| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * meson-mx-sdio.c - Meson6, Meson8 and Meson8b SDIO/MMC Host Controller |
| * |
| * Copyright (C) 2015 Endless Mobile, Inc. |
| * Author: Carlo Caione <carlo@endlessm.com> |
| * Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com> |
| */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/ioport.h> |
| #include <linux/platform_device.h> |
| #include <linux/of_platform.h> |
| #include <linux/timer.h> |
| #include <linux/types.h> |
| |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/mmc.h> |
| #include <linux/mmc/sdio.h> |
| #include <linux/mmc/slot-gpio.h> |
| |
| #define MESON_MX_SDIO_ARGU 0x00 |
| |
| #define MESON_MX_SDIO_SEND 0x04 |
| #define MESON_MX_SDIO_SEND_COMMAND_INDEX_MASK GENMASK(7, 0) |
| #define MESON_MX_SDIO_SEND_CMD_RESP_BITS_MASK GENMASK(15, 8) |
| #define MESON_MX_SDIO_SEND_RESP_WITHOUT_CRC7 BIT(16) |
| #define MESON_MX_SDIO_SEND_RESP_HAS_DATA BIT(17) |
| #define MESON_MX_SDIO_SEND_RESP_CRC7_FROM_8 BIT(18) |
| #define MESON_MX_SDIO_SEND_CHECK_DAT0_BUSY BIT(19) |
| #define MESON_MX_SDIO_SEND_DATA BIT(20) |
| #define MESON_MX_SDIO_SEND_USE_INT_WINDOW BIT(21) |
| #define MESON_MX_SDIO_SEND_REPEAT_PACKAGE_TIMES_MASK GENMASK(31, 24) |
| |
| #define MESON_MX_SDIO_CONF 0x08 |
| #define MESON_MX_SDIO_CONF_CMD_CLK_DIV_SHIFT 0 |
| #define MESON_MX_SDIO_CONF_CMD_CLK_DIV_WIDTH 10 |
| #define MESON_MX_SDIO_CONF_CMD_DISABLE_CRC BIT(10) |
| #define MESON_MX_SDIO_CONF_CMD_OUT_AT_POSITIVE_EDGE BIT(11) |
| #define MESON_MX_SDIO_CONF_CMD_ARGUMENT_BITS_MASK GENMASK(17, 12) |
| #define MESON_MX_SDIO_CONF_RESP_LATCH_AT_NEGATIVE_EDGE BIT(18) |
| #define MESON_MX_SDIO_CONF_DATA_LATCH_AT_NEGATIVE_EDGE BIT(19) |
| #define MESON_MX_SDIO_CONF_BUS_WIDTH BIT(20) |
| #define MESON_MX_SDIO_CONF_M_ENDIAN_MASK GENMASK(22, 21) |
| #define MESON_MX_SDIO_CONF_WRITE_NWR_MASK GENMASK(28, 23) |
| #define MESON_MX_SDIO_CONF_WRITE_CRC_OK_STATUS_MASK GENMASK(31, 29) |
| |
| #define MESON_MX_SDIO_IRQS 0x0c |
| #define MESON_MX_SDIO_IRQS_STATUS_STATE_MACHINE_MASK GENMASK(3, 0) |
| #define MESON_MX_SDIO_IRQS_CMD_BUSY BIT(4) |
| #define MESON_MX_SDIO_IRQS_RESP_CRC7_OK BIT(5) |
| #define MESON_MX_SDIO_IRQS_DATA_READ_CRC16_OK BIT(6) |
| #define MESON_MX_SDIO_IRQS_DATA_WRITE_CRC16_OK BIT(7) |
| #define MESON_MX_SDIO_IRQS_IF_INT BIT(8) |
| #define MESON_MX_SDIO_IRQS_CMD_INT BIT(9) |
| #define MESON_MX_SDIO_IRQS_STATUS_INFO_MASK GENMASK(15, 12) |
| #define MESON_MX_SDIO_IRQS_TIMING_OUT_INT BIT(16) |
| #define MESON_MX_SDIO_IRQS_AMRISC_TIMING_OUT_INT_EN BIT(17) |
| #define MESON_MX_SDIO_IRQS_ARC_TIMING_OUT_INT_EN BIT(18) |
| #define MESON_MX_SDIO_IRQS_TIMING_OUT_COUNT_MASK GENMASK(31, 19) |
| |
| #define MESON_MX_SDIO_IRQC 0x10 |
| #define MESON_MX_SDIO_IRQC_ARC_IF_INT_EN BIT(3) |
| #define MESON_MX_SDIO_IRQC_ARC_CMD_INT_EN BIT(4) |
| #define MESON_MX_SDIO_IRQC_IF_CONFIG_MASK GENMASK(7, 6) |
