_node *child; |
| int error; |
| |
| for_each_child_of_node(ddata->dev->of_node, child) { |
| error = sysc_check_one_child(ddata, child); |
| if (error) |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * So far only I2C uses 16-bit read access with clockactivity with revision |
| * in two registers with stride of 4. We can detect this based on the rev |
| * register size to configure things far enough to be able to properly read |
| * the revision register. |
| */ |
| static void sysc_check_quirk_16bit(struct sysc *ddata, struct resource *res) |
| { |
| if (resource_size(res) == 8) { |
| dev_dbg(ddata->dev, |
| "enabling 16-bit and clockactivity quirks\n"); |
| ddata->cfg.quirks |= SYSC_QUIRK_16BIT | SYSC_QUIRK_USE_CLOCKACT; |
| } |
| } |
| |
| /** |
| * sysc_parse_one - parses the interconnect target module registers |
| * @ddata: device driver data |
| * @reg: register to parse |
| */ |
| static int sysc_parse_one(struct sysc *ddata, enum sysc_registers reg) |
| { |
| struct resource *res; |
| const char *name; |
| |
| switch (reg) { |
| case SYSC_REVISION: |
| case SYSC_SYSCONFIG: |
| case SYSC_SYSSTATUS: |
| name = reg_names[reg]; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| res = platform_get_resource_byname(to_platform_device(ddata->dev), |
| IORESOURCE_MEM, name); |
| if (!res) { |
| dev_dbg(ddata->dev, "has no %s register\n", name); |
| ddata->offsets[reg] = -ENODEV; |
| |
| return 0; |
| } |
| |
| ddata->offsets[reg] = res->start - ddata->module_pa; |
| if (reg == SYSC_REVISION) |
| sysc_check_quirk_16bit(ddata, res); |
| |
| return 0; |
| } |
| |
| static int sysc_parse_registers(struct sysc *ddata) |
| { |
| int i, error; |
| |
| for (i = 0; i < SYSC_MAX_REGS; i++) { |
| error = sysc_parse_one(ddata, i); |
| if (error) |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * sysc_check_registers - check for misconfigured register overlaps |
| * @ddata: device driver data |
| */ |
| static int sysc_check_registers(struct sysc *ddata) |
| { |
| int i, j, nr_regs = 0, nr_matches = 0; |
| |
| for (i = 0; i < SYSC_MAX_REGS; i++) { |
| if (ddata->offsets[i] < 0) |
| continue; |
| |
| if (ddata->offsets[i] > (ddata->module_size - 4)) { |
| dev_err(ddata->dev, "register outside module range"); |
| |
| return -EINVAL; |
| } |
| |
| for (j = 0; j < SYSC_MAX_REGS; j++) { |
| if (ddata->offsets[j] < 0) |
| continue; |
| |
| if (ddata->offsets[i] == ddata->offsets[j]) |
| nr_matches++; |
| } |
| nr_regs++; |
| } |
| |
| if (nr_regs < 1) { |
| dev_err(ddata->dev, "missing registers\n"); |
| |
| return -EINVAL; |
| } |
| |
| if (nr_matches > nr_regs) { |
| dev_err(ddata->dev, "overlapping registers: (%i/%i)", |
| nr_regs, nr_matches); |
| |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * syc_ioremap - ioremap register space for the interconnect target module |
| * @ddata: deviec driver data |
| * |
| * Note that the interconnect target module registers can be anywhere |
| * within the first child device address space. For example, SGX has |
| * them at offset 0x1fc00 in the 32MB module address space. We just |
| * what we need around the interconnect target module registers. |
| */ |
| static int sysc_ioremap(struct sysc *ddata) |
| { |
| u32 size = 0; |
| |
| if (ddata->offsets[SYSC_SYSSTATUS] >= 0) |
| size = ddata->offsets[SYSC_SYSSTATUS]; |
| else if (ddata->offsets[SYSC_SYSCONFIG] >= 0) |
