| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * dts file for Xilinx ZynqMP zc1751-xm019-dc5 |
| * |
| * (C) Copyright 2015 - 2021, Xilinx, Inc. |
| * |
| * Siva Durga Prasad <siva.durga.paladugu@xilinx.com> |
| * Michal Simek <michal.simek@xilinx.com> |
| */ |
| |
| /dts-v1/; |
| |
| #include "zynqmp.dtsi" |
| #include "zynqmp-clk-ccf.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/pinctrl/pinctrl-zynqmp.h> |
| |
| / { |
| model = "ZynqMP zc1751-xm019-dc5 RevA"; |
| compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; |
| |
| aliases { |
| ethernet0 = &gem1; |
| i2c0 = &i2c0; |
| i2c1 = &i2c1; |
| mmc0 = &sdhci0; |
| serial0 = &uart0; |
| serial1 = &uart1; |
| }; |
| |
| chosen { |
| bootargs = "earlycon"; |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| memory@0 { |
| device_type = "memory"; |
| reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; |
| }; |
| }; |
| |
| &fpd_dma_chan1 { |
| status = "okay"; |
| }; |
| |
| &fpd_dma_chan2 { |
| status = "okay"; |
| }; |
| |
| &fpd_dma_chan3 { |
| status = "okay"; |
| }; |
| |
| &fpd_dma_chan4 { |
| status = "okay"; |
| }; |
| |
| &fpd_dma_chan5 { |
| status = "okay"; |
| }; |
| |
| &fpd_dma_chan6 { |
| status = "okay"; |
| }; |
| |
| &fpd_dma_chan7 { |
| status = "okay"; |
| }; |
| |
| &fpd_dma_chan8 { |
| status = "okay"; |
| }; |
| |
| &gem1 { |
| status = "okay"; |
| phy-handle = <&phy0>; |
| phy-mode = "rgmii-id"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gem1_default>; |
| phy0: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| }; |
| |
| &gpio { |
| status = "okay"; |
| }; |
| |
| &i2c0 { |
| status = "okay"; |
| pinctrl-names = "default", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c0_default>; |
| pinctrl-1 = <&pinctrl_i2c0_gpio>; |
| scl-gpios = <&gpio 74 GPIO_ACTIVE_HIGH>; |
| sda-gpios = <&gpio 75 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| &i2c1 { |
| status = "okay"; |
| pinctrl-names = "default", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c1_default>; |
| pinctrl-1 = <&pinctrl_i2c1_gpio>; |
| scl-gpios = <&gpio 76 GPIO_ACTIVE_HIGH>; |
| sda-gpios = <&gpio 77 GPIO_ACTIVE_HIGH>; |
| |
| }; |
| |
| &pinctrl0 { |
| status = "okay"; |
| pinctrl_i2c0_default: i2c0-default { |
| mux { |
| groups = "i2c0_18_grp"; |
| function = "i2c0"; |
| }; |
| |
| conf { |
| groups = "i2c0_18_grp"; |
| bias-pull-up; |
| slew-rate = <SLEW_RATE_SLOW>; |
| power-source = <IO_STANDARD_LVCMOS18>; |
| }; |
| }; |
| |
| pinctrl_i2c0_gpio: i2c0-gpio { |
| mux { |
| groups = "gpio0_74_grp", "gpio0_75_grp"; |
| function = "gpio0"; |
| }; |
| |
| conf { |
| groups = "gpio0_74_grp", "gpio0_75_grp"; |
| slew-rate = <SLEW_RATE_SLOW>; |
| power-source = <IO_STANDARD_LVCMOS18>; |
| }; |
| }; |
| |
| pinctrl_i2c1_default: i2c1-default { |
| mux { |
