| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright(c) 2015 EZchip Technologies. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/etherdevice.h> |
| #include <linux/interrupt.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_net.h> |
| #include <linux/of_platform.h> |
| #include "nps_enet.h" |
| |
| #define DRV_NAME "nps_mgt_enet" |
| |
| static inline bool nps_enet_is_tx_pending(struct nps_enet_priv *priv) |
| { |
| u32 tx_ctrl_value = nps_enet_reg_get(priv, NPS_ENET_REG_TX_CTL); |
| u32 tx_ctrl_ct = (tx_ctrl_value & TX_CTL_CT_MASK) >> TX_CTL_CT_SHIFT; |
| |
| return (!tx_ctrl_ct && priv->tx_skb); |
| } |
| |
| static void nps_enet_clean_rx_fifo(struct net_device *ndev, u32 frame_len) |
| { |
| struct nps_enet_priv *priv = netdev_priv(ndev); |
| u32 i, len = DIV_ROUND_UP(frame_len, sizeof(u32)); |
| |
| /* Empty Rx FIFO buffer by reading all words */ |
| for (i = 0; i < len; i++) |
| nps_enet_reg_get(priv, NPS_ENET_REG_RX_BUF); |
| } |
| |
| static void nps_enet_read_rx_fifo(struct net_device *ndev, |
| unsigned char *dst, u32 length) |
| { |
| struct nps_enet_priv *priv = netdev_priv(ndev); |
| s32 i, last = length & (sizeof(u32) - 1); |
| u32 *reg = (u32 *)dst, len = length / sizeof(u32); |
| bool dst_is_aligned = IS_ALIGNED((unsigned long)dst, sizeof(u32)); |
| |
| /* In case dst is not aligned we need an intermediate buffer */ |
| if (dst_is_aligned) { |
| ioread32_rep(priv->regs_base + NPS_ENET_REG_RX_BUF, reg, len); |
| reg += len; |
| } else { /* !dst_is_aligned */ |
| for (i = 0; i < len; i++, reg++) { |
| u32 buf = nps_enet_reg_get(priv, NPS_ENET_REG_RX_BUF); |
| |
| put_unaligned_be32(buf, reg); |
| } |
| } |
| /* copy last bytes (if any) */ |
| if (last) { |
| u32 buf; |
| |
| ioread32_rep(priv->regs_base + NPS_ENET_REG_RX_BUF, &buf, 1); |
| memcpy((u8 *)reg, &buf, last); |
| } |
| } |
| |
| static u32 nps_enet_rx_handler(struct net_device *ndev) |
| { |
| u32 frame_len, err = 0; |
| u32 work_done = 0; |
| struct nps_enet_priv *priv = netdev_priv(ndev); |
| struct sk_buff *skb; |
| u32 rx_ctrl_value = nps_enet_reg_get(priv, NPS_ENET_REG_RX_CTL); |
| u32 rx_ctrl_cr = (rx_ctrl_value & RX_CTL_CR_MASK) >> RX_CTL_CR_SHIFT; |
| u32 rx_ctrl_er = (rx_ctrl_value & RX_CTL_ER_MASK) >> RX_CTL_ER_SHIFT; |
| u32 rx_ctrl_crc = (rx_ctrl_value & RX_CTL_CRC_MASK) >> RX_CTL_CRC_SHIFT; |
| |
| frame_len = (rx_ctrl_value & RX_CTL_NR_MASK) >> RX_CTL_NR_SHIFT; |
| |
| /* Check if we got RX */ |
| if (!rx_ctrl_cr) |
| return work_done; |
| |
| /* If we got here there is a work for us */ |
| work_done++; |
| |
| /* Check Rx error */ |
| if (rx_ctrl_er) { |
| ndev->stats.rx_errors++; |
| err = 1; |
| } |
| |
| /* Check Rx CRC error */ |
| if (rx_ctrl_crc) { |
| ndev->stats.rx_crc_errors++; |
| ndev->stats.rx_dropped++; |
| err = 1; |
| } |
| |
| /* Check Frame length Min 64b */ |
| if (unlikely(frame_len < ETH_ZLEN)) { |
| ndev->stats.rx_length_errors++; |
| ndev->stats.rx_dropped++; |
| err = 1; |
| } |
| |
| if (err) |
