| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2015, The Linux Foundation. All rights reserved. |
| */ |
| |
| #include "drm/drm_bridge_connector.h" |
| |
| #include "msm_kms.h" |
| #include "dsi.h" |
| |
| #define DSI_CLOCK_MASTER DSI_0 |
| #define DSI_CLOCK_SLAVE DSI_1 |
| |
| #define DSI_LEFT DSI_0 |
| #define DSI_RIGHT DSI_1 |
| |
| /* According to the current drm framework sequence, take the encoder of |
| * DSI_1 as master encoder |
| */ |
| #define DSI_ENCODER_MASTER DSI_1 |
| #define DSI_ENCODER_SLAVE DSI_0 |
| |
| struct msm_dsi_manager { |
| struct msm_dsi *dsi[DSI_MAX]; |
| |
| bool is_bonded_dsi; |
| bool is_sync_needed; |
| int master_dsi_link_id; |
| }; |
| |
| static struct msm_dsi_manager msm_dsim_glb; |
| |
| #define IS_BONDED_DSI() (msm_dsim_glb.is_bonded_dsi) |
| #define IS_SYNC_NEEDED() (msm_dsim_glb.is_sync_needed) |
| #define IS_MASTER_DSI_LINK(id) (msm_dsim_glb.master_dsi_link_id == id) |
| |
| static inline struct msm_dsi *dsi_mgr_get_dsi(int id) |
| { |
| return msm_dsim_glb.dsi[id]; |
| } |
| |
| static inline struct msm_dsi *dsi_mgr_get_other_dsi(int id) |
| { |
| return msm_dsim_glb.dsi[(id + 1) % DSI_MAX]; |
| } |
| |
| static int dsi_mgr_parse_of(struct device_node *np, int id) |
| { |
| struct msm_dsi_manager *msm_dsim = &msm_dsim_glb; |
| |
| /* We assume 2 dsi nodes have the same information of bonded dsi and |
| * sync-mode, and only one node specifies master in case of bonded mode. |
| */ |
| if (!msm_dsim->is_bonded_dsi) |
| msm_dsim->is_bonded_dsi = of_property_read_bool(np, "qcom,dual-dsi-mode"); |
| |
| if (msm_dsim->is_bonded_dsi) { |
| if (of_property_read_bool(np, "qcom,master-dsi")) |
| msm_dsim->master_dsi_link_id = id; |
| if (!msm_dsim->is_sync_needed) |
| msm_dsim->is_sync_needed = of_property_read_bool( |
| np, "qcom,sync-dual-dsi"); |
| } |
| |
| return 0; |
| } |
| |
| static int dsi_mgr_setup_components(int id) |
| { |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct msm_dsi *other_dsi = dsi_mgr_get_other_dsi(id); |
| struct msm_dsi *clk_master_dsi = dsi_mgr_get_dsi(DSI_CLOCK_MASTER); |
| struct msm_dsi *clk_slave_dsi = dsi_mgr_get_dsi(DSI_CLOCK_SLAVE); |
| int ret; |
| |
| if (!IS_BONDED_DSI()) { |
| ret = msm_dsi_host_register(msm_dsi->host, true); |
| if (ret) |
| return ret; |
| |
| msm_dsi_phy_set_usecase(msm_dsi->phy, MSM_DSI_PHY_STANDALONE); |
| ret = msm_dsi_host_set_src_pll(msm_dsi->host, msm_dsi->phy); |
| } else if (!other_dsi) { |
| ret = 0; |
| } else { |
| struct msm_dsi *master_link_dsi = IS_MASTER_DSI_LINK(id) ? |
| msm_dsi : other_dsi; |
| struct msm_dsi *slave_link_dsi = IS_MASTER_DSI_LINK(id) ? |
| other_dsi : msm_dsi; |
| /* Register slave host first, so that slave DSI device |
| * has a chance to probe, and do not block the master |
| * DSI device's probe. |
| * Also, do not check defer for the slave host, |
| * because only master DSI device adds the panel to global |
| * panel list. The panel's device is the master DSI device. |
| */ |
| ret = msm_dsi_host_register(slave_link_dsi->host, false); |
| if (ret) |
| return ret; |
| ret = msm_dsi_host_register(master_link_dsi->host, true); |
| if (ret) |
| return ret; |
