| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Intel MAX10 Board Management Controller Secure Update Driver |
| * |
| * Copyright (C) 2019-2022 Intel Corporation. All rights reserved. |
| * |
| */ |
| #include <linux/bitfield.h> |
| #include <linux/device.h> |
| #include <linux/firmware.h> |
| #include <linux/mfd/intel-m10-bmc.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| |
| struct m10bmc_sec { |
| struct device *dev; |
| struct intel_m10bmc *m10bmc; |
| struct fw_upload *fwl; |
| char *fw_name; |
| u32 fw_name_id; |
| bool cancel_request; |
| }; |
| |
| static DEFINE_XARRAY_ALLOC(fw_upload_xa); |
| |
| /* Root Entry Hash (REH) support */ |
| #define REH_SHA256_SIZE 32 |
| #define REH_SHA384_SIZE 48 |
| #define REH_MAGIC GENMASK(15, 0) |
| #define REH_SHA_NUM_BYTES GENMASK(31, 16) |
| |
| static ssize_t |
| show_root_entry_hash(struct device *dev, u32 exp_magic, |
| u32 prog_addr, u32 reh_addr, char *buf) |
| { |
| struct m10bmc_sec *sec = dev_get_drvdata(dev); |
| int sha_num_bytes, i, ret, cnt = 0; |
| u8 hash[REH_SHA384_SIZE]; |
| unsigned int stride; |
| u32 magic; |
| |
| stride = regmap_get_reg_stride(sec->m10bmc->regmap); |
| ret = m10bmc_raw_read(sec->m10bmc, prog_addr, &magic); |
| if (ret) |
| return ret; |
| |
| if (FIELD_GET(REH_MAGIC, magic) != exp_magic) |
| return sysfs_emit(buf, "hash not programmed\n"); |
| |
| sha_num_bytes = FIELD_GET(REH_SHA_NUM_BYTES, magic) / 8; |
| if ((sha_num_bytes % stride) || |
| (sha_num_bytes != REH_SHA256_SIZE && |
| sha_num_bytes != REH_SHA384_SIZE)) { |
| dev_err(sec->dev, "%s bad sha num bytes %d\n", __func__, |
| sha_num_bytes); |
| return -EINVAL; |
| } |
| |
| ret = regmap_bulk_read(sec->m10bmc->regmap, reh_addr, |
| hash, sha_num_bytes / stride); |
| if (ret) { |
| dev_err(dev, "failed to read root entry hash: %x cnt %x: %d\n", |
| reh_addr, sha_num_bytes / stride, ret); |
| return ret; |
| } |
| |
| for (i = 0; i < sha_num_bytes; i++) |
| cnt += sprintf(buf + cnt, "%02x", hash[i]); |
| cnt += sprintf(buf + cnt, "\n"); |
| |
| return cnt; |
| } |
| |
| #define DEVICE_ATTR_SEC_REH_RO(_name, _magic, _prog_addr, _reh_addr) \ |
| static ssize_t _name##_root_entry_hash_show(struct device *dev, \ |
| struct device_attribute *attr, \ |
| char *buf) \ |
| { return show_root_entry_hash(dev, _magic, _prog_addr, _reh_addr, buf); } \ |
| static DEVICE_ATTR_RO(_name##_root_entry_hash) |
| |
| DEVICE_ATTR_SEC_REH_RO(bmc, BMC_PROG_MAGIC, BMC_PROG_ADDR, BMC_REH_ADDR); |
| DEVICE_ATTR_SEC_REH_RO(sr, SR_PROG_MAGIC, SR_PROG_ADDR, SR_REH_ADDR); |
| DEVICE_ATTR_SEC_REH_RO(pr, PR_PROG_MAGIC, PR_PROG_ADDR, PR_REH_ADDR); |
| |
| #define CSK_BIT_LEN 128U |
| #define CSK_32ARRAY_SIZE DIV_ROUND_UP(CSK_BIT_LEN, 32) |
| |
| static ssize_t |
| show_canceled_csk(struct device *dev, u32 addr, char *buf) |
| { |
| unsigned int i, stride, size = CSK_32ARRAY_SIZE * sizeof(u32); |
| struct m10bmc_sec *sec = dev_get_drvdata(dev); |
