| /* |
| * Copyright (c) 2017 MediaTek Inc. |
| * Author: Ming Huang <ming.huang@mediatek.com> |
| * Sean Wang <sean.wang@mediatek.com> |
| * |
| * SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| */ |
| |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clock/mt7622-clk.h> |
| #include <dt-bindings/phy/phy.h> |
| #include <dt-bindings/power/mt7622-power.h> |
| #include <dt-bindings/reset/mt7622-reset.h> |
| #include <dt-bindings/thermal/thermal.h> |
| |
| / { |
| compatible = "mediatek,mt7622"; |
| interrupt-parent = <&sysirq>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| cpu_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| opp-shared; |
| opp-300000000 { |
| opp-hz = /bits/ 64 <30000000>; |
| opp-microvolt = <950000>; |
| }; |
| |
| opp-437500000 { |
| opp-hz = /bits/ 64 <437500000>; |
| opp-microvolt = <1000000>; |
| }; |
| |
| opp-600000000 { |
| opp-hz = /bits/ 64 <600000000>; |
| opp-microvolt = <1050000>; |
| }; |
| |
| opp-812500000 { |
| opp-hz = /bits/ 64 <812500000>; |
| opp-microvolt = <1100000>; |
| }; |
| |
| opp-1025000000 { |
| opp-hz = /bits/ 64 <1025000000>; |
| opp-microvolt = <1150000>; |
| }; |
| |
| opp-1137500000 { |
| opp-hz = /bits/ 64 <1137500000>; |
| opp-microvolt = <1200000>; |
| }; |
| |
| opp-1262500000 { |
| opp-hz = /bits/ 64 <1262500000>; |
| opp-microvolt = <1250000>; |
| }; |
| |
| opp-1350000000 { |
| opp-hz = /bits/ 64 <1350000000>; |
| opp-microvolt = <1310000>; |
| }; |
| }; |
| |
| cpus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x0 0x0>; |
| clocks = <&infracfg CLK_INFRA_MUX1_SEL>, |
| <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>; |
| clock-names = "cpu", "intermediate"; |
| operating-points-v2 = <&cpu_opp_table>; |
| #cooling-cells = <2>; |
| enable-method = "psci"; |
| clock-frequency = <1300000000>; |
| cci-control-port = <&cci_control2>; |
| }; |
| |
| cpu1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x0 0x1>; |
| clocks = <&infracfg CLK_INFRA_MUX1_SEL>, |
| <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>; |
| clock-names = "cpu", "intermediate"; |
| operating-points-v2 = <&cpu_opp_table>; |
| #cooling-cells = <2>; |
| enable-method = "psci"; |
| clock-frequency = <1300000000>; |
| cci-control-port = <&cci_control2>; |
| }; |
| }; |
| |
| pwrap_clk: dummy40m { |
| compatible = "fixed-clock"; |
| clock-frequency = <40000000>; |
| #clock-cells = <0>; |
| }; |
| |
| clk25m: oscillator { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <25000000>; |
| clock-output-names = "clkxtal"; |
| }; |
| |
| psci { |
| compatible = "arm,psci-0.2"; |
| method = "smc"; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a53-pmu"; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>; |
| interrupt-affinity = <&cpu0>, <&cpu1>; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| /* 192 KiB reserved for ARM Trusted Firmware (BL31) */ |
| secmon_reserved: secmon@43000000 { |
| reg = <0 0x43000000 0 0x30000>; |
| no-map; |
| }; |
| }; |
| |
| thermal-zones { |
| cpu_thermal: cpu-thermal { |
| polling-delay-passive = <1000>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&thermal 0>; |