| #define MESON_MX_SDIO_IRQC_FORCE_DATA_CLK BIT(8) |
| #define MESON_MX_SDIO_IRQC_FORCE_DATA_CMD BIT(9) |
| #define MESON_MX_SDIO_IRQC_FORCE_DATA_DAT_MASK GENMASK(13, 10) |
| #define MESON_MX_SDIO_IRQC_SOFT_RESET BIT(15) |
| #define MESON_MX_SDIO_IRQC_FORCE_HALT BIT(30) |
| #define MESON_MX_SDIO_IRQC_HALT_HOLE BIT(31) |
| |
| #define MESON_MX_SDIO_MULT 0x14 |
| #define MESON_MX_SDIO_MULT_PORT_SEL_MASK GENMASK(1, 0) |
| #define MESON_MX_SDIO_MULT_MEMORY_STICK_ENABLE BIT(2) |
| #define MESON_MX_SDIO_MULT_MEMORY_STICK_SCLK_ALWAYS BIT(3) |
| #define MESON_MX_SDIO_MULT_STREAM_ENABLE BIT(4) |
| #define MESON_MX_SDIO_MULT_STREAM_8BITS_MODE BIT(5) |
| #define MESON_MX_SDIO_MULT_WR_RD_OUT_INDEX BIT(8) |
| #define MESON_MX_SDIO_MULT_DAT0_DAT1_SWAPPED BIT(10) |
| #define MESON_MX_SDIO_MULT_DAT1_DAT0_SWAPPED BIT(11) |
| #define MESON_MX_SDIO_MULT_RESP_READ_INDEX_MASK GENMASK(15, 12) |
| |
| #define MESON_MX_SDIO_ADDR 0x18 |
| |
| #define MESON_MX_SDIO_EXT 0x1c |
| #define MESON_MX_SDIO_EXT_DATA_RW_NUMBER_MASK GENMASK(29, 16) |
| |
| #define MESON_MX_SDIO_BOUNCE_REQ_SIZE (128 * 1024) |
| #define MESON_MX_SDIO_RESPONSE_CRC16_BITS (16 - 1) |
| #define MESON_MX_SDIO_MAX_SLOTS 3 |
| |
| struct meson_mx_mmc_host { |
| struct device *controller_dev; |
| |
| struct clk *parent_clk; |
| struct clk *core_clk; |
| struct clk_divider cfg_div; |
| struct clk *cfg_div_clk; |
| struct clk_fixed_factor fixed_factor; |
| struct clk *fixed_factor_clk; |
| |
| void __iomem *base; |
| int irq; |
| spinlock_t irq_lock; |
| |
| struct timer_list cmd_timeout; |
| |
| unsigned int slot_id; |
| struct mmc_host *mmc; |
| |
| struct mmc_request *mrq; |
| struct mmc_command *cmd; |
| int error; |
| }; |
| |
| static void meson_mx_mmc_mask_bits(struct mmc_host *mmc, char reg, u32 mask, |
| u32 val) |
| { |
| struct meson_mx_mmc_host *host = mmc_priv(mmc); |
| u32 regval; |
| |
| regval = readl(host->base + reg); |
| regval &= ~mask; |
| regval |= (val & mask); |
| |
| writel(regval, host->base + reg); |
| } |
| |
| static void meson_mx_mmc_soft_reset(struct meson_mx_mmc_host *host) |
| { |
| writel(MESON_MX_SDIO_IRQC_SOFT_RESET, host->base + MESON_MX_SDIO_IRQC); |
| udelay(2); |
| } |
| |
| static struct mmc_command *meson_mx_mmc_get_next_cmd(struct mmc_command *cmd) |
| { |
| if (cmd->opcode == MMC_SET_BLOCK_COUNT && !cmd->error) |
| return cmd->mrq->cmd; |
| else if (mmc_op_multi(cmd->opcode) && |
| (!cmd->mrq->sbc || cmd->error || cmd->data->error)) |
| return cmd->mrq->stop; |
| else |
| return NULL; |
| } |
| |
| static void meson_mx_mmc_start_cmd(struct mmc_host *mmc, |
| struct mmc_command *cmd) |
| { |
| struct meson_mx_mmc_host *host = mmc_priv(mmc); |
| unsigned int pack_size; |
| unsigned long irqflags, timeout; |
| u32 mult, send = 0, ext = 0; |
| |
| host->cmd = cmd; |
| |
| if (cmd->busy_timeout) |