| size = ddata->offsets[SYSC_SYSCONFIG]; |
| else if (ddata->offsets[SYSC_REVISION] >= 0) |
| size = ddata->offsets[SYSC_REVISION]; |
| else |
| return -EINVAL; |
| |
| size &= 0xfff00; |
| size += SZ_256; |
| |
| ddata->module_va = devm_ioremap(ddata->dev, |
| ddata->module_pa, |
| size); |
| if (!ddata->module_va) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| /** |
| * sysc_map_and_check_registers - ioremap and check device registers |
| * @ddata: device driver data |
| */ |
| static int sysc_map_and_check_registers(struct sysc *ddata) |
| { |
| int error; |
| |
| error = sysc_parse_and_check_child_range(ddata); |
| if (error) |
| return error; |
| |
| error = sysc_check_children(ddata); |
| if (error) |
| return error; |
| |
| error = sysc_parse_registers(ddata); |
| if (error) |
| return error; |
| |
| error = sysc_ioremap(ddata); |
| if (error) |
| return error; |
| |
| error = sysc_check_registers(ddata); |
| if (error) |
| return error; |
| |
| return 0; |
| } |
| |
| /** |
| * sysc_show_rev - read and show interconnect target module revision |
| * @bufp: buffer to print the information to |
| * @ddata: device driver data |
| */ |
| static int sysc_show_rev(char *bufp, struct sysc *ddata) |
| { |
| int len; |
| |
| if (ddata->offsets[SYSC_REVISION] < 0) |
| return sprintf(bufp, ":NA"); |
| |
| len = sprintf(bufp, ":%08x", ddata->revision); |
| |
| return len; |
| } |
| |
| static int sysc_show_reg(struct sysc *ddata, |
| char *bufp, enum sysc_registers reg) |
| { |
| if (ddata->offsets[reg] < 0) |
| return sprintf(bufp, ":NA"); |
| |
| return sprintf(bufp, ":%x", ddata->offsets[reg]); |
| } |
| |
| /** |
| * sysc_show_registers - show information about interconnect target module |
| * @ddata: device driver data |
| */ |
| static void sysc_show_registers(struct sysc *ddata) |
| { |
| char buf[128]; |
| char *bufp = buf; |
| int i; |
| |
| for (i = 0; i < SYSC_MAX_REGS; i++) |
| bufp += sysc_show_reg(ddata, bufp, i); |
| |
| bufp += sysc_show_rev(bufp, ddata); |
| |
| dev_dbg(ddata->dev, "%llx:%x%s\n", |
| ddata->module_pa, ddata->module_size, |
| buf); |
| } |
| |
| static int __maybe_unused sysc_runtime_suspend(struct device *dev) |
| { |
| struct sysc *ddata; |
| int i; |
| |
| ddata = dev_get_drvdata(dev); |
| |
| if (ddata->legacy_mode) |
| return 0; |
| |
| for (i = 0; i < SYSC_MAX_CLOCKS; i++) { |
| if (IS_ERR_OR_NULL(ddata->clocks[i])) |
| continue; |
| clk_disable(ddata->clocks[i]); |
| } |
| |
| return 0; |
| } |
| |
| static int __maybe_unused sysc_runtime_resume(struct device *dev) |
| { |
| struct sysc *ddata; |
| int i, error; |
| |
| ddata = dev_get_drvdata(dev); |
| |
| if (ddata->legacy_mode) |
| return 0; |
| |
| for (i = 0; i < SYSC_MAX_CLOCKS; i++) { |
| if (IS_ERR_OR_NULL(ddata->clocks[i])) |
| continue; |
| error = clk_enable(ddata->clocks[i]); |
| if (error) |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops sysc_pm_ops = { |
| SET_RUNTIME_PM_OPS(sysc_runtime_suspend, |
| sysc_runtime_resume, |
| NULL) |
| }; |
| |
| /* At this point the module is configured enough to read the revision */ |
| static int sysc_init_module(struct sysc *ddata) |
| { |
| int error; |
| |
| error = pm_runtime_get_sync(ddata->dev); |
| if (error < 0) { |
| pm_runtime_put_noidle(ddata->dev); |
| |
| return 0; |
| } |
| ddata->revision = sysc_read_revision(ddata); |