| |
| trips { |
| cpu_passive: cpu-passive { |
| temperature = <47000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu_active: cpu-active { |
| temperature = <67000>; |
| hysteresis = <2000>; |
| type = "active"; |
| }; |
| |
| cpu_hot: cpu-hot { |
| temperature = <87000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| cpu-crit { |
| temperature = <107000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu_passive>; |
| cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| |
| map1 { |
| trip = <&cpu_active>; |
| cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| |
| map2 { |
| trip = <&cpu_hot>; |
| cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | |
| IRQ_TYPE_LEVEL_HIGH)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | |
| IRQ_TYPE_LEVEL_HIGH)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | |
| IRQ_TYPE_LEVEL_HIGH)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | |
| IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| infracfg: infracfg@10000000 { |
| compatible = "mediatek,mt7622-infracfg", |
| "syscon"; |
| reg = <0 0x10000000 0 0x1000>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| pwrap: pwrap@10001000 { |
| compatible = "mediatek,mt7622-pwrap"; |
| reg = <0 0x10001000 0 0x250>; |
| reg-names = "pwrap"; |
| clocks = <&infracfg CLK_INFRA_PMIC_PD>, <&pwrap_clk>; |
| clock-names = "spi", "wrap"; |
| resets = <&infracfg MT7622_INFRA_PMIC_WRAP_RST>; |
| reset-names = "pwrap"; |
| interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| pericfg: pericfg@10002000 { |
| compatible = "mediatek,mt7622-pericfg", |
| "syscon"; |
| reg = <0 0x10002000 0 0x1000>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| scpsys: power-controller@10006000 { |
| compatible = "mediatek,mt7622-scpsys", |
| "syscon"; |
| #power-domain-cells = <1>; |
| reg = <0 0x10006000 0 0x1000>; |
| interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_SPI 166 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>; |
| infracfg = <&infracfg>; |
| clocks = <&topckgen CLK_TOP_HIF_SEL>; |
| clock-names = "hif_sel"; |
| }; |
| |
| cir: cir@10009000 { |
| compatible = "mediatek,mt7622-cir"; |
| reg = <0 0x10009000 0 0x1000>; |
| interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&infracfg CLK_INFRA_IRRX_PD>, |
| <&topckgen CLK_TOP_AXI_SEL>; |
| clock-names = "clk", "bus"; |
| status = "disabled"; |
| }; |
| |
| sysirq: interrupt-controller@10200620 { |
| compatible = "mediatek,mt7622-sysirq", |
| "mediatek,mt6577-sysirq"; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| interrupt-parent = <&gic>; |
| reg = <0 0x10200620 0 0x20>; |
| }; |
| |
| efuse: efuse@10206000 { |
| compatible = "mediatek,mt7622-efuse", |
| "mediatek,efuse"; |
| reg = <0 0x10206000 0 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| thermal_calibration: calib@198 { |
| reg = <0x198 0xc>; |
| }; |
| }; |
| |
| apmixedsys: apmixedsys@10209000 { |
| compatible = "mediatek,mt7622-apmixedsys", |
| "syscon"; |
| reg = <0 0x10209000 0 0x1000>; |
| #clock-cells = <1>; |
| }; |
| |
| topckgen: topckgen@10210000 { |
