blob: 5d33ce24fe09fac6d8a1550cf8bc6b6d1a8880bc [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0-only */
/* Copyright(c) 2020-2021 Intel Corporation. */
#ifndef __CXL_MEM_H__
#define __CXL_MEM_H__
#include <uapi/linux/cxl_mem.h>
#include <linux/cdev.h>
#include "cxl.h"
/* CXL 2.0 8.2.8.5.1.1 Memory Device Status Register */
#define CXLMDEV_STATUS_OFFSET 0x0
#define CXLMDEV_DEV_FATAL BIT(0)
#define CXLMDEV_FW_HALT BIT(1)
#define CXLMDEV_STATUS_MEDIA_STATUS_MASK GENMASK(3, 2)
#define CXLMDEV_MS_NOT_READY 0
#define CXLMDEV_MS_READY 1
#define CXLMDEV_MS_ERROR 2
#define CXLMDEV_MS_DISABLED 3
#define CXLMDEV_READY(status) \
(FIELD_GET(CXLMDEV_STATUS_MEDIA_STATUS_MASK, status) == \
CXLMDEV_MS_READY)
#define CXLMDEV_MBOX_IF_READY BIT(4)
#define CXLMDEV_RESET_NEEDED_MASK GENMASK(7, 5)
#define CXLMDEV_RESET_NEEDED_NOT 0
#define CXLMDEV_RESET_NEEDED_COLD 1
#define CXLMDEV_RESET_NEEDED_WARM 2
#define CXLMDEV_RESET_NEEDED_HOT 3
#define CXLMDEV_RESET_NEEDED_CXL 4
#define CXLMDEV_RESET_NEEDED(status) \
(FIELD_GET(CXLMDEV_RESET_NEEDED_MASK, status) != \
CXLMDEV_RESET_NEEDED_NOT)
/**
* struct cxl_memdev - CXL bus object representing a Type-3 Memory Device
* @dev: driver core device object
* @cdev: char dev core object for ioctl operations
* @cxlds: The device state backing this device
* @detach_work: active memdev lost a port in its ancestry
* @id: id number of this memdev instance.
*/
struct cxl_memdev {
struct device dev;
struct cdev cdev;
struct cxl_dev_state *cxlds;
struct work_struct detach_work;
int id;
};
static inline struct cxl_memdev *to_cxl_memdev(struct device *dev)
{
return container_of(dev, struct cxl_memdev, dev);
}
bool is_cxl_memdev(struct device *dev);
static inline bool is_cxl_endpoint(struct cxl_port *port)
{
return is_cxl_memdev(port->uport);
}
struct cxl_memdev *devm_cxl_add_memdev(struct cxl_dev_state *cxlds);
/**
* struct cxl_mbox_cmd - A command to be submitted to hardware.
* @opcode: (input) The command set and command submitted to hardware.
* @payload_in: (input) Pointer to the input payload.
* @payload_out: (output) Pointer to the output payload. Must be allocated by
* the caller.
* @size_in: (input) Number of bytes to load from @payload_in.
* @size_out: (input) Max number of bytes loaded into @payload_out.
* (output) Number of bytes generated by the device. For fixed size
* outputs commands this is always expected to be deterministic. For
* variable sized output commands, it tells the exact number of bytes
* written.
* @return_code: (output) Error code returned from hardware.
*
* This is the primary mechanism used to send commands to the hardware.
* All the fields except @payload_* correspond exactly to the fields described in
* Command Register section of the CXL 2.0 8.2.8.4.5. @payload_in and
* @payload_out are written to, and read from the Command Payload Registers
* defined in CXL 2.0 8.2.8.4.8.
*/
struct cxl_mbox_cmd {
u16 opcode;
void *payload_in;
void *payload_out;
size_t size_in;
size_t size_out;
u16 return_code;
#define CXL_MBOX_SUCCESS 0
};
/*
* CXL 2.0 - Memory capacity multiplier
* See Section 8.2.9.5
*
* Volatile, Persistent, and Partition capacities are specified to be in
* multiples of 256MB - define a multiplier to convert to/from bytes.
*/
#define CXL_CAPACITY_MULTIPLIER SZ_256M
/**
* struct cxl_endpoint_dvsec_info - Cached DVSEC info
* @mem_enabled: cached value of mem_enabled in the DVSEC, PCIE_DEVICE
* @ranges: Number of active HDM ranges this device uses.