| pm_runtime_put_sync(ddata->dev); |
| |
| return 0; |
| } |
| |
| static int sysc_init_sysc_mask(struct sysc *ddata) |
| { |
| struct device_node *np = ddata->dev->of_node; |
| int error; |
| u32 val; |
| |
| error = of_property_read_u32(np, "ti,sysc-mask", &val); |
| if (error) |
| return 0; |
| |
| if (val) |
| ddata->cfg.sysc_val = val & ddata->cap->sysc_mask; |
| else |
| ddata->cfg.sysc_val = ddata->cap->sysc_mask; |
| |
| return 0; |
| } |
| |
| static int sysc_init_idlemode(struct sysc *ddata, u8 *idlemodes, |
| const char *name) |
| { |
| struct device_node *np = ddata->dev->of_node; |
| struct property *prop; |
| const __be32 *p; |
| u32 val; |
| |
| of_property_for_each_u32(np, name, prop, p, val) { |
| if (val >= SYSC_NR_IDLEMODES) { |
| dev_err(ddata->dev, "invalid idlemode: %i\n", val); |
| return -EINVAL; |
| } |
| *idlemodes |= (1 << val); |
| } |
| |
| return 0; |
| } |
| |
| static int sysc_init_idlemodes(struct sysc *ddata) |
| { |
| int error; |
| |
| error = sysc_init_idlemode(ddata, &ddata->cfg.midlemodes, |
| "ti,sysc-midle"); |
| if (error) |
| return error; |
| |
| error = sysc_init_idlemode(ddata, &ddata->cfg.sidlemodes, |
| "ti,sysc-sidle"); |
| if (error) |
| return error; |
| |
| return 0; |
| } |
| |
| /* |
| * Only some devices on omap4 and later have SYSCONFIG reset done |
| * bit. We can detect this if there is no SYSSTATUS at all, or the |
| * SYSTATUS bit 0 is not used. Note that some SYSSTATUS registers |
| * have multiple bits for the child devices like OHCI and EHCI. |
| * Depends on SYSC being parsed first. |
| */ |
| static int sysc_init_syss_mask(struct sysc *ddata) |
| { |
| struct device_node *np = ddata->dev->of_node; |
| int error; |
| u32 val; |
| |
| error = of_property_read_u32(np, "ti,syss-mask", &val); |
| if (error) { |
| if ((ddata->cap->type == TI_SYSC_OMAP4 || |
| ddata->cap->type == TI_SYSC_OMAP4_TIMER) && |
| (ddata->cfg.sysc_val & SYSC_OMAP4_SOFTRESET)) |
| ddata->cfg.quirks |= SYSC_QUIRK_RESET_STATUS; |
| |
| return 0; |
| } |
| |
| if (!(val & 1) && (ddata->cfg.sysc_val & SYSC_OMAP4_SOFTRESET)) |
| ddata->cfg.quirks |= SYSC_QUIRK_RESET_STATUS; |
| |
| ddata->cfg.syss_mask = val; |
| |
| return 0; |
| } |
| |
| /* Device tree configured quirks */ |
| struct sysc_dts_quirk { |
| const char *name; |
| u32 mask; |
| }; |
| |
| static const struct sysc_dts_quirk sysc_dts_quirks[] = { |
| { .name = "ti,no-idle-on-init", |
| .mask = SYSC_QUIRK_NO_IDLE_ON_INIT, }, |
| { .name = "ti,no-reset-on-init", |
| .mask = SYSC_QUIRK_NO_RESET_ON_INIT, }, |
| }; |
| |
| static int sysc_init_dts_quirks(struct sysc *ddata) |
| { |
| struct device_node *np = ddata->dev->of_node; |
| const struct property *prop; |
| int i, len, error; |
| u32 val; |
| |
| ddata->legacy_mode = of_get_property(np, "ti,hwmods", NULL); |
| |
| for (i = 0; i < ARRAY_SIZE(sysc_dts_quirks); i++) { |
| prop = of_get_property(np, sysc_dts_quirks[i].name, &len); |
| if (!prop) |
| continue; |
| |
| ddata->cfg.quirks |= sysc_dts_quirks[i].mask; |
| } |
| |
| error = of_property_read_u32(np, "ti,sysc-delay-us", &val); |
| if (!error) { |
| if (val > 255) { |
| dev_warn(ddata->dev, "bad ti,sysc-delay-us: %i\n", |
| val); |
| } |
| |
| ddata->cfg.srst_udelay = (u8)val; |
| } |
| |
| return 0; |
| } |
| |
| static void sysc_unprepare(struct sysc *ddata) |