| timeout = msecs_to_jiffies(cmd->busy_timeout); |
| else |
| timeout = msecs_to_jiffies(1000); |
| |
| switch (mmc_resp_type(cmd)) { |
| case MMC_RSP_R1: |
| case MMC_RSP_R1B: |
| case MMC_RSP_R3: |
| /* 7 (CMD) + 32 (response) + 7 (CRC) -1 */ |
| send |= FIELD_PREP(MESON_MX_SDIO_SEND_CMD_RESP_BITS_MASK, 45); |
| break; |
| case MMC_RSP_R2: |
| /* 7 (CMD) + 120 (response) + 7 (CRC) -1 */ |
| send |= FIELD_PREP(MESON_MX_SDIO_SEND_CMD_RESP_BITS_MASK, 133); |
| send |= MESON_MX_SDIO_SEND_RESP_CRC7_FROM_8; |
| break; |
| default: |
| break; |
| } |
| |
| if (!(cmd->flags & MMC_RSP_CRC)) |
| send |= MESON_MX_SDIO_SEND_RESP_WITHOUT_CRC7; |
| |
| if (cmd->flags & MMC_RSP_BUSY) |
| send |= MESON_MX_SDIO_SEND_CHECK_DAT0_BUSY; |
| |
| if (cmd->data) { |
| send |= FIELD_PREP(MESON_MX_SDIO_SEND_REPEAT_PACKAGE_TIMES_MASK, |
| (cmd->data->blocks - 1)); |
| |
| pack_size = cmd->data->blksz * BITS_PER_BYTE; |
| if (mmc->ios.bus_width == MMC_BUS_WIDTH_4) |
| pack_size += MESON_MX_SDIO_RESPONSE_CRC16_BITS * 4; |
| else |
| pack_size += MESON_MX_SDIO_RESPONSE_CRC16_BITS * 1; |
| |
| ext |= FIELD_PREP(MESON_MX_SDIO_EXT_DATA_RW_NUMBER_MASK, |
| pack_size); |
| |
| if (cmd->data->flags & MMC_DATA_WRITE) |
| send |= MESON_MX_SDIO_SEND_DATA; |
| else |
| send |= MESON_MX_SDIO_SEND_RESP_HAS_DATA; |
| |
| cmd->data->bytes_xfered = 0; |
| } |
| |
| send |= FIELD_PREP(MESON_MX_SDIO_SEND_COMMAND_INDEX_MASK, |
| (0x40 | cmd->opcode)); |
| |
| spin_lock_irqsave(&host->irq_lock, irqflags); |
| |
| mult = readl(host->base + MESON_MX_SDIO_MULT); |
| mult &= ~MESON_MX_SDIO_MULT_PORT_SEL_MASK; |
| mult |= FIELD_PREP(MESON_MX_SDIO_MULT_PORT_SEL_MASK, host->slot_id); |
| mult |= BIT(31); |
| writel(mult, host->base + MESON_MX_SDIO_MULT); |
| |
| /* enable the CMD done interrupt */ |
| meson_mx_mmc_mask_bits(mmc, MESON_MX_SDIO_IRQC, |
| MESON_MX_SDIO_IRQC_ARC_CMD_INT_EN, |
| MESON_MX_SDIO_IRQC_ARC_CMD_INT_EN); |
| |
| /* clear pending interrupts */ |
| meson_mx_mmc_mask_bits(mmc, MESON_MX_SDIO_IRQS, |
| MESON_MX_SDIO_IRQS_CMD_INT, |
| MESON_MX_SDIO_IRQS_CMD_INT); |
| |
| writel(cmd->arg, host->base + MESON_MX_SDIO_ARGU); |
| writel(ext, host->base + MESON_MX_SDIO_EXT); |
| writel(send, host->base + MESON_MX_SDIO_SEND); |
| |
| spin_unlock_irqrestore(&host->irq_lock, irqflags); |
| |
| mod_timer(&host->cmd_timeout, jiffies + timeout); |
| } |
| |
| static void meson_mx_mmc_request_done(struct meson_mx_mmc_host *host) |
| { |
| struct mmc_request *mrq; |
| |
| mrq = host->mrq; |
| |
| if (host->cmd->error) |
| meson_mx_mmc_soft_reset(host); |
| |
| host->mrq = NULL; |
| host->cmd = NULL; |
| |
| mmc_request_done(host->mmc, mrq); |
| } |
| |
| static void meson_mx_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) |
| { |
| struct meson_mx_mmc_host *host = mmc_priv(mmc); |
| unsigned short vdd = ios->vdd; |