| DECLARE_BITMAP(csk_map, CSK_BIT_LEN); |
| __le32 csk_le32[CSK_32ARRAY_SIZE]; |
| u32 csk32[CSK_32ARRAY_SIZE]; |
| int ret; |
| |
| stride = regmap_get_reg_stride(sec->m10bmc->regmap); |
| if (size % stride) { |
| dev_err(sec->dev, |
| "CSK vector size (0x%x) not aligned to stride (0x%x)\n", |
| size, stride); |
| WARN_ON_ONCE(1); |
| return -EINVAL; |
| } |
| |
| ret = regmap_bulk_read(sec->m10bmc->regmap, addr, csk_le32, |
| size / stride); |
| if (ret) { |
| dev_err(sec->dev, "failed to read CSK vector: %x cnt %x: %d\n", |
| addr, size / stride, ret); |
| return ret; |
| } |
| |
| for (i = 0; i < CSK_32ARRAY_SIZE; i++) |
| csk32[i] = le32_to_cpu(((csk_le32[i]))); |
| |
| bitmap_from_arr32(csk_map, csk32, CSK_BIT_LEN); |
| bitmap_complement(csk_map, csk_map, CSK_BIT_LEN); |
| return bitmap_print_to_pagebuf(1, buf, csk_map, CSK_BIT_LEN); |
| } |
| |
| #define DEVICE_ATTR_SEC_CSK_RO(_name, _addr) \ |
| static ssize_t _name##_canceled_csks_show(struct device *dev, \ |
| struct device_attribute *attr, \ |
| char *buf) \ |
| { return show_canceled_csk(dev, _addr, buf); } \ |
| static DEVICE_ATTR_RO(_name##_canceled_csks) |
| |
| #define CSK_VEC_OFFSET 0x34 |
| |
| DEVICE_ATTR_SEC_CSK_RO(bmc, BMC_PROG_ADDR + CSK_VEC_OFFSET); |
| DEVICE_ATTR_SEC_CSK_RO(sr, SR_PROG_ADDR + CSK_VEC_OFFSET); |
| DEVICE_ATTR_SEC_CSK_RO(pr, PR_PROG_ADDR + CSK_VEC_OFFSET); |
| |
| #define FLASH_COUNT_SIZE 4096 /* count stored as inverted bit vector */ |
| |
| static ssize_t flash_count_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct m10bmc_sec *sec = dev_get_drvdata(dev); |
| unsigned int stride, num_bits; |
| u8 *flash_buf; |
| int cnt, ret; |
| |
| stride = regmap_get_reg_stride(sec->m10bmc->regmap); |
| num_bits = FLASH_COUNT_SIZE * 8; |
| |
| flash_buf = kmalloc(FLASH_COUNT_SIZE, GFP_KERNEL); |
| if (!flash_buf) |
| return -ENOMEM; |
| |
| if (FLASH_COUNT_SIZE % stride) { |
| dev_err(sec->dev, |
| "FLASH_COUNT_SIZE (0x%x) not aligned to stride (0x%x)\n", |
| FLASH_COUNT_SIZE, stride); |
| WARN_ON_ONCE(1); |
| return -EINVAL; |
| } |
| |
| ret = regmap_bulk_read(sec->m10bmc->regmap, STAGING_FLASH_COUNT, |
| flash_buf, FLASH_COUNT_SIZE / stride); |
| if (ret) { |
| dev_err(sec->dev, |
| "failed to read flash count: %x cnt %x: %d\n", |
| STAGING_FLASH_COUNT, FLASH_COUNT_SIZE / stride, ret); |
| goto exit_free; |
| } |
| cnt = num_bits - bitmap_weight((unsigned long *)flash_buf, num_bits); |
| |
| exit_free: |
| kfree(flash_buf); |
| |
| return ret ? : sysfs_emit(buf, "%u\n", cnt); |
| } |
| static DEVICE_ATTR_RO(flash_count); |
| |
| static struct attribute *m10bmc_security_attrs[] = { |
| &dev_attr_flash_count.attr, |
| &dev_attr_bmc_root_entry_hash.attr, |
| &dev_attr_sr_root_entry_hash.attr, |
| &dev_attr_pr_root_entry_hash.attr, |
| &dev_attr_sr_canceled_csks.attr, |
| &dev_attr_pr_canceled_csks.attr, |
| &dev_attr_bmc_canceled_csks.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group m10bmc_security_attr_group = { |
