blob: 7e0f6bedc248c4f5d22c2558539c1ddf39024a97 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Irqdomain for Linux to run as the root partition on Microsoft Hypervisor.
*
* Authors:
* Sunil Muthuswamy <sunilmut@microsoft.com>
* Wei Liu <wei.liu@kernel.org>
*/
#include <linux/pci.h>
#include <linux/irq.h>
#include <asm/mshyperv.h>
static int hv_map_interrupt(union hv_device_id device_id, bool level,
int cpu, int vector, struct hv_interrupt_entry *entry)
{
struct hv_input_map_device_interrupt *input;
struct hv_output_map_device_interrupt *output;
struct hv_device_interrupt_descriptor *intr_desc;
unsigned long flags;
u64 status;
int nr_bank, var_size;
local_irq_save(flags);
input = *this_cpu_ptr(hyperv_pcpu_input_arg);
output = *this_cpu_ptr(hyperv_pcpu_output_arg);
intr_desc = &input->interrupt_descriptor;
memset(input, 0, sizeof(*input));
input->partition_id = hv_current_partition_id;
input->device_id = device_id.as_uint64;
intr_desc->interrupt_type = HV_X64_INTERRUPT_TYPE_FIXED;
intr_desc->vector_count = 1;
intr_desc->target.vector = vector;
if (level)
intr_desc->trigger_mode = HV_INTERRUPT_TRIGGER_MODE_LEVEL;
else
intr_desc->trigger_mode = HV_INTERRUPT_TRIGGER_MODE_EDGE;
intr_desc->target.vp_set.valid_bank_mask = 0;
intr_desc->target.vp_set.format = HV_GENERIC_SET_SPARSE_4K;
nr_bank = cpumask_to_vpset(&(intr_desc->target.vp_set), cpumask_of(cpu));
if (nr_bank < 0) {
local_irq_restore(flags);
pr_err("%s: unable to generate VP set\n", __func__);
return EINVAL;
}
intr_desc->target.flags = HV_DEVICE_INTERRUPT_TARGET_PROCESSOR_SET;
/*
* var-sized hypercall, var-size starts after vp_mask (thus
* vp_set.format does not count, but vp_set.valid_bank_mask
* does).
*/
var_size = nr_bank + 1;
status = hv_do_rep_hypercall(HVCALL_MAP_DEVICE_INTERRUPT, 0, var_size,
input, output);
*entry = output->interrupt_entry;
local_irq_restore(flags);
if (!hv_result_success(status))
pr_err("%s: hypercall failed, status %lld\n", __func__, status);
return hv_result(status);
}
static int hv_unmap_interrupt(u64 id, struct hv_interrupt_entry *old_entry)
{
unsigned long flags;
struct hv_input_unmap_device_interrupt *input;
struct hv_interrupt_entry *intr_entry;
u64 status;
local_irq_save(flags);
input = *this_cpu_ptr(hyperv_pcpu_input_arg);
memset(input, 0, sizeof(*input));
intr_entry = &input->interrupt_entry;
input->partition_id = hv_current_partition_id;
input->device_id = id;
*intr_entry = *old_entry;
status = hv_do_hypercall(HVCALL_UNMAP_DEVICE_INTERRUPT, input, NULL);
local_irq_restore(flags);
return hv_result(status);
}
#ifdef CONFIG_PCI_MSI
struct rid_data {
struct pci_dev *bridge;
u32 rid;
};
static int get_rid_cb(struct pci_dev *pdev, u16 alias, void *data)
{
struct rid_data *rd = data;
u8 bus = PCI_BUS_NUM(rd->rid);
if (pdev->bus->number != bus || PCI_BUS_NUM(alias) != bus) {
rd->bridge = pdev;
rd->rid = alias;
}
return 0;
}
static union hv_device_id hv_build_pci_dev_id(struct pci_dev *dev)
{
union hv_device_id dev_id;
struct rid_data data = {
.bridge = NULL,
.rid = PCI_DEVID(dev->bus->number, dev->devfn)
};
pci_for_each_dma_alias(dev, get_rid_cb, &data);
dev_id.as_uint64 = 0;
dev_id.device_type = HV_DEVICE_TYPE_PCI;
dev_id.pci.segment = pci_domain_nr(dev->bus);
dev_id.pci.bdf.bus = PCI_BUS_NUM(data.rid);
dev_id.pci.bdf.device = PCI_SLOT(data.rid);
dev_id.pci.bdf.function = PCI_FUNC(data.rid);
dev_id.pci.source_shadow = HV_SOURCE_SHADOW_NONE;
if (data.bridge) {
int pos;
/*
* Microsoft Hypervisor requires a bus range when the bridge is
* running in PCI-X mode.