* @dvsec_range: cached attributes of the ranges in the DVSEC, PCIE_DEVICE
*/
struct cxl_endpoint_dvsec_info {
bool mem_enabled;
int ranges;
struct range dvsec_range[2];
};
/**
* struct cxl_dev_state - The driver device state
*
* cxl_dev_state represents the CXL driver/device state. It provides an
* interface to mailbox commands as well as some cached data about the device.
* Currently only memory devices are represented.
*
* @dev: The device associated with this CXL state
* @regs: Parsed register blocks
* @cxl_dvsec: Offset to the PCIe device DVSEC
* @payload_size: Size of space for payload
* (CXL 2.0 8.2.8.4.3 Mailbox Capabilities Register)
* @lsa_size: Size of Label Storage Area
* (CXL 2.0 8.2.9.5.1.1 Identify Memory Device)
* @mbox_mutex: Mutex to synchronize mailbox access.
* @firmware_version: Firmware version for the memory device.
* @enabled_cmds: Hardware commands found enabled in CEL.
* @exclusive_cmds: Commands that are kernel-internal only
* @pmem_range: Active Persistent memory capacity configuration
* @ram_range: Active Volatile memory capacity configuration
* @total_bytes: sum of all possible capacities
* @volatile_only_bytes: hard volatile capacity
* @persistent_only_bytes: hard persistent capacity
* @partition_align_bytes: alignment size for partition-able capacity
* @active_volatile_bytes: sum of hard + soft volatile
* @active_persistent_bytes: sum of hard + soft persistent
* @next_volatile_bytes: volatile capacity change pending device reset
* @next_persistent_bytes: persistent capacity change pending device reset
* @component_reg_phys: register base of component registers
* @info: Cached DVSEC information about the device.
* @serial: PCIe Device Serial Number
* @mbox_send: @dev specific transport for transmitting mailbox commands
* @wait_media_ready: @dev specific method to await media ready
*
* See section 8.2.9.5.2 Capacity Configuration and Label Storage for
* details on capacity parameters.
*/
struct cxl_dev_state {
struct device *dev;
struct cxl_regs regs;
int cxl_dvsec;
size_t payload_size;
size_t lsa_size;
struct mutex mbox_mutex; /* Protects device mailbox and firmware */
char firmware_version[0x10];
DECLARE_BITMAP(enabled_cmds, CXL_MEM_COMMAND_ID_MAX);
DECLARE_BITMAP(exclusive_cmds, CXL_MEM_COMMAND_ID_MAX);
struct range pmem_range;
struct range ram_range;
u64 total_bytes;
u64 volatile_only_bytes;
u64 persistent_only_bytes;
u64 partition_align_bytes;
u64 active_volatile_bytes;
u64 active_persistent_bytes;
u64 next_volatile_bytes;
u64 next_persistent_bytes;
resource_size_t component_reg_phys;
struct cxl_endpoint_dvsec_info info;
u64 serial;
int (*mbox_send)(struct cxl_dev_state *cxlds, struct cxl_mbox_cmd *cmd);
int (*wait_media_ready)(struct cxl_dev_state *cxlds);
};
enum cxl_opcode {
CXL_MBOX_OP_INVALID = 0x0000,
CXL_MBOX_OP_RAW = CXL_MBOX_OP_INVALID,
CXL_MBOX_OP_GET_FW_INFO = 0x0200,
CXL_MBOX_OP_ACTIVATE_FW = 0x0202,
CXL_MBOX_OP_GET_SUPPORTED_LOGS = 0x0400,
CXL_MBOX_OP_GET_LOG = 0x0401,
CXL_MBOX_OP_IDENTIFY = 0x4000,
CXL_MBOX_OP_GET_PARTITION_INFO = 0x4100,
CXL_MBOX_OP_SET_PARTITION_INFO = 0x4101,
CXL_MBOX_OP_GET_LSA = 0x4102,
CXL_MBOX_OP_SET_LSA = 0x4103,