| goto rx_irq_clean; |
| |
| /* Skb allocation */ |
| skb = netdev_alloc_skb_ip_align(ndev, frame_len); |
| if (unlikely(!skb)) { |
| ndev->stats.rx_errors++; |
| ndev->stats.rx_dropped++; |
| goto rx_irq_clean; |
| } |
| |
| /* Copy frame from Rx fifo into the skb */ |
| nps_enet_read_rx_fifo(ndev, skb->data, frame_len); |
| |
| skb_put(skb, frame_len); |
| skb->protocol = eth_type_trans(skb, ndev); |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| |
| ndev->stats.rx_packets++; |
| ndev->stats.rx_bytes += frame_len; |
| netif_receive_skb(skb); |
| |
| goto rx_irq_frame_done; |
| |
| rx_irq_clean: |
| /* Clean Rx fifo */ |
| nps_enet_clean_rx_fifo(ndev, frame_len); |
| |
| rx_irq_frame_done: |
| /* Ack Rx ctrl register */ |
| nps_enet_reg_set(priv, NPS_ENET_REG_RX_CTL, 0); |
| |
| return work_done; |
| } |
| |
| static void nps_enet_tx_handler(struct net_device *ndev) |
| { |
| struct nps_enet_priv *priv = netdev_priv(ndev); |
| u32 tx_ctrl_value = nps_enet_reg_get(priv, NPS_ENET_REG_TX_CTL); |
| u32 tx_ctrl_et = (tx_ctrl_value & TX_CTL_ET_MASK) >> TX_CTL_ET_SHIFT; |
| u32 tx_ctrl_nt = (tx_ctrl_value & TX_CTL_NT_MASK) >> TX_CTL_NT_SHIFT; |
| |
| /* Check if we got TX */ |
| if (!nps_enet_is_tx_pending(priv)) |
| return; |
| |
| /* Ack Tx ctrl register */ |
| nps_enet_reg_set(priv, NPS_ENET_REG_TX_CTL, 0); |
| |
| /* Check Tx transmit error */ |
| if (unlikely(tx_ctrl_et)) { |
| ndev->stats.tx_errors++; |
| } else { |
| ndev->stats.tx_packets++; |
| ndev->stats.tx_bytes += tx_ctrl_nt; |
| } |
| |
| dev_kfree_skb(priv->tx_skb); |
| priv->tx_skb = NULL; |
| |
| if (netif_queue_stopped(ndev)) |
| netif_wake_queue(ndev); |
| } |
| |
| /** |
| * nps_enet_poll - NAPI poll handler. |
| * @napi: Pointer to napi_struct structure. |
| * @budget: How many frames to process on one call. |
| * |
| * returns: Number of processed frames |
| */ |
| static int nps_enet_poll(struct napi_struct *napi, int budget) |
| { |
| struct net_device *ndev = napi->dev; |
| struct nps_enet_priv *priv = netdev_priv(ndev); |
| u32 work_done; |
| |
| nps_enet_tx_handler(ndev); |
| work_done = nps_enet_rx_handler(ndev); |
| if ((work_done < budget) && napi_complete_done(napi, work_done)) { |
| u32 buf_int_enable_value = 0; |
| |
| /* set tx_done and rx_rdy bits */ |
| buf_int_enable_value |= NPS_ENET_ENABLE << RX_RDY_SHIFT; |
| buf_int_enable_value |= NPS_ENET_ENABLE << TX_DONE_SHIFT; |
| |
| nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE, |
| buf_int_enable_value); |
| |
| /* in case we will get a tx interrupt while interrupts |
| * are masked, we will lose it since the tx is edge interrupt. |
| * specifically, while executing the code section above, |
| * between nps_enet_tx_handler and the interrupts enable, all |
| * tx requests will be stuck until we will get an rx interrupt. |
| * the two code lines below will solve this situation by |
| * re-adding ourselves to the poll list. |
| */ |
| if (nps_enet_is_tx_pending(priv)) { |
| nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE, 0); |
| napi_reschedule(napi); |
| } |
| } |
| |
| return work_done; |
| } |
| |
| /** |
| * nps_enet_irq_handler - Global interrupt handler for ENET. |
| * @irq: irq number. |
| * @dev_instance: device instance. |
| * |
| * returns: IRQ_HANDLED for all cases. |
| * |
| * EZchip ENET has 2 interrupt causes, and depending on bits raised in |
| * CTRL registers we may tell what is a reason for interrupt to fire up. |
| * We got one for RX and the other for TX (completion). |
| */ |
| static irqreturn_t nps_enet_irq_handler(s32 irq, void *dev_instance) |
| { |
| struct net_device *ndev = dev_instance; |
| struct nps_enet_priv *priv = netdev_priv(ndev); |
| u32 rx_ctrl_value = nps_enet_reg_get(priv, NPS_ENET_REG_RX_CTL); |
| u32 rx_ctrl_cr = (rx_ctrl_value & RX_CTL_CR_MASK) >> RX_CTL_CR_SHIFT; |
| |
| if (nps_enet_is_tx_pending(priv) || rx_ctrl_cr) |
| if (likely(napi_schedule_prep(&priv->napi))) { |
| nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE, 0); |
| __napi_schedule(&priv->napi); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void nps_enet_set_hw_mac_address(struct net_device *ndev) |
| { |
| struct nps_enet_priv *priv = netdev_priv(ndev); |
| u32 ge_mac_cfg_1_value = 0; |
| u32 *ge_mac_cfg_2_value = &priv->ge_mac_cfg_2_value; |
| |
| /* set MAC address in HW */ |
| ge_mac_cfg_1_value |= ndev->dev_addr[0] << CFG_1_OCTET_0_SHIFT; |
| ge_mac_cfg_1_value |= ndev->dev_addr[1] << CFG_1_OCTET_1_SHIFT; |
| ge_mac_cfg_1_value |= ndev->dev_addr[2] << CFG_1_OCTET_2_SHIFT; |
| ge_mac_cfg_1_value |= ndev->dev_addr[3] << CFG_1_OCTET_3_SHIFT; |
| *ge_mac_cfg_2_value = (*ge_mac_cfg_2_value & ~CFG_2_OCTET_4_MASK) |
| | ndev->dev_addr[4] << CFG_2_OCTET_4_SHIFT; |
| *ge_mac_cfg_2_value = (*ge_mac_cfg_2_value & ~CFG_2_OCTET_5_MASK) |
| | ndev->dev_addr[5] << CFG_2_OCTET_5_SHIFT; |
| |
| nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_1, |
| ge_mac_cfg_1_value); |
| |
| nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_2, |
| *ge_mac_cfg_2_value); |
| } |
| |
| /** |
| * nps_enet_hw_reset - Reset the network device. |
| * @ndev: Pointer to the network device. |
| * |
| * This function reset the PCS and TX fifo. |
| * The programming model is to set the relevant reset bits |
| * wait for some time for this to propagate and then unset |
| * the reset bits. This way we ensure that reset procedure |
| * is done successfully by device. |
| */ |
| static void nps_enet_hw_reset(struct net_device *ndev) |
| { |
| struct nps_enet_priv *priv = netdev_priv(ndev); |
| u32 ge_rst_value = 0, phase_fifo_ctl_value = 0; |
| |
| /* Pcs reset sequence*/ |
| ge_rst_value |= NPS_ENET_ENABLE << RST_GMAC_0_SHIFT; |
| nps_enet_reg_set(priv, NPS_ENET_REG_GE_RST, ge_rst_value); |
| usleep_range(10, 20); |
| ge_rst_value = 0; |
| nps_enet_reg_set(priv, NPS_ENET_REG_GE_RST, ge_rst_value); |
| |
| /* Tx fifo reset sequence */ |
| phase_fifo_ctl_value |= NPS_ENET_ENABLE << PHASE_FIFO_CTL_RST_SHIFT; |
