| /* |
| * Copyright 2019 Advanced Micro Devices, Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| */ |
| |
| #include "amdgpu_ras_eeprom.h" |
| #include "amdgpu.h" |
| #include "amdgpu_ras.h" |
| #include <linux/bits.h> |
| #include "smu_v11_0_i2c.h" |
| |
| #define EEPROM_I2C_TARGET_ADDR_ARCTURUS 0xA8 |
| #define EEPROM_I2C_TARGET_ADDR_VEGA20 0xA0 |
| |
| /* |
| * The 2 macros bellow represent the actual size in bytes that |
| * those entities occupy in the EEPROM memory. |
| * EEPROM_TABLE_RECORD_SIZE is different than sizeof(eeprom_table_record) which |
| * uses uint64 to store 6b fields such as retired_page. |
| */ |
| #define EEPROM_TABLE_HEADER_SIZE 20 |
| #define EEPROM_TABLE_RECORD_SIZE 24 |
| |
| #define EEPROM_ADDRESS_SIZE 0x2 |
| |
| /* Table hdr is 'AMDR' */ |
| #define EEPROM_TABLE_HDR_VAL 0x414d4452 |
| #define EEPROM_TABLE_VER 0x00010000 |
| |
| /* Assume 2 Mbit size */ |
| #define EEPROM_SIZE_BYTES 256000 |
| #define EEPROM_PAGE__SIZE_BYTES 256 |
| #define EEPROM_HDR_START 0 |
| #define EEPROM_RECORD_START (EEPROM_HDR_START + EEPROM_TABLE_HEADER_SIZE) |
| #define EEPROM_MAX_RECORD_NUM ((EEPROM_SIZE_BYTES - EEPROM_TABLE_HEADER_SIZE) / EEPROM_TABLE_RECORD_SIZE) |
| #define EEPROM_ADDR_MSB_MASK GENMASK(17, 8) |
| |
| #define to_amdgpu_device(x) (container_of(x, struct amdgpu_ras, eeprom_control))->adev |
| |
| static void __encode_table_header_to_buff(struct amdgpu_ras_eeprom_table_header *hdr, |
| unsigned char *buff) |
| { |
| uint32_t *pp = (uint32_t *) buff; |
| |
| pp[0] = cpu_to_le32(hdr->header); |
| pp[1] = cpu_to_le32(hdr->version); |
| pp[2] = cpu_to_le32(hdr->first_rec_offset); |
| pp[3] = cpu_to_le32(hdr->tbl_size); |
| pp[4] = cpu_to_le32(hdr->checksum); |
| } |
| |
| static void __decode_table_header_from_buff(struct amdgpu_ras_eeprom_table_header *hdr, |
| unsigned char *buff) |
| { |
| uint32_t *pp = (uint32_t *)buff; |
| |
| hdr->header = le32_to_cpu(pp[0]); |
| hdr->version = le32_to_cpu(pp[1]); |
| hdr->first_rec_offset = le32_to_cpu(pp[2]); |
| hdr->tbl_size = le32_to_cpu(pp[3]); |
| hdr->checksum = le32_to_cpu(pp[4]); |
| } |
| |
| static int __update_table_header(struct amdgpu_ras_eeprom_control *control, |
| unsigned char *buff) |
| { |
| int ret = 0; |
| struct i2c_msg msg = { |
| .addr = 0, |
| .flags = 0, |
| .len = EEPROM_ADDRESS_SIZE + EEPROM_TABLE_HEADER_SIZE, |
| .buf = buff, |
| }; |
| |
| |
| *(uint16_t *)buff = EEPROM_HDR_START; |
| __encode_table_header_to_buff(&control->tbl_hdr, buff + EEPROM_ADDRESS_SIZE); |
| |
| msg.addr = control->i2c_address; |
| |
| ret = i2c_transfer(&control->eeprom_accessor, &msg, 1); |
| if (ret < 1) |
| DRM_ERROR("Failed to write EEPROM table header, ret:%d", ret); |
| |
| return ret; |
| } |
| |
| |
| |
| static uint32_t __calc_hdr_byte_sum(struct amdgpu_ras_eeprom_control *control) |
| { |
| int i; |
| uint32_t tbl_sum = 0; |
| |
| /* Header checksum, skip checksum field in the calculation */ |
| for (i = 0; i < sizeof(control->tbl_hdr) - sizeof(control->tbl_hdr.checksum); i++) |