| compatible = "mediatek,mt7622-topckgen", |
| "syscon"; |
| reg = <0 0x10210000 0 0x1000>; |
| #clock-cells = <1>; |
| }; |
| |
| rng: rng@1020f000 { |
| compatible = "mediatek,mt7622-rng", |
| "mediatek,mt7623-rng"; |
| reg = <0 0x1020f000 0 0x1000>; |
| clocks = <&infracfg CLK_INFRA_TRNG>; |
| clock-names = "rng"; |
| }; |
| |
| pio: pinctrl@10211000 { |
| compatible = "mediatek,mt7622-pinctrl"; |
| reg = <0 0x10211000 0 0x1000>, |
| <0 0x10005000 0 0x1000>; |
| reg-names = "base", "eint"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pio 0 0 103>; |
| interrupt-controller; |
| interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-parent = <&gic>; |
| #interrupt-cells = <2>; |
| }; |
| |
| watchdog: watchdog@10212000 { |
| compatible = "mediatek,mt7622-wdt", |
| "mediatek,mt6589-wdt"; |
| reg = <0 0x10212000 0 0x800>; |
| }; |
| |
| rtc: rtc@10212800 { |
| compatible = "mediatek,mt7622-rtc", |
| "mediatek,soc-rtc"; |
| reg = <0 0x10212800 0 0x200>; |
| interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&topckgen CLK_TOP_RTC>; |
| clock-names = "rtc"; |
| }; |
| |
| gic: interrupt-controller@10300000 { |
| compatible = "arm,gic-400"; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| interrupt-parent = <&gic>; |
| reg = <0 0x10310000 0 0x1000>, |
| <0 0x10320000 0 0x1000>, |
| <0 0x10340000 0 0x2000>, |
| <0 0x10360000 0 0x2000>; |
| }; |
| |
| cci: cci@10390000 { |
| compatible = "arm,cci-400"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0 0x10390000 0 0x1000>; |
| ranges = <0 0 0x10390000 0x10000>; |
| |
| cci_control0: slave-if@1000 { |
| compatible = "arm,cci-400-ctrl-if"; |
| interface-type = "ace-lite"; |
| reg = <0x1000 0x1000>; |
| }; |
| |
| cci_control1: slave-if@4000 { |
| compatible = "arm,cci-400-ctrl-if"; |
| interface-type = "ace"; |
| reg = <0x4000 0x1000>; |
| }; |
| |
| cci_control2: slave-if@5000 { |
| compatible = "arm,cci-400-ctrl-if"; |
| interface-type = "ace"; |
| reg = <0x5000 0x1000>; |
| }; |
| |
| pmu@9000 { |
| compatible = "arm,cci-400-pmu,r1"; |
| reg = <0x9000 0x5000>; |
| interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| auxadc: adc@11001000 { |
| compatible = "mediatek,mt7622-auxadc"; |
| reg = <0 0x11001000 0 0x1000>; |
| clocks = <&pericfg CLK_PERI_AUXADC_PD>; |
| clock-names = "main"; |
| #io-channel-cells = <1>; |
| }; |
| |
| uart0: serial@11002000 { |
| compatible = "mediatek,mt7622-uart", |
| "mediatek,mt6577-uart"; |
| reg = <0 0x11002000 0 0x400>; |
| interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&topckgen CLK_TOP_UART_SEL>, |
| <&pericfg CLK_PERI_UART0_PD>; |
| clock-names = "baud", "bus"; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@11003000 { |
| compatible = "mediatek,mt7622-uart", |
| "mediatek,mt6577-uart"; |
| reg = <0 0x11003000 0 0x400>; |
| interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&topckgen CLK_TOP_UART_SEL>, |
| <&pericfg CLK_PERI_UART1_PD>; |
| clock-names = "baud", "bus"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@11004000 { |
| compatible = "mediatek,mt7622-uart", |
| "mediatek,mt6577-uart"; |
