| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_health |
| Date: June 2018 |
| KernelVersion: 4.19 |
| Contact: Vadim Pasternak <vadimpmellanox.com> |
| Description: This file shows ASIC health status. The possible values are: |
| 0 - health failed, 2 - health OK, 3 - ASIC in booting state. |
| |
| The files are read only. |
| |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version |
| Date: June 2018 |
| KernelVersion: 4.19 |
| Contact: Vadim Pasternak <vadimpmellanox.com> |
| Description: These files show with which CPLD versions have been burned |
| on carrier and switch boards. |
| |
| The files are read only. |
| |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/fan_dir |
| Date: December 2018 |
| KernelVersion: 5.0 |
| Contact: Vadim Pasternak <vadimpmellanox.com> |
| Description: This file shows the system fans direction: |
| forward direction - relevant bit is set 0; |
| reversed direction - relevant bit is set 1. |
| |
| The files are read only. |
| |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version |
| Date: November 2018 |
| KernelVersion: 5.0 |
| Contact: Vadim Pasternak <vadimpmellanox.com> |
| Description: These files show with which CPLD versions have been burned |
| on LED or Gearbox board. |
| |
| The files are read only. |
| |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable |
| Date: November 2018 |
| KernelVersion: 5.0 |
| Contact: Vadim Pasternak <vadimpmellanox.com> |
| Description: These files enable and disable the access to the JTAG domain. |
| By default access to the JTAG domain is disabled. |
| |
| The file is read/write. |
| |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/select_iio |
| Date: June 2018 |
| KernelVersion: 4.19 |
| Contact: Vadim Pasternak <vadimpmellanox.com> |
| Description: This file allows iio devices selection. |
| |
| Attribute select_iio can be written with 0 or with 1. It |
| selects which one of iio devices can be accessed. |
| |
| The file is read/write. |
| |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu1_on |
| /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu2_on |
| /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_cycle |
| /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_down |
| Date: June 2018 |
| KernelVersion: 4.19 |
| Contact: Vadim Pasternak <vadimpmellanox.com> |
| Description: These files allow asserting system power cycling, switching |
| power supply units on and off and system's main power domain |
| shutdown. |
| Expected behavior: |
| When pwr_cycle is written 1: auxiliary power domain will go |
| down and after short period (about 1 second) up. |
| When psu1_on or psu2_on is written 1, related unit will be |
| disconnected from the power source, when written 0 - connected. |
| If both are written 1 - power supplies main power domain will |
| go down. |
| When pwr_down is written 1, system's main power domain will go |
| down. |
| |
| The files are write only. |
| |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_aux_pwr_or_ref |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_asic_thermal |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_hotswap_or_halt |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_hotswap_or_wd |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_fw_reset |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_long_pb |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_main_pwr_fail |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_short_pb |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_reset |
| Date: June 2018 |
| KernelVersion: 4.19 |
| Contact: Vadim Pasternak <vadimpmellanox.com> |
| Description: These files show the system reset cause, as following: power |
| auxiliary outage or power refresh, ASIC thermal shutdown, halt, |
| hotswap, watchdog, firmware reset, long press power button, |
| short press power button, software reset. Value 1 in file means |
| this is reset cause, 0 - otherwise. Only one of the above |
| causes could be 1 at the same time, representing only last |
| reset cause. |
| |
| The files are read only. |
| |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_pwr_fail |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_comex |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_system |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_voltmon_upgrade_fail |
| Date: November 2018 |
| KernelVersion: 5.0 |
| Contact: Vadim Pasternak <vadimpmellanox.com> |
| Description: These files show the system reset cause, as following: ComEx |
| power fail, reset from ComEx, system platform reset, reset |
| due to voltage monitor devices upgrade failure, |
| Value 1 in file means this is reset cause, 0 - otherwise. |
| Only one bit could be 1 at the same time, representing only |
| the last reset cause. |
| |
| The files are read only. |
| |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version |
| Date: November 2018 |
| KernelVersion: 5.0 |
| Contact: Vadim Pasternak <vadimpmellanox.com> |