| unsigned long clk_rate = ios->clock; |
| |
| switch (ios->bus_width) { |
| case MMC_BUS_WIDTH_1: |
| meson_mx_mmc_mask_bits(mmc, MESON_MX_SDIO_CONF, |
| MESON_MX_SDIO_CONF_BUS_WIDTH, 0); |
| break; |
| |
| case MMC_BUS_WIDTH_4: |
| meson_mx_mmc_mask_bits(mmc, MESON_MX_SDIO_CONF, |
| MESON_MX_SDIO_CONF_BUS_WIDTH, |
| MESON_MX_SDIO_CONF_BUS_WIDTH); |
| break; |
| |
| case MMC_BUS_WIDTH_8: |
| default: |
| dev_err(mmc_dev(mmc), "unsupported bus width: %d\n", |
| ios->bus_width); |
| host->error = -EINVAL; |
| return; |
| } |
| |
| host->error = clk_set_rate(host->cfg_div_clk, ios->clock); |
| if (host->error) { |
| dev_warn(mmc_dev(mmc), |
| "failed to set MMC clock to %lu: %d\n", |
| clk_rate, host->error); |
| return; |
| } |
| |
| mmc->actual_clock = clk_get_rate(host->cfg_div_clk); |
| |
| switch (ios->power_mode) { |
| case MMC_POWER_OFF: |
| vdd = 0; |
| fallthrough; |
| case MMC_POWER_UP: |
| if (!IS_ERR(mmc->supply.vmmc)) { |
| host->error = mmc_regulator_set_ocr(mmc, |
| mmc->supply.vmmc, |
| vdd); |
| if (host->error) |
| return; |
| } |
| break; |
| } |
| } |
| |
| static int meson_mx_mmc_map_dma(struct mmc_host *mmc, struct mmc_request *mrq) |
| { |
| struct mmc_data *data = mrq->data; |
| int dma_len; |
| struct scatterlist *sg; |
| |
| if (!data) |
| return 0; |
| |
| sg = data->sg; |
| if (sg->offset & 3 || sg->length & 3) { |
| dev_err(mmc_dev(mmc), |
| "unaligned scatterlist: offset %x length %d\n", |
| sg->offset, sg->length); |
| return -EINVAL; |
| } |
| |
| dma_len = dma_map_sg(mmc_dev(mmc), data->sg, data->sg_len, |
| mmc_get_dma_dir(data)); |
| if (dma_len <= 0) { |
| dev_err(mmc_dev(mmc), "dma_map_sg failed\n"); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| static void meson_mx_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) |
| { |
| struct meson_mx_mmc_host *host = mmc_priv(mmc); |
| struct mmc_command *cmd = mrq->cmd; |
| |
| if (!host->error) |
| host->error = meson_mx_mmc_map_dma(mmc, mrq); |
| |
| if (host->error) { |
| cmd->error = host->error; |
| mmc_request_done(mmc, mrq); |
| return; |
| } |
| |
| host->mrq = mrq; |
| |
| if (mrq->data) |
| writel(sg_dma_address(mrq->data->sg), |
| host->base + MESON_MX_SDIO_ADDR); |
| |
| if (mrq->sbc) |
| meson_mx_mmc_start_cmd(mmc, mrq->sbc); |
| else |
| meson_mx_mmc_start_cmd(mmc, mrq->cmd); |
| } |
| |
| static void meson_mx_mmc_read_response(struct mmc_host *mmc, |
| struct mmc_command *cmd) |
| { |
| struct meson_mx_mmc_host *host = mmc_priv(mmc); |
| u32 mult; |
| int i, resp[4]; |
| |
| mult = readl(host->base + MESON_MX_SDIO_MULT); |
| mult |= MESON_MX_SDIO_MULT_WR_RD_OUT_INDEX; |
| mult &= ~MESON_MX_SDIO_MULT_RESP_READ_INDEX_MASK; |
| mult |= FIELD_PREP(MESON_MX_SDIO_MULT_RESP_READ_INDEX_MASK, 0); |
| writel(mult, host->base + MESON_MX_SDIO_MULT); |
| |
| if (cmd->flags & MMC_RSP_136) { |
| for (i = 0; i <= 3; i++) |
