| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright © 2006-2011 Intel Corporation |
| * |
| * Authors: |
| * Eric Anholt <eric@anholt.net> |
| * Dave Airlie <airlied@linux.ie> |
| * Jesse Barnes <jesse.barnes@intel.com> |
| */ |
| |
| #include <linux/dmi.h> |
| #include <linux/i2c.h> |
| #include <linux/pm_runtime.h> |
| |
| #include <drm/drm_simple_kms_helper.h> |
| |
| #include "cdv_device.h" |
| #include "intel_bios.h" |
| #include "power.h" |
| #include "psb_drv.h" |
| #include "psb_intel_drv.h" |
| #include "psb_intel_reg.h" |
| |
| /* |
| * LVDS I2C backlight control macros |
| */ |
| #define BRIGHTNESS_MAX_LEVEL 100 |
| #define BRIGHTNESS_MASK 0xFF |
| #define BLC_I2C_TYPE 0x01 |
| #define BLC_PWM_TYPT 0x02 |
| |
| #define BLC_POLARITY_NORMAL 0 |
| #define BLC_POLARITY_INVERSE 1 |
| |
| #define PSB_BLC_MAX_PWM_REG_FREQ (0xFFFE) |
| #define PSB_BLC_MIN_PWM_REG_FREQ (0x2) |
| #define PSB_BLC_PWM_PRECISION_FACTOR (10) |
| #define PSB_BACKLIGHT_PWM_CTL_SHIFT (16) |
| #define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE) |
| |
| struct cdv_intel_lvds_priv { |
| /** |
| * Saved LVDO output states |
| */ |
| uint32_t savePP_ON; |
| uint32_t savePP_OFF; |
| uint32_t saveLVDS; |
| uint32_t savePP_CONTROL; |
| uint32_t savePP_CYCLE; |
| uint32_t savePFIT_CONTROL; |
| uint32_t savePFIT_PGM_RATIOS; |
| uint32_t saveBLC_PWM_CTL; |
| }; |
| |
| /* |
| * Returns the maximum level of the backlight duty cycle field. |
| */ |
| static u32 cdv_intel_lvds_get_max_backlight(struct drm_device *dev) |
| { |
| struct drm_psb_private *dev_priv = to_drm_psb_private(dev); |
| u32 retval; |
| |
| if (gma_power_begin(dev, false)) { |
| retval = ((REG_READ(BLC_PWM_CTL) & |
| BACKLIGHT_MODULATION_FREQ_MASK) >> |
| BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; |
| |
| gma_power_end(dev); |
| } else |
| retval = ((dev_priv->regs.saveBLC_PWM_CTL & |
| BACKLIGHT_MODULATION_FREQ_MASK) >> |
| BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; |
| |
| return retval; |
| } |
| |
| /* |
| * Sets the backlight level. |
| * |
| * level backlight level, from 0 to cdv_intel_lvds_get_max_backlight(). |
| */ |
| static void cdv_intel_lvds_set_backlight(struct drm_device *dev, int level) |
| { |
| struct drm_psb_private *dev_priv = to_drm_psb_private(dev); |
| u32 blc_pwm_ctl; |
| |
| if (gma_power_begin(dev, false)) { |
| blc_pwm_ctl = |
| REG_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK; |
| REG_WRITE(BLC_PWM_CTL, |
| (blc_pwm_ctl | |
| (level << BACKLIGHT_DUTY_CYCLE_SHIFT))); |
| gma_power_end(dev); |
| } else { |
| blc_pwm_ctl = dev_priv->regs.saveBLC_PWM_CTL & |
| ~BACKLIGHT_DUTY_CYCLE_MASK; |
| dev_priv->regs.saveBLC_PWM_CTL = (blc_pwm_ctl | |
| (level << BACKLIGHT_DUTY_CYCLE_SHIFT)); |
| } |
| } |
| |
| /* |
| * Sets the power state for the panel. |
| */ |
| static void cdv_intel_lvds_set_power(struct drm_device *dev, |
| struct drm_encoder *encoder, bool on) |
| { |
| struct drm_psb_private *dev_priv = to_drm_psb_private(dev); |
| u32 pp_status; |
| |
| if (!gma_power_begin(dev, true)) |
| return; |
| |
| if (on) { |
| REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) | |
| POWER_TARGET_ON); |
| do { |
| pp_status = REG_READ(PP_STATUS); |
| } while ((pp_status & PP_ON) == 0); |
| |
| cdv_intel_lvds_set_backlight(dev, |