| phase_fifo_ctl_value |= NPS_ENET_ENABLE << PHASE_FIFO_CTL_INIT_SHIFT; |
| nps_enet_reg_set(priv, NPS_ENET_REG_PHASE_FIFO_CTL, |
| phase_fifo_ctl_value); |
| usleep_range(10, 20); |
| phase_fifo_ctl_value = 0; |
| nps_enet_reg_set(priv, NPS_ENET_REG_PHASE_FIFO_CTL, |
| phase_fifo_ctl_value); |
| } |
| |
| static void nps_enet_hw_enable_control(struct net_device *ndev) |
| { |
| struct nps_enet_priv *priv = netdev_priv(ndev); |
| u32 ge_mac_cfg_0_value = 0, buf_int_enable_value = 0; |
| u32 *ge_mac_cfg_2_value = &priv->ge_mac_cfg_2_value; |
| u32 *ge_mac_cfg_3_value = &priv->ge_mac_cfg_3_value; |
| s32 max_frame_length; |
| |
| /* Enable Rx and Tx statistics */ |
| *ge_mac_cfg_2_value = (*ge_mac_cfg_2_value & ~CFG_2_STAT_EN_MASK) |
| | NPS_ENET_GE_MAC_CFG_2_STAT_EN << CFG_2_STAT_EN_SHIFT; |
| |
| /* Discard packets with different MAC address */ |
| *ge_mac_cfg_2_value = (*ge_mac_cfg_2_value & ~CFG_2_DISK_DA_MASK) |
| | NPS_ENET_ENABLE << CFG_2_DISK_DA_SHIFT; |
| |
| /* Discard multicast packets */ |
| *ge_mac_cfg_2_value = (*ge_mac_cfg_2_value & ~CFG_2_DISK_MC_MASK) |
| | NPS_ENET_ENABLE << CFG_2_DISK_MC_SHIFT; |
| |
| nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_2, |
| *ge_mac_cfg_2_value); |
| |
| /* Discard Packets bigger than max frame length */ |
| max_frame_length = ETH_HLEN + ndev->mtu + ETH_FCS_LEN; |
| if (max_frame_length <= NPS_ENET_MAX_FRAME_LENGTH) { |
| *ge_mac_cfg_3_value = |
| (*ge_mac_cfg_3_value & ~CFG_3_MAX_LEN_MASK) |
| | max_frame_length << CFG_3_MAX_LEN_SHIFT; |
| } |
| |
| /* Enable interrupts */ |
| buf_int_enable_value |= NPS_ENET_ENABLE << RX_RDY_SHIFT; |
| buf_int_enable_value |= NPS_ENET_ENABLE << TX_DONE_SHIFT; |
| nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE, |
| buf_int_enable_value); |
| |
| /* Write device MAC address to HW */ |
| nps_enet_set_hw_mac_address(ndev); |
| |
| /* Rx and Tx HW features */ |
| ge_mac_cfg_0_value |= NPS_ENET_ENABLE << CFG_0_TX_PAD_EN_SHIFT; |
| ge_mac_cfg_0_value |= NPS_ENET_ENABLE << CFG_0_TX_CRC_EN_SHIFT; |
| ge_mac_cfg_0_value |= NPS_ENET_ENABLE << CFG_0_RX_CRC_STRIP_SHIFT; |
| |
| /* IFG configuration */ |
| ge_mac_cfg_0_value |= |
| NPS_ENET_GE_MAC_CFG_0_RX_IFG << CFG_0_RX_IFG_SHIFT; |
| ge_mac_cfg_0_value |= |
| NPS_ENET_GE_MAC_CFG_0_TX_IFG << CFG_0_TX_IFG_SHIFT; |
| |
| /* preamble configuration */ |
| ge_mac_cfg_0_value |= NPS_ENET_ENABLE << CFG_0_RX_PR_CHECK_EN_SHIFT; |
| ge_mac_cfg_0_value |= |
| NPS_ENET_GE_MAC_CFG_0_TX_PR_LEN << CFG_0_TX_PR_LEN_SHIFT; |
| |
| /* enable flow control frames */ |
| ge_mac_cfg_0_value |= NPS_ENET_ENABLE << CFG_0_TX_FC_EN_SHIFT; |
| ge_mac_cfg_0_value |= NPS_ENET_ENABLE << CFG_0_RX_FC_EN_SHIFT; |
| ge_mac_cfg_0_value |= |
| NPS_ENET_GE_MAC_CFG_0_TX_FC_RETR << CFG_0_TX_FC_RETR_SHIFT; |
| *ge_mac_cfg_3_value = (*ge_mac_cfg_3_value & ~CFG_3_CF_DROP_MASK) |
| | NPS_ENET_ENABLE << CFG_3_CF_DROP_SHIFT; |
| |
| /* Enable Rx and Tx */ |
| ge_mac_cfg_0_value |= NPS_ENET_ENABLE << CFG_0_RX_EN_SHIFT; |