| |
| /* PLL0 is to drive both 2 DSI link clocks in bonded DSI mode. */ |
| msm_dsi_phy_set_usecase(clk_master_dsi->phy, |
| MSM_DSI_PHY_MASTER); |
| msm_dsi_phy_set_usecase(clk_slave_dsi->phy, |
| MSM_DSI_PHY_SLAVE); |
| ret = msm_dsi_host_set_src_pll(msm_dsi->host, clk_master_dsi->phy); |
| if (ret) |
| return ret; |
| ret = msm_dsi_host_set_src_pll(other_dsi->host, clk_master_dsi->phy); |
| } |
| |
| return ret; |
| } |
| |
| static int enable_phy(struct msm_dsi *msm_dsi, |
| struct msm_dsi_phy_shared_timings *shared_timings) |
| { |
| struct msm_dsi_phy_clk_request clk_req; |
| int ret; |
| bool is_bonded_dsi = IS_BONDED_DSI(); |
| |
| msm_dsi_host_get_phy_clk_req(msm_dsi->host, &clk_req, is_bonded_dsi); |
| |
| ret = msm_dsi_phy_enable(msm_dsi->phy, &clk_req, shared_timings); |
| |
| return ret; |
| } |
| |
| static int |
| dsi_mgr_phy_enable(int id, |
| struct msm_dsi_phy_shared_timings shared_timings[DSI_MAX]) |
| { |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct msm_dsi *mdsi = dsi_mgr_get_dsi(DSI_CLOCK_MASTER); |
| struct msm_dsi *sdsi = dsi_mgr_get_dsi(DSI_CLOCK_SLAVE); |
| int ret; |
| |
| /* In case of bonded DSI, some registers in PHY1 have been programmed |
| * during PLL0 clock's set_rate. The PHY1 reset called by host1 here |
| * will silently reset those PHY1 registers. Therefore we need to reset |
| * and enable both PHYs before any PLL clock operation. |
| */ |
| if (IS_BONDED_DSI() && mdsi && sdsi) { |
| if (!mdsi->phy_enabled && !sdsi->phy_enabled) { |
| msm_dsi_host_reset_phy(mdsi->host); |
| msm_dsi_host_reset_phy(sdsi->host); |
| |
| ret = enable_phy(mdsi, |
| &shared_timings[DSI_CLOCK_MASTER]); |
| if (ret) |
| return ret; |
| ret = enable_phy(sdsi, |
| &shared_timings[DSI_CLOCK_SLAVE]); |
| if (ret) { |
| msm_dsi_phy_disable(mdsi->phy); |
| return ret; |
| } |
| } |
| } else { |
| msm_dsi_host_reset_phy(msm_dsi->host); |
| ret = enable_phy(msm_dsi, &shared_timings[id]); |
| if (ret) |
| return ret; |
| } |
| |
| msm_dsi->phy_enabled = true; |
| |
| return 0; |
| } |
| |
| static void dsi_mgr_phy_disable(int id) |
| { |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct msm_dsi *mdsi = dsi_mgr_get_dsi(DSI_CLOCK_MASTER); |
| struct msm_dsi *sdsi = dsi_mgr_get_dsi(DSI_CLOCK_SLAVE); |
| |
| /* disable DSI phy |
| * In bonded dsi configuration, the phy should be disabled for the |
| * first controller only when the second controller is disabled. |
| */ |
| msm_dsi->phy_enabled = false; |
| if (IS_BONDED_DSI() && mdsi && sdsi) { |
| if (!mdsi->phy_enabled && !sdsi->phy_enabled) { |
| msm_dsi_phy_disable(sdsi->phy); |
| msm_dsi_phy_disable(mdsi->phy); |
| } |
| } else { |
| msm_dsi_phy_disable(msm_dsi->phy); |
| } |
| } |
| |
| struct dsi_connector { |
| struct drm_connector base; |
| int id; |
| }; |
| |
| struct dsi_bridge { |
| struct drm_bridge base; |
| int id; |
| }; |
| |
| #define to_dsi_connector(x) container_of(x, struct dsi_connector, base) |
| #define to_dsi_bridge(x) container_of(x, struct dsi_bridge, base) |
| |
| static inline int dsi_mgr_connector_get_id(struct drm_connector *connector) |
| { |
| struct dsi_connector *dsi_connector = to_dsi_connector(connector); |