| resp[3 - i] = readl(host->base + MESON_MX_SDIO_ARGU); |
| cmd->resp[0] = (resp[0] << 8) | ((resp[1] >> 24) & 0xff); |
| cmd->resp[1] = (resp[1] << 8) | ((resp[2] >> 24) & 0xff); |
| cmd->resp[2] = (resp[2] << 8) | ((resp[3] >> 24) & 0xff); |
| cmd->resp[3] = (resp[3] << 8); |
| } else if (cmd->flags & MMC_RSP_PRESENT) { |
| cmd->resp[0] = readl(host->base + MESON_MX_SDIO_ARGU); |
| } |
| } |
| |
| static irqreturn_t meson_mx_mmc_process_cmd_irq(struct meson_mx_mmc_host *host, |
| u32 irqs, u32 send) |
| { |
| struct mmc_command *cmd = host->cmd; |
| |
| /* |
| * NOTE: even though it shouldn't happen we sometimes get command |
| * interrupts twice (at least this is what it looks like). Ideally |
| * we find out why this happens and warn here as soon as it occurs. |
| */ |
| if (!cmd) |
| return IRQ_HANDLED; |
| |
| cmd->error = 0; |
| meson_mx_mmc_read_response(host->mmc, cmd); |
| |
| if (cmd->data) { |
| if (!((irqs & MESON_MX_SDIO_IRQS_DATA_READ_CRC16_OK) || |
| (irqs & MESON_MX_SDIO_IRQS_DATA_WRITE_CRC16_OK))) |
| cmd->error = -EILSEQ; |
| } else { |
| if (!((irqs & MESON_MX_SDIO_IRQS_RESP_CRC7_OK) || |
| (send & MESON_MX_SDIO_SEND_RESP_WITHOUT_CRC7))) |
| cmd->error = -EILSEQ; |
| } |
| |
| return IRQ_WAKE_THREAD; |
| } |
| |
| static irqreturn_t meson_mx_mmc_irq(int irq, void *data) |
| { |
| struct meson_mx_mmc_host *host = (void *) data; |
| u32 irqs, send; |
| irqreturn_t ret; |
| |
| spin_lock(&host->irq_lock); |
| |
| irqs = readl(host->base + MESON_MX_SDIO_IRQS); |
| send = readl(host->base + MESON_MX_SDIO_SEND); |
| |
| if (irqs & MESON_MX_SDIO_IRQS_CMD_INT) |
| ret = meson_mx_mmc_process_cmd_irq(host, irqs, send); |
| else |
| ret = IRQ_HANDLED; |
| |
| /* finally ACK all pending interrupts */ |
| writel(irqs, host->base + MESON_MX_SDIO_IRQS); |
| |
| spin_unlock(&host->irq_lock); |
| |
| return ret; |
| } |
| |
| static irqreturn_t meson_mx_mmc_irq_thread(int irq, void *irq_data) |
| { |
| struct meson_mx_mmc_host *host = (void *) irq_data; |
| struct mmc_command *cmd = host->cmd, *next_cmd; |
| |
| if (WARN_ON(!cmd)) |
| return IRQ_HANDLED; |
| |
| del_timer_sync(&host->cmd_timeout); |
| |
| if (cmd->data) { |
| dma_unmap_sg(mmc_dev(host->mmc), cmd->data->sg, |
| cmd->data->sg_len, |
| mmc_get_dma_dir(cmd->data)); |
| |
| cmd->data->bytes_xfered = cmd->data->blksz * cmd->data->blocks; |
| } |
| |
| next_cmd = meson_mx_mmc_get_next_cmd(cmd); |
| if (next_cmd) |
| meson_mx_mmc_start_cmd(host->mmc, next_cmd); |
| else |
| meson_mx_mmc_request_done(host); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void meson_mx_mmc_timeout(struct timer_list *t) |
| { |
| struct meson_mx_mmc_host *host = from_timer(host, t, cmd_timeout); |
| unsigned long irqflags; |
| u32 irqc; |
| |
| spin_lock_irqsave(&host->irq_lock, irqflags); |
| |
| /* disable the CMD interrupt */ |