| ge_mac_cfg_0_value |= NPS_ENET_ENABLE << CFG_0_TX_EN_SHIFT; |
| |
| nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_3, |
| *ge_mac_cfg_3_value); |
| nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_0, |
| ge_mac_cfg_0_value); |
| } |
| |
| static void nps_enet_hw_disable_control(struct net_device *ndev) |
| { |
| struct nps_enet_priv *priv = netdev_priv(ndev); |
| |
| /* Disable interrupts */ |
| nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE, 0); |
| |
| /* Disable Rx and Tx */ |
| nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_0, 0); |
| } |
| |
| static void nps_enet_send_frame(struct net_device *ndev, |
| struct sk_buff *skb) |
| { |
| struct nps_enet_priv *priv = netdev_priv(ndev); |
| u32 tx_ctrl_value = 0; |
| short length = skb->len; |
| u32 i, len = DIV_ROUND_UP(length, sizeof(u32)); |
| u32 *src = (void *)skb->data; |
| bool src_is_aligned = IS_ALIGNED((unsigned long)src, sizeof(u32)); |
| |
| /* In case src is not aligned we need an intermediate buffer */ |
| if (src_is_aligned) |
| iowrite32_rep(priv->regs_base + NPS_ENET_REG_TX_BUF, src, len); |
| else /* !src_is_aligned */ |
| for (i = 0; i < len; i++, src++) |
| nps_enet_reg_set(priv, NPS_ENET_REG_TX_BUF, |
| get_unaligned_be32(src)); |
| |
| /* Write the length of the Frame */ |
| tx_ctrl_value |= length << TX_CTL_NT_SHIFT; |
| |
| tx_ctrl_value |= NPS_ENET_ENABLE << TX_CTL_CT_SHIFT; |
| /* Send Frame */ |
| nps_enet_reg_set(priv, NPS_ENET_REG_TX_CTL, tx_ctrl_value); |
| } |
| |
| /** |
| * nps_enet_set_mac_address - Set the MAC address for this device. |
| * @ndev: Pointer to net_device structure. |
| * @p: 6 byte Address to be written as MAC address. |
| * |
| * This function copies the HW address from the sockaddr structure to the |
| * net_device structure and updates the address in HW. |
| * |
| * returns: -EBUSY if the net device is busy or 0 if the address is set |
| * successfully. |
| */ |
| static s32 nps_enet_set_mac_address(struct net_device *ndev, void *p) |
| { |
| struct sockaddr *addr = p; |
| s32 res; |
| |
| if (netif_running(ndev)) |
| return -EBUSY; |
| |
| res = eth_mac_addr(ndev, p); |
| if (!res) { |
| eth_hw_addr_set(ndev, addr->sa_data); |
| nps_enet_set_hw_mac_address(ndev); |
| } |
| |
| return res; |
| } |
| |
| /** |
| * nps_enet_set_rx_mode - Change the receive filtering mode. |
| * @ndev: Pointer to the network device. |
| * |
| * This function enables/disables promiscuous mode |
| */ |
| static void nps_enet_set_rx_mode(struct net_device *ndev) |
| { |
| struct nps_enet_priv *priv = netdev_priv(ndev); |
| u32 ge_mac_cfg_2_value = priv->ge_mac_cfg_2_value; |
| |
| if (ndev->flags & IFF_PROMISC) { |
| ge_mac_cfg_2_value = (ge_mac_cfg_2_value & ~CFG_2_DISK_DA_MASK) |
| | NPS_ENET_DISABLE << CFG_2_DISK_DA_SHIFT; |
| ge_mac_cfg_2_value = (ge_mac_cfg_2_value & ~CFG_2_DISK_MC_MASK) |
| | NPS_ENET_DISABLE << CFG_2_DISK_MC_SHIFT; |
| |
| } else { |
| ge_mac_cfg_2_value = (ge_mac_cfg_2_value & ~CFG_2_DISK_DA_MASK) |