| return dsi_connector->id; |
| } |
| |
| static int dsi_mgr_bridge_get_id(struct drm_bridge *bridge) |
| { |
| struct dsi_bridge *dsi_bridge = to_dsi_bridge(bridge); |
| return dsi_bridge->id; |
| } |
| |
| static int msm_dsi_manager_panel_init(struct drm_connector *conn, u8 id) |
| { |
| struct msm_drm_private *priv = conn->dev->dev_private; |
| struct msm_kms *kms = priv->kms; |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct msm_dsi *other_dsi = dsi_mgr_get_other_dsi(id); |
| struct msm_dsi *master_dsi, *slave_dsi; |
| struct drm_panel *panel; |
| |
| if (IS_BONDED_DSI() && !IS_MASTER_DSI_LINK(id)) { |
| master_dsi = other_dsi; |
| slave_dsi = msm_dsi; |
| } else { |
| master_dsi = msm_dsi; |
| slave_dsi = other_dsi; |
| } |
| |
| /* |
| * There is only 1 panel in the global panel list for bonded DSI mode. |
| * Therefore slave dsi should get the drm_panel instance from master |
| * dsi. |
| */ |
| panel = msm_dsi_host_get_panel(master_dsi->host); |
| if (IS_ERR(panel)) { |
| DRM_ERROR("Could not find panel for %u (%ld)\n", msm_dsi->id, |
| PTR_ERR(panel)); |
| return PTR_ERR(panel); |
| } |
| |
| if (!panel || !IS_BONDED_DSI()) |
| goto out; |
| |
| drm_object_attach_property(&conn->base, |
| conn->dev->mode_config.tile_property, 0); |
| |
| /* |
| * Set split display info to kms once bonded DSI panel is connected to |
| * both hosts. |
| */ |
| if (other_dsi && other_dsi->panel && kms->funcs->set_split_display) { |
| kms->funcs->set_split_display(kms, master_dsi->encoder, |
| slave_dsi->encoder, |
| msm_dsi_is_cmd_mode(msm_dsi)); |
| } |
| |
| out: |
| msm_dsi->panel = panel; |
| return 0; |
| } |
| |
| static enum drm_connector_status dsi_mgr_connector_detect( |
| struct drm_connector *connector, bool force) |
| { |
| int id = dsi_mgr_connector_get_id(connector); |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| |
| return msm_dsi->panel ? connector_status_connected : |
| connector_status_disconnected; |
| } |
| |
| static void dsi_mgr_connector_destroy(struct drm_connector *connector) |
| { |
| struct dsi_connector *dsi_connector = to_dsi_connector(connector); |
| |
| DBG(""); |
| |
| drm_connector_cleanup(connector); |
| |
| kfree(dsi_connector); |
| } |
| |
| static int dsi_mgr_connector_get_modes(struct drm_connector *connector) |
| { |
| int id = dsi_mgr_connector_get_id(connector); |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct drm_panel *panel = msm_dsi->panel; |
| int num; |
| |
| if (!panel) |
| return 0; |
| |
| /* |
| * In bonded DSI mode, we have one connector that can be |
| * attached to the drm_panel. |
| */ |
| num = drm_panel_get_modes(panel, connector); |
| if (!num) |
| return 0; |
| |
| return num; |
| } |
| |
| static enum drm_mode_status dsi_mgr_connector_mode_valid(struct drm_connector *connector, |
| struct drm_display_mode *mode) |
| { |
| int id = dsi_mgr_connector_get_id(connector); |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct drm_encoder *encoder = msm_dsi_get_encoder(msm_dsi); |
| struct msm_drm_private *priv = connector->dev->dev_private; |
| struct msm_kms *kms = priv->kms; |
| long actual, requested; |
| |