| Description: These files show with which CPLD versions have been burned |
| on LED board. |
| |
| The files are read only. |
| |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_thermal |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_wd |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_asic |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_reload_bios |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd |
| Date: June 2019 |
| KernelVersion: 5.3 |
| Contact: Vadim Pasternak <vadimpmellanox.com> |
| Description: These files show the system reset cause, as following: |
| COMEX thermal shutdown; wathchdog power off or reset was derived |
| by one of the next components: COMEX, switch board or by Small Form |
| Factor mezzanine, reset requested from ASIC, reset caused by BIOS |
| reload. Value 1 in file means this is reset cause, 0 - otherwise. |
| Only one of the above causes could be 1 at the same time, representing |
| only last reset cause. |
| |
| The files are read only. |
| |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config1 |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config2 |
| Date: January 2020 |
| KernelVersion: 5.6 |
| Contact: Vadim Pasternak <vadimpmellanox.com> |
| Description: These files show system static topology identification |
| like system's static I2C topology, number and type of FPGA |
| devices within the system and so on. |
| |
| The files are read only. |
| |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_ac_pwr_fail |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_platform |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_soc |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_pwr_off |
| Date: January 2020 |
| KernelVersion: 5.6 |
| Contact: Vadim Pasternak <vadimpmellanox.com> |
| Description: These files show the system reset causes, as following: reset |
| due to AC power failure, reset invoked from software by |
| assertion reset signal through CPLD. reset caused by signal |
| asserted by SOC through ACPI register, reset invoked from |
| software by assertion power off signal through CPLD. |
| |
| The files are read only. |
| |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pcie_asic_reset_dis |
| Date: January 2020 |
| KernelVersion: 5.6 |
| Contact: Vadim Pasternak <vadimpmellanox.com> |
| Description: This file allows to retain ASIC up during PCIe root complex |
| reset, when attribute is set 1. |
| |
| The file is read/write. |
| |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/vpd_wp |
| Date: January 2020 |
| KernelVersion: 5.6 |
| Contact: Vadim Pasternak <vadimpmellanox.com> |
| Description: This file allows to overwrite system VPD hardware write |
| protection when attribute is set 1. |
| |
| The file is read/write. |
| |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/voltreg_update_status |
| Date: January 2020 |
| KernelVersion: 5.6 |
| Contact: Vadim Pasternak <vadimpmellanox.com> |
| Description: This file exposes the configuration update status of burnable |
| voltage regulator devices. The status values are as following: |
| 0 - OK; 1 - CRC failure; 2 = I2C failure; 3 - in progress. |
| |
| The file is read only. |
| |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ufm_version |
| Date: January 2020 |
| KernelVersion: 5.6 |
| Contact: Vadim Pasternak <vadimpmellanox.com> |
| Description: This file exposes the firmware version of burnable voltage |
| regulator devices. |
| |
| The file is read only. |
| |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_pn |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_pn |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_pn |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_pn |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version_min |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version_min |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version_min |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version_min |
| Date: July 2020 |
| KernelVersion: 5.9 |
| Contact: Vadim Pasternak <vadimpmellanox.com> |
| Description: These files show with which CPLD part numbers and minor |
| versions have been burned CPLD devices equipped on a |
| system. |
| |
| The files are read only. |
| |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/bios_active_image |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/bios_auth_fail |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/bios_upgrade_fail |
| Date: October 2021 |
| KernelVersion: 5.16 |
| Contact: Vadim Pasternak <vadimp@nvidia.com> |
| Description: The files represent BIOS statuses: |
| |
| bios_active_image: location of current active BIOS image: |
| 0: Top, 1: Bottom. |
| The reported value should correspond to value expected by OS |
| in case of BIOS safe mode is 0. This bit is related to Intel |
| top-swap feature of DualBios on the same flash. |
| |
| bios_auth_fail: BIOS upgrade is failed because provided BIOS |
| image is not signed correctly. |
| |