| groups = "i2c1_19_grp"; |
| function = "i2c1"; |
| }; |
| |
| conf { |
| groups = "i2c1_19_grp"; |
| bias-pull-up; |
| slew-rate = <SLEW_RATE_SLOW>; |
| power-source = <IO_STANDARD_LVCMOS18>; |
| }; |
| }; |
| |
| pinctrl_i2c1_gpio: i2c1-gpio { |
| mux { |
| groups = "gpio0_76_grp", "gpio0_77_grp"; |
| function = "gpio0"; |
| }; |
| |
| conf { |
| groups = "gpio0_76_grp", "gpio0_77_grp"; |
| slew-rate = <SLEW_RATE_SLOW>; |
| power-source = <IO_STANDARD_LVCMOS18>; |
| }; |
| }; |
| |
| pinctrl_uart0_default: uart0-default { |
| mux { |
| groups = "uart0_17_grp"; |
| function = "uart0"; |
| }; |
| |
| conf { |
| groups = "uart0_17_grp"; |
| slew-rate = <SLEW_RATE_SLOW>; |
| power-source = <IO_STANDARD_LVCMOS18>; |
| }; |
| |
| conf-rx { |
| pins = "MIO70"; |
| bias-high-impedance; |
| }; |
| |
| conf-tx { |
| pins = "MIO71"; |
| bias-disable; |
| }; |
| }; |
| |
| pinctrl_uart1_default: uart1-default { |
| mux { |
| groups = "uart1_18_grp"; |
| function = "uart1"; |
| }; |
| |
| conf { |
| groups = "uart1_18_grp"; |
| slew-rate = <SLEW_RATE_SLOW>; |
| power-source = <IO_STANDARD_LVCMOS18>; |
| }; |
| |
| conf-rx { |
| pins = "MIO73"; |
| bias-high-impedance; |
| }; |
| |
| conf-tx { |
| pins = "MIO72"; |
| bias-disable; |
| }; |
| }; |
| |
| pinctrl_gem1_default: gem1-default { |
| mux { |
| function = "ethernet1"; |
| groups = "ethernet1_0_grp"; |
| }; |
| |
| conf { |
| groups = "ethernet1_0_grp"; |
| slew-rate = <SLEW_RATE_SLOW>; |
| power-source = <IO_STANDARD_LVCMOS18>; |
| }; |
| |
| conf-rx { |
| pins = "MIO44", "MIO45", "MIO46", "MIO47", "MIO48", |
| "MIO49"; |
| bias-high-impedance; |
| low-power-disable; |
| }; |
| |
| conf-tx { |
| pins = "MIO38", "MIO39", "MIO40", "MIO41", "MIO42", |
| "MIO43"; |
| bias-disable; |
| low-power-enable; |
| }; |
| |
| mux-mdio { |
| function = "mdio1"; |
| groups = "mdio1_0_grp"; |
| }; |
| |
| conf-mdio { |
| groups = "mdio1_0_grp"; |
| slew-rate = <SLEW_RATE_SLOW>; |
| power-source = <IO_STANDARD_LVCMOS18>; |
| bias-disable; |
| }; |
| }; |
| |
| pinctrl_sdhci0_default: sdhci0-default { |
| mux { |
| groups = "sdio0_0_grp"; |
| function = "sdio0"; |
| }; |
| |
| conf { |
| groups = "sdio0_0_grp"; |
| slew-rate = <SLEW_RATE_SLOW>; |
| power-source = <IO_STANDARD_LVCMOS18>; |
| bias-disable; |
| }; |
| |
| mux-cd { |
| groups = "sdio0_cd_0_grp"; |
| function = "sdio0_cd"; |
| }; |
| |
| conf-cd { |
| groups = "sdio0_cd_0_grp"; |
| bias-high-impedance; |
| bias-pull-up; |
| slew-rate = <SLEW_RATE_SLOW>; |
| power-source = <IO_STANDARD_LVCMOS18>; |
| }; |
| |
| mux-wp { |
| groups = "sdio0_wp_0_grp"; |
| function = "sdio0_wp"; |
| }; |
| |
| conf-wp { |
| groups = "sdio0_wp_0_grp"; |
| bias-high-impedance; |
| bias-pull-up; |
| slew-rate = <SLEW_RATE_SLOW>; |
| power-source = <IO_STANDARD_LVCMOS18>; |
