| /* SPDX-License-Identifier: GPL-2.0-only */ |
| /* |
| * kexec for arm64 |
| * |
| * Copyright (C) Linaro. |
| * Copyright (C) Huawei Futurewei Technologies. |
| * Copyright (C) 2021, Microsoft Corporation. |
| * Pasha Tatashin <pasha.tatashin@soleen.com> |
| */ |
| |
| #include <linux/kexec.h> |
| #include <linux/linkage.h> |
| |
| #include <asm/assembler.h> |
| #include <asm/kexec.h> |
| #include <asm/page.h> |
| #include <asm/sysreg.h> |
| #include <asm/virt.h> |
| |
| .macro turn_off_mmu tmp1, tmp2 |
| mov_q \tmp1, INIT_SCTLR_EL1_MMU_OFF |
| pre_disable_mmu_workaround |
| msr sctlr_el1, \tmp1 |
| isb |
| .endm |
| |
| .section ".kexec_relocate.text", "ax" |
| /* |
| * arm64_relocate_new_kernel - Put a 2nd stage image in place and boot it. |
| * |
| * The memory that the old kernel occupies may be overwritten when copying the |
| * new image to its final location. To assure that the |
| * arm64_relocate_new_kernel routine which does that copy is not overwritten, |
| * all code and data needed by arm64_relocate_new_kernel must be between the |
| * symbols arm64_relocate_new_kernel and arm64_relocate_new_kernel_end. The |
| * machine_kexec() routine will copy arm64_relocate_new_kernel to the kexec |
| * safe memory that has been set up to be preserved during the copy operation. |
| */ |
| SYM_CODE_START(arm64_relocate_new_kernel) |
| /* Setup the list loop variables. */ |
| ldr x18, [x0, #KIMAGE_ARCH_ZERO_PAGE] /* x18 = zero page for BBM */ |
| ldr x17, [x0, #KIMAGE_ARCH_TTBR1] /* x17 = linear map copy */ |
| ldr x16, [x0, #KIMAGE_HEAD] /* x16 = kimage_head */ |
| ldr x22, [x0, #KIMAGE_ARCH_PHYS_OFFSET] /* x22 phys_offset */ |
| raw_dcache_line_size x15, x1 /* x15 = dcache line size */ |
| break_before_make_ttbr_switch x18, x17, x1, x2 /* set linear map */ |
| .Lloop: |
| and x12, x16, PAGE_MASK /* x12 = addr */ |
| sub x12, x12, x22 /* Convert x12 to virt */ |
| /* Test the entry flags. */ |
| .Ltest_source: |
| tbz x16, IND_SOURCE_BIT, .Ltest_indirection |
| |
| /* Invalidate dest page to PoC. */ |
| mov x19, x13 |
| copy_page x13, x12, x1, x2, x3, x4, x5, x6, x7, x8 |
| add x1, x19, #PAGE_SIZE |
| dcache_by_myline_op civac, sy, x19, x1, x15, x20 |
| b .Lnext |
| .Ltest_indirection: |
| tbz x16, IND_INDIRECTION_BIT, .Ltest_destination |
| mov x14, x12 /* ptr = addr */ |
| b .Lnext |
| .Ltest_destination: |
| tbz x16, IND_DESTINATION_BIT, .Lnext |
| mov x13, x12 /* dest = addr */ |
| .Lnext: |
| ldr x16, [x14], #8 /* entry = *ptr++ */ |
| tbz x16, IND_DONE_BIT, .Lloop /* while (!(entry & DONE)) */ |
| /* wait for writes from copy_page to finish */ |
| dsb nsh |
| ic iallu |
| dsb nsh |
| isb |
| ldr x4, [x0, #KIMAGE_START] /* relocation start */ |
| ldr x1, [x0, #KIMAGE_ARCH_EL2_VECTORS] /* relocation start */ |
| ldr x0, [x0, #KIMAGE_ARCH_DTB_MEM] /* dtb address */ |
| turn_off_mmu x12, x13 |
| |
| /* Start new image. */ |
| cbz x1, .Lel1 |
| mov x1, x4 /* relocation start */ |
| mov x2, x0 /* dtb address */ |
| mov x3, xzr |
| mov x4, xzr |
| mov x0, #HVC_SOFT_RESTART |
| hvc #0 /* Jumps from el2 */ |
| .Lel1: |
| mov x2, xzr |
| mov x3, xzr |
| br x4 /* Jumps from el1 */ |
| SYM_CODE_END(arm64_relocate_new_kernel) |