| // SPDX-License-Identifier: GPL-2.0+ |
| // |
| // max8997_charger.c - Power supply consumer driver for the Maxim 8997/8966 |
| // |
| // Copyright (C) 2011 Samsung Electronics |
| // MyungJoo Ham <myungjoo.ham@samsung.com> |
| |
| #include <linux/err.h> |
| #include <linux/extcon.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/platform_device.h> |
| #include <linux/power_supply.h> |
| #include <linux/mfd/max8997.h> |
| #include <linux/mfd/max8997-private.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/devm-helpers.h> |
| |
| /* MAX8997_REG_STATUS4 */ |
| #define DCINOK_SHIFT 1 |
| #define DCINOK_MASK (1 << DCINOK_SHIFT) |
| #define DETBAT_SHIFT 2 |
| #define DETBAT_MASK (1 << DETBAT_SHIFT) |
| |
| /* MAX8997_REG_MBCCTRL1 */ |
| #define TFCH_SHIFT 4 |
| #define TFCH_MASK (7 << TFCH_SHIFT) |
| |
| /* MAX8997_REG_MBCCTRL5 */ |
| #define ITOPOFF_SHIFT 0 |
| #define ITOPOFF_MASK (0xF << ITOPOFF_SHIFT) |
| |
| struct charger_data { |
| struct device *dev; |
| struct max8997_dev *iodev; |
| struct power_supply *battery; |
| struct regulator *reg; |
| struct extcon_dev *edev; |
| struct notifier_block extcon_nb; |
| struct work_struct extcon_work; |
| }; |
| |
| static enum power_supply_property max8997_battery_props[] = { |
| POWER_SUPPLY_PROP_STATUS, /* "FULL", "CHARGING" or "DISCHARGING". */ |
| POWER_SUPPLY_PROP_PRESENT, /* the presence of battery */ |
| POWER_SUPPLY_PROP_ONLINE, /* charger is active or not */ |
| }; |
| |
| /* Note that the charger control is done by a current regulator "CHARGER" */ |
| static int max8997_battery_get_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct charger_data *charger = power_supply_get_drvdata(psy); |
| struct i2c_client *i2c = charger->iodev->i2c; |
| int ret; |
| u8 reg; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_STATUS: |
| val->intval = 0; |
| ret = max8997_read_reg(i2c, MAX8997_REG_STATUS4, ®); |
| if (ret) |
| return ret; |
| if ((reg & (1 << 0)) == 0x1) |
| val->intval = POWER_SUPPLY_STATUS_FULL; |
| else if ((reg & DCINOK_MASK)) |
| val->intval = POWER_SUPPLY_STATUS_CHARGING; |
| else |
| val->intval = POWER_SUPPLY_STATUS_DISCHARGING; |
| |
| break; |
| case POWER_SUPPLY_PROP_PRESENT: |
| val->intval = 0; |
| ret = max8997_read_reg(i2c, MAX8997_REG_STATUS4, ®); |
| if (ret) |
| return ret; |
| if ((reg & DETBAT_MASK) == 0x0) |
| val->intval = 1; |
| |
| break; |
| case POWER_SUPPLY_PROP_ONLINE: |
| val->intval = 0; |
| ret = max8997_read_reg(i2c, MAX8997_REG_STATUS4, ®); |
| if (ret) |
| return ret; |
| if (reg & DCINOK_MASK) |
| val->intval = 1; |
| |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void max8997_battery_extcon_evt_worker(struct work_struct *work) |
| { |
| struct charger_data *charger = |
| container_of(work, struct charger_data, extcon_work); |
| struct extcon_dev *edev = charger->edev; |
| int current_limit; |
| |
| if (extcon_get_state(edev, EXTCON_CHG_USB_SDP) > 0) { |
| dev_dbg(charger->dev, "USB SDP charger is connected\n"); |
| current_limit = 450000; |
| } else if (extcon_get_state(edev, EXTCON_CHG_USB_DCP) > 0) { |
| dev_dbg(charger->dev, "USB DCP charger is connected\n"); |
| current_limit = 650000; |
| } else if (extcon_get_state(edev, EXTCON_CHG_USB_FAST) > 0) { |
| dev_dbg(charger->dev, "USB FAST charger is connected\n"); |
| current_limit = 650000; |
| } else if (extcon_get_state(edev, EXTCON_CHG_USB_SLOW) > 0) { |
| dev_dbg(charger->dev, "USB SLOW charger is connected\n"); |
| current_limit = 650000; |
| } else if (extcon_get_state(edev, EXTCON_CHG_USB_CDP) > 0) { |
| dev_dbg(charger->dev, "USB CDP charger is connected\n"); |
| current_limit = 650000; |
| } else { |
| dev_dbg(charger->dev, "USB charger is disconnected\n"); |
| current_limit = -1; |
| } |
| |
| if (current_limit > 0) { |
| int ret = regulator_set_current_limit(charger->reg, current_limit, current_limit); |
| |
| if (ret) { |
| dev_err(charger->dev, "failed to set current limit: %d\n", ret); |
| return; |
| } |
| ret = regulator_enable(charger->reg); |
| if (ret) |
| dev_err(charger->dev, "failed to enable regulator: %d\n", ret); |
| } else { |
| int ret = regulator_disable(charger->reg); |
| |
| if (ret) |
| dev_err(charger->dev, "failed to disable regulator: %d\n", ret); |
| } |
| } |
| |
| static int max8997_battery_extcon_evt(struct notifier_block *nb, |
