| // SPDX-License-Identifier: GPL-2.0 |
| // Copyright (C) 2018 ROHM Semiconductors |
| // ROHM BD70528MWV watchdog driver |
| |
| #include <linux/bcd.h> |
| #include <linux/kernel.h> |
| #include <linux/mfd/rohm-bd70528.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/watchdog.h> |
| |
| /* |
| * Max time we can set is 1 hour, 59 minutes and 59 seconds |
| * and Minimum time is 1 second |
| */ |
| #define WDT_MAX_MS ((2 * 60 * 60 - 1) * 1000) |
| #define WDT_MIN_MS 1000 |
| #define DEFAULT_TIMEOUT 60 |
| |
| #define WD_CTRL_MAGIC1 0x55 |
| #define WD_CTRL_MAGIC2 0xAA |
| |
| struct wdtbd70528 { |
| struct device *dev; |
| struct regmap *regmap; |
| struct rohm_regmap_dev *mfd; |
| struct watchdog_device wdt; |
| }; |
| |
| /** |
| * bd70528_wdt_set - arm or disarm watchdog timer |
| * |
| * @data: device data for the PMIC instance we want to operate on |
| * @enable: new state of WDT. zero to disable, non zero to enable |
| * @old_state: previous state of WDT will be filled here |
| * |
| * Arm or disarm WDT on BD70528 PMIC. Expected to be called only by |
| * BD70528 RTC and BD70528 WDT drivers. The rtc_timer_lock must be taken |
| * by calling bd70528_wdt_lock before calling bd70528_wdt_set. |
| */ |
| int bd70528_wdt_set(struct rohm_regmap_dev *data, int enable, int *old_state) |
| { |
| int ret, i; |
| unsigned int tmp; |
| struct bd70528_data *bd70528 = container_of(data, struct bd70528_data, |
| chip); |
| u8 wd_ctrl_arr[3] = { WD_CTRL_MAGIC1, WD_CTRL_MAGIC2, 0 }; |
| u8 *wd_ctrl = &wd_ctrl_arr[2]; |
| |
| ret = regmap_read(bd70528->chip.regmap, BD70528_REG_WDT_CTRL, &tmp); |
| if (ret) |
| return ret; |
| |
| *wd_ctrl = (u8)tmp; |
| |
| if (old_state) { |
| if (*wd_ctrl & BD70528_MASK_WDT_EN) |
| *old_state |= BD70528_WDT_STATE_BIT; |
| else |
| *old_state &= ~BD70528_WDT_STATE_BIT; |
| if ((!enable) == (!(*old_state & BD70528_WDT_STATE_BIT))) |
| return 0; |
| } |
| |
| if (enable) { |
| if (*wd_ctrl & BD70528_MASK_WDT_EN) |
| return 0; |
| *wd_ctrl |= BD70528_MASK_WDT_EN; |
| } else { |
| if (*wd_ctrl & BD70528_MASK_WDT_EN) |
| *wd_ctrl &= ~BD70528_MASK_WDT_EN; |
| else |
| return 0; |
| } |
| |
| for (i = 0; i < 3; i++) { |
| ret = regmap_write(bd70528->chip.regmap, BD70528_REG_WDT_CTRL, |
| wd_ctrl_arr[i]); |
| if (ret) |
| return ret; |
| } |
| |
| ret = regmap_read(bd70528->chip.regmap, BD70528_REG_WDT_CTRL, &tmp); |
| if ((tmp & BD70528_MASK_WDT_EN) != (*wd_ctrl & BD70528_MASK_WDT_EN)) { |
| dev_err(bd70528->chip.dev, |
| "Watchdog ctrl mismatch (hw) 0x%x (set) 0x%x\n", |
| tmp, *wd_ctrl); |
| ret = -EIO; |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(bd70528_wdt_set); |
| |
| /** |
| * bd70528_wdt_lock - take WDT lock |
| * |
| * @bd70528: device data for the PMIC instance we want to operate on |
| * |
| * Lock WDT for arming/disarming in order to avoid race condition caused |
| * by WDT state changes initiated by WDT and RTC drivers. |
| */ |
| void bd70528_wdt_lock(struct rohm_regmap_dev *data) |
| { |
| struct bd70528_data *bd70528 = container_of(data, struct bd70528_data, |
| chip); |
| |
| mutex_lock(&bd70528->rtc_timer_lock); |
| } |
| EXPORT_SYMBOL(bd70528_wdt_lock); |
| |
| /** |
| * bd70528_wdt_unlock - unlock WDT lock |
| * |
| * @bd70528: device data for the PMIC instance we want to operate on |
| * |
| * Unlock WDT lock which has previously been taken by call to |
| * bd70528_wdt_lock. |
| */ |
| void bd70528_wdt_unlock(struct rohm_regmap_dev *data) |
| { |
| struct bd70528_data *bd70528 = container_of(data, struct bd70528_data, |
| chip); |
| |
| mutex_unlock(&bd70528->rtc_timer_lock); |
| } |
| EXPORT_SYMBOL(bd70528_wdt_unlock); |
| |
| static int bd70528_wdt_set_locked(struct wdtbd70528 *w, int enable) |
| { |
| return bd70528_wdt_set(w->mfd, enable, NULL); |
| } |
| |
| static int bd70528_wdt_change(struct wdtbd70528 *w, int enable) |
| { |
| int ret; |
| |
| bd70528_wdt_lock(w->mfd); |
| ret = bd70528_wdt_set_locked(w, enable); |
| bd70528_wdt_unlock(w->mfd); |
| |
| return ret; |
| } |
| |