*
* To distinguish conventional vs PCI-X bridge, we can check
* the bridge's PCI-X Secondary Status Register, Secondary Bus
* Mode and Frequency bits. See PCI Express to PCI/PCI-X Bridge
* Specification Revision 1.0 5.2.2.1.3.
*
* Value zero means it is in conventional mode, otherwise it is
* in PCI-X mode.
*/
pos = pci_find_capability(data.bridge, PCI_CAP_ID_PCIX);
if (pos) {
u16 status;
pci_read_config_word(data.bridge, pos +
PCI_X_BRIDGE_SSTATUS, &status);
if (status & PCI_X_SSTATUS_FREQ) {
/* Non-zero, PCI-X mode */
u8 sec_bus, sub_bus;
dev_id.pci.source_shadow = HV_SOURCE_SHADOW_BRIDGE_BUS_RANGE;
pci_read_config_byte(data.bridge, PCI_SECONDARY_BUS, &sec_bus);
dev_id.pci.shadow_bus_range.secondary_bus = sec_bus;
pci_read_config_byte(data.bridge, PCI_SUBORDINATE_BUS, &sub_bus);
dev_id.pci.shadow_bus_range.subordinate_bus = sub_bus;
}
}
}
return dev_id;
}
static int hv_map_msi_interrupt(struct pci_dev *dev, int cpu, int vector,
struct hv_interrupt_entry *entry)
{
union hv_device_id device_id = hv_build_pci_dev_id(dev);
return hv_map_interrupt(device_id, false, cpu, vector, entry);
}
static inline void entry_to_msi_msg(struct hv_interrupt_entry *entry, struct msi_msg *msg)
{
/* High address is always 0 */
msg->address_hi = 0;
msg->address_lo = entry->msi_entry.address.as_uint32;
msg->data = entry->msi_entry.data.as_uint32;
}
static int hv_unmap_msi_interrupt(struct pci_dev *dev, struct hv_interrupt_entry *old_entry);
static void hv_irq_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
{
struct msi_desc *msidesc;
struct pci_dev *dev;
struct hv_interrupt_entry out_entry, *stored_entry;
struct irq_cfg *cfg = irqd_cfg(data);
cpumask_t *affinity;
int cpu;
u64 status;
msidesc = irq_data_get_msi_desc(data);
dev = msi_desc_to_pci_dev(msidesc);
if (!cfg) {
pr_debug("%s: cfg is NULL", __func__);
return;
}
affinity = irq_data_get_effective_affinity_mask(data);
cpu = cpumask_first_and(affinity, cpu_online_mask);
if (data->chip_data) {
/*
* This interrupt is already mapped. Let's unmap first.
*
* We don't use retarget interrupt hypercalls here because
* Microsoft Hypervisor doens't allow root to change the vector
* or specify VPs outside of the set that is initially used
* during mapping.