| irqc = readl(host->base + MESON_MX_SDIO_IRQC); |
| irqc &= ~MESON_MX_SDIO_IRQC_ARC_CMD_INT_EN; |
| writel(irqc, host->base + MESON_MX_SDIO_IRQC); |
| |
| spin_unlock_irqrestore(&host->irq_lock, irqflags); |
| |
| /* |
| * skip the timeout handling if the interrupt handler already processed |
| * the command. |
| */ |
| if (!host->cmd) |
| return; |
| |
| dev_dbg(mmc_dev(host->mmc), |
| "Timeout on CMD%u (IRQS = 0x%08x, ARGU = 0x%08x)\n", |
| host->cmd->opcode, readl(host->base + MESON_MX_SDIO_IRQS), |
| readl(host->base + MESON_MX_SDIO_ARGU)); |
| |
| host->cmd->error = -ETIMEDOUT; |
| |
| meson_mx_mmc_request_done(host); |
| } |
| |
| static struct mmc_host_ops meson_mx_mmc_ops = { |
| .request = meson_mx_mmc_request, |
| .set_ios = meson_mx_mmc_set_ios, |
| .get_cd = mmc_gpio_get_cd, |
| .get_ro = mmc_gpio_get_ro, |
| }; |
| |
| static struct platform_device *meson_mx_mmc_slot_pdev(struct device *parent) |
| { |
| struct device_node *slot_node; |
| struct platform_device *pdev; |
| |
| /* |
| * TODO: the MMC core framework currently does not support |
| * controllers with multiple slots properly. So we only register |
| * the first slot for now |
| */ |
| slot_node = of_get_compatible_child(parent->of_node, "mmc-slot"); |
| if (!slot_node) { |
| dev_warn(parent, "no 'mmc-slot' sub-node found\n"); |
| return ERR_PTR(-ENOENT); |
| } |
| |
| pdev = of_platform_device_create(slot_node, NULL, parent); |
| of_node_put(slot_node); |
| |
| return pdev; |
| } |
| |
| static int meson_mx_mmc_add_host(struct meson_mx_mmc_host *host) |
| { |
| struct mmc_host *mmc = host->mmc; |
| struct device *slot_dev = mmc_dev(mmc); |
| int ret; |
| |
| if (of_property_read_u32(slot_dev->of_node, "reg", &host->slot_id)) { |
| dev_err(slot_dev, "missing 'reg' property\n"); |
| return -EINVAL; |
| } |
| |
| if (host->slot_id >= MESON_MX_SDIO_MAX_SLOTS) { |
| dev_err(slot_dev, "invalid 'reg' property value %d\n", |
| host->slot_id); |
| return -EINVAL; |
| } |
| |
| /* Get regulators and the supported OCR mask */ |
| ret = mmc_regulator_get_supply(mmc); |
| if (ret) |
| return ret; |
| |
| mmc->max_req_size = MESON_MX_SDIO_BOUNCE_REQ_SIZE; |
| mmc->max_seg_size = mmc->max_req_size; |
| mmc->max_blk_count = |
| FIELD_GET(MESON_MX_SDIO_SEND_REPEAT_PACKAGE_TIMES_MASK, |
| 0xffffffff); |
| mmc->max_blk_size = FIELD_GET(MESON_MX_SDIO_EXT_DATA_RW_NUMBER_MASK, |
| 0xffffffff); |
| mmc->max_blk_size -= (4 * MESON_MX_SDIO_RESPONSE_CRC16_BITS); |
| mmc->max_blk_size /= BITS_PER_BYTE; |
| |
| /* Get the min and max supported clock rates */ |
| mmc->f_min = clk_round_rate(host->cfg_div_clk, 1); |
| mmc->f_max = clk_round_rate(host->cfg_div_clk, |
| clk_get_rate(host->parent_clk)); |
| |
| mmc->caps |= MMC_CAP_CMD23 | MMC_CAP_WAIT_WHILE_BUSY; |
| mmc->ops = &meson_mx_mmc_ops; |
| |
| ret = mmc_of_parse(mmc); |
| if (ret) |
| return ret; |