| DBG(""); |
| requested = 1000 * mode->clock; |
| actual = kms->funcs->round_pixclk(kms, requested, encoder); |
| |
| DBG("requested=%ld, actual=%ld", requested, actual); |
| if (actual != requested) |
| return MODE_CLOCK_RANGE; |
| |
| return MODE_OK; |
| } |
| |
| static struct drm_encoder * |
| dsi_mgr_connector_best_encoder(struct drm_connector *connector) |
| { |
| int id = dsi_mgr_connector_get_id(connector); |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| |
| DBG(""); |
| return msm_dsi_get_encoder(msm_dsi); |
| } |
| |
| static void dsi_mgr_bridge_pre_enable(struct drm_bridge *bridge) |
| { |
| int id = dsi_mgr_bridge_get_id(bridge); |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct msm_dsi *msm_dsi1 = dsi_mgr_get_dsi(DSI_1); |
| struct mipi_dsi_host *host = msm_dsi->host; |
| struct drm_panel *panel = msm_dsi->panel; |
| struct msm_dsi_phy_shared_timings phy_shared_timings[DSI_MAX]; |
| bool is_bonded_dsi = IS_BONDED_DSI(); |
| int ret; |
| |
| DBG("id=%d", id); |
| if (!msm_dsi_device_connected(msm_dsi)) |
| return; |
| |
| /* Do nothing with the host if it is slave-DSI in case of bonded DSI */ |
| if (is_bonded_dsi && !IS_MASTER_DSI_LINK(id)) |
| return; |
| |
| ret = dsi_mgr_phy_enable(id, phy_shared_timings); |
| if (ret) |
| goto phy_en_fail; |
| |
| ret = msm_dsi_host_power_on(host, &phy_shared_timings[id], is_bonded_dsi, msm_dsi->phy); |
| if (ret) { |
| pr_err("%s: power on host %d failed, %d\n", __func__, id, ret); |
| goto host_on_fail; |
| } |
| |
| if (is_bonded_dsi && msm_dsi1) { |
| ret = msm_dsi_host_power_on(msm_dsi1->host, |
| &phy_shared_timings[DSI_1], is_bonded_dsi, msm_dsi1->phy); |
| if (ret) { |
| pr_err("%s: power on host1 failed, %d\n", |
| __func__, ret); |
| goto host1_on_fail; |
| } |
| } |
| |
| /* |
| * Enable before preparing the panel, disable after unpreparing, so |
| * that the panel can communicate over the DSI link. |
| */ |
| msm_dsi_host_enable_irq(host); |
| if (is_bonded_dsi && msm_dsi1) |
| msm_dsi_host_enable_irq(msm_dsi1->host); |
| |
| /* Always call panel functions once, because even for dual panels, |
| * there is only one drm_panel instance. |
| */ |
| if (panel) { |
| ret = drm_panel_prepare(panel); |
| if (ret) { |
| pr_err("%s: prepare panel %d failed, %d\n", __func__, |
| id, ret); |
| goto panel_prep_fail; |
| } |
| } |
| |
| ret = msm_dsi_host_enable(host); |
| if (ret) { |
| pr_err("%s: enable host %d failed, %d\n", __func__, id, ret); |
| goto host_en_fail; |
| } |
| |
| if (is_bonded_dsi && msm_dsi1) { |
| ret = msm_dsi_host_enable(msm_dsi1->host); |
| if (ret) { |
| pr_err("%s: enable host1 failed, %d\n", __func__, ret); |
| goto host1_en_fail; |
| } |
| } |
| |
| return; |
| |
| host1_en_fail: |
| msm_dsi_host_disable(host); |
| host_en_fail: |
| if (panel) |
| drm_panel_unprepare(panel); |
| panel_prep_fail: |
| msm_dsi_host_disable_irq(host); |
| if (is_bonded_dsi && msm_dsi1) |
| msm_dsi_host_disable_irq(msm_dsi1->host); |
| |
| if (is_bonded_dsi && msm_dsi1) |
| msm_dsi_host_power_off(msm_dsi1->host); |
| host1_on_fail: |
| msm_dsi_host_power_off(host); |
| host_on_fail: |
| dsi_mgr_phy_disable(id); |
| phy_en_fail: |
