blob: f6d7d7f7fdabe908bb26806ae3f117c29b2b969a [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ or MIT)
/*
* Copyright (c) 2020 Yangtao Li <frank@allwinnertech.com>
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun50i-a100-ccu.h>
#include <dt-bindings/clock/sun50i-a100-r-ccu.h>
#include <dt-bindings/reset/sun50i-a100-ccu.h>
#include <dt-bindings/reset/sun50i-a100-r-ccu.h>
/ {
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
compatible = "arm,cortex-a53";
device_type = "cpu";
reg = <0x0>;
enable-method = "psci";
};
cpu@1 {
compatible = "arm,cortex-a53";
device_type = "cpu";
reg = <0x1>;
enable-method = "psci";
};
cpu@2 {
compatible = "arm,cortex-a53";
device_type = "cpu";
reg = <0x2>;
enable-method = "psci";
};
cpu@3 {
compatible = "arm,cortex-a53";
device_type = "cpu";
reg = <0x3>;
enable-method = "psci";
};
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
dcxo24M: dcxo24M-clk {
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "dcxo24M";
#clock-cells = <0>;
};
iosc: internal-osc-clk {
compatible = "fixed-clock";
clock-frequency = <16000000>;
clock-accuracy = <300000000>;
clock-output-names = "iosc";
#clock-cells = <0>;
};
osc32k: osc32k-clk {
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "osc32k";
#clock-cells = <0>;
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 14
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 11
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 10
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0x3fffffff>;
ccu: clock@3001000 {
compatible = "allwinner,sun50i-a100-ccu";
reg = <0x03001000 0x1000>;
clocks = <&dcxo24M>, <&osc32k>, <&iosc>;
clock-names = "hosc", "losc", "iosc";
#clock-cells = <1>;
#reset-cells = <1>;
};
gic: interrupt-controller@3021000 {
compatible = "arm,gic-400";
reg = <0x03021000 0x1000>, <0x03022000 0x2000>,
<0x03024000 0x2000>, <0x03026000 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_HIGH)>;
interrupt-controller;
#interrupt-cells = <3>;
};
efuse@3006000 {
compatible = "allwinner,sun50i-a100-sid",
"allwinner,sun50i-a64-sid";
reg = <0x03006000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ths_calibration: calib@14 {
reg = <0x14 8>;
};
};
pio: pinctrl@300b000 {
compatible = "allwinner,sun50i-a100-pinctrl";
reg = <0x0300b000 0x400>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB1>, <&dcxo24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
interrupt-controller;
#interrupt-cells = <3>;
uart0_pb_pins: uart0-pb-pins {
pins = "PB9", "PB10";
function = "uart0";
};
};
uart0: serial@5000000 {
compatible = "snps,dw-apb-uart";
reg = <0x05000000 0x400>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART0>;
resets = <&ccu RST_BUS_UART0>;
status = "disabled";
};
uart1: serial@5000400 {
compatible = "snps,dw-apb-uart";
reg = <0x05000400 0x400>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART1>;
resets = <&ccu RST_BUS_UART1>;
status = "disabled";
};
uart2: serial@5000800 {
compatible = "snps,dw-apb-uart";
reg = <0x05000800 0x400>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART2>;
resets = <&ccu RST_BUS_UART2>;
status = "disabled";
};
uart3: serial@5000c00 {
compatible = "snps,dw-apb-uart";
reg = <0x05000c00 0x400>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART3>;
resets = <&ccu RST_BUS_UART3>;
status = "disabled";
};
uart4: serial@5001000 {
compatible = "snps,dw-apb-uart";
reg = <0x05001000 0x400>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART4>;
resets = <&ccu RST_BUS_UART4>;
status = "disabled";
};
i2c0: i2c@5002000 {
compatible = "allwinner,sun50i-a100-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x05002000 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C0>;
resets = <&ccu RST_BUS_I2C0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c1: i2c@5002400 {
compatible = "allwinner,sun50i-a100-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x05002400 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C1>;
resets = <&ccu RST_BUS_I2C1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c2: i2c@5002800 {
compatible = "allwinner,sun50i-a100-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x05002800 0x400>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C2>;
resets = <&ccu RST_BUS_I2C2>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c3: i2c@5002c00 {
compatible = "allwinner,sun50i-a100-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x05002c00 0x400>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C3>;
resets = <&ccu RST_BUS_I2C3>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
ths: thermal-sensor@5070400 {
compatible = "allwinner,sun50i-a100-ths";
reg = <0x05070400 0x100>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_THS>;
clock-names = "bus";
resets = <&ccu RST_BUS_THS>;
nvmem-cells = <&ths_calibration>;
nvmem-cell-names = "calibration";
#thermal-sensor-cells = <1>;
};
r_ccu: clock@7010000 {
compatible = "allwinner,sun50i-a100-r-ccu";
reg = <0x07010000 0x300>;
clocks = <&dcxo24M>, <&osc32k>, <&iosc>,
<&ccu CLK_PLL_PERIPH0>;
clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
#reset-cells = <1>;
};
r_intc: interrupt-controller@7010320 {
compatible = "allwinner,sun50i-a100-nmi",
"allwinner,sun9i-a80-nmi";
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x07010320 0xc>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
};
r_pio: pinctrl@7022000 {
compatible = "allwinner,sun50i-a100-r-pinctrl";
reg = <0x07022000 0x400>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&r_ccu CLK_R_APB1>, <&dcxo24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
interrupt-controller;
#interrupt-cells = <3>;
r_i2c0_pins: r-i2c0-pins {
pins = "PL0", "PL1";
function = "s_i2c0";
};
r_i2c1_pins: r-i2c1-pins {
pins = "PL8", "PL9";
function = "s_i2c1";
};
};
r_uart: serial@7080000 {
compatible = "snps,dw-apb-uart";
reg = <0x07080000 0x400>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&r_ccu CLK_R_APB2_UART>;
resets = <&r_ccu RST_R_APB2_UART>;
status = "disabled";
};
r_i2c0: i2c@7081400 {
compatible = "allwinner,sun50i-a100-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x07081400 0x400>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&r_ccu CLK_R_APB2_I2C0>;
resets = <&r_ccu RST_R_APB2_I2C0>;
pinctrl-names = "default";
pinctrl-0 = <&r_i2c0_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
r_i2c1: i2c@7081800 {
compatible = "allwinner,sun50i-a100-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x07081800 0x400>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&r_ccu CLK_R_APB2_I2C1>;
resets = <&r_ccu RST_R_APB2_I2C1>;
pinctrl-names = "default";
pinctrl-0 = <&r_i2c1_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
};
thermal-zones {
cpu-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&ths 0>;
};
ddr-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&ths 2>;
};
gpu-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&ths 1>;
};
};
};