| bios_upgrade_fail: BIOS upgrade is failed by some other |
| reason not because authentication. For example due to |
| physical SPI flash problem. |
| |
| The files are read only. |
| |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc1_enable |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc2_enable |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc3_enable |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc4_enable |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc5_enable |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc6_enable |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc7_enable |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc8_enable |
| Date: October 2021 |
| KernelVersion: 5.16 |
| Contact: Vadim Pasternak <vadimp@nvidia.com> |
| Description: These files allow line cards enable state control. |
| Expected behavior: |
| When lc{n}_enable is written 1, related line card is released |
| from the reset state, when 0 - is hold in reset state. |
| |
| The files are read/write. |
| |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc1_pwr |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc2_pwr |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc3_pwr |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc4_pwr |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc5_pwr |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc6_pwr |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc7_pwr |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc8_pwr |
| Date: October 2021 |
| KernelVersion: 5.16 |
| Contact: Vadim Pasternak <vadimp@nvidia.com> |
| Description: These files switching line cards power on and off. |
| Expected behavior: |
| When lc{n}_pwr is written 1, related line card is powered |
| on, when written 0 - powered off. |
| |
| The files are read/write. |
| |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc1_rst_mask |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc2_rst_mask |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc3_rst_mask |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc4_rst_mask |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc5_rst_mask |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc6_rst_mask |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc7_rst_mask |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc8_rst_mask |
| Date: October 2021 |
| KernelVersion: 5.16 |
| Contact: Vadim Pasternak <vadimp@nvidia.com> |
| Description: These files clear line card reset bit enforced by ASIC, when it |
| sets it due to some abnormal ASIC behavior. |
| Expected behavior: |
| When lc{n}_rst_mask is written 1, related line card reset bit |
| is cleared, when written 0 - no effect. |
| |
| The files are write only. |
| |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/os_started |
| Date: October 2021 |
| KernelVersion: 5.16 |
| Contact: Vadim Pasternak <vadimp@nvidia.com> |
| Description: This file, when written 1, indicates to programmable devices |
| that OS is taking control over it. |
| |
| The file is read/write. |
| |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pm_mgmt_en |
| Date: October 2021 |
| KernelVersion: 5.16 |
| Contact: Vadim Pasternak <vadimp@nvidia.com> |
| Description: This file assigns power management control ownership. |
| When power management control is provided by hardware, hardware |
| will automatically power off one or more line previously |
| powered line cards in case system power budget is getting |
| insufficient. It could be in case when some of power units lost |
| power good state. |
| When pm_mgmt_en is written 1, power management control by |
| software is enabled, 0 - power management control by hardware. |
| Note that for any setting of pm_mgmt_en attribute hardware will |
| not allow to power on any new line card in case system power |
| budget is insufficient. |
| Same in case software will try to power on several line cards |
| at once - hardware will power line cards while system has |
| enough power budget. |
| Default is 0. |
| |
| The file is read/write. |
| |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu3_on |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu4_on |
| Date: October 2021 |
| KernelVersion: 5.16 |
| Contact: Vadim Pasternak <vadimp@nvidia.com> |
| Description: These files switching power supply units on and off. |
| Expected behavior: |
| When psu3_on or psu4_on is written 1, related unit will be |
| disconnected from the power source, when written 0 - connected. |
| |
| The files are write only. |
| |
| What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/shutdown_unlock |
| Date: October 2021 |
| KernelVersion: 5.16 |
| Contact: Vadim Pasternak <vadimp@nvidia.com> |
| Description: This file allows to unlock ASIC after thermal shutdown event. |
| When system thermal shutdown is enforced by ASIC, ASIC is |
| getting locked and after system boot it will not be available. |
| Software can decide to unlock it by setting this attribute to |