| .name = "security", |
| .attrs = m10bmc_security_attrs, |
| }; |
| |
| static const struct attribute_group *m10bmc_sec_attr_groups[] = { |
| &m10bmc_security_attr_group, |
| NULL, |
| }; |
| |
| static void log_error_regs(struct m10bmc_sec *sec, u32 doorbell) |
| { |
| u32 auth_result; |
| |
| dev_err(sec->dev, "RSU error status: 0x%08x\n", doorbell); |
| |
| if (!m10bmc_sys_read(sec->m10bmc, M10BMC_AUTH_RESULT, &auth_result)) |
| dev_err(sec->dev, "RSU auth result: 0x%08x\n", auth_result); |
| } |
| |
| static enum fw_upload_err rsu_check_idle(struct m10bmc_sec *sec) |
| { |
| u32 doorbell; |
| int ret; |
| |
| ret = m10bmc_sys_read(sec->m10bmc, M10BMC_DOORBELL, &doorbell); |
| if (ret) |
| return FW_UPLOAD_ERR_RW_ERROR; |
| |
| if (rsu_prog(doorbell) != RSU_PROG_IDLE && |
| rsu_prog(doorbell) != RSU_PROG_RSU_DONE) { |
| log_error_regs(sec, doorbell); |
| return FW_UPLOAD_ERR_BUSY; |
| } |
| |
| return FW_UPLOAD_ERR_NONE; |
| } |
| |
| static inline bool rsu_start_done(u32 doorbell) |
| { |
| u32 status, progress; |
| |
| if (doorbell & DRBL_RSU_REQUEST) |
| return false; |
| |
| status = rsu_stat(doorbell); |
| if (status == RSU_STAT_ERASE_FAIL || status == RSU_STAT_WEAROUT) |
| return true; |
| |
| progress = rsu_prog(doorbell); |
| if (progress != RSU_PROG_IDLE && progress != RSU_PROG_RSU_DONE) |
| return true; |
| |
| return false; |
| } |
| |
| static enum fw_upload_err rsu_update_init(struct m10bmc_sec *sec) |
| { |
| u32 doorbell, status; |
| int ret; |
| |
| ret = regmap_update_bits(sec->m10bmc->regmap, |
| M10BMC_SYS_BASE + M10BMC_DOORBELL, |
| DRBL_RSU_REQUEST | DRBL_HOST_STATUS, |
| DRBL_RSU_REQUEST | |
| FIELD_PREP(DRBL_HOST_STATUS, |
| HOST_STATUS_IDLE)); |
| if (ret) |
| return FW_UPLOAD_ERR_RW_ERROR; |
| |
| ret = regmap_read_poll_timeout(sec->m10bmc->regmap, |
| M10BMC_SYS_BASE + M10BMC_DOORBELL, |
| doorbell, |
| rsu_start_done(doorbell), |
| NIOS_HANDSHAKE_INTERVAL_US, |
| NIOS_HANDSHAKE_TIMEOUT_US); |
| |
| if (ret == -ETIMEDOUT) { |
| log_error_regs(sec, doorbell); |
| return FW_UPLOAD_ERR_TIMEOUT; |
| } else if (ret) { |
| return FW_UPLOAD_ERR_RW_ERROR; |
| } |
| |
| status = rsu_stat(doorbell); |
| if (status == RSU_STAT_WEAROUT) { |
| dev_warn(sec->dev, "Excessive flash update count detected\n"); |
| return FW_UPLOAD_ERR_WEAROUT; |
| } else if (status == RSU_STAT_ERASE_FAIL) { |
| log_error_regs(sec, doorbell); |
| return FW_UPLOAD_ERR_HW_ERROR; |
| } |
| |
| return FW_UPLOAD_ERR_NONE; |
| } |
| |
| static enum fw_upload_err rsu_prog_ready(struct m10bmc_sec *sec) |
| { |
| unsigned long poll_timeout; |
| u32 doorbell, progress; |
| int ret; |
| |
| ret = m10bmc_sys_read(sec->m10bmc, M10BMC_DOORBELL, &doorbell); |
| if (ret) |
| return FW_UPLOAD_ERR_RW_ERROR; |
| |
| poll_timeout = jiffies + msecs_to_jiffies(RSU_PREP_TIMEOUT_MS); |
| while (rsu_prog(doorbell) == RSU_PROG_PREPARE) { |
