| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * sama5d3xcm_cmp.dtsi - Device Tree Include file for SAMA5D36 CMP CPU Module |
| * |
| * Copyright (C) 2016 Atmel, |
| */ |
| |
| / { |
| compatible = "atmel,sama5d3xcm-cmp", "atmel,sama5d3", "atmel,sama5"; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| memory { |
| reg = <0x20000000 0x20000000>; |
| }; |
| |
| clocks { |
| slow_xtal { |
| clock-frequency = <32768>; |
| }; |
| |
| main_xtal { |
| clock-frequency = <12000000>; |
| }; |
| }; |
| |
| ahb { |
| apb { |
| spi0: spi@f0004000 { |
| cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; |
| }; |
| |
| tcb0: timer@f0010000 { |
| timer@0 { |
| compatible = "atmel,tcb-timer"; |
| reg = <0>; |
| }; |
| |
| timer@1 { |
| compatible = "atmel,tcb-timer"; |
| reg = <1>; |
| }; |
| }; |
| |
| macb0: ethernet@f0028000 { |
| phy-mode = "rgmii"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethernet-phy@1 { |
| reg = <0x1>; |
| interrupt-parent = <&pioB>; |
| interrupts = <25 IRQ_TYPE_EDGE_FALLING>; |
| txen-skew-ps = <800>; |
| txc-skew-ps = <3000>; |
| rxdv-skew-ps = <400>; |
| rxc-skew-ps = <3000>; |
| rxd0-skew-ps = <400>; |
| rxd1-skew-ps = <400>; |
| rxd2-skew-ps = <400>; |
| rxd3-skew-ps = <400>; |
| }; |
| |
| ethernet-phy@7 { |
| reg = <0x7>; |
| interrupt-parent = <&pioB>; |
| interrupts = <25 IRQ_TYPE_EDGE_FALLING>; |
| txen-skew-ps = <800>; |
| txc-skew-ps = <3000>; |
| rxdv-skew-ps = <400>; |
| rxc-skew-ps = <3000>; |
| rxd0-skew-ps = <400>; |
| rxd1-skew-ps = <400>; |
| rxd2-skew-ps = <400>; |
| rxd3-skew-ps = <400>; |
| }; |
| }; |
| |
| i2c1: i2c@f0018000 { |
| pmic: act8865@5b { |
| compatible = "active-semi,act8865"; |
| reg = <0x5b>; |
| status = "disabled"; |
| |
| regulators { |
| vcc_1v8_reg: DCDC_REG1 { |
| regulator-name = "VCC_1V8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| }; |
| |
| vcc_1v2_reg: DCDC_REG2 { |
| regulator-name = "VCC_1V2"; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1300000>; |
| regulator-always-on; |
| }; |
| |
| vcc_3v3_reg: DCDC_REG3 { |
| regulator-name = "VCC_3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vddana_reg: LDO_REG1 { |
| regulator-name = "VDDANA"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vddfuse_reg: LDO_REG2 { |
| regulator-name = "FUSE_2V5"; |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2500000>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| ebi: ebi@10000000 { |
| pinctrl-0 = <&pinctrl_ebi_nand_addr>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| |
| nand_controller: nand-controller { |
| status = "okay"; |
| |
| nand@3 { |
| reg = <0x3 0x0 0x2>; |
| atmel,rb = <0>; |
| nand-bus-width = <8>; |
| nand-ecc-mode = "hw"; |
| nand-ecc-strength = <4>; |
| nand-ecc-step-size = <512>; |
| nand-on-flash-bbt; |
| label = "atmel_nand"; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| at91bootstrap@0 { |
| label = "at91bootstrap"; |
| reg = <0x0 0x40000>; |
| }; |
| |
| bootloader@40000 { |
| label = "bootloader"; |
| reg = <0x40000 0x80000>; |
| }; |
| |
| bootloaderenv@c0000 { |
| label = "bootloader env"; |
| reg = <0xc0000 0xc0000>; |
| }; |
| |
| dtb@180000 { |
| label = "device tree"; |
| reg = <0x180000 0x80000>; |
| }; |
| |
| kernel@200000 { |
| label = "kernel"; |
| reg = <0x200000 0x600000>; |
| }; |
| |
| rootfs@800000 { |
| label = "rootfs"; |
| reg = <0x800000 0x0f800000>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| d2 { |
| label = "d2"; |
| gpios = <&pioE 25 GPIO_ACTIVE_LOW>; |
| linux,default-trigger = "heartbeat"; |
| }; |
| }; |
| }; |