| dev_priv->mode_dev.backlight_duty_cycle); |
| } else { |
| cdv_intel_lvds_set_backlight(dev, 0); |
| |
| REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) & |
| ~POWER_TARGET_ON); |
| do { |
| pp_status = REG_READ(PP_STATUS); |
| } while (pp_status & PP_ON); |
| } |
| gma_power_end(dev); |
| } |
| |
| static void cdv_intel_lvds_encoder_dpms(struct drm_encoder *encoder, int mode) |
| { |
| struct drm_device *dev = encoder->dev; |
| if (mode == DRM_MODE_DPMS_ON) |
| cdv_intel_lvds_set_power(dev, encoder, true); |
| else |
| cdv_intel_lvds_set_power(dev, encoder, false); |
| /* XXX: We never power down the LVDS pairs. */ |
| } |
| |
| static void cdv_intel_lvds_save(struct drm_connector *connector) |
| { |
| } |
| |
| static void cdv_intel_lvds_restore(struct drm_connector *connector) |
| { |
| } |
| |
| static enum drm_mode_status cdv_intel_lvds_mode_valid(struct drm_connector *connector, |
| struct drm_display_mode *mode) |
| { |
| struct drm_device *dev = connector->dev; |
| struct drm_psb_private *dev_priv = to_drm_psb_private(dev); |
| struct drm_display_mode *fixed_mode = |
| dev_priv->mode_dev.panel_fixed_mode; |
| |
| /* just in case */ |
| if (mode->flags & DRM_MODE_FLAG_DBLSCAN) |
| return MODE_NO_DBLESCAN; |
| |
| /* just in case */ |
| if (mode->flags & DRM_MODE_FLAG_INTERLACE) |
| return MODE_NO_INTERLACE; |
| |
| if (fixed_mode) { |
| if (mode->hdisplay > fixed_mode->hdisplay) |
| return MODE_PANEL; |
| if (mode->vdisplay > fixed_mode->vdisplay) |
| return MODE_PANEL; |
| } |
| return MODE_OK; |
| } |
| |
| static bool cdv_intel_lvds_mode_fixup(struct drm_encoder *encoder, |
| const struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode) |
| { |
| struct drm_device *dev = encoder->dev; |
| struct drm_psb_private *dev_priv = to_drm_psb_private(dev); |
| struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; |
| struct drm_encoder *tmp_encoder; |
| struct drm_display_mode *panel_fixed_mode = mode_dev->panel_fixed_mode; |
| |
| /* Should never happen!! */ |
| list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, |
| head) { |
| if (tmp_encoder != encoder |
| && tmp_encoder->crtc == encoder->crtc) { |
| pr_err("Can't enable LVDS and another encoder on the same pipe\n"); |
| return false; |
| } |
| } |
| |
| /* |
| * If we have timings from the BIOS for the panel, put them in |
| * to the adjusted mode. The CRTC will be set up for this mode, |
| * with the panel scaling set up to source from the H/VDisplay |
| * of the original mode. |
| */ |
| if (panel_fixed_mode != NULL) { |
| adjusted_mode->hdisplay = panel_fixed_mode->hdisplay; |
| adjusted_mode->hsync_start = panel_fixed_mode->hsync_start; |
| adjusted_mode->hsync_end = panel_fixed_mode->hsync_end; |
| adjusted_mode->htotal = panel_fixed_mode->htotal; |
| adjusted_mode->vdisplay = panel_fixed_mode->vdisplay; |
| adjusted_mode->vsync_start = panel_fixed_mode->vsync_start; |
| adjusted_mode->vsync_end = panel_fixed_mode->vsync_end; |
| adjusted_mode->vtotal = panel_fixed_mode->vtotal; |
| adjusted_mode->clock = panel_fixed_mode->clock; |
| drm_mode_set_crtcinfo(adjusted_mode, |
| CRTC_INTERLACE_HALVE_V); |
| } |
| |
| /* |
| * XXX: It would be nice to support lower refresh rates on the |
| * panels to reduce power consumption, and perhaps match the |
