arch/mips/mm/sc-mips.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2006 Chris Dearman (chris@mips.com),
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/mm.h>

 #include <asm/cpu-type.h>
 #include <asm/mipsregs.h>
 #include <asm/bcache.h>
 #include <asm/cacheops.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/mmu_context.h>
 #include <asm/r4kcache.h>
 #include <asm/mips-cps.h>
 #include <asm/bootinfo.h>

 /*
  * MIPS32/MIPS64 L2 cache handling
  */

 /*
  * Writeback and invalidate the secondary cache before DMA.
  */
 static void mips_sc_wback_inv(unsigned long addr, unsigned long size)
 {
 	blast_scache_range(addr, addr + size);
 }

 /*
  * Invalidate the secondary cache before DMA.
  */
 static void mips_sc_inv(unsigned long addr, unsigned long size)
 {
 	unsigned long lsize = cpu_scache_line_size();
 	unsigned long almask = ~(lsize - 1);

 	cache_op(Hit_Writeback_Inv_SD, addr & almask);
 	cache_op(Hit_Writeback_Inv_SD, (addr + size - 1) & almask);
 	blast_inv_scache_range(addr, addr + size);
 }

 static void mips_sc_enable(void)
 {
 	/* L2 cache is permanently enabled */
 }

 static void mips_sc_disable(void)
 {
 	/* L2 cache is permanently enabled */
 }

 static void mips_sc_prefetch_enable(void)
 {
 	unsigned long pftctl;

 	if (mips_cm_revision() < CM_REV_CM2_5)
 		return;

 	/*
 	 * If there is one or more L2 prefetch unit present then enable
 	 * prefetching for both code & data, for all ports.
 	 */
 	pftctl = read_gcr_l2_pft_control();
 	if (pftctl & CM_GCR_L2_PFT_CONTROL_NPFT) {
 		pftctl &= ~CM_GCR_L2_PFT_CONTROL_PAGEMASK;
 		pftctl |= PAGE_MASK & CM_GCR_L2_PFT_CONTROL_PAGEMASK;
 		pftctl |= CM_GCR_L2_PFT_CONTROL_PFTEN;
 		write_gcr_l2_pft_control(pftctl);

 		set_gcr_l2_pft_control_b(CM_GCR_L2_PFT_CONTROL_B_PORTID |
 					 CM_GCR_L2_PFT_CONTROL_B_CEN);
 	}
 }

 static void mips_sc_prefetch_disable(void)
 {
 	if (mips_cm_revision() < CM_REV_CM2_5)
 		return;

 	clear_gcr_l2_pft_control(CM_GCR_L2_PFT_CONTROL_PFTEN);
 	clear_gcr_l2_pft_control_b(CM_GCR_L2_PFT_CONTROL_B_PORTID |
 				   CM_GCR_L2_PFT_CONTROL_B_CEN);
 }

 static bool mips_sc_prefetch_is_enabled(void)
 {
 	unsigned long pftctl;

 	if (mips_cm_revision() < CM_REV_CM2_5)
 		return false;

 	pftctl = read_gcr_l2_pft_control();
 	if (!(pftctl & CM_GCR_L2_PFT_CONTROL_NPFT))
 		return false;
 	return !!(pftctl & CM_GCR_L2_PFT_CONTROL_PFTEN);
 }

 static struct bcache_ops mips_sc_ops = {
 	.bc_enable = mips_sc_enable,
 	.bc_disable = mips_sc_disable,
 	.bc_wback_inv = mips_sc_wback_inv,
 	.bc_inv = mips_sc_inv,
 	.bc_prefetch_enable = mips_sc_prefetch_enable,
 	.bc_prefetch_disable = mips_sc_prefetch_disable,
 	.bc_prefetch_is_enabled = mips_sc_prefetch_is_enabled,
 };

 /*
  * Check if the L2 cache controller is activated on a particular platform.
  * MTI's L2 controller and the L2 cache controller of Broadcom's BMIPS
  * cores both use c0_config2's bit 12 as "L2 Bypass" bit, that is the
  * cache being disabled.  However there is no guarantee for this to be
  * true on all platforms.  In an act of stupidity the spec defined bits
  * 12..15 as implementation defined so below function will eventually have
  * to be replaced by a platform specific probe.
  */
 static inline int mips_sc_is_activated(struct cpuinfo_mips *c)
 {
 	unsigned int config2 = read_c0_config2();
 	unsigned int tmp;