| |
| ret = mmc_add_host(mmc); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int meson_mx_mmc_register_clks(struct meson_mx_mmc_host *host) |
| { |
| struct clk_init_data init; |
| const char *clk_div_parent, *clk_fixed_factor_parent; |
| |
| clk_fixed_factor_parent = __clk_get_name(host->parent_clk); |
| init.name = devm_kasprintf(host->controller_dev, GFP_KERNEL, |
| "%s#fixed_factor", |
| dev_name(host->controller_dev)); |
| if (!init.name) |
| return -ENOMEM; |
| |
| init.ops = &clk_fixed_factor_ops; |
| init.flags = 0; |
| init.parent_names = &clk_fixed_factor_parent; |
| init.num_parents = 1; |
| host->fixed_factor.div = 2; |
| host->fixed_factor.mult = 1; |
| host->fixed_factor.hw.init = &init; |
| |
| host->fixed_factor_clk = devm_clk_register(host->controller_dev, |
| &host->fixed_factor.hw); |
| if (WARN_ON(IS_ERR(host->fixed_factor_clk))) |
| return PTR_ERR(host->fixed_factor_clk); |
| |
| clk_div_parent = __clk_get_name(host->fixed_factor_clk); |
| init.name = devm_kasprintf(host->controller_dev, GFP_KERNEL, |
| "%s#div", dev_name(host->controller_dev)); |
| if (!init.name) |
| return -ENOMEM; |
| |
| init.ops = &clk_divider_ops; |
| init.flags = CLK_SET_RATE_PARENT; |
| init.parent_names = &clk_div_parent; |
| init.num_parents = 1; |
| host->cfg_div.reg = host->base + MESON_MX_SDIO_CONF; |
| host->cfg_div.shift = MESON_MX_SDIO_CONF_CMD_CLK_DIV_SHIFT; |
| host->cfg_div.width = MESON_MX_SDIO_CONF_CMD_CLK_DIV_WIDTH; |
| host->cfg_div.hw.init = &init; |
| host->cfg_div.flags = CLK_DIVIDER_ALLOW_ZERO; |
| |
| host->cfg_div_clk = devm_clk_register(host->controller_dev, |
| &host->cfg_div.hw); |
| if (WARN_ON(IS_ERR(host->cfg_div_clk))) |
| return PTR_ERR(host->cfg_div_clk); |
| |
| return 0; |
| } |
| |
| static int meson_mx_mmc_probe(struct platform_device *pdev) |
| { |
| struct platform_device *slot_pdev; |
| struct mmc_host *mmc; |
| struct meson_mx_mmc_host *host; |
| int ret, irq; |
| u32 conf; |
| |
| slot_pdev = meson_mx_mmc_slot_pdev(&pdev->dev); |
| if (!slot_pdev) |
| return -ENODEV; |
| else if (IS_ERR(slot_pdev)) |
| return PTR_ERR(slot_pdev); |
| |
| mmc = mmc_alloc_host(sizeof(*host), &slot_pdev->dev); |
| if (!mmc) { |
| ret = -ENOMEM; |
| goto error_unregister_slot_pdev; |
| } |
| |
| host = mmc_priv(mmc); |
| host->mmc = mmc; |
| host->controller_dev = &pdev->dev; |
| |
| spin_lock_init(&host->irq_lock); |
| timer_setup(&host->cmd_timeout, meson_mx_mmc_timeout, 0); |
| |
| platform_set_drvdata(pdev, host); |
| |
| host->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(host->base)) { |
| ret = PTR_ERR(host->base); |
| goto error_free_mmc; |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| ret = devm_request_threaded_irq(host->controller_dev, irq, |
| meson_mx_mmc_irq, |
| meson_mx_mmc_irq_thread, IRQF_ONESHOT, |
| NULL, host); |
| if (ret) |
| goto error_free_mmc; |