*/
stored_entry = data->chip_data;
data->chip_data = NULL;
status = hv_unmap_msi_interrupt(dev, stored_entry);
kfree(stored_entry);
if (status != HV_STATUS_SUCCESS) {
pr_debug("%s: failed to unmap, status %lld", __func__, status);
return;
}
}
stored_entry = kzalloc(sizeof(*stored_entry), GFP_ATOMIC);
if (!stored_entry) {
pr_debug("%s: failed to allocate chip data\n", __func__);
return;
}
status = hv_map_msi_interrupt(dev, cpu, cfg->vector, &out_entry);
if (status != HV_STATUS_SUCCESS) {
kfree(stored_entry);
return;
}
*stored_entry = out_entry;
data->chip_data = stored_entry;
entry_to_msi_msg(&out_entry, msg);
return;
}
static int hv_unmap_msi_interrupt(struct pci_dev *dev, struct hv_interrupt_entry *old_entry)
{
return hv_unmap_interrupt(hv_build_pci_dev_id(dev).as_uint64, old_entry);
}
static void hv_teardown_msi_irq(struct pci_dev *dev, struct irq_data *irqd)
{
struct hv_interrupt_entry old_entry;
struct msi_msg msg;
u64 status;
if (!irqd->chip_data) {
pr_debug("%s: no chip data\n!", __func__);
return;
}
old_entry = *(struct hv_interrupt_entry *)irqd->chip_data;
entry_to_msi_msg(&old_entry, &msg);
kfree(irqd->chip_data);
irqd->chip_data = NULL;
status = hv_unmap_msi_interrupt(dev, &old_entry);
if (status != HV_STATUS_SUCCESS)
pr_err("%s: hypercall failed, status %lld\n", __func__, status);
}
static void hv_msi_free_irq(struct irq_domain *domain,
struct msi_domain_info *info, unsigned int virq)
{
struct irq_data *irqd = irq_get_irq_data(virq);
struct msi_desc *desc;
if (!irqd)
return;
desc = irq_data_get_msi_desc(irqd);
if (!desc || !desc->irq || WARN_ON_ONCE(!dev_is_pci(desc->dev)))
return;
hv_teardown_msi_irq(to_pci_dev(desc->dev), irqd);
}
/*
* IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
* which implement the MSI or MSI-X Capability Structure.
*/
static struct irq_chip hv_pci_msi_controller = {
.name = "HV-PCI-MSI",
.irq_unmask = pci_msi_unmask_irq,
.irq_mask = pci_msi_mask_irq,
.irq_ack = irq_chip_ack_parent,
.irq_retrigger = irq_chip_retrigger_hierarchy,
.irq_compose_msi_msg = hv_irq_compose_msi_msg,
.irq_set_affinity = msi_domain_set_affinity,
.flags = IRQCHIP_SKIP_SET_WAKE,
};
static struct msi_domain_ops pci_msi_domain_ops = {
.msi_free = hv_msi_free_irq,
.msi_prepare = pci_msi_prepare,
};
static struct msi_domain_info hv_pci_msi_domain_info = {
.flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
MSI_FLAG_PCI_MSIX,
.ops = &pci_msi_domain_ops,
.chip = &hv_pci_msi_controller,
.handler = handle_edge_irq,
.handler_name = "edge",
};
struct irq_domain * __init hv_create_pci_msi_domain(void)
{
struct irq_domain *d = NULL;
struct fwnode_handle *fn;
fn = irq_domain_alloc_named_fwnode("HV-PCI-MSI");
if (fn)
d = pci_msi_create_irq_domain(fn, &hv_pci_msi_domain_info, x86_vector_domain);
/* No point in going further if we can't get an irq domain */
BUG_ON(!d);
return d;
}
#endif /* CONFIG_PCI_MSI */
int hv_unmap_ioapic_interrupt(int ioapic_id, struct hv_interrupt_entry *entry)
{
union hv_device_id device_id;
device_id.as_uint64 = 0;
device_id.device_type = HV_DEVICE_TYPE_IOAPIC;
device_id.ioapic.ioapic_id = (u8)ioapic_id;
return hv_unmap_interrupt(device_id.as_uint64, entry);
}
EXPORT_SYMBOL_GPL(hv_unmap_ioapic_interrupt);
int hv_map_ioapic_interrupt(int ioapic_id, bool level, int cpu, int vector,
struct hv_interrupt_entry *entry)
{
union hv_device_id device_id;
device_id.as_uint64 = 0;
device_id.device_type = HV_DEVICE_TYPE_IOAPIC;
device_id.ioapic.ioapic_id = (u8)ioapic_id;
return hv_map_interrupt(device_id, level, cpu, vector, entry);
}
EXPORT_SYMBOL_GPL(hv_map_ioapic_interrupt);