 	/* Check the bypass bit (L2B) */
 	switch (current_cpu_type()) {
 	case CPU_34K:
 	case CPU_74K:
 	case CPU_1004K:
 	case CPU_1074K:
 	case CPU_INTERAPTIV:
 	case CPU_PROAPTIV:
 	case CPU_P5600:
 	case CPU_BMIPS5000:
 	case CPU_QEMU_GENERIC:
 	case CPU_P6600:
 		if (config2 & (1 << 12))
 			return 0;
 	}

 	tmp = (config2 >> 4) & 0x0f;
 	if (0 < tmp && tmp <= 7)
 		c->scache.linesz = 2 << tmp;
 	else
 		return 0;
 	return 1;
 }

 static int __init mips_sc_probe_cm3(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 	unsigned long cfg = read_gcr_l2_config();
 	unsigned long sets, line_sz, assoc;

 	if (cfg & CM_GCR_L2_CONFIG_BYPASS)
 		return 0;

 	sets = cfg & CM_GCR_L2_CONFIG_SET_SIZE;
 	sets >>= __ffs(CM_GCR_L2_CONFIG_SET_SIZE);
 	if (sets)
 		c->scache.sets = 64 << sets;

 	line_sz = cfg & CM_GCR_L2_CONFIG_LINE_SIZE;
 	line_sz >>= __ffs(CM_GCR_L2_CONFIG_LINE_SIZE);
 	if (line_sz)
 		c->scache.linesz = 2 << line_sz;

 	assoc = cfg & CM_GCR_L2_CONFIG_ASSOC;
 	assoc >>= __ffs(CM_GCR_L2_CONFIG_ASSOC);
 	c->scache.ways = assoc + 1;
 	c->scache.waysize = c->scache.sets * c->scache.linesz;
 	c->scache.waybit = __ffs(c->scache.waysize);

 	if (c->scache.linesz) {
 		c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
 		c->options |= MIPS_CPU_INCLUSIVE_CACHES;
 		return 1;
 	}

 	return 0;
 }

 static inline int __init mips_sc_probe(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 	unsigned int config1, config2;
 	unsigned int tmp;

 	/* Mark as not present until probe completed */
 	c->scache.flags |= MIPS_CACHE_NOT_PRESENT;

 	if (mips_cm_revision() >= CM_REV_CM3)
 		return mips_sc_probe_cm3();

 	/* Ignore anything but MIPSxx processors */
 	if (!(c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 |
 			      MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R1 |
 			      MIPS_CPU_ISA_M64R2 | MIPS_CPU_ISA_M64R6)))
 		return 0;

 	/* Does this MIPS32/MIPS64 CPU have a config2 register? */
 	config1 = read_c0_config1();
 	if (!(config1 & MIPS_CONF_M))
 		return 0;

 	config2 = read_c0_config2();

 	if (!mips_sc_is_activated(c))
 		return 0;

 	tmp = (config2 >> 8) & 0x0f;
 	if (tmp <= 7)
 		c->scache.sets = 64 << tmp;
 	else
 		return 0;

 	tmp = (config2 >> 0) & 0x0f;
 	if (tmp <= 7)
 		c->scache.ways = tmp + 1;
 	else
 		return 0;

 	if (current_cpu_type() == CPU_XBURST) {
 		switch (mips_machtype) {
 		/*
 		 * According to config2 it would be 5-ways, but that is
 		 * contradicted by all documentation.
 		 */
 		case MACH_INGENIC_JZ4770:
 			c->scache.ways = 4;
 			break;

 		/*
 		 * According to config2 it would be 5-ways and 512-sets,
 		 * but that is contradicted by all documentation.
 		 */
 		case MACH_INGENIC_X1000:
 			c->scache.sets = 256;
 			c->scache.ways = 4;
 			break;
 		}
 	}

 	c->scache.waysize = c->scache.sets * c->scache.linesz;
 	c->scache.waybit = __ffs(c->scache.waysize);

 	c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;

 	return 1;
 }

 int mips_sc_init(void)
 {
 	int found = mips_sc_probe();
 	if (found) {
 		mips_sc_enable();
 		mips_sc_prefetch_enable();
 		bcops = &mips_sc_ops;
 	}
 	return found;
 }
	// SPDX-License-Identifier: GPL-2.0
	/*
	* Copyright (C) 2006 Chris Dearman (chris@mips.com),
	*/
	#include <linux/init.h>
	#include <linux/kernel.h>
	#include <linux/sched.h>
	#include <linux/mm.h>

