| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Hardware monitoring driver for Infineon Multi-phase Digital VR Controllers |
| * |
| * Copyright (c) 2020 Mellanox Technologies. All rights reserved. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include "pmbus.h" |
| |
| #define XDPE122_PROT_VR12_5MV 0x01 /* VR12.0 mode, 5-mV DAC */ |
| #define XDPE122_PROT_VR12_5_10MV 0x02 /* VR12.5 mode, 10-mV DAC */ |
| #define XDPE122_PROT_IMVP9_10MV 0x03 /* IMVP9 mode, 10-mV DAC */ |
| #define XDPE122_AMD_625MV 0x10 /* AMD mode 6.25mV */ |
| #define XDPE122_PAGE_NUM 2 |
| |
| static int xdpe122_read_word_data(struct i2c_client *client, int page, |
| int phase, int reg) |
| { |
| const struct pmbus_driver_info *info = pmbus_get_driver_info(client); |
| long val; |
| s16 exponent; |
| s32 mantissa; |
| int ret; |
| |
| switch (reg) { |
| case PMBUS_VOUT_OV_FAULT_LIMIT: |
| case PMBUS_VOUT_UV_FAULT_LIMIT: |
| ret = pmbus_read_word_data(client, page, phase, reg); |
| if (ret < 0) |
| return ret; |
| |
| /* Convert register value to LINEAR11 data. */ |
| exponent = ((s16)ret) >> 11; |
| mantissa = ((s16)((ret & GENMASK(10, 0)) << 5)) >> 5; |
| val = mantissa * 1000L; |
| if (exponent >= 0) |
| val <<= exponent; |
| else |
| val >>= -exponent; |
| |
| /* Convert data to VID register. */ |
| switch (info->vrm_version[page]) { |
| case vr13: |
| if (val >= 500) |
| return 1 + DIV_ROUND_CLOSEST(val - 500, 10); |
| return 0; |
| case vr12: |
| if (val >= 250) |
| return 1 + DIV_ROUND_CLOSEST(val - 250, 5); |
| return 0; |
| case imvp9: |
| if (val >= 200) |
| return 1 + DIV_ROUND_CLOSEST(val - 200, 10); |
| return 0; |
| case amd625mv: |
| if (val >= 200 && val <= 1550) |
| return DIV_ROUND_CLOSEST((1550 - val) * 100, |
| 625); |
| return 0; |
| default: |
| return -EINVAL; |
| } |
| default: |
| return -ENODATA; |
| } |
| |
| return 0; |
| } |
| |
| static int xdpe122_identify(struct i2c_client *client, |
| struct pmbus_driver_info *info) |
| { |
| u8 vout_params; |
| int i, ret; |
| |
| for (i = 0; i < XDPE122_PAGE_NUM; i++) { |
| /* Read the register with VOUT scaling value.*/ |
| ret = pmbus_read_byte_data(client, i, PMBUS_VOUT_MODE); |
| if (ret < 0) |
| return ret; |
| |
| vout_params = ret & GENMASK(4, 0); |
| |
| switch (vout_params) { |
| case XDPE122_PROT_VR12_5_10MV: |
| info->vrm_version[i] = vr13; |
| break; |
| case XDPE122_PROT_VR12_5MV: |
| info->vrm_version[i] = vr12; |
| break; |
| case XDPE122_PROT_IMVP9_10MV: |
| info->vrm_version[i] = imvp9; |
| break; |
| case XDPE122_AMD_625MV: |
| info->vrm_version[i] = amd625mv; |
| break; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static struct pmbus_driver_info xdpe122_info = { |
| .pages = XDPE122_PAGE_NUM, |
| .format[PSC_VOLTAGE_IN] = linear, |
| .format[PSC_VOLTAGE_OUT] = vid, |
| .format[PSC_TEMPERATURE] = linear, |
| .format[PSC_CURRENT_IN] = linear, |
| .format[PSC_CURRENT_OUT] = linear, |
| .format[PSC_POWER] = linear, |
| .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | |
| PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | |
| PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | |
| PMBUS_HAVE_POUT | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT, |
| .func[1] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | |
| PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | |
| PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | |
| PMBUS_HAVE_POUT | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT, |
| .identify = xdpe122_identify, |
| .read_word_data = xdpe122_read_word_data, |
| }; |
| |
| static int xdpe122_probe(struct i2c_client *client) |
| { |
| struct pmbus_driver_info *info; |
| |
| info = devm_kmemdup(&client->dev, &xdpe122_info, sizeof(*info), |
| GFP_KERNEL); |
| if (!info) |
| return -ENOMEM; |
| |
| return pmbus_do_probe(client, info); |
| } |
| |
| static const struct i2c_device_id xdpe122_id[] = { |
| {"xdpe12254", 0}, |
| {"xdpe12284", 0}, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(i2c, xdpe122_id); |
| |
| static const struct of_device_id __maybe_unused xdpe122_of_match[] = { |
| {.compatible = "infineon,xdpe12254"}, |
| {.compatible = "infineon,xdpe12284"}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, xdpe122_of_match); |
| |
| static struct i2c_driver xdpe122_driver = { |
| .driver = { |
| .name = "xdpe12284", |
| .of_match_table = of_match_ptr(xdpe122_of_match), |
| }, |
| .probe_new = xdpe122_probe, |
| .id_table = xdpe122_id, |
| }; |
| |
| module_i2c_driver(xdpe122_driver); |
| |
| MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>"); |
| MODULE_DESCRIPTION("PMBus driver for Infineon XDPE122 family"); |
| MODULE_LICENSE("GPL"); |
| MODULE_IMPORT_NS(PMBUS); |