| * user's requested refresh rate. |
| */ |
| |
| return true; |
| } |
| |
| static void cdv_intel_lvds_prepare(struct drm_encoder *encoder) |
| { |
| struct drm_device *dev = encoder->dev; |
| struct drm_psb_private *dev_priv = to_drm_psb_private(dev); |
| struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; |
| |
| if (!gma_power_begin(dev, true)) |
| return; |
| |
| mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL); |
| mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL & |
| BACKLIGHT_DUTY_CYCLE_MASK); |
| |
| cdv_intel_lvds_set_power(dev, encoder, false); |
| |
| gma_power_end(dev); |
| } |
| |
| static void cdv_intel_lvds_commit(struct drm_encoder *encoder) |
| { |
| struct drm_device *dev = encoder->dev; |
| struct drm_psb_private *dev_priv = to_drm_psb_private(dev); |
| struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; |
| |
| if (mode_dev->backlight_duty_cycle == 0) |
| mode_dev->backlight_duty_cycle = |
| cdv_intel_lvds_get_max_backlight(dev); |
| |
| cdv_intel_lvds_set_power(dev, encoder, true); |
| } |
| |
| static void cdv_intel_lvds_mode_set(struct drm_encoder *encoder, |
| struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode) |
| { |
| struct drm_device *dev = encoder->dev; |
| struct drm_psb_private *dev_priv = to_drm_psb_private(dev); |
| struct gma_crtc *gma_crtc = to_gma_crtc(encoder->crtc); |
| u32 pfit_control; |
| |
| /* |
| * The LVDS pin pair will already have been turned on in the |
| * cdv_intel_crtc_mode_set since it has a large impact on the DPLL |
| * settings. |
| */ |
| |
| /* |
| * Enable automatic panel scaling so that non-native modes fill the |
| * screen. Should be enabled before the pipe is enabled, according to |
| * register description and PRM. |
| */ |
| if (mode->hdisplay != adjusted_mode->hdisplay || |
| mode->vdisplay != adjusted_mode->vdisplay) |
| pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE | |
| HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR | |
| HORIZ_INTERP_BILINEAR); |
| else |
| pfit_control = 0; |
| |
| pfit_control |= gma_crtc->pipe << PFIT_PIPE_SHIFT; |
| |
| if (dev_priv->lvds_dither) |
| pfit_control |= PANEL_8TO6_DITHER_ENABLE; |
| |
| REG_WRITE(PFIT_CONTROL, pfit_control); |
| } |
| |
| /* |
| * Return the list of DDC modes if available, or the BIOS fixed mode otherwise. |
| */ |
| static int cdv_intel_lvds_get_modes(struct drm_connector *connector) |
| { |
| struct drm_device *dev = connector->dev; |
| struct drm_psb_private *dev_priv = to_drm_psb_private(dev); |
| struct gma_encoder *gma_encoder = gma_attached_encoder(connector); |
| struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; |
| int ret; |
| |
| ret = psb_intel_ddc_get_modes(connector, &gma_encoder->i2c_bus->adapter); |
| |
| if (ret) |
| return ret; |
| |
| if (mode_dev->panel_fixed_mode != NULL) { |
| struct drm_display_mode *mode = |
| drm_mode_duplicate(dev, mode_dev->panel_fixed_mode); |
| drm_mode_probed_add(connector, mode); |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * cdv_intel_lvds_destroy - unregister and free LVDS structures |
| * @connector: connector to free |
| * |
| * Unregister the DDC bus for this connector then free the driver private |
| * structure. |
| */ |
| static void cdv_intel_lvds_destroy(struct drm_connector *connector) |