	#include <asm/cpu-type.h>
	#include <asm/mipsregs.h>
	#include <asm/bcache.h>
	#include <asm/cacheops.h>
	#include <asm/page.h>
	#include <asm/pgtable.h>
	#include <asm/mmu_context.h>
	#include <asm/r4kcache.h>
	#include <asm/mips-cps.h>
	#include <asm/bootinfo.h>

	/*
	* MIPS32/MIPS64 L2 cache handling
	*/

	/*
	* Writeback and invalidate the secondary cache before DMA.
	*/
	static void mips_sc_wback_inv(unsigned long addr, unsigned long size)
	{
	blast_scache_range(addr, addr + size);
	}

	/*
	* Invalidate the secondary cache before DMA.
	*/
	static void mips_sc_inv(unsigned long addr, unsigned long size)
	{
	unsigned long lsize = cpu_scache_line_size();
	unsigned long almask = ~(lsize - 1);

	cache_op(Hit_Writeback_Inv_SD, addr & almask);
	cache_op(Hit_Writeback_Inv_SD, (addr + size - 1) & almask);
	blast_inv_scache_range(addr, addr + size);
	}

	static void mips_sc_enable(void)
	{
	/* L2 cache is permanently enabled */
	}

	static void mips_sc_disable(void)
	{
	/* L2 cache is permanently enabled */
	}

	static void mips_sc_prefetch_enable(void)
	{
	unsigned long pftctl;

	if (mips_cm_revision() < CM_REV_CM2_5)
	return;

	/*
	* If there is one or more L2 prefetch unit present then enable
	* prefetching for both code & data, for all ports.
	*/
	pftctl = read_gcr_l2_pft_control();
	if (pftctl & CM_GCR_L2_PFT_CONTROL_NPFT) {
	pftctl &= ~CM_GCR_L2_PFT_CONTROL_PAGEMASK;
	pftctl \|= PAGE_MASK & CM_GCR_L2_PFT_CONTROL_PAGEMASK;
	pftctl \|= CM_GCR_L2_PFT_CONTROL_PFTEN;
	write_gcr_l2_pft_control(pftctl);

	set_gcr_l2_pft_control_b(CM_GCR_L2_PFT_CONTROL_B_PORTID \|
	CM_GCR_L2_PFT_CONTROL_B_CEN);
	}
	}

	static void mips_sc_prefetch_disable(void)
	{
	if (mips_cm_revision() < CM_REV_CM2_5)
	return;

	clear_gcr_l2_pft_control(CM_GCR_L2_PFT_CONTROL_PFTEN);
	clear_gcr_l2_pft_control_b(CM_GCR_L2_PFT_CONTROL_B_PORTID \|
	CM_GCR_L2_PFT_CONTROL_B_CEN);
	}

	static bool mips_sc_prefetch_is_enabled(void)
	{
	unsigned long pftctl;

	if (mips_cm_revision() < CM_REV_CM2_5)
	return false;

	pftctl = read_gcr_l2_pft_control();
	if (!(pftctl & CM_GCR_L2_PFT_CONTROL_NPFT))
	return false;
	return !!(pftctl & CM_GCR_L2_PFT_CONTROL_PFTEN);
	}

	static struct bcache_ops mips_sc_ops = {
	.bc_enable = mips_sc_enable,
	.bc_disable = mips_sc_disable,
	.bc_wback_inv = mips_sc_wback_inv,
	.bc_inv = mips_sc_inv,
	.bc_prefetch_enable = mips_sc_prefetch_enable,
	.bc_prefetch_disable = mips_sc_prefetch_disable,
	.bc_prefetch_is_enabled = mips_sc_prefetch_is_enabled,
	};

	/*
	* Check if the L2 cache controller is activated on a particular platform.
	* MTI's L2 controller and the L2 cache controller of Broadcom's BMIPS
	* cores both use c0_config2's bit 12 as "L2 Bypass" bit, that is the
	* cache being disabled. However there is no guarantee for this to be
	* true on all platforms. In an act of stupidity the spec defined bits
	* 12..15 as implementation defined so below function will eventually have
	* to be replaced by a platform specific probe.
	*/
	static inline int mips_sc_is_activated(struct cpuinfo_mips *c)
	{
	unsigned int config2 = read_c0_config2();
	unsigned int tmp;