| msleep(RSU_PREP_INTERVAL_MS); |
| if (time_after(jiffies, poll_timeout)) |
| break; |
| |
| ret = m10bmc_sys_read(sec->m10bmc, M10BMC_DOORBELL, &doorbell); |
| if (ret) |
| return FW_UPLOAD_ERR_RW_ERROR; |
| } |
| |
| progress = rsu_prog(doorbell); |
| if (progress == RSU_PROG_PREPARE) { |
| log_error_regs(sec, doorbell); |
| return FW_UPLOAD_ERR_TIMEOUT; |
| } else if (progress != RSU_PROG_READY) { |
| log_error_regs(sec, doorbell); |
| return FW_UPLOAD_ERR_HW_ERROR; |
| } |
| |
| return FW_UPLOAD_ERR_NONE; |
| } |
| |
| static enum fw_upload_err rsu_send_data(struct m10bmc_sec *sec) |
| { |
| u32 doorbell; |
| int ret; |
| |
| ret = regmap_update_bits(sec->m10bmc->regmap, |
| M10BMC_SYS_BASE + M10BMC_DOORBELL, |
| DRBL_HOST_STATUS, |
| FIELD_PREP(DRBL_HOST_STATUS, |
| HOST_STATUS_WRITE_DONE)); |
| if (ret) |
| return FW_UPLOAD_ERR_RW_ERROR; |
| |
| ret = regmap_read_poll_timeout(sec->m10bmc->regmap, |
| M10BMC_SYS_BASE + M10BMC_DOORBELL, |
| doorbell, |
| rsu_prog(doorbell) != RSU_PROG_READY, |
| NIOS_HANDSHAKE_INTERVAL_US, |
| NIOS_HANDSHAKE_TIMEOUT_US); |
| |
| if (ret == -ETIMEDOUT) { |
| log_error_regs(sec, doorbell); |
| return FW_UPLOAD_ERR_TIMEOUT; |
| } else if (ret) { |
| return FW_UPLOAD_ERR_RW_ERROR; |
| } |
| |
| switch (rsu_stat(doorbell)) { |
| case RSU_STAT_NORMAL: |
| case RSU_STAT_NIOS_OK: |
| case RSU_STAT_USER_OK: |
| case RSU_STAT_FACTORY_OK: |
| break; |
| default: |
| log_error_regs(sec, doorbell); |
| return FW_UPLOAD_ERR_HW_ERROR; |
| } |
| |
| return FW_UPLOAD_ERR_NONE; |
| } |
| |
| static int rsu_check_complete(struct m10bmc_sec *sec, u32 *doorbell) |
| { |
| if (m10bmc_sys_read(sec->m10bmc, M10BMC_DOORBELL, doorbell)) |
| return -EIO; |
| |
| switch (rsu_stat(*doorbell)) { |
| case RSU_STAT_NORMAL: |
| case RSU_STAT_NIOS_OK: |
| case RSU_STAT_USER_OK: |
| case RSU_STAT_FACTORY_OK: |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (rsu_prog(*doorbell)) { |
| case RSU_PROG_IDLE: |
| case RSU_PROG_RSU_DONE: |
| return 0; |
| case RSU_PROG_AUTHENTICATING: |
| case RSU_PROG_COPYING: |
| case RSU_PROG_UPDATE_CANCEL: |
| case RSU_PROG_PROGRAM_KEY_HASH: |
| return -EAGAIN; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static enum fw_upload_err rsu_cancel(struct m10bmc_sec *sec) |
| { |
| u32 doorbell; |
| int ret; |
| |
| ret = m10bmc_sys_read(sec->m10bmc, M10BMC_DOORBELL, &doorbell); |
| if (ret) |
| return FW_UPLOAD_ERR_RW_ERROR; |
| |
| if (rsu_prog(doorbell) != RSU_PROG_READY) |
| return FW_UPLOAD_ERR_BUSY; |
| |
| ret = regmap_update_bits(sec->m10bmc->regmap, |
| M10BMC_SYS_BASE + M10BMC_DOORBELL, |
| DRBL_HOST_STATUS, |
| FIELD_PREP(DRBL_HOST_STATUS, |
| HOST_STATUS_ABORT_RSU)); |
| if (ret) |
| return FW_UPLOAD_ERR_RW_ERROR; |
| |
| return FW_UPLOAD_ERR_CANCELED; |
| } |
| |
| static enum fw_upload_err m10bmc_sec_prepare(struct fw_upload *fwl, |
| const u8 *data, u32 size) |
| { |
| struct m10bmc_sec *sec = fwl->dd_handle; |
| u32 ret; |
