arch/arm/mach-footbridge/common.c

// SPDX-License-Identifier: GPL-2.0-only
/*
 *  linux/arch/arm/mach-footbridge/common.c
 *
 *  Copyright (C) 1998-2000 Russell King, Dave Gilbert.
 */
#include <linux/module.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/ioport.h>
#include <linux/list.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spinlock.h>
#include <video/vga.h>

#include <asm/page.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
#include <asm/system_misc.h>
#include <asm/hardware/dec21285.h>

#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/pci.h>

#include "common.h"

#include <mach/hardware.h>
#include <mach/irqs.h>
#include <asm/hardware/dec21285.h>

static int dc21285_get_irq(void)
{
	void __iomem *irqstatus = (void __iomem *)CSR_IRQ_STATUS;
	u32 mask = readl(irqstatus);

	if (mask & IRQ_MASK_SDRAMPARITY)
		return IRQ_SDRAMPARITY;

	if (mask & IRQ_MASK_UART_RX)
		return IRQ_CONRX;

	if (mask & IRQ_MASK_DMA1)
		return IRQ_DMA1;

	if (mask & IRQ_MASK_DMA2)
		return IRQ_DMA2;

	if (mask & IRQ_MASK_IN0)
		return IRQ_IN0;

	if (mask & IRQ_MASK_IN1)
		return IRQ_IN1;

	if (mask & IRQ_MASK_IN2)
		return IRQ_IN2;

	if (mask & IRQ_MASK_IN3)
		return IRQ_IN3;

	if (mask & IRQ_MASK_PCI)
		return IRQ_PCI;

	if (mask & IRQ_MASK_DOORBELLHOST)
		return IRQ_DOORBELLHOST;

	if (mask & IRQ_MASK_I2OINPOST)
		return IRQ_I2OINPOST;

	if (mask & IRQ_MASK_TIMER1)
		return IRQ_TIMER1;

	if (mask & IRQ_MASK_TIMER2)
		return IRQ_TIMER2;

	if (mask & IRQ_MASK_TIMER3)
		return IRQ_TIMER3;

	if (mask & IRQ_MASK_UART_TX)
		return IRQ_CONTX;

	if (mask & IRQ_MASK_PCI_ABORT)
		return IRQ_PCI_ABORT;

	if (mask & IRQ_MASK_PCI_SERR)
		return IRQ_PCI_SERR;

	if (mask & IRQ_MASK_DISCARD_TIMER)
		return IRQ_DISCARD_TIMER;

	if (mask & IRQ_MASK_PCI_DPERR)
		return IRQ_PCI_DPERR;

	if (mask & IRQ_MASK_PCI_PERR)
		return IRQ_PCI_PERR;

	return 0;
}

static void dc21285_handle_irq(struct pt_regs *regs)
{
	int irq;
	do {
		irq = dc21285_get_irq();
		if (!irq)
			break;

		generic_handle_irq(irq);
	} while (1);
}


unsigned int mem_fclk_21285 = 50000000;

EXPORT_SYMBOL(mem_fclk_21285);

static int __init early_fclk(char *arg)
{
	mem_fclk_21285 = simple_strtoul(arg, NULL, 0);
	return 0;
}

early_param("mem_fclk_21285", early_fclk);

static int __init parse_tag_memclk(const struct tag *tag)
{
	mem_fclk_21285 = tag->u.memclk.fmemclk;
	return 0;
}

__tagtable(ATAG_MEMCLK, parse_tag_memclk);

/*
 * Footbridge IRQ translation table
 *  Converts from our IRQ numbers into FootBridge masks
 */
static const int fb_irq_mask[] = {
	IRQ_MASK_UART_RX,	/*  0 */
	IRQ_MASK_UART_TX,	/*  1 */
	IRQ_MASK_TIMER1,	/*  2 */
	IRQ_MASK_TIMER2,	/*  3 */
	IRQ_MASK_TIMER3,	/*  4 */
	IRQ_MASK_IN0,		/*  5 */
	IRQ_MASK_IN1,		/*  6 */
	IRQ_MASK_IN2,		/*  7 */
	IRQ_MASK_IN3,		/*  8 */
	IRQ_MASK_DOORBELLHOST,	/*  9 */
	IRQ_MASK_DMA1,		/* 10 */
	IRQ_MASK_DMA2,		/* 11 */
	IRQ_MASK_PCI,		/* 12 */
	IRQ_MASK_SDRAMPARITY,	/* 13 */
	IRQ_MASK_I2OINPOST,	/* 14 */
	IRQ_MASK_PCI_ABORT,	/* 15 */
	IRQ_MASK_PCI_SERR,	/* 16 */
	IRQ_MASK_DISCARD_TIMER,	/* 17 */
	IRQ_MASK_PCI_DPERR,	/* 18 */
	IRQ_MASK_PCI_PERR,	/* 19 */
};

static void fb_mask_irq(struct irq_data *d)
{
	*CSR_IRQ_DISABLE = fb_irq_mask[_DC21285_INR(d->irq)];
}

static void fb_unmask_irq(struct irq_data *d)
{
	*CSR_IRQ_ENABLE = fb_irq_mask[_DC21285_INR(d->irq)];
}

static struct irq_chip fb_chip = {
	.irq_ack	= fb_mask_irq,
	.irq_mask	= fb_mask_irq,
	.irq_unmask	= fb_unmask_irq,
};

static void __init __fb_init_irq(void)
{
	unsigned int irq;