| unsigned long event, void *param) |
| { |
| struct charger_data *charger = |
| container_of(nb, struct charger_data, extcon_nb); |
| schedule_work(&charger->extcon_work); |
| return NOTIFY_OK; |
| } |
| |
| static const struct power_supply_desc max8997_battery_desc = { |
| .name = "max8997_pmic", |
| .type = POWER_SUPPLY_TYPE_BATTERY, |
| .get_property = max8997_battery_get_property, |
| .properties = max8997_battery_props, |
| .num_properties = ARRAY_SIZE(max8997_battery_props), |
| }; |
| |
| static int max8997_battery_probe(struct platform_device *pdev) |
| { |
| int ret = 0; |
| struct charger_data *charger; |
| struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent); |
| struct device_node *np = pdev->dev.of_node; |
| struct i2c_client *i2c = iodev->i2c; |
| struct max8997_platform_data *pdata = iodev->pdata; |
| struct power_supply_config psy_cfg = {}; |
| |
| if (!pdata) { |
| dev_err(&pdev->dev, "No platform data supplied.\n"); |
| return -EINVAL; |
| } |
| |
| if (pdata->eoc_mA) { |
| int val = (pdata->eoc_mA - 50) / 10; |
| if (val < 0) |
| val = 0; |
| if (val > 0xf) |
| val = 0xf; |
| |
| ret = max8997_update_reg(i2c, MAX8997_REG_MBCCTRL5, |
| val << ITOPOFF_SHIFT, ITOPOFF_MASK); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Cannot use i2c bus.\n"); |
| return ret; |
| } |
| } |
| switch (pdata->timeout) { |
| case 5: |
| ret = max8997_update_reg(i2c, MAX8997_REG_MBCCTRL1, |
| 0x2 << TFCH_SHIFT, TFCH_MASK); |
| break; |
| case 6: |
| ret = max8997_update_reg(i2c, MAX8997_REG_MBCCTRL1, |
| 0x3 << TFCH_SHIFT, TFCH_MASK); |
| break; |
| case 7: |
| ret = max8997_update_reg(i2c, MAX8997_REG_MBCCTRL1, |
| 0x4 << TFCH_SHIFT, TFCH_MASK); |
| break; |
| case 0: |
| ret = max8997_update_reg(i2c, MAX8997_REG_MBCCTRL1, |
| 0x7 << TFCH_SHIFT, TFCH_MASK); |
| break; |
| default: |
| dev_err(&pdev->dev, "incorrect timeout value (%d)\n", |
| pdata->timeout); |
| return -EINVAL; |
| } |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Cannot use i2c bus.\n"); |
| return ret; |
| } |
| |
| charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL); |
| if (!charger) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, charger); |
| |
| charger->dev = &pdev->dev; |
| charger->iodev = iodev; |
| |
| psy_cfg.drv_data = charger; |
| |
| charger->battery = devm_power_supply_register(&pdev->dev, |
| &max8997_battery_desc, |
| &psy_cfg); |
| if (IS_ERR(charger->battery)) { |
| dev_err(&pdev->dev, "failed: power supply register\n"); |
| return PTR_ERR(charger->battery); |
| } |
| |
| // grab regulator from parent device's node |
| pdev->dev.of_node = iodev->dev->of_node; |
| charger->reg = devm_regulator_get_optional(&pdev->dev, "charger"); |
| pdev->dev.of_node = np; |
| if (IS_ERR(charger->reg)) { |
| if (PTR_ERR(charger->reg) == -EPROBE_DEFER) |
| return -EPROBE_DEFER; |
| dev_info(&pdev->dev, "couldn't get charger regulator\n"); |
| } |
| charger->edev = extcon_get_extcon_dev("max8997-muic"); |
| if (IS_ERR_OR_NULL(charger->edev)) { |
| if (!charger->edev) |
| return -EPROBE_DEFER; |
| dev_info(charger->dev, "couldn't get extcon device\n"); |
| } |
| |
| if (!IS_ERR(charger->reg) && !IS_ERR_OR_NULL(charger->edev)) { |
| ret = devm_work_autocancel(&pdev->dev, &charger->extcon_work, |
| max8997_battery_extcon_evt_worker); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to add extcon evt stop action: %d\n", ret); |
| return ret; |
| } |
| charger->extcon_nb.notifier_call = max8997_battery_extcon_evt; |
| ret = devm_extcon_register_notifier_all(&pdev->dev, charger->edev, |
| &charger->extcon_nb); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to register extcon notifier\n"); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static const struct platform_device_id max8997_battery_id[] = { |
| { "max8997-battery", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(platform, max8997_battery_id); |
| |
| static struct platform_driver max8997_battery_driver = { |
| .driver = { |
| .name = "max8997-battery", |
| }, |
| .probe = max8997_battery_probe, |
| .id_table = max8997_battery_id, |
| }; |
| module_platform_driver(max8997_battery_driver); |
| |
| MODULE_DESCRIPTION("MAXIM 8997/8966 battery control driver"); |
| MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>"); |
| MODULE_LICENSE("GPL"); |