| reg = <0 0x11004000 0 0x400>; |
| interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&topckgen CLK_TOP_UART_SEL>, |
| <&pericfg CLK_PERI_UART2_PD>; |
| clock-names = "baud", "bus"; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@11005000 { |
| compatible = "mediatek,mt7622-uart", |
| "mediatek,mt6577-uart"; |
| reg = <0 0x11005000 0 0x400>; |
| interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&topckgen CLK_TOP_UART_SEL>, |
| <&pericfg CLK_PERI_UART3_PD>; |
| clock-names = "baud", "bus"; |
| status = "disabled"; |
| }; |
| |
| pwm: pwm@11006000 { |
| compatible = "mediatek,mt7622-pwm"; |
| reg = <0 0x11006000 0 0x1000>; |
| interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&topckgen CLK_TOP_PWM_SEL>, |
| <&pericfg CLK_PERI_PWM_PD>, |
| <&pericfg CLK_PERI_PWM1_PD>, |
| <&pericfg CLK_PERI_PWM2_PD>, |
| <&pericfg CLK_PERI_PWM3_PD>, |
| <&pericfg CLK_PERI_PWM4_PD>, |
| <&pericfg CLK_PERI_PWM5_PD>, |
| <&pericfg CLK_PERI_PWM6_PD>; |
| clock-names = "top", "main", "pwm1", "pwm2", "pwm3", "pwm4", |
| "pwm5", "pwm6"; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@11007000 { |
| compatible = "mediatek,mt7622-i2c"; |
| reg = <0 0x11007000 0 0x90>, |
| <0 0x11000100 0 0x80>; |
| interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>; |
| clock-div = <16>; |
| clocks = <&pericfg CLK_PERI_I2C0_PD>, |
| <&pericfg CLK_PERI_AP_DMA_PD>; |
| clock-names = "main", "dma"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@11008000 { |
| compatible = "mediatek,mt7622-i2c"; |
| reg = <0 0x11008000 0 0x90>, |
| <0 0x11000180 0 0x80>; |
| interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>; |
| clock-div = <16>; |
| clocks = <&pericfg CLK_PERI_I2C1_PD>, |
| <&pericfg CLK_PERI_AP_DMA_PD>; |
| clock-names = "main", "dma"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@11009000 { |
| compatible = "mediatek,mt7622-i2c"; |
| reg = <0 0x11009000 0 0x90>, |
| <0 0x11000200 0 0x80>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>; |
| clock-div = <16>; |
| clocks = <&pericfg CLK_PERI_I2C2_PD>, |
| <&pericfg CLK_PERI_AP_DMA_PD>; |
| clock-names = "main", "dma"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi0: spi@1100a000 { |
| compatible = "mediatek,mt7622-spi"; |
| reg = <0 0x1100a000 0 0x100>; |
| interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, |
| <&topckgen CLK_TOP_SPI0_SEL>, |
| <&pericfg CLK_PERI_SPI0_PD>; |
| clock-names = "parent-clk", "sel-clk", "spi-clk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| thermal: thermal@1100b000 { |
| #thermal-sensor-cells = <1>; |
| compatible = "mediatek,mt7622-thermal"; |
| reg = <0 0x1100b000 0 0x1000>; |
| interrupts = <0 78 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&pericfg CLK_PERI_THERM_PD>, |
| <&pericfg CLK_PERI_AUXADC_PD>; |
| clock-names = "therm", "auxadc"; |
| resets = <&pericfg MT7622_PERI_THERM_SW_RST>; |
| reset-names = "therm"; |
| mediatek,auxadc = <&auxadc>; |
| mediatek,apmixedsys = <&apmixedsys>; |
| nvmem-cells = <&thermal_calibration>; |
| nvmem-cell-names = "calibration-data"; |
| }; |
| |
| btif: serial@1100c000 { |