| { |
| struct gma_encoder *gma_encoder = gma_attached_encoder(connector); |
| |
| psb_intel_i2c_destroy(gma_encoder->i2c_bus); |
| drm_connector_unregister(connector); |
| drm_connector_cleanup(connector); |
| kfree(connector); |
| } |
| |
| static int cdv_intel_lvds_set_property(struct drm_connector *connector, |
| struct drm_property *property, |
| uint64_t value) |
| { |
| struct drm_encoder *encoder = connector->encoder; |
| |
| if (!strcmp(property->name, "scaling mode") && encoder) { |
| struct gma_crtc *crtc = to_gma_crtc(encoder->crtc); |
| uint64_t curValue; |
| |
| if (!crtc) |
| return -1; |
| |
| switch (value) { |
| case DRM_MODE_SCALE_FULLSCREEN: |
| break; |
| case DRM_MODE_SCALE_NO_SCALE: |
| break; |
| case DRM_MODE_SCALE_ASPECT: |
| break; |
| default: |
| return -1; |
| } |
| |
| if (drm_object_property_get_value(&connector->base, |
| property, |
| &curValue)) |
| return -1; |
| |
| if (curValue == value) |
| return 0; |
| |
| if (drm_object_property_set_value(&connector->base, |
| property, |
| value)) |
| return -1; |
| |
| if (crtc->saved_mode.hdisplay != 0 && |
| crtc->saved_mode.vdisplay != 0) { |
| if (!drm_crtc_helper_set_mode(encoder->crtc, |
| &crtc->saved_mode, |
| encoder->crtc->x, |
| encoder->crtc->y, |
| encoder->crtc->primary->fb)) |
| return -1; |
| } |
| } else if (!strcmp(property->name, "backlight") && encoder) { |
| if (drm_object_property_set_value(&connector->base, |
| property, |
| value)) |
| return -1; |
| else |
| gma_backlight_set(encoder->dev, value); |
| } else if (!strcmp(property->name, "DPMS") && encoder) { |
| const struct drm_encoder_helper_funcs *helpers = |
| encoder->helper_private; |
| helpers->dpms(encoder, value); |
| } |
| return 0; |
| } |
| |
| static const struct drm_encoder_helper_funcs |
| cdv_intel_lvds_helper_funcs = { |
| .dpms = cdv_intel_lvds_encoder_dpms, |
| .mode_fixup = cdv_intel_lvds_mode_fixup, |
| .prepare = cdv_intel_lvds_prepare, |
| .mode_set = cdv_intel_lvds_mode_set, |
| .commit = cdv_intel_lvds_commit, |
| }; |
| |
| static const struct drm_connector_helper_funcs |
| cdv_intel_lvds_connector_helper_funcs = { |
| .get_modes = cdv_intel_lvds_get_modes, |
| .mode_valid = cdv_intel_lvds_mode_valid, |
| .best_encoder = gma_best_encoder, |
| }; |
| |
| static const struct drm_connector_funcs cdv_intel_lvds_connector_funcs = { |
| .dpms = drm_helper_connector_dpms, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .set_property = cdv_intel_lvds_set_property, |
| .destroy = cdv_intel_lvds_destroy, |
| }; |
| |
| /* |
| * Enumerate the child dev array parsed from VBT to check whether |
| * the LVDS is present. |
| * If it is present, return 1. |
| * If it is not present, return false. |
| * If no child dev is parsed from VBT, it assumes that the LVDS is present. |
| */ |
| static bool lvds_is_present_in_vbt(struct drm_device *dev, |
| u8 *i2c_pin) |
| { |
| struct drm_psb_private *dev_priv = to_drm_psb_private(dev); |
| int i; |
| |
| if (!dev_priv->child_dev_num) |
| return true; |
| |
| for (i = 0; i < dev_priv->child_dev_num; i++) { |
| struct child_device_config *child = dev_priv->child_dev + i; |
| |
| /* If the device type is not LFP, continue. |
| * We have to check both the new identifiers as well as the |
| * old for compatibility with some BIOSes. |