| return; |
| } |
| |
| void msm_dsi_manager_tpg_enable(void) |
| { |
| struct msm_dsi *m_dsi = dsi_mgr_get_dsi(DSI_0); |
| struct msm_dsi *s_dsi = dsi_mgr_get_dsi(DSI_1); |
| |
| /* if dual dsi, trigger tpg on master first then slave */ |
| if (m_dsi) { |
| msm_dsi_host_test_pattern_en(m_dsi->host); |
| if (IS_BONDED_DSI() && s_dsi) |
| msm_dsi_host_test_pattern_en(s_dsi->host); |
| } |
| } |
| |
| static void dsi_mgr_bridge_enable(struct drm_bridge *bridge) |
| { |
| int id = dsi_mgr_bridge_get_id(bridge); |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct drm_panel *panel = msm_dsi->panel; |
| bool is_bonded_dsi = IS_BONDED_DSI(); |
| int ret; |
| |
| DBG("id=%d", id); |
| if (!msm_dsi_device_connected(msm_dsi)) |
| return; |
| |
| /* Do nothing with the host if it is slave-DSI in case of bonded DSI */ |
| if (is_bonded_dsi && !IS_MASTER_DSI_LINK(id)) |
| return; |
| |
| if (panel) { |
| ret = drm_panel_enable(panel); |
| if (ret) { |
| pr_err("%s: enable panel %d failed, %d\n", __func__, id, |
| ret); |
| } |
| } |
| } |
| |
| static void dsi_mgr_bridge_disable(struct drm_bridge *bridge) |
| { |
| int id = dsi_mgr_bridge_get_id(bridge); |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct drm_panel *panel = msm_dsi->panel; |
| bool is_bonded_dsi = IS_BONDED_DSI(); |
| int ret; |
| |
| DBG("id=%d", id); |
| if (!msm_dsi_device_connected(msm_dsi)) |
| return; |
| |
| /* Do nothing with the host if it is slave-DSI in case of bonded DSI */ |
| if (is_bonded_dsi && !IS_MASTER_DSI_LINK(id)) |
| return; |
| |
| if (panel) { |
| ret = drm_panel_disable(panel); |
| if (ret) |
| pr_err("%s: Panel %d OFF failed, %d\n", __func__, id, |
| ret); |
| } |
| } |
| |
| static void dsi_mgr_bridge_post_disable(struct drm_bridge *bridge) |
| { |
| int id = dsi_mgr_bridge_get_id(bridge); |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct msm_dsi *msm_dsi1 = dsi_mgr_get_dsi(DSI_1); |
| struct mipi_dsi_host *host = msm_dsi->host; |
| struct drm_panel *panel = msm_dsi->panel; |
| bool is_bonded_dsi = IS_BONDED_DSI(); |
| int ret; |
| |
| DBG("id=%d", id); |
| |
| if (!msm_dsi_device_connected(msm_dsi)) |
| return; |
| |
| /* |
| * Do nothing with the host if it is slave-DSI in case of bonded DSI. |
| * It is safe to call dsi_mgr_phy_disable() here because a single PHY |
| * won't be diabled until both PHYs request disable. |
| */ |
| if (is_bonded_dsi && !IS_MASTER_DSI_LINK(id)) |
| goto disable_phy; |
| |
| ret = msm_dsi_host_disable(host); |
| if (ret) |
| pr_err("%s: host %d disable failed, %d\n", __func__, id, ret); |
| |
| if (is_bonded_dsi && msm_dsi1) { |
| ret = msm_dsi_host_disable(msm_dsi1->host); |
| if (ret) |
| pr_err("%s: host1 disable failed, %d\n", __func__, ret); |
| } |
| |
| if (panel) { |
| ret = drm_panel_unprepare(panel); |
| if (ret) |
| pr_err("%s: Panel %d unprepare failed,%d\n", __func__, |
| id, ret); |
| } |
| |
| msm_dsi_host_disable_irq(host); |
| if (is_bonded_dsi && msm_dsi1) |
| msm_dsi_host_disable_irq(msm_dsi1->host); |
| |
| /* Save PHY status if it is a clock source */ |
| msm_dsi_phy_pll_save_state(msm_dsi->phy); |
| |
| ret = msm_dsi_host_power_off(host); |