| compatible = "mediatek,mt7622-btif", |
| "mediatek,mtk-btif"; |
| reg = <0 0x1100c000 0 0x1000>; |
| interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&pericfg CLK_PERI_BTIF_PD>; |
| clock-names = "main"; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| status = "disabled"; |
| |
| bluetooth { |
| compatible = "mediatek,mt7622-bluetooth"; |
| power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>; |
| clocks = <&clk25m>; |
| clock-names = "ref"; |
| }; |
| }; |
| |
| nandc: nfi@1100d000 { |
| compatible = "mediatek,mt7622-nfc"; |
| reg = <0 0x1100D000 0 0x1000>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&pericfg CLK_PERI_NFI_PD>, |
| <&pericfg CLK_PERI_SNFI_PD>; |
| clock-names = "nfi_clk", "pad_clk"; |
| ecc-engine = <&bch>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| bch: ecc@1100e000 { |
| compatible = "mediatek,mt7622-ecc"; |
| reg = <0 0x1100e000 0 0x1000>; |
| interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&pericfg CLK_PERI_NFIECC_PD>; |
| clock-names = "nfiecc_clk"; |
| status = "disabled"; |
| }; |
| |
| nor_flash: spi@11014000 { |
| compatible = "mediatek,mt7622-nor", |
| "mediatek,mt8173-nor"; |
| reg = <0 0x11014000 0 0xe0>; |
| clocks = <&pericfg CLK_PERI_FLASH_PD>, |
| <&topckgen CLK_TOP_FLASH_SEL>; |
| clock-names = "spi", "sf"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@11016000 { |
| compatible = "mediatek,mt7622-spi"; |
| reg = <0 0x11016000 0 0x100>; |
| interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, |
| <&topckgen CLK_TOP_SPI1_SEL>, |
| <&pericfg CLK_PERI_SPI1_PD>; |
| clock-names = "parent-clk", "sel-clk", "spi-clk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@11019000 { |
| compatible = "mediatek,mt7622-uart", |
| "mediatek,mt6577-uart"; |
| reg = <0 0x11019000 0 0x400>; |
| interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&topckgen CLK_TOP_UART_SEL>, |
| <&pericfg CLK_PERI_UART4_PD>; |
| clock-names = "baud", "bus"; |
| status = "disabled"; |
| }; |
| |
| audsys: clock-controller@11220000 { |
| compatible = "mediatek,mt7622-audsys", "syscon"; |
| reg = <0 0x11220000 0 0x2000>; |
| #clock-cells = <1>; |
| |
| afe: audio-controller { |
| compatible = "mediatek,mt7622-audio"; |
| interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>; |
| interrupt-names = "afe", "asys"; |
| |
| clocks = <&infracfg CLK_INFRA_AUDIO_PD>, |
| <&topckgen CLK_TOP_AUD1_SEL>, |
| <&topckgen CLK_TOP_AUD2_SEL>, |
| <&topckgen CLK_TOP_A1SYS_HP_DIV_PD>, |
| <&topckgen CLK_TOP_A2SYS_HP_DIV_PD>, |
| <&topckgen CLK_TOP_I2S0_MCK_SEL>, |
| <&topckgen CLK_TOP_I2S1_MCK_SEL>, |
| <&topckgen CLK_TOP_I2S2_MCK_SEL>, |
| <&topckgen CLK_TOP_I2S3_MCK_SEL>, |
| <&topckgen CLK_TOP_I2S0_MCK_DIV>, |
| <&topckgen CLK_TOP_I2S1_MCK_DIV>, |
| <&topckgen CLK_TOP_I2S2_MCK_DIV>, |
| <&topckgen CLK_TOP_I2S3_MCK_DIV>, |
| <&topckgen CLK_TOP_I2S0_MCK_DIV_PD>, |
| <&topckgen CLK_TOP_I2S1_MCK_DIV_PD>, |
| <&topckgen CLK_TOP_I2S2_MCK_DIV_PD>, |
| <&topckgen CLK_TOP_I2S3_MCK_DIV_PD>, |
| <&audsys CLK_AUDIO_I2SO1>, |
| <&audsys CLK_AUDIO_I2SO2>, |
| <&audsys CLK_AUDIO_I2SO3>, |