| | NPS_ENET_ENABLE << CFG_2_DISK_DA_SHIFT; |
| ge_mac_cfg_2_value = (ge_mac_cfg_2_value & ~CFG_2_DISK_MC_MASK) |
| | NPS_ENET_ENABLE << CFG_2_DISK_MC_SHIFT; |
| } |
| |
| nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_2, ge_mac_cfg_2_value); |
| } |
| |
| /** |
| * nps_enet_open - Open the network device. |
| * @ndev: Pointer to the network device. |
| * |
| * returns: 0, on success or non-zero error value on failure. |
| * |
| * This function sets the MAC address, requests and enables an IRQ |
| * for the ENET device and starts the Tx queue. |
| */ |
| static s32 nps_enet_open(struct net_device *ndev) |
| { |
| struct nps_enet_priv *priv = netdev_priv(ndev); |
| s32 err; |
| |
| /* Reset private variables */ |
| priv->tx_skb = NULL; |
| priv->ge_mac_cfg_2_value = 0; |
| priv->ge_mac_cfg_3_value = 0; |
| |
| /* ge_mac_cfg_3 default values */ |
| priv->ge_mac_cfg_3_value |= |
| NPS_ENET_GE_MAC_CFG_3_RX_IFG_TH << CFG_3_RX_IFG_TH_SHIFT; |
| |
| priv->ge_mac_cfg_3_value |= |
| NPS_ENET_GE_MAC_CFG_3_MAX_LEN << CFG_3_MAX_LEN_SHIFT; |
| |
| /* Disable HW device */ |
| nps_enet_hw_disable_control(ndev); |
| |
| /* irq Rx allocation */ |
| err = request_irq(priv->irq, nps_enet_irq_handler, |
| 0, "enet-rx-tx", ndev); |
| if (err) |
| return err; |
| |
| napi_enable(&priv->napi); |
| |
| /* Enable HW device */ |
| nps_enet_hw_reset(ndev); |
| nps_enet_hw_enable_control(ndev); |
| |
| netif_start_queue(ndev); |
| |
| return 0; |
| } |
| |
| /** |
| * nps_enet_stop - Close the network device. |
| * @ndev: Pointer to the network device. |
| * |
| * This function stops the Tx queue, disables interrupts for the ENET device. |
| */ |
| static s32 nps_enet_stop(struct net_device *ndev) |
| { |
| struct nps_enet_priv *priv = netdev_priv(ndev); |
| |
| napi_disable(&priv->napi); |
| netif_stop_queue(ndev); |
| nps_enet_hw_disable_control(ndev); |
| free_irq(priv->irq, ndev); |
| |
| return 0; |
| } |
| |
| /** |
| * nps_enet_start_xmit - Starts the data transmission. |
| * @skb: sk_buff pointer that contains data to be Transmitted. |
| * @ndev: Pointer to net_device structure. |
| * |
| * returns: NETDEV_TX_OK, on success |
| * NETDEV_TX_BUSY, if any of the descriptors are not free. |
| * |
| * This function is invoked from upper layers to initiate transmission. |
| */ |
| static netdev_tx_t nps_enet_start_xmit(struct sk_buff *skb, |
| struct net_device *ndev) |
| { |
| struct nps_enet_priv *priv = netdev_priv(ndev); |
| |
| /* This driver handles one frame at a time */ |
| netif_stop_queue(ndev); |
| |
| priv->tx_skb = skb; |
| |
| /* make sure tx_skb is actually written to the memory |
| * before the HW is informed and the IRQ is fired. |
| */ |
| wmb(); |
| |
| nps_enet_send_frame(ndev, skb); |
| |
| return NETDEV_TX_OK; |
| } |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| static void nps_enet_poll_controller(struct net_device *ndev) |
| { |
| disable_irq(ndev->irq); |
| nps_enet_irq_handler(ndev->irq, ndev); |