| |
| sec->cancel_request = false; |
| |
| if (!size || size > M10BMC_STAGING_SIZE) |
| return FW_UPLOAD_ERR_INVALID_SIZE; |
| |
| ret = rsu_check_idle(sec); |
| if (ret != FW_UPLOAD_ERR_NONE) |
| return ret; |
| |
| ret = rsu_update_init(sec); |
| if (ret != FW_UPLOAD_ERR_NONE) |
| return ret; |
| |
| ret = rsu_prog_ready(sec); |
| if (ret != FW_UPLOAD_ERR_NONE) |
| return ret; |
| |
| if (sec->cancel_request) |
| return rsu_cancel(sec); |
| |
| return FW_UPLOAD_ERR_NONE; |
| } |
| |
| #define WRITE_BLOCK_SIZE 0x4000 /* Default write-block size is 0x4000 bytes */ |
| |
| static enum fw_upload_err m10bmc_sec_write(struct fw_upload *fwl, const u8 *data, |
| u32 offset, u32 size, u32 *written) |
| { |
| struct m10bmc_sec *sec = fwl->dd_handle; |
| u32 blk_size, doorbell, extra_offset; |
| unsigned int stride, extra = 0; |
| int ret; |
| |
| stride = regmap_get_reg_stride(sec->m10bmc->regmap); |
| if (sec->cancel_request) |
| return rsu_cancel(sec); |
| |
| ret = m10bmc_sys_read(sec->m10bmc, M10BMC_DOORBELL, &doorbell); |
| if (ret) { |
| return FW_UPLOAD_ERR_RW_ERROR; |
| } else if (rsu_prog(doorbell) != RSU_PROG_READY) { |
| log_error_regs(sec, doorbell); |
| return FW_UPLOAD_ERR_HW_ERROR; |
| } |
| |
| WARN_ON_ONCE(WRITE_BLOCK_SIZE % stride); |
| blk_size = min_t(u32, WRITE_BLOCK_SIZE, size); |
| ret = regmap_bulk_write(sec->m10bmc->regmap, |
| M10BMC_STAGING_BASE + offset, |
| (void *)data + offset, |
| blk_size / stride); |
| if (ret) |
| return FW_UPLOAD_ERR_RW_ERROR; |
| |
| /* |
| * If blk_size is not aligned to stride, then handle the extra |
| * bytes with regmap_write. |
| */ |
| if (blk_size % stride) { |
| extra_offset = offset + ALIGN_DOWN(blk_size, stride); |
| memcpy(&extra, (u8 *)(data + extra_offset), blk_size % stride); |
| ret = regmap_write(sec->m10bmc->regmap, |
| M10BMC_STAGING_BASE + extra_offset, extra); |
| if (ret) |
| return FW_UPLOAD_ERR_RW_ERROR; |
| } |
| |
| *written = blk_size; |
| return FW_UPLOAD_ERR_NONE; |
| } |
| |
| static enum fw_upload_err m10bmc_sec_poll_complete(struct fw_upload *fwl) |
| { |
| struct m10bmc_sec *sec = fwl->dd_handle; |
| unsigned long poll_timeout; |
| u32 doorbell, result; |
| int ret; |
| |
| if (sec->cancel_request) |
| return rsu_cancel(sec); |
| |
| result = rsu_send_data(sec); |
| if (result != FW_UPLOAD_ERR_NONE) |
| return result; |
| |
| poll_timeout = jiffies + msecs_to_jiffies(RSU_COMPLETE_TIMEOUT_MS); |
| do { |
| msleep(RSU_COMPLETE_INTERVAL_MS); |
| ret = rsu_check_complete(sec, &doorbell); |
| } while (ret == -EAGAIN && !time_after(jiffies, poll_timeout)); |
| |
| if (ret == -EAGAIN) { |
| log_error_regs(sec, doorbell); |
| return FW_UPLOAD_ERR_TIMEOUT; |
| } else if (ret == -EIO) { |
| return FW_UPLOAD_ERR_RW_ERROR; |
| } else if (ret) { |
| log_error_regs(sec, doorbell); |
| return FW_UPLOAD_ERR_HW_ERROR; |
| } |
| |
| return FW_UPLOAD_ERR_NONE; |
| } |
| |
| /* |
