| # SPDX-License-Identifier: GPL-2.0-only |
| menu "Platform selection" |
| |
| config ARCH_ACTIONS |
| bool "Actions Semi Platforms" |
| select OWL_TIMER |
| select PINCTRL |
| help |
| This enables support for the Actions Semiconductor S900 SoC family. |
| |
| config ARCH_SUNXI |
| bool "Allwinner sunxi 64-bit SoC Family" |
| select ARCH_HAS_RESET_CONTROLLER |
| select PINCTRL |
| select RESET_CONTROLLER |
| select SUN4I_TIMER |
| select SUN6I_R_INTC |
| select SUNXI_NMI_INTC |
| help |
| This enables support for Allwinner sunxi based SoCs like the A64. |
| |
| config ARCH_ALPINE |
| bool "Annapurna Labs Alpine platform" |
| select ALPINE_MSI if PCI |
| help |
| This enables support for the Annapurna Labs Alpine |
| Soc family. |
| |
| config ARCH_APPLE |
| bool "Apple Silicon SoC family" |
| select APPLE_AIC |
| help |
| This enables support for Apple's in-house ARM SoC family, starting |
| with the Apple M1. |
| |
| menuconfig ARCH_BCM |
| bool "Broadcom SoC Support" |
| |
| if ARCH_BCM |
| |
| config ARCH_BCM2835 |
| bool "Broadcom BCM2835 family" |
| select TIMER_OF |
| select GPIOLIB |
| select MFD_CORE |
| select PINCTRL |
| select PINCTRL_BCM2835 |
| select ARM_AMBA |
| select ARM_GIC |
| select ARM_TIMER_SP804 |
| help |
| This enables support for the Broadcom BCM2837 and BCM2711 SoC. |
| These SoCs are used in the Raspberry Pi 3 and 4 devices. |
| |
| config ARCH_BCM_IPROC |
| bool "Broadcom iProc SoC Family" |
| select COMMON_CLK_IPROC |
| select GPIOLIB |
| select PINCTRL |
| help |
| This enables support for Broadcom iProc based SoCs |
| |
| config ARCH_BCMBCA |
| bool "Broadcom Broadband Carrier Access (BCA) origin SoC" |
| select GPIOLIB |
| help |
| Say Y if you intend to run the kernel on a Broadcom Broadband ARM-based |
| BCA chipset. |
| |
| This enables support for Broadcom BCA ARM-based broadband chipsets, |
| including the DSL, PON and Wireless family of chips. |
| |
| config ARCH_BRCMSTB |
| bool "Broadcom Set-Top-Box SoCs" |
| select ARCH_HAS_RESET_CONTROLLER |
| select GENERIC_IRQ_CHIP |
| select PINCTRL |
| help |
| This enables support for Broadcom's ARMv8 Set Top Box SoCs |
| |
| endif |
| |
| config ARCH_BERLIN |
| bool "Marvell Berlin SoC Family" |
| select DW_APB_ICTL |
| select DW_APB_TIMER_OF |
| select GPIOLIB |
| select PINCTRL |
| help |
| This enables support for Marvell Berlin SoC Family |
| |
| config ARCH_BITMAIN |
| bool "Bitmain SoC Platforms" |
| help |
| This enables support for the Bitmain SoC Family. |
| |
| config ARCH_EXYNOS |
| bool "Samsung Exynos SoC family" |
| select COMMON_CLK_SAMSUNG |
| select CLKSRC_EXYNOS_MCT |
| select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS |
| select EXYNOS_PMU |
| select PINCTRL |
| select PINCTRL_EXYNOS |
| select PM_GENERIC_DOMAINS if PM |
| select SOC_SAMSUNG |
| help |
| This enables support for ARMv8 based Samsung Exynos SoC family. |
| |
| config ARCH_SPARX5 |
| bool "Microchip Sparx5 SoC family" |
| select PINCTRL |
| select DW_APB_TIMER_OF |
| help |
| This enables support for the Microchip Sparx5 ARMv8-based |
| SoC family of TSN-capable gigabit switches. |
| |
| The SparX-5 Ethernet switch family provides a rich set of |
| switching features such as advanced TCAM-based VLAN and QoS |
| processing enabling delivery of differentiated services, and |