| |
| host->core_clk = devm_clk_get(host->controller_dev, "core"); |
| if (IS_ERR(host->core_clk)) { |
| ret = PTR_ERR(host->core_clk); |
| goto error_free_mmc; |
| } |
| |
| host->parent_clk = devm_clk_get(host->controller_dev, "clkin"); |
| if (IS_ERR(host->parent_clk)) { |
| ret = PTR_ERR(host->parent_clk); |
| goto error_free_mmc; |
| } |
| |
| ret = meson_mx_mmc_register_clks(host); |
| if (ret) |
| goto error_free_mmc; |
| |
| ret = clk_prepare_enable(host->core_clk); |
| if (ret) { |
| dev_err(host->controller_dev, "Failed to enable core clock\n"); |
| goto error_free_mmc; |
| } |
| |
| ret = clk_prepare_enable(host->cfg_div_clk); |
| if (ret) { |
| dev_err(host->controller_dev, "Failed to enable MMC clock\n"); |
| goto error_disable_core_clk; |
| } |
| |
| conf = 0; |
| conf |= FIELD_PREP(MESON_MX_SDIO_CONF_CMD_ARGUMENT_BITS_MASK, 39); |
| conf |= FIELD_PREP(MESON_MX_SDIO_CONF_M_ENDIAN_MASK, 0x3); |
| conf |= FIELD_PREP(MESON_MX_SDIO_CONF_WRITE_NWR_MASK, 0x2); |
| conf |= FIELD_PREP(MESON_MX_SDIO_CONF_WRITE_CRC_OK_STATUS_MASK, 0x2); |
| writel(conf, host->base + MESON_MX_SDIO_CONF); |
| |
| meson_mx_mmc_soft_reset(host); |
| |
| ret = meson_mx_mmc_add_host(host); |
| if (ret) |
| goto error_disable_clks; |
| |
| return 0; |
| |
| error_disable_clks: |
| clk_disable_unprepare(host->cfg_div_clk); |
| error_disable_core_clk: |
| clk_disable_unprepare(host->core_clk); |
| error_free_mmc: |
| mmc_free_host(mmc); |
| error_unregister_slot_pdev: |
| of_platform_device_destroy(&slot_pdev->dev, NULL); |
| return ret; |
| } |
| |
| static int meson_mx_mmc_remove(struct platform_device *pdev) |
| { |
| struct meson_mx_mmc_host *host = platform_get_drvdata(pdev); |
| struct device *slot_dev = mmc_dev(host->mmc); |
| |
| del_timer_sync(&host->cmd_timeout); |
| |
| mmc_remove_host(host->mmc); |
| |
| of_platform_device_destroy(slot_dev, NULL); |
| |
| clk_disable_unprepare(host->cfg_div_clk); |
| clk_disable_unprepare(host->core_clk); |
| |
| mmc_free_host(host->mmc); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id meson_mx_mmc_of_match[] = { |
| { .compatible = "amlogic,meson8-sdio", }, |
| { .compatible = "amlogic,meson8b-sdio", }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, meson_mx_mmc_of_match); |
| |
| static struct platform_driver meson_mx_mmc_driver = { |
| .probe = meson_mx_mmc_probe, |
| .remove = meson_mx_mmc_remove, |
| .driver = { |
| .name = "meson-mx-sdio", |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| .of_match_table = of_match_ptr(meson_mx_mmc_of_match), |
| }, |
| }; |
| |
| module_platform_driver(meson_mx_mmc_driver); |
| |
| MODULE_DESCRIPTION("Meson6, Meson8 and Meson8b SDIO/MMC Host Driver"); |
| MODULE_AUTHOR("Carlo Caione <carlo@endlessm.com>"); |
| MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>"); |
| MODULE_LICENSE("GPL v2"); |