| tbl_sum += *(((unsigned char *)&control->tbl_hdr) + i); |
| |
| return tbl_sum; |
| } |
| |
| static uint32_t __calc_recs_byte_sum(struct eeprom_table_record *records, |
| int num) |
| { |
| int i, j; |
| uint32_t tbl_sum = 0; |
| |
| /* Records checksum */ |
| for (i = 0; i < num; i++) { |
| struct eeprom_table_record *record = &records[i]; |
| |
| for (j = 0; j < sizeof(*record); j++) { |
| tbl_sum += *(((unsigned char *)record) + j); |
| } |
| } |
| |
| return tbl_sum; |
| } |
| |
| static inline uint32_t __calc_tbl_byte_sum(struct amdgpu_ras_eeprom_control *control, |
| struct eeprom_table_record *records, int num) |
| { |
| return __calc_hdr_byte_sum(control) + __calc_recs_byte_sum(records, num); |
| } |
| |
| /* Checksum = 256 -((sum of all table entries) mod 256) */ |
| static void __update_tbl_checksum(struct amdgpu_ras_eeprom_control *control, |
| struct eeprom_table_record *records, int num, |
| uint32_t old_hdr_byte_sum) |
| { |
| /* |
| * This will update the table sum with new records. |
| * |
| * TODO: What happens when the EEPROM table is to be wrapped around |
| * and old records from start will get overridden. |
| */ |
| |
| /* need to recalculate updated header byte sum */ |
| control->tbl_byte_sum -= old_hdr_byte_sum; |
| control->tbl_byte_sum += __calc_tbl_byte_sum(control, records, num); |
| |
| control->tbl_hdr.checksum = 256 - (control->tbl_byte_sum % 256); |
| } |
| |
| /* table sum mod 256 + checksum must equals 256 */ |
| static bool __validate_tbl_checksum(struct amdgpu_ras_eeprom_control *control, |
| struct eeprom_table_record *records, int num) |
| { |
| control->tbl_byte_sum = __calc_tbl_byte_sum(control, records, num); |
| |
| if (control->tbl_hdr.checksum + (control->tbl_byte_sum % 256) != 256) { |
| DRM_WARN("Checksum mismatch, checksum: %u ", control->tbl_hdr.checksum); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| int amdgpu_ras_eeprom_reset_table(struct amdgpu_ras_eeprom_control *control) |
| { |
| unsigned char buff[EEPROM_ADDRESS_SIZE + EEPROM_TABLE_HEADER_SIZE] = { 0 }; |
| struct amdgpu_ras_eeprom_table_header *hdr = &control->tbl_hdr; |
| int ret = 0; |
| |
| mutex_lock(&control->tbl_mutex); |
| |
| hdr->header = EEPROM_TABLE_HDR_VAL; |
| hdr->version = EEPROM_TABLE_VER; |
| hdr->first_rec_offset = EEPROM_RECORD_START; |
| hdr->tbl_size = EEPROM_TABLE_HEADER_SIZE; |
| |
| control->tbl_byte_sum = 0; |
| __update_tbl_checksum(control, NULL, 0, 0); |
| control->next_addr = EEPROM_RECORD_START; |
| |
| ret = __update_table_header(control, buff); |
| |
| mutex_unlock(&control->tbl_mutex); |
| |
| return ret; |
| |
| } |
| |
| int amdgpu_ras_eeprom_init(struct amdgpu_ras_eeprom_control *control) |
| { |
| int ret = 0; |
| struct amdgpu_device *adev = to_amdgpu_device(control); |
| unsigned char buff[EEPROM_ADDRESS_SIZE + EEPROM_TABLE_HEADER_SIZE] = { 0 }; |
| struct amdgpu_ras_eeprom_table_header *hdr = &control->tbl_hdr; |
| struct i2c_msg msg = { |
| .addr = 0, |
| .flags = I2C_M_RD, |
| .len = EEPROM_ADDRESS_SIZE + EEPROM_TABLE_HEADER_SIZE, |
| .buf = buff, |