| security through TCAM-based frame processing using versatile |
| content aware processor (VCAP). |
| |
| config ARCH_K3 |
| bool "Texas Instruments Inc. K3 multicore SoC architecture" |
| select PM_GENERIC_DOMAINS if PM |
| select MAILBOX |
| select SOC_TI |
| select TI_MESSAGE_MANAGER |
| select TI_SCI_PROTOCOL |
| select TI_SCI_INTR_IRQCHIP |
| select TI_SCI_INTA_IRQCHIP |
| select TI_K3_SOCINFO |
| help |
| This enables support for Texas Instruments' K3 multicore SoC |
| architecture. |
| |
| config ARCH_LG1K |
| bool "LG Electronics LG1K SoC Family" |
| help |
| This enables support for LG Electronics LG1K SoC Family |
| |
| config ARCH_HISI |
| bool "Hisilicon SoC Family" |
| select ARM_TIMER_SP804 |
| select HISILICON_IRQ_MBIGEN if PCI |
| select PINCTRL |
| help |
| This enables support for Hisilicon ARMv8 SoC family |
| |
| config ARCH_KEEMBAY |
| bool "Keem Bay SoC" |
| help |
| This enables support for Intel Movidius SoC code-named Keem Bay. |
| |
| config ARCH_MEDIATEK |
| bool "MediaTek SoC Family" |
| select ARM_GIC |
| select PINCTRL |
| select MTK_TIMER |
| help |
| This enables support for MediaTek MT27xx, MT65xx, MT76xx |
| & MT81xx ARMv8 SoCs |
| |
| config ARCH_MESON |
| bool "Amlogic Platforms" |
| help |
| This enables support for the arm64 based Amlogic SoCs |
| such as the s905, S905X/D, S912, A113X/D or S905X/D2 |
| |
| config ARCH_MVEBU |
| bool "Marvell EBU SoC Family" |
| select ARMADA_AP806_SYSCON |
| select ARMADA_CP110_SYSCON |
| select ARMADA_37XX_CLK |
| select GPIOLIB |
| select GPIOLIB_IRQCHIP |
| select MVEBU_GICP |
| select MVEBU_ICU |
| select MVEBU_ODMI |
| select MVEBU_PIC |
| select MVEBU_SEI |
| select OF_GPIO |
| select PINCTRL |
| select PINCTRL_ARMADA_37XX |
| select PINCTRL_ARMADA_AP806 |
| select PINCTRL_ARMADA_CP110 |
| select PINCTRL_AC5 |
| help |
| This enables support for Marvell EBU family, including: |
| - Armada 3700 SoC Family |
| - Armada 7K SoC Family |
| - Armada 8K SoC Family |
| - 98DX2530 SoC Family |
| |
| menuconfig ARCH_NXP |
| bool "NXP SoC support" |
| |
| if ARCH_NXP |
| |
| config ARCH_LAYERSCAPE |
| bool "Freescale Layerscape SoC family" |
| select EDAC_SUPPORT |
| help |
| This enables support for the Freescale Layerscape SoC family. |
| |
| config ARCH_MXC |
| bool "NXP i.MX SoC family" |
| select ARM64_ERRATUM_843419 |
| select ARM64_ERRATUM_845719 if COMPAT |
| select IMX_GPCV2 |
| select IMX_GPCV2_PM_DOMAINS |
| select PM |
| select PM_GENERIC_DOMAINS |
| select SOC_BUS |
| select TIMER_IMX_SYS_CTR |
| help |
| This enables support for the ARMv8 based SoCs in the |
| NXP i.MX family. |
| |
| config ARCH_S32 |
| bool "NXP S32 SoC Family" |
| help |
| This enables support for the NXP S32 family of processors. |
| |
| endif |
| |
| config ARCH_MA35 |
| bool "Nuvoton MA35 Architecture" |
| select GPIOLIB |
| select PINCTRL |
| select RESET_CONTROLLER |
| help |
| This enables support for the ARMv8 based Nuvoton MA35 series SoCs. |
| |
| config ARCH_NPCM |
| bool "Nuvoton NPCM Architecture" |
| select PINCTRL |
| select GPIOLIB |
| select NPCM7XX_TIMER |
| select RESET_CONTROLLER |
| select MFD_SYSCON |
| help |
| General support for NPCM8xx BMC (Arbel). |
| Nuvoton NPCM8xx BMC based on the Cortex A35. |
| |
| config ARCH_QCOM |
| bool "Qualcomm Platforms" |
| select GPIOLIB |
| select PINCTRL |
| help |