| static int bd70528_wdt_start(struct watchdog_device *wdt) |
| { |
| struct wdtbd70528 *w = watchdog_get_drvdata(wdt); |
| |
| dev_dbg(w->dev, "WDT ping...\n"); |
| return bd70528_wdt_change(w, 1); |
| } |
| |
| static int bd70528_wdt_stop(struct watchdog_device *wdt) |
| { |
| struct wdtbd70528 *w = watchdog_get_drvdata(wdt); |
| |
| dev_dbg(w->dev, "WDT stopping...\n"); |
| return bd70528_wdt_change(w, 0); |
| } |
| |
| static int bd70528_wdt_set_timeout(struct watchdog_device *wdt, |
| unsigned int timeout) |
| { |
| unsigned int hours; |
| unsigned int minutes; |
| unsigned int seconds; |
| int ret; |
| struct wdtbd70528 *w = watchdog_get_drvdata(wdt); |
| |
| seconds = timeout; |
| hours = timeout / (60 * 60); |
| /* Maximum timeout is 1h 59m 59s => hours is 1 or 0 */ |
| if (hours) |
| seconds -= (60 * 60); |
| minutes = seconds / 60; |
| seconds = seconds % 60; |
| |
| bd70528_wdt_lock(w->mfd); |
| |
| ret = bd70528_wdt_set_locked(w, 0); |
| if (ret) |
| goto out_unlock; |
| |
| ret = regmap_update_bits(w->regmap, BD70528_REG_WDT_HOUR, |
| BD70528_MASK_WDT_HOUR, hours); |
| if (ret) { |
| dev_err(w->dev, "Failed to set WDT hours\n"); |
| goto out_en_unlock; |
| } |
| ret = regmap_update_bits(w->regmap, BD70528_REG_WDT_MINUTE, |
| BD70528_MASK_WDT_MINUTE, bin2bcd(minutes)); |
| if (ret) { |
| dev_err(w->dev, "Failed to set WDT minutes\n"); |
| goto out_en_unlock; |
| } |
| ret = regmap_update_bits(w->regmap, BD70528_REG_WDT_SEC, |
| BD70528_MASK_WDT_SEC, bin2bcd(seconds)); |
| if (ret) |
| dev_err(w->dev, "Failed to set WDT seconds\n"); |
| else |
| dev_dbg(w->dev, "WDT tmo set to %u\n", timeout); |
| |
| out_en_unlock: |
| ret = bd70528_wdt_set_locked(w, 1); |
| out_unlock: |
| bd70528_wdt_unlock(w->mfd); |
| |
| return ret; |
| } |
| |
| static const struct watchdog_info bd70528_wdt_info = { |
| .identity = "bd70528-wdt", |
| .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, |
| }; |
| |
| static const struct watchdog_ops bd70528_wdt_ops = { |
| .start = bd70528_wdt_start, |
| .stop = bd70528_wdt_stop, |
| .set_timeout = bd70528_wdt_set_timeout, |
| }; |
| |
| static int bd70528_wdt_probe(struct platform_device *pdev) |
| { |
| struct rohm_regmap_dev *bd70528; |
| struct wdtbd70528 *w; |
| int ret; |
| unsigned int reg; |
| |
| bd70528 = dev_get_drvdata(pdev->dev.parent); |
| if (!bd70528) { |
| dev_err(&pdev->dev, "No MFD driver data\n"); |
| return -EINVAL; |
| } |
| w = devm_kzalloc(&pdev->dev, sizeof(*w), GFP_KERNEL); |
| if (!w) |
| return -ENOMEM; |
| |
| w->regmap = bd70528->regmap; |
| w->mfd = bd70528; |
| w->dev = &pdev->dev; |
| |
| w->wdt.info = &bd70528_wdt_info; |
| w->wdt.ops = &bd70528_wdt_ops; |
| w->wdt.min_hw_heartbeat_ms = WDT_MIN_MS; |
| w->wdt.max_hw_heartbeat_ms = WDT_MAX_MS; |
| w->wdt.parent = pdev->dev.parent; |
| w->wdt.timeout = DEFAULT_TIMEOUT; |
| watchdog_set_drvdata(&w->wdt, w); |
| watchdog_init_timeout(&w->wdt, 0, pdev->dev.parent); |
| |
| ret = bd70528_wdt_set_timeout(&w->wdt, w->wdt.timeout); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to set the watchdog timeout\n"); |
| return ret; |
| } |
| |
| bd70528_wdt_lock(w->mfd); |
| ret = regmap_read(w->regmap, BD70528_REG_WDT_CTRL, ®); |
| bd70528_wdt_unlock(w->mfd); |
| |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to get the watchdog state\n"); |
| return ret; |
| } |
| if (reg & BD70528_MASK_WDT_EN) { |
| dev_dbg(&pdev->dev, "watchdog was running during probe\n"); |
| set_bit(WDOG_HW_RUNNING, &w->wdt.status); |
| } |
| |
| ret = devm_watchdog_register_device(&pdev->dev, &w->wdt); |
| if (ret < 0) |
| dev_err(&pdev->dev, "watchdog registration failed: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static struct platform_driver bd70528_wdt = { |
| .driver = { |
| .name = "bd70528-wdt" |
| }, |
| .probe = bd70528_wdt_probe, |
| }; |
| |
| module_platform_driver(bd70528_wdt); |
| |
| MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>"); |
| MODULE_DESCRIPTION("BD70528 watchdog driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:bd70528-wdt"); |