CXL_MBOX_OP_GET_HEALTH_INFO = 0x4200,
CXL_MBOX_OP_GET_ALERT_CONFIG = 0x4201,
CXL_MBOX_OP_SET_ALERT_CONFIG = 0x4202,
CXL_MBOX_OP_GET_SHUTDOWN_STATE = 0x4203,
CXL_MBOX_OP_SET_SHUTDOWN_STATE = 0x4204,
CXL_MBOX_OP_GET_POISON = 0x4300,
CXL_MBOX_OP_INJECT_POISON = 0x4301,
CXL_MBOX_OP_CLEAR_POISON = 0x4302,
CXL_MBOX_OP_GET_SCAN_MEDIA_CAPS = 0x4303,
CXL_MBOX_OP_SCAN_MEDIA = 0x4304,
CXL_MBOX_OP_GET_SCAN_MEDIA = 0x4305,
CXL_MBOX_OP_MAX = 0x10000
};
#define DEFINE_CXL_CEL_UUID \
UUID_INIT(0xda9c0b5, 0xbf41, 0x4b78, 0x8f, 0x79, 0x96, 0xb1, 0x62, \
0x3b, 0x3f, 0x17)
#define DEFINE_CXL_VENDOR_DEBUG_UUID \
UUID_INIT(0xe1819d9, 0x11a9, 0x400c, 0x81, 0x1f, 0xd6, 0x07, 0x19, \
0x40, 0x3d, 0x86)
struct cxl_mbox_get_supported_logs {
__le16 entries;
u8 rsvd[6];
struct cxl_gsl_entry {
uuid_t uuid;
__le32 size;
} __packed entry[];
} __packed;
struct cxl_cel_entry {
__le16 opcode;
__le16 effect;
} __packed;
struct cxl_mbox_get_log {
uuid_t uuid;
__le32 offset;
__le32 length;
} __packed;
/* See CXL 2.0 Table 175 Identify Memory Device Output Payload */
struct cxl_mbox_identify {
char fw_revision[0x10];
__le64 total_capacity;
__le64 volatile_capacity;
__le64 persistent_capacity;
__le64 partition_align;
__le16 info_event_log_size;
__le16 warning_event_log_size;
__le16 failure_event_log_size;
__le16 fatal_event_log_size;
__le32 lsa_size;
u8 poison_list_max_mer[3];
__le16 inject_poison_limit;
u8 poison_caps;
u8 qos_telemetry_caps;
} __packed;
struct cxl_mbox_get_lsa {
u32 offset;
u32 length;
} __packed;
struct cxl_mbox_set_lsa {
u32 offset;
u32 reserved;
u8 data[];
} __packed;
/**
* struct cxl_mem_command - Driver representation of a memory device command
* @info: Command information as it exists for the UAPI
* @opcode: The actual bits used for the mailbox protocol
* @flags: Set of flags effecting driver behavior.
*
* * %CXL_CMD_FLAG_FORCE_ENABLE: In cases of error, commands with this flag
* will be enabled by the driver regardless of what hardware may have
* advertised.
*
* The cxl_mem_command is the driver's internal representation of commands that
* are supported by the driver. Some of these commands may not be supported by
* the hardware. The driver will use @info to validate the fields passed in by
* the user then submit the @opcode to the hardware.
*
* See struct cxl_command_info.
*/
struct cxl_mem_command {
struct cxl_command_info info;
enum cxl_opcode opcode;
u32 flags;
#define CXL_CMD_FLAG_NONE 0
#define CXL_CMD_FLAG_FORCE_ENABLE BIT(0)
};
int cxl_mbox_send_cmd(struct cxl_dev_state *cxlds, u16 opcode, void *in,
size_t in_size, void *out, size_t out_size);
int cxl_dev_state_identify(struct cxl_dev_state *cxlds);
int cxl_enumerate_cmds(struct cxl_dev_state *cxlds);
int cxl_mem_create_range_info(struct cxl_dev_state *cxlds);
struct cxl_dev_state *cxl_dev_state_create(struct device *dev);
void set_exclusive_cxl_commands(struct cxl_dev_state *cxlds, unsigned long *cmds);
void clear_exclusive_cxl_commands(struct cxl_dev_state *cxlds, unsigned long *cmds);
struct cxl_hdm {
struct cxl_component_regs regs;
unsigned int decoder_count;
unsigned int target_count;
unsigned int interleave_mask;
struct cxl_port *port;
};
#endif /* __CXL_MEM_H__ */