| This enables support for the ARMv8 based Qualcomm chipsets. |
| |
| config ARCH_REALTEK |
| bool "Realtek Platforms" |
| select RESET_CONTROLLER |
| help |
| This enables support for the ARMv8 based Realtek chipsets, |
| like the RTD1295. |
| |
| config ARCH_RENESAS |
| bool "Renesas SoC Platforms" |
| help |
| This enables support for the ARMv8 based Renesas SoCs. |
| |
| config ARCH_ROCKCHIP |
| bool "Rockchip Platforms" |
| select ARCH_HAS_RESET_CONTROLLER |
| select PINCTRL |
| select PM |
| select ROCKCHIP_TIMER |
| help |
| This enables support for the ARMv8 based Rockchip chipsets, |
| like the RK3368. |
| |
| config ARCH_SEATTLE |
| bool "AMD Seattle SoC Family" |
| help |
| This enables support for AMD Seattle SOC Family |
| |
| config ARCH_INTEL_SOCFPGA |
| bool "Intel's SoCFPGA ARMv8 Families" |
| help |
| This enables support for Intel's SoCFPGA ARMv8 families: |
| Stratix 10 (ex. Altera), Stratix10 Software Virtual Platform, |
| Agilex and eASIC N5X. |
| |
| config ARCH_STM32 |
| bool "STMicroelectronics STM32 SoC Family" |
| select GPIOLIB |
| select PINCTRL |
| select PINCTRL_STM32MP257 |
| select ARM_SMC_MBOX |
| select ARM_SCMI_PROTOCOL |
| select COMMON_CLK_SCMI |
| help |
| This enables support for ARMv8 based STMicroelectronics |
| STM32 family, including: |
| - STM32MP25: |
| - STM32MP251, STM32MP253, STM32MP255 and STM32MP257. |
| |
| config ARCH_SYNQUACER |
| bool "Socionext SynQuacer SoC Family" |
| select IRQ_FASTEOI_HIERARCHY_HANDLERS |
| |
| config ARCH_TEGRA |
| bool "NVIDIA Tegra SoC Family" |
| select ARCH_HAS_RESET_CONTROLLER |
| select ARM_GIC_PM |
| select CLKSRC_MMIO |
| select TIMER_OF |
| select GPIOLIB |
| select PINCTRL |
| select PM |
| select PM_GENERIC_DOMAINS |
| select RESET_CONTROLLER |
| help |
| This enables support for the NVIDIA Tegra SoC family. |
| |
| config ARCH_TESLA_FSD |
| bool "Tesla platform" |
| depends on ARCH_EXYNOS |
| help |
| Support for ARMv8 based Tesla platforms. |
| |
| config ARCH_SPRD |
| bool "Spreadtrum SoC platform" |
| help |
| Support for Spreadtrum ARM based SoCs |
| |
| config ARCH_THUNDER |
| bool "Cavium Inc. Thunder SoC Family" |
| help |
| This enables support for Cavium's Thunder Family of SoCs. |
| |
| config ARCH_THUNDER2 |
| bool "Cavium ThunderX2 Server Processors" |
| select GPIOLIB |
| help |
| This enables support for Cavium's ThunderX2 CN99XX family of |
| server processors. |
| |
| config ARCH_UNIPHIER |
| bool "Socionext UniPhier SoC Family" |
| select ARCH_HAS_RESET_CONTROLLER |
| select PINCTRL |
| select RESET_CONTROLLER |
| help |
| This enables support for Socionext UniPhier SoC family. |
| |
| config ARCH_VEXPRESS |
| bool "ARMv8 software model (Versatile Express)" |
| select GPIOLIB |
| select PM |
| select PM_GENERIC_DOMAINS |
| help |
| This enables support for the ARMv8 software model (Versatile |
| Express). |
| |
| config ARCH_VISCONTI |
| bool "Toshiba Visconti SoC Family" |
| select PINCTRL |
| select PINCTRL_VISCONTI |
| help |
| This enables support for Toshiba Visconti SoCs Family. |
| |
| config ARCH_XGENE |
| bool "AppliedMicro X-Gene SOC Family" |
| help |
| This enables support for AppliedMicro X-Gene SOC Family |
| |
| config ARCH_ZYNQMP |
| bool "Xilinx ZynqMP Family" |
| help |
| This enables support for Xilinx ZynqMP Family |
| |
| endmenu # "Platform selection" |