| { |
| int i; |
| |
| for (i = 0; i < SYSC_MAX_CLOCKS; i++) { |
| if (!IS_ERR_OR_NULL(ddata->clocks[i])) |
| clk_unprepare(ddata->clocks[i]); |
| } |
| } |
| |
| /* |
| * Common sysc register bits found on omap2, also known as type1 |
| */ |
| static const struct sysc_regbits sysc_regbits_omap2 = { |
| .dmadisable_shift = -ENODEV, |
| .midle_shift = 12, |
| .sidle_shift = 3, |
| .clkact_shift = 8, |
| .emufree_shift = 5, |
| .enwkup_shift = 2, |
| .srst_shift = 1, |
| .autoidle_shift = 0, |
| }; |
| |
| static const struct sysc_capabilities sysc_omap2 = { |
| .type = TI_SYSC_OMAP2, |
| .sysc_mask = SYSC_OMAP2_CLOCKACTIVITY | SYSC_OMAP2_EMUFREE | |
| SYSC_OMAP2_ENAWAKEUP | SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE, |
| .regbits = &sysc_regbits_omap2, |
| }; |
| |
| /* All omap2 and 3 timers, and timers 1, 2 & 10 on omap 4 and 5 */ |
| static const struct sysc_capabilities sysc_omap2_timer = { |
| .type = TI_SYSC_OMAP2_TIMER, |
| .sysc_mask = SYSC_OMAP2_CLOCKACTIVITY | SYSC_OMAP2_EMUFREE | |
| SYSC_OMAP2_ENAWAKEUP | SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE, |
| .regbits = &sysc_regbits_omap2, |
| .mod_quirks = SYSC_QUIRK_USE_CLOCKACT, |
| }; |
| |
| /* |
| * SHAM2 (SHA1/MD5) sysc found on omap3, a variant of sysc_regbits_omap2 |
| * with different sidle position |
| */ |
| static const struct sysc_regbits sysc_regbits_omap3_sham = { |
| .dmadisable_shift = -ENODEV, |
| .midle_shift = -ENODEV, |
| .sidle_shift = 4, |
| .clkact_shift = -ENODEV, |
| .enwkup_shift = -ENODEV, |
| .srst_shift = 1, |
| .autoidle_shift = 0, |
| .emufree_shift = -ENODEV, |
| }; |
| |
| static const struct sysc_capabilities sysc_omap3_sham = { |
| .type = TI_SYSC_OMAP3_SHAM, |
| .sysc_mask = SYSC_OMAP2_SOFTRESET | SYSC_OMAP2_AUTOIDLE, |
| .regbits = &sysc_regbits_omap3_sham, |
| }; |
| |
| /* |
| * AES register bits found on omap3 and later, a variant of |
| * sysc_regbits_omap2 with different sidle position |
| */ |
| static const struct sysc_regbits sysc_regbits_omap3_aes = { |
| .dmadisable_shift = -ENODEV, |
| .midle_shift = -ENODEV, |
| .sidle_shift = 6, |
| .clkact_shift = -ENODEV, |
| .enwkup_shift = -ENODEV, |
| .srst_shift = 1, |
| .autoidle_shift = 0, |
| .emufree_shift = -ENODEV, |
| }; |
| |
| static const struct sysc_capabilities sysc_omap3_aes = { |
| .type = TI_SYSC_OMAP3_AES, |
| .sysc_mask = SYSC_OMAP2_SOFTRESET | SYSC_OMAP2_AUTOIDLE, |
| .regbits = &sysc_regbits_omap3_aes, |
| }; |
| |
| /* |
| * Common sysc register bits found on omap4, also known as type2 |
| */ |
| static const struct sysc_regbits sysc_regbits_omap4 = { |
| .dmadisable_shift = 16, |
| .midle_shift = 4, |
| .sidle_shift = 2, |
| .clkact_shift = -ENODEV, |
| .enwkup_shift = -ENODEV, |
| .emufree_shift = 1, |
| .srst_shift = 0, |
| .autoidle_shift = -ENODEV, |
| }; |
| |
| static const struct sysc_capabilities sysc_omap4 = { |
| .type = TI_SYSC_OMAP4, |
| .sysc_mask = SYSC_OMAP4_DMADISABLE | SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET, |
| .regbits = &sysc_regbits_omap4, |
| }; |
| |
| static const struct sysc_capabilities sysc_omap4_timer = { |
| .type = TI_SYSC_OMAP4_TIMER, |
| .sysc_mask = SYSC_OMAP4_DMADISABLE | SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET, |
| .regbits = &sysc_regbits_omap4, |
| }; |
| |
| /* |
| * Common sysc register bits found on omap4, also known as type3 |