| */ |
| if (child->device_type != DEVICE_TYPE_INT_LFP && |
| child->device_type != DEVICE_TYPE_LFP) |
| continue; |
| |
| if (child->i2c_pin) |
| *i2c_pin = child->i2c_pin; |
| |
| /* However, we cannot trust the BIOS writers to populate |
| * the VBT correctly. Since LVDS requires additional |
| * information from AIM blocks, a non-zero addin offset is |
| * a good indicator that the LVDS is actually present. |
| */ |
| if (child->addin_offset) |
| return true; |
| |
| /* But even then some BIOS writers perform some black magic |
| * and instantiate the device without reference to any |
| * additional data. Trust that if the VBT was written into |
| * the OpRegion then they have validated the LVDS's existence. |
| */ |
| if (dev_priv->opregion.vbt) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| /** |
| * cdv_intel_lvds_init - setup LVDS connectors on this device |
| * @dev: drm device |
| * @mode_dev: PSB mode device |
| * |
| * Create the connector, register the LVDS DDC bus, and try to figure out what |
| * modes we can display on the LVDS panel (if present). |
| */ |
| void cdv_intel_lvds_init(struct drm_device *dev, |
| struct psb_intel_mode_device *mode_dev) |
| { |
| struct gma_encoder *gma_encoder; |
| struct gma_connector *gma_connector; |
| struct cdv_intel_lvds_priv *lvds_priv; |
| struct drm_connector *connector; |
| struct drm_encoder *encoder; |
| struct drm_display_mode *scan; |
| struct drm_crtc *crtc; |
| struct drm_psb_private *dev_priv = to_drm_psb_private(dev); |
| u32 lvds; |
| int pipe; |
| u8 pin; |
| |
| if (!dev_priv->lvds_enabled_in_vbt) |
| return; |
| |
| pin = GMBUS_PORT_PANEL; |
| if (!lvds_is_present_in_vbt(dev, &pin)) { |
| DRM_DEBUG_KMS("LVDS is not present in VBT\n"); |
| return; |
| } |
| |
| gma_encoder = kzalloc(sizeof(struct gma_encoder), |
| GFP_KERNEL); |
| if (!gma_encoder) |
| return; |
| |
| gma_connector = kzalloc(sizeof(struct gma_connector), |
| GFP_KERNEL); |
| if (!gma_connector) |
| goto failed_connector; |
| |
| lvds_priv = kzalloc(sizeof(struct cdv_intel_lvds_priv), GFP_KERNEL); |
| if (!lvds_priv) |
| goto failed_lvds_priv; |
| |
| gma_encoder->dev_priv = lvds_priv; |
| |
| connector = &gma_connector->base; |
| gma_connector->save = cdv_intel_lvds_save; |
| gma_connector->restore = cdv_intel_lvds_restore; |
| encoder = &gma_encoder->base; |
| |
| |
| drm_connector_init(dev, connector, |
| &cdv_intel_lvds_connector_funcs, |
| DRM_MODE_CONNECTOR_LVDS); |
| |
| drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_LVDS); |
| |
| gma_connector_attach_encoder(gma_connector, gma_encoder); |
| gma_encoder->type = INTEL_OUTPUT_LVDS; |
| |
| drm_encoder_helper_add(encoder, &cdv_intel_lvds_helper_funcs); |
| drm_connector_helper_add(connector, |
| &cdv_intel_lvds_connector_helper_funcs); |
| connector->display_info.subpixel_order = SubPixelHorizontalRGB; |
| connector->interlace_allowed = false; |
| connector->doublescan_allowed = false; |
| |
| /*Attach connector properties*/ |
| drm_object_attach_property(&connector->base, |
| dev->mode_config.scaling_mode_property, |
| DRM_MODE_SCALE_FULLSCREEN); |
| drm_object_attach_property(&connector->base, |
| dev_priv->backlight_property, |
| BRIGHTNESS_MAX_LEVEL); |
| |
| /** |
| * Set up I2C bus |
| * FIXME: distroy i2c_bus when exit |