| }; |
| |
| mutex_init(&control->tbl_mutex); |
| |
| switch (adev->asic_type) { |
| case CHIP_VEGA20: |
| control->i2c_address = EEPROM_I2C_TARGET_ADDR_VEGA20; |
| ret = smu_v11_0_i2c_eeprom_control_init(&control->eeprom_accessor); |
| break; |
| |
| case CHIP_ARCTURUS: |
| control->i2c_address = EEPROM_I2C_TARGET_ADDR_ARCTURUS; |
| ret = smu_i2c_eeprom_init(&adev->smu, &control->eeprom_accessor); |
| break; |
| |
| default: |
| return 0; |
| } |
| |
| if (ret) { |
| DRM_ERROR("Failed to init I2C controller, ret:%d", ret); |
| return ret; |
| } |
| |
| msg.addr = control->i2c_address; |
| |
| /* Read/Create table header from EEPROM address 0 */ |
| ret = i2c_transfer(&control->eeprom_accessor, &msg, 1); |
| if (ret < 1) { |
| DRM_ERROR("Failed to read EEPROM table header, ret:%d", ret); |
| return ret; |
| } |
| |
| __decode_table_header_from_buff(hdr, &buff[2]); |
| |
| if (hdr->header == EEPROM_TABLE_HDR_VAL) { |
| control->num_recs = (hdr->tbl_size - EEPROM_TABLE_HEADER_SIZE) / |
| EEPROM_TABLE_RECORD_SIZE; |
| control->tbl_byte_sum = __calc_hdr_byte_sum(control); |
| control->next_addr = EEPROM_RECORD_START; |
| |
| DRM_DEBUG_DRIVER("Found existing EEPROM table with %d records", |
| control->num_recs); |
| |
| } else { |
| DRM_INFO("Creating new EEPROM table"); |
| |
| ret = amdgpu_ras_eeprom_reset_table(control); |
| } |
| |
| return ret == 1 ? 0 : -EIO; |
| } |
| |
| void amdgpu_ras_eeprom_fini(struct amdgpu_ras_eeprom_control *control) |
| { |
| struct amdgpu_device *adev = to_amdgpu_device(control); |
| |
| switch (adev->asic_type) { |
| case CHIP_VEGA20: |
| smu_v11_0_i2c_eeprom_control_fini(&control->eeprom_accessor); |
| break; |
| case CHIP_ARCTURUS: |
| smu_i2c_eeprom_fini(&adev->smu, &control->eeprom_accessor); |
| break; |
| |
| default: |
| return; |
| } |
| } |
| |
| static void __encode_table_record_to_buff(struct amdgpu_ras_eeprom_control *control, |
| struct eeprom_table_record *record, |
| unsigned char *buff) |
| { |
| __le64 tmp = 0; |
| int i = 0; |
| |
| /* Next are all record fields according to EEPROM page spec in LE foramt */ |
| buff[i++] = record->err_type; |
| |
| buff[i++] = record->bank; |
| |
| tmp = cpu_to_le64(record->ts); |
| memcpy(buff + i, &tmp, 8); |
| i += 8; |
| |
| tmp = cpu_to_le64((record->offset & 0xffffffffffff)); |
| memcpy(buff + i, &tmp, 6); |
| i += 6; |
| |
| buff[i++] = record->mem_channel; |
| buff[i++] = record->mcumc_id; |
| |
| tmp = cpu_to_le64((record->retired_page & 0xffffffffffff)); |
| memcpy(buff + i, &tmp, 6); |
| } |
| |
| static void __decode_table_record_from_buff(struct amdgpu_ras_eeprom_control *control, |
| struct eeprom_table_record *record, |
| unsigned char *buff) |
| { |
| __le64 tmp = 0; |
| int i = 0; |
| |
| /* Next are all record fields according to EEPROM page spec in LE foramt */ |
| record->err_type = buff[i++]; |
| |
| record->bank = buff[i++]; |
| |
| memcpy(&tmp, buff + i, 8); |
| record->ts = le64_to_cpu(tmp); |
| i += 8; |
| |
| memcpy(&tmp, buff + i, 6); |
| record->offset = (le64_to_cpu(tmp) & 0xffffffffffff); |