| <&audsys CLK_AUDIO_I2SO4>, |
| <&audsys CLK_AUDIO_I2SIN1>, |
| <&audsys CLK_AUDIO_I2SIN2>, |
| <&audsys CLK_AUDIO_I2SIN3>, |
| <&audsys CLK_AUDIO_I2SIN4>, |
| <&audsys CLK_AUDIO_ASRCO1>, |
| <&audsys CLK_AUDIO_ASRCO2>, |
| <&audsys CLK_AUDIO_ASRCO3>, |
| <&audsys CLK_AUDIO_ASRCO4>, |
| <&audsys CLK_AUDIO_AFE>, |
| <&audsys CLK_AUDIO_AFE_CONN>, |
| <&audsys CLK_AUDIO_A1SYS>, |
| <&audsys CLK_AUDIO_A2SYS>; |
| |
| clock-names = "infra_sys_audio_clk", |
| "top_audio_mux1_sel", |
| "top_audio_mux2_sel", |
| "top_audio_a1sys_hp", |
| "top_audio_a2sys_hp", |
| "i2s0_src_sel", |
| "i2s1_src_sel", |
| "i2s2_src_sel", |
| "i2s3_src_sel", |
| "i2s0_src_div", |
| "i2s1_src_div", |
| "i2s2_src_div", |
| "i2s3_src_div", |
| "i2s0_mclk_en", |
| "i2s1_mclk_en", |
| "i2s2_mclk_en", |
| "i2s3_mclk_en", |
| "i2so0_hop_ck", |
| "i2so1_hop_ck", |
| "i2so2_hop_ck", |
| "i2so3_hop_ck", |
| "i2si0_hop_ck", |
| "i2si1_hop_ck", |
| "i2si2_hop_ck", |
| "i2si3_hop_ck", |
| "asrc0_out_ck", |
| "asrc1_out_ck", |
| "asrc2_out_ck", |
| "asrc3_out_ck", |
| "audio_afe_pd", |
| "audio_afe_conn_pd", |
| "audio_a1sys_pd", |
| "audio_a2sys_pd"; |
| |
| assigned-clocks = <&topckgen CLK_TOP_A1SYS_HP_SEL>, |
| <&topckgen CLK_TOP_A2SYS_HP_SEL>, |
| <&topckgen CLK_TOP_A1SYS_HP_DIV>, |
| <&topckgen CLK_TOP_A2SYS_HP_DIV>; |
| assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL>, |
| <&topckgen CLK_TOP_AUD2PLL>; |
| assigned-clock-rates = <0>, <0>, <49152000>, <45158400>; |
| }; |
| }; |
| |
| mmc0: mmc@11230000 { |
| compatible = "mediatek,mt7622-mmc"; |
| reg = <0 0x11230000 0 0x1000>; |
| interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&pericfg CLK_PERI_MSDC30_0_PD>, |
| <&topckgen CLK_TOP_MSDC50_0_SEL>; |
| clock-names = "source", "hclk"; |
| resets = <&pericfg MT7622_PERI_MSDC0_SW_RST>; |
| reset-names = "hrst"; |
| status = "disabled"; |
| }; |
| |
| mmc1: mmc@11240000 { |
| compatible = "mediatek,mt7622-mmc"; |
| reg = <0 0x11240000 0 0x1000>; |
| interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&pericfg CLK_PERI_MSDC30_1_PD>, |
| <&topckgen CLK_TOP_AXI_SEL>; |
| clock-names = "source", "hclk"; |
| resets = <&pericfg MT7622_PERI_MSDC1_SW_RST>; |
| reset-names = "hrst"; |
| status = "disabled"; |
| }; |
| |
| wmac: wmac@18000000 { |
| compatible = "mediatek,mt7622-wmac"; |
| reg = <0 0x18000000 0 0x100000>; |
| interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>; |
| |
| mediatek,infracfg = <&infracfg>; |
| status = "disabled"; |
| |
| power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>; |
| }; |
| |
| ssusbsys: ssusbsys@1a000000 { |
| compatible = "mediatek,mt7622-ssusbsys", |
| "syscon"; |
| reg = <0 0x1a000000 0 0x1000>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| ssusb: usb@1a0c0000 { |
| compatible = "mediatek,mt7622-xhci", |
| "mediatek,mtk-xhci"; |
| reg = <0 0x1a0c0000 0 0x01000>, |
| <0 0x1a0c4700 0 0x0100>; |
| reg-names = "mac", "ippc"; |
| interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>; |
| power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF1>; |
| clocks = <&ssusbsys CLK_SSUSB_SYS_EN>, |
| <&ssusbsys CLK_SSUSB_REF_EN>, |