	/*
	 * setup DC21285 IRQs
	 */
	*CSR_IRQ_DISABLE = -1;
	*CSR_FIQ_DISABLE = -1;

	for (irq = _DC21285_IRQ(0); irq < _DC21285_IRQ(20); irq++) {
		irq_set_chip_and_handler(irq, &fb_chip, handle_level_irq);
		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
	}
}

void __init footbridge_init_irq(void)
{
	set_handle_irq(dc21285_handle_irq);

	__fb_init_irq();

	if (!footbridge_cfn_mode())
		return;

	if (machine_is_ebsa285())
		/* The following is dependent on which slot
		 * you plug the Southbridge card into.  We
		 * currently assume that you plug it into
		 * the right-hand most slot.
		 */
		isa_init_irq(IRQ_PCI);

	if (machine_is_cats())
		isa_init_irq(IRQ_IN2);

	if (machine_is_netwinder())
		isa_init_irq(IRQ_IN3);
}

/*
 * Common mapping for all systems.  Note that the outbound write flush is
 * commented out since there is a "No Fix" problem with it.  Not mapping
 * it means that we have extra bullet protection on our feet.
 */
static struct map_desc fb_common_io_desc[] __initdata = {
	{
		.virtual	= ARMCSR_BASE,
		.pfn		= __phys_to_pfn(DC21285_ARMCSR_BASE),
		.length		= ARMCSR_SIZE,
		.type		= MT_DEVICE,
	}
};

/*
 * The mapping when the footbridge is in host mode.  We don't map any of
 * this when we are in add-in mode.
 */
static struct map_desc ebsa285_host_io_desc[] __initdata = {
#if defined(CONFIG_ARCH_FOOTBRIDGE) && defined(CONFIG_FOOTBRIDGE_HOST)
	{
		.virtual	= PCIMEM_BASE,
		.pfn		= __phys_to_pfn(DC21285_PCI_MEM),
		.length		= PCIMEM_SIZE,
		.type		= MT_DEVICE,
	}, {
		.virtual	= PCICFG0_BASE,
		.pfn		= __phys_to_pfn(DC21285_PCI_TYPE_0_CONFIG),
		.length		= PCICFG0_SIZE,
		.type		= MT_DEVICE,
	}, {
		.virtual	= PCICFG1_BASE,
		.pfn		= __phys_to_pfn(DC21285_PCI_TYPE_1_CONFIG),
		.length		= PCICFG1_SIZE,
		.type		= MT_DEVICE,
	}, {
		.virtual	= PCIIACK_BASE,
		.pfn		= __phys_to_pfn(DC21285_PCI_IACK),
		.length		= PCIIACK_SIZE,
		.type		= MT_DEVICE,
	},
#endif
};

void __init footbridge_map_io(void)
{
	/*
	 * Set up the common mapping first; we need this to
	 * determine whether we're in host mode or not.
	 */
	iotable_init(fb_common_io_desc, ARRAY_SIZE(fb_common_io_desc));

	/*
	 * Now, work out what we've got to map in addition on this
	 * platform.
	 */
	if (footbridge_cfn_mode()) {
		iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
		pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO));
	}

	vga_base = PCIMEM_BASE;
}

void footbridge_restart(enum reboot_mode mode, const char *cmd)
{
	if (mode == REBOOT_SOFT) {
		/* Jump into the ROM */
		soft_restart(0x41000000);
	} else {
		/*
		 * Force the watchdog to do a CPU reset.
		 *
		 * After making sure that the watchdog is disabled
		 * (so we can change the timer registers) we first
		 * enable the timer to autoreload itself.  Next, the
		 * timer interval is set really short and any
		 * current interrupt request is cleared (so we can
		 * see an edge transition).  Finally, TIMER4 is
		 * enabled as the watchdog.
		 */
		*CSR_SA110_CNTL &= ~(1 << 13);
		*CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE |
				   TIMER_CNTL_AUTORELOAD |
				   TIMER_CNTL_DIV16;
		*CSR_TIMER4_LOAD = 0x2;
		*CSR_TIMER4_CLR  = 0;
		*CSR_SA110_CNTL |= (1 << 13);
	}
}

#ifdef CONFIG_FOOTBRIDGE_ADDIN

static inline unsigned long fb_bus_sdram_offset(void)
{
	return *CSR_PCISDRAMBASE & 0xfffffff0;
}

/*
 * These two functions convert virtual addresses to PCI addresses and PCI
 * addresses to virtual addresses.  Note that it is only legal to use these
 * on memory obtained via get_zeroed_page or kmalloc.
 */
unsigned long __virt_to_bus(unsigned long res)
{
	WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);

	return res + (fb_bus_sdram_offset() - PAGE_OFFSET);
}
EXPORT_SYMBOL(__virt_to_bus);

unsigned long __bus_to_virt(unsigned long res)
{
	res = res - (fb_bus_sdram_offset() - PAGE_OFFSET);

	WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);

	return res;
}
EXPORT_SYMBOL(__bus_to_virt);

unsigned long __pfn_to_bus(unsigned long pfn)
{
	return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET);
}
EXPORT_SYMBOL(__pfn_to_bus);

unsigned long __bus_to_pfn(unsigned long bus)
{
	return __phys_to_pfn(bus - (fb_bus_sdram_offset() - PHYS_OFFSET));
}
EXPORT_SYMBOL(__bus_to_pfn);

#endif