| i += 6; |
| |
| record->mem_channel = buff[i++]; |
| record->mcumc_id = buff[i++]; |
| |
| memcpy(&tmp, buff + i, 6); |
| record->retired_page = (le64_to_cpu(tmp) & 0xffffffffffff); |
| } |
| |
| /* |
| * When reaching end of EEPROM memory jump back to 0 record address |
| * When next record access will go beyond EEPROM page boundary modify bits A17/A8 |
| * in I2C selector to go to next page |
| */ |
| static uint32_t __correct_eeprom_dest_address(uint32_t curr_address) |
| { |
| uint32_t next_address = curr_address + EEPROM_TABLE_RECORD_SIZE; |
| |
| /* When all EEPROM memory used jump back to 0 address */ |
| if (next_address > EEPROM_SIZE_BYTES) { |
| DRM_INFO("Reached end of EEPROM memory, jumping to 0 " |
| "and overriding old record"); |
| return EEPROM_RECORD_START; |
| } |
| |
| /* |
| * To check if we overflow page boundary compare next address with |
| * current and see if bits 17/8 of the EEPROM address will change |
| * If they do start from the next 256b page |
| * |
| * https://www.st.com/resource/en/datasheet/m24m02-dr.pdf sec. 5.1.2 |
| */ |
| if ((curr_address & EEPROM_ADDR_MSB_MASK) != (next_address & EEPROM_ADDR_MSB_MASK)) { |
| DRM_DEBUG_DRIVER("Reached end of EEPROM memory page, jumping to next: %lx", |
| (next_address & EEPROM_ADDR_MSB_MASK)); |
| |
| return (next_address & EEPROM_ADDR_MSB_MASK); |
| } |
| |
| return curr_address; |
| } |
| |
| int amdgpu_ras_eeprom_process_recods(struct amdgpu_ras_eeprom_control *control, |
| struct eeprom_table_record *records, |
| bool write, |
| int num) |
| { |
| int i, ret = 0; |
| struct i2c_msg *msgs, *msg; |
| unsigned char *buffs, *buff; |
| struct eeprom_table_record *record; |
| struct amdgpu_device *adev = to_amdgpu_device(control); |
| |
| if (adev->asic_type != CHIP_VEGA20 && adev->asic_type != CHIP_ARCTURUS) |
| return 0; |
| |
| buffs = kcalloc(num, EEPROM_ADDRESS_SIZE + EEPROM_TABLE_RECORD_SIZE, |
| GFP_KERNEL); |
| if (!buffs) |
| return -ENOMEM; |
| |
| mutex_lock(&control->tbl_mutex); |
| |
| msgs = kcalloc(num, sizeof(*msgs), GFP_KERNEL); |
| if (!msgs) { |
| ret = -ENOMEM; |
| goto free_buff; |
| } |
| |
| /* In case of overflow just start from beginning to not lose newest records */ |
| if (write && (control->next_addr + EEPROM_TABLE_RECORD_SIZE * num > EEPROM_SIZE_BYTES)) |
| control->next_addr = EEPROM_RECORD_START; |
| |
| |
| /* |
| * TODO Currently makes EEPROM writes for each record, this creates |
| * internal fragmentation. Optimized the code to do full page write of |
| * 256b |
| */ |
| for (i = 0; i < num; i++) { |
| buff = &buffs[i * (EEPROM_ADDRESS_SIZE + EEPROM_TABLE_RECORD_SIZE)]; |
| record = &records[i]; |
| msg = &msgs[i]; |
| |
| control->next_addr = __correct_eeprom_dest_address(control->next_addr); |
| |
| /* |
| * Update bits 16,17 of EEPROM address in I2C address by setting them |
| * to bits 1,2 of Device address byte |
| */ |
| msg->addr = control->i2c_address | |
| ((control->next_addr & EEPROM_ADDR_MSB_MASK) >> 15); |
| msg->flags = write ? 0 : I2C_M_RD; |