| <&ssusbsys CLK_SSUSB_MCU_EN>, |
| <&ssusbsys CLK_SSUSB_DMA_EN>; |
| clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck"; |
| phys = <&u2port0 PHY_TYPE_USB2>, |
| <&u3port0 PHY_TYPE_USB3>, |
| <&u2port1 PHY_TYPE_USB2>; |
| |
| status = "disabled"; |
| }; |
| |
| u3phy: t-phy@1a0c4000 { |
| compatible = "mediatek,mt7622-tphy", |
| "mediatek,generic-tphy-v1"; |
| reg = <0 0x1a0c4000 0 0x700>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| status = "disabled"; |
| |
| u2port0: usb-phy@1a0c4800 { |
| reg = <0 0x1a0c4800 0 0x0100>; |
| #phy-cells = <1>; |
| clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>; |
| clock-names = "ref"; |
| }; |
| |
| u3port0: usb-phy@1a0c4900 { |
| reg = <0 0x1a0c4900 0 0x0700>; |
| #phy-cells = <1>; |
| clocks = <&clk25m>; |
| clock-names = "ref"; |
| }; |
| |
| u2port1: usb-phy@1a0c5000 { |
| reg = <0 0x1a0c5000 0 0x0100>; |
| #phy-cells = <1>; |
| clocks = <&ssusbsys CLK_SSUSB_U2_PHY_1P_EN>; |
| clock-names = "ref"; |
| }; |
| }; |
| |
| pciesys: pciesys@1a100800 { |
| compatible = "mediatek,mt7622-pciesys", |
| "syscon"; |
| reg = <0 0x1a100800 0 0x1000>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| pciecfg: pciecfg@1a140000 { |
| compatible = "mediatek,generic-pciecfg", "syscon"; |
| reg = <0 0x1a140000 0 0x1000>; |
| }; |
| |
| pcie0: pcie@1a143000 { |
| compatible = "mediatek,mt7622-pcie"; |
| device_type = "pci"; |
| reg = <0 0x1a143000 0 0x1000>; |
| reg-names = "port0"; |
| linux,pci-domain = <0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>; |
| interrupt-names = "pcie_irq"; |
| clocks = <&pciesys CLK_PCIE_P0_MAC_EN>, |
| <&pciesys CLK_PCIE_P0_AHB_EN>, |
| <&pciesys CLK_PCIE_P0_AUX_EN>, |
| <&pciesys CLK_PCIE_P0_AXI_EN>, |
| <&pciesys CLK_PCIE_P0_OBFF_EN>, |
| <&pciesys CLK_PCIE_P0_PIPE_EN>; |
| clock-names = "sys_ck0", "ahb_ck0", "aux_ck0", |
| "axi_ck0", "obff_ck0", "pipe_ck0"; |
| |
| power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; |
| bus-range = <0x00 0xff>; |
| ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>; |
| status = "disabled"; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0 0 0 1 &pcie_intc0 0>, |
| <0 0 0 2 &pcie_intc0 1>, |
| <0 0 0 3 &pcie_intc0 2>, |
| <0 0 0 4 &pcie_intc0 3>; |
| pcie_intc0: interrupt-controller { |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| }; |
| }; |
| |
| pcie1: pcie@1a145000 { |
| compatible = "mediatek,mt7622-pcie"; |
| device_type = "pci"; |
| reg = <0 0x1a145000 0 0x1000>; |
| reg-names = "port1"; |
| linux,pci-domain = <1>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>; |
| interrupt-names = "pcie_irq"; |
| clocks = <&pciesys CLK_PCIE_P1_MAC_EN>, |
| /* designer has connect RC1 with p0_ahb clock */ |
| <&pciesys CLK_PCIE_P0_AHB_EN>, |
| <&pciesys CLK_PCIE_P1_AUX_EN>, |
| <&pciesys CLK_PCIE_P1_AXI_EN>, |
| <&pciesys CLK_PCIE_P1_OBFF_EN>, |
| <&pciesys CLK_PCIE_P1_PIPE_EN>; |
| clock-names = "sys_ck1", "ahb_ck1", "aux_ck1", |
| "axi_ck1", "obff_ck1", "pipe_ck1"; |
| |
| power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; |
| bus-range = <0x00 0xff>; |
| ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>; |
| status = "disabled"; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0 0 0 1 &pcie_intc1 0>, |
| <0 0 0 2 &pcie_intc1 1>, |
| <0 0 0 3 &pcie_intc1 2>, |
| <0 0 0 4 &pcie_intc1 3>; |
| pcie_intc1: interrupt-controller { |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| }; |
| }; |
| |
| sata: sata@1a200000 { |
| compatible = "mediatek,mt7622-ahci", |
| "mediatek,mtk-ahci"; |
| reg = <0 0x1a200000 0 0x1100>; |
| interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "hostc"; |
| clocks = <&pciesys CLK_SATA_AHB_EN>, |
| <&pciesys CLK_SATA_AXI_EN>, |
| <&pciesys CLK_SATA_ASIC_EN>, |
| <&pciesys CLK_SATA_RBC_EN>, |
| <&pciesys CLK_SATA_PM_EN>; |
| clock-names = "ahb", "axi", "asic", "rbc", "pm"; |
| phys = <&sata_port PHY_TYPE_SATA>; |
| phy-names = "sata-phy"; |
| ports-implemented = <0x1>; |
| power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; |
| resets = <&pciesys MT7622_SATA_AXI_BUS_RST>, |
| <&pciesys MT7622_SATA_PHY_SW_RST>, |
| <&pciesys MT7622_SATA_PHY_REG_RST>; |
| reset-names = "axi", "sw", "reg"; |
| mediatek,phy-mode = <&pciesys>; |
| status = "disabled"; |
| }; |
| |
| sata_phy: t-phy@1a243000 { |
| compatible = "mediatek,mt7622-tphy", |
| "mediatek,generic-tphy-v1"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| status = "disabled"; |
| |
| sata_port: sata-phy@1a243000 { |
| reg = <0 0x1a243000 0 0x0100>; |
| clocks = <&topckgen CLK_TOP_ETH_500M>; |
| clock-names = "ref"; |
| #phy-cells = <1>; |
| }; |
| }; |
| |
| ethsys: syscon@1b000000 { |
| compatible = "mediatek,mt7622-ethsys", |
| "syscon"; |
| reg = <0 0x1b000000 0 0x1000>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| hsdma: dma-controller@1b007000 { |
| compatible = "mediatek,mt7622-hsdma"; |
| reg = <0 0x1b007000 0 0x1000>; |
| interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <ðsys CLK_ETH_HSDMA_EN>; |
| clock-names = "hsdma"; |
| power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>; |
| #dma-cells = <1>; |
| }; |
| |
| eth: ethernet@1b100000 { |
| compatible = "mediatek,mt7622-eth", |
| "mediatek,mt2701-eth", |
| "syscon"; |
| reg = <0 0x1b100000 0 0x20000>; |
| interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&topckgen CLK_TOP_ETH_SEL>, |
| <ðsys CLK_ETH_ESW_EN>, |
| <ðsys CLK_ETH_GP0_EN>, |
| <ðsys CLK_ETH_GP1_EN>, |
| <ðsys CLK_ETH_GP2_EN>, |
| <&sgmiisys CLK_SGMII_TX250M_EN>, |
| <&sgmiisys CLK_SGMII_RX250M_EN>, |
| <&sgmiisys CLK_SGMII_CDR_REF>, |
| <&sgmiisys CLK_SGMII_CDR_FB>, |
| <&topckgen CLK_TOP_SGMIIPLL>, |
| <&apmixedsys CLK_APMIXED_ETH2PLL>; |
| clock-names = "ethif", "esw", "gp0", "gp1", "gp2", |
| "sgmii_tx250m", "sgmii_rx250m", |
| "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck", |
| "eth2pll"; |
| power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>; |
| mediatek,ethsys = <ðsys>; |
| mediatek,sgmiisys = <&sgmiisys>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| sgmiisys: sgmiisys@1b128000 { |
| compatible = "mediatek,mt7622-sgmiisys", |
| "syscon"; |
| reg = <0 0x1b128000 0 0x3000>; |
| #clock-cells = <1>; |
| }; |
| }; |