| if (ret) |
| pr_err("%s: host %d power off failed,%d\n", __func__, id, ret); |
| |
| if (is_bonded_dsi && msm_dsi1) { |
| ret = msm_dsi_host_power_off(msm_dsi1->host); |
| if (ret) |
| pr_err("%s: host1 power off failed, %d\n", |
| __func__, ret); |
| } |
| |
| disable_phy: |
| dsi_mgr_phy_disable(id); |
| } |
| |
| static void dsi_mgr_bridge_mode_set(struct drm_bridge *bridge, |
| const struct drm_display_mode *mode, |
| const struct drm_display_mode *adjusted_mode) |
| { |
| int id = dsi_mgr_bridge_get_id(bridge); |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct msm_dsi *other_dsi = dsi_mgr_get_other_dsi(id); |
| struct mipi_dsi_host *host = msm_dsi->host; |
| bool is_bonded_dsi = IS_BONDED_DSI(); |
| |
| DBG("set mode: " DRM_MODE_FMT, DRM_MODE_ARG(mode)); |
| |
| if (is_bonded_dsi && !IS_MASTER_DSI_LINK(id)) |
| return; |
| |
| msm_dsi_host_set_display_mode(host, adjusted_mode); |
| if (is_bonded_dsi && other_dsi) |
| msm_dsi_host_set_display_mode(other_dsi->host, adjusted_mode); |
| } |
| |
| static const struct drm_connector_funcs dsi_mgr_connector_funcs = { |
| .detect = dsi_mgr_connector_detect, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .destroy = dsi_mgr_connector_destroy, |
| .reset = drm_atomic_helper_connector_reset, |
| .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
| }; |
| |
| static const struct drm_connector_helper_funcs dsi_mgr_conn_helper_funcs = { |
| .get_modes = dsi_mgr_connector_get_modes, |
| .mode_valid = dsi_mgr_connector_mode_valid, |
| .best_encoder = dsi_mgr_connector_best_encoder, |
| }; |
| |
| static const struct drm_bridge_funcs dsi_mgr_bridge_funcs = { |
| .pre_enable = dsi_mgr_bridge_pre_enable, |
| .enable = dsi_mgr_bridge_enable, |
| .disable = dsi_mgr_bridge_disable, |
| .post_disable = dsi_mgr_bridge_post_disable, |
| .mode_set = dsi_mgr_bridge_mode_set, |
| }; |
| |
| /* initialize connector when we're connected to a drm_panel */ |
| struct drm_connector *msm_dsi_manager_connector_init(u8 id) |
| { |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct drm_connector *connector = NULL; |
| struct dsi_connector *dsi_connector; |
| int ret; |
| |
| dsi_connector = kzalloc(sizeof(*dsi_connector), GFP_KERNEL); |
| if (!dsi_connector) |
| return ERR_PTR(-ENOMEM); |
| |
| dsi_connector->id = id; |
| |
| connector = &dsi_connector->base; |
| |
| ret = drm_connector_init(msm_dsi->dev, connector, |
| &dsi_mgr_connector_funcs, DRM_MODE_CONNECTOR_DSI); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| drm_connector_helper_add(connector, &dsi_mgr_conn_helper_funcs); |
| |
| /* Enable HPD to let hpd event is handled |
| * when panel is attached to the host. |
| */ |
| connector->polled = DRM_CONNECTOR_POLL_HPD; |
| |
| /* Display driver doesn't support interlace now. */ |
| connector->interlace_allowed = 0; |
| connector->doublescan_allowed = 0; |
| |
| drm_connector_attach_encoder(connector, msm_dsi->encoder); |
| |
| ret = msm_dsi_manager_panel_init(connector, id); |
| if (ret) { |
| DRM_DEV_ERROR(msm_dsi->dev->dev, "init panel failed %d\n", ret); |
| goto fail; |
| } |
| |
| return connector; |
| |
| fail: |
| connector->funcs->destroy(msm_dsi->connector); |
