| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2009 Lemote Inc. |
| * Author: Wu Zhangjin, wuzhangjin@gmail.com |
| */ |
| |
| #include <linux/irqchip.h> |
| #include <linux/logic_pio.h> |
| #include <linux/memblock.h> |
| #include <asm/bootinfo.h> |
| #include <asm/traps.h> |
| #include <asm/smp-ops.h> |
| #include <asm/cacheflush.h> |
| #include <asm/fw/fw.h> |
| |
| #include <loongson.h> |
| #include <boot_param.h> |
| |
| #define NODE_ID_OFFSET_ADDR ((void __iomem *)TO_UNCAC(0x1001041c)) |
| |
| u32 node_id_offset; |
| |
| static void __init mips_nmi_setup(void) |
| { |
| void *base; |
| extern char except_vec_nmi[]; |
| |
| base = (void *)(CAC_BASE + 0x380); |
| memcpy(base, except_vec_nmi, 0x80); |
| flush_icache_range((unsigned long)base, (unsigned long)base + 0x80); |
| } |
| |
| void ls7a_early_config(void) |
| { |
| node_id_offset = ((readl(NODE_ID_OFFSET_ADDR) >> 8) & 0x1f) + 36; |
| } |
| |
| void rs780e_early_config(void) |
| { |
| node_id_offset = 37; |
| } |
| |
| void __init prom_init(void) |
| { |
| fw_init_cmdline(); |
| prom_init_env(); |
| |
| /* init base address of io space */ |
| set_io_port_base(PCI_IOBASE); |
| |
| loongson_sysconf.early_config(); |
| |
| prom_init_numa_memory(); |
| |
| /* Hardcode to CPU UART 0 */ |
| setup_8250_early_printk_port(TO_UNCAC(LOONGSON_REG_BASE + 0x1e0), 0, 1024); |
| |
| register_smp_ops(&loongson3_smp_ops); |
| board_nmi_handler_setup = mips_nmi_setup; |
| } |
| |
| void __init prom_free_prom_memory(void) |
| { |
| } |
| |
| static __init void reserve_pio_range(void) |
| { |
| struct logic_pio_hwaddr *range; |
| |
| range = kzalloc(sizeof(*range), GFP_ATOMIC); |
| if (!range) |
| return; |
| |
| range->fwnode = &of_root->fwnode; |
| range->size = MMIO_LOWER_RESERVED; |
| range->hw_start = LOONGSON_PCIIO_BASE; |
| range->flags = LOGIC_PIO_CPU_MMIO; |
| |
| if (logic_pio_register_range(range)) { |
| pr_err("Failed to reserve PIO range for legacy ISA\n"); |
| goto free_range; |
| } |
| |
| if (WARN(range->io_start != 0, |
| "Reserved PIO range does not start from 0\n")) |
| goto unregister; |
| |
| /* |
| * i8259 would access I/O space, so mapping must be done here. |
| * Please remove it when all drivers can be managed by logic_pio. |
| */ |
| ioremap_page_range(PCI_IOBASE, PCI_IOBASE + MMIO_LOWER_RESERVED, |
| LOONGSON_PCIIO_BASE, |
| pgprot_device(PAGE_KERNEL)); |
| |
| return; |
| unregister: |
| logic_pio_unregister_range(range); |
| free_range: |
| kfree(range); |
| } |
| |
| void __init arch_init_irq(void) |
| { |
| reserve_pio_range(); |
| irqchip_init(); |
| } |