| */ |
| static const struct sysc_regbits sysc_regbits_omap4_simple = { |
| .dmadisable_shift = -ENODEV, |
| .midle_shift = 2, |
| .sidle_shift = 0, |
| .clkact_shift = -ENODEV, |
| .enwkup_shift = -ENODEV, |
| .srst_shift = -ENODEV, |
| .emufree_shift = -ENODEV, |
| .autoidle_shift = -ENODEV, |
| }; |
| |
| static const struct sysc_capabilities sysc_omap4_simple = { |
| .type = TI_SYSC_OMAP4_SIMPLE, |
| .regbits = &sysc_regbits_omap4_simple, |
| }; |
| |
| /* |
| * SmartReflex sysc found on omap34xx |
| */ |
| static const struct sysc_regbits sysc_regbits_omap34xx_sr = { |
| .dmadisable_shift = -ENODEV, |
| .midle_shift = -ENODEV, |
| .sidle_shift = -ENODEV, |
| .clkact_shift = 20, |
| .enwkup_shift = -ENODEV, |
| .srst_shift = -ENODEV, |
| .emufree_shift = -ENODEV, |
| .autoidle_shift = -ENODEV, |
| }; |
| |
| static const struct sysc_capabilities sysc_34xx_sr = { |
| .type = TI_SYSC_OMAP34XX_SR, |
| .sysc_mask = SYSC_OMAP2_CLOCKACTIVITY, |
| .regbits = &sysc_regbits_omap34xx_sr, |
| .mod_quirks = SYSC_QUIRK_USE_CLOCKACT | SYSC_QUIRK_UNCACHED, |
| }; |
| |
| /* |
| * SmartReflex sysc found on omap36xx and later |
| */ |
| static const struct sysc_regbits sysc_regbits_omap36xx_sr = { |
| .dmadisable_shift = -ENODEV, |
| .midle_shift = -ENODEV, |
| .sidle_shift = 24, |
| .clkact_shift = -ENODEV, |
| .enwkup_shift = 26, |
| .srst_shift = -ENODEV, |
| .emufree_shift = -ENODEV, |
| .autoidle_shift = -ENODEV, |
| }; |
| |
| static const struct sysc_capabilities sysc_36xx_sr = { |
| .type = TI_SYSC_OMAP36XX_SR, |
| .sysc_mask = SYSC_OMAP3_SR_ENAWAKEUP, |
| .regbits = &sysc_regbits_omap36xx_sr, |
| .mod_quirks = SYSC_QUIRK_UNCACHED, |
| }; |
| |
| static const struct sysc_capabilities sysc_omap4_sr = { |
| .type = TI_SYSC_OMAP4_SR, |
| .regbits = &sysc_regbits_omap36xx_sr, |
| }; |
| |
| /* |
| * McASP register bits found on omap4 and later |
| */ |
| static const struct sysc_regbits sysc_regbits_omap4_mcasp = { |
| .dmadisable_shift = -ENODEV, |
| .midle_shift = -ENODEV, |
| .sidle_shift = 0, |
| .clkact_shift = -ENODEV, |
| .enwkup_shift = -ENODEV, |
| .srst_shift = -ENODEV, |
| .emufree_shift = -ENODEV, |
| .autoidle_shift = -ENODEV, |
| }; |
| |
| static const struct sysc_capabilities sysc_omap4_mcasp = { |
| .type = TI_SYSC_OMAP4_MCASP, |
| .regbits = &sysc_regbits_omap4_mcasp, |
| }; |
| |
| /* |
| * FS USB host found on omap4 and later |
| */ |
| static const struct sysc_regbits sysc_regbits_omap4_usb_host_fs = { |
| .dmadisable_shift = -ENODEV, |
| .midle_shift = -ENODEV, |
| .sidle_shift = 24, |
| .clkact_shift = -ENODEV, |
| .enwkup_shift = 26, |
| .srst_shift = -ENODEV, |
| .emufree_shift = -ENODEV, |
| .autoidle_shift = -ENODEV, |
| }; |
| |
| static const struct sysc_capabilities sysc_omap4_usb_host_fs = { |
| .type = TI_SYSC_OMAP4_USB_HOST_FS, |
| .sysc_mask = SYSC_OMAP2_ENAWAKEUP, |
| .regbits = &sysc_regbits_omap4_usb_host_fs, |
| }; |
| |
| static int sysc_init_match(struct sysc *ddata) |
| { |
| const struct sysc_capabilities *cap; |
| |
| cap = of_device_get_match_data(ddata->dev); |
| if (!cap) |
| return -EINVAL; |
| |
| ddata->cap = cap; |
| if (ddata->cap) |
| ddata->cfg.quirks |= ddata->cap->mod_quirks; |
| |
| return 0; |
| } |
| |
| static int sysc_probe(struct platform_device *pdev) |
| { |
| struct sysc *ddata; |
| int error; |
| |
| ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL); |
| if (!ddata) |
| return -ENOMEM; |
| |
| ddata->dev = &pdev->dev; |
| platform_set_drvdata(pdev, ddata); |
| |
| error = sysc_init_match(ddata); |
| if (error) |
| return error; |
| |
| error = sysc_init_dts_quirks(ddata); |
| if (error) |
| goto unprepare; |
| |
| error = sysc_get_clocks(ddata); |
| if (error) |
| return error; |
| |
| error = sysc_map_and_check_registers(ddata); |
| if (error) |
| goto unprepare; |
| |
| error = sysc_init_sysc_mask(ddata); |
| if (error) |
| goto unprepare; |
| |
| error = sysc_init_idlemodes(ddata); |
| if (error) |
| goto unprepare; |
| |
| error = sysc_init_syss_mask(ddata); |
| if (error) |
| goto unprepare; |
| |
| pm_runtime_enable(ddata->dev); |
| |
| error = sysc_init_module(ddata); |
| if (error) |
| goto unprepare; |
| |
| error = pm_runtime_get_sync(ddata->dev); |
| if (error < 0) { |
| pm_runtime_put_noidle(ddata->dev); |
| pm_runtime_disable(ddata->dev); |
| goto unprepare; |
| } |
| |
| pm_runtime_use_autosuspend(ddata->dev); |
| |
| sysc_show_registers(ddata); |
| |
| error = of_platform_populate(ddata->dev->of_node, |
| NULL, NULL, ddata->dev); |
| if (error) |
| goto err; |
| |
| pm_runtime_mark_last_busy(ddata->dev); |
| pm_runtime_put_autosuspend(ddata->dev); |
| |
| return 0; |
| |
| err: |
| pm_runtime_dont_use_autosuspend(&pdev->dev); |
| pm_runtime_put_sync(&pdev->dev); |
| pm_runtime_disable(&pdev->dev); |
| unprepare: |
| sysc_unprepare(ddata); |
| |
| return error; |
| } |
| |
| static int sysc_remove(struct platform_device *pdev) |
| { |
| struct sysc *ddata = platform_get_drvdata(pdev); |
| int error; |
| |
| error = pm_runtime_get_sync(ddata->dev); |
| if (error < 0) { |
| pm_runtime_put_noidle(ddata->dev); |
| pm_runtime_disable(ddata->dev); |
| goto unprepare; |
| } |
| |
| of_platform_depopulate(&pdev->dev); |
| |
| pm_runtime_dont_use_autosuspend(&pdev->dev); |
| pm_runtime_put_sync(&pdev->dev); |
| pm_runtime_disable(&pdev->dev); |
| |
| unprepare: |
| sysc_unprepare(ddata); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id sysc_match[] = { |
| { .compatible = "ti,sysc-omap2", .data = &sysc_omap2, }, |
| { .compatible = "ti,sysc-omap2-timer", .data = &sysc_omap2_timer, }, |
| { .compatible = "ti,sysc-omap4", .data = &sysc_omap4, }, |
| { .compatible = "ti,sysc-omap4-timer", .data = &sysc_omap4_timer, }, |
| { .compatible = "ti,sysc-omap4-simple", .data = &sysc_omap4_simple, }, |
| { .compatible = "ti,sysc-omap3430-sr", .data = &sysc_34xx_sr, }, |
| { .compatible = "ti,sysc-omap3630-sr", .data = &sysc_36xx_sr, }, |
| { .compatible = "ti,sysc-omap4-sr", .data = &sysc_omap4_sr, }, |
| { .compatible = "ti,sysc-omap3-sham", .data = &sysc_omap3_sham, }, |
| { .compatible = "ti,sysc-omap-aes", .data = &sysc_omap3_aes, }, |
| { .compatible = "ti,sysc-mcasp", .data = &sysc_omap4_mcasp, }, |
| { .compatible = "ti,sysc-usb-host-fs", |
| .data = &sysc_omap4_usb_host_fs, }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, sysc_match); |
| |
| static struct platform_driver sysc_driver = { |
| .probe = sysc_probe, |
| .remove = sysc_remove, |
| .driver = { |
| .name = "ti-sysc", |
| .of_match_table = sysc_match, |
| .pm = &sysc_pm_ops, |
| }, |
| }; |
| module_platform_driver(sysc_driver); |
| |
| MODULE_DESCRIPTION("TI sysc interconnect target driver"); |
| MODULE_LICENSE("GPL v2"); |