| 1 and then perform system power cycle by setting pwr_cycle |
| attribute to 1 (power cycle of main power domain). |
| Before setting shutdown_unlock to 1 it is recommended to |
| validate that system reboot cause is reset_asic_thermal or |
| reset_thermal_spc_or_pciesw. |
| In case shutdown_unlock is not set 1, the only way to release |
| ASIC from locking - is full system power cycle through the |
| external power distribution unit. |
| Default is 1. |
| |
| The file is read/write. |
| |
| What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld1_pn |
| What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld1_version |
| What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld1_version_min |
| Date: October 2021 |
| KernelVersion: 5.16 |
| Contact: Vadim Pasternak <vadimp@nvidia.com> |
| Description: These files show with which CPLD major and minor versions |
| and part number has been burned CPLD device on line card. |
| |
| The files are read only. |
| |
| What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga1_pn |
| What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga1_version |
| What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga1_version_min |
| Date: October 2021 |
| KernelVersion: 5.16 |
| Contact: Vadim Pasternak <vadimp@nvidia.com> |
| Description: These files show with which FPGA major and minor versions |
| and part number has been burned FPGA device on line card. |
| |
| The files are read only. |
| |
| What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/vpd_wp |
| Date: October 2021 |
| KernelVersion: 5.16 |
| Contact: Vadim Pasternak <vadimp@nvidia.com> |
| Description: This file allow to overwrite line card VPD hardware write |
| protection mode. When attribute is set 1 - write protection is |
| disabled, when 0 - enabled. |
| Default is 0. |
| If the system is in locked-down mode writing this file will not |
| be allowed. |
| The purpose if this file is to allow line card VPD burning |
| during production flow. |
| |
| The file is read/write. |
| |
| What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_aux_pwr_or_ref |
| What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_dc_dc_pwr_fail |
| What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_fpga_not_done |
| What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_from_chassis |
| What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_line_card |
| What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_pwr_off_from_chassis |
| Date: October 2021 |
| KernelVersion: 5.16 |
| Contact: Vadim Pasternak <vadimp@nvidia.com> |
| Description: These files show the line reset cause, as following: power |
| auxiliary outage or power refresh, DC-to-DC power failure, FPGA reset |
| failed, line card reset failed, power off from chassis. |
| Value 1 in file means this is reset cause, 0 - otherwise. Only one of |
| the above causes could be 1 at the same time, representing only last |
| reset cause. |
| |
| The files are read only. |
| |
| What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld_upgrade_en |
| What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga_upgrade_en |
| Date: October 2021 |
| KernelVersion: 5.16 |
| Contact: Vadim Pasternak <vadimp@nvidia.com> |
| Description: These files allow CPLD and FPGA burning. Value 1 in file means burning |
| is enabled, 0 - otherwise. |
| If the system is in locked-down mode writing these files will |
| not be allowed. |
| The purpose of these files to allow line card CPLD and FPGA |
| upgrade through the JTAG daisy-chain. |
| |
| The files are read/write. |
| |
| What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/qsfp_pwr_en |
| What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/pwr_en |
| Date: October 2021 |
| KernelVersion: 5.16 |
| Contact: Vadim Pasternak <vadimp@nvidia.com> |
| Description: These files allow to power on/off all QSFP ports and whole line card. |
| The attributes are set 1 for power on, 0 - for power off. |
| |
| The files are read/write. |
| |
| What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/agb_spi_burn_en |
| What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga_spi_burn_en |
| Date: October 2021 |
| KernelVersion: 5.16 |
| Contact: Vadim Pasternak <vadimp@nvidia.com> |
| Description: These files allow gearboxes and FPGA SPI flash burning. |
| The attributes are set 1 to enable burning, 0 - to disable. |
| If the system is in locked-down mode writing these files will |
| not be allowed. |
| The purpose of these files to allow line card Gearboxes and FPGA |
| burning during production flow. |
| |
| The file is read/write. |
| |
| What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/max_power |
| What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/config |
| Date: October 2021 |
| KernelVersion: 5.16 |
| Contact: Vadim Pasternak <vadimp@nvidia.com> |
| Description: These files provide the maximum powered required for line card |
| feeding and line card configuration Id. |
| |
| The files are read only. |