	/* Check the bypass bit (L2B) */
	switch (current_cpu_type()) {
	case CPU_34K:
	case CPU_74K:
	case CPU_1004K:
	case CPU_1074K:
	case CPU_INTERAPTIV:
	case CPU_PROAPTIV:
	case CPU_P5600:
	case CPU_BMIPS5000:
	case CPU_QEMU_GENERIC:
	case CPU_P6600:
	if (config2 & (1 << 12))
	return 0;
	}

	tmp = (config2 >> 4) & 0x0f;
	if (0 < tmp && tmp <= 7)
	c->scache.linesz = 2 << tmp;
	else
	return 0;
	return 1;
	}

	static int __init mips_sc_probe_cm3(void)
	{
	struct cpuinfo_mips *c = &current_cpu_data;
	unsigned long cfg = read_gcr_l2_config();
	unsigned long sets, line_sz, assoc;

	if (cfg & CM_GCR_L2_CONFIG_BYPASS)
	return 0;

	sets = cfg & CM_GCR_L2_CONFIG_SET_SIZE;
	sets >>= __ffs(CM_GCR_L2_CONFIG_SET_SIZE);
	if (sets)
	c->scache.sets = 64 << sets;

	line_sz = cfg & CM_GCR_L2_CONFIG_LINE_SIZE;
	line_sz >>= __ffs(CM_GCR_L2_CONFIG_LINE_SIZE);
	if (line_sz)
	c->scache.linesz = 2 << line_sz;

	assoc = cfg & CM_GCR_L2_CONFIG_ASSOC;
	assoc >>= __ffs(CM_GCR_L2_CONFIG_ASSOC);
	c->scache.ways = assoc + 1;
	c->scache.waysize = c->scache.sets * c->scache.linesz;
	c->scache.waybit = __ffs(c->scache.waysize);

	if (c->scache.linesz) {
	c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
	c->options \|= MIPS_CPU_INCLUSIVE_CACHES;
	return 1;
	}

	return 0;
	}

	static inline int __init mips_sc_probe(void)
	{
	struct cpuinfo_mips *c = &current_cpu_data;
	unsigned int config1, config2;
	unsigned int tmp;

	/* Mark as not present until probe completed */
	c->scache.flags \|= MIPS_CACHE_NOT_PRESENT;

	if (mips_cm_revision() >= CM_REV_CM3)
	return mips_sc_probe_cm3();

	/* Ignore anything but MIPSxx processors */
	if (!(c->isa_level & (MIPS_CPU_ISA_M32R1 \| MIPS_CPU_ISA_M32R2 \|
	MIPS_CPU_ISA_M32R6 \| MIPS_CPU_ISA_M64R1 \|
	MIPS_CPU_ISA_M64R2 \| MIPS_CPU_ISA_M64R6)))
	return 0;

	/* Does this MIPS32/MIPS64 CPU have a config2 register? */
	config1 = read_c0_config1();
	if (!(config1 & MIPS_CONF_M))
	return 0;

	config2 = read_c0_config2();

	if (!mips_sc_is_activated(c))
	return 0;

	tmp = (config2 >> 8) & 0x0f;
	if (tmp <= 7)
	c->scache.sets = 64 << tmp;
	else
	return 0;

	tmp = (config2 >> 0) & 0x0f;
	if (tmp <= 7)
	c->scache.ways = tmp + 1;
	else
	return 0;

	if (current_cpu_type() == CPU_XBURST) {
	switch (mips_machtype) {
	/*
	* According to config2 it would be 5-ways, but that is
	* contradicted by all documentation.
	*/
	case MACH_INGENIC_JZ4770:
	c->scache.ways = 4;
	break;

	/*
	* According to config2 it would be 5-ways and 512-sets,
	* but that is contradicted by all documentation.
	*/
	case MACH_INGENIC_X1000:
	c->scache.sets = 256;
	c->scache.ways = 4;
	break;
	}
	}

	c->scache.waysize = c->scache.sets * c->scache.linesz;
	c->scache.waybit = __ffs(c->scache.waysize);

	c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;

	return 1;
	}

	int mips_sc_init(void)
	{
	int found = mips_sc_probe();
	if (found) {
	mips_sc_enable();
	mips_sc_prefetch_enable();
	bcops = &mips_sc_ops;
	}
	return found;
	}