| }; |
| }; |
| |
| pinctrl_watchdog0_default: watchdog0-default { |
| mux-clk { |
| groups = "swdt0_clk_1_grp"; |
| function = "swdt0_clk"; |
| }; |
| |
| conf-clk { |
| groups = "swdt0_clk_1_grp"; |
| bias-pull-up; |
| }; |
| |
| mux-rst { |
| groups = "swdt0_rst_1_grp"; |
| function = "swdt0_rst"; |
| }; |
| |
| conf-rst { |
| groups = "swdt0_rst_1_grp"; |
| bias-disable; |
| slew-rate = <SLEW_RATE_SLOW>; |
| }; |
| }; |
| |
| pinctrl_ttc0_default: ttc0-default { |
| mux-clk { |
| groups = "ttc0_clk_0_grp"; |
| function = "ttc0_clk"; |
| }; |
| |
| conf-clk { |
| groups = "ttc0_clk_0_grp"; |
| bias-pull-up; |
| }; |
| |
| mux-wav { |
| groups = "ttc0_wav_0_grp"; |
| function = "ttc0_wav"; |
| }; |
| |
| conf-wav { |
| groups = "ttc0_wav_0_grp"; |
| bias-disable; |
| slew-rate = <SLEW_RATE_SLOW>; |
| }; |
| }; |
| |
| pinctrl_ttc1_default: ttc1-default { |
| mux-clk { |
| groups = "ttc1_clk_0_grp"; |
| function = "ttc1_clk"; |
| }; |
| |
| conf-clk { |
| groups = "ttc1_clk_0_grp"; |
| bias-pull-up; |
| }; |
| |
| mux-wav { |
| groups = "ttc1_wav_0_grp"; |
| function = "ttc1_wav"; |
| }; |
| |
| conf-wav { |
| groups = "ttc1_wav_0_grp"; |
| bias-disable; |
| slew-rate = <SLEW_RATE_SLOW>; |
| }; |
| }; |
| |
| pinctrl_ttc2_default: ttc2-default { |
| mux-clk { |
| groups = "ttc2_clk_0_grp"; |
| function = "ttc2_clk"; |
| }; |
| |
| conf-clk { |
| groups = "ttc2_clk_0_grp"; |
| bias-pull-up; |
| }; |
| |
| mux-wav { |
| groups = "ttc2_wav_0_grp"; |
| function = "ttc2_wav"; |
| }; |
| |
| conf-wav { |
| groups = "ttc2_wav_0_grp"; |
| bias-disable; |
| slew-rate = <SLEW_RATE_SLOW>; |
| }; |
| }; |
| |
| pinctrl_ttc3_default: ttc3-default { |
| mux-clk { |
| groups = "ttc3_clk_0_grp"; |
| function = "ttc3_clk"; |
| }; |
| |
| conf-clk { |
| groups = "ttc3_clk_0_grp"; |
| bias-pull-up; |
| }; |
| |
| mux-wav { |
| groups = "ttc3_wav_0_grp"; |
| function = "ttc3_wav"; |
| }; |
| |
| conf-wav { |
| groups = "ttc3_wav_0_grp"; |
| bias-disable; |
| slew-rate = <SLEW_RATE_SLOW>; |
| }; |
| }; |
| }; |
| |
| &sdhci0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sdhci0_default>; |
| no-1-8-v; |
| xlnx,mio-bank = <0>; |
| }; |
| |
| &ttc0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ttc0_default>; |
| }; |
| |
| &ttc1 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ttc1_default>; |
| }; |
| |
| &ttc2 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ttc2_default>; |
| }; |
| |
| &ttc3 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ttc3_default>; |
| }; |
| |
| &uart0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart0_default>; |
| }; |
| |
| &uart1 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1_default>; |
| }; |
| |
| &watchdog0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_watchdog0_default>; |
| }; |