| enable_irq(ndev->irq); |
| } |
| #endif |
| |
| static const struct net_device_ops nps_netdev_ops = { |
| .ndo_open = nps_enet_open, |
| .ndo_stop = nps_enet_stop, |
| .ndo_start_xmit = nps_enet_start_xmit, |
| .ndo_set_mac_address = nps_enet_set_mac_address, |
| .ndo_set_rx_mode = nps_enet_set_rx_mode, |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| .ndo_poll_controller = nps_enet_poll_controller, |
| #endif |
| }; |
| |
| static s32 nps_enet_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct net_device *ndev; |
| struct nps_enet_priv *priv; |
| s32 err = 0; |
| |
| if (!dev->of_node) |
| return -ENODEV; |
| |
| ndev = alloc_etherdev(sizeof(struct nps_enet_priv)); |
| if (!ndev) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, ndev); |
| SET_NETDEV_DEV(ndev, dev); |
| priv = netdev_priv(ndev); |
| |
| /* The EZ NET specific entries in the device structure. */ |
| ndev->netdev_ops = &nps_netdev_ops; |
| ndev->watchdog_timeo = (400 * HZ / 1000); |
| /* FIXME :: no multicast support yet */ |
| ndev->flags &= ~IFF_MULTICAST; |
| |
| priv->regs_base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(priv->regs_base)) { |
| err = PTR_ERR(priv->regs_base); |
| goto out_netdev; |
| } |
| dev_dbg(dev, "Registers base address is 0x%p\n", priv->regs_base); |
| |
| /* set kernel MAC address to dev */ |
| err = of_get_ethdev_address(dev->of_node, ndev); |
| if (err) |
| eth_hw_addr_random(ndev); |
| |
| /* Get IRQ number */ |
| priv->irq = platform_get_irq(pdev, 0); |
| if (priv->irq < 0) { |
| dev_err(dev, "failed to retrieve <irq Rx-Tx> value from device tree\n"); |
| err = -ENODEV; |
| goto out_netdev; |
| } |
| |
| netif_napi_add(ndev, &priv->napi, nps_enet_poll, |
| NPS_ENET_NAPI_POLL_WEIGHT); |
| |
| /* Register the driver. Should be the last thing in probe */ |
| err = register_netdev(ndev); |
| if (err) { |
| dev_err(dev, "Failed to register ndev for %s, err = 0x%08x\n", |
| ndev->name, (s32)err); |
| goto out_netif_api; |
| } |
| |
| dev_info(dev, "(rx/tx=%d)\n", priv->irq); |
| return 0; |
| |
| out_netif_api: |
| netif_napi_del(&priv->napi); |
| out_netdev: |
| free_netdev(ndev); |
| |
| return err; |
| } |
| |
| static s32 nps_enet_remove(struct platform_device *pdev) |
| { |
| struct net_device *ndev = platform_get_drvdata(pdev); |
| struct nps_enet_priv *priv = netdev_priv(ndev); |
| |
| unregister_netdev(ndev); |
| netif_napi_del(&priv->napi); |
| free_netdev(ndev); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id nps_enet_dt_ids[] = { |
| { .compatible = "ezchip,nps-mgt-enet" }, |
| { /* Sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, nps_enet_dt_ids); |
| |
| static struct platform_driver nps_enet_driver = { |
| .probe = nps_enet_probe, |
| .remove = nps_enet_remove, |
| .driver = { |
| .name = DRV_NAME, |
| .of_match_table = nps_enet_dt_ids, |
| }, |
| }; |
| |
| module_platform_driver(nps_enet_driver); |
| |
| MODULE_AUTHOR("EZchip Semiconductor"); |
| MODULE_LICENSE("GPL v2"); |