| * m10bmc_sec_cancel() may be called asynchronously with an on-going update. |
| * All other functions are called sequentially in a single thread. To avoid |
| * contention on register accesses, m10bmc_sec_cancel() must only update |
| * the cancel_request flag. Other functions will check this flag and handle |
| * the cancel request synchronously. |
| */ |
| static void m10bmc_sec_cancel(struct fw_upload *fwl) |
| { |
| struct m10bmc_sec *sec = fwl->dd_handle; |
| |
| sec->cancel_request = true; |
| } |
| |
| static void m10bmc_sec_cleanup(struct fw_upload *fwl) |
| { |
| struct m10bmc_sec *sec = fwl->dd_handle; |
| |
| (void)rsu_cancel(sec); |
| } |
| |
| static const struct fw_upload_ops m10bmc_ops = { |
| .prepare = m10bmc_sec_prepare, |
| .write = m10bmc_sec_write, |
| .poll_complete = m10bmc_sec_poll_complete, |
| .cancel = m10bmc_sec_cancel, |
| .cleanup = m10bmc_sec_cleanup, |
| }; |
| |
| #define SEC_UPDATE_LEN_MAX 32 |
| static int m10bmc_sec_probe(struct platform_device *pdev) |
| { |
| char buf[SEC_UPDATE_LEN_MAX]; |
| struct m10bmc_sec *sec; |
| struct fw_upload *fwl; |
| unsigned int len; |
| int ret; |
| |
| sec = devm_kzalloc(&pdev->dev, sizeof(*sec), GFP_KERNEL); |
| if (!sec) |
| return -ENOMEM; |
| |
| sec->dev = &pdev->dev; |
| sec->m10bmc = dev_get_drvdata(pdev->dev.parent); |
| dev_set_drvdata(&pdev->dev, sec); |
| |
| ret = xa_alloc(&fw_upload_xa, &sec->fw_name_id, sec, |
| xa_limit_32b, GFP_KERNEL); |
| if (ret) |
| return ret; |
| |
| len = scnprintf(buf, SEC_UPDATE_LEN_MAX, "secure-update%d", |
| sec->fw_name_id); |
| sec->fw_name = kmemdup_nul(buf, len, GFP_KERNEL); |
| if (!sec->fw_name) |
| return -ENOMEM; |
| |
| fwl = firmware_upload_register(THIS_MODULE, sec->dev, sec->fw_name, |
| &m10bmc_ops, sec); |
| if (IS_ERR(fwl)) { |
| dev_err(sec->dev, "Firmware Upload driver failed to start\n"); |
| kfree(sec->fw_name); |
| xa_erase(&fw_upload_xa, sec->fw_name_id); |
| return PTR_ERR(fwl); |
| } |
| |
| sec->fwl = fwl; |
| return 0; |
| } |
| |
| static int m10bmc_sec_remove(struct platform_device *pdev) |
| { |
| struct m10bmc_sec *sec = dev_get_drvdata(&pdev->dev); |
| |
| firmware_upload_unregister(sec->fwl); |
| kfree(sec->fw_name); |
| xa_erase(&fw_upload_xa, sec->fw_name_id); |
| |
| return 0; |
| } |
| |
| static const struct platform_device_id intel_m10bmc_sec_ids[] = { |
| { |
| .name = "n3000bmc-sec-update", |
| }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(platform, intel_m10bmc_sec_ids); |
| |
| static struct platform_driver intel_m10bmc_sec_driver = { |
| .probe = m10bmc_sec_probe, |
| .remove = m10bmc_sec_remove, |
| .driver = { |
| .name = "intel-m10bmc-sec-update", |
| .dev_groups = m10bmc_sec_attr_groups, |
| }, |
| .id_table = intel_m10bmc_sec_ids, |
| }; |
| module_platform_driver(intel_m10bmc_sec_driver); |
| |
| MODULE_AUTHOR("Intel Corporation"); |
| MODULE_DESCRIPTION("Intel MAX10 BMC Secure Update"); |
| MODULE_LICENSE("GPL"); |