| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * lpc32xx_adc.c - Support for ADC in LPC32XX |
| * |
| * 3-channel, 10-bit ADC |
| * |
| * Copyright (C) 2011, 2012 Roland Stigge <stigge@antcom.de> |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/completion.h> |
| #include <linux/err.h> |
| #include <linux/iio/iio.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/consumer.h> |
| |
| /* |
| * LPC32XX registers definitions |
| */ |
| #define LPC32XXAD_SELECT(x) ((x) + 0x04) |
| #define LPC32XXAD_CTRL(x) ((x) + 0x08) |
| #define LPC32XXAD_VALUE(x) ((x) + 0x48) |
| |
| /* Bit definitions for LPC32XXAD_SELECT: */ |
| /* constant, always write this value! */ |
| #define LPC32XXAD_REFm 0x00000200 |
| /* constant, always write this value! */ |
| #define LPC32XXAD_REFp 0x00000080 |
| /* multiple of this is the channel number: 0, 1, 2 */ |
| #define LPC32XXAD_IN 0x00000010 |
| /* constant, always write this value! */ |
| #define LPC32XXAD_INTERNAL 0x00000004 |
| |
| /* Bit definitions for LPC32XXAD_CTRL: */ |
| #define LPC32XXAD_STROBE 0x00000002 |
| #define LPC32XXAD_PDN_CTRL 0x00000004 |
| |
| /* Bit definitions for LPC32XXAD_VALUE: */ |
| #define LPC32XXAD_VALUE_MASK 0x000003FF |
| |
| #define LPC32XXAD_NAME "lpc32xx-adc" |
| |
| struct lpc32xx_adc_state { |
| void __iomem *adc_base; |
| struct clk *clk; |
| struct completion completion; |
| struct regulator *vref; |
| |
| u32 value; |
| }; |
| |
| static int lpc32xx_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, |
| int *val2, |
| long mask) |
| { |
| struct lpc32xx_adc_state *st = iio_priv(indio_dev); |
| int ret; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| mutex_lock(&indio_dev->mlock); |
| ret = clk_prepare_enable(st->clk); |
| if (ret) { |
| mutex_unlock(&indio_dev->mlock); |
| return ret; |
| } |
| /* Measurement setup */ |
| __raw_writel(LPC32XXAD_INTERNAL | (chan->address) | |
| LPC32XXAD_REFp | LPC32XXAD_REFm, |
| LPC32XXAD_SELECT(st->adc_base)); |
| /* Trigger conversion */ |
| __raw_writel(LPC32XXAD_PDN_CTRL | LPC32XXAD_STROBE, |
| LPC32XXAD_CTRL(st->adc_base)); |
| wait_for_completion(&st->completion); /* set by ISR */ |
| clk_disable_unprepare(st->clk); |
| *val = st->value; |
| mutex_unlock(&indio_dev->mlock); |
| |
| return IIO_VAL_INT; |
| |
| case IIO_CHAN_INFO_SCALE: |
| *val = regulator_get_voltage(st->vref) / 1000; |
| *val2 = 10; |
| |
| return IIO_VAL_FRACTIONAL_LOG2; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static const struct iio_info lpc32xx_adc_iio_info = { |
| .read_raw = &lpc32xx_read_raw, |
| }; |
| |
| #define LPC32XX_ADC_CHANNEL_BASE(_index) \ |
| .type = IIO_VOLTAGE, \ |
| .indexed = 1, \ |
| .channel = _index, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| .address = LPC32XXAD_IN * _index, \ |
| .scan_index = _index, |
| |
| #define LPC32XX_ADC_CHANNEL(_index) { \ |
| LPC32XX_ADC_CHANNEL_BASE(_index) \ |
| } |
| |
| #define LPC32XX_ADC_SCALE_CHANNEL(_index) { \ |
| LPC32XX_ADC_CHANNEL_BASE(_index) \ |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \ |
| } |
| |