| return ERR_PTR(ret); |
| } |
| |
| bool msm_dsi_manager_validate_current_config(u8 id) |
| { |
| bool is_bonded_dsi = IS_BONDED_DSI(); |
| |
| /* |
| * For bonded DSI, we only have one drm panel. For this |
| * use case, we register only one bridge/connector. |
| * Skip bridge/connector initialisation if it is |
| * slave-DSI for bonded DSI configuration. |
| */ |
| if (is_bonded_dsi && !IS_MASTER_DSI_LINK(id)) { |
| DBG("Skip bridge registration for slave DSI->id: %d\n", id); |
| return false; |
| } |
| return true; |
| } |
| |
| /* initialize bridge */ |
| struct drm_bridge *msm_dsi_manager_bridge_init(u8 id) |
| { |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct drm_bridge *bridge = NULL; |
| struct dsi_bridge *dsi_bridge; |
| struct drm_encoder *encoder; |
| int ret; |
| |
| dsi_bridge = devm_kzalloc(msm_dsi->dev->dev, |
| sizeof(*dsi_bridge), GFP_KERNEL); |
| if (!dsi_bridge) { |
| ret = -ENOMEM; |
| goto fail; |
| } |
| |
| dsi_bridge->id = id; |
| |
| encoder = msm_dsi->encoder; |
| |
| bridge = &dsi_bridge->base; |
| bridge->funcs = &dsi_mgr_bridge_funcs; |
| |
| ret = drm_bridge_attach(encoder, bridge, NULL, 0); |
| if (ret) |
| goto fail; |
| |
| return bridge; |
| |
| fail: |
| if (bridge) |
| msm_dsi_manager_bridge_destroy(bridge); |
| |
| return ERR_PTR(ret); |
| } |
| |
| struct drm_connector *msm_dsi_manager_ext_bridge_init(u8 id) |
| { |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct drm_device *dev = msm_dsi->dev; |
| struct drm_connector *connector; |
| struct drm_encoder *encoder; |
| struct drm_bridge *int_bridge, *ext_bridge; |
| int ret; |
| |
| int_bridge = msm_dsi->bridge; |
| ext_bridge = msm_dsi->external_bridge = |
| msm_dsi_host_get_bridge(msm_dsi->host); |
| |
| encoder = msm_dsi->encoder; |
| |
| /* |
| * Try first to create the bridge without it creating its own |
| * connector.. currently some bridges support this, and others |
| * do not (and some support both modes) |
| */ |
| ret = drm_bridge_attach(encoder, ext_bridge, int_bridge, |
| DRM_BRIDGE_ATTACH_NO_CONNECTOR); |
| if (ret == -EINVAL) { |
| struct drm_connector *connector; |
| struct list_head *connector_list; |
| |
| /* link the internal dsi bridge to the external bridge */ |
| drm_bridge_attach(encoder, ext_bridge, int_bridge, 0); |
| |
| /* |
| * we need the drm_connector created by the external bridge |
| * driver (or someone else) to feed it to our driver's |
| * priv->connector[] list, mainly for msm_fbdev_init() |
| */ |
| connector_list = &dev->mode_config.connector_list; |
| |
| list_for_each_entry(connector, connector_list, head) { |
| if (drm_connector_has_possible_encoder(connector, encoder)) |
| return connector; |
| } |
| |
| return ERR_PTR(-ENODEV); |
| } |
| |
| connector = drm_bridge_connector_init(dev, encoder); |
| if (IS_ERR(connector)) { |
| DRM_ERROR("Unable to create bridge connector\n"); |
| return ERR_CAST(connector); |
| } |
| |
| drm_connector_attach_encoder(connector, encoder); |
| |
| return connector; |
| } |
| |
| void msm_dsi_manager_bridge_destroy(struct drm_bridge *bridge) |
| { |
| } |
| |
| int msm_dsi_manager_cmd_xfer(int id, const struct mipi_dsi_msg *msg) |