| msg->len = EEPROM_ADDRESS_SIZE + EEPROM_TABLE_RECORD_SIZE; |
| msg->buf = buff; |
| |
| /* Insert the EEPROM dest addess, bits 0-15 */ |
| buff[0] = ((control->next_addr >> 8) & 0xff); |
| buff[1] = (control->next_addr & 0xff); |
| |
| /* EEPROM table content is stored in LE format */ |
| if (write) |
| __encode_table_record_to_buff(control, record, buff + EEPROM_ADDRESS_SIZE); |
| |
| /* |
| * The destination EEPROM address might need to be corrected to account |
| * for page or entire memory wrapping |
| */ |
| control->next_addr += EEPROM_TABLE_RECORD_SIZE; |
| } |
| |
| ret = i2c_transfer(&control->eeprom_accessor, msgs, num); |
| if (ret < 1) { |
| DRM_ERROR("Failed to process EEPROM table records, ret:%d", ret); |
| |
| /* TODO Restore prev next EEPROM address ? */ |
| goto free_msgs; |
| } |
| |
| |
| if (!write) { |
| for (i = 0; i < num; i++) { |
| buff = &buffs[i*(EEPROM_ADDRESS_SIZE + EEPROM_TABLE_RECORD_SIZE)]; |
| record = &records[i]; |
| |
| __decode_table_record_from_buff(control, record, buff + EEPROM_ADDRESS_SIZE); |
| } |
| } |
| |
| if (write) { |
| uint32_t old_hdr_byte_sum = __calc_hdr_byte_sum(control); |
| |
| /* |
| * Update table header with size and CRC and account for table |
| * wrap around where the assumption is that we treat it as empty |
| * table |
| * |
| * TODO - Check the assumption is correct |
| */ |
| control->num_recs += num; |
| control->num_recs %= EEPROM_MAX_RECORD_NUM; |
| control->tbl_hdr.tbl_size += EEPROM_TABLE_RECORD_SIZE * num; |
| if (control->tbl_hdr.tbl_size > EEPROM_SIZE_BYTES) |
| control->tbl_hdr.tbl_size = EEPROM_TABLE_HEADER_SIZE + |
| control->num_recs * EEPROM_TABLE_RECORD_SIZE; |
| |
| __update_tbl_checksum(control, records, num, old_hdr_byte_sum); |
| |
| __update_table_header(control, buffs); |
| } else if (!__validate_tbl_checksum(control, records, num)) { |
| DRM_WARN("EEPROM Table checksum mismatch!"); |
| /* TODO Uncomment when EEPROM read/write is relliable */ |
| /* ret = -EIO; */ |
| } |
| |
| free_msgs: |
| kfree(msgs); |
| |
| free_buff: |
| kfree(buffs); |
| |
| mutex_unlock(&control->tbl_mutex); |
| |
| return ret == num ? 0 : -EIO; |
| } |
| |
| /* Used for testing if bugs encountered */ |
| #if 0 |
| void amdgpu_ras_eeprom_test(struct amdgpu_ras_eeprom_control *control) |
| { |
| int i; |
| struct eeprom_table_record *recs = kcalloc(1, sizeof(*recs), GFP_KERNEL); |
| |
| if (!recs) |
| return; |
| |
| for (i = 0; i < 1 ; i++) { |
| recs[i].address = 0xdeadbeef; |
| recs[i].retired_page = i; |
| } |
| |
| if (!amdgpu_ras_eeprom_process_recods(control, recs, true, 1)) { |
| |
| memset(recs, 0, sizeof(*recs) * 1); |
| |
| control->next_addr = EEPROM_RECORD_START; |
| |
| if (!amdgpu_ras_eeprom_process_recods(control, recs, false, 1)) { |
| for (i = 0; i < 1; i++) |
| DRM_INFO("rec.address :0x%llx, rec.retired_page :%llu", |
| recs[i].address, recs[i].retired_page); |
| } else |
| DRM_ERROR("Failed in reading from table"); |
| |
| } else |
| DRM_ERROR("Failed in writing to table"); |
| } |
| #endif |