| static const struct iio_chan_spec lpc32xx_adc_iio_channels[] = { |
| LPC32XX_ADC_CHANNEL(0), |
| LPC32XX_ADC_CHANNEL(1), |
| LPC32XX_ADC_CHANNEL(2), |
| }; |
| |
| static const struct iio_chan_spec lpc32xx_adc_iio_scale_channels[] = { |
| LPC32XX_ADC_SCALE_CHANNEL(0), |
| LPC32XX_ADC_SCALE_CHANNEL(1), |
| LPC32XX_ADC_SCALE_CHANNEL(2), |
| }; |
| |
| static irqreturn_t lpc32xx_adc_isr(int irq, void *dev_id) |
| { |
| struct lpc32xx_adc_state *st = dev_id; |
| |
| /* Read value and clear irq */ |
| st->value = __raw_readl(LPC32XXAD_VALUE(st->adc_base)) & |
| LPC32XXAD_VALUE_MASK; |
| complete(&st->completion); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int lpc32xx_adc_probe(struct platform_device *pdev) |
| { |
| struct lpc32xx_adc_state *st = NULL; |
| struct resource *res; |
| int retval = -ENODEV; |
| struct iio_dev *iodev = NULL; |
| int irq; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(&pdev->dev, "failed to get platform I/O memory\n"); |
| return -ENXIO; |
| } |
| |
| iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); |
| if (!iodev) |
| return -ENOMEM; |
| |
| st = iio_priv(iodev); |
| |
| st->adc_base = devm_ioremap(&pdev->dev, res->start, |
| resource_size(res)); |
| if (!st->adc_base) { |
| dev_err(&pdev->dev, "failed mapping memory\n"); |
| return -EBUSY; |
| } |
| |
| st->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(st->clk)) { |
| dev_err(&pdev->dev, "failed getting clock\n"); |
| return PTR_ERR(st->clk); |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq <= 0) |
| return -ENXIO; |
| |
| retval = devm_request_irq(&pdev->dev, irq, lpc32xx_adc_isr, 0, |
| LPC32XXAD_NAME, st); |
| if (retval < 0) { |
| dev_err(&pdev->dev, "failed requesting interrupt\n"); |
| return retval; |
| } |
| |
| st->vref = devm_regulator_get(&pdev->dev, "vref"); |
| if (IS_ERR(st->vref)) { |
| iodev->channels = lpc32xx_adc_iio_channels; |
| dev_info(&pdev->dev, |
| "Missing vref regulator: No scaling available\n"); |
| } else { |
| iodev->channels = lpc32xx_adc_iio_scale_channels; |
| } |
| |
| platform_set_drvdata(pdev, iodev); |
| |
| init_completion(&st->completion); |
| |
| iodev->name = LPC32XXAD_NAME; |
| iodev->info = &lpc32xx_adc_iio_info; |
| iodev->modes = INDIO_DIRECT_MODE; |
| iodev->num_channels = ARRAY_SIZE(lpc32xx_adc_iio_channels); |
| |
| retval = devm_iio_device_register(&pdev->dev, iodev); |
| if (retval) |
| return retval; |
| |
| dev_info(&pdev->dev, "LPC32XX ADC driver loaded, IRQ %d\n", irq); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id lpc32xx_adc_match[] = { |
| { .compatible = "nxp,lpc3220-adc" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, lpc32xx_adc_match); |
| |
| static struct platform_driver lpc32xx_adc_driver = { |
| .probe = lpc32xx_adc_probe, |
| .driver = { |
| .name = LPC32XXAD_NAME, |
| .of_match_table = lpc32xx_adc_match, |
| }, |
| }; |
| |
| module_platform_driver(lpc32xx_adc_driver); |
| |
| MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>"); |
| MODULE_DESCRIPTION("LPC32XX ADC driver"); |
| MODULE_LICENSE("GPL"); |