| { |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct msm_dsi *msm_dsi0 = dsi_mgr_get_dsi(DSI_0); |
| struct mipi_dsi_host *host = msm_dsi->host; |
| bool is_read = (msg->rx_buf && msg->rx_len); |
| bool need_sync = (IS_SYNC_NEEDED() && !is_read); |
| int ret; |
| |
| if (!msg->tx_buf || !msg->tx_len) |
| return 0; |
| |
| /* In bonded master case, panel requires the same commands sent to |
| * both DSI links. Host issues the command trigger to both links |
| * when DSI_1 calls the cmd transfer function, no matter it happens |
| * before or after DSI_0 cmd transfer. |
| */ |
| if (need_sync && (id == DSI_0)) |
| return is_read ? msg->rx_len : msg->tx_len; |
| |
| if (need_sync && msm_dsi0) { |
| ret = msm_dsi_host_xfer_prepare(msm_dsi0->host, msg); |
| if (ret) { |
| pr_err("%s: failed to prepare non-trigger host, %d\n", |
| __func__, ret); |
| return ret; |
| } |
| } |
| ret = msm_dsi_host_xfer_prepare(host, msg); |
| if (ret) { |
| pr_err("%s: failed to prepare host, %d\n", __func__, ret); |
| goto restore_host0; |
| } |
| |
| ret = is_read ? msm_dsi_host_cmd_rx(host, msg) : |
| msm_dsi_host_cmd_tx(host, msg); |
| |
| msm_dsi_host_xfer_restore(host, msg); |
| |
| restore_host0: |
| if (need_sync && msm_dsi0) |
| msm_dsi_host_xfer_restore(msm_dsi0->host, msg); |
| |
| return ret; |
| } |
| |
| bool msm_dsi_manager_cmd_xfer_trigger(int id, u32 dma_base, u32 len) |
| { |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct msm_dsi *msm_dsi0 = dsi_mgr_get_dsi(DSI_0); |
| struct mipi_dsi_host *host = msm_dsi->host; |
| |
| if (IS_SYNC_NEEDED() && (id == DSI_0)) |
| return false; |
| |
| if (IS_SYNC_NEEDED() && msm_dsi0) |
| msm_dsi_host_cmd_xfer_commit(msm_dsi0->host, dma_base, len); |
| |
| msm_dsi_host_cmd_xfer_commit(host, dma_base, len); |
| |
| return true; |
| } |
| |
| int msm_dsi_manager_register(struct msm_dsi *msm_dsi) |
| { |
| struct msm_dsi_manager *msm_dsim = &msm_dsim_glb; |
| int id = msm_dsi->id; |
| int ret; |
| |
| if (id >= DSI_MAX) { |
| pr_err("%s: invalid id %d\n", __func__, id); |
| return -EINVAL; |
| } |
| |
| if (msm_dsim->dsi[id]) { |
| pr_err("%s: dsi%d already registered\n", __func__, id); |
| return -EBUSY; |
| } |
| |
| msm_dsim->dsi[id] = msm_dsi; |
| |
| ret = dsi_mgr_parse_of(msm_dsi->pdev->dev.of_node, id); |
| if (ret) { |
| pr_err("%s: failed to parse OF DSI info\n", __func__); |
| goto fail; |
| } |
| |
| ret = dsi_mgr_setup_components(id); |
| if (ret) { |
| pr_err("%s: failed to register mipi dsi host for DSI %d: %d\n", |
| __func__, id, ret); |
| goto fail; |
| } |
| |
| return 0; |
| |
| fail: |
| msm_dsim->dsi[id] = NULL; |
| return ret; |
| } |
| |
| void msm_dsi_manager_unregister(struct msm_dsi *msm_dsi) |
| { |
| struct msm_dsi_manager *msm_dsim = &msm_dsim_glb; |
| |
| if (msm_dsi->host) |
| msm_dsi_host_unregister(msm_dsi->host); |
| |
| if (msm_dsi->id >= 0) |
| msm_dsim->dsi[msm_dsi->id] = NULL; |
| } |
| |
| bool msm_dsi_is_bonded_dsi(struct msm_dsi *msm_dsi) |
| { |
| return IS_BONDED_DSI(); |
| } |
| |
| bool msm_dsi_is_master_dsi(struct msm_dsi *msm_dsi) |
| { |
| return IS_MASTER_DSI_LINK(msm_dsi->id); |
| } |