| */ |
| gma_encoder->i2c_bus = psb_intel_i2c_create(dev, |
| GPIOB, |
| "LVDSBLC_B"); |
| if (!gma_encoder->i2c_bus) { |
| dev_printk(KERN_ERR, |
| dev->dev, "I2C bus registration failed.\n"); |
| goto failed_blc_i2c; |
| } |
| gma_encoder->i2c_bus->slave_addr = 0x2C; |
| dev_priv->lvds_i2c_bus = gma_encoder->i2c_bus; |
| |
| /* |
| * LVDS discovery: |
| * 1) check for EDID on DDC |
| * 2) check for VBT data |
| * 3) check to see if LVDS is already on |
| * if none of the above, no panel |
| * 4) make sure lid is open |
| * if closed, act like it's not there for now |
| */ |
| |
| /* Set up the DDC bus. */ |
| gma_encoder->ddc_bus = psb_intel_i2c_create(dev, |
| GPIOC, |
| "LVDSDDC_C"); |
| if (!gma_encoder->ddc_bus) { |
| dev_printk(KERN_ERR, dev->dev, |
| "DDC bus registration " "failed.\n"); |
| goto failed_ddc; |
| } |
| |
| /* |
| * Attempt to get the fixed panel mode from DDC. Assume that the |
| * preferred mode is the right one. |
| */ |
| mutex_lock(&dev->mode_config.mutex); |
| psb_intel_ddc_get_modes(connector, |
| &gma_encoder->ddc_bus->adapter); |
| list_for_each_entry(scan, &connector->probed_modes, head) { |
| if (scan->type & DRM_MODE_TYPE_PREFERRED) { |
| mode_dev->panel_fixed_mode = |
| drm_mode_duplicate(dev, scan); |
| goto out; /* FIXME: check for quirks */ |
| } |
| } |
| |
| /* Failed to get EDID, what about VBT? do we need this?*/ |
| if (dev_priv->lfp_lvds_vbt_mode) { |
| mode_dev->panel_fixed_mode = |
| drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode); |
| if (mode_dev->panel_fixed_mode) { |
| mode_dev->panel_fixed_mode->type |= |
| DRM_MODE_TYPE_PREFERRED; |
| goto out; /* FIXME: check for quirks */ |
| } |
| } |
| /* |
| * If we didn't get EDID, try checking if the panel is already turned |
| * on. If so, assume that whatever is currently programmed is the |
| * correct mode. |
| */ |
| lvds = REG_READ(LVDS); |
| pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0; |
| crtc = psb_intel_get_crtc_from_pipe(dev, pipe); |
| |
| if (crtc && (lvds & LVDS_PORT_EN)) { |
| mode_dev->panel_fixed_mode = |
| cdv_intel_crtc_mode_get(dev, crtc); |
| if (mode_dev->panel_fixed_mode) { |
| mode_dev->panel_fixed_mode->type |= |
| DRM_MODE_TYPE_PREFERRED; |
| goto out; /* FIXME: check for quirks */ |
| } |
| } |
| |
| /* If we still don't have a mode after all that, give up. */ |
| if (!mode_dev->panel_fixed_mode) { |
| DRM_DEBUG |
| ("Found no modes on the lvds, ignoring the LVDS\n"); |
| goto failed_find; |
| } |
| |
| /* setup PWM */ |
| { |
| u32 pwm; |
| |
| pwm = REG_READ(BLC_PWM_CTL2); |
| if (pipe == 1) |
| pwm |= PWM_PIPE_B; |
| else |
| pwm &= ~PWM_PIPE_B; |
| pwm |= PWM_ENABLE; |
| REG_WRITE(BLC_PWM_CTL2, pwm); |
| } |
| |
| out: |
| mutex_unlock(&dev->mode_config.mutex); |
| drm_connector_register(connector); |
| return; |
| |
| failed_find: |
| mutex_unlock(&dev->mode_config.mutex); |
| pr_err("Failed find\n"); |
| psb_intel_i2c_destroy(gma_encoder->ddc_bus); |
| failed_ddc: |
| pr_err("Failed DDC\n"); |
| psb_intel_i2c_destroy(gma_encoder->i2c_bus); |
| failed_blc_i2c: |
| pr_err("Failed BLC\n"); |
| drm_encoder_cleanup(encoder); |
| drm_connector_cleanup(connector); |
| kfree(lvds_priv); |
| failed_lvds_priv: |
| kfree(gma_connector); |
| failed_connector: |
| kfree(gma_encoder); |
| } |